1
Planar Monolithics Industries, Inc.
2
TABLE OF CONTENTS
PMI NEW RESEARCH & DEVELOPMENT PRESENTATION
TABLE OF CONTENTS
1 Amplifiers
5
2 Attenuator Variable
25
3 Couplers, Dividers & Hybrids
42
4 DLVAs, ERDLVAs & SDLVAs
54
5 DTOs, Frequency Synthesizers & Frequency Doublers
83
6 Filters & Diplexers
97
7 Form, Fit & Function Products
109
8 IFMs & Frequency Discriminators
111
9 Integrated MIC/MMIC Modules
118
10 I/Q Vector Modulators
138
11 Limiters & Detectors
146
12 Log Amplifiers
159
3
TABLE OF CONTENTS
PMI NEW RESEARCH & DEVELOPMENT PRESENTATION
TABLE OF CONTENTS
13 Pulse & Bi-Phase Modulators
163
14 Phase Shifters
169
15 Rack & Chassis Mount Products
195
16 UP & Down Converters, Receiver Front Ends & Transceivers
197
17 Single Sideband Modulators
210
18 SMT & QFN Products
215
19 Solid State Switches
218
20 Switch Matrices
252
21 Switch Filter Banks
256
22 Threshold Detectors
262
23 USB Products
272
4
1- AMPLIFIERS
5
LIMITING AMPLIFIER
PEC3-40-1D6G2D7G-15LM-SFF
Frequency Range
Noise Figure:
Gain:
1.6 to 2.7GHz
5.5dB max. @ +25C
35dB min.
Gain Flatness:
±2.0dB max. - Over any 1GHz
(over operating temperature)
VSWR:
2.0:1 max.
Saturated Output Power:
+15dBm min. (±2dB)
Input Power Range:
-25 to +5dBm min
-30 to +5dBm goal
Saturated Power Flatness:
±1.5dB max.
Harmonic Content:
Reverse isolation:
Pulse Response
Overshoot:
Settling Time:
Recovery Time:
Maximum Input Power: (No
Damage)
DC Voltage Supply
DC Current Draw
Connectors
Sealing:
Size
-15dBm min.
-18dBm goal
50dB min.
0.4dB max.
15nsec max.
50nsec max.
+25dBm CW
+12 to +15V
400mA max.
SMA(F)
Non-Hermetic
1.91" x 0.78" x 0.36"
6
LIMITING AMPLIFIER
PEC3-40-1D6G2D7G-15LM-SFF
POWER
LEVEL
1.6 GHz
2.7 GHz
-30 dBm
12.3
12.73
-25 dBm
15.57
15.64
-20 dBm
16.62
16.69
-15 dBm
16.92
17.07
-10 dBm
17.06
17.09
-5 dBm
17.07
17.09
0 dB,
17.08
17.05
+5 dBm
16.95
17.03
7
LIMITING AMPLIFIER
PEC-85-0R32R5-15LM-12-SFF
Frequency Range
0.3 to 2.5GHz
Operating Input Power
+10dBm CW max.
Survival Input Power
+15dBm CW max.
Limited RF Output
+15dBm ± 2.5dBm
Noise Figure
5.0dB typ..
VSWR In / Out
2.0:1 max.
DC Voltage Supply
+12VDC
DC Current Draw
485mA typ.
Connectors
SMA(F)
Size
5.0" x 1.5" x 0.51"
Finish
Gold Plated
VNA GAIN 82 dB Typ.
8
LIMITING AMPLIFIER
PEC-85-0R32R5-15LM-12-SFF
LIMITED RF OUTPUT +15dBm ±2.5dB
Input & Output Return Loss
9
LIMITING AMPLIFIER
PEC2-2G18G-2DBM-LM-SFF
Frequency Range
2.0 to 18.0GHz
Input Power
-50 to +30dBm CW
Output Power
+2.0dBm Nominal
Output power Variation vs. Input Power
±2.0dB max.
Noise Figure
10dB max..
Spurious Performance
-60dBc typical
Harmonic Performance
-10dBc typical
VSWR In/Out
2.0:1 max.
DC Voltage Supply
+12 to +15
DC Current Draw
460mA typical
Connectors
SMA(F)
Size
2.98" x 0.78" x 0.36"
Noise Figure
10
2.0 to 18.0 GHz, Limiting Amplifier
PEC2-2G18G-21DBM-LM-SFF
Frequency Range
2.0 to 18.0GHz
Input Power
-45 to +10dBm CW
Output Power
+21.0dBm to +25dBm Nominal
Output power Variation vs.
Input Power
±2.0dB max. over operating
temperature
OP1dB
4dBm below Psat typical
2nd Harmonic Rejection
-8dBc @ Psat
Third Order Intercept
35dBm typical
VSWR In/Out
2.0:1 max.
Maximum Input Power
+17dBm CW
DC Voltage Supply
+15
DC Current Draw
700mA max.
Connectors
SMA(F)
Size
2.98" x 0.78" x 0.36"
Saturated Output Power @ -45dBm
11
2.0 to 4.0GHz, Low Noise Amplifier
PMI MODEL No: PEC-30-2G4G-21-8V-SFF
Low Noise Amplifier designed for Military and Industrial applications.
This amplifier is supplied in our EMI shielded hermetically sealed PE2
housing with SMA female connectors. This amplifier provides >30dB
of Gain with a typical noise figure of 1.5dB and an OP1DB of +21 dBm
minimum and operates from 2.0 to 4.0 GHz. This amplifier operates
on a +8VDC supply (+8.5 V maximum) with a Typical DC current draw
of 235 mA (Maximum of 380 mA).
PARAMETERS
SPECIFIED VALUE
TEST
RESULTS
Frequency Range:
2 GHz – 4 GHz
2 GHz – 4 GHz
Gain:
30dB Min.
33.1 dB
Gain Flatness:
±1.0dB Max.
±0.56 dB
Noise Figure:
1.5dB Typ.
1.56 dB
OP1dB:
+21dBm Min.
+22.7 dBm
VSWR:
(Input/Output)
2.0:1 Max
Input: 1.67:1
Output: 1.29:1
Input Power:
+12dBm CW Max.
Pass
DC Supply (See
Note 1):
+7.8 to 8.2VDC @
380mA Max.
235 mA @ +8VDC
*Note 1: No internal voltage regulation or reverse voltage
protection. +8.5VDC maximum or damage will occur.
12
2.0 to 4.0GHz, Low Noise Amplifier
PMI MODEL No: PEC-30-2G4G-21-8V-SFF
13
9.0 to 10.0GHz, Low Noise Amplifier
PEC-37-9G10G-3R0-27-SFF
Frequency Range
9.0 to 10.0GHz
Nominal Gain @ +25C Base Plate
Temperature
34dB min., 40dB max.
Gain Flatness
±0.35dB typ., ±0.5dB max.
Gain Variation over Temperature
±2dB typical
Noise Figure
2.5dB typ., 3.0dB max.
OP1dB
+27dBm min., +28dBm typ.
OIP3
+31dBm typ.
VSWR In / Out
1.7:1 typ., 2.0:1 max.
Spurious
-60dBc max.
DC Voltage Supply
+12V @ 400mA typ.
Connectors
SMA Female
Size
1.5" x 1.0" x 0.4"
Finish
Nickel Plated
14
1.0 to 2.0GHz, Low Noise Amplifier
PE2-35-1R02R0-1R4-17-12-SFF
Frequency Range
1.0 to 2.0GHz
Gain
35dB typ.
Gain Flatness
±0.75dB typ.
Noise Figure
1.4dB typ.
OP1dB
17dBm typ.
VSWR In/Out
2.0:1 typ.
DC Voltage Supply
+12 to +15
DC Current Draw
160mA typ.
15
1.0 to 2.0GHz, Low Noise Amplifier
PE2-35-1R02R0-1R4-17-12-SFF
GAIN AND RETURN LOSS
NOISE FIGURE
16
10KHz to 40MHz Low Noise Amplifier
PMI Model: PEC-60-10K40M-3R5-14-12-SFF
GAIN
FREQ
10KHz
50KHz
100KHz
500KHz
1MHz
GAIN
61.5
61.9
61.9
61.9
61.9
Parameters
Specification
Frequency
10.0 KHz to 40.0 MHz
Gain
+60dB
Gain Flatness
±1.0dB Max
Noise Figure
3.5dB Max
VSWR (In/Out)
1.8:1 Max
OP1dB
+14dBm Min
OIP3
21dBm
DC POWER
±12 to ±15 VDC
DC POWER DRAW
225 mA Max
17
30MHz to 18GHz, Low Noise Amplifier
PEC-38-30M18G-12-SFF
PARAMETERS
SPECIFIED VALUE
Frequency Range
30 MHz to 18.0 GHz
Gain
+38 dB TYP.
Flatness
+/- 2.0 dB Max.
Noise Figure
5.0 dB Max.
Pout @ 1dB
Compression
+12dBm
VSWR (In/Out)
2.2:1 Max.
DC Supply
+12vdc @ 300mA Max.
18
30MHz to 18GHz, Low Noise Amplifier
PEC-38-30M18G-12-SFF
GAIN & RETURN LOSS
Noise Figure
30MHz to 500MHz
Noise Figure
500MHz to 18GHz
19
Small Signal, High Gain Amplifier
with Bias-T at Output
PE2-30-218-4R0-20-12-SFF-BT
Parameters
Specified Value
Frequency Range
2.0 to 18.0 GHz
Gain
+30 dB Typical
Gain Flatness
+/-2.0 dB Maximum
Noise Figure
4.0 dB Maximum
Pout @ 1dB Compression
+20 dBm Minimum
O1P3
+30 dBm Typical
VSWR In/Out
2.0:1 Maximum
Bias-Tee
Output SMA
DC Power Supply
+12 to +15vdc Typical
@ 350mA Maximum
20
10MHz to 6GHz, Test Bench Amplifier
Model: PLNA-30-10M6G-P1dB22-120VAC
Frequency Range
10 MHz to 6.0 GHz
Gain
30 dB typ. - Measured 34.3 dB
Gain Flatness
±2.0 dB max. - Measured ±1.35 dB
Noise Figure
4.5 dB typ., 5.25 dB max.
Measured 4.9 dB
OP1dB
+22 dB min. - Measured 22.33 dB
VSWR In/Out
2.0:1 typ. - Measured 1.99:1
Maximum RF Input:
+10 dBm CW
AC Voltage Supply
110 VAC
AC Connector
3 Pin IEC
On/Off Switch
Vandel Switch Illuminated
RF Connector In/Out
N-Type
Size
3.0" x 3.0" x 1.75"
Finish
Painted Blue
21
10MHz to 6GHz, Test Bench Amplifier
Model: PLNA-30-10M6G-P1dB22-120VAC
GAIN, FLATNESS, INPUT/OUTPUT RETURN LOSS
22
1.0GHz to 40GHz, Test Bench Amplifier
Model: PTB-42-1G40G-12-292FF-DC12
PMI Model PTB-42-1G40G-12-292FF-DC12 is a portable amplifier that operates
over the 1.0 to 40.0GHz frequency range. This model provides 40dB of typical gain
with an OP1dB of +22dBm typical (1-18GHz) and +18dBm typical (18-40GHz). This
amplifier features an on / off switch that is located on the front panel. This amplifier
can operate on either 120VAC or via an external +12VDC supply.
Frequency Range
1.0 to 40.0GHz
Gain
40dB typ.
Gain Flatness
±2.5dB typ.
Noise Figure
5.0dB typ. mid-band
OP1dB
+22dBm typ. (1-18GHz)
+18dBm typ. (18-40GHz)
VSWR In/Out
2.5:1 typ.
Maximum RF Input:
+15dBm
AC Voltage Supply
120VAC
DC Voltage Supply (External)
+12VDC
23
1.0GHz to 40GHz, Test Bench Amplifier
Model: PTB-42-1G40G-12-292FF-DC12
24
2 - ATTENUATORS - VARIABLE
25
MINIATURE VOLTAGE VARIABLE ATTENUATOR
PMI MODEL : VVA-1G4G-15-5-CD-1
PARAMETERS
SPECIFICATIONS
FREQENCY
1.0 to 4.0 GHz
INSERTION LOSS
2.0 dB Typ
ATTENUATOR RANGE
Insertion Loss to 15dB
Min.
ATTENUATOR FLATNESS @
0dBm
±0.5dB Typ
VSWR @ 0dB Attenuation
2.0:1 Typ
Input RF Power for 0.25dB
Compression
+4dBm Typ.
Control Voltage
0 to 5VDC
26
PMI MODEL: DTA-14G40G-32-CD-2
DIGITALLY VARIABLE ATTENUATOR
•
•
•
•
14.0 to 40.0 GHz Frequency Range
Single +15VDC Operation
>32dB Attenuation Range
Fast Switching Speeds
Frequency Range
14.0GHz to 40.0GHz
Mean Attenuation Range
32dB Min.
LSB
Insertion Loss
VSWR
0.4dB
9.0dB Max.
2.0:1 Max.
Operating Input P1dB
+10dBm Typ.
Attenuation Flatness
±0.74dB @ 10dB Attenuation
±1.18dB @ 20dB Attenuation
±1.61dB @ 30dB Attenuation
Attenuation Accuracy
±0.26dB @ 0 to 10dB Attenuation
±0.08dB @ 10 to 20dB Attenuation
Switching Speed
Digital Control
DC Voltage
±0.10dB @ 20 to 30dB Attenuation
1usec Max. “ON”
– Measured 120ns
0.5usec Max. “OFF”
– Measured 120ns
10-BIT Binary TTL
+15 @ 100mA Max
- Measured 41mA
DC Connector
15 Pin Micro-D Female (Mating
Connector Supplied)
RF Connectors
Size
2.92mm Female
2.0 x 1.8 x 0.5
27
PMI MODEL: DTA-14G40G-32-CD-2
DIGITALLY VARIABLE ATTENUATOR
Delay
“ON” 200nS/Div.
Delay
“OFF” 200nS/Div.
28
PMI MODEL: DTA-100M40G-30-CD-1
DIGITALLY VARIABLE ATTENUATOR
•
•
•
•
100MHz to 40.0 GHz Frequency Range
Single +15VDC Operation
30dB Attenuation Range
Low Insertion Loss
Frequency Range
100MHz to 40.0GHz
Mean Attenuation Range
30dB
LSB
VSWR
1.0dB
5.0dB Typ. (Up to 20GHz)
8.0dB Typ. (Up to 40GHz)
2.5:1 Max.
Operating Input P1dB
+20dBm Typ.
Attenuation Accuracy
Switching Speed
Digital Control
±2.5dB Typ.
