GUIDE &
catalog
FS2024 Dual Position Draft Shield
FS11300 Hybrid Isolator
Application:
Potent Powder Weighing
Vented Balance Safety Enclosure (VBSETM)
Application:
Potent Powder Weighing
Bag-In/Bag-Out Dual HEPA Filtration
Engineering Safety for the Containment of Your Application
www.flowsciences.com
about
f l o w s c ie n c e s
Engineering Safety for the Containment of Your Application
Flow Sciences, Inc. (FSI) designs and manufactures containment
solutions for research and development laboratories, pilot
plants, laboratory automation suites, manufacturing and
production sites. Our commitment to safety and performance
in the engineering, design, testing, and installation of
containment enclosures has proven performance throughout
pharmaceutical, biotech, chemical, forensic, academic,
government and other industrial facilities.
As an innovator in customer focused containment solutions, FSI
designs controlled airflow systems in a dynamic environment
process, scalable to the size or scope of the application. During
the 1990’s FSI pioneered the Vented Balance Safety Enclosure
(VBSE™) and introduced the first independent fan exhaust
system to isolate vibrations for balance accuracy. Swiftly
becoming the world leader in laboratory safety containment,
FSI continued its innovative design techniques introducing
waste chutes to the containment industry. Another industry
first was achieved by connecting enclosures with “passthroughs” allowing an entire process to be contained within a
protected environment.
Entering the new millennium, FSI continued to engineer the
advancement of safety containment beyond the laboratory.
FSI scaled the VBSE™ concepts and designs to bulk powder
and chemical processing containment in the pilot plant and
production environments. This has allowed reduced costs and
opened new application opportunities for its clients.
2
toll-free: 800.849.3429
FSI’s continued quest for high performance and customized
safety containment advanced into the laboratory
automation arena.
Incorporating Computational Fluid
Dynamics (CFD), FSI employed this technology to expand its
product portfolio to robotics and lab automation for either
personnel protection, product protection, or both. These
efforts produced a patented lateral flow enclosure.
The Flow Sciences team, the world leaders in containment
solutions, is dedicated to delivering superior engineering
quality and service at each level of controlled airflow
containment systems.
Flow Sciences, Inc.
2025 Mercantile Drive,
Leland, NC 28451
BECOME A MEMBER TODAY!
www.flowsciences.com
Become a registered member of our online community and
have unlimited access to:
•
•
•
•
•
•
Case Studies
Product Sheets
Product Catalog
Test Reports
Engineering Drawings
Product Manuals
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
What We Do
Computational Fluid Dynamics (CFD) is the study
of fluid dynamics using sophisticated computing
technology. Computational Fluid Dynamics uses or
solves the governing equations of fluid or gas flows
to predict the characteristics and the structure
of a flow field. The most important feature or
advantages of using CFD in the designing process
are the visualization opportunities. CFD affords
the user to see the results of enginnering design
more effectively than in the real world. The effects
of minute features in the designing process can
be seen and compared using CFD which cannot
be done in an otherwise efficient manner. Another
added advantage of using CFD is the repeatability
of the results.
Flow Sciences uses CFD in the design process
in order to concentrate and study the effects of
changes in airflow (large and small) in the enclosure
design. Any changes to an enclosure’s design affect
the airflow structure inside the enclosure and FSI’s
goal is to maintain stable airflow that improves
containment while also providing a low turbulent
atmosphere that allows sensitive equipment to
perform properly and minimizes any potential
product loss. With CFD we have the advantage of
evaluating the performance of the enclosure even
before it is built, and then verify those results in our
testing lab. This results in our clients receiving
enclosures that have proven performance.
For more information on CFD please visit our website:
http://www.flowsciences.com/
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
our global
reach
Flow Sciences, Inc. spans the globe providing containment solutions
wherever you may need them. We provide on site visits, offer sales support,
ship globally, and assist in navigating through all regulatory requirements.
4
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
6
www.flowsciences.com
containment
b y de s ig n
Enclosures for bench top applications, potent powder handling, personnel
protection, ergonomics and where balance stability is paramount.
FS11600 Bag-In/Bag-Out
FS2024 Dual Position Draft Shield
Application:
Potent Powder Weighing
Vented Balance Safety
Enclosure (VBSETM)
Application:
Potent Powder Weighing
Bag-In/Bag-Out Dual 99.99%
HEPA Filtration
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
G a l l er y
Standard & Custom Units Available
FS11600 Balance Enclosure
Bag-In/Bag-Out Dual HEPA
Filtration
Cut-Outs for Waste Chute and
Printer Stand
Phenolic Base for Easy Cleaning
Balance Stability Available to the
Seventh Decimal
Dimensions:
30” [76.2 cm] H
71.75” [182.2 cm] W
30” [76.2 cm] D
w
e
N FS11300 Hybrid Isolator
Bag-In/Bag-Out
Bag-In/Bag-Out Dual HEPA
Filtration
10” Acrylic Antechamber
Removable Glove Ports
10” Acrylic
Antechamber
8
toll-free: 800.849.3429
Dimensions:
58.91” [1496.4 mm] H
35.75” [908.1 mm] W
30.00” [762.0 mm] D
web: www.flowsciences.com
All Acrylic Construction
ensures excellent visibility
email: information@flowsciences.com
www.flowsciences.com
LED Light Kit
Nitrogen Purge
Nitrogen Purge Enclosure
Quad Hospital Grade NEMA
Rated Receptacle
LED Bar and Power Supply
8” Glove Ports
Hermetically Sealed Ports
Hermetically Sealed Ports
Dimensions:
23.00” [584.2 mm] H
32.75” [831.9 mm] W
22.62” [574.5 mm] D
Modified FS11400
Bag-In/Bag-Out Dual HEPA
Filtration
Modified Draft Shield to
Accommodate Microscope Cut Out
Cut Outs for Waste Chute and
Printer Stand
Phenolic Base for Easy Cleaning
Microscope
Cut Out
Dimensions:
27.38” [69.5 cm] H
35.75” [90.8 cm] W
30” [76.2 cm] D
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
TOP MOUNT TECHNOLOGY
10000 Series
The Flow Sciences FS10000 Series Top Mount Bag-out safety containment systems are designed to recirculate filtered
air back into the lab or attach to house exhaust with optional thimble accessory. The location of the filtration
system directly above the enclosure provides maximum containment with minimal space and energy
requirements. The low impeller provides quiet, smooth operation without transmitting vibration to the
work surface. An internal plenum allows for gentle, horizontal airflow. The turbulence-free airflow provides
a stable work environment without balance fluctuations.
