GC Alignment Tools
MANU
169
CODE
DOUBLE ENDED HEX TOOL
Hex: 5⁄64˝ (0.078˝ -2 mm).
Material: Conductive Nylon. Ends: 1⁄4˝ long hex, 0.096˝ dia. shaft, 3⁄8˝ long hex,
undercut (0.068˝ dia.) shaft to reach bottom slugs in coils. Total Length: 5˝
(12.7 cm).
Cat. No.
AS-9300-0000
Net Price
$2.82
DUPLEX ALIGNMENT SCREWDRIVER
Material: Delrin. Shaft: Long end 7⁄32˝ (5.5 mm) dia., 6˝ (15.2 cm) long; short end
⁄ ˝ (4 mm) dia., 1˝ (2.5 cm) long. Ends: 1⁄32˝ thick screwdriver tip (Both Ends).
Total Length: 7˝ (17.7 cm).
5 32
Cat. No.
00-2520-0000
Net Price
$2.53
COMBINATION ALIGNER
Material: Conductive Nylon. Shaft: long end 1⁄8˝ (3.2 mm) dia., 21⁄2˝ (6.3 cm)
long; short end 7⁄32˝ (5.5 mm) dia., 27⁄16˝ (6.2 cm) long. Ends: 1⁄32˝ thick screwdriver tip (long end); 1⁄8˝ (3.2 mm) wide steel tip, recessed 1⁄16˝ (short end). Total
Length: 415⁄16˝ (12.5 cm).
Cat. No.
AS-8275-0000
Net Price
$3.15
HEX & SPECIAL TIP TOOL
Hex: 0.100˝ (2.5 mm).
Material: Conductive Nylon. Ends: Flat screwdriver tip (0.027˝ thick-.095˝ wide),
followed by 0.100˝ hex; 0.100˝ hex, 7⁄32˝ long, undercut shaft to reach bottom
slugs in coils. Total Length: 53⁄32˝ (12.9 cm).
ANTI-STATIC ALIGNMENT TOOL KIT
Kit contains all nine anti-static alignment tools. The wide range of tip styles and
sizes assures that the user will have a tool for adjusting or aligning any conventional component. Supplied with pocket storage case. KIT CONTAINS 1 EACH:
AS-5004-0000 adjustment screwdriver, AS-8275-0000 combination aligner, AS76-0000 steel tip duplex aligner, AS-8605-0000 small hex and screwdriver, AS06-0000 hex and tip tool, AS-8608-0000 mini potentiometer and trimmer tool,
AS-9300-0000 double ended hex tool, AS-9302-0000 3-in-1 hex core tool, AS9400-0000 square and hex tool.
Cat. No.
AS-5007-0000
Net Price
$12.70
Cat. No.
AS-8606-0000
Net Price
$2.55
3-IN-1 HEX CORE TOOL
Hex 5⁄64˝ (0.078˝ -2 mm) and 0.100˝ (2.5 mm)
Material: Conductive Nylon. Ends: small (0.078˝ ) hex followed by 0.100 hex;
0.100˝ hex (3⁄8˝ long), undercut shaft to reach bottom slugs in coils. Total Length:
53⁄8˝ (13.7 cm).
Cat. No.
AS-9302-0000
Net Price
$2.82
ADJUSTMENT SCREWDRIVER
Material: Conductive Nylon. Shaft: 1⁄4˝ (6.3mm) dia., 7˝ (17.7 cm) long. Ends:
1⁄32˝ thick screwdriver tip (Both ends). Total Length: 7˝ (17.7 cm).
Cat. No.
AS-5004-0000
Net Price
$2.57
STEEL TIPPED DUPLEX ALIGNER
Material: Conductive Nylon. Shaft: 7⁄32˝ (5.5 mm) dia., 61⁄8˝ (15.5 cm) long. Ends:
1
⁄8˝ (3.2 mm) wide steel tip; 1⁄8˝ (3.2 mm) wide steel tip, recessed 1⁄16˝ . Fits no. 6
slotted stud. Total Length: 61⁄8˝ (15.5 cm).