1usec Max. “ON”
0.5usec Max. “OFF”
5-BIT Binary TTL
DC Voltage
+15 @ 50mA Max
DC Connector
15 Pin Micro-D Female (Mating
Connector Supplied)
RF Connectors
Size
2.92mm Female
2.0 x 1.8 x 0.5
Insertion Loss
29
PMI MODEL: DTA-100M40G-30-CD-1
DIGITALLY VARIABLE ATTENUATOR
RISE TIME: 42.5nS
Delay ON: 266.0nS
FALL TIME: 64.0nS
Delay OFF: 129.5nS
30
PMI MODEL: PDVAN-8018-60-8-OPT25DBM
OCTAVE BAND, DIGITALLY VARIABLE ATTENUATOR
•
•
•
•
+25 dBm Minimum RF Power Handling
8.0 to 18.0 GHz Frequency Range
<4.0 dB Insertion Loss
60dB Attenuation Range
Frequency Range
8.0GHz to 18.0GHz
Mean Attenuation Range
60dB
LSB
Insertion Loss
VSWR
Survival Power Rating
0.25dB
4.0dB Goal, 5.0dB Max.
2.0:1 Max.
+30dBm CW Max.
Operating Input Power
+25dBm CW Min.
Attenuation Flatness
±0.80dB @ 10dB Attenuation
±1.10dB @ 20dB Attenuation
±1.5dB @ 40dB Attenuation
±1.6dB @ 60dB Attenuation
Switching Speed
Digital Control
Input Tracking
DC Voltage
800nsec Max.
8-BIT Binary TTL
Monotonic
+12 to+15 @ 150mA Max / -12 to -15
@ 75mA Max.
DC Connector
15 Pin Micro-D Female (Mating
Connector Supplied)
RF Connectors
Size
SMA Female
2.00 x 1.80 x 0.50
31
PMI MODEL: PDVAN-8018-60-8-OPT25DBM
OCTAVE BAND, DIGITALLY VARIABLE ATTENUATOR
Delay “ON”
688.50nS
Delay “OFF”
657.0nS
32
PMI MODEL: DTA-1G18G-60-CD-2
DIGITALLY VARIABLE ATTENUATOR
•
•
•
•
60dB Dynamic Range
1.0 to 18.0 GHz Frequency Range
4.5dB Insertion Loss Max.
VSWR 2.0:1
Frequency Range
1.0GHz to 18.0GHz
Mean Attenuation Range
60dB
Insertion Loss
VSWR
4.5dB max
2.0:1 max
Attenuation Flatness
±1.0dB typ @ 20dB Attenuation
±1.25dB typ @ 40dB Attenuation
±3.0dB typ @ 60dB Attenuation
Attenuation Accuracy
±1.0dB @ 0dB to 20dB Attenuation
±1.5dB @ 20dB to 40dB Attenuation
±2.0dB @ 40dB to 60dB Attenuation
Minimum Attenuation Step
0.06dB
Operating Power
15dBm typ
Survival Power
1W average from -65 ºC to +25 ºC
Switching Time:
On Time
1.0usec Max. (0.31usec Measured)
Off Time
0.5usec Max. (0.06usec Measured)
DC Power Supply
+/-15V @ 100mA max
Connectors
2 SMA & 15 PIN D-Sub
Shipped with mating D-Sub
Weight
Finish
3.0oz (85g) approx.
Painted Gray
Logic Input
Logic "0" (Bit Off): -0.3 to +0.8V
33
DIGITALLY TUNED ATTENUATORS
PMI MODEL DTA-2G18G-60-CD-1
PARAMETERS
SPECIFICATIONS
FREQUENCY
2.0 TO 180 GHz
ATTENUATION RANGE
60dB
INSERTION LOSS
4.5dB Max
VSWR
2.0:1 Max
FLATNESS
@ 20dB = ±1.0dB Typ
@ 40dB = ±1.25dB Typ
@ 60dB = ±3.0dB Typ
ATTENUATION
ACCURACY
0dB to 20dB = ±1.0dB Typ
20dB to 40dB = ±1.5dB Typ
40dB to 60dB = ±2.0dB Typ
SURVIVAL POWER
2 Watt AVERATE
-65ºC to + 25ºC
SWITCHING TIME
1µS Typ
DC POWER
+/- 15VDC @ 100mA Max
34
DIGITALLY TUNED ATTENUATORS
PMI MODEL DTA-2G18G-60-CD-1
Delay On:
820.00nS
Delay Off:
262.00nS
35
DIGITALLY TUNED ATTENUATORS
PMI MODEL DTA-0R5G4G-60-CD-1
PARAMETERS
SPECIFICATIONS
FREQUENCY
0.5 to 4.0 GHz
ATTENUATION RANGE
60dB
INSERTION LOSS
2.7dB Max
VSWR
1.8:1 Max
FLATNESS
@ 20dB = ±0.5dB Typ
@ 40dB = ±0.75dB Typ
@ 60dB = ±1.0dB Typ
ATTENUATION
ACCURACY
0dB to 20dB = ±1.0dB Typ
20dB to 40dB = ±1.5dB Typ
40dB to 60dB = ±2.0dB Typ
MINIMUM
ATTENUATION STEP
0.06dB
SURVIVAL POWER
2 Watt AVERATE
-65ºC to + 25ºC
SWITCHING TIME
1µS Typ
DC POWER
+/- 15VDC @ 100mA Max
36
DIGITALLY TUNED ATTENUATORS
PMI MODEL DTA-0R5G4G-60-CD-1
Delay On:
750.0nS
Delay Off:
262.0nS
37
SWITCH BIT ATTENUATOR
SAA-500M18G-20DB-SFF
Frequency Range
500MHz to 18GHz
Attenuation
20dB ± 2.75dB nominal
Insertion Loss
3.0dB max.
Switching Speed
100nsec max.
TTL Control
"1" = Insertion Loss
"0" = 20dB Attenuation
VSWR
2.0:1 max.
Input Power
+20dBm CW max.
DC Supply
+5V, 40mA typ. & -5V, 40mA typ.
Connectors
SMA (F)
Size
1.0" x 0.70" x 0.35"
Finish
Painted Gray
38
SWITCH BIT ATTENUATOR
SAA-500M18G-20DB-SFF
ATTENUATION & RETURN LOSS (IN/OUT)
39
Programmable, 60dB, DC to 2.0GHz,
Switch Bit Attenuator, SBA-DC2G-60DB-5V
PARAMETERS
SPECIFIED VALUE
Frequency Range:
DC to 2GHz
Individual Cell Attenuation
4dB, 8dB, 16dB, and 32dB
Total Attenuation
0 to 60dB
Attenuation Accuracy
±0.3dB or 1% to 1GHz
±0.5dB or 2% or 2GHz
Impedance:
50Ω
Switching Speed:
< 6ms
VSWR:
< 1.3:1 (17dB Return Loss)
Power Handling:
0.5W (27dBm) CW
Operating Voltage
5V
40
Programmable, 60dB, DC to 2.0GHz,
Switch Bit Attenuator, SBA-DC2G-60DB-5V
INSERTION LOSS TO 32dB – 0vdc to 5vdc
32dB TO INSERTION LOSS – 5vdc to 0vdc
41
3 - COUPLERS, DIVIDERS
& HYBRIDS
42
5.3 TO 6.0GHz, QUADRATURE COUPLER
PMI MODEL: QC-5D3G6G
Frequency Range
5.3 to 6.0GHz
Insertion Loss
1.0dB Maximum
Amplitude Balance
±0.7 dB Maximum
Phase Balance
±5.0 Degrees Maximum
Isolation
18dB Minimum
VSWR
1.4:1 Maximum
Impedance
50 Ohms
Connectors
SMA Male
Size
1.25" x 0.75" x 0.37"
Finish
Painted Gray
43
5.3 TO 6.0GHz, QUADRATURE COUPLER
PMI MODEL: QC-5D3G6G
J2-J3 PHASE 0 º IN REFERENCE TO J1-J4
J2-J4 PHASE 90 º IN REFERENCE TO J1-J4
44
0.5 to 18.0 GHz, POWER DIVIDER
APD-2-0518-YR1 Rev. B
PARAMETERS
SPECIFIED VALUE
Frequency Range
0.5 GHz – 18.0 GHz
Insertion Loss
0.5–8.0 GHz: 1.85dB Typ.
8.0–18.0 GHz: 3.5dB Typ
VSWR
0.5–8.0 GHz: 1.5:1 Typ.
8.0–18.0 GHz: 1.6:1 Typ.
Isolation
0.5–8.0 GHz: 16.5dB Typ.
8.0–18.0 GHz: 21.0dB Typ.
Amplitude Balance
0.5–8.0 GHz: ±0.2dB Typ.
8.0–18.0 GHz: ±0.45dB Typ.
Phase Balance
0.5–8.0 GHz: ±4° Typ.
8.0–18.0 GHz: ±5° Typ.
45
4-WAY POWER DIVIDER With 0º, 90º, 180º
& 270º Outputs PMI MODEL: PD-CD-001-1
SPECIFICATIONS:
• Frequency
0.3 to 9.9 GHz
• Phase Balance ±7º Max.
• Amp Balance
±0.5dB Max.
• Insertion Loss
8dB Max.
• RF Input Power 28W CW
• VSWR
2.0:1 Max.
J2 0º
J3 90º
J1
RF IN
J4 180º
J5 270º
46
4-WAY POWER DIVIDER With 0º, 90º, 180º
& 270º Outputs PMI MODEL: PD-CD-001-1
Phase, Reflection Coefficient & Insertion Loss
J1-J2
J1-J5
J1-J3
J1-J4
47
4-WAY AMPLIFIED POWER DIVIDER
PMI MODEL: APD-4-20M6G-28V
PMI MODEL NUMBER APD-4-20M6G-28V IS A 4-WAY AMPLIFIED
POWER DIVIDER MODULE FOR USE OVER THE FREQUENCY
RANGE OF 20 MHz TO 6.0 GHz WITH 3.5 dB OF GAIN, AND A
TYPICAL OUTPUT P1dB OF 9 dBm. THIS MODEL IS DESIGNED TO
HAVE A LOW NOISE FIGURE OVER A BROAD FREQUENCY RANGE.
Frequency Range
20 MHz to 6.0 GHz
Gain
3.5 dB, ±2 dB max
VSWR
2.5:1 max
Noise figure
5.5 dB (70 to 3000 MHz) max
6 dB (20 to 6000 MHz) typ
Output Power P1dB
10 dBm (20 to 3000 MHz) typ
9 dBm (3.0 to 6.0 GHz) typ
Input Power
33 dBm max (Survival)
Power Supply
+28 V @ +20 mA max
Size
2.00" x 2.00" x 0.40"
Finish
Painted Blue
48
4-WAY AMPLIFIED POWER DIVIDER
PMI MODEL: APD-4-20M6G-28V
49
8-WAY, POWER DIVIDER
PMI MODEL: APD-8-30M6G-SFF
PMI MODEL APD-8-30M6G-SFF is a 30 MHz to 6.0 GHz amplified 8 way power divider
module. This module provides a nominal insertion loss of 6 dB with a typical flatness of ±1
dB over the operating frequency range. Over 36 dB of reverse isolation is provided with a
typical noise figure of 6.5 dB and an input 1 dB compression of -2.5 dBm. Input and Output
VSWR is less than 2.0:1 into 50 OHM impedance. The DC supply required is +12 to +15
volts and current draw is typically 48 mA. Field removable SMA female connectors are
utilized in a housing measuring 4.5” x 4.3” x 0.5”.
Frequency Range
30 MHz to 6.0 GHz
Outputs (J1-J8) to input (J9)
Isolation
32 dB min.
36 dB nominal
Insertion Loss
4 dB min.
6 dB nominal
8 dB max.
Insertion Loss Flatness
±1 dB typ.
Noise Figure
6.5 dB typ.
VSWR (In/Out)
2.0:1 max.
Input P1 dB
-2.5 dBm typ.
Power Rating
+10 dBm max.*
Connectors In/Out
SMA(F)
DC Voltage
+12 to +15 VDC @ 100 mA nominal
Finish
Painted Blue
50
8-WAY, POWER DIVIDER
PMI MODEL: APD-8-30M6G-SFF
Typical Insertion Loss vs VSWR
Ins. Loss
6.5dB Worse Case
Typical Port to Port Isolation
13dB Typ.
VSWR 2.0:1 Max
51
8-WAY, 40 WATT POWER DIVIDER
PMI MODEL: APD-8-3D13D5-40W-SF
PMI MODEL APD-8-3D13D5-40W-SFF IS A 3.1 GHz TO 3.5 GHz 8-WAY POWER DIVIDER
THAT OFFERS MAXIMUM INSERTION LOSS OF 0.6 dB WITH 23 dB MINIMUM PORT TO
PORT ISOLATION. THIS POWER DIVIDER IS PORT TO PORT PHASE MATCHED
WITHIN ±2°. FIELD REMOVABLE SMA FEMALE CONNECTORS ARE OFFERED IN A
HOUSING MEASURING 4.10” x 2.15” x 0.44”.
Frequency Range
3.1 to 3.5 GHz
Insertion Loss
<= 0.6 dB - Measured 0.27
Isolation
>= 23 dB - Measured 23.60
VSWR
Input: <=1.3:1 - Measured 1.21:1
Output: <=1.2:1 - Measured 1.15:1
Amplitude Balance
<= ±0.2 dB - Measured -0.07, +0.01
Phase Balance
<=2° - Measured 0.65°, +1.29°
Power Handling
Forward <= 40 Watt
Reversed <= 1 Watt
Impedance
50 Ohms
Port Connectors
SMA(F)
Finish
Painted Blue
52
8-WAY, 40 WATT POWER DIVIDER
PMI MODEL: APD-8-3D13D5-40W-SF
PMI MODEL APD-8-3D13D5-40W-SFF IS A 3.1 GHz TO 3.5 GHz 8-WAY POWER DIVIDER
THAT OFFERS MAXIMUM INSERTION LOSS OF 0.6 dB WITH 23 dB MINIMUM PORT TO
PORT ISOLATION. THIS POWER DIVIDER IS PORT TO PORT PHASE MATCHED
WITHIN ±2°. FIELD REMOVABLE SMA FEMALE CONNECTORS ARE OFFERED IN A
HOUSING MEASURING 4.10” x 2.15” x 0.44”.
53
4 - DLVAs, ERDLVAs & SDLVAs
54
CW Immune, Extended Range DLVA
ERDLVA-218-CW-LPD-100
Frequency Range
Frequency Flatness
TSS
2.0 to 18.0GHz
±2.0 dB max.
-64dBm min.
Maximum Noise
100mV RMS with input terminated
VSWR:
2.0:1 max.
+30dBm CW
+50dBm Peak Pulse, 1% Duty Cycle, 10usec
Maximum Input Power (No Damage)
Log Slope
77mV/dB (±5mV) into a 100 Ohm Load
Video Output Range
-0.5V (-60dBm) < RF IN < 5.5V (4dBm)
DC Offset
Log Range
.±150mV
-60 to +4dBm min.
