ELECTRONIC
TEMPERATURE
TRANSMITTERS
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
441
Type T19.10 Analog Temperature Transmitter
Standard Features



Input: PT 100 OR thermocouples
Configurable Co Ranges Using Solder Pads
RTD or Thermocouple
Programmable Ranges
Economical
Output: 4 …20 mA, 2 wire design
Fault Signal: For sensor burnout and sensor short circuiting
Temperature Range: Large ambient temperature range
Size: Compact
Guarantee: 5 years
Type T19.10
Analog Temperature Transmitter
Datasheet: T19.01
Ready-To-Ship Temperature Transmitters
Description
Type
Part #
Type J Fe-CuNi
Type K Fe-CuNi
Type T Fe-CuNi
Pt100 Small Range
Pt100 Large Range
4338066
4338074
4338058
4338031
4338040
Type T19.30 Analog Temperature Transmitter
Standard Features
Input: PT 100 OR thermocouples
Configurable Co Ranges



RTD or Thermocouple
Programmable Ranges
DIN Rail Mount
Output: 4 …20 mA, 2 wire design
Fault Signal: For sensor burnout and sensor short circuiting
Temperature Range: Large ambient temperature range
Size: Compact
Guarantee: 5 years
Type T19.30
Analog Temperature Transmitter
Datasheet T19.30
Ready-To-Ship Temperature Transmitters
Description
Type
442
Type J Fe-CuNi
Type K Fe-CuNi
Type T Fe-CuNi
Pt100 Small Range
Pt100 Large Range
Part #
4338111
4338121
4338103
4338082
4338091
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
Type T23.10 Digital Temperature Transmitter
Thermocouple Only
Programmable
Isolated



Standard Features
Inputs: Thermocouples: J, K, N, T, E, L, U, R, S, B, W3, W5
Accuracy: Thermocouple: (Per DIN IEC 770, 23°C ±
5°C)±0.5°C or 0.05%FS or ± 10µv
Thermocouple Break Protection: Upscale (21 mA) or Downscale (3.6 mA)
Cold Junction Compensation: Internal,
Accuracy ±1.0°C
Measurement Update Time: 2/second
Maximum Lead Wire Resistance:
Thermocouple: 250 Ohm
Output: 4-20 mA
Maximum Output Load: RMAX < (VS - 9v) / 0.021 A
Type T23.10
Digital Temperature Transmitter
Load Effect: < 0.01% of span/100 Ohm
Power Supply: 9 to 36 Vdc
Power Supply Effect: < 0.005% of span/V
Isolation: 1500 Vac, 60 s
Environmental: Operating Temperature: -40 to 185°F
(-40 to 85°C); Humidity: 100%; Vibration: 10 Hz to 2 KHz, 5 g per DIN IEC 68 2-6; Warm-up time: 5 minutes
Construction: Case Material: Plastic; Dimensions: refer to drawings; Weight: 2.4oz (0.07kg)
Warranty: 5 years
Datasheet: T23.10
Ready-To-Ship Temperature Transmitters
Type
Standard
Description
Part #
4310853
Type T24.10 Temperature Transmitter
Standard Features
Configurable with Windows PC without sensor simulation,
remote configuration also possible from the control room via
the current loop
Analog signal processing, ideal for multiplex-systems



RTD Only
Programmable
Potted Electronics
For Pt 100 and resistance-sensors, 3 wire
Analog output 4 … 20 mA, 2 wire design
EMC Conformity per EN 61 326 and NAMUR NE 21
Sensor burnout monitoring in accordance with NAMUR NE 43
Compact design suitable for any DIN connection head of form B
Ready-To-Ship Temperature Transmitters
Description
Type
Part #
Standard
4363048
Type T24.10
Temperature Transmitters
Datasheet: T24.10
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
443
Type T12.10 Digital Temperature Transmitter
Standard Features
Inputs: Refer to table
Accuracy: RTD: (Per DIN IEC 770, 23°C ±5°C) ±0.2 °C or 0.1°C + 0.05% of valve; Thermocouple: (Per DIN IEC 770, 23°C ±5°C) 0.5°C or 10uV or 0.05% of value



