Leica Geosystems Metrology
Accessories Catalog 2006
Leica Laser
Tracker Accessories
Catalog 2006
Contents
Leica Laser Trackers . . . . . . . . . . . . . . . . . . . 06
Leica Industrial Theodolites
& Total Stations . . . . . . . . . . . . . . . . . . . . . . 56
4
Notes for
the Reader
Thank you for ordering a copy of the 2006 Leica Metrology Accessories Catalog. This catalog
contains the complete range of accessories available for Leica Laser Trackers and Leica Industrial
Theodolites & Total Stations. Regardless of your particular application and the Leica Metrology
products you use – from Leica Laser Trackers, Leica Industrial Theodolites & Total Stations and
everything in-between – we have you covered. Easy-to-interpret diagrams and product illustrations
& descriptions let you quickly find the Leica Metrology accessories that are ideally suited for the
task at hand.
Most items feature a description and a picture. Some accessories show an example of how the
items can be used in a typical configuration and what benefit they bring.
All of our accessories, just like the rest of the Leica Metrology products, offer the same top-notch,
no-nonsense design and quality. If you have any questions about our product accessories, please
contact your authorized Leica Metrology sales person to receive competent guidance and make an
appropriate purchasing decision.
Sincerely,
Your Leica Metrology Team
Leica Laser Trackers
Leica Laser Tracker Configuration
for Standard Tracking Systems . . . . . . . . . . . . 08
Leica Laser Tracker Configuration
for Probing Systems . . . . . . . . . . . . . . . . . . . . . 10
Leica Laser Tracker Configuration
for Scanning Systems . . . . . . . . . . . . . . . . . . . 12
Universal CMM Accesories
Leica T-Probe/T-Probe II . . . . . . . . . . . . . . . . . . . 14
Leica T-Cam . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Leica T-Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Tracker Stands . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cables & UPS . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Remote Control Equipment . . . . . . . . . . .
Levelling Equipment . . . . . . . . . . . . . . . .
Overview Camera Equipment . . . . . . . . .
Meteo Station & Accessories . . . . . . . . .
Leica Reflectors . . . . . . . . . . . . . . . . . . . .
Leica Laser Tracker 1.5” Reflector Holders
Leica Laser Tracker 0.5” Reflector Holders
Special Reflector Holders . . . . . . . . . . . . .
Hidden Point Bars . . . . . . . . . . . . . . . . . .
Compensation and Field Check Tools . . .
Shipping Container and Measuring Cart . .
6
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
20
21
21
22
24
26
36
42
46
53
55
Leica Laser Tracker Configuration
for Standard Tracking Systems
8
Reflectors
501 - 510
Reflector Holders
and Accessories
601 - 640
Leica T-Probe/T-Probe II and
Accessories
201 - 219
9
Leica Laser Tracker Configuration
for Probing Systems
10
Reflectors
501 - 510
Reflector Holders
and Accessories
601 - 640
Leica T-Probe/T-Probe II and
Accessories
201 - 219
11
Laser Tracker Configuration
for Scanning Systems
12
Reflectors
501 - 510
Reflector Holders
and Accessories
601 - 640
Leica T-Probe/T-Probe II and
Accessories
201 - 219
13
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
Leica T-Probe/T-Probe II
576 231
T-Probe II styli kit
202
opt. opt.
Recommended stylus kit for T-Probe II. Comes with 5
different styli (Scribe stylus r=0.1mm - M2, Ruby ball
stylus d=3mm - M5, Ruby ball stylus d=6mm - M5,
Ceramic hemispherical stylus d=0.5in - M4, Ceramic
hemispherical stylus d=1.0in - M4), 3 styli extensions
(100mm - M5 - carbon fibre - stem d=20mm, 200mm M5 - carbon fibre - stem d=20mm, 40mm - M5 - carbon - stem d=11mm), 2 T-Probe II stylus adaptors M5 with precision quick release for self identification,
stylus tools for M2-M3/M4/M5 threaded styli, stylus
adaptor M5-M4 and T-Probe II styli kit case.
576 211
T-Probe II styli kit case for standard configuration (empty)
202
opt. opt.
576 212
T-Probe II stylus adaptor – M5
203
opt. opt.
204
opt. opt.
Precision quick release adaptor for T-Probe II styli to
remove and attach styli without re-calibration. The
stylus adaptor has built in intelligence to support stylus
self identification.
575 947
T-Probe Holder
Optional T-Probe holder for save positioning the
T-Probe on workstations and measurements surfaces
such as car bodies.
575 972
Cable T-Probe, 10m
205
opt. opt.
575 973
Cable T-Probe, 20m
206
opt. opt.
575 983
T-Probe replacement battery
207
opt. opt.
575 987
Magnetic T-Probe Stylus Compensation Kit
208
opt. opt.
Optional for save positioning on magnetic materials to
perform stylus compensations.
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
14
Universal CMM Accessories
575 980
Leica T-Probe Compensation Kit
LTD840
Pos.
LTD709
Description
LTD640
Article No.
209
opt. opt.
210
opt. opt.
210
opt. opt.
210
opt. opt.
210
opt. opt.
210
opt. opt.
210
opt. opt.
For on-site compensation of T-Probe. It comes with
T-Probe reference frame, wedge tool, tripod screw and
light duty magnetic holder for 0.5 Red Ring Reflectors.
Requires additional 0.5 Red Ring Reflector (corner cube)
for compensation process. The T-Probe compensation kit
fits into the LeicaT-Cam compensation kit shipping container.
576 213
Stylus extension 100mm - M5 - carbon fibre - stem
d=20mm
576 214
Stylus extension 200mm - M5 - carbon fibre - stem
d=20mm
576 215
Stylus extension 400mm - M5 - carbon fibre - stem
d=20mm
576 216
Stylus extension 600mm - M5 - carbon fibre - stem
d=20mm
576 217
Stylus extension 40mm - M5 - carbon - stem
d=11mm
576 218
Stylus extension 100mm - M5 - carbon - stem
d=11mm
576 219
Scribe stylus r=0.1mm - M2
215
opt. opt.
576 220
Ruby ball stylus d=3mm - M5
215
opt. opt.
576 221
Ruby ball stylus d=6mm - M5
215
opt. opt.
15
Universal CMM Accessories
576 222
Edge stylus - M5
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
216
opt. opt.
Stylus tool for M2 and M3 threaded styli
217
opt. opt.
Stylus tool for M4 threaded styli
217
opt. opt.
576 225
Stylus tool for M5 threaded styli
217
opt. opt.
576 226
Stylus adaptor M5-M2
217
opt. opt.
576 227
Stylus adaptor M5-M4
217
opt. opt.
576 228
Stylus adaptor M4-M5
217
opt. opt.
576 229
Ceramic hemispherical stylus d=0.5in - M4
218
opt. opt.
576 230
Ceramic hemispherical stylus d=1.0in - M4
218
opt. opt.
Comes with edge sphere 0.5, magnetic stylus M5
and compensation sphere 0.5
576 223
576 224
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
16
Universal CMM Accessories
LTD840
Pos.
LTD709
Description
LTD640
Article No.
Leica T-Cam
575 926
Sync Package for LTCbase / plus
222
E
std. std.
Required for Leica T-Cam but also enables synchronization and trigger with external devices. Required for
upgrades and for Laser Tracker's delivered before Jan
2005 only.
575 979
Leica T-Cam compensation kit
223
opt. opt.
224
opt. opt.
For on-site compensation of T-Cam to Tracker. Requires
additional 0.5 Red-Ring Reflector (corner cube) for
compensation process. It is recommended to have at
least one compensation kit per factory. It comes with
transportation case.
575 975
Overview camera for Leica T-Cam
Optional overview camera that can be mounted to
T-Cam. It enables save and convenient reflector lock via
video image.
575 924
Cable T-Cam, 10m
225
opt. opt.
575 925
Cable T-Cam, 5m
225
opt. opt.
252
opt. opt.
253
opt. opt.
251
opt. opt.
Leica T-Scan
576 047
Reference Sphere with certificate Ø 100mm
Reference sphere with 100 mm diameter for field
check and alignment checks of the T-Scan system.
576 048
Reference Sphere Bar with certificate, 2m
Reference bar with 5 spheres at 40cm distance.
Each sphere to sphere distance is traceable
certified. Diffuse sphere surfaces are
special made for scanner measurements.
576 044
High speed computer
for fast data collection and powerful graphical visualization (Pentium 4 Processor with 3.0 Ghz;
2 DDRAM 512 MB; Quadro4 Graphics Card)
17
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
Tracker Stands
Worlds lightest heavy duty tripod featuring
Vibration free stand
Light for easy transportation
Large wheels for easy movements
Can be taken apart for transport
Quick release from minutes to seconds
575 998
Stand extension, 380mm (15)
311
opt. opt. opt.
312
opt. opt. opt.
313
opt. opt. opt.
314
opt. opt. opt.
Stand extension for Laser Tracker sensor.
575 999
Stand extension, 180mm (7)
Stand extension for Laser Tracker sensor.
575 997
Leica Tracker stand
The Leica Tracker stand is equipped with three levelling
screws and shock absorbing wheels.
1
575 246
Mounting plate for Laser Tracker.
Allows to mount the sensor unit onto machine beds
etc., requires part number 575 256.
576 106
315
Leica Stand Adaptor Rings
Used to adapt a Leica Laser Tracker to Leica stand or optical instrument stand for quick mounting or removable.
Material is hard coat aluminium in black anodized finish.
