ERBI katalog_ANG_Sestava 1

advertisement
ELECTRONIC LOCKS
2016
CZECH MANUFACTURER
ERBI Systems s.r.o.
Šestajovická 488/20
CZ– 198 00 Praha 9 Hloubětín
Czech republic
Tel.: +420 281 864 582
E-mail: obchod@erbi.cz
WWW.ERBI.CZ
CZECH MANUFACTURER
CONTENTS
Electronic cabinet locks
Cabinet lock with latch
4
PIN with ejector spring
8
MINI Lock
10
Electronic Key Deposit Box
12
Entrance Mortise Locks with Self-locking Function
18
Mechanical
20
Electromechanical
21
Hotel Mortise Locks with Self-locking Function
22
Mechanical
22
Electromechanical
23
Motor-powered
24
Safe INTRALOCK with PIN
26
Up to a force of 6 000 N
27
Up to a force of 12 000 N
29
Spring Contacts for Doors
30
3
ELECTRONIC CABINET LOCKS
Intended for aquaparks, schools, banks, households etc.
Cabinet locks form part of an electromechanical locking system
performing access control functions and unauthorized
entry signalling.
4
Cabinet lock with a latch
5
ELECTRONIC CABINET LOCK
Cabinet lock with a pin
CABINET LOCK WITH LATCH
AND HANDLE
CABINET LOCK HANDLE
Handle with space for electronics
LATCH on the inner side of cabinet door.
HANDLE on the outer side of cabinet door.
HANDLE on the outer side of cabinet door.
Can be used independently.
15
Cabinet lock dimensions.
Technical specifications
Length 113 mm, width 65 mm, depth 30 mm
Latch slides out from lock by 15 mm
Locking speed 0.30 s
Minimum pressure on latch when unlocking
Motor powered 5V DC Zero consumption when idle
Motor revolutions reverse direction when polarity shifts
Mounted on the cabinet door inner side with two through bolts M6 and M10 in diameter
Resistant to break in attempts by a force of 500 N
Polyamide cover
Mounted by two attached bolts
Ordering code for black colour: SMO ZA 1
Handle cover with a light pipe for
two LED diodes.
Sample assembly of electronics and
antenna under the handle cover. To be
performed by entrance system supplier.
Technical specifications
Length 113 mm, width 65 mm, depth 30 mm
DPS space on the handle board 45 x 40 mm
Antenna space on the handle board length 57 mm, width 32 mm, depth 3mm
Locked/unlocked position indicated by red and green diode of 3 mm in diameter
Mounted on the small door outer side by two through bolts
Polyamide cover in BLACK (standard), RED, various decals
Ordering code for black colour: SMO RU 1
Ordering code for red colour: SMO RU 2
Ordering code for design colour: SMO RU 9
Delivery date for colour other than black must be agreed with the supplier
upon ordering.
Open door signalling by a switch (must be ordered separately)
Ordering code: SMO ZA JAZ KONTAKT
Full order specification upon consultation with our technician
6
7
ELECTRONIC CABINET LOCK
Latch and lock mounted onto
the cabinet door.
3
11
30
67
Lock mounted on
cabinet fixed wall.
Pin mounted on the
cabinet door. May
be used for both
right and left door.
CABINET LOCK with PIN
and ejector spring
40
67
11,5
18
4,5
30
Mounted inside of the cabinet fixed wall. Cabinet door opens automatically
as the lock releases. Handle not required.
Lock with a pin mounted on the cabinet inner side.
114
27
23
Dimensions of cabinet lock with a pin.
Technical specifications
Length 113 mm, width 65mm, depth 30 mm
Pin board length 40 mm, width 18 mm, depth 5 mm
Flat pin 18 mm long
Ejector spring opens cabinet door with force up to 50 N
Locking speed – immediately after pin slides in
Unlocking creates pressure on pin of up to 50 N
Motor powered 8-24V DC
Zero consumption when idle
Open door signalling
Lock mounted on locker inner side by two or three screws of 3.5 mm in diameter
Pin mounted on the cabinet door inner side by two screws
Resistant to break in attempts by force of 500 N
Polyamide cover
Ordering code for black colour: SMO PIN 1
Ordering code SMO RU1
Ordering code SMO RU93
8
Ordering code SMO RU2
Ordering code SMO RU92
Ordering code SMO RU91
9
ELECTRONIC CABINET LOCK
Cabinet lock with a pin in black colour.
