MODEL - 1005/1005A
DIAL TYPE THERMOMETER
STANDARD OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches
1005/1005A
Specifications
Temperature Range
Model : 1005
0 -1500C, 0 -1600C, 30 -1500C,
-20 to 1400C
150mm (6”) Round
2700
10C
±1% of FSD
5
15% - 85%
Model : 1005A
0 -1500C, 0 -1600C, 30 -1500C,
-20 to 1400C
150mm (6”) Round
2700
10C
±1% of FSD
5
15% - 85%
3A @ 250V AC/DC
Magnetic Blowout Micro switch
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
S1 & S2: 3°C to 9°C (6±30C)Fixed
S3 to S5: 8°C to 400C Adjustable.
±2.5 0C of Set Value
Available (Potentiometer Output)
Up to 25 Mtrs
Available
Press Fit Wago Type
IP – 55(IEC - 60529)
2.5 KV AC, 50Hz/60Hz for 1 minute; all Terminals to ground
S1 & S2: 3°C to 90C (6±30C)Fixed
S3 to S5: 80C to 400C Adjustable.
±2.50C of Set Value
Available (Potentiometer Output)
Up to 25 Mtrs
Available
Press Fit Wago Type
IP – 55(IEC - 60529)
2.5 KV AC, 50Hz/60Hz for
1 minute; all Terminals to ground
Electrical entry
M20 - 3Nos
M20 - 3Nos
Cable Gland
Optional
Optional
Thermometer Pocket
Optional
Optional
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Max. No. of Switches
Switching Range
Contact Rating
Switch Differential
Switching Accuracy
Remote Repeater
Max. Capillary Length
Switch Test Knob
Electrical Connection
Degree of Protection
High Voltage Test
Remote Repeater 96 Sq
Specifications
Type
4 digits, 0.5’’ Seven Segments LED’s
Auxillary Supply
90 – 260V AC/DC
Resolution
0.10C
Degree of protection of enclosure
IP 20
Operating Temperature Range
00C to 600C
Signal output
4 sets of 4 - 20mA DC
Optional RS 485
Cutout dimension
92 Sq. mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Cold and Dry Test :
-40°C to +70°C
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
Salt Spray Test :
For polyester powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
5.
Micro Switch rating Test :
a) ML - 1005:
3A @ 250V AC &
3A @ 250V DC
b) ML - 1005A:
15A @250V AC &
0.5A @250V DC
Ordering Information
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
Union Type
Repeater
If WTI please specify
1005 /1005A
OTI / WTI
R1. 0 - 150°C
R2. 0 - 160°C
R3. 30 - 150°C
R4. -20 to140°C
(other ranges on request)
S2 - 2switches
S3 - 3switches
S4 - 4switches
S5 - 5switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1”BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
Y - Requried
N - Not Required
Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5°C to 30°C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirement.
Sample Ordering Information :1005\WTI\R3\S2\L2\C2\U1\Y\........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1005H/1005AH
DIAL TYPE THERMOMETER
Hybrid OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to
the instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Embedded PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a master
indication.
• Current Converter Unit (CCU) is mounted inside the Local OTI/WTI, The output from which can be
connected to remote indicator or SCADA are a combination of both.
• For the WTIs additional Winding temperature simulator is provided
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches
ML : 1005H/1005AH
Specifications
Temperature Range
Model : 1005H
0-1500C, 0-1600C, 30-1500C,
-20 to 1400C
150mm (6”) Round
2700
10C
±1% of FSD
5
15% - 85%
Model : 1005AH
0-1500C, 0-1600C, 30-1500C,
-20 to1400C
150mm (6”) Round
2700
10C
±1% of FSD
5
15% - 85%
3A @ 250V AC/DC
Magnetic Blowout Micro switch
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
Electrical entry
S1 & S2: 3°C to 9°C (6±30C) Fixed
S3 to S5: 8°C to 400C Adjustable.
±2.5 0C of Set Value
Available / 4 - 20mA / RS - 485
Up to 25 Mtrs.
Available
Press Fit Wago Type
IP – 55(IEC-60529)
2.5 KV AC, 50Hz/60Hz for 1
minute; Switch connection & C.T.
Terminal to ground.
CCU output 0.5 Kv Ac 50Hz / 60Hz for 1 minute
M20 - 3Nos
S1 & S2: 3°C to 90C (6±30C)Fixed
S3 to S5: 80C to 400C Adjustable.
±2.50C of Set Value
Available / 4-20mA / RS - 485
Up to 25 Mtrs.
Available
Press Fit Wago Type
IP – 55(IEC-60529)
2.5 KV AC, 50Hz/60Hz for 1
minute; Switch connection & C.T.
Terminal to ground.
CCU output 0.5 Kv Ac
50Hz / 60Hz for 1 minute
M20 - 3Nos
Cable Gland
Optional
Optional
Thermometer Pocket
Optional
Optional
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Max.No. of Switches
Switching Range
Contact Rating
Switch Differential
Switching Accuracy
Remote indicator
Max. Capillary Length
Switch Test Knob
Electrical Connection
Degree of Protection
High Voltage Test
Remote indicator 96 Sq
SPECIFICATIONs
Type
4 digits, 0.5’’ Seven Segments LED’s
Auxillary Supply
90 – 260V AC/DC
Resolution
0.10C
Degree of protection of enclosure
IP 20
Operating Temperature Range
00C to 600C
Signal output
4 sets of 4 - 20mA DC
Optional RS 485
Cutout dimension
92 Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Cold and Dry Test :
-40°C to +70°C
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
5.
Micro Switch rating Test :
a) ML - 1005H:
3A @ 250V AC &
3A @ 250V DC
b) ML - 1005AH:
15A @250V AC &
0.5A @250V DC
Ordering Information
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
Union Type
CCU Output for
indication / Scada
If WTI please
specify
1005H/1005AH
OTI / WTI
R1. 0 - 150°C
R2. 0 - 160°C
R3. 30 - 150°C
R4. -20 to140°C
(other ranges on request)
S2 - 2switches
S3 - 3switches
S4 - 4switches
S5 - 5switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1”BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
RI - Remote indicator - T1/T2/T3/T4 (for types, Refer Drawing)
PSU - External power supply with 2 Nos. of 4-20mA output
Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5°C to 30°C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1005AH\OTI\R4\S4\L\C6\U4\RI-T2 ........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1005HX / 1005AHX
DIAL TYPE THERMOMETER
Duplex Hybrid OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Embedded Duplex PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a
master indication.