High Speed Impeller
for Greater Efficiency
Exceptionally Quiet
Operation - Less than
50 dBA at 80 LFPM
Filter Placement
Protects Fan from
Particle Containment
4” Pleats for Extended
Filter Life
High Performance
Air Foils for Superior
Containment
Tool-less Removable
Baffles for Easy
Cleaning
10
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
10000 Series
BENCHTOP / SCALE UP
FS10201
FS10300
FS10200 with
Carbon
Filter
FS10435
Hinged Draft Shield
HEPA Filtration
Waste Chute
Phenolic Resin Base
Face Velocity Alarm
Model
FS10301
FS10200
FS10201
FS10300
FS10301
FS10400
FS10500
FS10600
Width
23.75”
60.3 cm
23.75”
60.3 cm
35.75”
90.8 cm
35.75”
90.8 cm
47.75”
121.3 cm
59.75”
151.8 cm
71.75”
182.2 cm
Depth
30”
76.2 cm
23”
58.4 cm
30”
76.2 cm
23”
58.4 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
Height
27.38”
69.5 cm
24”
61 cm
27.38”
69.5 cm
24”
61 cm
27.38”
69.5 cm
30”
76.2 cm
30”
76.2 cm
Note: Measurements are exclusive of fan/filter housing
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
Weight
215 lbs
97.5 kg
200 lbs
90.7 kg
245 lbs
111.1 kg
250 lbs
113.4 kg
275 lbs
124.7 kg
305 lbs
138.4 kg
335 lbs
152 kg
Bag-In/Bag-Out Safety
TOP MOUNT TECHNOLOGY
11000 Series
The Flow Sciences FS11000 Series Top Mount Bag-in/Bag-out safety containment systems are designed to
recirculate filtered air back into the lab or attach to house exhaust with optional thimble accessory. The Bag-in/Bagout system is designed for safe disposal and replacement of the HEPA filter by a certified technician. Convenient
front panel access has an Easy-Lock system that secures the filter so NO tools are required. A secondary HEPA filter
is located between the primary filter and the motorized impeller to prevent any contaminants that might migrate
downstream during Bag-in/Bag-out disposal.
High Speed Impeller
for Greater Efficiency
Exceptionally Quiet
Operation - Less than
50 dBA at 80 LFPM
Dual Filter Design
Protects Fan from
Particle Contamination
Primary Bag In/Bag
Out HEPA Filter and
Secondary HEPA Filter
4” Pleats for Extended
Filter Life
High Performance
Air Foils for Superior
Containment
Tool-less Removable
Baffles for Easy
Cleaning
12
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
Bag-In/Bag-Out Safety
11000 Series
BENCHTOP / SCALE UP
FS11300
Model
FS11300
FS11400
FS11500
FS11600
Width
35.75”
90.8 cm
47.75”
121.3 cm
59.75”
151.8 cm
71.75”
182.2 cm
Depth
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
Height
27.38”
69.5 cm
27.38”
69.5 cm
27.38”
69.5 cm
30”
76.2 cm
Weight
295 lbs
133.8 kg
315 lbs
142.9 kg
355 lbs
161.03 kg
385 lbs
174.6 kg
Note: Measurements are exclusive of fan/filter housing
FS11600
FS11400
Bag-In/Bag-Out
Dual HEPA Filtration
Balance Stability
Cut Outs for Waste
Chute and Printer
Stand
customized
SOLUTIONS
available!
Need a size that you don’t see here? Do you want a smaller face opening or a door accessible from the side?
Contact Flow Sciences, Inc. to learn about our customized containment options. Our team of design engineers
use sophisticated air modeling technology to create enclosures on a custom basis. A representative will guide
you through each phase of the custom order process:
CUSTOM QUOTATION REQUEST FORM ENGINEERING & DESIGN
PRODUCTION INSTALLATION & TRAINING
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
2000 Series
BENCHTOP TECHNOLOGY
High Speed Impeller
for Greater Efficiency
Exceptionally Quiet
Operation - Less than
62 dBA at 80 LFPM
The Flow Sciences FS2000 Series of Vented Balance
TM
Safety Enclosures (VBSE ) is designed specifically
for applications where balance stability and accuracy
are paramount concerns while still protecting
personnel from potent powders and toxic chemicals.
Available in 2’ to 8’ widths, 23” to 30” depths, and
19.5“ and 30” heights.
High Performance
Air Foils for Superior
Containment
Square Discharge
on Blower Reduces
Pressure Drop
Standard 8” Cutouts
Allow for Optional
Waste Port or Pass-Thru
FS2010 - Enclosure showing
external fan and filter housing.
The 2000 Series Features:
14
• Gentle, non-turbulent airflow to prevent balance
fluctuation and loss of materials.
• Side ports with blank plates for easy installation of
optional Waste Disposal Chute or Pass-Thru.
• Dished resin base to provide easy cleanup and
containment of spills.
• Simple alarm to alert operator of face velocities below
a specified range.
• Smooth airflow across the worksurface clearing
contaminants within the enclosure.
• Mounted airfoils around the face opening to direct
airflow across the work surface to the back of the
enclosure.
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
2000 Series
BENCHTOP / SCALE UP
FS2010
Model
FS2010
FS2015
FS2020
FS2030
FS2040
FS2015
Width
23.75”
60.3 cm
35.75”
90.8 cm
47.75”
121.3 cm
59.75”
151.8 cm
71.75”
182.2 cm
Depth
23”
58.4 cm
23”
58.4 cm
23”
58.4 cm
23”
58.4 cm
23”
58.4 cm
Height
19.5”
49.5 cm
19.5”
49.5 cm
19.5”
49.5 cm
19.5”
49.5 cm
19.5”
49.5 cm
Weight
84 lbs
38.1 kg
102 lbs
46.27 kg
150 lbs
68.04 kg
186 lbs
84.37 kg
200 lbs
90.72 kg
Note: Dimensions are exclusive of external plenum.
System Options
D
Enclosure System with Vent Kit
FD
Enclosure System with Fan/HEPA Filtration
WD
Enclosure System with Vent Kit & Waste
Chute (FS2070)
WFD
BFD
FS2020
Enclosure System with HEPA Filtration &
Waste Chute
Enclosure System with Bag-in/Bag-out
HEPA Filtration
FS2030
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
2000 Series
BENCHTOP TECHNOLOGY
FS2240
Model
FS2230
FS2240
FS2250
FS2260
FS2280
FS2280
Width
35.75”
90.8 cm
47.75”
121.3 cm
59.75”
151.8 cm
71.75”
182.2 cm
95.75”
243.2 cm
Depth
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
Height
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
Weight
166 lbs
75.3 kg
221 lbs
100.2 kg
276 lbs
125.2 kg
332 lbs
150.6 kg
443 lbs
200.9 kg
Note: Dimensions are exclusive of external plenum.
System Options
FS2350
D
Enclosure System with Vent Kit
FD
Enclosure System with Fan/HEPA Filtration
WD
Enclosure System with Vent Kit & Waste
Chute (FS2070)
Enclosure System with HEPA Filtration &
Waste Chute
Enclosure System with Bag-in/Bag-out
HEPA Filtration
WFD
BFD
Model
FS2300
FS2350
FS2400
FS2400
FS2500
FS2600
FS2800
Width
23.75”
60.3 cm
35.75”
90.8 cm
47.75”
121.3 cm
59.75”
151.8 cm
71.75”
182.2 cm
95.75”
243.2 cm
Depth
23”
58.4 cm
23”
58.4 cm
23”
58.4 cm
23”
58.4 cm
23”
58.4 cm
23”
58.4 cm
Height
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
30”
76.2 cm
Weight
110 lbs
49.9 kg
130 lbs
59.0 kg
170 lbs
77.1 kg
220 lbs
99.8 kg
264 lbs
119.75 kg
352 lbs
159.7 kg
Note: Dimensions are exclusive of external plenum.
