ARCHITECTURAL LED
6" Architectural LED Downlight
ORDER MATRIX Example: C118-AL6
A
B
A
C
D
E
Description
F
G
Series
C118-AL6 6" Architectural Downlight
LED
B
Input Voltage
120V
277
U
C
Cree
Citizen
Epistar
Seoul
Osram
D
277V
120-277V
LED Available
Reflector
Cree
Citizen
Epistar
Seoul
Osram
¾ High quality reflector with 1.2mm thickness
¾ Optional painted white flange is available
Reflector Assembly
¾ Reflector easily wires to dedicated frame
with locking quick connect
LED Module
Dimmable
¾
¾
¾
¾
¾
Non-Dimmable
DM
E
L16
L25
L37
F
Dimmable
Wattage
16W
25W
37W
3000K
40K
50K
4000K
5000K
G
EM
C-Channel Bar Hanger
F
Flat Bar Hanger
H
Wood Joist Bar Hanger
B
A
SF
SFW
C
Input Power
16W (+/- 5%)
25W (+/- 5%)
37W (+/- 5%)
Emergency Backup
C
A
¾ Thermal protection guard protects the LED
module from overheating and will dim LED
module if necessary
¾ PF>0.9
¾ Fully dimmable down to 10% of initial light
output with a 0-10 Volt dimmer.
Options
Reflector Matrix
Cree true white® technology available
CRI>80%
Color temperature: 3000K-5000K
Rated for 50000 hours at 70% lumen output
No heat, mercury or UV
Electrical System
Color Temperature
30K
¾ Lighting is smooth and comfortable while
using 50% less energy than the common
CFL downlight.
¾ Eco-friendly no lead or mercury
¾ Designed to install into an existing
downlights mounting frame and convert
them into energy efficient LED downlights
to save anywhere from 35% up to 75% on
energy cost.
¾ Ideal suited for use in commercial, retail and
other architectural applications
¾ Available with dedicated Emergency Battery
Back-up
Listing
Lumens
1250LM
2000LM
3000LM
¾ ETL listed for damp location W/Feed through
Frame
¾ Constructed from 16-gauge steel, dieformed construction for max heat dissipation
and rust protection.
Clearance
¾ Frames require a minimum clearance of 3”
ring from thermal insulation and 1/2” from
adjacent building component.
Mounting
¾ Designed to install into an existing
downlights mounting frame and convert
them into energy efficient LED downlights.
¾ Flex is designed to attach into existing
junction box.
¾ Vertically adjustable universal mounting
brackets accept flat bar hangers, conduit or
C-channel
¾ The reflector assembly is held in with 4
“butter-fly” spring clips.
¾ Reflector assy quickly attaches with lockable
quick connect. Hanger bars ordered
separately.
¾ Compatible with C-channel, flat bar wood
joist bar hanger and EMT
Junction Box
¾ Plaster frame integrated 29 cubic inch 0.064"
thick galvanized steel
¾ Provided with four ½" knockouts, one ¾"
knockout and four Romex knockouts with
true pryout slots and strain clamps.
¾ Designed for straight through conduit runs.
¾ Electrical connections are made through a
single junction box door.
¾ Green wire provided for installation with
ground wire fed through PVC pipe conduit.
Thermal Protector
¾ External thermal device is located on the
junction box wrap.
Driver
¾ The LED driver is mounted to the J-box
cover and is accessible from below the
ceiling.
¾ Rated for 50Hz to 60Hz at 120V/277V input
¾ Produces less than 20% THD
C
Trim
B
Reflector Finish
Self Flanged
C
Clear
HZ
Haze
White
Self Flanged White
NO Flange
WH
Lens Type
CR
Clear Tempered
SB
Sand Blasted
www.cobolight.com
1
ARCHITECTURAL LED
6" Architectural Vertical Housing
ORDER MATRIX Example: C118-A6
A
B
A
C
D
Series
C118-A6 6" Architectural Vertical Housing
B
Input Voltage
120V
277
U
C
P30
P38
A19
A21
D
277V
120-277V
Lamp
E
F
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust
protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation
¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT.
¾ Fully assembled for ease of installation
¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from
combustible material from above the fixture
Junction Box
Pre-wired junction box provided with 1/2" and 3/4" knockouts
Provided with removable access plates
Knockouts equipped with pry out slots
All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are
supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾
¾
¾
¾
PAR30
PAR38
A19
A21
Socket Cup
Wattage
Reflector
L18
L24
18W
24W
L12
L17
12W
17W
E
Mounting
Color Temperature
28K
2800K
35K
50K
65K
3500K
5000K
6500K
F
Options
C
C-channel Bar Hanger
F
H
Flat Bar Hanger
Wood Joist Bar Hanger
¾
¾
¾
¾
Adjusts vertically for optimum light performance
Die-cast fin construction for heat dissipation
Unitized optics guarantees proper trim to housing installation
Tool-less installation adjustability from either outside the housing or inside the housing
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and
types.
¾ Optional painted white flange is available
¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
Thermal Protector
¾ Meet ETL requirements
¾ Standard thermal protection device guards against improper installation, over lamping and misuse
of insulation material
¾ External thermal device located on the junction box wrap
Socket
¾ E26 medium base
Lamp
¾
¾
¾
¾
¾
¾
¾
LED PAR30 18W max.
LED PAR38 24W max.
LED A19 12W max.
LED A21 17W max.