±1.5dB (-20°C to +85°C) max.
±1.75dB (-54°C to +95°C) max.
200nsec to 20usec
30nsec
35nsec max. (20nsec typ)
50nsec
500nsec max (200nsec typ)
Log Linearity
Pulse Range
Propagation Delay
Rise Time
Settling Time to ±1dB
Recovery Time
Duty Cycle
80% at maximum pulse width
50% at minimum pulse width
CW Immunity Range
Pulse Considered "CW"
Baseline Shift
Rejection Time
Droop
Power Supply
Maximum DC Power
Weight
Reliability @ +95°C
Package
TSS to -40dBm
900usec
25mV max.
1msec
1dB max.
±10.8V to ±12.5V
3.9 watts (Both supplies)
8oz max (3 oz. typ)
>75,000 hours
Hermetically sealed
Finish
Mil-Spec Epoxy Paint, Gray Color
55
CW Immune, Extended Range DLVA
ERDLVA-218-CW-LPD-100
ERDLVA-218-CW-LPD-100
Into a 100Ohm Load
Tabulated Data
56
CW Immune, Extended Range DLVA
ERDLVA-218-CW-LPD-100
ERDLVA-218-CW-LPD-100
Into a 100 Ohm Load
Propagation Delay @ 10GHz
TSS @ 10GHz into 99.01 Ohm Load
57
CW Immune, Extended Range DLVA
ERDLVA-218-DC-LPD
Frequency Range
2.0 to 18.0GHz
Logging Range
-60 to +4dBm
TSS
-64dBm max
Logging Slope
+85mV/dB
Logging Linearity
±0.5dB typ, ±1.0dB max
Flatness
±1.5dB
Output Stability
±1.0dB
Pulse Width Range
50nsec to CW
Input VSWR (50 Ohms)
3.0:1 max
Video Load Impedance
75 Ohms
Video Rise Time
20nsec
Recovery Time
500nsec
DC Power
+12 to +15VDC @ 190mA max
-12 to -15VDC @ 100mA max
58
CW Immune, Extended Range DLVA
ERDLVA-218-DC-LPD
TSS @ -67dBm @ 25ºC
59
PMI MODEL: GMDA-CW0518-30
Detector Log Video Amplifier (DLVA)
Frequency Range
0.5 to 18.0GHz
Output Voltage Flatness
±0.5V Across the band
TSS
Video Test Output
DC Offset of Test Output
Impedance
Log Slope
Input Power -40 to -10dBm
-43dBm min (10MHz Video Bandwidth)
Fixed 450mV ±100mV
+1.2V ±10%
Meet all requirements with 50 OHM load
Input Power -10 to 0dBm
Input Power 0 to +20dBm
280mV/dB with ±12mV/dB tolerance
Transition from 280mV/dB tolerance
0mV/dB with ±12mV/dB tolerance
Log Linearity
Input Power -40 to -10dBm
Input Power -10 to 0dBm
Input Power 0 to +20dBm
Input Power
Input VSWR
Output Impedance
Output Load
Minimum Input Pulse Width
Maximum Pulse Width
Rise Time(10% to 90%)
±1.0dB
Transition from 280mV/dB to 0mV/dB
±1.0dB
+25dBm CW max (no damage)
2.5:1 (-40dBm to -10dBm)
1K OHM
1M OHM
100ns
150us
50ns max, Measured at input of -35dBm
Recovery Time
5us max, At input pulse of -10dBm with pulse width of 150
us
DC Offset
+1.35V ±10%
Dynamic Range
63dB (-43 to +20dBm)
Power Supply
+15V ±0.15V @ 75mA
-15V ±0.15V @ 75mA
Connectors
SMA(F)
Size
2.3" x 2.3" x 0.47"
Finish
Nickel Plating
60
DETECTOR LOG VIDEO AMPLIFIER (DLVA)
PMI MODEL: PLVA-500M18G-50
PARAMETERS
SPECIFICATIONS
FREQUENCY
500MHz to 18GHz
FREQUENCY FLATNESS
±1.0dB Max
LOGGING RANGE
-40 to 0dBm Min
USEFUL RANGE
-40 to =5dBm
LOG LINEARITY ERROR
±0.5dB Max @ 25C
±1.0dB Average
(-54C to +85C)
LOG SLOPE
50mV/dB
±4% of Average Slope
TEMPERATURE STABILITY
±1.0dB Max
(-54C to +85C)
PULSE RESPONSE
50nS to CW
RISE TIME
20nS Max
SETTLING
45nS Max
RECOVERY TIME
150nS Typ
300nS Max
TSS
-42dBm Min
VSWR
3.0:1 Max
Max RF INPUT
+15dBm
DC Power Supply
±12VDC @ 75mA Max
61
DETECTOR LOG VIDEO AMPLIFIER (DLVA)
PMI MODEL: PLVA-500M18G-50
Log Transfer vs. Frequency @ +25ºC
Rise / Fall & Settling Times @ +25ºC / 0dBm IN @ 18 GHz
62
40dB, SUCCESSIVE DETECTION LOG
VIDEO AMPLIFIER (SDLVA)
PMI MODEL: SDLVA-8G18G-40-5-SFF
•
•
•
•
•
8.0 to 18.0 GHz SDLVA
40dB Dynamic Range
Hermetically Sealed
Miniature
1.2” X 0.85” X 0.40”
PARAMETERS
SPECIFICATIONS
Frequency Range
8 to 18 GHz
Frequency Flatness
±2.0dB
Log Linearity over
Temperature
±1.0dB
Pin=-30dBm
@ -54C to +85C
Logging Range
-40 to +0dBm
Input VSWR
2.5:1 Max
Max RF INPUT POWER
+10dBm CW
Log Video Output Voltage
10mV to 2.25V
Log Video Output Slope
50mV/dB
Log Video Output Rise Time
25nS Max @ 20dBm
Log Video Output Fall Time
30nS Max @ 20dBm
Log Video Recovery time
40nS Max @ 20dBm
DC Power Supply
+5VDC @ 130mA
Max
63
40dB, SUCCESSIVE DETECTION LOG
VIDEO AMPLIFIER (SDLVA)
PMI MODEL: SDLVA-8G18G-40-5-SFF
LOG TRANSFER AND RISE / FALL TIME @ +25ºC & 0dBm
64
18GHz to 40GHz, 65dB, 60nS Recovery,
Successive Detection Log Video Amplifier (SDLVA)
PMI MODEL: SDLVA-18G40G-65-CD-292FF
Frequency Range
TSS
Input Power Handling
Video Log Range
Video Log Linearity
Video Log Slope
Video Log Intercepts
Video Output at 2dBm
Video Output at -63dBm
1940mV max
1476mV max
280mV max
65mV min
Video Frequency Flatness
+/-2.5dB max @ 25ºC
Pulse Width Range
Video Rise Time
Recovery Time
20ns to CW
11nS (8nS typ)
60nS (40nS typ)
15nS (5nS typ)
7nS over temp typ
Delay Time
VSWR 2.34:1 @ 25C & -20dBm
18.0 to 40.0GHz
-65dBm @ 25ºC
10dBm max
-63dBm to +2dBm
+/- 2.0dB @ 25ºC
+/-3.0 over temp
25mV/ dB nom
Video Output Impedance
50 ohms
Input VSWR (50 ohms)
2.5:1
DC Power Supply
*Note: Do not supply +V without -V
supplied as well as this may destroy the unit
+12V @ 400mA
-12V @ 200mA
Size
Finish
2.37" x 1.8" x 0.42"
Nickel Plate per SAE AMS 2404
65
18GHz to 40GHz, 65dB, 60nS Recovery,
Successive Detection Log Video Amplifier (SDLVA)
PMI MODEL: SDLVA-18G40G-65-CD-292FF
LINEARITY ERROR vs INPUT POWER
TSS @ +25C = -68dBm
VIDEO OUT vs INPUT POWER
RISE 10ns @ +25C/+2dBm
RECOVERY 60ns @ +25C/+2dBm
DELAY 14ns @ +25C/+2dBm
66
PMI MODEL: SDLVA-3G18G-CW-70-MAH
CW-IMMUNE, SUCCESSIVE DETECTION LOG
VIDEO AMPLIFIER (SDLVA)
PMI Model No: SDLVA-3G18G-CW-70-MAH is a CWImmune Successive Detection Log Video Amplifier
operating in the 2.0 to 18.0GHz frequency band. It
features an SPST on the RF output which allows for the
RF to be blanked when the RF input signal is below the 64dBm threshold. In addition to RF blanking, a 3.3V
TTL-compatible output is also provided for time-gating or
sampling to assist in digital system integration.
Frequency Range
Frequency Flatness
TSS
Limited Output Power
VSWR
Linear Output Gain
Linear Output Psat
2.0 to 18.0GHz
±2.0 dB max.
-68dBm min., -70dBm typ
6.5dBm ±3.0dB max.
2.0:1 max
43db ±3.0dB max.
3dBm ±3.0dB max.
V0 (Video Comparator Signal Amplitude)
3.3V typ
Video Comparator Delay
50ns typ
Video Comparator Threshold Level
-64dBm ±3.0dB max.
V1 (Log Video Signal Amplitude)
1 Volt max
Log Slope
10mV/dB into a 50 ohm Load (±1mV) max
Log Range
-65 to +5dBm min
Log Linearity
±1.75dB ( -40ºC to +85 ºC) max
Pulse Range
Rise Time
Settling Time to ±1dB
Recovery Time
100ns to 250 us
35ns max
50ns typ
200ns max (150ns typ)
CW Immunity Range
TSS to -45dBm (1dB degradation)
Pulse Considered "CW"
1ms typ
Rejection Time
Droop
SPST Isolation
SPST Switch Speed
Power Supply
Connectors
Finish
Size
1ms typ
1dB max
70dB typ
20ns typ
±12 VDC to ±15 VDC
SMA Female
Gold
2.30" x 2.20" x 0.36"
67
PMI MODEL: SDLVA-100G18G-CW-70-MAH
CW-IMMUNE, SUCCESSIVE DETECTION LOG
VIDEO AMPLIFIER (SDLVA)
PMI Model No. SDLVA-100M18G-CW-70-MAH is a CW-Immune,
Successive Detection Log Video Amplifier operating in the
100MHz to 18.0GHz frequency band. It features an SPST on the
RF output which allows for the RF to be turned off when the RF
signal is below the adjustable threshold setting. In addition, the
output switch can be controlled externally by enabling the
external trigger. Furthermore, an LVTTL output is provided for
time-gaiting or sampling to assist in digital system integration.
68
PMI MODEL: SDLVA-100G18G-CW-70-MAH
CW-IMMUNE, SUCCESSIVE DETECTION LOG
VIDEO AMPLIFIER (SDLVA)
Frequency Range
Frequency Flatness
TSS
TYPICAL VIDEO OUTPUT vs INPUT POWER
ALL TEMPERATURE LEVELS
100MHz to 18.0GHz
±2.0 dB max.
-68dBm min., -70dBm typ
Limited Output Power
8.0dBm ±3.0dB max. (Input Power >= -65dBm)
VSWR
Linear Output Gain
Linear Output Psqt
2.0:1 max
43db ±3.0dB max.
3dBm ±3.0dB max.
V0 (Video Comparator Signal Amplitude)
3.3V typ
Video Comparator Delay
50ns typ
Video Comparator Threshold Level
Adjustable with Analog Voltage
-60dBm ±3.0dB max.
V1 (Log Video Signal Amplitude)
1 Volt max
Log Slope
10mV/dB into a 50 ohm Load ±1mV max
Log Range
-65 to +5dBm min
Log Linearity
±1.75dB ( -40ºC to +85 ºC) max
Pulse Range
Rise Time
Settling Time to ±1dB
Recovery Time
100ns to 250 us
35ns max
50ns typ
350ns max
CW Immunity Range
TSS to -45dBm (1dB degradation)
Pulse Considered "CW"
1ms typ
Rejection Time
Droop
SPST Isolation
SPST Switch Speed
1ms typ
1dB max
70dB typ
20ns typ
SW CTL A (Enable)
LVTTL 0: Internal Comparator Triggered SPST
LVTTL 1: External Trigger Enable (SW CTL B)
SW CTL B (Trigger)
LVTTL 0: SPST Switch On (Insertion Loss)
LVTTL 1: SPST Switch Off (Isolation)
Power Supply
Connectors
Finish
Size
±12 VDC to ±15 VDC
SMA Female
Gold
2.30" x 2.20" x 0.36"
69
PMI MODEL: SDLVA-2020-OPT112
1.0 to 12.0GHz, SUCCESSIVE DETECTION LOG
VIDEO AMPLIFIER (SDLVA) with DIGITAL
LOG VIDEO OUTPUT
Frequency Range
1.0 to 12.0GHz
Frequency Flatness
±2.0dB typ, ±2.5dB max
TSS
-65 dBm max
VSWR
3.0:1 max (@ -20 dBm)
Logging Range
-65dBm to -35dBm
Log Linearity
±1.75 dB Maximum (-65dBm to -35dBm)
Log Slope
5 LSB/dB nominal
Log Temperature Stability
±1.75dB (0°C to 60°C)
Rise Time (10% to 90%)
20nS max
Recovery Time
200nS max
Output Power
+10dBm ±2.5dB typ
Power Supply
+12V @ 700mA max
-12V @ 200mA max
Size
3.5" x 3.0" x 0.5"
Finish
Painted Blue
ADC Clock Rate(J4)
100MHz
Digital Log Video Output
8-Bit LVTTL
LVTTL Logic Output
3.3V typ
LVTTL Comparator Delay
50ns typ
LVTTL Threshold Level
Adjustable (Analog)
-60dBm ±3dB typ
Lowest Level
Video Output
8 Bit 3.3 V LVTTL
Power/ Logic Connector
15 Pin Micro-D Male
70
PMI MODEL: SDLVA-2020-OPT112
1.0 to 12.0GHz, SUCCESSIVE DETECTION LOG
VIDEO AMPLIFIER (SDLVA) with DIGITAL
LOG VIDEO OUTPUT
VIDEO OUTPUT vs INPUT POWER
OUTPUT POWER PLOT @
-65 dBm INPUT POWER
OUTPUT POWER PLOT @
-35 dBm INPUT POWER
71
PMI MODEL: SDLVA-218-44-70MV
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA)
PMI Model No. SDLVA-218-44-70M is a Detector Log Video
Amplifier (DLVA) designed to operate over the 2.0 to 18.0GHz
frequency range. This model offers a logging range of -40 to +4dBm
having a log slope of 70mV / dB. The logging linearity is better than
±0.75dB and the rise time is 25nsec maximum and the fall time
300nsec maximum. This model operates on ±15VDC and is
supplied in a small housing measuring only 2.2" x 1.5" x 0.4".