16
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
USE THIS SPACE TO SKETCH A LAYOUT
OF YOUR FLOORPLAN
SCAN, FAX, OR MAIL YOUR SKETCH TO
A SALES REPRESENTATIVE.
fax: 1-910-763-1220
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
Customized Solutions
For Your Application
New FS10445 Profill
Split Draft Shield to Accomodate
Specialty Equipment
No Compromise in Superior
Containment of Potent API’s
99.99% HEPA Filtration
Phenolic Base for Easy Clean-Up
Quick Release Draft Shield for
Equipment Transfer and Loading
Split Draft Shield to
Accommodate Profill
Suggested Accessories
Dimensions:
50.23” [1275.7 mm] H
47.75” [1212.9 mm] W
30.00” [762.0 mm] D
Adjustable Height for
Ergonomic Interaction
Locking Caster Wheels
Stainless Steel
Construction
Electronic Lift Controls
Available
Ergonomic Design
Improves User Comfort
18
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
NewFS 2024
2 Position Draft Shield
Ergonomic Dual Position Draft
Shield for Compounding, Capsule
Filling and More
Down Position
Cut-Outs for Waste Chute and
Printer Stand
Phenolic Base for Easy Cleaning
Balance Stability Available to the
Seventh Decimal
Up Position
Dimensions:
23.63” [600.1 mm] H
47.75” [1212.9 mm] W
30.50” [774.7 mm] D
FS10425
99.99% HEPA Filtration
Balance Stability Available to the
Seventh Decimal
Quick Release Draft Shield for
Equipment Transfer and Loading
Accommodates Printer Stand and
Waste Chute
Dimensions:
58.91” [1496.4 mm] H
35.75” [908.1 mm] W
30.00” [762.0 mm] D
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
features
& benefits
External Venting Options
to Fit Your Space
Upward Exhaust
Three Venting Options
1. Vent directly to house exhaust.
2. Vent to Fan Filter System with the Bag-In/
Bag-Out or Bag-Out HEPA filtration for
recirculation into the room.
3. Vent to Fan Filter System with Bag-In/
Bag-Out or Bag-Out HEPA filtration and
connect to house exhaust.
Rear Plenums can be inverted to exhaust
downward when necessary.
www.flowsciences.com
Inverted Plenum
FS 2019 - Enclosure
showing inverted
plenum for laboratories
needing downward
pointing ductwork.
Downward Exhaust
20
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
FS 2024 w/ Vent Kit
Vent to External Bag-Out,
or Bag-In/ Bag-out 99.99%
HEPA Filter
Dimensions:
24.00” [645mm] H
47.75” [1213mm] W
30.50” [774mm] D
External Fan/Filter
FS 2024 - Enclosure showing exhaust to external
bag-out 99.99% HEPA filter
Suggested Accessories
VBSETM for Containment of Potent API’s
Balance Stability
Printer Stand and Waste Chute Shown
Vented to External Bag-Out, or Bag-In/
Bag-Out 99.99% HEPA Filter
Quick Release, 2 Position Draft Shield
Printer Stand and
Waste Chute
Bag-In/Bag-Out
HEPA Filtration
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
Top Mount
Venting Options
to Fit Your Space
features
& benefits
Exhaust Option 1
Exhaust Option 2
Direct to House
Exhaust
Exhaust Option 3
Direct to House
Exhaust Through HEPA
Filtration
Exhaust Option 4
HEPA Fan/Filter
Recirculation Back
Into the Laboratory
Workspace [option:
thimble to house]
Bag-In/Bag-Out, Dual
HEPA Fan/Filter with
Recirculation Back
Into the Laboratory
Workspace [option:
thimble to house]
Exhaust Baffle
Prevents Shearing
Airflow
Thimble to
House Exhaust
22
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
Exhaust Option 5
Bag-In/Bag-Out, Dual HEPA Fan/Filter, Mesh
Filter Housing, with Recirculation Back Into the
Laboratory Workspace
Exhaust Option 6
HEPA Fan/Filter, Mesh Filter Housing, with
Recirculation Back Into the Laboratory Workspace
Exhaust Option 7
Positive Pressure for Product Protection
CARBON FILTRATION SYSTEMS
Also Available
To determine the best venting options
for your application, contact a Flow
Sciences representative. We will
customize a solution to fit your needs.
FS 10200
Dimensions:
49.73” [1263.0 mm] H
24.00” [609 mm] W
30.00” [762.0 mm] D
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
We Carry All Related
ACCESSORIES
HEPA Filters
Replacement filters in all sizes
HEPA 99.99% filtration
4” HEPA media means better particle dispersion and
a longer filter life
Printer Stand and Waste Chute
Printer stand also doubles as alarm mount
Waste bags ensure maximum API containment
Quick and easy waste bag change out
External HEPA Bag-In/Bag-Out Filtration
HEPA 99.99% filtration
Bag-In/Bag-Out
Vents externally, easy filter changing
LED Light Kits
Available in 3’ and 4’ lengths and custom lengths
Adjustable angle lighting provides maximum work
space visibility
24
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
Iris Ports
Easily route all cord and cables through one port
Ports placed at rear to prevent tripping hazards
Custom sizes available
Internal Power Outlets
Internal and external outlets available
Hermetically sealed available to protect your working
environment
Quick and easy equipment power up and down, and fast
access in case of emergency
Stainless Steel Mesh Filter Housing
Recirculates HEPA 99.99% filtered air
Compatible with our carbon filtration systems
Available on all standard size fans
Factory Acceptance Testing (F.A.T.)
Validate the performance of your enclosure
Know containment levels to the nanogram/m3 over
an 8 hour time weighted average
Third party validation options
On site surrogate powder testing
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
Phenolic Shelving
Tables and Carts
Manual and automated height adjustment available
Stainless steel construction
Locking caster wheels or leveling pads
Phenolic resin shelving for easy clean up of spills
Customized to your enclosure and application
Automated Lift
Up to 1,800 lbs. lifting capacity
Adjustable Table Feet
Adjust Table Legs Independently
Available on All Tables
Affords Ergonomic Interaction
Transfer Port/Glove Ports
Locking Caster Wheels
Custom length and diameter acrylic
pass throughs
Glove ports for added personnel protection
Removable draft shield for easy change
out of replacement gloves and ergonomic
interaction
10” Acrylic
Antechamber
Removable Draft Shield
With Glove Ports
26
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
Berkshire
Cleaning Products
FS2073 Berkshire Cleaning Kit
Cleaning Products Included in Kit
Product #
1. H-1182
2.
Product #
H-1182
1 ea - Berkshire Isolator
Cleaning Tool
3.
25 ea - Dry Isolator Cleaning
Tool Covers
1 pk (300 ea) - NonWoven
Dry Wipes (9” x 9”)
4.
FS2073
1.
2.
3.
4.
5.
6.
7.
8.
1 pk (75 ea) - 70/30 IPA
Presaturated Wipes
Also Included in Kit
5.
Cleaning Protocol for 2000 Benchtop Enclosures
Prior to cleaning:
- Prepare Cleaning Solutions
- Place wiper flat on surface inside
- Select Dry or Presaturated Wipes
enclosure and quarter fold.
- Gown according to written protocols - Saturate wipe with cleaning solution
- Work from cleanest areas to the dirtiest
6.
Start cleaning with one single stroke
across front airfoil on door.
Re-orient wiper to clean side for
cleaning with one single stroke
across back airfoil on door.
Wiping front to back on each stroke,
clean the top of the enclosure.
Wipe side walls front to back and top
to bottom.
Wipe down base, cleaning from front
to back, overlapping each stroke.
Wipe the underside of the front air foil
with one single stroke.
Put all contaminated materials
through waste port into bag.
ea
ea
ea
ea
ea
ea
ea
ea
-
Cleaning
*Àœ«iÀÊvœ`ˆ˜}ʜvÊ̅iÊ܈«iÀÊ܈Ê“>݈“ˆâiÊivvˆVˆi˜VÞÊ>˜`ÊṎˆâiÊiˆ}…ÌÊVi>˜Ê܈«ˆ˜}ÊÃÌÀœŽið
Clean interior of front door. Start at
highest point and work towards
bottom, overlapping each stroke.