Cat. No.
AS-8276-0000
SMALL ENDS HEX & SCREWDRIVER
Net Price
$2.99
MINIATURE POTENTIOMETERTRIMMER ADJUSTMENT TOOL
Hex: 0.050˝ (1.25 mm).
3
Material: Conductive Nylon. Ends: hex (allen) steel 0.050˝ (1.25 mm), ⁄32˝ (2.4
mm) long; 3⁄32˝ (2.4 mm) wide steel screwdriver tip with 3⁄32˝ (2.4 mm) shank, 13⁄4˝
(4.4 cm) long shank. Total Length: 53⁄16˝ (13.2 cm).
Material: Conductive Nylon. Shaft: 1⁄4˝ (6.3 mm) dia. 415⁄16˝ (12.5 cm) long. Ends:
.085˝ (2.2 mm) wide steel tip; .085˝ (2.2 mm) wide steel tip, recessed .040˝ .
Total Length: 415⁄16˝ (12.5 cm).
Cat. No.
AS-8605-0000
Net Price
$3.61
Cat. No.
AS-8608-0000
1294
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT
BASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
Net Price
$3.24
GC Alignment Tools
SQUARE & HEX END TOOL
CODE
G-C TELEVISION CHANNEL TUNING TOOL
Hex: 0.100˝ (2.5 mm) Square: 1⁄16˝ (1.6 mm).
Material: Conductive Nylon. Ends: 0.100˝ (2.5 mm) hex, 3⁄8˝ (9.5 mm) long; 1⁄16˝
(0.062˝ -1.6 mm) square, 1⁄32˝ (0.1 cm) long. Total Length: 51⁄16˝ (12.8 cm).
Cat. No.
AS-9440-0000
MANU
169
Net Price
$1.71
Especially designed for television receivers, for making channel adjustments,
etc. Completely insulated, non-metallic tool with long 1⁄8˝ narrow blade. Overall
length of tool, including handle, approximately 71⁄4˝ . Made of bone fibre, 1⁄8˝
shaft diameter.
Cat. No.
00-8195-0000
DOUBLE ENDED EXTRA LONG SCREWDRIVER
Material: Fiberglass. Shaft: 5⁄32˝ (4 mm) dia., 16˝ (40.6cm) long. Ends: 1⁄32˝ thick
screwdriver tip (Both Ends). Total Length: 16˝ (40.6cm).
Cat. No.
00-9294-0000
Net Price
$3.97
Net Price
$3.22
G-C TELEVISION CORE ALIGNER
For Motorola, Stewart-Warner, Belmont and other sets using Stackpole or other
stud type cores that are not slotted. Made of plastic material 6˝ long with a milled
steel insert on one end and a thin screw driver blade on other end. 6˝ long, 7⁄32˝
shaft dia.
Cat. No.
00-8271-0000
G-C ALIGNMENT SCREWDRIVER
Low inductance metal tip screw driver made of plastic material—strong,
durable, completely insulated. Very popular all-around alignment tool.
Cat. No.
00-5000-0000
Description
7⁄32˝ Diam. × 6˝ Tool
Net Price
$2.97
Net Price
$2.49
G-C TELEVISION ZENITH
UNIVERSAL ALIGNER
Specially designed for certain Zenith and other sets. Made of natural Delrin
(white) and plastic handle, it has a thin Delrin screw driver on one end and a
recessed extra thin spring steel tip on the other end. 5˝ long, 1⁄8˝ shaft dia. 1⁄4˝
handle.
Cat. No.
00-8275-0000
G-C NO-METAL INSULATING
ADJUSTMENT SCREW DRIVER
Made of natural Delrin. Indispensable for aligning all-wave sets. Will give long
service. Ends can be re-ground. ICA type #1039.
Cat. No.