Frequency Range
Logging Range
TSS
Logging Slope
2.0 to 18.0GHz
-40 to +4dBm
-42dBm max
+70±3mv/dB maximum
Logging Linearity @ +25C
±0.75dB maximum (-40 to 0dBm)
Flatness
±1.5dB maximum
Maximum Input Power
+20dBm
Video Load Impedance
50 ohms
Video Rise Time
Video Fall Time
Recovery Time
Pulse Width Range
25nsec maximum
300nsec maximum
500sec maximum
50nsec to CW minimum
DC Offset at RF Terminated
±70mV maximum
Noise at RF Terminated
150mV P-P maximum
Mode
DC Coupled
Primary Power
+15VDC @ 200mA maximum
-15VDC @ 150mA maximum
Size
Finish
2.2" x 1.5" x 0.4"
Gold Plated
72
PMI MODEL: DLVA-2G4G-45-70-CD-1
DETECTOR LOG VIDEO AMPLIFIER (DLVA)
PMI Model No. DLVA-2G4G-45-70-CD-1is a detector log video
amplifier (DLVA) that operates between the 2.0 to 4.0GHz
frequency range. It has a dynamic range of 45dB, a log slop of
70mV/dB and a nominal video bandwidth of 14MHz. Furthermore,
the DLVA has features that can convert any incoming signal ranging
from 50ns to CW to a pulsed output of 600ns. In addition, the DLVA
will not trigger an output with input pulse widths of 40ns or
less. This state of the art design utilizes cutting edge technology
which provides stunning performance and reliability in a compact
package making it an optimum solution for high speed channelized
receiver
Frequency Range
Input VSWR (50 Ohms)
Input Power Handling
Video Log Range
2.0 to 4.0GHz
1.92:1 (-10dB Max.)
+20dBm Max.
-30 to +15dBm
Video Log Linearity
±1.5dB @ 25°C
Video Log Slope
70mV/dB ±5mV/dB
Video Frequency Flatness
±1.5dB
Pulse Width Range
(50ns with little degradation in
performance)
(PW less than 40nS will not
trigger an output)
Video Output Impedance
Video Rise Time
Video Fall Time
Recovery Time
80ns to CW
100 Ohms
35ns Max.
200ns Max.
1.0us Max.
Settling Time
60ns Max.
Video Output Pulse Width
600ns ±200ns
Video Output Noise
60mV p-p
DC Supply
+12VDC @ 50mA
+5VDC @ 80mA
-12VDC @ 100mA
Size
3.035" x 0.91" x 0.35"
73
6.0 TO 18.0, 70dB, SUCCESSIVE DETECTION
LOG VIDEO AMPLIFIER (SDLVA)
PMI MODEL: SDLVA-6G18G-CD-1
•
•
•
•
•
•
•
•
6.0 to 18.0 GHz Frequency Range
70dB Dynamic Range
10nS Rise Time
60nS Recovery Time
MIL Temperature Range
Low Loss
Unconditionally Stable
Hermetically Sealed
74
6.0 TO 18.0, 70dB, SUCCESSIVE DETECTION
LOG VIDEO AMPLIFIER (SDLVA)
PMI MODEL: SDLVA-6G18G-CD-1
PARAMETER
SPECIFICATION
FREQUENCY RANGE
6.0 TO 18.0 GHz
PULSE RANGE
30nS to CW
INPUT POWER
+17 dBm CW Max
FLATNESS
±2.0dB Max
LOG LINEARITY
±2.5dB Max
LOG RANGE
-70 to +5 dBm
LOG SLOPE
25mV/dB (±5%)
VSWR
2.0:1 Max
RISE TIME
10nS Max
RECOVERY TIME
60nS Max
DC POWER SUPPLY
+15 VDC @ 350mA
-15 VDC @ 180mA
75
Successive Detection Log Video Amplifier
PMI MODEL: SDLVA-100M700M-70
Frequency Range
100 to 700MHz
Dynamic Range
55dB minimum, 60dB typical
Log Linearity
±1.2dB typ., ±1.2dB max. @ (-55dBm to 0dBm)
Log Linearity
±1.5dB typ., ±2.0dB max. @ (-60dBm to 0dBm)
Minimum Log Voltage
Maximum Log Voltage
VSWR Input
Tangential Sensitivity
-55dBm (-60dBm typ.)
0dBm (+10dBm typ.)
2.0:1 max. (1.5:1 typ)
-60dBm typical
Limited IF Output
-10dBm minimum, -5dBm typical
Maximum RF Input Power
+10dBm
Log Video Output Coupling
DC
Log Video Maximum Output Voltage
2.7 Volts
Log Video Output Rise Time
15ns typ., 25nsec max.
Log Video Output Fall Time
15ns typ., 30nsec max.
Log Video Output Settling Time
40ns maximum
Log Video Output DC Offset
0.1 Volts Nominal (Adjustable)
Log Video Output Slope
25mV/dB Nominal ±5mV/dB
Log Video Output Variation with Frequency
Log Video Output Variation with Temperature
±0.5mV/dB typ. (Over 80MHz RF Bandwidth)
±1mV/dB typ.
Log Video Propagation Delay
10ns Maximum, 7nS Typical
Log Video Load
100 ohms ±10%
DC Power (+V)
+12 to +12 Volts @ 100mA
DC Power (-V)
Size
Finish
-12 to -15 Volts @ 200mA
Note: Do not supply +V without -V supplied as
well as this may damage the unit
3.75 " x 1.50 " x 0.50"
Gold Plated
76
Successive Detection Log Video Amplifier
PMI MODEL: SDLVA-315M362M-65-CD-1
Frequency Range
Frequency Flatness
TSS
VSWR
Power Input
315 to 362MHz
±2.0 dB max.
-73dBm min.
1.5:1 max.
+17dBm max.
Log Slope
50mV/dB (±1.5mV/dB) 100 Ohm Load
Log Range
-65 to 0dBm (0.25V @ -65dBm and
3.5V @ 0dBm)
Log Accuracy
±0.75dB (+50ºC) max.
Log Accuracy
±1.5dB (0ºC to +77ºC) max.
Log Accuracy
Pulse Range
Rise Time
Fall Time
Recovery Time
Offset Adjust
Power Supply
±2.5dB (-33ºC to 0ºC) max.
100nsec to CW
35nsec
300nsec
500nsec
±0.4V typ.
±12V ±3%
Quiescent Power Dissipation
2 Watts max.
RF Connectors
Finish
Size
SMA(F)
Gold Plated
3.75" x 1.5" x 0.5"
77
6 to 18GHz, 70dB, Hermetically Sealed,
Detector Log Video Amplifier (DLVA)
PMI MODEL: DLVA-6G18G-50-HERM
Frequency Range
TSS
VSWR
6.0 to 18.0GHz
-72dB min.
2.0:1 max.
Video Output Range
0 to 2.2VDC (50 Ohm Load)
Maximum Video Output
2.4VDC
Input Power
Logging Range
Logging Accuracy
Log Slope
+20dBm CW max.
-70 to 0dBm
±4.0dB max.
25mV/dB (±10%)
Log Slope Intercept Point
At -70dBm RF Input, Output Voltage = 350mV
Pulse Range
100nsec to CW
Pulse Rise Time (10% to 90%)
50nsec max.
Pulse Overshoot
1dB max.
Pulse Fall Time (90% to 10%)
70nsec max.
Recovery Time
Delay Time
70nsec max.
15nsec max.
Power Supply
12VDC @ 265mA and -12V @ 95mA
Connectors
Size
SMA(F)
3.2 " x 2.05 " x 0.4"
78
80dB, Successive Detection Log Video Amplifier
PMI MODEL: SDLVA-61F-80, opt. 5829387-002
Input Characteristics:
Test Frequency:
Signal Range:
VSWR:
Transfer Characteristics:
Bandwidth:
Transfer Function:
Accuracy:
Output Characteristics:
Load Impedance
Coupling
Pulse Characteristics:
Rise Time:
Fall time:
Stability
Power Requirements:
Supply:
Ripple:
Connectors:
Input Signal:
Output Signal:
Power Connector:
61.25 MHz ±250 KHz
-80 dBm to 0 dBm
1.2:1 Maximum
6.0 to 8.6 MHz
The Output shall conform to the following transfer function:
E = 22.5 Pin + 200
Where
Pin = Input Power in dB Above -80 dBm
E = Output Voltage in Millivolts
The Output Voltage shall be E + 22.5 mV for any input in the signal range.
50 Ohms
Output Shall be DC Coupled to Load
117 nS Maximum
491 nS Maximum to fall from 2V to 0.2V for an input pulse with an amplitude of
0 dBm.
The unit shall be unconditionally stable (ie: Non-Oscillatory) under all operating
conditions as well as for a source and/or load VSWR of 1.5:1 Maximum. The
unit shall be unconditionally stable (ie: Non-Oscillatory) under all operating
conditions.
+15 VDC ± 1 VDC @ 100 mA Per Channel
-15 VDC ± 1 VDC @ 100 mA Per Channel
SMA Female
SMA Female
Cannon Type DEMM-9P or Equivalent with Screw Lock
79
80dB, Successive Detection Log Video Amplifier
PMI MODEL: SDLVA-61F-80, opt. 5829387-002
LOG TRANSFER @ 25ºc
80
2 to 18GHz, 40dB, Detector Log Video
Amplifier (DLVA)
PMI MODEL: HADA-D2002
Frequency Range
2.0 to 18.0GHz
TSS
-40dB Min.
VSWR (Input)
3.0:1 Max.
Logging Range
-40 to 0 dBm
Log Accuracy
±1.50dB Max @ 25ºC
Log Linearity
±0.50dB Max.
Frequency Flatness
±1.65dB Max.
Rise Time
30nS Max
Fall Time
100nS Max
Propagation Delay
60nS Max
Maximum RF Input
+23dBm
DC Offset
+95mV
Dimensions
2.5” X 1.5” X 0.44”, 150grms
81
2 to 18GHz, 40dB, Detector Log Video
Amplifier (DLVA)
PMI MODEL: HADA-D2002
82
5 - DTO’s
(DIGITALLY TUNED OSCILLATORS)
DRO’s (DIELECTRIC RESONANCE OSCILLATORS)
PLO’s (PHASE LOCKED OSCILLATORS)
FREQUENCY SYNTHESIZERS & FREQUENCY DOUBLERS
83
PHASE LOCKED OSCILLATOR
PMI MODEL No: PLO-1D6G-CD-2
PMI Model No. PLO-1D6G-CD-2 is a Phase Locked Oscillator with
an output frequency of 1.6GHz. This model provides minimum
output power of +14dBm with all spurs held to -60dBc and
harmonics held to -20dBc. The unit has a VSWR of <1.5:1 for all
phases and is supplied with SMA(F) connectors in a housing that
measures 2.75" x 2.75" x 0.75".
Output Frequency (fo) 1.6GHz
Output Power
+14dBm min, +18dBm max
Reference (fi)
100 ±0.01MHz, 0 ±3dBm
Spurious
-60dBc min
Harmonics
-20dBc min
Phase Noise
20 log(fo/fi) +6dB typ @10KHz-100KHz
-100 dBc/Hz min @ 100KHz
-120 dBc/Hz min @ 1 MHz
Lock Alarm
TTL "H" : Out of Lock
TTL "L" : Lock
Primary Power
+12 to +15.5VDC @ 370mA
-12 to -15.5VDC @ 100mA
RF Input/Output
SMA(F)
Size
2.75" x 2.75" x 0.75"
Finish
Painted Gray
Weight
280g (10 oz.) max
84
PHASE LOCKED OSCILLATOR
PMI MODEL No: PLO-1D6G-CD-2
Harmonics
Phase Noise
Carrier
Spurious
85
DIGITALLY TUNED OSCILLATORS (DTOs)
•
•
•
•
•
2.0 to 18.0 GHz
Modulation BW DC to 9 MHz
Phase Noise -60dBc/Hz
Harmonics -20dBc Max.
Spurious -55dBc Max.
86
DIGITALLY TUNED OSCILLATORS (DTOs)
•
•
•
•
Digitally Tuned up to 16 bit
0.5 MHz/1.0 MHz Resolution
Allows DC to 15 MHz Sine Wave Modulation
7 Frequency Bands Available including 2 to 18 GHz
87
DIGITALLY TUNED OSCILLATORS (DTOs)
Frequency RF Output
Settling
Power
(±MHz Max.
(dBm
within 1usec)
Min.)
Modulation
Bandwidth
(Min.)
Phase Noise
(dBc/Hz @
100kHz
Offset)
Harmonics
(dBc)
10
3.5MHz Min.
-60
-20
1.0
10
3.5MHz Min.
-60
-20
0.1
2.0
+10
DC - 9MHz
-60
-20
2.5
0.1
2.0
+10
DC to 9MHz
-60
-20
2.0 - 6.0
2.0
0.1
2.5
+2 to +8
DC to 14MHz
-65
-45
DTO-6G18G-CD-1
6.0 - 18.0
2.5
0.1
4.0
+10
DC to 10MHz
-60
-55
DTO-218-CD-1
2.0 - 18.0
2.0
0.1
3.0
+10
DC to 9MHz
-60
-20
Model Number
Frequency
Range (GHz)
Frequency
Accuracy
(±MHz)
Frequency
Drift
(±MHz/°C)
AUM-50M100M-DTOK-3R5MBW
0.05 - 0.1
2.0
< 0.1
1.0
AUM1001G-DTOK-3R5MBW
0.1 - 1.0
2.0
< 0.1
DTO-0R5G2G-CD-1
0.5 - 2.0
2.5
DTO-0R5G2D5G-CD-1
0.5 - 2.5
DTO-2G6G-CD-1
88
DIELECTRIC RESONANCE OSCILLATORS (DR0)
PMI Model: PIA-10G-CD-1
•
•
•
•
•
FREQUENCY
PHASE
OUTPUT
OUTPUT ADJUST
HARMONICS
10 GHz
360º Min.