11.0
OUTSIDE
DIAMETER
11.0
OUTSIDE
DIAMETER
METRIC TAPPED HOLE FOR
LEICA TRACKER BASE
ALL BOLTS
(4 PLACES)
7.0
INSIDE
DIAMETER
CLEARANCE BOLT
HOLES FOR
LEICA LASER TRACKER HEAD
(Metric Mounting Bolt)
3/8 - 16 TAPPED HOLES
FOR CONNECTING
SHOULDER BOLTS
(4 PLACES)
.87
.87
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
18
Universal CMM Accessories
576 128
Leica Tracker Horizontal Mount
LTD840
Pos.
LTD709
Description
LTD640
Article No.
316
This mount allows the Leica tracker (without T-Cam) to
lay securely in the horizontal position in a unique V
nest (with or without adapter rings).
The mount will fit to the Leica stand or an heavy optical instrument stand with 3/8 thread. Material is hard
coat aluminium in black anodized finish.
Cables & UPS
Industrial cables and Network adapters for LAN as well
as UPS units
575 488
Motor cable to Leica Trackers 10m (33')
321
575 490
Motor cable to Leica Trackers, 5m (16')
322
575 489
Sensor cable to Leica Trackers 10m (33')
326
opt. opt. opt.
575 491
Sensor cable to Leica Trackers, 5m (16')
327
opt. opt. opt.
575 256
Elbow plug set, for motor- and sensor cable, comprising:
328
575 247
Elbow plug, for motor cable, 16 pin
575 248
Elbow plug, for sensor cable, 54 pin
575 899
LAN cable RJ45, 5m
opt. opt. opt.
L
opt. opt. opt.
331
opt. opt. opt.
LAN cable to connect Laser Tracker with application
computer
575 820
LAN board for Desktop PC
332
opt. opt. opt.
576 232
Wireless network adapter for Laptop/Desktop
333
opt. opt. opt.
WiFi USB Adapter connects to 802.11b/g networks
and hotspots. This article is used together with article
576233 to establish a network between application
computer (Laptop/Desktop) and Laser Tracker (emScon
Server). It comes with: USB Adapter for
Laptop/Desktop, cradle and instruction sheet. This network configuration (576232/576233) has been tested
by Leica and ensures system performance.
19
Universal CMM Accessories
576 233
Wireless network adapter for emScon Server
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
334
opt. opt. opt.
WiFi certified Access Point creates high-performance
802.11g wireless network. This article is used together
with article 576232 to establish a network between
application computer (Laptop/Desktop) and Laser
Tracker (emScon Server). It comes with: Access Point for
emScon Server, power adapter and instruction sheet.
This network configuration (576232/576233) has been
tested by Leica and ensures system performance.
575 992
Uninterruptible Power Supply UPS (220 Volt)
344
opt. opt. opt.
575 993
Uninterruptible Power Supply UPS (110 Volt)
345
opt. opt. opt.
341
opt. opt. opt.
342
opt. opt. opt.
343
opt. opt. opt.
Remote Control Equipment
575 757
Wireless RF Control (EU version)
Australia, EU, Czech Republic, Hungary, Malaysia,
Mexico, New Zealand, Norway, Philippines, Poland,
Russia, Switzerland, Thailand
(Radio Frequency: 40MHz, Plugs into a USB port on a
Windows computer)
Incl. CD with drivers and templates for Axyz, Metrolog
XG and emScon.
575 781
Wireless RF Control (US version)
US, Brazil, Canada, Israel
(Radio Frequency: 49Mhz, Plugs into a USB port on a
Windows computer)
Incl. CD with drivers and templates for Axyz, Metrolog
XG and emScon.
575 965
Wireless IR Control
Wireless Infra-Red Control unit for USB port.
Compatible with: Windows 98 SE, 2000, ME, XP or
higher.
Incl. CD with drivers and templates for Axyz, Metrolog
XG and emScon.
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
20
Universal CMM Accessories
LTD840
Pos.
LTD709
Description
LTD640
Article No.
Levelling Equipment
High-performing level
For measurements against gravity and monitoring
stability. Ready to measure to specs within minutes
(no need for 0-point adjustment)
Backward compatibility (except SMART310)
576 000
NIVEL230, inclination sensor for Laser Tracker with
351
opt. opt. opt.
352
opt. opt. opt.
353
opt. opt. opt.
361
opt. opt. opt.
RS232 interface; supports gravity based coordinate
measurements
576 026
NIVEL Adapter Kit
The NIVEL adapter kit is used to mount all NIVEL inclination sensor onto the Laser Tracker. Compatible with
LT(D)640, LTD706, LTD709, LTD840.
802 905
Cable, 1.5m (Lemo - Lemo)
To connect Laser Tracker with NIVEL20 or NIVEL230.
Overview Camera Equipment
The unique overview camera allows a quick location of
reflectors. While in joystick mode you direct the tracker to the point of interest. Thus it becomes an essential accessory for remotely controlled trackers.
446 000
Video Cable 10m, BNC / BNC,
(LT Controller to 575 785 View finder video board).
575 785
View finder video board for desktop PC, incl. Cable,
362
E
1.8m. For overview camera with old Axyz versions
under Windows NT
575 882
Video Grabber DX for Desktop (Axyz only), comprising:
1x 730735 Pixel View Model No. PC-CX881P (PCI),
1x 727502 Adapter Plug,
1x 446000 Video cable (10m),
1x 734412 Video Grabber Hardware Installation sheet
for Axyz Users. For Windows 2000 & Windows XP
21
366
opt. opt. opt.
Universal CMM Accessories
575 883
Video Grabber DX for Notebook (Axyz only), comprising:
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
366
opt. opt. opt.
365
opt. opt. opt.
1x 734694 Notebook Grabber (USB),
1x 727502 Adapter plug,
1x 446000 Video Cable (10m),
1x 734412 Video Grabber Hardware Installation sheet
for Axyz Users.
For Windows 2000 & Windows XP
575 986
Overview Camera for Laser Tracker
The Optional black/white overview camera mounts on
top of the Laser Tracker. It enables save and convenient
reflector lock via video image. The camera functionality
is supported during the various measuring modes of
LTD840, LTD706, LTD709, LTD640 Laser Tracker, which
has the absolute distance meter, built in.
Meteo Station & Accessories
The most precise sensor to monitor and correct the
atmospheric conditions. It is an essential accessory for
any precision measurements.
575 734
Set Meteo Station HM30 with integrated pressure sen-
401
L
opt. opt. opt.
sor, comprising:
Meteo Station HM30, RS232 cable, 9-pole female,
1.5m. Combo-sensor for humidity/temperature with
cable 3m. Power supply 100-240VAC/9VD/1150mA
with universal plugs for Europe, UK, USA/Japan
575 736
Meteo Station HM30
402
opt. opt. opt.
575 740
Combo-sensor humidity/temperature with cable, 3m
403
opt. opt. opt.
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
22
Universal CMM Accessories
LTD840
Pos.
LTD709
Description
LTD640
Article No.
575 755
Surface temperature sensor PT100, 30cm
404
opt. opt. opt.
575 754
Mini temperature sensor PT100
405
opt. opt. opt.
575 758
Power supply, 100-240VAC/9VDC,
411
opt. opt. opt.
with universal plugs for Europe, UK, USA/Japan,
Australia.
575 743
Leather case for meteo station HM30
412
opt. opt. opt.
575 737
Cable RS232 for meteo station HM30
421
opt. opt. opt.
575 748
Replacement cable to combo-sensor
419
opt. opt. opt.
575 741
Cable to combo-sensor, 3m
422
opt. opt. opt.
575 749
Cable to combo-sensor, 5m
423
opt. opt. opt.
575 750
Cable to combo-sensor, 15m
424
opt. opt. opt.
575 751
Cable to PT100, 3m
425
opt. opt. opt.
575 752
Cable to PT100, 5m
426
opt. opt. opt.
575 753
Cable to PT100, 25m
427
opt. opt. opt.
575 738
Multiplexer to connect up to 16 surface temperature
428
opt. opt. opt.
sensors (575 755), with cables to HM30.
5000 090
HM30 Factory Certification
opt. opt. opt.
Factory Certification for HM30, together with combosensor. Certificate issued for humidity, temperature and
pressure to the producer's standards, performed by
Revue Thommen in Switzerland. To be ordered at your
local service centre (or check local possibilities).
23
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
Reflectors
The widest range of offering for most various applications
575 784
Red-Ring Reflector (RRR) 1.5”, ball with hardened steel
501
opt. opt. opt.
502
opt. opt. opt.
503
opt. opt. opt.
surface. Corner cube reflector with removable ring, protection cover for optic and certificate, in wooden box
Radius 0.75” (19.05mm) ±0.0025mm,
Centring of optics ±0.006mm
Shape ball ±0.0015mm
Acceptance angle ±30°
Weight 170g
Applied for
- Standard applications
- Dynamic and static measurements
575 739
Red-Ring Reflector (RRR) 0.5”, ball with hardened steel
surface, Corner cube reflector with removable ring, protection cover for optic and certificate, in wooden box
Radius 0.25” (6.35mm) ±0.0025mm,
Centring of optics ±0.006mm
Shape ball ±0.0015mm
Acceptance angle ±30°
Weight 5g
Applied for
- Standard applications
- Automated inspection
575 769
Tooling Ball Reflector (TBR) 0.5”, without collar
ball with hardened steel surface,
ø 0.5” (12.07mm) ±0.01mm,
Centring of optics ±0.006mm
Shape ball ±0.01mm
Max. acceptance angle ±50° (±15° for error budget
< 0.01mm)
Weight 5g
Applied for
- Standard applications
- Automated inspection
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
24
Universal CMM Accessories
575 770
Tooling Ball Reflector (TBR) 0.5”, with collar
LTD840
Pos.