CRI>80%
PF>0.9
Color Temperature: 2800K-6500K
Listing
¾ ETL listed for damp location W/Feed through
2
www.cobolight.com
ARCHITECTURAL LED
RV6002
RC602
RC603
6 inch Vertical Reflector
Self Flanged/White Ring
6 inch Vertical Reflector with
Regressed Lens
Self Flanged/White Ring
6 inch Vertical Baffle with
Regressed Lens
Self Flanged/White Ring
RC608
RV612
RC166
6 inch Vertical Cross Blade
White Ring
6 inch Vertical Reflector with
Baffle
White Ring
6 inch Vertical Reflector with
Drop Glass
Self Flanged
www.cobolight.com
3
ARCHITECTURAL LED
6" Architectural Vertical Remodel Housing
ORDER MATRIX Example: C118-A6R
A
B
A
C118-A6R
B
C
C
P30
P38
A19
A21
D
E
Series
6" Architectural Vertical Remodel Housing
Input Voltage
120V
277
U
D
277V
120-277V
Lamp
PAR30
PAR38
A19
A21
Wattage
Mounting
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust
protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation
¾ Fully assembled for ease of installation
¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from
combustible material from above the fixture
Junction Box
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots
and strain clamps
¾ Provided with removable access plates
¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are
supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
Socket Cup
¾
¾
¾
¾
Adjusts vertically for optimum light performance
Die-cast fin construction for heat dissipation
Unitized optics guarantees proper trim to housing installation
Tool-less installation adjustability from either outside the housing or inside the housing
Reflector
¾ High quality reflector with 1.2mm thickness available
¾ Optional painted white flange is available
L18
18W
L24
24W
L12
L17
12W
17W
¾ Meet ETL requirements
¾ Standard thermal protection device guards against improper installation, over lamping and misuse
of insulation material
¾ External thermal device located on the junction box wrap
Color Temperature
Socket
E
28K
2800K
35K
50K
65K
3500K
5000K
6500K
Thermal Protector
¾ E26 medium base
Lamp
¾
¾
¾
¾
¾
¾
¾
LED PAR30 18W max.
LED PAR38 24W max.
LED A19 12W max.
LED A21 17W max.
CRI>80%
PF>0.9
Color Temperature: 2800K-6500K
Listing
¾ ETL listed for damp location W/Feed through
4
www.cobolight.com
ARCHITECTURAL LED
RV6002
RC602
RC603
6 inch Vertical Reflector
Self Flanged/White Ring
6 inch Vertical Reflector with
Regressed Lens
Self Flanged/White Ring
6 inch Vertical Baffle with
Regressed Lens
Self Flanged/White Ring
RC608
RV612
RC166
6 inch Vertical Cross Blade
White Ring
6 inch Vertical Reflector with
Baffle
White Ring
6 inch Vertical Reflector with
Drop Glass
Self Flanged
www.cobolight.com
5
ARCHITECTURAL LED
6" Architectural Vertical Wall Washer
Housing
ORDER MATRIX Example: C118-A6W
A
B
A
C118-A6W
B
C
D
Series
6" Architectural Vertical Housing
Input Voltage
120V
277
U
C
A19
D
L12
E
277V
120-277V
Lamp
A19
E
Mounting
F
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and
rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less
installation
¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT.
¾ Fully assembled for ease of installation
¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and
1/2" from combustible material from above the fixture
Junction Box
Pre-wired junction box provided with 1/2" and 3/4" knockouts
Provided with removable access plates
Knockouts equipped with pry out slots
All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are
supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾
¾
¾
¾
Socket Cup
Adjusts vertically for optimum light performance
Die-cast fin construction for heat dissipation
Unitized optics guarantees proper trim to housing installation
Tool-less installation adjustability from either outside the housing or inside the housing
12W
¾
¾
¾
¾
Color Temperature
Reflector
Wattage
2800K
3500K
5000K
6500K
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple
architectural finishes and types.
¾ Optional painted white flange is available
¾ Single position optics eliminate possibility of specified lamp being installed in incorrect
position
F
Options
Thermal Protector
C
C-channel Bar Hanger
F
H
Flat Bar Hanger
Wood Joist Bar Hanger
28K
35K
50K
65K
¾ Meet ETL requirements
¾ Standard thermal protection device guards against improper installation, over lamping and misuse
of insulation material
¾ External thermal device located on the junction box wrap
Socket
¾ E26 medium base
Lamp
¾
¾
¾
¾
LED A19 12W max.
CRI>80%
PF>0.9
Color Temperature: 2800K-6500K
Listing
¾ ETL listed for damp location W/Feed through
6
www.cobolight.com
COMMERCIAL HOUSING
Description
¾ Housing Must be kept at least 3” away from insulation
¾ Includes adjustable hanger bars with integral nail
¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex
knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
C118-A6C
RV6002
6 inch Vertical Reflector
Self Flanged/White Ring
RC608
6 inch Vertical Cross Blade
White Ring
7
RC602
6 inch Vertical Reflector with
Regressed Lens
Self Flanged/White Ring
RV612
6 inch Vertical Reflector with
Baffle
White Ring
6" Vertical LED Commercial Recessed Housing
Lamp: PAR30 LED 18W Max.
RC603
6 inch Vertical Baffle with
Regressed Lens
Self Flanged/White Ring
RC166
6 inch Vertical Reflector with
Drop Glass
Self Flanged
www.cobolight.com