• Current Converter Units (CCUs) are mounted inside the Local OTI/WTI, The output from which can be
connected to remote indicator and SCADA through external power supply units (PSUs).
• For the WTIs additional Winding temperature simulator is provided
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches
ML: 1005 HX/1005 AHX
Specifications
Temperature Range
Model : 1005HX
0-1500C, 0-1600C, 30-1500C,
-20 to 1400C
150mm (6”) Round
2700
10C
±1% of FSD
5
15% - 85%
Model : 1005AHX
0-1500C, 0-1600C, 30-1500C,
-20 to1400C
150mm (6”) Round
2700
10C
±1% of FSD
5
15% - 85%
3A @ 250V AC/DC
Magnetic Blowout Micro switch
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
Electrical entry
S1 & S2: 3°C to 9°C (6±30C) Fixed
S3 to S5: 8°C to 400C Adjustable.
±2.5 0C of Set Value
Available / 4-20mA / RS - 485
Up to 25 Mtrs.
Available
Press Fit Wago Type
IP – 55(IEC-60529)
2.5 KV AC, 50Hz/60Hz for 1
minute; Switch connection & C.T.
Terminal to ground.
CCU output 0.5 Kv Ac 50Hz / 60Hz for 1 minute
M20 - 3Nos
S1 & S2: 3°C to 90C (6±30C)Fixed
S3 to S5: 80C to 400C Adjustable.
±2.50C of Set Value
Available / 4-20mA / RS - 485
Up to 25 Mtrs.
Available
Press Fit Wago Type
IP – 55(IEC-60529)
2.5 KV AC, 50Hz/60Hz for 1
minute; Switch connection & C.T.
Terminal to ground.
CCU output 0.5 Kv Ac
50Hz / 60Hz for 1 minute
M20 - 3Nos
Cable Gland
Optional
Optional
Thermometer pocket
Optional
Optional
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Max.No. of Switches
Switching Range
Contact Rating
Switch Differential
PSU
Switching Accuracy
Remote indicator
Max. Capillary Length
Switch Test Knob
Electrical Connection
Degree of Protection
High Voltage Test
Remote Indicator 96 Sq
Power Supply Unit - (PSU)
a.
Output Voltage: 24V
b.
Output Signal: Analogue output
2nos. 4-20mA DC
(Output - 1, Burden 250 Ohms)
(Output- 2, Burden 600 Ohms)
c.
Auxiliary supply: 90-260V AC/DC
REMOTE INDICATOR
a
b
d
e
f
g
h
Type : 4 digits, 0.5’’ Seven Segment LED’s
Auxiliary Supply : 90 – 260V AC/DC
Resolution : 0.10C
Degree of protection of enclosure : IP-20
Operating Temperature Range : 0°C to 60°C
Signal output: 4sets of 4-20mA DC, Optional
RS 485
Cutout Dimension: 92Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
Ordering Information
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Cold and Dry Test :
-40°C to +70°C
Model
Type of Instrument
Range
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
5.
Micro Switchrating Test :
a) ML - 1005HX:
3A @ 250V AC &
3A @ 250V DC
b) ML - 1005AHX:
15A @250V AC &
0.5A @250V DC
1005HX/1005AHX
OTI / WTI
R1. 0 - 150°C
R2. 0 - 160°C
R3. 30 - 150°C
R4. -20 to140°C
(other ranges on request)
No. of Switches
S2 - 2switches
S3 - 3switches
S4 - 4switches
S5 - 5switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
Union Type
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1”BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
CCU Output for
RI - Remote indicator - T1/T2/T3/T4 (For Types, Refer Drawing)
indication / Scada
(Connected through external powersupply PSUs)
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5°C to 30°C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1005AHX\OTI\R4\S4\L\C6\U4\RI-T1........... Amps.............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1007
DIAL TYPE THERMOMETER
Standard OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches
ML : 1007
Specifications
Temperature Range
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Max.No. of Switches
Switching Range
Contact Rating
Switch Differential
Switching Accuracy
Remote Repeater
Max. Capillary Length
Electrical Connection
Degree of Protection
High Voltage Test
PSU
Model : 1007
0-1500C, 0-1600C, 30-1500C,-20 to 1400C
115mm, Segment Dial
600
20C
±1.5% of FSD
4
15% - 85%
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
S1 & S2: 3°C to 9°C (6±30C) Fixed
S3 & S4: 8°C to 400C Adjustable.
±2.5 0C of Set Value
Available (Potentiometer Output)
Up to 25 Mtrs.
Press Fit Wago Type
IP – 55 (IEC-60529)
2.5 KV AC, 50Hz/60Hz for 1 minute; all Terminals
to ground
Electrical entry
M20 - 3Nos
Cable Gland
Optional
Thermometer Pocket
Optional
Remote Repeater 96 Sq
Power Supply Unit - (PSU)
a.
Output Voltage: 24V
b.
Output Signal: Analogue output
2nos. 4-20mA DC
(Output - 1, Burden 250 Ohms)
(Output- 2, Burden 600 Ohms)
c.
Auxiliary supply: 90-260V AC/DC
REMOTE INDICATOR
a
b
d
e
f
g
h
Type : 4 digits, 0.5’’ Seven Segment LED’s
Auxiliary Supply : 90 – 260V AC/DC
Resolution : 0.10C
Degree of protection of enclosure : IP-20
Operating Temperature Range : 0°C to 60°C
Signal output: 4sets of 4-20mA DC, Optional
RS 485
Cutout Dimension: 92Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Cold and Dry Test :
-40°C to +70°C
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
5.
Micro Switch rating Test :
15A @250V AC &
0.5A @250V DC
Ordering Information
Model
Type of Instrument
Range
1007
OTI / WTI
R1. 0 - 150°C
R2. 0 - 160°C
R3. 30 - 150°C
R4. -20 to140°C
(other ranges on request)
No. of Switches
S2 - 2switches
S3 - 3switches
S4 - 4switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
Union Type
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1”BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
Repeater
Y - Requried,
N - Not Required
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5°C to 30°C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1007\OTI\R3\S2\L2\C8\U5\Y\........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1007H
DIAL TYPE THERMOMETER
Hybrid OTI / WTI
General Features
•
The fully sealed liquid expansion in the system provides a self powered indication and operation to the instruments, and
does not require any trimming or other periodic adjustments.
•
Instruments are fully compensated for ambient temperature.
•
The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
•
The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
•
Embedded PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a master indication.