00-5004-0000
Description
7˝ long
Net Price
$2.07
G-C DUPLEX NO-METAL ALIGNMENT SCREW DRIVER
Made of natural Delrin—1⁄4˝ blade on one end and 1⁄8˝ blade on other. 6˝ long.
Very handy dual purpose alignment screw driver. Ends can be re-ground and
used again.
Cat. No.
00-5009-0000
Net Price
$2.92
Net Price
$2.55
G-C TELEVISION DUPLEX ALIGNER
An all-purpose TV aligner for trimmers and I.F. transformers. Made of plastic
material with extra thin spring steel tips, specially made for television. One end
has a projected tip, the other end has a recessed tip. ICA type #1015.
Cat. No.
00-8276-0000
Net Price
$2.42
G-C TELEVISION “SHORTY” DUPLEX ALIGNER
Specially made for trimmer and I.F. transformers where space does not permit
the use of a longer tool. Made of plastic material with extra thin hardened spring
steel tips. One end has a projected metal tip, the other end is recessed. 21⁄2˝
long, 7⁄32˝ shaft diameter.
Cat. No.
00-8277-0000
Net Price
$2.92
G-C ZENITH TELEVISION WRENCH AND ALIGNER
G-C K-TRAN TOOL
Specially designed for K-Tran and I.F. transformers. Made of natural plastic,
screw driver on both ends. 6˝ long, 5⁄32˝ Delrin tip, 1⁄8˝ metal tip.
Delrin plastic molded special tool made specially for Zenith TV sets. One end
has a plastic hex wrench and the other end a small screw driver tip. 57⁄16˝ long,
.100 dia. hex wrench, .109 screw driver diameter.
Cat. No.
00-5097-0000
Cat. No.
00-8282-0000
Net Price
$2.92
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT
BASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
Net Price
$2.19
1295
GC Alignment Tools
MANU
169
CODE
G-C CAPACITOR AND TUNER ADJUSTING TOOL
G-C “THIN END” TV ALIGNER
New adjuster for trimmer capacitors, sealed capacitors, and miniature L.C.
Tuners. Made of white Delrin with .050˝ hex head one end and screw driver tip
on the other end. Overall length of tuner is 51⁄8˝ .
A plastic, metal tipped aligner with turned down shank to fit very small coil openings. Originally designed for Westinghouse—now used on many sets. Length
53⁄4˝ .
Cat. No.
00-8605-0000
Cat. No.
00-9089-0000
Description
Adjusting Tool
Net Price
$2.92
G-C ZENITH-ADMIRAL NYLON HEX WRENCH
Net Price
$2.55
G-C .125 HEX DELRIN DOUBLE END IRON CORE TOOL
New nylon hex wrench alignment tool for Zenith, Admiral and other sets. Hex
wrench on both ends, one end under-cut so it will reach bottom slugs in iron
coils.
All Delrin hex tool made to fit cores with .125 hex opening. One end of tool
undercut so it can reach the bottom slug in coils without turning the top slug.
Supplied in 5˝ and 11˝ lengths.
Cat. No.
00-8606-0000
00-8606-000L
Cat. No.
00-9091-0000
Description
5˝ Wrench
11˝ Wrench
Net Price
$1.69
2.53
Net Price
$2.55
For adjusting coil slugs. This alignment tool is designed especially for use on
Magnavox sets and is also useful on other sets. Both ends are hex shaped. One
end is .075˝ with under cut shaft; the other end is .075˝ and .100˝ .
Cat. No.
00-9302-0000
FIBRE GLASS “ALIGNMENT STICKS”
Popular, double end, thin alignment sticks, inexpensive, practical and long lasting. Worn end can easily be sharpened with file or grinder.
Cat. No.
00-8728-0000
00-8729-0000
00-9293-0000
Description
121⁄16˝ Alignment stick
161⁄16˝ Alignment stick
12˝ Alignment stick
Net Price
$3.32
3.36
3.51
Description
3 In 1 Hex Tool
Description
Double End Delrin
Net Price
$3.38
Net Price
$2.30
G-C DOUBLE END ALIGNMENT TOOL
For adjusting coil slugs. A new alignment tool the serviceman will need for
adjusting coil slugs on Webcor and other sets. One end is .075˝ hex shaped
with an undercut shaft; the other end is a handy screwdriver tip.