LTD709
Description
LTD640
Article No.
504
opt. opt. opt.
505
opt. opt.
506
opt. opt. opt.
507
opt. opt. opt.
ball with hardened steel surface,
ø 0.5” (12.07mm) ±0.01mm, Centring of optics
±0.006mm. Shape ball ±0.01mm. Max. acceptance
angle ±22° (±15° for error budget < 0.01mm)
Weight 5g
Applied for
- Standard applications
- Automated inspection
575 848
Reflectors for fixed installation (RFI) 0.5”, set of 5 pcs.,
ball with anodized aluminium surface,
ø 0.5” (12.07mm), Max. acceptance angle ±50°
Weight 5g.
Applied for
- Monitoring fixed installations
- Repeatability tests
- Relative measurements
- Deformation measurements
573 510
Cateye Reflector (CER), ball with hardened steel surface, ø 75mm (2.9528), ±0.05mm
Ball shape ±0.01mm
Centring of optics ±0.01mm
Max. acceptance angle ±60°
Weight 730gr
Applied for
- Robot and machine operations
- Dynamic and static measurements
575 847
Surface Reflector Kit including:
- Surface Reflector with lanyard
- Pin Point Stylus
- 3 mm Ruby Ball Stylus
- Edge Stylus
- Initialisation sphere
- Manual
25
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
Laser Tracker 1.5 Reflector Holders
576 083
Reflector Holder 1.5”, Offset H 24mm, Magnetic Base
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
with Shank A Ø 6mm, Negative Rotation
576 063
Reflector Holder 1.5”, Offset H 24mm, Magnetic Base
with Shank A Ø 8mm, Negative Rotation
576 085
Reflector Holder 1.5”, Offset H 24mm, Magnetic Base
with Shank A Ø 10mm, Negative Rotation
576 084
Reflector Holder 1.5”, Offset H 24mm, Magnetic Base
with Shank A Ø 12mm, Negative Rotation
576 087
Refl. Holder 1.5”, 25mm, Ø 5mm, MB, NEGR
Reflector Holder 1.5, Offset H 25mm, Magnetic Base
with Shank A Ø 5mm, Negative Rotation
576 076
Reflector Holder 1.5”, Offset H 25mm, Magnetic Base
with Shank A Ø 6mm, Negative Rotation
576 088
Refl. Holder 1.5”, 25mm, Ø 7mm, MB, NEGR
Reflector Holder 1.5”, Offset H 25mm, Magnetic Base
with Shank A Ø 7mm, Negative Rotation
576 077
Reflector Holder 1.5”, Offset H 25mm, Magnetic Base
with Shank A Ø 8mm, Negative Rotation
576 089
Reflector Holder 1.5”, Offset H 25mm, Magnetic Base
with Shank A Ø 9mm, Negative Rotation
576 086
Reflector Holder 1.5”, Offset H 25mm, Magnetic Base
with Shank A Ø 10mm, Negative Rotation
576 078
Reflector Holder 1.5”, Offset H 25mm, Magnetic Base
with Shank A Ø 12mm, Negative Rotation
576 064
Reflector Holder 1.5”, Offset H 1.0000”, Magnetic Base
with Shank A Ø 0.2500”, Negative Rotation
576 090
Reflector Holder 1.5”, Offset H 1.000”, Magnetic Base
with Shank A Ø 0.3125”, Negative Rotation
576 091
Reflector Holder 1.5”, Offset H 1.000”, Magnetic Base
with Shank A Ø 0.3750”, Negative Rotation
- Greatest amount of negative rotation below
horizontal position
- Allows for unobstructed 100% clear aperture
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
26
Article No.
Description
Pos.
Universal CMM Accessories
1.600
PR ECISION (3) P OINT N EST ON C/L OF
“A” DIAMETER WITHIN ± .0005
1.5000 DIAMETER
SMR REFERENCE
“ H” ± .0005
TO CENTERLINE
OF 1.500 SPHERE
MAGNET
"A" DIAMETER
PATENT PENDING
27
+.0000
- .0005
Universal CMM Accessories
576 082
Reflector Holder 1.5”, Offset H 24mm, Shankless,
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
620
*
opt. opt. opt.
620
*
opt. opt. opt.
620
*
opt. opt. opt.
Magnetic Base
576 075
Reflector Holder 1.5”, Offset H 25mm, Shankless
Magnetic Base
576 065
Reflector Holder 1.5”, Offset H 1.0000”, Shankless
Magnetic Base
- Centring and height tolerance within 0.0127mm
(0.0005)
- Steel with black oxide finish
- Heat-treated and hardened to Rockwell C 53-55
PRECISION (3) POINT NEST
ON C/L OF 1.6000 DIAMETER
WITHIN +/-.0005
1.5000 DIAMETER
SMR REFERENCE
“H” +/-.0005
TO CENTERLINE
OF 1.500 SPHERE
MAGNET
3/32 45° CHAMFER
ON (1) SIDE FOR
CLEARANCE OVER
INSIDE CORNER RADIUS
MAGNETS
1.6000 +/-.0005
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
28
Universal CMM Accessories
576 066
Reflector Holder 1.5”, Offset H 1.0000, with Shank A
620
Ø 0.2500”, Body Ø 0.750”
- Centring and height tolerance within 0.0127mm
(0.0005)
- Steel with black oxide finish
.750 DIAMETER
1.500 DIAMETER SPHERE
REFERENCE
ON CENTERLINE OF SHANK
W/IN +/-.0005
“H” +/-.0005
TO CENTERLINE
OF 1.500 SPHERE
MAGNET
"A" DIAMETER
29
+.0000
- .0005
*
LTD840
Pos.
LTD709
Description
LTD640
Article No.
opt. opt. opt.
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
576 097
Edge Reflector Holder 1.5”, offset H 25mm
620
opt. opt. opt.
576 098
Edge Reflector Holder 1.5”, Offset H 1.0000”
620
opt. opt. opt.
- Centring and height tolerance within 0.0127mm
(0.0005)
- Steel with black oxide finish
- Heat-treated and hardened to R/C35-55
CENTERLINE OF PRECISION
(3) POINT NEST IN LINE WITH
DATUM "A" WITHIN +/-.0005
DATUM “A”
1.500 DIAMETER
SMR REFERENCE
“H” +/-.0005
TO CENTERLINE
OF 1.500 SPHERE
MAGNET
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
30
Universal CMM Accessories
576 099
Edge Reflector Holder 1.5”, Offset H 25mm 2-1/4
620
CENTERLINE OF PRECISION
(3) POINT NEST IN LINE WITH
DATUM "A", DATUM “B” AND THE
SHARP EDGE INTERSECTING
POINT WITHIN +/-.0005
*
DATUM "A"
1.500 DIAMETER
SMR REFERENCE
“H” +/-.0005
TO CENTERLINE
OF 1.500 SPHERE
MAGNET
1/4 LOCATING QUADRANT
*
31
DATUM "B"
LTD840
Pos.
LTD709
Description
LTD640
Article No.
opt. opt. opt.
Universal CMM Accessories
576 100
Edge Reflector Holder 1.5”, Offset H 1.000”, 2-1/4
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
620
opt. opt. opt.
620
opt. opt. opt.
620
opt. opt. opt.
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
- Heat-treated and hardened to R/C35-55
- CAUTION: These items will not balance over an edge
by themselves but must be securely fastened to
prevent reflector from dropping
576 101
Drift Nest Neg 1.5, Offset H 1.0000”
- Universal target for non-critical reference
- Can be glued or bonded to surface
- Height tolerance within 0.254mm (0.010”)
- Aluminium with black anodized finish
- Hard-coat
1.500 DIAMETER SMR
REFERENCE
1.000 +/-.010
TO CENTERLINE
OF 1.500 SPHERE
MAGNET
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
32
Universal CMM Accessories
576 102
Foundation Reflector Holder 1.5”
620
- Can be mounted to floor for permanent target reference
- Stainless steel
(3) POINT NEST FOR
LOCATING 1.5 SMR OR
OTHER 1.5 SPHERICAL
TARGET
1.5000 DIAMETER
SMR REFERENCE
MAGNET
1.25
MEDIUM
KNURL
2.0
REMOVABLE BRASS CAP WITH 0-RING SEAL
2.0
RETAINER
10-32 SCREW WITH
O-RING SEAL
33
LTD840
Pos.
LTD709
Description
LTD640
Article No.
opt. opt. opt.
Universal CMM Accessories
576 096
Reflector Holder 1.5”, Offset H 25mm, Magnetic Base
620
with Shank A Ø 10mm, 1.0 Inch Body
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
1.500 DIAMETER SPHERE
REFERENCE
ON CENTERLINE OF SHANK
W/IN +/-.0005
“H” +/-.0005
TO CENTERLINE
OF 1.500 SPHERE
MAGNET (4) PLACE S
"A" DIAMETER
+.0000
- .0005
1.000
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
34
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
opt. opt. opt.
Universal CMM Accessories
576 134
Tripod Reflector Holder 1.5”
620
opt. opt. opt.
- Tripod reflector holder for consistent reference point
- Steel with black oxide finish
*
(3) POINT NEST
LOCATING AREA
1.5000 DIAMETER
SMR REFERENCE
MAGNET
1/4” HOLE
5/8-11
35
LTD840
Pos.
LTD709
Description
LTD640
Article No.