CABINET LOCK MINI with PIN
The smallest lock
Mounted onto the cabinet fixed wall.
For box mounting supplied with a two colour LED diode.
31
5
,2
39,8
55
54
14
Pin locking is angled. May be used for
both left and right door.
24
MINI cabinet lock dimensions.
Technical specifications
Length 54 mm, width 24 mm, depth 32 mm
Pin board length 55 mm, width 24 mm, depth 5mm
Round pin 25 mm long
Minimum pressure on latch when unlocking
Locking speed – immediately after pin slides in
Electromagnetic coil 12 V DC / 220 mA V
Zero consumption when idle
Diode for IT network protection
Open door signalling
5 pin terminal
Mounted on cabinet fixed wall by two or three screws of 4 mm in diameter
Pin mounted on the small door inner side by three screws with 3.8 mm diameter
Resistant to break in attempts by force of 500 N
ABS material
Standard colour OCHRE YELLOW, BLACK, COMBINATION black and red
Ordering code for black colour: MINI 1
Ordering code for yellow colour: MINI 4
Ordering code for combination of black and red colour: MINI 6
Ordering code for LED diode inside the lock: MINI LED
Delivery date for colour other than yellow must be agreed with the supplier upon ordering.
10
Ordering code MINI 1
Ordering code MINI 6
Ordering code MINI LED
Ordering code MINI 4
Each MINI cabinet lock is fitted with a micro switch to monitor unlocked and locked door.
In key systems or boxes the MINI cabinet lock is fitted with a two-colour LED diode and
a light pipe.
11
CABINET LOCK MINI
24
KEY DEPOSIT BOX
Small safebox
Up to 10 keys can be safely deposited. Access to own key only.
Signalling of unreturned keys. Perfect solution is for medical ambulances,
pharmacies, offices, workshops, households etc.
12
13
KEY DEPOSIT BOX
Shaped, slightly bent glass door
following the box shape with
a sunk keyboard. The unusual
design stands out.
KEY DEPOSIT BOX
Small safebox
330
95
270
Double-layer glass with a foil safeguards
keys.
Signalled events
• Authorized key collection upon entering
code
• Authorized key deposit upon entering
code
• Forced key removal
• Forced key deposit
• Correct code entering
85
• Entering configuration mode
• Access from a PC via USB
• Key case reset
• Main power supply outage
and switch to backup
(accumulator)
• Restoring main power supply
In the most luxurious VIP version,
the key box is fitted with deep gloss
carbon fiber side boards and smoked
glass door.
Key box dimensions.
Small strongbox – compact steel box
Height 330 mm x width 270 mm x depth 95 mm
Metal keyboard 3 x 4
Safety double-layer glass with width of 7.5 mm
Electronic locks with key insertion signalling
Electrically locked glass door
Simple operating – keys are collected from or deposited into the box with
a personally selected code.
Entering a personal code opens the door and a green indicator on the key
panel signals the position for collecting the key. Returning the key requires
the same procedure. When the key is returned into the designated slot
on the panel, the green indicator is switched off, and the key is locked.
The key may only be returned into its original position.
Permanent red position indicator signals a collected key. This enables quick
check of unreturned keys.
When a vacant key position is not assigned to a participant code,
panel indicator is not switched on and the position is locked.
Programming – either via programming mode or USB connection.
Adapter - 15V/1,5A
Backup - 12V accumulator
Ordering code SKR 1
14
Ordering code SKR 4
Ordering code SKR 2
15
KEY DEPOSIT BOX
Ordering code SKR 5
Carbon version box with dark glass
small door SKR 5
Key cover (key case) is plastic with a stainless steel pin.
Keys are fitted with numbers from 1 to 10 and are integral to the box.
The pin is inserted into the key cover (key case), for depositing a key
into the box, the pin is turned and inserted into the adequate numerical
position in the box.
Key cover (key case) is fitted with a space for another set of keys on a ring.
Functional design for comfortable door locking and unlocking.
16
34,5
The pin is embedded on the top side of the key cover. The key is safely deposited
in the box by simple sliding out of the pin.
Key with cover may only be inserted into an open position signalled with the green
LED diode.
17
KEY DEPOSIT BOX
Key cover (or key case) secures the correct key, which must be guarded,
it is not interchangeable with another key in the key cover. Both halves
of the key cover (key case) are glued and pressed together with the key.