Cat. No.
00-9304-0000
G-C DELRIN HEX TOOL
11˝ × .100 extra long to prevent hand capacity. .100˝ hex on both sides, one end
undercut for tuning bottom slugs. Handle diameter 5⁄32˝ .
Cat. No.
00-9295-0000
Net Price
$1.88
G-C 3 IN 1 HEX CORE ALIGNMENT TOOL
G-C ALIGNMENT TOOL
Handy, all-plastic alignment tool, easy to align and adjust TV sets, radio sets,
etc. Made of clear plastic, 5˝ long × 3⁄8˝ diameter. One end tip is recessed.
Cat. No.
00-8609-0000
Description
5˝ long hex tool
Description
Double End Tool
Net Price
$2.30
G-C DELRIN HEX TOOL
11˝ × .075 Hex, double end hex iron core tool. Makes it possible to turn both top
and bottom coil slugs with one tool. One end under-cut for turning bottom slug
separately. Has knurled 1⁄4˝ handle.
Cat. No.
00-9296-0000
Net Price
$2.99
G-C TV “X57 PLASTIC LONG SLIM” SCREWDRIVERS
A non-metallic screw driver made of polyester-fiberglass for utmost durability
and toughness. Worn ends can be re-ground and thin shaft diameter ( 1⁄8˝ )
reaches most TV and radio adjustments.
Cat. No.
00-8987-0000
00-8988-0000
1296
Lgth. Blade
7˝
12˝
Overall Lgth.
91⁄2˝
141⁄2˝
Net Price
$3.53
5.10
G-C DELRIN HEX TOOL
11˝ × .075 hex, double end hex iron core tool with 5⁄32˝ handle. One end undercut
for turning bottom slug separately. Will turn both top and bottom coil slugs.
Cat. No.
00-9297-0000
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT
BASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
Net Price
$3.45
GC Alignment Tools
G-C DOUBLE END HEX ALIGNMENT TOOL
Description
Double End Hex Tool
CODE
0000 TV channel tuning tool, 00-8196-0000 TV-FM tuning tool, 00-8271-0000
core aligner, 00-8273-0000 TV aligner, 00-8274-0000 long-reach aligner, 008275-0000 universal aligner, 00-8276-0000 duplex aligner, 00-8277-0000 shorty
duplex aligner, 00-8279-0000 core aligner, 00-8282-0000 Zenith alignment tool,
00-8606-0000 hex wrench–5˝ , 00-8608-0000 potentiometer adjustment tool.
For adjusting coil slugs. A general purpose alignment tool as well as a coil slug
adjuster. Both ends are .075˝ hex, with one end undercut. A tool of many uses.
Cat. No.
00-9300-0000
MANU
169
Cat. No.
00-8280-0000
Net Price
$37.48
Net Price
$2.15
TRANSISTOR I.F. CORE
ALIGNMENT TOOL (DELRIN)
For Arvin, Regency, Silvertone and others. 115⁄32˝ × .121˝ dia. shaft, 9⁄32˝ × .062˝
square head, .070˝ × .029˝ tip. 13⁄8˝ × .145˝ dia. shaft, 3⁄8˝ × .104˝ hex head,
1⁄16˝ × .075˝ × .042˝ tip.
Cat. No.
00-9440-0000
Net Price
$1.50
MINIATURE POTENTIOMETER
TRIMMER ADJUSTMENT TOOL
Material: Nylon. Shaft: 1⁄4˝ (6.3 mm) dia., 415⁄16˝ (12.5 cm) long. Ends: .085˝ (2.2
mm) wide steel tip; .085˝ (2.2 mm) wide steel tip, recessed .040˝ . Total Length:
415⁄16˝ (12.5 cm).
Cat. No.