Digital Temperature Transmitter
Programmable
CE Certified
Thermocouple Break Protection: Program-
mable, Upscale (23 mA) or Downscale (3.8 mA)
Cold Junction Compensation: Programmable internal or external (Pt 100), Accuracy ±1.0°C
RTD Wiring Configuration: 2, 3, or 4 wire
Response Time: Programmable 1 to 60 seconds. Measurement Update Time 2/second
Type T12.10
Maximum Lead Wire Resistance: Thermocouple: 500 Ohm; RTD: 10 Ohm per lead
Output: 4-20 mA
Maximum Output Load: RMAX < (VS - 9v) / 0.021 A
Load Effect: < 0.01% of span/100 Ohm
Power Supply: 9 to 36 Vdc
Power Supply Effect: < 0.005% of span/V
Isolation: 1500 Vac, 60 s
Environmental: Operating Temperature: -40 to 185°F (-40 to 85°C ); Optional Operating Temperature: -40 to 220°F (-40 to 105°C), -58 to 185°F(-50 to 85°C); Humidity: 100% non- condensing Vibration: 10 Hz to 2 KHz, 5 g per DIN IEC 68 2-6; Warm-up time: 5 minutes
Construction: Case Material: Plastic; Dimensions: 1.95" dia. (49.5 mm ), 1.12" ht.
(28.5 mm); Weight: 2.47 oz (0.07 kg.)
Warranty: 5 years
T-12 Programmable Inputs and Ranges
Input
Sensor Standard
Range °C
Range °F
J
IEC 584
-100 to 1200 -148 to 2192
K
IEC 584
-180 to 1372 -292 to 2500
N
IEC 584
-180 to 1300 -292 to 2372
T
IEC 584
-200 to 400 -328 to 752
E
IEC 584
-100 to 1000 -148 to 1832
Thermocouple L
DIN 43710 -100 to 900 -148 to 1652
U
DIN 43710 -180 to 600 -292 to 1112
R
IEC 584
-50 to 1760 -58 to 3200
S
IEC 584
-50 to 1760 -58 to 3200
B
IEC 584
400 to 1820 752 to 3308
W3
ASTM E988 0 to 2300
32 to 4172
W5
ASTM E988 0 to 2300
32 to 4172
RTD
Pt 100 Pt 100
-200 to 850 -328 to 1562
Ni 100 Ni 100
-60 to 250 -76 to 482
Linear 0 to 5K Ohm
Resistance
DC Voltage
-10 to 800 mV
(Unipolar)
Ready-To-Ship Temperature Transmitters
Description
Type
Standard
Rail Adapter
Configuration Set
Part #
3616933
3593789
3599490
Datasheet: T12.10
444
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
Min. Span
50 K
50 K
100 K
50 K
50 K
50 K
75 K
200 K
200 K
200 K
200 K
200 K
25 K
25 K
30 Ohm
5 mV
Type T12.30 Digital Temperature Transmitter
Standard Features
Inputs: Refer to table
Accuracy: RTD: (Per DIN IEC 770, 23°C ±5°C) ±0.2 °C or 0.025%FS + 0.1;Thermocouple: (Per DIN IEC 770, 23°C ±5°C) ±0.5 or 0.05%FS or ± 10µv Thermocouple Break Protection: Programmable, Upscale (23 mA) or Downscale (3.8 mA)



Digital Temperature Transmitter
Programmable
DIN Rail
Cold Junction Compensation: Programmable internal or external (Pt 100), Accuracy ±1.0°C
RTD Wiring Configuration: 2, 3, or 4 wire
Response Time: Programmable 1 to 60 seconds
Measurement Update Time: 2/second
Maximum Lead Wire Resistance: Thermocouple: 5
00 Ohm; RTD: 10 Ohm per lead
Type T12.30
Output: 4-20 mA
Maximum Output Load: RMAX < (VS - 9v) / 0.021 A
Load Effect: < 0.01% of span/100 Ohm
Power Supply: 9 to 36 Vdc
Power Supply Effect: < 0.005% of span/V
Isolation: 1500 Vac, 60 s
Environmental: T12.30 Operating Temperature:
-14 to 158°F (-25 to 70ºC); Humidity: 100% non-
condensing; Vibration: 10 Hz to 2 KHz, 5 g per DIN IEC 68 2-6; Warm-up time: 5 minutes
Construction: Case Material: Plastic; Weight: T12.10: 2.4oz (0.07kg); T12.30: 7oz (0.2kg)
Warranty: 5 years
T-12 Programmable Inputs and Ranges
Input
Sensor Standard
Range °C
Range °F
J
IEC 584
-100 to 1200 -148 to 2192
K
IEC 584
-180 to 1372 -292 to 2500
N
IEC 584
-180 to 1300 -292 to 2372
T
IEC 584
-200 to 400 -328 to 752
E
IEC 584
-100 to 1000 -148 to 1832
Thermocouple L
DIN 43710 -100 to 900 -148 to 1652
U
DIN 43710 -180 to 600 -292 to 1112
R
IEC 584
-50 to 1760 -58 to 3200
S
IEC 584
-50 to 1760 -58 to 3200
B
IEC 584
400 to 1820 752 to 3308
W3
ASTM E988 0 to 2300
32 to 4172
W5
ASTM E988 0 to 2300
32 to 4172
RTD
Pt 100 Pt 100
-200 to 850 -328 to 1562
Ni 100 Ni 100
-60 to 250 -76 to 482
Linear 0 to 5K Ohm
Resistance
DC Voltage
-10 to 800 mV
(Unipolar)
Min. Span
50 K
50 K
100 K
50 K
50 K
50 K
75 K
200 K
200 K
200 K
200 K
200 K
25 K
25 K
30 Ohm
5 mV
Ready-To-Ship Temperature Transmitters
Description
Type
Standard
Configuration Set
Part #
3625321
3599490
Datasheet: T12.30
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
445
Type T32.10/T32.30
Digital Temperature Transmitter