The customer shall perform this by himself.
10
39,5
KEY DEPOSIT BOX
Small safebox
ENTRANCE MORTISE LOCK
with self-locking function
For all types of interior and exterior doors for locking without keys.
Lock dimensions enable replacement of older worn out locks without
additional modifications.
Panic handle function with unlocking solely by pressing the handle,
mechanically adjustable L/R.
Entrance lock with
self-locking function
18
19
ENTRANCE MORTISE LOCK with self-locking function
Hotel lock with lockable
latch bolt
ENTRANCE MORTISE LOCK
electromechanical
with self-locking function, only 15 mm wide
with self-locking function, only 15 mm wide
Electrical connection
to terminal
ENTRANCE MORTISE LOCK
mechanical
Dimensions
Technical specifications
Length 170 mm, width 15 mm, depth 77 mm
Handle distance from lock face (including face plate) 50 mm
Handle to cylinder distance 90 mm
Square prism 8x8
Face plate of the lock - length 230 mm, width 22 mm, thickness 3 mm, radius R 11
Latch bolt double-faced – left/right
Handle panic function mechanically adjustable
All critical parts made of stainless steel, treated with new metallurgical technology
Certified ČSN EN 12 209 safety class 6
Ordering code: SAM ME 9050
20
Dimensions
Technical specifications
Length 170 mm, width 15 mm, depth 77 mm
Handle distance from lock face (including face plate) 50 mm
Handle to cylinder distance 90 mm
Square prism 8x8
Face plate of the lock - length 230 mm, width 22 mm, thickness 3 mm, radius R 11
Latch bolt double-faced – left/right
Handle panic function mechanically adjustable for using purpose Electromagnet 10–24V
DC / 250 mA, constant loading
Outlet for monitoring of the slid out latch, slid out latch bolt and of handle movement
All critical parts made of stainless steel, treated with new metallurgical technology
Certified ČSN EN 12 209 safety class 6
Ordering code: SAM EL 9050
Electric arrest of both handles possible, must be specified upon ordering
21
ENTRANCE MORTISE LOCK with self-locking function
HOTEL MORTISE LOCK
mechanical
HOTEL MORTISE LOCK
electromechanical
with self-locking function, only 15 mm wide
Electrical connection
to terminal
For all types of interior and exterior doors with locking without keys
Panic handle function with unlocking solely by compressing the handle,
mechanically adjustable L/R
Technical specifications
Length 170 mm, width 15 mm, depth 77 mm
Handle distance from lock face (including face plate) 50 mm
Handle to cylinder distance 90 mm
Square prism 8x8
Face plate of the lock - length 230 mm, width 22 mm, thickness 3 mm, radius R 11
Latch bolt double-faced – left/right
Handle panic function mechanically adjustable for using purpose
All critical parts made of stainless steel, treated with new metallurgical technology
Certified ČSN EN 12 209 safety class
Ordering code: HOT ME 9050
22
Dimensions
Technical specifications
Length 170 mm, width 15 mm, depth 77 mm
Handle distance from lock face (including face plate) 50 mm
Handle to cylinder distance 90 mm
Square prism 8x8
Face plate of the lock - length 230 mm, width 22 mm, thickness 3 mm, radius R 11
Latch bolt left, or right when turned over
Handle panic function mechanically adjustable for using purpose
Electromagnet 10–24V DC / 250 mA, constant loading
Outlet for monitoring of the slid out latch, slid out latch bolt and of handle movement
All critical parts made of stainless steel, treated with new metallurgical technology
Certified ČSN EN 12 209 safety class
Ordering code: HOTEL 9050
23
HOTEL MORTISE LOCK
Dimensions
HOTEL MORTISE LOCK
motor-powered
CARD ACCESS SYSTEM:
E-rozette M&T
For administrative buildings, hotels, schools, hospitals, military buildings,
warehouses …
Dimensions
Technical specifications
Length 170 mm, width 15 mm, depth 77 mm
Handle distance from lock face (including face plate) 50mm
Handle to cylinder distance 90 mm
Square prism 8x8
Face plate of the lock - length 230 mm, width 22 mm, thickness 3 mm, radius R 11
Latch bolt left, or right when turned over
Handle panic function mechanically adjustable for using purpose
Motor with 5V power input, lithium battery 3.6V 1/2AA
Outlet for monitoring of the slid out latch, slid out latch bolt and of handle movement
All critical parts made of stainless steel, treated with new metallurgical technology
Certified ČSN EN 12 209 safety class
No electronic board inside the Hotel lock. Access system is completed by ordering
company – see next page.