00-8608-0000
Net Price
$2.63
G-C MASTER DELUXE TOOL KIT
Designed for the electronic technician who likes a complete assortment of alignment and adjustment tools. Includes tools used on mobile communication,
marine, and amateur equipment. KIT CONTAINS 1 EACH: 00-5000-0000 alignment screwdriver, 00-5004-0000 adjustment screwdriver, 00-5066-0000 neutralizing tool, 00-5080-0000 alignment wrench, 00-5097-0000 K-Tran tool, 00-81950000 TV channel tuning tool, 00-8196-0000 TV-FM tuning tool, 00-8271-0000
core aligner, 00-8273-0000 TV aligner, 00-8274-0000 long-reach aligner, 008275-0000 universal aligner, 00-8276-0000 duplex aligner, 00-8277-0000 shorty
duplex aligner, 00-8279-0000 core aligner, 00-8282-0000 Zenith alignment tool,
00-8289-0000 shorty aligner, 00-8290-0000 universal aligner, 00-8606-0000 hex
wrench–5˝ , 00-8609-0000 alignment tool, 00-8721-0000 2-in-1 alignment
tool–9˝ , 00-8722-0000 2-in-1 alignment tool–7˝ , 00-8727-0000 alignment tool,
00-8728-000A screwdriver–7˝ , 00-8867-0000 Tel-A-Turn tool, 00-9090-0000
adjustable shorty tool.
Cat. No.
00-8283-0000
Net Price
$58.37
G-C ALL-PURPOSE ALIGNMENT KIT
Selection of the most popular TV alignment tools and service aids, all in one
attractive, durable plastic case. Roll-up case stores easily in service kit. KIT
CONTAINS 1 EACH: 00-2520-0000 duplex aligner screwdriver, 00-5097-0000
K-Tran tool, 00-8271-0000 core aligner, 00-8276-0000 duplex aligner, 00-82890000 “shorty” aligner, 00-8606-0000 hex wrench–5˝ , 00-8729-0000 screwdriver–16˝ , 00-8988-0000 screwdriver, 00-9050-000L Zenith alignment tool, 009088-0000 brush/forked tip tool, 00-9091-0000 hex wrench core tool,
00-9297-0000 hex alignment tool.
Cat. No.
00-5040-0000
Description
12 Top Tool Kit
Net Price
$29.22
CB ALIGNMENT TOOL KIT
CB alignment tool kit: a must for every CB owner or repairman—eight of the
finest made, precision tools, serving a multitude of purposes. For tuning I.F.
transformers, RF coils, antennas and oscillator coils, plus countless other fine,
intricate adjustments. KIT CONTAINS 1 EACH: 00-5009-0000 duplex no-metal
screwdriver, 00-5097-0000 K-Tran tool, 00-8271-0000 core aligner, 00-82760000 duplex aligner, 00-8282-0000 Zenith aligner tool, 00-9091-0000 hex iron
core tool, 00-9440-0000 transistor tool, 00-9304-0000 double end tool.
Cat. No.
18-0530-0000
DELUXE ALIGNMENT TOOL KIT
Handy roll type case of durable leatherette that contains the most frequently
used alignment tools. Case has fold-over flap to prevent tools from becoming
lost. KIT CONTAINS 1 EACH: 00-2515-0000 K-Tran tool, 00-5066-0000 neutralizing tool, 00-5080-0000 alignment wrench. 00-5097-0000 K-Tran tool, 00-8195-
Net Price
$12.30
FLEXIBLE PICK-UP TOOL
Convenient, mechanical fingers pick up pieces and parts dropped into inaccessible places. Holds to start screws, nuts and bolts.
Cat. No.
12-0044-0000
Description
5˝ Miniature Tool
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT
BASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
Net Price
$5.24
1297
GC Alignment Tools
MANU
169
CODE
G-C COLOUR TV ALIGNMENT TOOL KIT
Consists of five alignment tools covering the majority of all alignment adjustments required in colour TV servicing. Provides eight hex ends which cover virtually all of the iron core transformer adjustments.