•
Current Converter Unit (CCU) is mounted inside the Local OTI/WTI, The output from which can be connected to remote
indicator or SCADA are a combination of both.
•
For the WTIs additional Winding temperature simulator is provided
•
Instrument cases are aluminium die casted and polyester powder coated. Each instrument has anti vibration mountings
and are provided with projection mounting clamps.
•
A maximum pointer facility is provided, can be reset from outside.
•
All switch contacts are potential free micro switches
ML : 1007H
PSU
Specifications
Temperature Range
Dial Size
Dial angular Sweep
Dial Graduation
Accuracy Class
Model : 1007H
0-1500C, 0-1600C, 30-1500C,-20 to 1400C
115mm, Segment Dial
600
20C
±1.5% of FSD
Max.No. of Switches
Switching Range
Contact Rating
4
15% - 85%
15A @ 250V AC
0.5A @ 250V DC
Standard Micro switch
Switch Differential
S1 & S2: 3°C to 9°C (6±30C) Fixed
S3 & S4: 8°C to 400C Adjustable.
Switching Accuracy
Remote Indicator
Max. Capillary Length
Electrical Connection
Degree of Protection
High Voltage Test
Electrical entry
±2.5 0C of Set Value
Available / 4-20mA / RS - 485
Up to 25 Mtrs
Press Fit Wago Type
IP – 55(IEC-60529)
2.5 KV AC, 50Hz/60Hz for 1 minute; Switch
connection & C.T. Terminal to ground.
CCU output 0.5 Kv Ac
50Hz / 60Hz for 1 minute
M20 - 3Nos
Cable Gland
Optional
Thermometer Packet
Optional
Remote Repeater 96 Sq
Power Supply Unit - (PSU)
a.
Output Voltage: 24V
b.
Output Signal: Analogue output
2nos. 4-20mA DC
(Output - 1, Burden 250 Ohms)
(Output- 2, Burden 600 Ohms)
c.
Auxiliary supply: 90-260V AC/DC
REMOTE INDICATOR
a
b
d
e
f
g
h
Type : 4 digits, 0.5’’ Seven Segment LED’s
Auxiliary Supply : 90 – 260V AC/DC
Resolution : 0.10C
Degree of protection of enclosure : IP-20
Operating Temperature Range : 0°C to 60°C
Signal output: 4sets of 4-20mA DC, Optional
RS 485
Cutout Dimension: 92Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Cold and Dry Test :
-40°C to +70°C
3.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
4.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
5.
Micro Switch rating Test :
15A @250V AC &
0.5A @250V DC
Ordering Information
Model
Type of Instrument
Range
1007H
OTI / WTI
R1. 0 - 150°C
R2. 0 - 160°C
R3. 30 - 150°C
R4. -20 to140°C
(other ranges on request)
No. of Switches
S2 - 2switches
S3 - 3switches
S4 - 4switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C25 - 25mts
Union Type
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1”BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
CCU Output for
RI - Remote indicator - T1/T2/T3/T4 (For types, refer Drawing)
indication / Scada
PSU - External power supply with 2 Nos. of 4-20mA output
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5°C to 30°C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1007H\OTI\R3\S2\L2\C8\U5\RI-T4........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1006
DIAL TYPE THERMOMETER
Standard OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches.
ML : 1006
Specifications
Model : 1006
Temperature Range
0-1500C, 0-2400C
Dial angular Sweep
2700
Dial Graduation
20C
Accuracy Class
±1.5% of FSD
Max.No. of Switches
2
Switching Range
15% - 85%
Contact Rating
5A @ 250V AC,
0.5A @ 220V DC
Switch Differential
10C to 50C (30C±20C) Fixed
Switching Accuracy
±2.50C of Set Value
Max. Capillary Length
Up to 6 Mtrs.
Switch Test Knob
Available
Electrical Connection
1Sq mm. Copper Cable, 1mtr Length
Degree of Protection
IP – 55(IEC-60529)
High Voltage Test
2.5 KV AC, 50Hz / 60Hz for 1 minute ; all Terminal to ground
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.Protection class :
IP55 as per IEC 60529 CAT 2.
2.Vibration Test :
Amplitude 1mm,
frequency 50Hz, 1Hr / X,Y,Z axis
3.Salt Spray Test :
For polyster powder coating
and SS 304 Armour for 500 Hrs as per DIN 50021Standard
4.Micro Switch rating Test :
5A @ 250V AC,
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
1006
OTI / WTI
R1. 0 - 150°C.
R2. 0 - 240°C
No. of Switches
S2 - 2switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
Union Type
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1” BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
If WTI please specify Transformer CT Secondary output
..................(1A to 5A) Simulated Temperature rise over top oil
........... (5°C to 30°C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1006\WTI\R1\S2\L2\C5\U5 ........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1006H
DIAL TYPE THERMOMETER
Hybrid OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Embedded PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a master indication.
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches.
ML : 1006H
Specifications
Model : 1006H
Temperature Range
0-1500C, 0-2400C
Dial angular Sweep
2700
Dial Graduation
20C
Accuracy Class
±1.5% of FSD
Max.No. of Switches
2
Switching Range
15% - 85%
5A @ 250V AC,
Contact Rating
ML : 2220-R2 (CCU)
0.5A @ 220V DC
Switch Differential
10C to 50C (30C±20C) Fixed
Switching Accuracy
±2.50C of Set Value
Remote Indicator
Availbale
Max. Capillary Length
Up to 6 Mtrs.
Switch Test Knob
Available
Electrical Connection
1Sq mm. Copper Cable, 1mtr Length
Degree of Protection
IP – 55(IEC-60529)
High Voltage Test Test Voltage
Terminals Details
(a) Local OTI / WTI 2.5 KV AC, 50Hz / 60Hz
Switch connection / CT Connection
(b) Local OTI / WTI 500 V AC, 50Hz / 60Hz
Pt 100 sensor output
(c) CCU
500 V AC, 50Hz / 60Hz
Pt 100 sensor input +4-20mA Output
(d) CCU
2.5 KV AC, 50Hz / 60Hz
CT connection with power supply
Remote Indicator 96 Sq
SPECIFICATION
Type
4 digits, 0.5’’ Seven Segments LED’s
Auxillary Supply
90 – 260V AC/DC
Resolution
0.10C
Degree of protection of enclosure
IP 20
Operating Temperature Range
00C to 600C
Signal output
4 sets of 4 - 20mA DC, Optional RS 485
Cutout dimension
92 Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
4.
