N100 Control and signalling units 30.5mm
Selector and key selector operators
Refer Catalogue C-100
Special operator heads
Non maintaining deflection heads
Requires only a 15˚ deflection from any angle to operate. Supplied complete with guarded
pushbutton less contact blocks.
Description
Cat. No. 1x10/TOCO
Cat. No.
95 mm wobble stick head with IP 54 guarded pushbutton operator
1X10/TOCO
48 mm palm operator with IP 54 guarded pushbutton operator
1X11/TOCO
Emergency stop mushroom head operators
Push/pull mushroom heads supplied complete with guarded pushbutton less contact blocks.
Description
Cat. No.
38 mm maintaining mushroom head with IP 54 guarded button operator 1X20/TOCO
54 mm maintaining mushroom head with IP 66 guarded button operator 1X21N/NTOC
Cat. No. 1x11/TOCO
Emergency stop mushroom head operators
Complete panel mount mushroom operator head operators less contact blocks.
Description
38 mm maintaining IP 65 mushroom operator “twist to reset”
Cat. No.
1X30
54 mm maintaining non padlockable heavy duty IP 66 mushroom
NEW
operator “pull to reset”
1X40NP
54 mm maintaining and padlockable heavy duty IP 66 mushroom
operator “pull to reset” (padlockable in 4 x 90˚ positions)
Cat. No. 1x20/TOCO
Cat. No. 1x30
Cat. No. 1x40
1X40 1)
Heavy duty control units
Wide range of pushbuttons with
standard inserts, raised buttons, legend
plates, full range of colours
Full voltage type pilot lights and
indicators also 'Push-to-Test'
Touch a finger to any NHP pushbutton, and there’s positive
response every time. Why are NHP control units more dependable
than others? Because, with each operation, the fine silver contacts
are cleaned. The rolling, wiping action between the moveable and
stationary contacts as they make or break the circuit, wipes off any
dust or non-conducting film that may be present. It’s an NHP
exclusive.
Selector switches with knob, lever or
key operators
Features
• Interchangeability of many parts
• Designed for minimum front projection of operators
• Stationary terminals are held solidly to the blocks
• Fine silver with exclusive wipe action contacts are used
throughout the line
• Available in a wide variety of standard and custom-built stations
• Manufactured from non-ferrous components
• All contact blocks with finger protection
Australian made products
Pull to reset and twist to reset
mushroom head operators
Also available standard range of
Pushbutton stations in fibreglass or
cast aluminium including 'stoplock'
Emergency stop stations
Corrosive and water resistant
heavy duty control units
Full voltage type pilot light
Short lever selector switch
Pushbutton unit with chrome
ferrule, legend and insert
Standard pushbutton unit
Pushbutton unit with
hoseproof neoprene cover
Mushroom head operator
momentary contact
Pushbutton unit with
legend plate and insert
Mushroom head operator,
pull to reset, padlockable
“Push-to-test” IP 54 transformer type
pilot light with plastic lens
Mushroom head operator,
twist to reset
NT1-DESL
SS8 with operators
fitted
FT1-DES
IP 65
N100 Heavy-duty IP 66 30.5mm operators
Components for self assembly
Refer Catalogue C-100
N100 operators can be customised to suit every application.
By selecting components you can order the exact operator to suit your needs.
Pushbuttons and inserts
Special operator heads
Selector and key selector switches
Pilot lights and lenses
Contact blocks
Legend plates
3
1
2
4
Pushbuttons
Eg.
1 NTOCO
2 P23
Operator
Bodies
3 NPAFP
Inserts/
Mushroom
Heads
Contact
Blocks
4 B11
Legend
Plates
2
1
3
Selector and key selector switches
Eg.
1 NUCC
Operator
Bodies
2 NPAFP
Contact
Blocks
3 B72
Legend
Plates
30.5mm PUSHBUTTON OPERATOR HEADS
Type N100
“SUPPLIED AS COMPLETE
OPERATORS LESS CONTACTS”
Non maintaining deflection heads
■
Requires 15˚deflection from any angle to operate.
Description
1X10/TOCO wobble stick
Cat. No.
95mm wobble stick head and IP54 pushbutton operator
48mm palm operator and IP54 pushbutton operator
1X10/TOCO
1X11/TOCO
Emergency stop mushroom head - maintaining
Description
Cat. No.
38mm maintaining and IP54 pushbutton operator
50mm maintaining and IP54 pushbutton operator
50mm maintaining and IP66 pushbutton operator
1X20/TOCO
1X21/TOCO
1X21N/NTOCO
Emergency stop mushroom head - maintaining
Complete panel mount mushroom head operators less contact blocks.
Description
1X11/TOCO palm operator
Cat. No.
40mm maintaining IP65 mushroom operator “twist to reset”
54mm maintaining and padlocking heavy duty IP66 mushroom
operator “pull to reset” (padlockable in 4x90˚positions)
1X30
1X40
Dimensions (mm)
1X 20/ TOCO 1X 21/TOCO
Emergency stop operators
1X10 wobble stick operator
1X 30/ TOCO 1X 40/TOCO
Emergency stop operators
1X 20 emergency stop operator
1X11 palm emergency operator
1X 21 emergency stop