Standard Features
Inputs: Refer to table
Accuracy: RTD: (Per DIN IEC 770, 23°C ±5°C) ±0.08 °C; Thermocouple: (Per DIN IEC 770, 23°C ±5°C) ±0.3°C or ±5 mV whichever is greater; Millivolt: ±5 mV or 0.006% of span
Digital Temperature Transmitter
Programmable
HART® Communicator
Thermocouple Break Protection:
Programmable, Upscale (23 mA) or Downscale (3.8 mA)
Cold Junction Compensation:
Programmable internal or external (Pt 100), Accuracy ±0.8°C
Type T32.10
RTD Wiring Configuration: 2, 3, or 4 wire
Type T32.30
Response Time: Programmable 1 to 60 seconds
Input
Sensor
Thermocouple
J
K
N
T
E
L
U
R
S
B
RTD
Pt 100
Ni 100
Linear
Resistance
DC Voltage
Millivolt
Measurement Update Time: 2/second
Maximum Lead Wire Resistance: Thermo-
couple: 250 Ohm; RTD: 30 Ohm per lead
Output: 4-20 mA
Maximum Output Load:
RMAX < (VS - 12v) / 0.022 A
Power Supply: 12 to 42 Vdc
Isolation: 1500 Vac, 60 s
Environmental: Operating Temperature:
-40 to 185°F (-40 to 85°C ); Optional Operating Temperature: -40 to 220°F(-40 to 105°C) -58 to 185°F(-50 to 85°C) Humidity: 100% non-condensing; Vibration: 10 Hz to 2 KHz, 5 g per DIN IEC 68 2-6;
Warm-up time: 5 minutes
T-32 Programmable Inputs and Ranges
Standard
Range °C Range °F
Min. Span
IEC 584
-210 to 1200 -346 to 2192
IEC 584
-270 to 1372 -454 to 2502
IEC 584
-270 to 1300 -454 to 2372
EIC 584
-270 to 400 -454 to 752 50 °C or 2 mV
IEC 584
-270 to 1000 -454 to 1832 whichever is
DIN 43710 -200 to 900 -328 to 1652 greater
DIN 43710
IEC 584
EIC 584
EIC 584
EN 60 751
DIN 43760
-200 to 600
-50 to 1768
-50 to 1768
0 to 1820
-200 to 850
-60 to 250
-328 to 1112
-58 to 3214
-58 to 3214
32 to 3308
10 °C or 3.8
-328 to 1562 whichever is greater
-76 to 482
4 Ohm/32 Ohm
0 to 700 / 0 to 5K Ohm
30 Ohm
-400 to 1200 mV
2 to 32 mV
Construction: Case Material: Plastic;
Dimensions: 1.95" dia. (49.5 mm ), 1.12" ht.
(28.5 mm) Weight: 2.47 oz (0.07 kg.)
Ready-To-Ship Temperature Transmitters
Warranty: 5 years
Type
T32.10 - Standard
T32.30 - Standard
Description
Part #
3599717
4266669
Datasheet: T32.10 & T32.30
446
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
Type T42.10 Temperature Transmitter



Standard Features
 Field bus protocol PROFIBUS PA
 Configurable for connection to RTDs, Thermocouples,
Resistance - sensor, mV - sensor
Profibus PA Transmitter
Programmable
Digital Temperature Transmitter
 Customer specific linearisation with max. 30 points
for sensors with W - or mV - output
 class protection, intrinsically safe per FISCO-Model
II 1 G EEx ia ll B / II C T4 / T5 / T6
II 2 G EEx ib ll B / II C T4 / T5 / T6
 EMC Conformity per DIN EN 50 081 - 1, DIN EN 50 082 - 2,
NAMUR NE 21
Type T42.10
Digital Temperature Transmitter
 Isolation voltage AC 1500 V between sensor and bus
 100% Rh protection, moisture condensation permissible
 Increased ambient temperature
 Configurable via e.g. SIMATIC PDM or Freelance 2000
 Terminal connections with captive screws
Ready-To-Ship Temperature Transmitters
Description
Type
Standard
Part #
4373019
Data sheet: T-12.30
For pricing info, call 1-888-WIKA-USA or visit www.wika.com
447