Micro Switch rating Test :
5A @ 250V AC,
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
1006H
OTI / WTI
R1. 0 - 150°C.
R2. 0 - 240°C
No. of Switches
S2 - 2switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
Union Type
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1” BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5°C to 30°C)
Note:1) WTI Gradient is factory set. If required customer can adjust as per requirment.
2) External CCU and Remote Indicator is Part of the scheme.
Sample Ordering Information :1006H\WTI\R1\S2\L\C3\U2 ........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1006DH
DIAL TYPE THERMOMETER for
DRY TYPE TRANSFORMER
Winding temperatures Indicator & Controller for Dry Type Transformers / Cast-Resin Transformers with built-in
RTD scheme for Independent Remote indication and 4-20mA DC output for SCADA connection.
Hybrid Instrument
This is a high performance temperature Monitoring instrument with built-in PT-100 Sensor (RTD) & Current
Converter Unit and external Remote indicator with built-in power supply unit
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches
ML : 1006DH
Specifications
Model : 1006DH
Temperature Range
0-2400C
Dial angular Sweep
2700
Dial Graduation
20C
Accuracy Class
±1.5% of FSD
Max.No. of Switches
2
Switching Range
15% - 85%
Contact Rating
5A @ 250V AC,
0.5A @ 220V DC
Switch Differential
10C to 50C (30C±20C) Fixed
Switching Accuracy
±40C of Set Value
Remote Indicator
Availbale
Max. Capillary Length
Up to 6 mtrs
Electrical Connection
1Sq mm. Copper Cable, 1mtr Length
Degree of Protection
IP – 55 (IEC-60529)
High Voltage Test
Switch Contact - 2.5KV AC,50Hz/60Hz for 1 Minute
between Switch Terminals to ground
CCU- 500V AC,50Hz/60Hz for 1 Minute between CCU
Terminals to ground
Power Supply Unit
PSU
Signal out put
2 nos 4-20 mA DC
Aux Supply voltage
90-260V AC/DC
Burden on signal output
600Ω max including loop resistance
Temperature range
0-240°C
Degree of protection
IP-40
Digital Remote indicator
Remote Indicator 96 Sq
Temperature range
0-240°C
Signal input
4-20 mA DC
Aux Supply voltage
90-260V AC/DC
Communication
RS-485MODBUS RTU Communication
(Optional)
Degree of protection
IP 20
Cutout Dimension
92 sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
4.
Micro Switch rating Test :
5A @ 250V AC,
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
1006DH
WTI
R1. 0 - 240°C
S2 - 2switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1006DH\WTI\R1\S2\L\C4
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1006HX
DIAL TYPE THERMOMETER
Duplex Hybrid OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Embedded Duplex PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a
master indication.
• This output can be connected to Remote Indicator or SCADA or combination of both.
• WTI additional Winding temperature simulator is provided.
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches.
ML : 1006HX
Specifications
Model : 1006HX
Temperature Range
0-1500C, 0-2400C
Dial angular Sweep
2700
Dial Graduation
20C
Accuracy Class
±1.5% of FSD
Max.No. of Switches
2
Switching Range
15% - 85%
5A @ 250V AC,
Contact Rating
PSU
0.5A @ 220V DC
Switch Differential
10C to 50C (30C±20C) Fixed
Switching Accuracy
±2.50C of Set Value
Remote Indicator
Availbale
Max. Capillary Length
Up to 6 Mtrs.
Switch Test Knob
Available
Electrical Connection
1Sq mm. Copper Cable, 1mtr length
Degree of Protection
IP – 55(IEC-60529)
High Voltage Test
Test Voltage
Terminals Details
(a) Local OTI / WTI
2.5 KV AC, 50Hz / 60Hz
Switch connection / CT Connection
(b) Local OTI / WTI
500 V AC, 50Hz / 60Hz
Pt 100 sensor output
(c) CCU
500 V AC, 50Hz / 60Hz
Pt 100 sensor input +4-20mA Output
(d) CCU
2.5 KV AC, 50Hz / 60Hz
CT connection with power supply
Power Supply Unit - (PSU)
a.
Output Voltage: 24V
b.
Output Signal: Analogue output
2nos. 4-20mA DC
(Maximum burden 600 Ohms
Including Loop resistantance)
c.
Auxiliary supply: 90-260V AC/DC
Remote Indicator 96 Sq
REMOTE INDICATOR
a
b
d
e
f
g
h
Type : 4 digits, 0.5’’ Seven Segment LED’s
Auxiliary Supply : 90 – 260V AC/DC
Resolution : 0.10C
Degree of protection of enclosure : IP-20
Operating Temperature Range : 0°C to 60°C
Signal output: 4sets of 4-20mA DC, Optional
RS 485
Cutout Dimension: 92Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
4.
Micro Switch rating Test :
a) ML - 1006HX:
5A @ 250V AC,
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
1006HX
OTI / WTI
R1. 0 - 150°C.
R2. 0 - 240°C
No. of Switches
S2 - 2switches
Switch Configuration L - Normally open contact
L2 - Changeover contact
Capillary Length
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
Union Type
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1” BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
CCU Output for
RI - Remote indicator - T1/T2/T3/T4 (For types, Refer Drawing
indication / Scada
(Connected through external powersupply PSUs)
If WTI please specify Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5°C to 30°C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1006HX\OTI\R2\S2\L\C4\U1\RI-T3 ........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1031
DIAL TYPE THERMOMETER
Standard OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has anti
vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches.
ML : 1031
Specifications
Model : 1031
Temperature Range
0-1500C
Dial size
115mm, Segment Dial
Dial angular Sweep
600
Dial Graduation
20C
Accuracy Class
±1.5% of FSD
Max.No. of Switches
2
Switching Range
15% - 85%
Contact Rating
5A @ 250V AC
0.5A @ 220V DC
Switch Differential
10C to 50C (30C±20C) Fixed
Switching Accuracy
±2.50C of Set Value
Max. Capillary Length
Up to 6 Mtrs.
Electrical Connection
1Sq mm. Copper Cable, 1mtr Length
Degree of Protection
IP – 55(IEC-60529)
High Voltage Test
2.5KV AC, 50Hz/60Hz for 1 minute; All terminal to ground
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
Ordering Information
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
4.
Micro Switch rating Test :
5A @ 250V AC,
0.5A @ 220V DC
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
Union Type
If WTI please specify
1031
OTI / WTI
R1. 0 - 150°C.