+19dBm Typ
0 to 10dBm
-50dBc Typ
89
DIELECTRIC RESONANCE OSCILLATORS (DR0)
PMI Model: PIA-10G-CD-1
90
Phase Locked, Dielectric Resonator Oscillator
(with Internal Reference)
PMI Model: PIA-12D8G-CD-1
Frequency Output
12.8GHz
Power Output
+13dBm minimum
VSWR
1.4:1
Internal Reference
100MHz
Frequency Stability
±3 ppm
Spurious
-80dBc
Harmonics
-25dBc
Phase Noise @ Offset
-34dBc/Hz @ 1Hz
-65dBc/Hz @ 10Hz
-85dBc/Hz @ 100Hz
-108dBc/Hz @ 1kHz
-115dBc/Hz @ 10kHz
-120dBc/Hz @ 100kHz
-140dBc/Hz @ 1MHz
DC Voltage Supply
+15VDC
DC Current
300mA maximum
Phase Lock Alarm
TTL
Connectors
SMA Female
Finish
Nickel
Size
2.25" x 2.25" x 0.62"
91
Phase Locked, Dielectric Resonator Oscillator
(with Internal Reference)
PMI Model: PIA-12D8G-CD-1
<Power
Output
Harmonics >
<Phase Noise>
92
PMI MODEL: PFS-618-CD-1
HIGH SPEED FREQUENCY SYNTHESIZER
PMI Model No. PFS-618-CD-1 is a high speed frequency synthesizer
that operates over the frequency range of 6.0 to 18.0GHz. This model
covers the complete 6.0 to 18.0GHz frequency in 100kHz steps with an
output power of +10dBm minimum. The unit is accurate to within ±
1MHz and settles within 1usec maximum. This model features low
SSB Noise and a low spurious output of -55dBc maximum. Harmonics
are kept below -30dBc. Frequency Modulation is offered and has a
bandwidth of DC to 10MHz with ± 400MHz minimum at 100MHz /
volt. The package is compact in size and measures only 6.48" x 6.23"
x 1.6".
Frequency Range
6.0 to 18.0GHz
Frequency Step Size, Nominal (LSB)
100kHz
Power Output Level
Power Variation
Frequency Accuracy
Frequency Aging
Settling Time to 1MHz
+10dBm Min.
5dB P-P (±2.5dB) Max.
±1MHz Max.
±2 PPM / Year
1usec
Tuning Control
Binary, TTL 17 Bits (Parallel)
Tuning Speed
SSB Noise
@ 1kHz Offset
@ 100kHz Offset
@ 10MHz Offset
Spurious Output
Harmonics
Sub-Harmonics
Reference
1usec
6.0 to 18.0GHz Max.
-78dBc / Hz
-96dBc / Hz
-100dBc / Hz
-55dBc Max.
-30dBc Max.
-55dBc Max.
Internal Reference
Frequency Modulation
Modulation Bandwidth
DC to 10MHz
Frequency Deviation
±400MHz Min., 100MHz / Volt
Control
Sensitivity
Analog
1.1 : 1
Power Supply
Connectors
Control
Power
RF Output
Modulation Input
Size
+12V @ 2.5A Max. (1.4A measured)
-12V @ 0.6A Max. (0.1A measured)
+5V @ 4A Max (1.6A measured)
-5V @ 2A Max. (0.1A measured)
37 Pin Sub-D Male
9 Pin Sub-D Male
SMA Female
SMA Female
6.48" x 6.23" x 1.6"
93
PMI MODEL: PFS-618-CD-1
HIGH SPEED FREQUENCY SYNTHESIZER
94
PMI MODEL: PFS-618-CD-1
HIGH SPEED FREQUENCY SYNTHESIZER
TYPICAL OBSERVED RESULTS:
Typical Settling Time to 18GHz
(Shown @ 10GHz)
Phase Noise
(Shown @ 9GHz)
Full Frequency Range Carrier
(Shown @ 14GHz)
8V P-P 10MHz Modulation
(Shown @ 9GHz)
95
ACTIVE, FILTERED, FREQUENCY DOUBLER MODULE
PMI MODEL: PFDM-3R66R65-13-7R5DC-SFF
Specifications:
• RF Input (GHz)
3.6 to 6.65 GHz
• RF Output (GHz)
3.6 to 13.3 GHz
• RF Input Power
0 to +4 dBm
• RF Output Power (MAX)
+10dBm
• Attenuation Range (dB)
10dB
• Harmonic Rejection (dBc)
-25dBc
• Sub Harmonic / Multiple
Harmonic Rejection (dBc)
-65dBc
• Current Draw @ +7.5vdc
600mA
• Output Switching Speed
<20nSec.
• VSWR In/Out
2.0:1
• Isolation between Outputs
>35dB
• Operating Temp
-10 to +65ºC
• Size
3.0” X 1.5” X 0.375”
96
6 - FILTERS & DIPLEXERS
97
18 TO 40GHz, LOW LOSS DIPLEXER
PMI MODEL No: 2SFB-8G26G-CD-SFF
Insertion Loss (Passband)
2dB max
VSWR (Passband)
2.5:1 max
Diplexer K Band 1dB Passband
18.0GHz, Min, 25.0GHz max
Diplexer Ka Band 1dB Passband
28.0GHz min, 40.0GHz max
Crossover Band
25.0GHz min, 28GHz max
Crossover Excess Attenuation
5dB typ
Stopband Attenuation
60dB
K Band (Stopband)
32.0GHz - 46.0GHz
Ka Band (Stopband)
DC - 22.0GHz
Connectors Input/Output
2.92mm(F)
Size
0.80" x 0.60" x 0.38"
Weight
0.5oz typ
Finish
Painted Blue
98
18 TO 40GHz, LOW LOSS DIPLEXER
PMI MODEL No: 2SFB-8G26G-CD-SFF
K-BAND: (10dB Scale)
INSERTION LOSS, VSWR, & REJECTION
CROSSOVER OF K & Ka BANDS (10dB Scale)
Ka-BAND: (10dB Scale)
INSERTION LOSS, VSWR, & REJECTION
99
11.5 to 16.5GHz Diplexer
PMI Model No: 11DP-11R5/16R5-CD-SFF-1
Center Frequencies, Fo
Filter #1: 11.5GHz
Filter #2: 16.5GHz
Passband Frequencies
Filter #1: 10.75 to 12.25GHz
Filter #2: 15.75 to 17.25GHz
Passband Insertion Loss
3dB max.
Passband VSWR
1.5:1 max.
Rejections
Filter #1: -50dBc @ 10.25GHz & -75dBc @ 13.75GHz
Filter #2: -50dBc @ 17.75GHz & -75dBc @ 14.25GHz
Size
3.5"L x 1.4"W x 0.5"H
Connectors In / Out
SMA(F) - Field Removable
Finish
No Paint - Silver Plated
100
11.5 to 16.5GHz Diplexer
PMI Model No: 11DP-11R5/16R5-CD-SFF-1
BAND PASS FILTER #1 NARROW-BAND PLOT
BAND PASS FILTER #2 NARROW-BAND PLOT
101
PMI MODEL: BPF1370-50-CD-TNCMF-LK
6 WATT BANDPASS FILTER, 2dB LOSS
REJECTION
Center Frequency, Fo
1370MHz
1dB Bandwidth
50MHz
Ultimate Stopband Rejection
60dBc minimum
Insertion Loss
Less than 2dB
Stopband Cutoff
800 to 1200MHz
-Lower
1312MHz or higher at 30dB
-Upper
1434MHz or lower at 30dB
RF Input Power
6 Watts at 10% Duty Cycle
Connectors
TNC - Male (Input) &
TNC - Female (Output)
Finish
Painted Gray
Size
2.25" x 1.0" x 0.75"
102
PMI MODEL: HPF-130-140-NFF-50W
50 WATT, HIGH PASS FILTER
Passband
130 to 550MHz
-1dB Cut-Off Frequency
130MHz
Passband Insertion Loss
1.0dB
Passband VSWR
2.0:1
Rejection
-80dBc @ 90MHz
Operating Input Power
50 Watts CW max.
Impedance
50 Ohms
Size
6.0"L x 2.0"W x 1.5"H
Connectors In/Out
N(F)
INSERTION LOSS & RETURN LOSS
103
PMI MODEL: 4BP160-5-2A-PP
160 MHz, LC BANDPASS FILTER
Center Frequency
160MHz, +/-0.23%
3dB Bandwidth
5MHz, +/-5%
VSWR in the Pass Band
1.5:1 max
Pass Band Insertion Loss 10dB nom
Rejection
4 Section Response
Connectors In/Out
PC Pins
Size
1.2" x 0.31" x 0.31"
104
PMI MODEL: BP13G-10G-CD-SFF
8 TO 18 GHz, SUSPENDED SUBSTRATED
BANDPASS FILTER
Passband Frequency
8.0 to 18.0GHz
Passband Insertion Loss
1.5dB typical, 2.5dB max.
Passband VSWR
2.0:1 max.
Rejection
70dB typ. at DC to 6GHz
60dB typ. at 20 to 23GHz
Connectors
SMA - Female (Field Removable)
Size
1.94"L x 0.76"W x 0.5"H
Finish
Gold Plated
INSERTION LOSS / RETURN LOSS / GROUP DELAY
& PHASE LINEARITY
105
18 to 26.5GHz, HIGH PASS FILTER
PMI MODEL: HPF18G-DC15G
Passband
18.0 to 26.5GHz
Insertion Loss (Passband)
1.5dB max
VSWR (Passband)
2.0:1 max
Rejection DC - 15.0GHz
60dB
Connectors
2.92mm(F)
Size
0.64" x 0.58" x 0.38"
Weight
0.5oz typ
Finish
Painted Blue
INSERTION LOSS, VSWR & REJECTION
106
DC to 26.5GHz, LOW PASS FILTER
PMI MODEL: LPF26R5-28R5G40G
Passband
DC to 26.5GHz
Insertion Loss (Passband)
1.5dB max
VSWR (Passband)
2.1:1 max
Rejection 28.5 to 40GHz
25dB Typ.
Ripple
±0.75dB max
Connectors
2.92mm(F)
Size
0.45” X 0.38” X 0.50”
Weight
0.5oz typ
Finish
Painted Blue
INSERTION LOSS, VSWR & REJECTION
107
6 to 18GHz RF FILTER/DETECTOR
PMI Model No: RFFD-618-730049
PMI MODEL RFFD-618-730049 IS A 6 TO 18GHz LOW PASS FILTER COMBINED
WITH A SCHOTTKY BIASED DETECTOR INCLUDING A REVERSE VOLTAGE
PROTECTION DIODE, A DUPLICATE DETECTOR AND PROTECTION DIODE IS
INCLUDED FOR DC OFFSET VOLTAGE COMPENSATION.
Frequency Range
6 to 18GHz
Return Loss
-10dB
Maximum Input Power
7dBm Operational
20dBm Survival
Filter Rejection
23dB min. (20 to 26GHz)
Voltage Sensitivity
80 to 140mV
Barrier Potential
225 to 270mV with 100uA bias to +25
Deg. C
Operating Dynamic Range
-23 to +7dBm
Frequency Flatness
±0.8dB with 1dB to 2dB typical slope
Diode Voltage Protection
1.0V max. at 30mA
Tracking Detector-Balance
±20mV max. over operating
temperature
Connectors:
RF Input: Filed Replaceable
Video Output : Fiel d Replaceable
DC Connections
SMA(M)
SMA(F)
Feed-thru Solder Pins
Size
1.60" x 1.59" x 0.6"
108
7 - FORM, FIT & FUNCTION
PRODUCTS
109
FORM, FIT & FUNCTION PRODUCTS
If you can not find the required components due to parts obsolescence please contact us. We
offer form, fit, and function replacement parts for any system. If a Source Control Drawing (SCD)
is available we can offer a complete solution to meet all of the given electrical, mechanical and
environmental specifications.
Specializing in aftermarket technology manufacturing and support for discontinued RF
components, electronic circuits, digital circuits and Integrated circuits, PMI has the technical
expertise to manufacture, supply and support these requirements. We are dedicated to assuring
our customer base that older discontinued products will continue to be available.















IF & RF LOG AMPLIFIERS
VARIABLE GAIN AMPLIFIERS
SUCCESSIVE DETECTION LOG VIDEO AMPLIFIERS (SDLVA’s)
BI-PHASE MODULATORS
PHASE SHIFTERS
I & Q VECTOR MODULATORS
FREQUENCY DISCRIMINATORS
FILTERS
DIPLEXERS & MULTIPLEXERS
SWITCH FILTER BANKS
SUPERCOMPONENTS, SUBSYSTEMS AND SYSTEMS
SMT VOLTAGE REGULATORS
DIGITAL CIRCUITS
TO-8, OP-AMS
PLO's, DRO's, and DTO's
110
8 - IFMs & FREQUENCY
DISCRIMINATORS
111
PMI MODEL: FD-30M-6M-1515-1
FREQUENCY DISCRIMINATOR
Specifications:
Frequency Range
12 to 18 GHz
VSWR Input
2.0:1 Maximum
1.5:1 Typical
Operating Input Power
+10 dBm Nominal, ±0.1
dBm
Video Impedance
100 Ohms Nominal
Video Output Rise Time
20 nS
Video Output Slope
50 mV/GHz
Frequency Discriminator Accuracy
±200 MHz
RF Input Power, Survival
+15 dBm
Power Plus
+15 VDC @ +75 mA
Power Minus
-15 VDC @ -75 mA
Size
2.00" x 1.80" x 0.50"
Weight
<4 Ounces
112
PMI MODEL: FD-0618-10 OPT. 1218
12 to 18GHz, FREQUENCY DISCRIMINATOR
VIDEO RISE & FALL
113
PMI MODEL: FD-30M-6M-1515-1
FREQUENCY DISCRIMINATOR
Center Frequency
30MHz
Peak to Peak Bandwidth
10MHz min.
Linear Bandwidth
6MHz min.
Sensitivity
1000mV/MHz ± 5% Into 50 Ohms
Linearity
± 5%
Input VSWR
2.0:1 max.
Input Dynamic Range
-10 to 0dBm
Rise Time
120nsec max.
Pulse Width
1usec min.
Pulse Repetition
1kHz
Positive DC Supply
+15 VDC @ 200mA max.
Negative DC Supply
-15 VDC @ 100mA max.