Cat. No.
00-8454-0000
Net Price
$8.33
STANDARD TV ALIGNMENT TOOL KIT
Made ot last and wear—a quality kit with essential alignment tools in a roll type
case. KIT CONTAINS 1 EACH: 00-5004-0000 adjustment screwdriver, 00-50970000 K-Tran tool, 00-8195-0000 TV channel tuning tool, 00-8196-0000 TV-FM
tuning tool, 00-8271-0000 core aligner, 00-8273-0000 TV aligner, 00-8274-0000
long aligning tool, 00-8275-0000 universal aligner, 00-8276-0000 duplex aligner.
Cat. No.
00-8455-0000
ALIGNMENT AND SPECIALTY KIT
Comprehensive selection of the most popular alignment tools and service aids.
Packaged in a handsome carrying case, designed to provide easy removal and
replacement of tools. Ideal for the technician and engineer who requires a wide
variety of tools for every purpose. KIT CONTAINS 1 EACH: 12-0760-0000 wire
stripper, 00-2520-0000 duplex aligner screwdriver, 00-5000-0000 alignment
screwdriver, 00-5004-0000 adjustment screwdriver, 00-5028-0000 wrench kit,
00-5090-0000 inspection mirror, 00-5091-0000 extension shaft, 00-5097-0000 KTran tool, 00-5101-0000 AC/DC test light, 00-7948-0000 tweezers, 00-8195-0000
TV channel tuning tool, 00-8271-0000 core aligner, 00-8275-0000 universal
aligner, 00-8276-0000 duplex aligner, 00-8277-0000 “shorty duplex aligner”, 008282-0000 Zenith alignment tool, 00-8605-0000 capacitor tool, 00-8606-0000
hex wrench 5˝ , 00-8606-000L hex wrench 11˝ , 00-8721-0000 2-in-1 tool 9˝ , 008722-0000 2-in-1 tool 7˝ , 00-8728-0000 alignment tool 12˝ , 00-8728-000A
screwdriver 7˝ , 00-8867-0000 Tel-A-Turn tool, 00-8868-0000 Tel-A-Turn tool, 008869-0000 Tel-A-Turn tool, 00-8868-0000 Tel-A-Turn tool, 00-8869-0000 Tel-ATurn tool, 00-8885-0000 oiler, 00-8987-0000 screwdriver 9-1/2˝ , 00-9076-0000
reamer/forked tip tool, 00-9077-0000 heat sink, 00-9091-0000 hex iron core tool
5-3/32˝ , 00-9091-000L 11˝ hex tool, 00-9093-0000 solder probe, 00-9094-0000
brush/scraper tool, 12-4614-0000 I.C. removal tool, 00-9293-0000 alignment tool
12˝ , 00-9295-0000 Delrin hex tool 11˝ , 00-9296-0000 Delrin hex tool 11˝ , 009300-0000 hex core tool, 00-9302-0000 hex wrench, 00-9304-0000 double end
tool, 00-9338-0000 burnishing tool, 00-9356-0000 fuse puller, 00-9440-0000
transistor tool.
Cat. No.
00-5050-0000
Net Price
$139.64
Net Price
$22.91
CERAMIC ADJUSTER SET
Six sizes include Flat Blade .9, 1.3, 1.8, 2.6mm and Phillips 1.7 and 3.0mm.
These adjusters are anti-static and nonmagnetic. Protective caps are included
to keep tips clean and contamination-free. Solder does not adhere to tip surface.
Resists acids (except Hydrofluoric) and solder. Comfortable, smooth handles
and tips are 100% rustproof. Packaged in form-fitted storage tray.
G-C INSPECTION MIRROR
00-5090-0000: 7-1/2˝ long mirror. Metal shaft and plastic handle. N.S.N. 512000-620-9233. 00-590-000P: 7-7/8˝ long all plastic insulated mirror. No danger of
shock or shorting. N.S.N. 5120-00-159-8180.