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
Laser Tracker 0.5” Reflector Holders
576 092
Reflector Holder 0.5”, Offset H 10mm, Magnetic Base
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
with Shank A Ø 5mm
576 070
Reflector Holder 0.5”, Offset H 10mm, Magnetic Base
with Shank A Ø 6mm
576 093
Reflector Holder 0.5”, Offset H 10mm, Magnetic Base
with Shank A Ø 7mm
576 056
Reflector Holder 0.5”, Offset H 10mm, Magnetic Base
with Shank A Ø 8mm
576 094
Reflector Holder 0.5”, Offset H 10mm, Magnetic Base
with Shank A Ø 9mm
576 073
Reflector Holder 0.5”, Offset H 10mm, Magnetic Base
with Shank A Ø 10mm
576 074
Reflector Holder 0.5”, Offset H 10mm, Magnetic Base
with Shank A Ø 12mm
576 067
Reflector Holder 0.5”, Offset H 12mm, Magnetic Base
with Shank A Ø 6mm
576 058
Reflector Holder 0.5”, Offset H 12mm, Magnetic Base
with Shank A Ø 8mm
576 080
Reflector Holder 0.5”, Offset H 12mm, Magnetic Base
with Shank A Ø 10mm
576 081
Reflector Holder 0.5”, Offset H 12mm, Magnetic Base
with Shank A Ø 12mm
576 072
Reflector Holder 0.5”, Offset H 20mm, Magnetic Base
with Shank A Ø 4.75mm
576 059
Reflector Holder 0.5”, Offset H 0.5000, Magnetic Base
with Shank A Ø 0.2500
576 060
Reflector Holder 0.5”, Offset H 0.5000, Magnetic Base
with Shank A Ø 0.3125
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
36
Universal CMM Accessories
576 095
Reflector Holder 0.5”, Offset H 0.5000, Magnetic Base
LTD840
Pos.
LTD709
Description
LTD640
Article No.
630
opt. opt. opt.
630
opt. opt. opt.
with Shank A Ø 0.3750
576 061
Reflector Holder 0.5”, Offset H 0.5000, Magnetic Base
with Shank A Ø 0.5000
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
37
Universal CMM Accessories
576 057
Reflector Holder 0.5”, Offset H10mm, Shankless
576 079
Reflector Holder 0.5”, Offset H 12mm, Shankless
576 062
Reflector Holder 0.5”, Offset H 0.5000, Shankless
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
.5000 +/-.0005
.5000 DIAMETER SPHERE
REFERENCE ON CENTERLINE
OF .5000 INCH BODY
WITHIN +/-.0005
“H” +/-.0005
TO CENTERLINE
OF .5000 SPHERE
MAGNET (2) PLACES
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
38
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
630
opt. opt. opt.
630
opt. opt. opt.
630
opt. opt. opt.
Universal CMM Accessories
LTD840
Pos.
LTD709
Description
LTD640
Article No.
576 068
Reflector Holder 0.5, Offset 10mm, with Shank Ø 5mm
630
opt. opt. opt.
576 069
Reflector Holder 0.5”, Offset H 12mm, Shank A Ø 6mm
630
opt. opt. opt.
576 051
Reflector Holder 0.5”, Offset H 0.3125”, Shank A Ø 0.2500
630
opt. opt. opt.
576 071
Reflector Holder 0.5”, Offset H 0.5000”, Shank A Ø 0.1875
630
opt. opt. opt.
576 103
Reflector Holder 0.5”, Offset H 0.5000”, Shank Ø 0.2500
630
opt. opt. opt.
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
.5000
.5000 DIAMETER SPHERE
REFERENCE ON CENTERLINE
OF SHANK WITHIN +/-.0005
“H” +/-.0005
TO CENTERLINE
OF .500 SPHERE
MAGNET
"A" DIAMETER
39
+.0000
- .0005
Universal CMM Accessories
576 135
Reflector Holder 0.5” Drift Nest, Offset H 0.5000”
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
630
opt. opt. opt.
630
opt. opt. opt.
- Universal target for non-critical reference
- Can be glued to surface
- Height tolerance within 0.254mm (0.010”)
- Steel with black oxide finish
.5000 DIAMETER REFERENCE
.500 +/-.010
HEIGHT
576 136
MAGNET
Reflector Holder 0.5” Target Corner, Offset H 0.5000”
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
.5000 DIAMETER TBR REFERENCE
“H” +/-.0005
TO CENTERLINE
OF .5000 SPHERE
DATUM “A”
MAGNET
TBR REFERENCE IN LINE WITH
DATUM “A” WITHIN +/-.0005
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
40
Universal CMM Accessories
576 137
Reflector Holder 0.5”, Offset H 0.5000”, Shank A
LTD840
Pos.
LTD709
Description
LTD640
Article No.
opt. opt. opt.
Ø 0.2500”, Negative Rotation
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
.5000 DIAMETER TBR REFERENCE
ON CENTERLINE WITHIN +/-.0005
“H” +/-.0005
TO CENTERLINE
OF .5000 SPHERE
MAGNET
"A" DIAMETER
+.0000
- .0005
PATENT PENDING
575 771
Magnetic holder with zero thickness for 0.5” reflectors
41
opt. opt. opt.
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
Special Reflector Holders
576 054
Magnetic Holder Set for Bird Bath
630
- Bird bath adapter for 0.5” and 1.5 reflectors
- Compatible with 500/600/700/800 Leica Laser
Tracker as well as IFM distance tool
- Height tolerance within 0.0127mm (0.0005”)
- Stainless steel
.5 SPHERE
REFERENCE
MAGNET
+.0000
12MM - .0005
1.5 SPHERE
REFERENCE
25MM +/-.0005
TO CENTERLINE
OF 1.500 SPHERE
MAGNET
+.0000
12MM - .0005
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
42
opt. opt. opt.
Universal CMM Accessories
576 053
Magnetic Holder 1.5” for Bird Bath
LTD840
Pos.
LTD709
Description
LTD640
Article No.
opt. opt. opt.
- Bird bath adapter for 1.5” reflectors
- Compatible with 500/600/700/800 Leica Laser
Tracker as well as IFM distance tool
- Height tolerance within 0.0127mm (0.0005”)
- Stainless steel
1.5 SPHERE
REFERENCE
630
25MM +/-.0005
TO CENTERLINE
OF 1.500 SPHERE
MAGNET
640
12MM +/-.0005
575 778
Starter bolt for tooling ball reflector 0.5
opt. opt. opt.
576 052
Heavy Duty Magnetic Holder for tooling ball reflectors
opt. opt. opt.
0.5”
576 127
Light Duty Magnetic Holder for tooling ball reflectors
0.5”
43
opt. opt. opt.
Universal CMM Accessories
576 055
Heavy Duty Magnetic Reflector Holder Adaptor for
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
opt. opt. opt.
supports with shank Ø 12mm
- Universal magnetic holder for critical temporary
references whilst field check or as common point
for move station
- Hard anodized aluminium
SLIP FIT FOR 12MM +/-.0005
640
36MM
640
MAGNET
MAGNET SAVER
640
640
576 104
Leica Lanyard Set 1 (full) for safe handling of 1.5”
opt. opt. opt.
reflectors
576 105
Leica Lanyard Set 2 (partial) for safe handling of 1.5”
reflectors
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
44
opt. opt. opt.
Universal CMM Accessories
576 107
Track and Punch SMR Nest 1.5”
opt. opt. opt.
- Allows a 1.5” reflector to be tracked and positioned
into a position, then a light tap with a small hammer
on the striker will produce a small accurately located
center punch mark.
LANYARD PORT
BASE MAGNET 3 PLACES
A
A
(3) POINT NEST FOR LOCATING
SPHERICALLY MOUNTED
RETRO REFLECTOR
OFFSET: 2 INCH
BODY DIAMETER: 2-1/2 INCHES, KNURLED
PUNCH: HARDENED TO 58-62 ROCKWELL
FEATURES:
SMR IS ABLE TO ROTATE UP 90 DEGREES
STRIKER
SMR IS HELD IN PLACE BY A MAGNET AND/RETAINER
IF DESIRED
LANYARD PORT IS LOCATED ON SIDE OF THE BODY
1.5000 DIAMETER
SMR REFERENCE
2.0 +/- .01
MAGNET
ALUMINUM BODY
BLACK, HARD
COAT FINISH
PATENT PENDING
( SECTION A )
45
LTD840
Pos.
LTD709
Description
LTD640
Article No.
MAGNET 3 PLACES
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
Hidden Point Bars
Typical accessories for Laser Tracker without T-Probe
to measure hidden points by
a) dynamic sphere measurement => hidden point
= sphere centre
b) measuring two stationary points
575 854
Sphere fit tool for Cateye reflector
640
opt. opt. opt.
576 108
Bar Extension, Length 3.000”, Shank Ø 0.2500”
640
opt. opt. opt.
"A" +.0000/-.0005
BEX - 1 ONLY
+.0003
.2500 - .0000
NYLON SET SCREW
+.0000
.2500 - .0005
1.000 +/-.0005
6-32 (2) PLACES
TAPPED HOLE
BEX-3
BEX-5
BEX-10
.45
3.000 +/-.0005
5.000 +/-.0005
10.000 +/-.0005
576 109
Bar Extension, Length 5.000”, Shank Ø 0.2500”
640
opt. opt. opt.
576 110
Bar Extension, Length 10.000”, Shank Ø 0.2500”
640
opt. opt. opt.
576 111
Bar Extension, Length 1.000”, Shank Ø 6mm
640
opt. opt. opt.
576 112
Bar Extension, Length 1.000”, Shank Ø 8mm
640
opt. opt. opt.
576 113
Bar Extension, Length 1.000”, Shank Ø 10mm
640
opt. opt. opt.
576 138
Bar Extension, Length 1.000”, Shank Ø 0.1875
640
opt. opt. opt.