Ordering code: HOT MO 9050
24
Technology:
- electromechanical lock with Erbi panic opening function - M&T
- e-rosette M&T with RFID technology
- electronics + sw TECH FASS s.r.o.
- door fittings with separated square prism M&T6
Development:
- Electromechanical lock with Erbi M&T self-locking function has been
developed in cooperation with M&T Projekt Ltd. and TECH FASS Ltd.
- Fully functioning lock is sold with electronics and antenna for reading
(contactless) RFID cards including a set of door fittings.
- All commercial and service operations are provided by M&T Projekt Ltd.
www.e-rozeta-mt.cz
- E-rosette design and HW are patented by M&T projekt Ltd.
- SW+HW are patented by TECH FASS Ltd., being the producer thereof.
www.techfass.cz
- ERBI systems Ltd. is the producer of Erbi M&T electromechanical lock.
25
HOTEL MORTISE LOCK
INTRALOCK STRONGBOX LOCKS
electromechanical
May be used for transporting money boxes, strongbox locking,
bike rental stands etc.
Up to a force of 6 000 N
Up to a force of 12 000 N
26
27
INTRALOCK STRONGBOX LOCKS
.
May be used for transporting money box, strongbox locking,
bike rental stands etc.
Up to a force of 6 000 N
May be used for transporting money box, strongbox locking,
bike rental stands etc.
Up to a force of 12 000 N
42,6
17
29
73,5
Dimensions
Dimensions
INTRALOCK 600 Strongbox locks with a pin
INTRALOCK 1200 Strongbox lock with a pin
Technical specifications
Length 74 mm, width 40 mm, depth 42 mm
Pin diameter 14
Electromagnetic coil 12V DC / 640 mA
Slid in pin not monitored
Maximum destruction force 6 000 N
Polyamide material
Ordering code with free dead bolt: INT 6 VO
Ordering code with free dead bolt and slid in pin position monitoring: INT 6 VO MI
Ordering code with fixed dead bolt: INT 6 PE
Ordering code with fixed dead bolt and slid in pin position monitoring: INT 6 PE MI
Technical specifications
length 74 mm, width 40 mm, depth 42 mm
Pin diameter 14mm
Electromagnetic coil 12V DC / 640 mA
With microswitch for slid in pin position monitoring
Maximum destruction force 12 000 N
Polyamide material
Ordering code with free dead bolt: INT 12 VO
Ordering code with free dead bolt and slid in pin position monitoring: INT 12 VO MI
Ordering code with fixed dead bolt: INT 12 PE
Ordering code with fixed dead bolt and slid in pin position monitoring: INT 12 PE MI
29
INTRALOCK STRONGBOX LOCKS
42,6
29
73,5
28
14
40
17
3,8
3,8
14
40
30,5
INTRALOCK STRONGBOX LOCKS
electromechanical
30,5
INTRALOCK STRONGBOX LOCKS
electromechanical
SPRING CONTACT FOR DOORS
Simple energy transfer from the door frame into the door itself. Door contacts
are embedded in both the frame and the door. Upon closing the door,
the spring contacts connect, and create an electrical circuit with the lock
or the magnet. The areas of door contacts are large enough to enable
a reliable energy transfer even in case of the door being moved within
the frame or in case of imprecise assembly. Window security. The security
loop is broken with the window being opened. State of danger.
SPRING CONTACT FOR DOORS
with a face plate
Use especially when there is a small gap between a closed door and the frame.
The door contact is screwed onto the face plate and attached with two bolts to
the door or the frame.
Technical specifications
connection type three point
height 86 mm
width 16 mm
Contact area 10 x 10 mm
Contact material steel, brass, nickel
Voltage / power 12V / 30 W 2 A max.
24V / 30 W 1.3 A max.
Load under voltage unlimited
Accessories 4 pieces of plastic washers
Dimensions
Technical specifications
Material stainless steel 18 x 110 x 1.5 mm
Ordering code: PRK LI
Face plates may be ordered individually
Ordering code: PRK 1
30
31
SPRING CONTACT FOR DOORS
Dimensions
Download