S2 - 2switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1” BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
Transformer CT Secondary output
..................(1A to 5A)
Simulated Temperature rise over top oil
........... (5°C to 30°C)
Note: WTI Gradient is factory set. If required customer can adjust as per requirment.
Sample Ordering Information :1031\OTI\R1\S2\L2\C6\U2 ........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MODEL - 1031H
DIAL TYPE THERMOMETER
Hybrid OTI / WTI
General Features
• The fully sealed liquid expansion in the system provides a self powered indication and operation to the
instruments, and does not require any trimming or other periodic adjustments.
• Instruments are fully compensated for ambient temperature.
• The WTI instruments have a built in Thermal imaging system for transformer’s hot spot indication.
• The WTIs are provided with gradient adjustment through a shunt for CT secondary input (1A to 5A).
• Embedded PT-100 sensors in the sensing bulb of the local OTI/ WTI provide for a master indication.
• Instrument cases are aluminium die casted and polyester powder coated. Each instrument has
anti vibration mountings and are provided with projection mounting clamps.
• A maximum pointer facility is provided, can be reset from outside.
• All switch contacts are potential free micro switches.
ML : 1031H
Specifications
Model : 1031H
Temperature Range
0-1500C
Dial Size
115mm, Segment Dial
Dial angular Sweep
600
Dial Graduation
20C
Accuracy Class
±1.5% of FSD
Max.No. of Switches
2
Switching Range
15% - 85%
5A @ 250V AC,
Contact Rating
ML : 2220-R2 (CCU)
0.5A @ 220V DC
Switch Differential
10C to 50C (30C±20C) Fixed
Switching Accuracy
±2.50C of Set Value
Remote Indicator
Availbale
Max. Capillary Length
Up to 6 Mtrs.
Electrical Connection
1Sq mm. Copper Cable, 1mtr Lenght
Degree of Protection
IP – 55(IEC-60529)
High Voltage Test
Test Voltage
Terminals Details
(a) Local OTI / WTI
2.5 KV AC, 50Hz / 60Hz
Switch connection / CT Connection
(b) Local OTI / WTI
500 V AC, 50Hz / 60Hz
Pt 100 sensor output
(c) CCU
500 V AC, 50Hz / 60Hz
Pt 100 sensor input +4-20mA Output
(d) CCU
2.5 KV AC, 50Hz / 60Hz
CT connection with power supply
SPECIFICATIONs
Remote Indicator
Type
4 digits, 0.5’’ Seven Segments LED’s
Auxillary Supply
90 – 260V AC/DC
Resolution
0.10C
Degree of protection of enclosure
IP 20
Operating Temperature Range
00C to 600C
Signal output
4 sets of 4 - 20mA DC, Optional RS 485
Cutout dimension
92 Sq.mm
www.precimeasure.com
DIAL TYPE
Precimeasure
Type Tested For
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
Salt Spray Test :
For polyster powder coating and
SS 304 Armour for 500 Hrs as per
DIN 50021 Standard
4.
Micro Switch rating Test :
5A @ 250V AC,
0.5A @ 220V DC
Ordering Information
Model
Type of Instrument
Range
No. of Switches
Switch Configuration
Capillary Length
Union Type
If WTI please specify
1031H
OTI / WTI
R1. 0 - 150°C.
S2 - 2switches
L - Normally open contact
L2 - Changeover contact
C1 - 1mts
C2 - 2mts....... upto C6 - 6mts
U1 - 1/2“ BSP Male
U2 - 3/4” BSP Male
U3 - 1” BSP Male
U4 - 1/2” BSP Female
U5 - 3/4” BSP Female
Transformer CT Secondary output..................(1A to 5A)
Simulated Temperature rise over top oil........... (5°C to 30°C)
Note:1) WTI Gradient is factory set. If required customer can adjust as per requirment.
2) External CCU and Remote Indicator is Part of the scheme.
Sample Ordering Information :1031H\WTI\R1\S2\L\C3\U2 ........... Amps ...............°C
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
Precimeasure
DIAL TYPE BI - METALLIC
THERMOMETER
BI-METALLIC
Bi-metallic type thermometer consists of Helical Bimetal Coil, which will expand or contract according to the
temperature changes, which in turn operates indicating pointer.
General Features
a
a
a
a
a
No external power supply required for indication or operation.
Sealed system which requires no trimming or periodic site adjustments
Directly mounted on the Transformer & Other Process Control Equipments.
A maximum pointer facility is provided, can be reset from outside.
The instruments are capable of working at an ambient temperature range of 00C to +600C.
ML :1070
Model 1070 (Thermometer Without Contact, Top Mounting)
SPECIFICATIONs
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Segment Dial
1050
0-1200C (Other ranges on request)
±40C Between 400C & 1100C
20C per division
PDC Aluminum Casting with Polyester Powder Coated.
Model 1071 (Thermometer With 2 Contact, Top Mounting)
SPECIFICATIONs
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Segment Dial
1050
0-1200C (Other ranges on request)
±40C Between 400C & 1100C
20C per division
PDC Aluminum Casting with Polyester Powder Coated.
Max. Number of Switches
Switch Type
Switch Rating
Switches
Adjustable Range
Accuracy of switch setting
Switch Differential Range
Contact Type
Cable Gland (Polyamide / Brass)
High Voltage Test
ML :1071
2
Micro Switch
5A at 240V AC
Normally Open Type or Changeover Type
200C – 1050C
±40C of Set Value
60C±30C
Potential Free
Cable Gland Size PG16
2KV AC, 50/60 Hz for 1 Minute, All terminals to ground
www.precimeasure.com
* The WTI instruments have a built in Thermal imaging system for transformer’s hot
spot indication.
* WTI Gradient calibration is factory set as per customer specification. If required, a
provision is made for small adjustment at site.