7.
8.
­£®Ê*>ViÊ̅iÊ܈«iÀÊv>Ìʜ˜Ê̅iÊÃÕÀv>Vi°Ê/>ŽiÊ̅iÊÌܜÊv>À̅iÃÌÊi˜`ÃÊ
vÀœ“ÊޜÕÊ>˜`ÊLÀˆ˜}Ê̅i“Ê̜Ü>À`ÃÊޜÕ]Êvœ`ˆ˜}Ê̅iÊ܈«iÀʈ˜Ê…>v°
­Ó®Êœ`Ê̅iÊ܈«iÀʈ˜Ê…>vÊ>}>ˆ˜]ÊVÀi>̈˜}ÊvœÕÀÊVi>˜ˆ˜}Êv>ViÃ\ÊÌܜÊ
œÕÌÈ`iÊ>˜`ÊÌܜʈ˜Ãˆ`i°
­Î®Ê7œÀŽÊvÀœ“Ê̅iÊVi>˜iÃÌÊ>Ài>ÃÊ̜Ê̅iÊ`ˆÀ̈iÃÌÊ>Ài>Ãʈ˜Êœ˜}Ê
ÃÌÀ>ˆ}…ÌÊÃÌÀœŽiðÊ>V…Êv>ViʜvÊ̅iÊ܈«iÀÊ܈ÊLiÊÕÃi`ÊvœÀʜ˜iÊ
ÃÌÀœŽi°Ê/ÕÀ˜Ê܈«iÀʜÛiÀÊ>˜`ʓ>ŽiÊ>ÊÃiVœ˜`ÊÃÌÀœŽi°
­{®Ê,ivœ`Ê̅iÊ܈«iÀÊ>ÃÊŜܘʈ˜ÊÃÌi«Ê­Ó®Ê̜Êi˜VœÃiÊ̅iÊÌܜÊVœ˜‡
Ì>“ˆ˜>Ìi`Êv>ViÃÊ>˜`ÊiÝ«œÃiÊ̅iÊÌܜÊVi>˜Êv>ViðÊ,i«i>ÌÊÃÌi«Ê­Î®Ê
ÕȘ}Ê̅iÊÌܜÊVi>˜Êv>Við
Wipe the rear plenum from top to
bottom.
Last cleaning step, re-wipe side and
bottom air foils.
*Registered USERS can view technical downloads
and PDFs online
The Flow Sciences’ Cleaning Protocol can also be accomplished with the Berkshire Easy-Clean tool. The tool is to allow the technician to minimize arm exposure while cleaning top of the enclosure, sidewalls, rear plenum, and bottom base utilizing one Easy-Clean cover per surface.
Visit www.Berkshire.com for more information.
Cleaning materials used
above supplied by:
>Ê£°nää°Ó{Ó°ÇäääÊvœÀÊvÀiiÊÃ>“«iÃÊ>˜`
̜Ê>ÀÀ>˜}iÊvœÀʜ˜‡Ãˆ}…ÌÊÌiV…˜ˆV>ÊVœ˜ÃՏÌ>̈œ˜°
­x®Ê7ˆ«iÀʓ>ÞÊLiÊVœ“«iÌiÞÊ՘vœ`i`]ÊÀiÛiÀÃi`]ÊÊ>˜`ÊÀivœ`i`Ê
Li}ˆ˜˜ˆ˜}Ê>}>ˆ˜Ê>ÌÊÃÌi«Ê­£®Ê̜Êi˜VœÃiÊ̅iÊvœÕÀÊVœ˜Ì>“ˆ˜>Ìi`Ê
v>ViÃÊ>˜`ÊiÝ«œÃiÊ̅iÊvœÕÀÊÀi“>ˆ˜ˆ˜}ÊVi>˜Êv>ViðÊ
��nnnnnnnnnnnnnn nnnnnnnnnnnnnn nnnnnnnnnnnnnnnnn nnnnnnnnnnnnnn nnnnnnnnnnnnnnnn nnnnnnnn
n
� n n n n n n n n n n n nn nn n n n n n n n
n
n
nnn
nn nnnnnnnnnnnnnnnnnnnnnnn
n
n
nnn
n
n n n n n n n n n n n n n n n n n n n n n n n n n n n nn n n n n n n n
n
n
nnn
nnnnnnnnnnnnnnnnnn
FSI PART/LIT# Berkshire Fold and Wipe
Call Flow Sciences’ Customer Service (800-849-3429) for pricing on a Berkshire Cleaning Kit.
Part/Lit# 2000 Series Cleaning Poster
17-Page Top Mount Cleaning Guide
Kit
Berkshire Isolator Cleaning Tool
Dry Isolator Cleaning Tool Covers
Nonwoven Dry Wipes
70/30 IPA Presaturated Wipes
Top Mount Cleaning Guide
2000 Series Cleaning Poster
Berkshire Folding Technique Poster
CD with Cleaning Video
��n�n�n���n�n�nn����n�n������n
www.flowsciences.com
To Request a PDF or Power Point
Presentation on the Cleaning
Protocol for Top Mount
Enclosures, visit:
www.flowsciences.com and
Register as a *USER or
Call 1-800-849-3429.
Remove contaminated sleeve
protectors and gloves while still
inside containment unit.
1
25
300
75
1
1
1
1
11” x 17” 2000 Series
Cleaning Poster
2000 Series
Cleaning Video
11” x 17” Berkshire
Folding Technique Poster
Contact Customer Service:
To Request a Copy of the Cleaning Protocol as a Video, PowerPoint, PDF, or Poster...
VISIT US ON THE WEB: www.flowsciences.com
800.849.3429
information@flowsciences.com
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
Lit# FSCleaning Kit Mar2010A
28
www.flowsciences.com
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
ACTIVES AND EXCIPIENTS
Bulk Powder Chemical Transfer
•
Contained transfer of bulk powders
•
Standard sizes available
•
20” standard diameter cutout in base
•
Available with Bag In / Bag Out HEPA filtration and
secondary safety HEPA
•
Completely customizable for your application
•
Add a recess for smaller diameter containers
•
Covers can be added to any cutout for an additional
worksurface when not in use
•
Alternate materials of construction available
FS11650 6’ Bulk Powder Transfer
Hybrid Technology
30
•
Rigid containment system can be connected to flexible
containment for enhanced ergonomics and workflow
•
Containment levels less than 0.1µg/m3
•
Factory Acceptance Testing (FAT) available
•
Also available with glove ports
•
Inhibits direct contact with product
FS10300 with Glove Ports
Stainless Steel and
Tempered Glass
options available
Chemical Transfer StationTM
FS5000-139 V-Blender containment system
BLENDING
V-Blender Containment System (Shown on right)
System with cart provides access with V-blender on board
Flexible equipment cart wheels into enclosure and locks
with seal in place
•
•
Easily cleaned
Carts interchangeable
Enclosure construction options available:
•
•
•
•
Acrylic
Polypropylene
Aluminum extrusion
Stainless steel
Viewing window options available:
•
•
Acrylic
Tempered Glass
Scalable design options allow for unique containment
solutions.
•
No wasted space
Service doors and ports locatable for user-friendly
access.