576 139
Bar Extension, Length 1.000”, Shank Ø 0.3125
640
opt. opt. opt.
576 140
Bar Extension, Length 1.000”, Shank Ø 0.3750
640
opt. opt. opt.
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
46
Universal CMM Accessories
576 114
Reflector Holder 0.5”, Hidden Point Bar Adaptor
640
LTD840
Pos.
LTD709
Description
LTD640
Article No.
opt. opt. opt.
- Assembles with different bar extension lengths and
holds an 0.5” reflector on centreline
- Steel with black oxide finish
+.0003
.2500 - .0000
NYLON
SET SCREW
TAPPED 6/32
(2 PLACES)
AIR HOLE
2.500 +/-.0005
MAGNET INSERT
.5000 +/-.0005
+.0000
.2500 - .0005
.500 DIAMETER SMR
(REFERENCE),
ON CENTERLINE WITHIN +/-.0005
576 115
Hidden Point Bar Holder
640
opt. opt. opt.
- For adapting a hidden point or bar extension to a
magnetic base for support
- Steel with black oxide finish
BRASS THUMB SCREW
.375
1/2” SLIP FIT FOR HIDDEN POINT BARS
AND BAR EXTENSIONS
47
Universal CMM Accessories
576 116
Sphere Fit Adaptor
640
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
opt. opt. opt.
- Adapts onto the end of a bar extension similar to a
hard point, and allows the user to locate a conical
nest around a construction ball in order to generate
a sphere fit routine
- Steel with black oxide finish
1.000 +/-.0005
+.0003
.2500 - .0000
.500
.5000 DIAMETER
CONSTRUCTION BALL
REFERENCE
NOT INCLUDED
576 117
INTERNAL
6-32 SET SCREW
FOR MOUNTING TO
BAR EXTENSION
Hard Point
640
- Adapts onto the end of a bar extension or hidden
point bar, and allows the user to locate scribe lines
or surfaces
- Hardened to R/C 53-55
- Steel with black oxide finish
INTERNAL
6-32 SET SCREW
1.000 +/-.0005
60°
+.0005
.2500 DIA. - .0000
.500
* .005 - .007 FLAT ON
END OF POINT
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
48
opt. opt. opt.
Universal CMM Accessories
576 129
Tooling Ball Adaptor
640
LTD840
Pos.
LTD709
Description
LTD640
Article No.
opt. opt. opt.
- Mounts to hidden point bar or bar extension similar
to hard point
- Connects to a construction ball and allows for 90°
rotation
6-32 SCREW
(FOR MOUNTING TO
HPB or BEX)
.500 DIAMETER
CONSTRUCTION BALL
REFERENCE
NOT INCLUDED
C/L B-BALL
CONCAVE
RADIAL
NEST
THIS SIDE
CONICAL NEST THIS SIDE
576 130
Tooling Ball 0.5”, Ball Ø 0.5000”, Shank Ø 0.2500”
.5000 DIAMETER BALL
.5000 +/-.0005
+.0000
.2500 - .0005
49
640
opt. opt. opt.
Universal CMM Accessories
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
576 118
Liner Bushing, Shank Ø 10mm
640
opt. opt. opt.
576 119
Liner Bushing, Shank Ø 12mm
640
opt. opt. opt.
576 120
Liner Bushing, Shank Ø 0.3750”
640
opt. opt. opt.
576 121
Liner Bushing, Shank Ø 0.5000”
640
opt. opt. opt.
640
opt. opt. opt.
- Adapts standard 0.2500” shank to holes of other
diameter
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
.2000 +/-.0005
.45
+.0003
.2500 -. 0000
576 122
“A”
+.0000
-. 0005
Foundation Target Insert
- Mounts to concrete floor foundations for permanent
targeting reference
SLIP FIT
REMOVABLE BRASS CAP
OPTICAL TARGET
(REFERENCE)
.2500
HOLE
7/8"
1/4"
10/32 X 1"
FLAT HEAD
SOCKET HEAD
CAP SCREW
AIR HOLE
RETAINER
1-1/4"
SEALED PLUG
10-32 TAP
BRASS
MEDIUM KNURL
1.0
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
50
Universal CMM Accessories
576 131
Double Vector for TBR, Shank Ø 0.2500”
640
LTD840
Pos.
LTD709
Description
LTD640
Article No.
opt. opt. opt.
- Holds two 0.5” reflectors on centreline and critical
offsets to represent the centreline and direction of a
hole
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
.5000 DIAMETER SMR
REFERENCE
2 PLACES
1.5625 +/-.0005
.3125
+/-.0005
640
+.0000
"A" DIA. - .0005
.5000 DIAMETER SPHERES ON CENTERLINE
OF "A" DIAMETER WITHIN + /-.0005
576 132
90 Degree Adaptor, Offset 0.5000”, Shaft Ø 0.25”
- Represents the same centreline and height as a 0.5”
tooling ball.
- Accepts a hidden point bar assembly
- Needed to project a 90° to a point that is obstructed
from view
- Centring and height tolerance within 0.0127mm
(0.0005”)
- Steel with black oxide finish
51
640
opt. opt. opt.
Universal CMM Accessories
576 133
Sphere Hidden Point Adaptor 1.5”
640
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
opt. opt. opt.
- Accepts a bar extension or other 0.25” Shank
- Allows for hidden point or sphere fit routine in 1.5”
support that is hidden from view
- Height tolerance within 0.0127mm (0.0005”)
- Ball shape to +0.0/-0.0127mm (0.0005”)
- Steel with black oxide finish
1.5 SPHERE +.0000/-.0005
420 STAINLESS STEEL
HARDENED TO R/C 53-55
6-32 TAPPED HOLE
(2) PLACES
.7500 +/-.0005
NYLON
SET SCREW
576 123
Leica Hidden Point Bar Kit for TBR (USA)
640
L
opt. opt. opt.
640
L
opt. opt. opt.
640
L
opt. opt. opt.
consisting of: 576110, 576109, 576108, 576138,
576139, 576140, 576115, 576116, 576114, 4x
576117, 576129, 576132, 576127, 576133, 576103,
576130, 1 lot of Assembly Screws
576 124
Leica Hidden Point Bar Kit for TBR (EURO)
consisting of: 576110, 576109, 576108, 576111,
576112, 576113, 576115, 576116, 576114, 4x
576117, 576129, 576132, 576127, 576133, 576103,
576130, 1 lot of Assembly Screws
576 125
Leica Laser Tracker - Reflector Holder Kit (USA)
consisting of: 576110, 576109, 576130, 576117,
576116, 576120, 576121, 576135, 576136, 576137,
576131, 576064, 576065, 576098, 2x 576134, 6x
576101, 1 lot of Assembly Screws
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
52
Universal CMM Accessories
576 126
Leica Laser Tracker - Reflector Holder Kit (EURO)
LTD840
Pos.
LTD709
Description
LTD640
Article No.
640
L
opt. opt. opt.
651
L
opt. opt. opt.
652
L
opt. opt. opt.
consisting of: 576110, 576109, 576130, 576117,
576116, 576118, 576119, 2x 576134, 3x 576101,
576064, 576077, 576075, 576097, 1 lot of Assembly
Screws
Compensation and Field Check Tools
A regular field check plus compensation will keep your
system in a perfect condition and will provide a performance to specification.
575 479
Compensation Set for 75mm Reflectors (Cateye), comprising:
575 415 Precision ball bar, motorized,
2x 803728 Magnetic Reflector Support
575 090 Adapter to ball bar
575 480
Compensation Set for 1.5” Red Ring Reflectors (Corner
cube), comprising:
575 415 Precision ball bar, motorized,
2x 804 011 Magnetic reflector Support,
575 090 Adapter to ball bar
575 415
Precision ball bar, motorized,
653
opt. opt. opt.
654
opt. opt. opt.
655
opt. opt. opt.
656
opt. opt. opt.
with counter weight, without reflector support.
575 090
Adapter to ball bar for tripods with 5/8” thread.
Allows to mount a ball bar and a magnetic reflector
carrier on a tripod, (ball bar and reflector carrier are
not included).
575 836
IFM distance tool
To re-determine the birdbath distance for TBR and 1.5”
CCR reflectors, 12mm bore holes for reflector supports
(supports not included).
575 837
Tripod adapter
To be used for various alignment or compensation
measurements. Thread for tripod 5/8”. Bore hole 12mm
(supports not included)
- Tripod reflector holder for consistent reference point
53
Universal CMM Accessories
575 484
Aluminum tripod AT28,
LTD840
Pos.
LTD709
Leica Laser
Tracker Accessories
Catalog
Description
LTD640
Article No.
661
opt. opt. opt.
662
opt. opt. opt.
with adjustable centre column. Robust, well-established
tripod for general use and 5/8 thread. Suitable for Total
Stations, Theodolites and laser tracker field check
equipment. Instrument height from 1.4 –2.8m (4.6 –
9.2 ft), weight 12kg (26.4 lb)
575 483
Aluminum tripod AT21,
with adjustable centre column. Robust, well-established
tripod for general use and 5/8 thread. Suitable for Total
Stations, Theodolites and laser tracker field check
equipment. . Instrument height from 1.4 –2.1m (4.6 –
6.9 ft), weight 11kg (24.2 lb)
574 550
Reference tool invar
665
opt. opt. opt.
804 011
Magnetic Reflector Holder
666
opt. opt. opt.
666
opt. opt. opt.
for reflectors in spherical housings, ø 1.5” with bolt
hole for 575 497
803 728
Magnetic Reflector Holder,
for reflectors in spherical housings, ø 75mm with bolt
hole for 575 497and 575 599.