Model 1071 – WTI (Thermometer With 2 Contact, Top Mounting)
Winding Temperature Indicator :
SPECIFICATIONs
ML :1071-WTI
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Segment Dial
1050
0-1200C (Other ranges on request)
±40C Between 400C & 1100C
20C per division
PDC Aluminum Casting with Polyester Powder Coated
Max. Number of Switches
Switch Type
Switch Rating
Switches
Adjustable Range
Switching Accuracy
Switch Differential
Contact Type
Cable Gland (Polyamide / Brass)
High Voltage Test
2
Micro Switch
5A at 240V AC
Normally Open Type or Changeover Type
200C – 1050C
±40C of Set Value
60C±30C
Potential Free
Cable Gland Size PG11-2Nos
2KV AC, 50Hz for 1 Minute, All terminals to ground
ML :1068
Model 1068 (4" Dial Thermometer With 2 Contact, Horizontal Mounting)
SPECIFICATIONs
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Round Dial 4’’
1350
0-1200C (Other ranges on request)
±40C Between 400C & 1100C
20C per division
PDC Aluminum Casting with Polyester Powder Coated
Max. Number of Switches
Switch Type
Switch Rating
Switches
Adjustable Range
Accuracy of switch setting
Switch Differential Range
Contact Type
Cable Gland (Polyamide / Brass)
High Voltage Test
2
Micro Switch
5A at 240V AC
Normally Open Type or Changeover Type
400C – 1050C
±40C of Set Value
60C±30C
Potential Free
Cable Gland Size PG16
2KV AC, 50/60 Hz for 1 Minute, All terminals to ground
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
Precimeasure
ML :1075
Model 1075 (3’’ Dial Horiozontal Mounting with
Maximum Pointer)
Specifications
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Round Dial 3’’
2400
0-1200C (Other ranges on request)
±40C Between 400C & 1100C
20C per division
SS-304 Case (Natural Finish).
ML :1073 / 1074
Model 1073 (4’’ Dial Top Mounting with Maximum Pointer)
Specifications
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Round Dial 4’’
2400
0-1200C (Other ranges on request)
±40C Between 400C & 1100C
20C per division
SS-304 Case (Natural Finish)
Model 1074 (6’’ Dial Top Mounting with Maximum Pointer)
Specifications
Dial
Angular Sweep
Range
Graduation
Round Dial 6’’
2400
0-1200C (Other ranges on request)
±40C Between 400C & 1100C
20C per division
Instrument Case
SS-304 Case (Natural Finish).
Accuracy
www.precimeasure.com
BI-METALLIC
DIAL TYPE BI - METALLIC
THERMOMETER
ML :1078
Model 1078 (3’’ Dial Top Mounting with Maximum Pointer)
Specifications
Dial
Angular Sweep
Range
Accuracy
Graduation
Round Dial 3’’
2400
0 -1200C (Other ranges on request)
±40C Between 400C & 1100C
20C per division
Instrument Case
SS-304 Case (Natural Finish).
ML :1079
Model 1079 (3’’ Dial Entry at Angle 450 with Maximum Pointer)
Specifications
Dial
Angular Sweep
Range
Accuracy
Graduation
Instrument Case
Round Dial 3’’
2400
0 -1200C ( Other ranges on request)
±40C Between 400C & 1100C
20C per division
SS-304 Case (Natural Finish).
All the Models Type Tested For :
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Salt Spray Test :
Model-1068 / 1070 / 1071
For polyster powder coating 500 Hrs as per DIN 50021Standard
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
Precimeasure
Electronic Temperature
Controllers
MODEL 2241B & 2242 WINDING TEMPERATURE INDICATOR / CONTROLLER FOR DRY TYPE TRANSFORMERS
APPLICATION :
MODEL 2241B/2242/2244T3 is designed for monitoring the temperatures of L.V. windings of the Dry-Type Transformer / Cast Resin
Transformers. It will display winding temperatures and take necessary control action as per set and differential values programmed
by the user. The protection system also records maximum temperatures and will display the same along with corresponding channel
number whenever relevant push button is pressed.
SALIENT FEATURES :
a
Power line filter with Fuse is incorporated in the input of the power supply to protect the equipment from High Energy Surge and Electrical Fast Transient.
High Scanning Speed
Remote Indication & Data Acquisition facility with burden upto 600 ohms.
Optional RS-485 MODBUS RTU Communication
Specifications
Temperature Sensor
input
No. of Sensor inputs
No. of Set-points
ML :2241B
Model 2241B
RTD (Pt-100 DIN 43760)
Model 2242
K Type thermocouples
Three
Four (Alarm, Trip, Fan1,
Fan2)
00C – 2500C
Range
00C -3000C
10C
Resolution
0.10C
0
±0.8%, one count under
Accuracy
±1 C
normal conditions.
Display Speed
User Settable (1-99 Seconds)
5 Seconds
Display
Six Nos. 0.5’’ Seven Segment LEDs Four nos 0.5” Seven Segment LEDs
Auxiliary Supply Voltage 90-260 V AC/DC
0-20V AC or 0-240V AC
Output
Analogue output DC 4-20mA
Analogue O/P DC
(Maximum burden 600 Ohms) 0-1mA (10000 Ohms)
4-20mA(600 Ohms
burden)
Communication
Isolated RS-485 MODBUS RTU
RS-485 & RS-232
Communication (Optional).
Communication
Contact Rating @ 5A @ 220 VAC / 5A @ 30 DC
Alarm & Trip 10A@120
Resistive Load
VAC & 8A@240 VAC, Fan1
& Fan2 30A@120/240VAC
Power Consumption
5 Watts
8 Watts
Weight
2Kgs. Approx without packing box 2kgs Approx. without
packing box
Enclosure
Aluminium Pressure Diecasting
Panel Mount thru Cutout
enclosure, powder coated all sides Indoor Mounting only
with acrylic viewing window, IP-55
Temp : -300C to 550C
Operating conditions
Temp:-300C to 700C
ML :2242
Four, Eight & Twelve
Three (Fan, Alarm and Trip)
Type Tested For
Model: 2241B
Model: 2242
1.
Cold and Dry Test :
-30°C to +70°C
1.
2.
Vibration Test :
2.
Amplitude 1mm,
frequency 50Hz, 1Hr / X,Y,Z axis Shock Test :
11ms/15g Procedure as per the
IS: 13779 (12 shots)
Vibration Test :
Amplitude 0.5mm, Frequency 05 to 50Hz,
02 sweeps / X,Y,Z axis
www.precimeasure.com
ELECTRONIC
a
a
a
Electronic Temperature
Controllers
MODEL 2244T3 & 2253 WINDING TEMPERATURE INDICATOR / CONTROLLER FOR DRY TYPE TRANSFORMERS
APPLICATION :
MODEL 2244T3 & 2253 is designed for monitoring the temperatures of L.V. windings of the Dry-Type Transformer / Cast Resin
Transformers. It will display winding temperatures and take necessary control action as per set and differential values programmed
by the user. The protection system also records maximum temperatures and will display the same along with corresponding
channel number whenever relevant push button is pressed.