Size
4.625" x 1.50" x 0.47"
Finish
Painted Gray
114
PMI MODEL: FD-30M-6M-1515-1
FREQUENCY DISCRIMINATOR
Video Output @ 35MHz, with RF Pulse
Typical Input VSWR @ -10dBm Input Power
Rise Time @ 35MHz
115
PMI MODEL: FD-0518-10 Option 118
6 CHANNEL, FREQUENCY DISCRIMINATOR
SPECIFICATIONS:
FREQUENCY RANGE:
1.0 to 18.0 GHz
OUTPUT CHANNELS:
Ch1 1.0 to 2.0 GHz
Ch2 2.0 to 4.2 GHz
Ch3 4.2 to 6.1 GHz
Ch4 6.1 to 8.7 GHz
Ch5 8.7 to 12.5 GHz
Ch6 12.5 to 18.0 GHz
INPUT VSWR:
2.0:1
OUTPUT VOLTAGE:
Proportional to Input
Frequencies
VIDEO OUTPUT RISE/FALL TIME:
20Ns Maximum
VIDEO IMPEDANCE:
100 Ohms
OPERATING INPUT POWER:
+10dBm
ACCURACY:
±300 MHz Typical
POWER SUPPLY:
+15vdc @ 875 mA
Maximum
-15vdc @ 150 mA
Maximum
WEIGHT:
6 LBs
SIZE:
8.5” x 5.0” x 3.75”
116
PMI MODEL: FD-0518-10 Option 118
6 CHANNEL, FREQUENCY DISCRIMINATOR
117
9 - INTEGRATED MIC/MMIC
PRODUCTS
118
AMPLIFIED, RF LASER CONTROL MODULE
PMI MODEL No: LCM-7R7G8R2G-CD-1
Frequency Range
7.7 to 8.2GHz
Gain J1 to J2
16dB, ±2dB max (Attenuation = 0dB)
J2 Output 1dB Compression
28dBm typ
Conversion Gain
Tap Out Insertion Loss
Input Power J1
Input Power J4
VSWR J1, J2, J3, J4, J5
0dB, ±3dB max (J1 = 10dBm, J4 = -10dBm)
16dB, ±2dB typ (J1 to J5)
20dBm max
14dB max
2.2:1 max
+15V @ +1000mA max
-15V @ -200mA max
2.5" x 1.75" x 0.4"
Gold Plated
Power Supply
Size
Finish
Low Noise Amplifier 1, 2, 3
Gain
Saturated Output Power
Noise Figure
Reverse Isolation
Phase Shifter
Phase Shift Range
Control Range
Non-Linear Slope Ratio
Switching Speed
Attenuator
Attenuation Range
Control Range
Non-Linear Slope Ratio
Switching Speed
Filter 1, 2, 3, 4, 5
Pass Band
Stop Band, Lower
Stop Band, Upper
Low Pass Active Filter
Pass Band
Stop Band
14dB typ
16dBm typ
2.5dB typ
40dB typ
0° to 360° min
0 to 10 Volts
4:1 typ
200nsec max
0 to 20dB min
0 to 10 Volts
8:1 typ
1.0usec max
7.7 to 8.2GHz, (2dB) typ
DC to 6.8GHz (20dB) typ
10.3 to 18.0GHz, (20dB) typ
DC to 10KHz min
10KHz (Roll Off 6dB per Octave) typ
119
AMPLIFIED, RF LASER CONTROL MODULE
PMI MODEL No: LCM-7R7G8R2G-CD-1
120
MONOPULSE COMPARATOR
MPC-20R2G21R2G-CD-LNF
•
•
•
•
Frequency 20.2 to 21.2 GHz
Lossless from Input to Output
Designed for 100K Noise Temperature
Phase Tracking all 8 Inputs
121
MONOPULSE COMPARATOR
MPC-20R2G21R2G-CD-LNF
Section 1
• 8 Antenna Inputs
• Phase Matched LNAs
• Hybrid Tee
• Ringline Couplers
• Phase Matched Outputs
Section 2
• Hybrid 90° Power Divider
• Branchline Coupler
• SPDT Absorptive Switch
• Solid State
122
LEVEL, SCAN & PULSE MODULATOR
PMI MODEL: LSP-0518-SK
SCAN MODULATION:
Linear transfer function for control voltage of attenuation as
expressed in dB’s. This is in reality an exponential transfer
function.
Vout = A x 10 ^ (Vcontrol / B)
A and B are constants
A Typical Transfer Function Specification would be: 10dB per
Volt.
LEVEL SETTING:
In the LSP module the level setting function is similar to the scan
modulation in that a control voltage sets the dB’s of attenuation
to vary the output level.
PULSE MODULATION:
This is an on and off function, switching the RF on and off to
generate waveforms of a desired shape or characteristic.
ATTENUATION:
Attenuation is the incremental reduction of signal strength
through controlled adjustments of ever increasing resistance
within the RF circuit. These controls can be either through
digital or analog inputs. Attenuation is expressed in dB’s. The
Level set and Scan modulation functions are in reality
attenuation controls.
123
LEVEL, SCAN & PULSE MODULATOR
PMI MODEL: LSP-0518-SK
124
MODULATOR AMPLIFIER
PMI MODEL: PMA-218-LSP
PMI Model Number PMA-218-LSPis an Analog Level, Scan and
Pulse Modulation Module that is capable of exponential (linear in
dB) Modulation, for rugged and high reliability applications using
digital process techniques, that works from 2.0 to 18.0 GHz.
Frequency Range
Output P1 dB
IP3
RF Input Power
0.5 to 18.0 GHz
+12 dBm Minimum
+22 dBm Minimum
+14 dBm Maximum
+12 dBm Operational
Harmonics at P1 dB
Spurious Outputs
VSWR (RF Input)
VSWR (RF Output)
Level Set (Power Attenuation)
Scan Modulation (Attenuation)
Combined Attenuation
Scan and Level Bandwidth
Scan Pulse Response (Settling)
Scan Pulse Response (Rise/Fall)
Digital Processing Jitter
System Frequency Flatness
Attenuation Frequency Flatness
-20.0 dBc Minimum
-60 dBc Minimum
2.2:1 Maximum
2.2:1 Maximum
70 dB Range
70 dB Range
100 dB Minimum
10 kHz
50 uS Maximum
15 uS Maximum
10 uS Maximum
±2 dB
0-40 dB (±2 dB)
40-60 dB (±3 dB)
Attenuation Linearity
Pulse Modulation Depth
RF Pulse Width Range
RF Pulse (Rise Time 10-90%)
RF Pulse (Fall Time 90-10%)
RF Pulse Repetition Rate
RF Pulse Distortion
Pulse / CW Differential
Pulse Width Fidelity
Sensitivity
Bias Voltages / Currents
±1.5 dB
60 dB Minimum
50 nS to CW
9 nS Maximum
9 nS Maximum
10 MHz Maximum
0.3 dB Maximum
0.4 dB Maximum
±10 nS Maximum
6 dB/Volt
+15 vdc @ 1.5 Amps Maximum
-15 vdc @ 1.0 Amps Maximum
Size
4.00" x 3.30" x 0.70"
125
MODULATOR AMPLIFIER
PMI MODEL: PMA-218-LSP
126
PMI MODEL: DGM-18G40G-292FF-DS
QUAD-PHASE & AMPLITUDE MATCHED MILLIMETERWAVE
DIPLEXER-GAIN MODULE
PMI Model No. DGM-18G40G-292FF-DS is a Quad Phase & Amplitude Matched mmW
(Millimeter Wave) Diplexer-Gain module designed to operate over the 18.0 to 40GHz
frequency range with a switched output and an integrated power divider feeding the four
antenna inputs via a 20dB coupler for ease of system set up. The band select function not
only switches bands, but also allows the amplified bands not in use to be turned off to reduce
power consumption. This model is also designed to have better than 60dB harmonic
suppression.
Channel to
Channel
Performance
127
PMI MODEL: DGM-18G40G-292FF-DS
QUAD-PHASE & AMPLITUDE MATCHED MILLIMETERWAVE
DIPLEXER-GAIN MODULE
128
PMI MODEL: DGM-18G40G-292FF-DS
QUAD-PHASE & AMPLITUDE MATCHED MILLIMETERWAVE DIPLEXER-GAIN
MODULE
FREQUENCY RANGE
18.0 to 40.0 GHz
GAIN
3dB Min., 7dB Max.
AMPLITUDE RIPPLE
INPUT P1dB
INPUT IP3
±0.5dB over every 500MHz BW
-20dBm Min.
-10dBm, +5dBm Goal
CHANNEL TO CHANNEL ISOLATION
50dB Typ.
NOISE FIGURE
15dB Typ.
PHASE MATCHING
40º RMS Channels 2,3,4 to REF. Channel 1, over operating temperature
PHASE TRACKING
0.25º/ºC Port to Port Typ.
mmW / µW LIMITER
LIMITER 1dB RECOVERY TIME
30dBm, CW or Pulsed, 2.0 to 40.0 GHz Without Damage, All Inputs.
250nS
SPURIOUS PRODUCTS
DIPLEXER K BAND, 1dB PASSBAND
DIPLEXER Ka BAND, 1dB PASSBAND
-73dBm
18.0 GHz Min., 25.0GHz Max
28.0GHz Min., 40.0 GHz Max
CROSSOVER BAND
CROSSOVER EXCESS ATTENUATION
STOPBAND ATTENUATION
K BAND STOPBAND
Ka BAND STOPBAND
COMM BAND ATTENUATION
COMM BAND
COMM INTERFERENCE IMMUNITY
25.0GHz Min., 28.0 GHz Max.
4dB Attenuation Above K or Ka Passband IL
60dB
900MHz to 15.0GHz, 32.0 GHz to 46.0GHz
900MHz to 22.0GHz
60dB
900 MHz to 2.5 GHz
36dBm CW, 900 MHz to 2.5 GHz w/out Limiter or Amplifier Saturation
COMM INTERFERENCE IMMUNITY
53dBm Pulsed RF, 900 MHz to 2.5GHz w/out Limiter or Amplifier
Saturation
VSWR IN PASSBANDS
HARMONICS FOR -20dBm
BAND SWITCHING TIME, REQUIRED
BAND SWITCHING TIME, GOAL
2.0:1 Typ.
-80dBm, 15 to 40GHz
10mS
1µS
BAND SWITCH PROTECTIVE CIRCUITRY
±15 VDC
POWER SUPPLY PROTECTION CIRCUITRY ON BOTH ±6.0 VDC
SUPPLIES
±15 VDC
POWER SUPPLY VOLTAGE
POWER CONSUMPTION REQUIRED
±6 VDC
5 W Goal
MASS
100 W Goal
CONNECTORS
2.92mm(F) Outputs and Power Divider Input
2.92 mm(M) Inputs.
CONTROL CONNECTORS
SIZE
MDM-9PSP (9 Pin Micro-D with Mating Connector
3.0” X 8.0” X0.75”
129
PMI MODEL: PFEM-9D4G-CD-1
MULTI-FUNCTION MODULE
PMI Model No. PFEM-9D4G-CD-1 is a multi-function
module that provides amplification, switching and
filtering within the frequency band of 9410MHz. This
module provides two input channels and is switchable
to a common output. This model is designed to offer
multiple gain level selection, high channel to channel
isolation and fast switching speeds.
130
PMI MODEL: PFEM-9D4G-CD-1
MULTI-FUNCTION MODULE
TX (State 1)
RX Low Gain (State 2)
RX High Gain (State 3)
0dBm
14dBm
14dBm
9410MHz +/- 30MHz
9410MHz +/- 30MHz
9410MHz +/- 30MHz
0 to -5dBm
11 to 15dBm
30 to 35dBm
Gain Flatness
<0.1dBm
<0.1dBm
<0.1dBm
Noise Figure
N/A
2dB Nominal, 2.5dB Max
2dB Nominal, 2.5dB Max
VSWR
1.5:1 typ.
1.5:1 typ.
1.5:1 typ.
OP3 (Output)
> 18dBm
>18dBm
>18dBm
OP2 (Output)
>8dBm
>8dBm
>8dBm
Port to Port J1-J3 Isolation
>85dB
N/A
N/A
SPECIFICATIONS
Max Input Power at J1
Frequency
Gain
Max Output Power
+ 23dBm
Output Signal Distortion
No apparent droop or distortion with a pulse width of 500 to 1000nsec, at 500 to 2000 PPS
Video Switching Transients
< -120dBm above 1.7GHz
Stability
Unconditionally stable when terminated at J1, J2 and J3 with short circuit at all phases
Max Out-Of-Band Gain
Below In-Band Gain for f > 6.5GHz
-20 dB Below In-Band Gain < 6.5GHz
Switching Time
50ns: TX to RX
50ns: RX Low Gain to RX High Gain
Switching Control
3.3V to 5V, TTL Compatible
BIAS V/I
+12VDC/ 125mA typ.
Size
2.89' x 1.62" x 0.63
Finish
Painted Gray
131
PMI MODEL: PEC-18-2R35G-1R75-9-SFF-HS-LM
INTEGRATED AMPLIFIER, SWITCH, LIMITER
& FILTER MODULE
PARAMETERS
SPECIFICATIONS
CENTER FREQUENCY
2.35 GHz
1dB Bandwidth
150 MHz
30 dBc Rejection
2100 and 2600 MHz
Gain (typ)
18dB
Noise Figure
1.8dB Typ
2.0 dB Max
Isolation
40dB Min
VSWR
2.0:1 Max
RF Input Power
+30 dBm Max
RF Output Power
+2 dBm Max
Switching Speed
(On/Off)
100nS Max
EMI Shielding
60 dB @ 1 Foot Min
Differential Control
A>B = “ON”
B>A = “OFF”
DC Power Supply
+9 VDC
132
PMI MODEL PIA-BTFL-GPO-2CH
INTEGRTED BIAS-T, BAND PASS FILTER
WITH LIMITED OUTPUT
Bias-T
Suspended
Substrate
Bandpass
Filter
Limiter
PARAMETERS
SPECIFICATIONS
PASSBAND LOWER LIMIT:
2.0 GHz Typ
PASSBAND UPPER LIMITER
19.0 GHz Min
-3dB Cut off
1.85dB Typ
PASSBAND INSERTION
LOSS
1.85 dB Typ, 2.5dB Max
REJECTION
-15 dBm Min @ 1.7 GHz
-20dBm Min @ DC to 1.5 GHz
PASSBAND VSWR
2.0:1 Max
BIAS Rise/Fall
90% to 10% / 10% to 90%
50nS Max
LIMITING THRESHOLD
+8dBm Min.
PULSE RECOVERY TIME
50nS Max
(to within 1dB of IL)
133
PMI MODEL: PSD-2G6G-CD-1 & PSD-6G18G-CD-2
HIGH POWER SWITCH/LIMITER ASSEMBLY
PMI Model No. PSD-2G6G-CD-2 and the PSD6G18G-CD-2 are High Power, Switch Box
Assemblies that provides protection to front-end
receivers when in the presence of high power
signals. This is accomplished by sensing the
input signal level and then switching the input
signal into 50 ohms terminations when a set
threshold level is exceeded. This assembly
operates from 2.0 to 6.0GHz and 6.0 to 18.0 GHz
respectively and can handle input power levels
up to 10 Watts CW. The unit is supplied with an
external 0 to 69dB step attenuator that can be
used to adjust the signal levels feeding the
internal threshold detector and thereby setting
the trigger level of when the unit passes the input
RF signal to the output of the switch assembly or
when the signal is switched into the internal 50
ohms terminations. The switching speed is 50ns
maximum. This unit operates on 110VDC,
50/60Hz and is supplied in a housing that
measures 6.0” x 8.0” x 2.5”. This unit is
ruggedized and designed for harsh environments
and is EMI shielded.