- Tripod reflector holder for consistent reference point
L = Set · S = System · E = Spare part · Std. = Standard delivery · Opt. = Option
54
Universal CMM Accessories
LTD840
Pos.
LTD709
Description
LTD640
Article No.
Shipping Container and Measuring Cart
Both cars and shipping container will provide best
stowage and transport facilities – no matter where the
equipment need to travel to
575 995
Measurement Cart
701
opt. opt. opt.
702
opt. opt.
703
opt. opt.
704
opt. opt. opt.
rack mounting for a fix installation of controllers,UPS
and high speed computer. This cart can be used like
the regular measuring cart and in addition it can be
reconfigured to shuttle cart.
L =1.20m, W = 0.70m, H = 1.10m
576 045
Optional upgrade of measuring cart (757937)
to use with T-Scan system.
The measuring cart 575937 have to be upgraded when
it will be used with T-Scan system
- Ventilator to cool the cart
- Cover plate with integrated plugs
- Adapter to mount Laser Power Supply Unit
576 046
T-Scan measuring cart (rack-size)
Small 19 rack with wheels, 18 HE height to mount:
LTC plus, Cover plate for cable connection, Laser power
supply, T-Scan Controller, High speed computer and
UPS
575 939
Shipping container for tracker accessories.
For Tracker with LTC base/plus
55
Industrial Theodolites
& Total Stations
Remote Control System RCS
Radio Link & Remote Control . . . . . . . . . . . . . . . 58
Remote Control System . . . . . . . . . . . . . . . . . . . 59
Specifications RCS1100 Remote Control Unit . . . 60
Memory Cards and Readers
Off-line link via PCMCIA
(DCP05 & Axyz-CDM) . . . . . . . . . . . . . . . . . . . . . 61
North-Finding Gyroscopes
Specifications Gyromat 2000 . . . . . . . . . . . . . . . 68
Diode Laser DL2 . . . . . . . . . . . . . . . . . . . . . . . . 69
Specifications DL2 Diode Laser Pointer . . . . . . . 70
External Intensity Controller
for all Types of Instruments . . . . . . . . . . . . . . 71
Internal Intensity controller
Accessories, Cables and PC-Interfaces
Cables - On-line link to application PC . . . . . . . . 62
Cables - DL2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
for TDM5005 and TDA5005 only . . . . . . . . . . . . 71
DL2 Compatible Reticules . . . . . . . . . . . . . . . . . 71
Cables - Remote Control System . . . . . . . . . . . . 64
Target Equipment
Targets for Multi-Theodolites Systems . . . . . . . . 73
Reflectors for Total Stations . . . . . . . . . . . . . . . 74
Power Supplies and Batteries
Mains Power Supply . . . . . . . . . . . . . . . . . . . . . . 65
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Battery Chargers . . . . . . . . . . . . . . . . . . . . . . . . 65
Optical Accessories for
Instrumental Telescope
Internal Targets . . . . . . . . . . . . . . . . . . . . . . . . . 66
Eyepieces and Filters . . . . . . . . . . . . . . . . . . . . . 66
Autocollimation Accessories . . . . . . . . . . . . . . 67
56
Specifications for Reflectors . . .
1. Retro Reflective Tape Targets
2. Prism Reflectors . . . . . . . . . . .
3. Corner Cube Reflectors . . . . .
4. 360° Reflectors . . . . . . . . . . .
Tribrach . . . . . . . . . . . . . . . . . . .
Aluminum Tripods . . . . . . . . . . .
Wooden Tripods . . . . . . . . . . . . .
Translation Stages . . . . . . . . . . .
Meteo Station & Accessories . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
74
75
78
79
79
79
80
80
81
81
Radio Link & Remote Control System RCS
Configuration with wireless radio modem
and registration via remote control.
Applied for
- Radio modem for communication range >20m
- RFcontrol to allow single operator and record
from point of interest
575 757
Wireless RF Control (EU version)
opt. opt.
Australia, EU, Czech Republic, Hungary, Malaysia, Mexico, New
Zealand, Norway, Philippines, Poland, Russia, Switzerland,
Thailand (Radio Frequency: 40Mhz, Plugs into a USB port on a
Windows computer. Incl. CD with drivers and templates for
Axyz, Metrolog XG and emScon.
575 781
Wireless RF Control (US version)
US, Brazil, Canada, Israel (Radio Frequency: 49Mhz, Plugs into a
USB port on a Windows computer)Incl. CD with drivers and templates for Axyz, Metrolog XG and emScon.
Std. = Standard delivery · Opt. = Option
58
opt. opt.
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
663 288
TCPS26B base radio modem, with antenna, software diskette
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
opt. opt. opt.
and carrier for instrument
663 289
TCPS26R remote radio modem,
opt. opt. opt.
with antenna, software diskette and carrier for PC (RS232)
667 085
Transport container for TCPS26 radio modem
opt. opt. opt.
Configuration with control unit with 1:1 instrument user interface
Truly single-operator system
Fits to TDA5005 with onboard software (i.e. offline mode)
Applied for
- Measurement control from point of interest
- Large part inspection & assembly
667 380
RCS1100 Standard Set comprising:
RCS1100 controller with radio module/antenna, holder, soft
bag, user manual, 1 TCPS26B base radio modem, 1 short Ycable, 1 Lemo 0 - RS232 adapter.
Not included: external battery GEB70/71 for TCPS26B, battery
GEB111 with charger GKL111
59
opt.
667 381
RCS1100 Advanced Set comprising:
RCS1100 controller with radio module/antenna, holder, user
manual, 1 TCPS26B base radio modem, 1 short Y-cable, 1 Lemo
0 - RS232 adapter, 1 GEB 111 battery, 1 GKL 111 charger,
2 Antenna holder, 1 cont
Not included: external battery GEB70/71 for TCPS26B
Specifications RCS1100 Remore Control Unit
Verify with Leica Geosystems Metrology if RCS1100 is approved in your country
Method
Transmission
via integrated Radio Modem
Frequency spectrum
2’447 - 2’483 MHz
adjustable by manufacturer
High frequency power (ERP)
100 mW
Dimensions & Weight
Weight w/o battery
0.77 kg
Ambient Conditions
Operating range
up to 600 m (2’000 ft) under
average conditions
Operating temperature
-20°C to + 50°C (-4°F to 122°F)
Storage temperature
-40°C to + 70°C (-40°F to 158°F)
Dust/Water (IEC 60529)
IP54
Humidity
0-95%, non condensing
Std. = Standard delivery · Opt. = Option
60
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
opt.
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
Memory Cards and Readers
Off-line link via PCMCIA card (DCP05 & Axyz-CDM)
639 948
PCMCIA SRAM memory card, 512 KB
opt. opt. opt.
(approx. 4,500 data blocks)
639 949
PCMCIA SRAM memory card, 2 MB
opt. opt. opt.
(approx. 18,000 data blocks)
743 119
MCR6 USB card reader
opt. opt. opt.
As an alternative, the operator may also transfer data via serial
interface using LGO Tools
61
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
Accessories, Cables and PC Interfaces
Cables – On-line link to application PC
Configuration for single instrument, powered with internal battery
734 700
Data cable GEV189, 2m,
opt. opt. opt.
connects instrument with USB for serial communication (incl.
USB electronics); PC driver and user manual included on CD
563 625
Data transfer cable GEV102, 2m,
opt. opt. opt.
connects instrument and RS232 interface
574 948
Data transfer cable 10m,
opt. opt. opt.
connects instrument and RS232 interface
Configuration for single instrument, powered with external battery/mains
Std. = Standard delivery · Opt. = Option
62
409 684
Y-cable GEV58, long, (Lemo 0, Lemo 0, Lemo 1)
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
opt. opt. opt.
connects instrument with external power supply T_LINK/GEV208
or battery GEB70/171 and PC (requires additional connector
707 525) or radio link TCPS26B
707 525
Lemo 0 - RS232 adapter (9pin female) for 409 684 and 707 135
opt. opt. opt.
Configuration for multiple instrument, powered with mains
527 497
Data cable GEV86, 20 m, connects instrument with external
opt. opt. opt.
power supply T-LINK/GEV208 or battery GEB70/171
409 678
Data cable GEV52, 1.8m, connects instrument or intensity
opt. opt. opt.
regulator DL2 with external power supply T-LINK/GEV208 or
battery GEB70/171
575 819
Moxa C104 H/PCI, 4xRS232, for Desktop PC's (for up to 4
opt. opt. opt.
instruments online), including RS232 9F gender changer.
800 497
Cable spool for 20m/40m cables
opt. opt. opt.
Cables - DL2
574 834
Cable, 1m,connects DL2 and intensity regulator
407 678
Cable GEV63, 1.2m, connects instrument with DL2
intensity regulator
63
opt. opt. opt.
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
Cables - Remote Control System
409 684
Y-cable GEV58, long, (Lemo 0, Lemo 0, Lemo 1)
opt. opt. opt.
connects instrument with external power supply T_LINK/GEV208
or battery GEB70/171 and PC (requires additional connector
707 525) or radio link TCPS26B
707 135
Y-cable GEV137, short, (Lemo 0, Lemo 0, Lemo 1)
opt. opt. opt.
connects instrument with external power supply T_LINK/GEV208
or battery GEB70/171 and PC (requires additional connector
707 525) or radio link TCPS26B
707 525
Lemo 0 – RS232 adapter (9pin female) for 409 684 and 707 135
Std. = Standard delivery · Opt. = Option
64
opt. opt. opt.
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
Power Supplies and Batteries
Power Supply Units
575 427
Interface T_LINK (max. total 8 instruments)
opt opt. opt.