•
•
100% access to all levers and panels
Cord and data cable “pass-throughs”
Table options:
•
•
Framed 316 stainless steel
1800 lbs. ergonomic lift
FS5000-139 allows for multiple pieces of equipment
to share the same containment enclosure
CQ2195 Polypropylene containment for
GlobePharma MaxiBlendTM Lab Blender
MILLING &
GRANULATION
•
Units work independently of
each other or can be linked
together by “pass-through” for
streamlined process
•
Factory Acceptance Test (FAT)
confirms containment levels to
0.1 µg/m3
FS11300-06 and FS11400-08 linked together
FS11300-06 Containment for
L1A FitzMillTM Comminutor
•
32
•
Adjustable sliding sash feature allows
equipment access for loading, unloading, and operation adjustment
Standard rear access doors and panels
FS11400-08 Containment for
AlexanderwerksTM Roller Compactor
•
Work surfaces can be tiered to elevate
equipment
•
Service and maintenance friendly
DRYING AND COMPRESSION
Flexible materials allow enclosures to be linked
directly to equipment
Service and access needs are always addressed:
•
Sliding doors
•
Hinged doors
•
Removable panels
•
Mobility
•
Portability
Filtering options available:
•
Direct to house exhaust
•
Filter and recirculate back into room
•
Filter and connect to house exhaust
FS11300SS-01 Stainless steel and Tempered
Glass containment features pass-through for
connection to drying oven
FS5000-138 Containment
for Lyostar IITM Tray Dryer
FS5000-151 Containment for
Manesty XPress® 300 Tablet Press
TABLET COATING AND POLISHING
FS5000-152 Containment for
Niro SupercellTM Tablet Coater
FS5000-149 Containment for
Vangaurd VSZ-500 Tablet Deduster
•
No additional lighting required
Case Study: Tableting Suite
Bulk powders are dispensed in aliquots and
transferred to a high shear
granulator, fluid bed dryer, and blender. The
process concludes in the final
enclosure containing the tablet press.
The two larger enclosures utilize
interchangeable carts to allow for other
pieces of equipment to be accommodated
as desired. Units include dual Bag In/Bag
Out HEPA filtration for maximum
containment.
Surrogate sampling showed containment
results of 1 to 5 mg/m3.
34
•
All-clear construction allows for
360o viewing
•
Entire side panels are removable
Case Study: Clinical Pilot Plant
Flow Sciences’ team of design engineers
developed a set of custom designed modular
enclosures to contain at the OEB 2 level. The entire
unit was comprised of four distinct enclosures
connected by pass-thrus on both the left and right
sides with either a sliding door or hinged door for
segregation. The pass-thrus were aligned so that the
enclosures can trade positions as required.
Each enclosure sits on interchangeable carts,
allowing enclosures to be used for other pieces of
equipment as desired by the customer. Each
enclosure included in the modular unit features dual
Bag In / Bag Out HEPA filtration for maximum containment and was built with removable panels giving the
user the ability to easily change access points.
Front access openings and/or doors were designed
for access either before, during, or after the process.
Some of the enclosures featured side access doors as
well. The sides and back of the enclosures
featured removable panels for ease of cleaning and
periodic decontamination.
A de-gowning room provides a down flow of HEPA
filtered air so that particles from the
personnel’s protective equipment cannot migrate
into the breathing zone of the operator. This room
was located positively to the process room and
negatively to the hallway.
36
38
40
42
44
www.flowsciences.com
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
How to Place an Order
1. Determine your specific application and containment needs to be addressed
2. Consider your workspace dimensions (refer to page 17 to sketch work area)
3. Determine your venting preferences (to house exhaust, to an external fan/filter, or recirculation back into the room)
4. Contact a representative: 1-800-849-3429 or email information@flowsciences.com
D = enclosure, alarm and vent kit
FD = enclosure, alarm, vent kit, fan housing, and filter
BFD = enclosure, alarm, vent kit, BIBO fan housing, and BIBO filter
VACE = vented anethestic containment enclosure
BP = bulk powder
46
FS NUMBER
W
D
H
DESCRIPTION
2000
2009D
2’
2’
23”
23”
19.75”
19.75”
2009FD
2009BFD
2’
2’
23”
23”
19.75”
19.75”
2010D
2’
23”
19.75”
2010FD
2’
23”
19.75”
2010BFD
2014D
3’
3’
23”
23”
19.75”
19.75”
2014FD
3’
23”
19.75”
2014BFD
2015D
3’
3’
23”
23”
19.75”
19.75”
2015FD
3’
23”
19.75”
2015BFD
4’
23”
19.75”
2’ W VBSE with inverted plenum, alarm and vent kit
2’ W VBSE with inverted plenum, alarm, vent kit, fan
housing and BagOut HEPA filter
2’ W VBSE with inverted plenum, alarm, vent kit, BIBO
fan housing and BIBO filter
2’ W VBSE, alarm and vent kit
2’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
2’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
3’ W VBSE with inverted plenum, alarm and vent kit
3’ W VBSE with inverted plenum, alarm, vent kit, fan
housing and BagOut HEPA filter
3’ W VBSE with inverted plenum, alarm, vent kit, BIBO
fan housing and BIBO filter
3’ W VBSE, alarm and vent kit
3’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
3’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
4’ W VBSE with inverted plenum, alarm and vent kit
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
FS NUMBER
W
D
H
DESCRIPTION
2019D
2019FD
4’
4’
23”
23”
19.75”
19.75”
2019BFD
4’
23”
19.75”
2020D
2020FD
4’
4’
23”
23”
19.75”
19.75”
2020BFD
4’
23”
19.75”
2024D
4’
23”
23.63”
2024FD
4’
23”
23.63”
2024BFD
4’
23”
23.63”
2025D
4’
23”
23.63”
2025FD
4’
23”
23.63”
2025BFD
4’
23”
23.63”
2030D
2030FD
5’
5’
23”
23”
19.75”
19.75”
2030BFD
5’
23”
19.75”
2230D
2230FD
3’
3’
30”
30”
30”
30”
2230BFD
3’
30”
30”
2240D
2240FD
4’
4’
30”
30”
30”
30”
2240BFD
4’
30”
30”
4’ W VBSE with inverted plenum, alarm and vent kit
4’ W VBSE with inverted plenum, alarm, vent kit, fan
housing and BagOut HEPA filter
4’ W VBSE with inverted plenum, alarm, vent kit, BIBO
fan housing and BIBO filter
4’ W VBSE, alarm and vent kit
4’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
4’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
4’ Compounders Workstation,inverted plenum, alarm,
draft shield and vent kit
4’ Compounders Workstation,inverted plenum, alarm,
draft shield, vent kit, fan housing and BagOut HEPA
filter
4’ Compounders Workstation,inverted plenum, alarm,
draft shield, vent kit, BIBO fan housing and BIBO filter
4’ Compounders Workstation, alarm, draft shield and
vent kit