134
PMI MODEL: PSD-2G6G-CD-2
HIGH POWER SWITCH/LIMITER ASSEMBLY
Final Assembly:
Frequency Response
Power
Size
Finish
Weight
Pin Diode Switch:
Power Handling
Frequency Response
Switching Speed
Threshold Detector:
Frequency Repsonse
Switching Speed
Output Type
Sensitivity
Max Power (No Damage)
Coupler:
Power Handling
Frequency Response
Coupling Factor
50 Ohm LOAD:
Power Handling
Frequency Response
Attenuator:
Power Handling
Frequency Response
Attenuation
2.0 to 6.0GHz
110VAC Only, 50.60GHz
6.0” X 8.0” X 2.5”
Painted Gray
20 lbs typ.
>= 10W
2.0 to 6.0GHz
< 50ns
2.0 to 6.0GHz
< 50ns
TTL (Compatible with Pin Switch)
< -40dBm
10 dBm
>= 10W
2.0 to 6.0GHz
20 db
>= 10W
2.0 to 6.0GHz
> 2W
2.0 to 6.0GHz
0 - 69 By (1) Front Panel Knob or
Thumb Wheel
135
PMI MODEL: PSD-6G18G-CD-2
HIGH POWER SWITCH/LIMITER ASSEMBLY
Final Assembly:
Frequency Response
Power
Size
Finish
Weight
Pin Diode Switch:
Power Handling
Frequency Response
Switching Speed
Threshold Detector:
Frequency Repsonse
Switching Speed
Output Type
Sensitivity
Max Power (No Damage)
Coupler:
Power Handling
Frequency Response
Coupling Factor
50 Ohm LOAD:
Power Handling
Frequency Response
Attenuator:
Power Handling
Frequency Response
Attenuation
6.0 to 18.0GHz
110VAC Only, 50.60GHz
6.0” X 8.0” X 2.5”
Painted Gray
20 lbs typ.
>= 10W
6.0 to 18.0GHz
< 50ns
6.0 to 18.0GHz
< 50ns
TTL (Compatible with Pin Switch)
< -40dBm
10 dBm
>= 10W
6.0 to 18.0GHz
20 dB
>= 10W
6.0 to 18.0GHz
> 2W
6.0 to 18.0GHz
0 - 69 By (1) Front Panel Knob or Thumb
Wheel
136
PMI MODEL: PMOD-PWR-1030M-ATN-SFF
POWER DETECTOR MODULE
Sigma Input Signal
Frequency
Forward Input Power (J1)
Reverse Input Power (J2)
Omega Input Signal
Frequency
Forward Input Power (J3)
Reverse Input Power (J4)
1030 MHz ±0.0 MHz
+37.16 dBm ±5 dB
(+50dBm No Damage)
+22.21 dBm ±1 dB
(+35dBm No Damage)
1030 MHz ±0.01 MHz
+40.83 dBm ±2 dB
(+50dBm No Damage)
+15.42 dBm ±2.5 dB
(+35dBm No Damage)
PMI Model No. PMOD-PWR-1030M-ATN-SFF is a
power detector module. The operating frequency is
1030MHz +/-0.01MHz. Two pairs of forward and
reverse signals are input allowing for a 12 bit linear
digital output proportional to the input power. A GUI
is provided to interface through Ethernet and allow
MCU programming, unit calibration and setting of
the variable attenuators.
Synchronize ER/Sync (J11) Specification
Pulsewidth
Amplitude
Impedance
GUI
Test Video Specification
ER/MNTRVID (J5)
Digital Control Lines
(Other than ER/Sync)
DC Power
Connectors
J1, J2, J3, J4, J5, J11
J6
J8, J9
J7
J10
Finish
38 usec
0 to 5 VDC
75 Ohms
- Interfaces with unit through ethernet connection
- Allows setting of variable attenuators
- Allows calibration of power detectors
- Allows programming calibration table to
microcontroller without need for additional hardware
0 to 5 VDC Amplitude
TTL Differential Pairs
+5 VDC +/-5%
+15 VDC +/-5%
-15 VDC +/-5%
SMA(F)
15 Pin Sub-Miniature D Male
37 Pin Sub-Miniature D Male
Molex 0878331031 or Equivalent
Ethernet/ RJ45
Painted Blue
137
PMI MODEL: PMOD-PWR-1030M-ATN-SFF
POWER DETECTOR MODULE
FRONT
REAR
FUNCTIONAL BLOCK DIAGRAM
138
10 - I & Q VECTOR MODULATORS
139
PMI MODEL: PIQ-85M18G-360/20-CD-2
I/Q VECTOR MODULATOR
PMI Model No. PIQ-85M18G-36020-CD-2 is a Vector Modulator
covering the frequency range of 85MHz to 18GHz. This unit provides
an attenuator resolution of 0.1dB and a phase shift resolution of 0.8
degrees. The attenuation is phase invariant and the phase is
amplitude invariant making it ideal for nulling unwanted signals. The
unit can be specifically calibrated for any number of 100MHz bands
within the full operating frequency range of 85MHz to 18GHz
Frequency Range
Phase Range
0.85 to 18.0GHz
360° Nominal
Attenuation Dynamic Range
20dB min.
Attenuation Resolution
0.1dB max.
Insertion Loss
-3dB ± 4dB
Amplitude Variation
±4dB across frequency range
Amplitude Variation, Narrow Band
±0.5dB across any 50MHz (100MHz to 500MHz)
±0.5dB across any 100MHz (50MHz to 18GHz)
Phase Variation, Narrow Band
±2° over any 50MHz (100MHz to 500MHz)
±2° over any 100MHz (500MHz to 18GHz)
Phase Resolution
0.8° max.
Return Loss (Input / Output)
10dB min.
RF Input Power, Operating
0dBm to +10dBm max.
RF Input Power (CW) Damage Threshold
+30dBm CW max.
Control Type
- Frequency Setting
- Phase Shift Setting
- Attenuator Setting
8-BIt TTL for 100 MHz Bands
9-Bit TTL
8-Bit TTL
Band Switching
Integrated Input / Output Switch (Nominal)
Switching Speed
Power Supplies
3usec typ.
±15V and +5V
Gain For Output Amplifier
28dB Nominal
Noise Figure For Output Amplifier
4dB Typical
OIP3 For Output Amplifier
27.5dBm Typical
OP1dB For Output Amplifier
16dBm Typical
Size
RF Connectors
6.0" x 3.0" x 1.0"
SMA (F)
Digital / Power Connector
MDM-37PH003P or Equivalent
Mating Connector Provided
Finish
Painted Gray
140
PMI MODEL: PIQ-85M18G-360/20-CD-2
I/Q VECTOR MODULATOR
SWITCHING SPEED FULL PULSE
141
PMI MODEL: PIQ-0R5G2G-360-20-CD-1
I/Q VECTOR MODULATOR
PMI Model No. PIQ-0R5G2G-360-20-CD-1 is a 0.5 to
2.0GHz, High Performance I/Q Vector Modulator with 2 x 12
bit monotonic TTL compatible channels (I and Q). This model
offers a full 360 degrees of phase shift with a minimum of
20dB of amplitude control.
Frequency Range
0.5 to 2.0GHz
Dynamic Range
20dB & 360 Degrees
RF Input Power
+5dM CW, 1.0 Watt max
Insertion Loss
11.0dB max
VSWR
1.6:1 max (50 ohm system)
Attenuation vs Frequency
±1,5dB typ.
Phase vs Frequency
±10.0 degrees typ
Control Logic
2x12 BITs (I & Q), TTL Compatible
Control Slopes
Linear
Switching Speed
500 nSec max
Temperature Coefficient
±0.035 dB/ºC & ±0.17 Deg/ºC
Power Supply
±12V to ±15V @ 100mA max
RF Connectors
SMA Female Input and Output
Power/ Logic Connectors
DC-37P, Sub Miniature D Multi-Pin
Size
5.0" x 5.0" x 1.0"
142
PMI MODEL: PIQ-0R5G2G-360-20-CD-1
I/Q VECTOR MODULATOR
Insertion Loss, VSWR & Phase @ 0º
Polar Data @ +60ºC
Polar Data @ +25ºC
Polar Data @ -10ºC
ATTENUATION vs. FREQ @ 25ºC
PHASE vs. FREQ @ 25ºC
143
PMI MODEL: PIQ-2G18G-360-16-CD-1
I/Q VECTOR MODULATOR
PMI Model No. PIQ-2G18G-360-16-CD-1 is a 2.0 to
18.0GHz, high performance I/Q Vector Modulator with 2 x 12
bit monotonic TTL compatible channels (I and Q). This model
offers a full 360 degrees of phase shift with a minimum of
16dB of amplitude control.
Frequency Range
2.0 to 18.0GHz
Dynamic Range
16dB & 360 degrees
RF Input Power
+10dBm CW, 1.0 Watt max
Insertion Loss
16.0dB max
VSWR
2.2:1 max (50 OHM System)
Attenuation vs Frequency
±3.5dB typ
Phase vs Frequency
±20.0 degrees typ
Control Logic
2x12 BITs (I & Q), TTL Compatible
Control Slopes
Linear
Switching Speed
500 nSec max
Temperature Coefficient
±0.035 dB/ºC & ±0.17 Deg/ºC
Power Supply
±12V to ±15V @ 100mA max
RF Connectors
SMA Female Input and Output
Power/ Logic Connectors
DC-37P, Sub Miniature D Multi-Pin
Size
4.25" x 3.5" x 1.0"
144
PMI MODEL: PIQ-2G18G-360-16-CD-1
I/Q VECTOR MODULATOR
Phase Data @ 25ºC
Polar Data @ 25ºC
Insertion Loss, VSWR & Phase @ 0º@ 25ºC
Attenuation Data @ 25ºC
145
11 - LIMITERS &
DETECTORS
146
HIGH SPEED, 1 WATT LIMITER, 0.5 to 18.0GHz
LM-0518-10-1W-SHS-1
Frequency
0.5GHz to 18.0GHz
Insertion Loss @ -20dBm Input
2.0 dB max., 1.5 dB typ.
VSWR Input
1.5:1
Input Power:
1 Watt CW
100 Watts Peak, 1uS Pulse
0.1% Duty Cycle, Derated to
20% @ 125C
Pulse Width:
1usec
Leakage @ 1 Watt CW
+14dBm Max.
+10dBm Typ.
Duty Cycle:
0.1%
Leakage @ 1 watt CW Input
+14dBm max.
Speed
10nS
Size
0.5" x 0.5" x 0.22"
147
Ultra-High Speed, 1 Watt, Limiter
LM-18G40G-18-1W-292FF
Frequency Range
18.0GHz to 40.0GHz
Insertion Loss
4.0 dB Max.
Input Power
1 Watt CW Max.
Leakage Power
+18dBm Max.
1dB Recovery Time
10nsec Max.
VSWR
2.1:1
Connectors
2.92mm (F) Removable (K-Type
Equivalent)
Size
0.5" X 0.5" X 0.22"
Weight
1.5 OZ. Typ.
148
5 WATT, COAXIAL LIMITER
PMI MODEL: LM-30M3G-5W-SMF
PARAMETERS
SPECIFICATIONS
FREQUENCY RANGE
30 MHz to 3.0 GHz
INSERTION LOSS
1.2dB Max
PEAK RF INPUT POWER
5 WATTS CW @ 25C
LEAKAGE POWER
+16dBm Max
RECOVERY TIME
1µS Max
INPUT VSWR
1.5:1 Max
149
5 WATT LIMITER
PMI Model: LM-2G8G-13-5W-SFF
PARAMETERS
SPECIFICATION
FREQUENCY
2.0 to 18.0 GHz
INPUT POWER
5 Watts CW Max
LEAKAGE
13 dBm Max
RECOVERY TIME
40nS Max
INSERTION LOSS @ -20 dBm
Input Power
1 dB Typ
VSWR @ -20 dBm Input
Power
2.0:1 Max
150
5 WATT LIMITER
PMI Model: LM-2G8G-13-5W-SFF
RECOVERY TIME
151
20 WATT, 35.5GHz, LIMITER
PMI MODEL: LM-35D5G-14-20W-292FF
•
FREQUENCY
35.5GHz
•
INSERTION LOSS
2.0dB
•
PEAK POWER
43dBm
•
PULSE WIDTH
440 to 670 nSec
•
PRF
600 to 900 KHz
•
DUTY CYCLE
40%
•
LEAKAGE POWER
+14dBm Typ
•
1dB RECOVERY TIME
100nSec
152
20 Watt, Surface Mount Limiter
LM-18G40G-SMT-1
Frequency Range
18GHz to 40GHz
Insertion Loss
4.0dB Maximum
Peak Input Power
20 Watts, 440 to 670nsec Pulse
Width,
PRF 600 to 900kHz, 40% Duty Cycle
Leakage Power
+14dBm Typical
1dB Recovery Time
250nsec Maximum
VSWR
2.0:1
Size of SMT / Drop-In Carrier
0.198" X 0.270" X 0.016"
153
30 WATT, LIMITER
PMI MODEL: LM-6D7G7D9G-30W-SFF
Frequency
6.7GHz to 7.9GHz
Insertion Loss @ -20dBm Input
1.1dB max.
Input VSWR @ -20dBm Input
1.5:1 max.
Impedance
50 Ohms
Input Power
30 Watts CW max.
Maximum Flat Leakage
18dBm max at Input Power of 30 Watts CW
Recovery Time
10usec max
Size
1.0" x 0.65" x 0.38"
Finish
Gold Plated
154
HIGH SENSITIVITY DETECTOR
PMI MODEL: DD-20-218-5PF-3-P-M
Frequency Range
Voltage Sensitivity
TSS
Frequency Flatness
VSWR
Rise Time
Video Capacitance
Output Voltage
Maximum Input Power
Connectors
Size
Finish
Rise Time 4.63nS
10nS / Div. & 100nS PW
2 to 18 GHz
500 mV / mW typical
-50dBm @ 2MHz Video Bandwidth
(With 2dB Noise Figure Amplifier)
±1.0dB
3.5:1 Maximum (Measured at Pin = -23dBm)
10nsec typical
5.6pF typical
Positive (Negative Available Upon Request)
+20dBm CW
Input: SMA Male
Output: SMA Female
0.5" x 0.5" x 0.22"
Mil-SPEC Epoxy Paint, Gray
Detector Flatness vs. Frequency
Tested @ -20dBm (770mV/mW)
155
ZERO BIAS SCHOTTKY DETECTOR
PMI MODEL: DD-1G18G-ZBS-SMF
Frequency Range
VSWR
Frequency Flatness
Output Polarity
Input Power
Input RF Connector
Output RF Connector
Size
Finish
1.0 to 18.0GHz
8.0:1 Typical
±1.0dB Typical
Positive
100mW, Derated to zero at +150°C
SMA Male
SMA Female
1.081" x 0.705" x 0.290"
Gold Plated
156
DC-COUPLED DIRECTIONAL DETECTOR
PMI MODEL: DD-20-23
Frequency Range
2.5 GHz to 3.5 GHz
Insertion Loss
0.5 dB
Insertion Loss Variation
0.2 dB (Over Frequency)
VSWR Input
1.25:1
Impedance
50 ohm
Minimum Directivity
20 dB (Narrow Band Only)
Maximum RF Input
3 Watts
Maximum Output Voltage
31 mV @ +16 dBm to 220 mV @ +26
dBm
Video Bandwidth
10 MHz
Power Plus
+15V
Power Minus
-15V
Size
2.44" x 1.50" x 0.77"
Weight
<4 oz.