Power supply unit for TPS, for indoor use only. Input 94-265VAC
to output 12VDC
749 279
GEV208, Power supply unit for TPS/GPS, for indoor use only; input
opt. opt. opt.
100-240VAC to output 12VDC, with connection for power cables
Batteries
667 123
Camcorder battery GEB121,
opt. opt. opt.
nickel-metal-hydride (Ni-MH), 6V/4.2Ah (for RCS1100).
667 147
Internal battery GEB187, plug-in, nickel-metal-hydride, (Ni-MH),
opt. opt. opt.
1.8Ah.
402 210
Small external battery GEB70, 12V 2Ah NiCd, rechargeable
opt. opt. opt.
727 367
External battery GEB171, 12V 8Ah, Ni-MH, rechargeable
opt. opt. opt.
Battery Chargers
636 983
Charger GKL22, 230V, 50/60Hz, Euro-type plug, charges one
opt. opt. opt.
battery GEB87, GEB187 or GEB70, normal charge 14 hours
639 959
Simple charger GKL22-1,
opt. opt. opt.
same as GKL22 but with 115 V, 50/60 Hz, and US -type plug
734 753
GKL112, Charger BASIC, for Ni-MH batteries GEB121 and
opt. opt. opt.
GEB111, car adapter cable and net adapter included
733 271
GKL221, Charger PRO. To be used with up to two charging adapters
GDI221 or GDI222, Charger cable and net adapter included
65
opt. opt. opt.
733 322
GDI222, Adapter for GKL221 for charging Ni-MH batteries of type
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
opt. opt. opt.
GEB121, GEB111,, charger cable included for GEB87, GEB187,
GEB77, GEB79, GEB70, GEB71, GEB171 or adapter plate GDI121.
Optical Accesories for Instrumental Telescope
Internal Targets
433 472
Internal target GUS29 for collimation measurements;
opt.
factory fit to T3000(A) and TM5100A
Eyepieces & Filters
377 802
Eyepiece FOK53, 44x magnification at 10m / 30ft
opt. opt. opt.
(fitted in service-shop)
743 504
GVO13 objective sun-filter
734 514
GFZ3 Diagonal eyepiece for telescope, except T100
opt. opt.
376 236
Eyepiece GOK6 for steep sights up to 72°, rotatable in vertical
opt. opt.
opt. opt. opt.
plane
712 504
Counterweight for TM5100(A) and T3000(A)
opt.
if steep angle eyepiece GOK6 is attached
632 364
GDV3 short range lens for retro targets in container (only
std. std.
replacement, as included in standard delivery of TPS5000 total
stations, a re-issue of the certificate M distances is necessary
with any new additional lens!)
575 873
AP31 aperture (diam = 31mm) for use with TDM/TDA5005 and
CCR 1.5” (575 875)
Std. = Standard delivery · Opt. = Option
66
opt. std.
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
Autocollimation Accessories
199 899
Autocollimation eyepiece
opt. opt.
394 787
Plug-in lamp, with cable to battery.
opt. opt.
394 792
Battery box GEB63
opt. opt.
for autocollimation eyepiece, without 9V battery
575 725
AL51 plug-in lamp for TM5100A only
opt.
392 368
Autocollimation mirror GAS1, ø 50mm, in case
opt. opt. opt.
67
Article No.
Leica Industrial
Theodolites &
Total Stations Catalog
Description
Industrial Theodolites &
Total Stations Accessories
North Finding Gyroscopes
Fully automatic precision surveying gyroscope
for north finding measurements
Applied for
- Precision directional measurements, where GPS is inaccessible e.g.
- Naval shipbuilding
- Tunnelling
- Please ask for separate information on Gyromat 2000
by DMT/Germany
Specifications Gyromat 2000 by DMT/Germany
Accuracy
Measuring mode
1
3
Measuring accuracy
3” (1 mgon)
16” (5 mgon)
32” (10 mgon)
Measuring time (apx.)
10 min.
5 min.
2 min.
No. of measurements
20
30
40
Ambient Conditions
Operating range
up to 80° latitude
Operating temperature
-20°C to + 50°C (-4°F to 122°F)
Dimensions & Weight
Weight w/o instrument
11 kg
Height w/o instrument
215 mm
Tripod
8 kg
1’000 mm
Std. = Standard delivery · Opt. = Option
68
2
Article No.
Description
Industrial Theodolites &
Total Stations Accessories
Diode Laser DL2
Visualizes the line-of-sight by truly non contact means
Applied for
- Marking points
- Digitizing
- Setting-out points by design values
- Positioning and alignment
- Locating reflectors in remote control mode
Configuration for DL2 & instrument power supply via external battery
Configuration for DL2 & instrument power supply via interface T_LINK
69
574 822
Diode Laser Eyepiece DL2 with manual, in case
opt. opt. opt.
Specifications DL2 Diode Laser Pointer
Ambient Conditions
Operating temperature
-10°C to + 35°C (-14°F to 95°F)
Storage temperature
-40°C to + 60°C (-40°F to 140°F)
Humidity
0-95%, non condensing
Optic specifications
Power output at objective
< 1 mW
Safety
Class 2 Laser Product in accordance with:
IEC 60825-1 (2001-08):
“Safety of Laser Products” resp.
EN 60825-1: 1994 + A11: 1996 + A2: 2001
“Safety of Laser Products”
Class 2 Laser Products
Do not stare into the beam or direct
it unnecessarily at other persons
Eye protection
Integral laser retaining film on beam splitter
Range on daylight
about 140 m (460 ft)
Range in darkness
about 400 m (1’300 ft)
Laser source
Laser Diode
Wavelength
635 mm
Dimensions
Laser eyepiece with housing
38 x 58 x 25 mm
Intensity regulator
98 x 65 x 58 mm
Tilt angle of telescope
depending on instrument type
(varies with position of DL2)
Weight
723 231
DL2
0.07 kg
Laser Radiation
Do not stare into beam
Intensity regulator
0.27 kg
Pο ≤ 0.95 mW
λ = 620 - 690 nm
Counterweight for TM5100(A) and T3000(A)
if diode laser DL2/3 is attached
Std. = Standard delivery · Opt. = Option
70
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
Class 2 Laser Product
according to IEC
opt.
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
External Intensity Controller for all Types of Instruments
574 835
Intensity regulator
opt. opt. opt.
574 834
Cable, 1m,
opt. opt. opt.
connects DL2 and intensity regulator
407 678
Cable GEV63, 1.2m,
opt. opt. opt.
connects instrument with DL2 intensity regulator
575 498
Tripod bracket in order to attach accessories (battery, DL2
opt. opt. opt.
intensity regulator, Radio Modem) to AT21/28 tripods
409 678
Data cable GEV52, 1.8m,
opt. opt. opt.
connects instrument or intensity regulator DL2 with external
power supply T-LINK/GEV208 or battery GEB70/171
527 497
Data cable GEV86, 20 m,
opt. opt. opt.
connects instrument with external power supply T-LINK/GEV208
or battery GEB70/171
Internal intensity controller for TDM5005 and TDA5005 only
573 447
Conversion kit DL2
opt. opt.
comprising: DM cover (IMS grey) with cable socket and indicating
diode, adapter cable between DM - cover and DL2; factory fitted
DL2 Compatible Reticules
376 555
Reticule GSTP2 for T2002, TPS100 old, TPS1000, TPS5000 with
central opening. Retro fit to TM/TDM/5000, TM/TDM/TDA5005
71
opt. opt.
575 691
Industrial reticule GSTP24
std. std.
with concentric circles and central opening for DL2/3; retro fit
to T/TC2002, TM/TDM5000
575 692
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
Industrial reticule GSTP25
std.
with concentric circles and central opening for DL2/3; retro fit
to T3000(A)
Std. = Standard delivery · Opt. = Option
72
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
Target Equipment
Targets for Multi-Theodolites Systems
800 742
Scale bar 0,9m,
opt. opt. opt.
carbon fibre, incl. Producer Inspection Certificate, in carrying case.
574 681
Orientation Target (magnetic)
opt. opt. opt.
571 549
Self-adhesive target foils,
opt. opt. opt.
black/white, ø 23mm, 48 pieces on one sheet
800 805
Magnetic corner target, ø 30mm, 10mm high
Note: By sting a ring shaped target (e.g. 575 271) onto this
target, it makes a total station target
73
opt. opt. opt.
Article No.
Leica Industrial
Theodolites &
Total Stations Catalog
Description
Industrial Theodolites &
Total Stations Accessories
Reflectors for Total Stations
1) Retro-reflective tape targets for industrial applications
2) Prism reflectors for typical survey applications
3) Corner Cube Reflector for precision measurements
4) 360° Reflector for tracking applications
Specifications for Reflectors
Type
Add.
Accept.
Typ.
Typ.
Constant
Angle
Accur.
Range
35.5 mm1)
Hz ± 10°
V ± 20°
0.2 mm2)
0.3 mm4)
<600 m (2’000 ft)
20 x 20 mm
34.4 mm1)
± 42°
0.5 mm2)
<60 m (200 ft)
40 x 40 mm
34.4 mm1)
± 42°
0.5 mm2)
20-120 m (65-400 ft)
60 x 60 mm
1)
± 42°
2)
0.5 mm
60-180 m (200-600 ft)
Corner Cube Reflector
CCR 1.5”
Tape Targets
34.4 mm
Surveying Prisms
Prec. Prism
GPH1P
0 mm
± 30°
0.3 mm2)
<2’500 m (8’200 ft)
Miniprism
GMP101
17.5 mm
± 30°
0.5 mm
<1’000 m (3’300 ft)
GRZ121
23.1 mm
Hz 360°
V ± 27°
2 mm4)
<1’300 m (4’300 ft)
Miniprism
GRZ101
30.0 mm
Hz 360°
V ± 27°
1.5 mm4)
<500 m (1’650 ft)
360° Prisms
1) Each TDM5005 and TDA5005 comes with Producer Inspection Certificate (in accordance with
ISO17123), that states the individual offset. 2) 1 sigma distance measuring accuracy (in accordance
with ISO17123). 3) Under average conditions with a single reflector in manual measurement mode.