4’ Compounders Workstation, alarm, draft shield, vent
kit, fan housing and BagOut HEPA filter
4’ Compounders Workstation, alarm, draft shield, vent
kit, BIBO fan housing and BIBO filter
5’ W VBSE, alarm and vent kit
5’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
5’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
3’ W VBSE, alarm and vent kit
3’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
3’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
4’ W VBSE, alarm and vent kit
4’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
4’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
48
FS NUMBER
W
D
H
DESCRIPTION
2250D
2250FD
5’
5’
30”
30”
30”
30”
2250BFD
5’
30”
30”
2260D
2260FD
6’
6’
30”
30”
30”
30”
2260BFD
6’
30”
30”
2300D
2300FD
2’
2’
30”
30”
30”
30”
2300BFD
2’
30”
30”
2350D
2350FD
2350BFD
3’
3’
30”
30”
30”
30”
3’
30”
30”
2400D
2400FD
4’
4’
30”
30”
30”
30”
2400BFD
4’
30”
30”
2500D
2500FD
5’
5’
30”
30”
30”
30”
2500BFD
5’
30”
30”
2600D
2600FD
6’
6’
30”
30”
30”
30”
2600BFD
6’
30”
30”
5’ W VBSE, alarm and vent kit
5’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
5’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
6’ W VBSE, alarm vent kit
6’ W VBSE, alarm, vent kit fan housing and BagOut
HEPA filter
6’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
2’ W VBSE, alarm and vent kit
2’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
2’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
3’ W VBSE, alarm and vent kit
3’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
3’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
4’ W VBSE, alarm and vent kit
4’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
4’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
5’ W VBSE, alarm and vent kit
5’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
5’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
6’ W VBSE, alarm and vent kit
6’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
6’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
FS NUMBER
W
D
H
DESCRIPTION
2930D
2930FD
3’
3’
30”
30”
19.75”
19.75”
2930BFD
3’
30”
19.75”
3’ W VBSE, alarm and vent kit
3’ W VBSE, alarm, vent kit, fan housing and BagOut
HEPA filter
3’ W VBSE, alarm, vent kit, BIBO fan housing and BIBO
filter
3000D
3000MD
2’
2’
18.5”
18.5”
20”
20”
3000MFD
2’
18.5”
20”
3000MBFD
2’
18.5”
20”
3060D
3060MD
3’
3’
18.5”
18.5”
20”
20”
3060MFD
3’
18.5”
20”
3060MBFD
3’
18.5”
20”
3100D
3100MD
4’
4’
18.5”
18.5”
20”
20”
3100MFD
4’
18.5”
20”
3100MBFD
4’
18.5”
20”
3915D
3915FD
3’
3’
23”
23”
20”
20”
3920D
3920FD
4’
4’
23”
23”
20”
20”
2’ W workstation, alarm and vent kit
2’ W workstation, alarm, microscope cut out in door
and vent kit
2’ W workstation, alarm, microscope cut out in door,
vent kit, fan housing and BagOut HEPA filter
2’ W workstation, alarm, microscope cut out in door,
vent kit, BIBO fan housing and BIBO filter
3’ W workstation, alarm and vent kit
3’ W workstation, alarm, microscope cut out in door,
and vent kit
3’ W workstation, alarm, microscope cut out in door,
fan housing and BagOut HEPA filter
3’ W workstation, alarm, microscope cut out in door,
BIBO fan housing and BIBO filter
4’ W workstation, alarm and vent kit
4’ W workstation, alarm, microscope cut out in door,
and vent kit
4’ W workstation, alarm, microscope cut out in door,
vent kit, fan housing and BIBO filter
4’ W workstation, alarm, microscope cut out in door,
vent kit, BIBO fan housing and BIBO filter
3’ W VACE, alarm and vent kit
3’ W VACE, alarm, vent kit, fan housing and BagOut
HEPA filter
4’ W VACE, alarm and vent kit
4’ W VACE, alarm, vent kit, fan housing and Bagout
HEPA filter
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
FS NUMBER
W
D
H
IQOQ FOR 10000 SERIES ENCLOSURE
11000 SERIES IQOQ PROTOCOL
10000 IQOQ
11000 IQOQ
50
DESCRIPTION
10450
10550
10650
11450
47”
59.75”
71.75”
47.75”
30”
30”
30”
30”
30”
30”
30”
30”
11550
59.75” 30”
30”
11650
71.75” 30”
30”
10201
10200
10301
10300
10401
10400
10425
24”
24”
36”
36”
48”
48”
48”
24”
30”
24”
30”
23”
30”
24”
10435
48”
30”
10501
10500
10601
10600
10800
11301
60”
60”
72”
72”
96”
36”
23”
30”
23”
30”
30”
24”
11300
36”
30”
11401
48”
24”
11400
48”
30”
11501
60”
24”
11500
60”
30”
toll-free: 800.849.3429
TMBP, 2070, 20” Ø CUTOUT, (1) 8-000 Membrane Set
TMBP, 2070, 20” Ø CUTOUT, (1) 8-000 Membrane Set
TMBP, 2070, 20” Ø CUTOUT, (1) 8-000 Membrane Set
TOP MOUNT BIBOBP, 2070, 20” Ø CUTOUT, (1) 8-000
Membrane Set
TOP MOUNT BIBOBP, 59.75”X30”X30”, 2070, 20” Ø
CUTOUT, (1) 8-000 Membrane Set
TOP MOUNT BIBOBP, 71.75”X30”X30”, 2070, 20” Ø
CUTOUT, (1) 8-000 Membrane Set
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER COMPOUNDER’S
WORKSTATION
TOP MOUNT FAN/FILTER,DUAL POSITION DOOR,
COMPOUNDER’S WORKSTATION
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN/FILTER BALANCE ENCLOSURE
TOP MOUNT FAN, BAG IN BAG OUT FILTER, BALANCE
ENCLOSURE
TOP MOUNT FAN, BAG IN BAG OUT FILTER, BALANCE
ENCLOSURE
TOP MOUNT FAN, BAG IN BAG OUT FILTER, BALANCE
ENCLOSURE
TOP MOUNT FAN, BAG IN BAG OUT FILTER, BALANCE
ENCLOSURE
TOP MOUNT FAN, BAG IN BAG OUT FILTER, BALANCE
ENCLOSURE
TOP MOUNT FAN, BAG IN BAG OUT FILTER, BALANCE
ENCLOSURE
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
FS NUMBER
W
D
11601
72”
24”
11600
72”
30”
11800
96”
30”
12300
12400
12500
36”
48”
60”
30”
30”
30”
H
DESCRIPTION
TOP MOUNT FAN, BAG IN BAG OUT FILTER, BALANCE
ENCLOSURE
TOP MOUNT FAN, BAG IN BAG OUT FILTER, BALANCE
ENCLOSURE
TOP MOUNT FAN, BAG IN BAG OUR FILTER BALANCE
ENCLOSURE
TOP DRAFT BALANCE ENCLOSURE, NO FAN, NO FILTER
TOP DRAFT BALANCE ENCLOSURE, NO FAN, NO FILTER
TOP DRAFT BALANCE ENCLOSURE, NO FAN, NO FILTER
8-BLANK
8-000
8-085
8-095
8-105
8-115
8-120
8-125
8-135
8-145
8-155
8-160
8-165
8-185
FLAT DISK COVER,BLACK PHENOLIC,20”BASE
SET,NO ID CUTOUT,MEMBRANES,GUM RUBB
MEMBRANE SET, 8.5” ID, FOR DRUMS 9.5” Ø TO 10.5” Ø
MEMBRANE SET, 9.5” ID, FOR DRUMS 10.5” Ø TO 11.5” Ø
MEMBRANE SET, 10.5” ID, FOR DRUMS 11.5” Ø TO 12.5” Ø
MEMBRANE SET, 11.5” ID, FOR DRUMS 12.5” Ø TO 13.5” Ø
MEMBRANE SET, 12.0” ID, FOR DRUMS 13.0” Ø TO 14.0” Ø
MEMBRANE SET, 12.5” ID, FOR DRUMS 13.5” Ø TO 14.5” Ø
MEMBRANE SET, 13.5” ID, FOR DRUMS 14.5” Ø TO 15.5” Ø
MEMBRANE SET, 14.5” ID, FOR DRUMS 15.5” Ø TO 16.5” Ø
MEMBRANE SET, 15.5” ID, FOR DRUMS 16.5” Ø TO 17.5” Ø
MEMBRANE SET, 16.0” ID, FOR DRUMS 17.0” Ø TO 18.0” Ø
MEMBRANE SET, 16.5” ID, FOR DRUMS 17.5” Ø TO 18.5” Ø
MEMBRANE SET, 18.5” ID, FOR DRUMS 19.5” Ø TO 19.875” Ø
6550
STEEL MOBILE FOOT CONTROLLED HYDRAULIC LIFT CART
FOR BULK POWDER, 750# CAPACITY
LOW PROFILE,STEEL,FOOT CONTROL HYDRAULIC LIFT
CART-BULK POWDER, 150# CAP.