Cat. No.
12-5090
00-5090-000P
Cat. No.
12-0577-0000
Net Price
$42.54
Net Price
$6.27
6.24
CONTACT BURNISHING TOOLS
G-C HEAT SINK
A lightweight, first quality heat sink that allows a firm grip and provides protection to transistors and diodes when soldering. Solder will not stick to heat sink
which is aluminum.
Cat. No.
00-9077-0001
1298
Description
Aluminum Heat Sink
Net Price
$1.38
GC burnishing tools consist of stainless steel strips, micro-scored to an ultra-fine
file surface. They remove oxide and corrosion on relay and switch contact points
made of platinum, paladium, molydenum, gold tungsten, and silver. The standard tool is used on medium and large contact points whereas the fineline tool is
recommended for use on small and miniature components.
Cat. No.
00-9337-0000
00-9338-0000
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT
BASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
Description
Fineline (0.120˝ wide)
Standard width (1⁄4˝ )
Net Price
$1.86
1.86
GC Service Aids
MANU
169
CODE
“LUCKY 13” GENERAL PURPOSE ALIGNMENT TOOL KIT
For TV sets, AM/FM radios and CB equipment. KIT CONTAINS 1 EACH: 002512-0000 wire dressing tool, 00-2515-0000 K-Tran tool, 00-2520-0000 duplex
aligner, 00-8282-0000 Zenith alignment tool, 00-8289-0000 shorty aligner, 008279-0000 2-in-1 alignment tool 7˝ , 00-8867-0000 Tel-A-Turn tool, 00-8868-0000
Tel-A-Turn tool, 00-8869-0000 Tel-A-Turn tool, 00-8885-0000 oiler, 00-9051-0000
Zenith-RCA alignment tool, 00-9088-0000 brush/forker tip tool, 00-9191-0000
screwdriver 7˝ .
Cat. No.
00-0582-0000
PROFESSIONAL RATCHETING CRIMP TOOL
FEATURES: Heavy duty steel construction. Compound leverage for ease of
operation. Wide selection of interchangeable dies. Dies are marked with application. Crimp pressure adjustment. Ergonomic handle design for comfortable
extended use. Ratcheting design insures positive exacting crimps. Crimp
release for operator safety.
Cat. No.
12-9021-0000
Description
RG-59, RG-6 F-Type CATV Connectors
Net Price
$39.92
Net Price
$37.49
G-C HEAVY DUTY SPEED-O-MATIC WIRE STRIPPER
The latest model featuring the fully automatic delayed return action to prevent
crushing fine wires. Combines the best features of all of the Speedex wire strippers including narrow, easy grip handles and interchangeable blades.
WIRE STRIPPER KITS
Wire stripper with 3 different size blade sets packaged in a special plastic container. Includes blades for 14 to 30 gauge wire, 18 POSJ and 300 ohm wire.
Cat. No.
00-0766-000K
Description
Speed-O-Matic stripper Kit
Cat. No.
00-0766-0000
00-0766-000A
00-0766-000B
00-0766-000C
00-0766-000I
For Wire Size
12 to 20
14 to 30
10 to 18
RG-58, RG-59 & RG-62 Coax Cable
8 to 22
Net Price
$32.89
32.89
32.89
32.89
32.89
Net Price
$54.88
KWIK-STRIP COAX STRIPPER
IDC CRIMP TOOL
For crimping many styles of I.D.C. connectors onto flat cable (A.K.A. ribbon
cable). Works with card edge connectors, D-Sub, Centronics style and others. A
good tool for the custom cable maker.
Cat. No.
12-0463-0000
Net Price
$28.96
Ideal for use in the field. Cuts and strips RG-58/U or RG-59/U coaxial cables in
quick clean steps. Toggle latch keeps stripper closed. 31⁄4˝ × 21⁄8˝ × 11⁄4˝ . Weighs
only 2.6 oz.
Cat. No.