SALIENT FEATURES :
a
Power line filter with Fuse is incorporated in the input of the power supply to protect the equipment from High Energy Surge and Electrical Fast Transient.
a
a
a
High Scanning Speed
Remote Indication & Data Acquisition facility with burden upto 600 ohms.
Optional RS-485 MODBUS RTU Communication
ML : 2244T3
specifications
Temperature Sensor input
No. of Sensor inputs
No. of Set-points
Range
Resolution
Accuracy
Display Speed
Display
Auxiliary Supply Voltage
Output
Communication
Contact Rating @ Resistive Load
Power Consumption
Weight
Enclosure
Operating conditions
specifications
Temperature Sensor input
No. of Sensor inputs
No. of Set-points
Range
Resolution
Accuracy
Display Speed
Display
Auxiliary Supply Voltage
Output
Communication
Contact Rating @ Resistive Load
Power Consumption
Weight
Enclosure
Operating conditions
RTD (PT-100 DIN 43760)
one
Two (Alarm,Trip)
00C – 2000C (Other Ranges on Request)
10C
±1%
Three nos 0.5” Seven Segment LEDs
90-260V AC/DC (Other voltages on Request)
Analogue output DC 4-20mA (Maximum burden 600 Ohms)
5A@220 VAC / 5A@30 VDC
2 Watts
0.5kgs Approx. without packing box.
96 Sq mm ABS Box Enclosure Panel Mount through Cutout,
IP-20
Temp : 00C to 600C
RTD (PT-100 DIN 43760)
Four
Three (Fan, Alarm and Trip)
-20 to+3000C / 0 - 3000C
10C
±20C
User Settable (1- 30 Seconds)
4 Nos. 0.5’’ Seven Segment LEDs
90-260 V AC/DC
Analogue output DC 4-20mA (Maximum burden 600 Ohms)
RS-485 MODBUS RTU Communication (Optional)
5A @ 220 VAC / 5A @ 30 VDC
5 Watts
0.5Kgs Approx without packing
96 Sq mm ABS Box Enclosure Panel Mount through Cutout,
IP-20
Temp: 00C to 600C
ML : 2253
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
Electronic Temperature
Controllers
Precimeasure
MODEL 2243A OTI / WTI TEMPERATURE INDICATOR / CONTROLLER
APPLICATION :
This scheme is used to Indicate Oil & Winding Temperature of the oil – immersed transformers. Relays are provided for Alarm, Trip
and Cooler Duties, are operated as per the set value. 4-20mA DC signal outputs are provided separately for OTI & WTI for Remote
Indication or SCADA Purpose. The System has the facility to store the maximum temperature attained.
SCHEME CONSISTS OF :
1. PT -100 Sensor 1 No. 2. Electronic Temperature Controller 1 No. 3. Thermometer Pocket 1 No. (Optional)
ML : 2243A
Description
Temperature Sensor input
No. of sensor inputs
CT Sec Current Input
Temperature Rise
No. of Set-points OTI
No. of Set-points WTI
Contact Rating
Range
Resolution
Accuracy
Display
Auxiliary Supply Voltage
Signal Outputs
Type Tested For
1.
Cold and Dry Test :
-30°C to +70°C
Power Consumption
Weight
Enclosure
2.
Vibration Test :
Amplitude 1mm,
frequency 50Hz, 1Hr / X,Y,Z axis
Communication
Operating Temperature
Model: 2243A
MODEL 2246 TAP Position Indicator
SPECIFICATIONs
Model 2246
Signal Input
Range
Display
Auxiliary Supply Voltage
Out put
Resistance (1Kohms per step)
1-39 Position (User settable)
3 nos. 0.5” 7 Segment Leds
90-260 V AC/DC
Four sets of 4-20 mA DC ( Maximum
Burndon 600 Ohms)
RS - 485 Modbus RTU Communication
(Optional)
5 Watts (Max.)
0.5Kgs Approx. without packing
96 sq mm ABS Box Enclousure Panel
Mount through cutout IP-20
00C to 600C
Communication
Power Consumption
Weight
Enclosure
Operating Temperature
Details
RTD (Pt – 100 DIN 43760)
ONE
1.0A to 5.0A (User Selectable)
10C to 450C (User Selectable)
Two Relays for Alarm and Trip (1C/O SPDT Relay
contacts)
Four Relays for Alarm, Trip, Fan 1 and Fan 2 (1C/O SPDT Relay contacts)
5A @ 220 VAC / 5A @ 30 VDC Resistive Load
0-1500C
0.10C
±10C
0.5 Seven Segment LED Display
90-260 V AC/DC
Two analogue Outputs (4-20mA Suitable for 600
Ohms Burdon) Each 1 No.
5 Watts (Max.)
2 Kgs Approx. without packing
Aluminium Pressure Die Casting enclosure,
powder coated with acrylic viewing window, IP-55
RS-485 MODBUS RTU (Optional)
-300C to 700C
ML : 2246
www.precimeasure.com
ELECTRONIC
SPECIFICATION :
Electronic Temperature
Controllers
ELECTRONIC TYPE
MODEL 2220-R1 & 2220-R2 TEMPERATURE INDICATOR
APPLICATION : PRECIMEASURE Electronic Instruments are designed to indicate
the Top Oil Temperature / Winding Temperature of the oil-immersed transformers
in remote control room. This scheme has 2 Nos of 4-20 mA DC Signal outputs
proportional to the temperature range. Signal OUTPUT – 1 is connected to an
indicator for indicating temperature at remote and OUTPUT – 2 can be connected
to Recorder or Data Acquisition System.
SCHEME CONSISTS OF :
1.
PT -100 Sensor 1 No.
2.
Current Converter Unit 1 No.
3.
Remote Indicator 1 No.
4.
Thermometer Pocket 1 No. (Optional)
SPECIFICATIONs :
SL.
1
a.
b.
2
Description
Model 2220 – R1
Model 2220 – R2
PT 100 SENSOR ASSEMBLY
Element : Simplex, 3 wire system / Duplex, 6 Wire System
Tolerance : DIN 43760, Class ‘B’






CURRENT CONVERTER UNIT WITH POWER SUPPLY UNIT







IP-55
Aluminium Casting.











IP-40
ABS, DIN Enclosure Box.