STAINLESS STEEL MOBILE FOOT CONTROLLED HYDRAULIC
LIFT CART FOR BULK POWDER
6551
6560
1020
1021
1025
1026
2’
2’
2’
2’
24”
24”
24”
24”
23.25”
23.25”
30.25”
30.25”
TABLE FS2009, FS2010, FS2300, and FS3910
CART FS2009, FS2010, FS2300, and FS3910
TABLE, 24.00”W X 30.25”D, FS10200
CART, 24.00”W X 30.25”D, FS10200
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
FS NUMBER
W
D
1030
1031
1035
36”
36”
36”
23.25”
23.25”
30.25”
1036
1040
36”
48”
30.25”
23.25”
1041
48”
23.25”
1045
48”
30.25”
1045S
1046
48.50”
48”
30.25”
30.25”
1046S
1050S
1051S
1055
1055S
1056
1056S
1060S
1061S
1065
1065S
1066
1066S
1085
1086
48.50”
60.50”
60.50”
60”
60.50”
60”
60.50”
72.50”
72.50”
72”
72.50”
72”
72.50”
96”
96”
30.25”
23.25”
23.25”
30.25”
30.25”
30.25”
30.25”
23.25”
23.25”
30.25”
30.25”
30.25”
30.25”
30.25”
30.25”
1001
1002
1645
2050VK
2051VKM
2052VK
2060
2061VKM
2062VK
52
toll-free: 800.849.3429
H
DESCRIPTION
TABLE, FS2014, FS2015, FS2350 and FS3915
CART, FS2014, FS2015, FS2350 and FS3915
TABLE, FS2230, FS2930, FS10300, FS11300 and
FS12015
CART, FS2230, FS2930, FS10300, FS11300 and FS12015
TABLE, FS2019, FS2020, FS2024, FS2025, FS2400, and
FS3920
CART, FS2019, FS2020, FS2024, FS2025, FS2400, and
FS3920
TABLE, FS2240, FS2940, FS10400, FS11400, and
FS12020
TABLE, FS10450, FS11450
CART, FS2240, FS2940, FS10400, FS11400, and
FS12020
CART, FS10450, FS11450
TABLE, FS2030 and FS2500
CART, FS2030 and FS2500
TABLE, FS2250, FS10500, FS11500, and FS12030
TABLE, FS10550, FS11550, and FS8500
CART, FS2250, FS10500, FS11500, and FS12030
CART, FS10550, FS11550 andFS8500
TABLE, FS2040 and FS2600
CART, FS2040 and FS2600
TABLE, FS2260, FS10600 and FS11600
TABLE, FS10650, and FS11650
CART, FS2260, FS10600 and FS11600
CART, FS10650 and FS11650
TABLE, FS2800, FS2280, FS10800, FS11800
CART, FS2800, FS2280, FS10800, FS11800
MINIHELIC PRESSURE GAUGE FOR DUAL STACK
MINIHELIC PRESSURE GAUGE FOR SNGL FLTRTN
ALARM,GO/NO GO
4” ID VENT KIT
4” ID VENT KIT W/ BULKHEAD FITTING
VENT KIT,(10’)4”HOSE AND (2)HOSE CLAMPS
VENT KIT, (2) 4” (1) 6” ID Ø
6” TO 4”/4” W/ BULKHEAD FITTING
VENT KIT,(8’)6”HOSE AND (2)HOSE CLAMPS
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
FS NUMBER
DESCRIPTION
2062VKM
VENT KIT,(8’)6”HOSE AND (2)HOSE CLAMPS W/BULKHEAD
FITTING
VENT KIT,(8’)6”HOSE W/4”REDUCER
VENT KIT,(8’)6”HOSE W/4”REDUCER & BULKHEAD FITTING
(2) 4’ LENGTH OF 6” Ø HOSE & (4) CLAMPS
(1) 4’ LENGTH OF 6” Ø HOSE & (2) CLAMPS
WASTE CHUTE (PORT) WITH RETAINING BAND AND BAG
6” D IRIS PORT
SURGICAL TUBING FOR WASTE CHUTE (4 Pack)
CLEANING KIT, 2000, 10000 AND 11000
PASS-THRU
PRINTER SHELF / ALARM MOUNT
PRINTER SHELF - NO ALARM MOUNT
THIMBLE CONNECTION, 4” TO 5” TRANSITION BLUE/WHITE
OBSOLETE FFH
THIMBLE CONNECTION,STAINLESS STEEL - FOR OBSOLETE FFH
THIMBLE CONNECTION, 6” TO 7” TRANSITION FOR TOP MOUNT
SYSTEMS
THIMBLE CONNECTION FOR WHITE FAN
4”BLAST GATE,PLASTIC, W/ CLAMPS
6”BLAST GATE,PLASTIC W/ CLAMPS
BRACKETS, FFH WALL MOUNT
FAN FILTER HOUSING 6ӯ WHITE
FAN FILTER HOUSING 6ӯ WHITE MINIHELIC GAUGE
BIBO FFH W/ CLAM SHELL, 6ӯ WHITE BODY, WHITE CAP
BIBO FFH W/ CLAM SHELL, 6ӯ WHITE BODY, WHITE CAP,
MINIHELIC
BAG OUT HEPA FILTER,99.99% EFFICIENCY
BAGOUT ULPA FILTER,99.9995% EFFICIENCY
BAG OUT HEPA,99.99%,ALUMINUM FRAME
BAGOUT ULPA FILTER,99.9995%.ALUMINUM FRAME
HEPA FILTER,99.99% EFFICIENT
REPLACEMENT HEPA (10000 SERIES),99.99% EFFICIENT, FOR 2’
TMBE (C - 2094)
6 PK PRE-FILTER REPLACEMENT
REPLACEMENT HEPA (10000 SERIES),99.99% EFFICIENT, FOR 3’
TMBE (C - 1744)
6 PLEATED PRE-FILTERS (FOR CARBON FILTER)
AIR DEFLECTOR FOR TOP MOUNT FANS
2063VK
2063VKM
2065VK
2066VK
2070
2071
2072
2073
2075
2076
2077
2080PE
2080SS
2081PE
2083
2084
2086
2090
4010
4010M
4020
4020M
4060
4065
4060ALM
4065ALM
4100
4125
4130
4135
4140
2085
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
FS NUMBER
DESCRIPTION
4145
REPLACEMENT HEPA (10000 SERIES), 99.99% EFFICIENT
FOR 4’ TMBE (C - 2049)
12 FABRIC PRE-FILTERS (FOR STANDARD HEPA FILTER
[FS4100])
REPLACEMENT HEPA (10000 SERIES),99.99% EFFICIENT,
FOR 5’ & 6’’ TMBE (C - 1743) Must Order (2) for ChangeOut
Bag In/Bag Out Replacement HEPA Filter
REPLACEMENT HEPA (11000 SERIES),99.99% EFFICIENT,
FOR 3’ TMBE
REPLACEMENT HEPA (11000 SERIES),99.99% EFFICIENT,
FOR 4’ TMBE
REPLACEMENT HEPA (11000 SERIES),99.99% EFFICIENT,
FOR 5’ & 6’’ TMBE, Must Order (2) for Change-Out
DUAL FAN FILTER HOUSING 6ӯ WHITE
DUAL FAN FILTER HOUSING 6ӯ WHITE MINIHELIC
GAUGE
DUAL STAGE BIBO FFH W/ CLAM SHELL, 6ӯ WHITE
BODY, WHITE CAP
DUAL STAGE BIBO FFH W/ CLAM SHELL, 6ӯ,
MINIHELIC
DUAL FILTRATION CONVERTER WHITE
4150
4155
4160
4165
4175
4185
4510
4510M
4520
4520M
4600