4) Point accuracy (1 sigma)
Std. = Standard delivery · Opt. = Option
74
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
1) Retro Reflective Tape Targets
Inexpensive tape targets available in different design and size
Applied for
- Standard applications
- Manual measurements
574 999
Hidden point bar 0.5m, with tape targets
opt. opt.
573 487
Magnetic support for hidden point bar, 0.5m
opt. opt.
635 317
Retro targets, 20x20mm,
opt. opt.
20 pieces, self-adhesive (avg. range 2-60m)
635 318
Retro targets, 40x40mm,
opt. opt.
20 pieces, self-adhesive (avg. range 20-120m)
635 319
Retro targets, 60x60mm,
opt. opt.
20 pieces, self-adhesive (avg. range 60-180m)
575 271
Ring shaped retro target, 100 pieces,
opt. opt.
ø central aperture = 5mm, ø outside = 26mm,
light orange, self-adhesive (avg. range up to 50m)
574 998
Target-kit with retro-target on magnetic target, in case, comprising:
opt. opt.
20 ring-shaped retro-target, central aperture
ø 5mm, outside ø 26mm (575 271),
20x retro-target, 20x20mm (635 317)
20x retro-target, 40x40mm (635 318),
4x RB bases (575 776),
1x RBC base (575 777),
4x RT3-90 targets (575 773),
4x RT3-45 targets (575 774),
4x RT3-0 targets (575 775).
575 088
Pass point-retro target set, in case, comprising:
3 swivel targets with retro reflective foils, ø45mm, h=75mm,
3 magnetic bases
75
opt. opt.
575 940
Roller Alignment target fixture, comprising
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
opt. opt.
2 pcs. Floor fixtures
1 pce. Roller fixture
2 pcs. RT3-90 targets (575 773),
2 pcs. RT3-45 targets (575 774),
excl. CCR1.5 reflector (575 875) and CCR1.5 supports (576076)
575 101
Retro target, magnetic, 10 pcs.,
opt. opt.
format 40x40x1mm, (20-120m).
575 773
RT3-90,
opt. opt.
Tape target with offset 30mm ± 0.05mm, magnetic. Fits to target base RB and RBC
575 774
RT3-45,
opt. opt.
Tape target with offset 30mm ±0.05mm, magnetic,
fits to target RB and RBC
575 775
RT3-0,
opt. opt.
Tape target with offset 30mm ±0.05mm, magnetic,
fits to target base RB and RBC
575 776
RB,
opt. opt.
Magnetic target base with offset 10mm ±0.05mm, magnetic,
fits to tape targets RT3
Std. = Standard delivery · Opt. = Option
76
575 777
RBC,
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
opt. opt.
Magnetic target base with offset 10mm ±0.05mm, fits to tape
targets RT3, with central bolt hole and locating pin
77
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
2) Prism Reflectors
Glass prism targets for surveying applications
Available in different size and centring accuracy
Applied for
- Standard applications with fixed target locations
- Automatic measurements
- Surveying applications
For a wider range of prism supports, please ask your Leica
representative or download Catalogue from
http://downloads.leica-geosystems.com/
downloads/areas/zz/construction/accessories/index.htm
362 830
Circular prism GPR1 (avg. range up to 2,500m)
opt. opt.
362 820
Single prism holder GPH1 for GPR1
opt. opt.
641 662
Mini-prism set GMP101 (avg. range up to 1,000m)
opt. opt.
Set with bubble, spike and bag
555 631
Single prism precision reflector GPH1P
(avg. range up to 2500m)
Std. = Standard delivery · Opt. = Option
78
opt. opt.
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
3) Corner Cube Reflectors
Air path corner cube in black (swoxed) spherical housing
Replacement program for broken reflectors available
Applied for
- Precision measurements
- Automatic measurements
- Fully compatible with Leica Laser Tracker
575 875
Reflector CCR 1.5, swoxed (avg. range up to 600m)
opt. opt.
For wide range of supports, please consult Laser Tracker section
4) 360° Reflectors
Glass prism targets for surveying applications
Available in different size and centring accuracy
Applied for
- Automatic tracking measurements in Step-and-Go mode
For a wider range of prism supports, please ask your Leica
representative or download Catalogue from
http://downloads.leica-geosystems.com/
downloads/areas/zz/construction/accessories/index.htm
667 399
360° prism reflector GZR121
opt.
(avg. range up to 1,300m) for typical use with TDA5005 in
tracking mode with low accuracy requirements
Tribrach
575 459
GDF21-I, industrial tribrach, without optical plummet, light grey
opt. opt. opt.
575 733
GDF22-I, industrial tribrach with optical, plummet, light grey
opt. opt. opt.
79
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Leica Industrial
Theodolites &
Total Stations Catalog
Description
TM5100A
Article No.
Aluminum Tripods
575 483
Aluminum tripod AT21,
opt. opt. opt.
with adjustable centre column. Robust, well-established tripod
for general use and 5/8 thread. Suitable for Total Stations,
Theodolites and laser tracker field check equipment. .
Instrument height from 1.4 –2.1m (4.6 – 6.9 ft), weight 11kg
(24.2 lb)
575 484
Aluminum tripod AT28,
opt. opt. opt.
with adjustable centre column. Robust, well-established tripod
for general use and 5/8 thread. Suitable for Total Stations,
Theodolites and laser tracker field check equipment. Instrument
height from 1.4 –2.8m (4.6 – 9.2 ft), weight 12kg (26.4 lb)
575 498
Tripod bracket in order to attach accessories (battery, DL2
opt. opt. opt.
intensity regulator, Radio Modem) to AT21/28 tripods.
Wooden Tripods
296 632
Tripod GST20, telescopic, with accessories. Robust, well-estab-
opt. opt. opt.
lished tripod for general use. Suitable for levels, lasers, Total
Stations and GPS. Extendible 180cm (5.9ft), weight 6.4kg
(14.1lb)
332 200
Tripod base GST4, for setting up GST tripods on smooth surfaces
Std. = Standard delivery · Opt. = Option
80
opt. opt. opt.
TDA5005
Industrial Theodolites &
Total Stations Accessories
TDM5005
Description
TM5100A
Article No.
Translation Stages
Precision translation stage to shift instrument along axis
Applied to
- Alignment to references
- Alignment of instruments and/or targets
1st GMT5 shifts in single direction; a 2nd translation stage is
required for orthogonal shifts
417 677
Measuring slide GMT5 (single direction)
opt. opt. opt.
with maximum working range 40mm; least count 0.01mm.
417 678
GAD12 Adapter set for mounting GMT5
opt. opt. opt.
translation stage onto any Leica tribrach; includes tribrach to
mount instrument; typical adapter set for theodolites and total
stations.
417 679
GAD13 Adapter set for mounting GMT5
opt. opt. opt.
translation stage onto 5/8 thread; includes adapter plate with
5/8 thread to mount instruments; typical adapter set for levels.
Meteo Stations & Accessories
The most precise sensor to monitor and correct the atmospheric conditions. It is an essential accessory for any precision
measurements.
575 734
Set Meteo Station HM30 with integrated pressure sensor,
comprising:
Meteo Station HM30, RS232 cable, 9pole female, 1.5m.
Combo-sensor for humidity/temperature with cable 3m.
Power supply 100-240VAC/9VD/1150mA with universal plugs
for Europe, UK, USA/Japan
For wide range of accessories, please consult Laser Tracker section
81
opt. opt.
Whether building the fastest car, the biggest plane, or the most
precise tooling, you need exact measurements to improve quality
and productivity. So when it has to be right, professionals trust
Leica Geosystems Metrology to help collect, analyze, and present
3-dimensional (3D) data for industrial measurement.
Leica Geosystems Metrology is best known for its broad array of control and industrial measurement products including laser trackers,
Local Positioning Technology (LPT) based systems, hand-held
scanners, 3D software and high-precision total stations. Those who
use Leica Metrology products every day trust them for their dependability, the value they deliver, and the world-class service & support
that's second to none.
Precision, reliability and service from Leica Geosystems Metrology.
When it has to be right.
751789
© 2006 – Copyright Leica Geosystems AG, Unterentfelden, Switzerland
2.06. Printed in Switzerland.
Leica Geosystems AG
Moenchmattweg 5
CH-5035 Unterentfelden
Switzerland
Phone +41 62 737 67 67
info.metrology@leica-geosystems.com
www.leica-geosystems.com/metrology
- when it has to be right
A technological company
- Instop, S.L.U. es desde el año 1997 el proveedor de soluciones globales en el
campo de la topografía para todos los profesionales de nuestro país
- www.instop.es es el primer portal en la red y la mas completa pagina web dedicada al mundo de la topografía y la construcción
- Somos una empresa dinámica dedicada al servicio personalizado al cliente
- Instop es el distribuidor mas importante de Leica Geosystems en nuestro país.
- Somos la primera empresa del sector en alquiler de maquinaria para topografía.
INSTOP S.L.U.
C/ Narcís Monturiol, 14
Pol. Ind. Plans d’Arau
08787 La Pobla de Claramunt - Barcelona
Tel.
+34 902 93 02 82
Fax
+34 93 805 55 98
www.instop.es