a
b
c
d
e
f
g
Signal Input : PT 100 RTD, Simplex 3 wire
Auxiliary Supply : 90 – 260V AC/DC
Signal Outputs : 4 – 20mA DC corresponding to temperature range
Burden on Output Signal : 600 Ohms maximum including loop resistance
Accuracy of Signal Output : ±1% of F.S.D.
Degree of protection of enclosure
Casing
3
REMOTE INDICATOR
a
Type : 4 digits, 0.5’’ Seven Segment LED’s
b
Auxiliary Supply : 90 – 260V AC/DC
c
Temperature indicator range : 0-1500C (Other ranges on request)
d
Resolution : 0.10C
e
Degree of protection of enclosure : IP-20
Type Tested For
Model: 2220-R1& 2220-R2
1. 2220-R1, Protection class :
IP55 as per IEC 60529 CAT 2.
2. 2220-R2, Protection class:
IP40 as per IEC 60529 CAT 2
3.Cold and Dry Teast :
-30°C to +70°C
4.Vibration Test :
Amplitude 1mm, frequency 50Hz,1Hr / X,Y,Z axis
5. EMI / EMC Test :
a) Electrostatic Discharge
Immunity Test as per
IEC61000-4-2, 2001
b) Electrical Fast Transient Immunity Test as per
IEC61000-4-4, 2004
c) High Energy Surge
Immunity Test as per
IEC61000-45, 2005
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
MAGNETIC OIL LEVEL
GUAGE
Precimeasure
Model 1080 - 4" & 6"
APPLICATION:
Magnetic Oil Level Gauge (MOG) is used to Measure Oil Level of oil filled Transformers & Oil filled Tanks.
SPECIFICATIONS :
Liquid in Tank
Transformer oil to IS 335 and or any other Oil
Working Temperature
-30 to 100°C of oil
Working Pressure
0 to 4 Kg / Cm2
Working Environment
Indoor or Outdoor
INDICATION :
Dial size
4" & 6" Round
Color Black marking on white background or
any other combination as required. Standard
Red Line Indication for Min. to Empty Level
Angular Sweep
300°
FLOAT (SENSOR) AND ARM :
Material
Float :Polyurethane Foam/Brass
Float Arm : Brass
Float-Arm Length
Fixed Length as given by Customer
Travel
Max. 45° Below & Above from the centre
Margin
Leave Min. 40 mm beyond lower & higher
limit markings to avoid striking of float to
bottom & top of conservator.
Type
Micro switch
Contact Rating
5A @ 240V AC, 0.25A 220V DC
Type Tested For
OTHERS
SWITCH :
Ordering Information
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
Model No
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
Conservator Diameter
1080/4
Float Arm Length
Mounting Vertical/Inclined
If Inclined Mention Angle
And other Specifications if any
MODEL: 1090
SIZE: 1” B.S.P MALE
PRESSURE RELIEF DEVICE
Application:
PRD is a safety device for the distribution transformer up to 5000KVA, OLTC and other similar
equipments. This PRD is used to prevent heavy damages of the tank in case of sudden rise of
internal pressure.
operating Pressure :
Operating Pressure range available from 0.2 to 0.7 kg/sq.cm with tolerance
±0.05 kg/sq.cm.
General Features
•
•
•
•
•
Safe spring loaded design that does not require external power supply for operation
Positive downward directional flow limits horizontal spraying of hot oil on adjacent equipment
Large diameter top cover with improved operating force providing better protection
Transport safety clip to prevent oil spillage during transportation of oil filled transformers
Available in brass or Zamak body construction
www.precimeasure.com
BEARING / AIR
TEMPERATURE INDICATOR /
CONTROLLER
Precimeasure
Model 1006 - BTD/ATD
APPLICATION :
This Instruments is used for monitoring and controlling the Bearing/ Air Temperature of the Motor and Generators
Type Tested For
SPECIFICATIONS :
Temperature Range
0-150°C (Other Ranges
on request)
Dial Size
150mm (6") Round
Dial Angular Sweep
270°
Dial Graduations
2°C per Division
Accuracy Class
±1.5% of F.S.D Max. No. of Switches
2
Switch Setting
15% to 85%
Switch Contact Rating
5A at 250 V AC & 0.5A
at 220V DC
Switch Differential
3 °C± 2 C (Fixed)
Accuracy of Switch Setting
±2.5°C of Set Value
Max. Capillary Length
Up to 15 Meters
Mounting
Flush / Projection
1.
Protection class :
IP55 as per IEC 60529 CAT 2.
2.
Vibration Test :
Amplitude 1mm, frequency 50Hz,
1Hr / X,Y,Z axis
3.
Micro Switch rating Test :
5A @ 250V AC &
0.5A @ 220V DC
PORTABLE OIL BATH
Model HOB -180
For OTI & WTI Caliberation
Display Specification
Range
Ambient +5°C To 180°C
Display
Dual 4 Digit Display
Disply Resolution
0.1°C
Temp-Setting
With Push Button Data Entry
General Specification
System Acuracy
Better Then ±0.5% Of Reading Or ±0.5%C
(Which Ever Is Higher)
Stability
Better Then ±0.5%C
Set Point Archive Time
Approx. 30 Minutes
Stabilization Time
Approx. 20 Minutes After Reaching Set Value
Electrical Specification
Power Consumption
300 Watts Approx.
Power Supply
230Vac, 50Hz
Physical Specification
Dimensions
6” (W) X 14” (H) X 9”(L)
Weight
5.5 Kgs Approx.
Heating Media
Silicon Oil / Transformer Oil
Oil Volume
1.5 Ltr Approx
Well Depth
160 mm
Accessories
Drain Locking ‘O’ Ring
Stirring
By Mechanical Stirrer Of Ig Motor
Precimeasure Controls Pvt. Ltd.
Registered Office & Works :
Branch Office & Works :
Phone : + 91-80-4260 2705 / 08
Fax : + 91-80-4155 2205
E-Mail : sales–bng@precimeasure.com
Phone : + 91-44-2250 0191 / 2250 0175
Fax : + 91-44-2250 0175
E-Mail : sales–chn@precimeasure.com
No. 168/C Industrial Suburb,
Peenya 3rd Phase, Bangalore - 560058. India
No. 27,28,30, Block-II, 2nd Floor,
Sidco Electronics Complex, Guindy, Chennai - 600032. India
Western India Region Office :
Mobile : 09377561070
E-Mail : sanjay@precimeasure.com
www.precimeasure.com
SCHEME
Scheme drawing
Precimeasure
www.precimeasure.com
Scheme drawing
Precimeasure
www.precimeasure.com