4000 SERIES
4251
4252
4254
4255
4256
4260
ORGANIC SOLVENT BED FILTER
ACID VAPORS / GAS FILTER
AMMONIA / AMINES FILTER
ALDEHYDE FILTER
MERCURY VAPOR FILTER
POTASSIUM PERMANGANATE FILTER
2’ TOP MOUNT CARBON
4451 - 18 x 22
4452 - 18 x 22
4454 - 18 x 22
4455 - 18 x 22
54
toll-free: 800.849.3429
FITS FS10200
ORGANIC FILTER - 3 CANISTERS
ACID VAPOR FILTER - 3 CANISTERS
AMMONIA / AMINES FILTER - 3 CANISTERS
ALDEHYDE FILTER - 3 CANISTERS
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
FS NUMBER
DESCRIPTION
3’ TOP MOUNT CARBON
4451 - 18 x 30
4452 - 18 x 30
4454 - 18 x 30
4455 - 18 x 30
ORGANIC FILTER - 4 CANISTERS
ACID VAPOR FILTER - 4 CANISTERS
AMMONIA / AMINES FILTER - 4 CANISTERS
ALDEHYDE FILTER - 4 CANISTERS
4’
4451 - 18 x 36
4452 - 18 x 36
4454 - 18 x 36
4455 - 18 x 36
4455 - 24 x 14
RK4451-18X22
RK4451-18X30
RK4451-18X36
RK4451-24X14
RK4452-18X22
RK4452-18X30
RK4452-18X36
RK4452-24X14
FITS FS10400, 10450, 11400, 11450
ORGANIC FILTER - 5 CANISTERS
ACID VAPOR FILTER - 5 CANISTERS
AMMONIA / AMINES FILTER - 5 CANISTERS
ALDEHYDE FILTER - 5 CANISTERS
5’/6’
4451 - 24 x 14
4452 - 24 x 14
4454 - 24 x 14
FITS FS10300, FS11300
FITS FS10500; 10550; 11500; 11550; 10600; 10650;
11600; 11650 (MUST BUY 2)
ORGANIC FILTER - 3 CANISTERS (MUST PURCHASE 2)
ACID VAPOR FILTER - 3 CANISTERS (MUST PURCHASE 2)
AMMONIA / AMINES FILTER - 3 CANISTERS (MUST
PURCHASE 2)
ALDEHYDE FILTER - 3 CANISTERS (MUST PURCHASE 2)
Top Mount Replacement Kits - Ordered with Prefix RK before Model #
3 Canisters - Includes Post Filters
4 Canisters - Includes Post Filters
5 Canisters - Includes Post Filters
3 Canisters - Includes Post Filters - (MUST PURCHASE 2
SETS)
3 Canisters - Includes Post Filters
4 Canisters - Includes Post Filters
5 Canisters - Includes Post Filters
3 Canisters - Includes Post Filters - (MUST PURCHASE 2
SETS)
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
FS NUMBER
DESCRIPTION
RK4454-18X22
RK4454-18X30
RK4454-18X36
RK4454-24X14
3 Canisters - Includes Post Filters
4 Canisters - Includes Post Filters
5 Canisters - Includes Post Filters
3 Canisters - Includes Post Filters - (MUST PURCHASE 2
SETS)
RK4455-18X22
RK4455-18X30
RK4455-18X36
RK4455-24X14
3 Canisters - Includes Post Filters
4 Canisters - Includes Post Filters
5 Canisters - Includes Post Filters
3 Canisters - Includes Post Filters - (MUST PURCHASE 2
SETS)
C 000000005766
C 000000000234
C 00000000S760
C 000000000936
C 000000001981
C 000000002442
CK2010
CK2015
CK2020
CK4120
4” SINGLE STACK PLENUM
WHITE CAP, 6” CONNECTION
DUAL STACK PLENUM (FOR 2020, 2025, ETC)
BLANK PLATE, FS2070
“WYE” CONNECTOR, ABS PLASTIC
4” to 6” REDUCER, ABS PLASTIC
PRE-FILTER CONVERSION KIT FOR 2010
PRE-FILTER CONVERSION KIT FOR 2015
PRE-FILTER CONVERSION KIT FOR 2020
BIBO CONVERSION KIT; (1) 2063VK, CLAM SHELL CAP,
DUCT COUPLING, FILTER
BIBO CONVERSION KIT; (1) 2060VK, CLAM SHELL CAP,
DUCT COUPLING, FILTER
VARIABLE SPEED CONTROL, 120 V
20 MFD CAPACITOR, 370V
Replacement Sensor for FS1645 Alarm
1/4-20 X 0.75 PHSS, NAT NYLON
HOSE CLAMP, 4” DIAMETER
HOSE CLAMP, 6” DIAMETER
6’ POWER CORD, 4000 SERIES FAN HOUSING
16’ POWER CORD, TOP MOUNT FAN HOUSING
1/4-20 HXNT, NYLON
115V 60Hz EBM BLOWER MOTOR
CK4125
E 000000000009
E 000000000033
E 000000000093
H 000000000002
H 000000000014
H 000000000015
E 000000000025
E 000000000103
H 000000000025
M 000000000001
56
toll-free: 800.849.3429
web: www.flowsciences.com
email: information@flowsciences.com
www.flowsciences.com
FS NUMBER
DESCRIPTION
S 000000000015
C 2049
C 2094
R 38
R 39
HINGE SET, INCLUDES: (1)HINGE, (2)SCREW BLOCKS, &
(4)SCREWS
Locking Latch / Door Detent - (1) Set includes (2)
latches and template
4’ REPLACEMENT FILTER ONLY - NO KIT
2’ REPLACEMENT FILTER ONLY - NO KIT
4” DIAMETER FLEX DUCT (SOLD PER FOOT)
6” DIAMETER FLEX DUCT (SOLD PER FOOT)
H-1181
H-1182
Berkshire Cleaning Tool
Berkshire Covers (25 Pads)
RK-H 000000378
How to Place an Order
1. Determine your specific application and containment needs to be addressed
2. Consider your workspace dimensions (refer to page 17 to sketch work area)
3. Determine your venting preferences (to house exhaust, to an external fan/filter, or recirculation back into the room
4. Contact a representative: 1-800-849-3429 or email information@flowsciences.com
Use this table of part numbers and descriptions as a reference guide. Replacement parts
can easily be reorded by referencing the corresponding part number. For assistance in
setting up a new containment solution, please contact a Flow Sciences representative.
Don’t see your application? Call us today! We fit our enclosure to YOUR application.
58