12-0164-0000
12-0165-0000
Net Price
$35.50
2.55
POCKET HEX KEY WRENCH SET
CRIMPING TOOL
FOR “F” CONNECTORS
Makes an excellent hex crimp in all “F-Type” and BNC connectors.
Cat. No.
12-0455-0000
Description
Stripper
Replacement Blade Set
Wrenches open like pocket knife blades. Six popular size wrenches: 0.50˝ to
3
⁄16˝ , fitted in steel case. Made of the finest nickel chrome alloy steel.
Net Price
$28.76
Cat. No.
00-9124-0000
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT
BASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
Net Price
$4.76
1299
Jonard Alignment & Telecom Tools
MANU
328
CODE
JONARD CONNECTOR-CRIMPING PLIERS
WITH SIDE CUTTERS
Designed to press UG, UR, and UY connectors. A special stop behind cut out
prevents damage to connectors. Utilized on combinations of plastic and pulp
insulated 19, 22, 24, and 26 gauge copper conductors as well as 20 gauge plastic insulated copper steel wire. The cushioned grip handles are yellow plastic
dipped. Length: 6˝ .
M-120
Cat. No.
JIC-891
M-125
Net Price
$19.20
M-130/SXP
M-145
JONARD SPRING HOOKS
Used for inserting, removing, and adjusting fine springs and other small parts in
tight areas. Indispensable for precision work in production and maintenance of
precision production, electronics, electromechanics, and even maintenance
jobs. All spring hooks are tapered to a fine point. Produced of the finest quality
high carbon steel with a nickel plated finish.
Cat. No.
M-120
M-125
M-130/SXP
M-145
Description
Pull hook with looped handle for maximum control.
Length: 6˝ .
Push hook with looped handle for maximum
control. Length: 6˝ .
Pull hook and lifter with a knurled grip. Length: 8˝ .
Captive spring hook. Spring loaded hook is
exposed by depressing plunger on top of tool.
Internal spring retracts hook automatically. This
hook is ideal for capturing small wires, springs, or
parts and holding them. Length: 7˝ .
Net Price
$4.05
4.05
4.49
13.59
JONARD LINEMAN’S B SIDE CUT PLIERS
Designed for heavy duty use in construction and maintenance work. These pliers are high leverage for cutting bolts, nails, and many gauges of wire including
high-strength wire. Cutting edges cut clean and remain sharp. The cushioned
grip, comfortable handles are red plastic dipped. Approx. length: 9˝ long.
Cat. No.
JIC-683
Net Price
$20.51
JONARD CLIP SETTER
Clip Setter used for setting and withdrawing 1.5mm and up E and C clips. One
end of this tool has a hook with leaf spring tension for removing the clip. Other
end of tool has leaf spring for holding clip in position to insert. Narrow shape
allows access to confined places. This tool is 6-3/4˝ long .275˝ wide and 1/16˝
thick.
Cat. No.
CS-1022
Net Price
$18.21
JONARD TELECOM LONG NOSE PLIERS
Long nose have side cutting blades, a crushing slot, one .030˝ stripping hole,
and a thin knurled nose to facilitate handling of the wire at the terminals. The
comfortable handles are yellow plastic dipped. Length: 7˝ .
JONARD ALIGNMENT TOOL KIT
This 5 piece pocket kit contains a selection of the most popular non-conductive
tools for aligning and adjusting components. Supplied in an easy to carry vial.
Cat. No.
TK-AT5
Description
Kit Contains: Trimpot, alignment 2 in 1 tool,
spudger, orange stick, and probe pick.
Cat. No.
JIC-21257
Net Price
$31.05
Net Price
$8.35
JONARD TELECOM LONG NOSE D PLIERS
Pliers are for general use looping, bending, and cutting. Grips small wires and
parts and reaches into tight spaces. Jaws are knurled, serrated, and have side
cutting blades. Cushion gripped yellow plastic handles. Length: 7˝ .
Cat. No.
JIC-842
1386
PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT
BASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
Net Price
$20.20