157
6 to 18GHz RF FILTER/DETECTOR
PMI Model No: RFFD-618-730049
PMI MODEL RFFD-618-730049 IS A 6 TO 18GHz LOW PASS FILTER COMBINED
WITH A SCHOTTKY BIASED DETECTOR INCLUDING A REVERSE VOLTAGE
PROTECTION DIODE, A DUPLICATE DETECTOR AND PROTECTION DIODE IS
INCLUDED FOR DC OFFSET VOLTAGE COMPENSATION.
Frequency Range
6 to 18GHz
Return Loss
-10dB
Maximum Input Power
7dBm Operational
20dBm Survival
Filter Rejection
23dB min. (20 to 26GHz)
Voltage Sensitivity
80 to 140mV
Barrier Potential
225 to 270mV with 100uA bias to +25
Deg. C
Operating Dynamic Range
-23 to +7dBm
Frequency Flatness
±0.8dB with 1dB to 2dB typical slope
Diode Voltage Protection
1.0V max. at 30mA
Tracking Detector-Balance
±20mV max. over operating
temperature
Connectors:
RF Input: Filed Replaceable
Video Output : Field Replaceable
DC Connections
SMA(M)
SMA(F)
Feed-thru Solder Pins
Size
1.60" x 1.59" x 0.6"
158
12 - LOG AMPLIFIERS
159
PMI MODEL: SDLVA-0060-80
60MHz Fo, LIMITED IF OUTPUT LOG AMP
Frequency Range
Dynamic Range
VSWR In/Out
Logging Range
Limited IF Output
55 to 65 MHz
80 dB Minimum
1.5:1 Maximum
-80 to 0 dBm Typical
0 dBm Typical
Maximum RF Input Power
+10 dBm Maximum
Log Video Output
Output Coupling
DC
Maximum Output Voltage
2.7 Volts
Rise Time
Fall Time
Pulse Width
Slope
Log Slope Variation with
Temperature
Propagation Delay
Video Load
DC Power Supply
+V
-V
Size
20 nsec Maximum
30 nsec Maximum
<100 nsec
25 mV/dB Nominal
±1 mV Nominal
10 nsec Typical
100Ω Typical
+15 Volts @ 100 mA
-15 Volts @ 190 mA
3.75" x 1.50" x 0.50"
160
PMI MODEL: SDLVA-0120-100M2G-10DBM
100MHz TO 2.0GHz, 10dBm LIMITED IF OUTPUT
Frequency Range
Dynamic Range
0.1 to 2.0GHz
70dB Min, 75dB Typ.
Log Linearity
±2.0dB MAX. (-65 dBm to +5dBm),
Log Linearity @ 100MHz
±2.0dB MAX. (-50dBm to +5dBm)
Minimum Log Range
Maximum Log Range
VSWR Input
-65dBm
+5dBm
2.0:1 MAX., (1.8:1 TYP).
Tangential Sensitivity
-65dBm Minimum (-70dBm TYP)
Limited IF Output
+10dBm
Maximum RF Input Power
+10dBm
Log Video Output Coupling
DC
Log Video Maximum Output Voltage
2.7 v
Log Video Output Rise Time
25 ns Maximum
Log Video Output Fall Time
30 ns Maximum
Log Video Output Settling Time
40 ns Maximum
Log Video Output DC Offset
0.1 v Nominal (Adjustable)
Log Video Output Slope
25 mV/dB Nominal (At 1GHz)
Log Video Output Variation with
Frequency
±0.5 mV/dB (Over 80 MHz RF
Bandwidth)
Log Video Output Variation with
Temperature
±0.5mV/dB TYP.
Log Video Propagation Delay
10ns TYP.
Log Video Load
DC Power (+V)
DC Power (-V)
Size
100 ohms ±10%
+7 to +18 Volts @ 300mA
-7 to -18 Volts @ 150mA
3.75 " x 1.50 " x 0.40"
161
PMI MODEL: SDLVA-100M700M-70
100MHz TO 700MHz, LIMITED IF OUTPUT LOG AMP
RISE & FALL @ +5dBm
Frequency Range
Dynamic Range
100 to 700MHz
55dB minimum, 60dB typical
Log Linearity
±1.2dB typ., ±1.2dB max. @ (-55dBm to 0dBm)
Log Linearity
±1.5dB typ., ±2.0dB max. @ (-60dBm to 0dBm)
Minimum Log Voltage
Maximum Log Voltage
VSWR Input
Tangential Sensitivity
Limited IF Output
-55dBm (-60dBm typ.)
0dBm (+10dBm typ.)
2.0:1 max. (1.5:1 typ)
-60dBm typical
-10dBm minimum, -5dBm typical
Maximum RF Input Power
+10dBm
Log Video Output Coupling
DC
Log Video Maximum Output Voltage
2.7 Volts
Log Video Output Rise Time
15ns typ., 25nsec max.
Log Video Output Fall Time
15ns typ., 30nsec max.
Log Video Output Settling Time
40ns maximum
Log Video Output DC Offset
0.1 Volts Nominal (Adjustable)
Log Video Output Slope
25mV/dB Nominal ±5mV/dB
Log Video Output Variation with Frequency ±0.5mV/dB typ. (Over 80MHz RF Bandwidth)
Log Video Output Variation with
Temperature
Log Video Propagation Delay
Log Video Load
DC Power (+V)
19nS Rise
24nS Fall
±1mV/dB typ.
10ns Maximum, 7nS Typical
100 ohms ±10%
+12 to +12 Volts @ 100mA
DC Power (-V)
-12 to -15 Volts @ 200mA
Note: Do not supply +V without -V supplied as
well as this may damage the unit
Size
Finish
3.75 " x 1.50 " x 0.50"
Gold Plated
162
13 - PULSE & BI-PHASE
MODULATORS
163
PMI MODEL: BPM-1G2G-1-SFF
1.0GHz TO 2.0GHz, BI-PHASE MODULATOR
Frequency Range
1.0 to 2.0GHz
Insertion Loss
8.8dB Max.
VSWR
2.0:1
Amplitude Balance
0.25dB Typ., 0.75dB Max.
Phase Balance
±2° Typ., ±5° Max.
Carrier Suppression
-30dBc Typ.
Impedance
50 Ohms
Switching Speed
5nsec Typ. (50% Control to
90% RF)
Data Signal
TTL Compatible
RF Input Power
-3dBm Max.
RF Connectors
SMA - Female
Power Supply
+5V @ 25mA Typ.
Size
2.0" x 1.0" x 0.5"
Weight
1.5 oz. Typ.
Finish
Painted Gray
8.0nS Fall
5.2nS Rise
164
PMI MODEL: PS-90-8018
8.0GHz TO 18.0GHz, BI-PHASE MODULATOR
FREQUENCY RANGE
9 to 9.5 GHz
INSERTION LOSS
2.0 dB MAXIMUM
VSWR INPUT
1.8:1 TYPICAL
OPERATING INPUT POWER
+20 dBm OPERATING
MAXIMUM RF INPUT
0.5 WATT CW, 1uS PULSE WIDTH
SURVIVAL
LOG VIDEO OUTPUT RISE TIME
100 nS MAXIMUM
LOG VIDEO OUTPUT SETTLING TIME
100 nS MAXIMUM
CARRIER SUPPRESSION
20 dB TYPICAL
POWER PLUS
+/-5 VDC @ +/-50 mA MAXIMUM
POWER MINUS
+/-5 VDC @ +/-50 mA MAXIMUM
SIZE
1.0" X 1.0" X 0.5"
WEIGHT
<1.5 OUNCES
165
PMI MODEL: PS-90-1020-101F
1.0GHz TO 1.12.0GHz, BI-PHASE MODULATOR
Frequency Range
1.0 to 1.12GHz
Insertion Loss
2.0 dB Maximum
Return Loss (VSWR)
1.7:1 Maximum
Switching Speed
30nsec Maximum
Switching Rate
Not less than 4MHz
Switching Type
Hot (RF present during switching as it
is for CW operation)
Phase States
0° / 180°
RF Input Power
+20dBm CW Maximum
RF Connectors
SMA - Female
Control
TTL
Power Supply
+5VDC @ 30mA Typical
-12VDC @ 2mA Typical
Size
1.0" X 1.0" X 0.50"
Weight
≤2.0 oz.
Finish
Painted Gray
166
PMI MODEL: PS-180-4R15R3-SFF
4.1GHz TO 5.3GHz, BI-PHASE MODULATOR
Frequency Range
4.1 to 5.3GHz
Insertion Loss
3.0dB Max.
Phase Shift
180° ± 4°
VSWR
1.7:1
Impedance
50 Ohms
Switching Speed
100nsec Max.
Control Logic
TTL Compatible
"0" = 0 Degrees
"1" = 180 Degrees
RF Input Power (Survival)
+30dBm Max.
RF Connectors
SMA - Female
Power Supply
+5V @ 50mA Max. and -5V @ 50mA Max.
Size
1.0" x 1.0" x 0.5"
Finish
Painted Gray
167
PMI MODEL: PS-90-6012
6.0GHz TO 12.0GHz, BI-PHASE MODULATOR
FREQUENCY RANGE
6.0 TO 12.0GHz
INSERTION LOSS
2.5 dB TYPICAL, 3.0 dB MAXIMUM
VSWR INPUT
2.0:1
OPERATING INPUT POWER
+20 dBm OPERATING
SPEED
75 nS MAXIMUM ON/OFF
MAXIMUM RF INPUT
0.5 WATT CW, 1uS PULSE WIDTH SURVIVAL
CARRIER SUPPRESSION
20 dB TYPICAL
POWER PLUS
+5 VDC @ 75 mA MAXIMUM
POWER MINUS
-5 VDC @ 20 mA MAXIMUM
SIZE
1.0" X 1.0" X 0.5"
WEIGHT
<2 OUNCES
168
14 - PHASE SHIFTERS
169
6-Bit Digital Phase Shifter
PS-360-900M930M-6-SFF
Frequency Range
900 to 930MHz
Insertion Loss
7dB typical, 7.5dB max.
VSWR
2.0:1 typical
Switching Speed
250nsec typical, 1usec max.
RF Input Power (Operating)
+14dBm CW Max.
Control
6 BIT TTL
LSB
5.6 degrees
DC Voltage
+15V @ 35mA typical
-15V @ 0mA typical
Size
2.0" X 2.1" X 0.5"
RF Connectors
SMA - Female
Control & Power Connector
15 Pin Sub-D (male)
Finish
Painted Gray
170
9-Bit, 360°, Digital Phase Shifter
PMI MODEL No: PS-100M1200M-9B-SFF
Frequency Range
0.1 to 1.2 GHz
Control
9-Bit TTL
Insertion Loss
13 dB max.
Phase Shift
360° typ
Amplitude Error
±1.0 dB typ
Phase Shift Error
±10° typ
Switching Speed
500 nsec max
Power Supply
+15 V @ 250 mA typ
-15 V @ 20 mA typ
Size
4.95" X 3.38" X 1.00"
Weight
14 oz.
Connectors (RF)
SMA(F)
Control (Connector)
15 Pin Sub-D (male)
Finish
Painted Blue
SWITCHING SPEED
171
9-Bit, 360°, Digital Phase Shifter
PMI MODEL No: PS-100M1200M-9B-SFF
172
Digitally Controlled 360 Degree Phase Shifter
PS-360-2433D5-6-SFF-1
Frequency Range
2433.5MHz ± 1MHz
Insertion Loss
5dB Typical, 8.0dB Max.
VSWR
2.0:1 Typical
Phase Accuracy
±8.0 typical
Switching Speed
200nsec typ., 250nsec Max.
RF Input Power - Operating
500mW @ 21% Duty Cycle Max.
RF Input Power - Survival
+33dBm CW Max.
Control
6 BIT TTL
LSB
5.6 degrees
DC Voltage
+5V @ 6mA Typical
-15V @ 6mA Typical
Size
2.0" X 2.1" X 0.5"
RF Connectors
SMA - Female
Control & Power Connector
15 Pin Sub-D (male)
Finish
Painted Gray
173
360 Degree, Digital Phase Shifter
PS-360-2D42D5-10-SFF
Frequency Range
2.4 to 2.5GHz
Insertion Loss
4dB Typical
VSWR
1.75:1 Max.
Phase Accuracy
±1.0 typical
Switching Speed
500nsec max., 300nsec Typ.
RF Input Power
+20dBm CW Max.
Control
10 BIT TTL
LSB
0.36 degrees
Positive DC Voltage
+12V @ 50mA Typ.
Size
2.0" X 2.1" X 0.5"
RF Connectors
SMA - Female
Control & Power Connector
15 Pin Sub-D (male)
174
360 Degree, Digital Phase Shifter
PS-2D2G-360-CD-1
Frequency Range
RF Input Power
2170 to 2200MHz
10dBm Max.
RF Input Power (Survival)
+15dBm Max.
Insertion Loss
13dB Typical, 19dB Max.
Insertion Loss vs. Frequency
±0.25dB Max.
Insertion Loss vs. Temperature
±1.0dBpp Typical (Over any 15ºC Temp.
Range)
Insertion Loss vs. Phase
±0.3dB Goal, ±0.5dB Max.
Phase Control Range
RF Impedance
Resolution
Phase Accuracy
IP3
Switching Speed
Control
LSB
Input VSWR
Output VSWR
Positive DC Voltage
Size
RF Connectors
360 Degrees
±2 Degrees Typ. (Over any 15ºC Temp.
Range)
50 Ohms
<1 Degree Typ.
±1.0 typical
+25dBm Typ.
350nsec Typ.
9 BIT TTL
0.7 degrees
1.3:1 Max.
1.4:1 Max.
+12V @ 50mA Typ.
2.0" X 2.1" X 0.5"
SMA - Female
Control & Power Connector
15 Pin Sub-D (male)
Phase vs. Temperature
175
360 Degree, Digital Phase Shifter
PS-2D2G-360-CD-1
Frequency Range
RF Input Power
2170 to 2200MHz
10dBm Max.
RF Input Power (Survival)
+15dBm Max.
Insertion Loss
13dB Typical, 19dB Max.
Insertion Loss vs. Frequency
±0.25dB Max.
Insertion Loss vs. Temperature
±1.0dBpp Typical (Over any 15ºC Temp.
Range)
Insertion Loss vs. Phase
±0.3dB Goal, ±0.5dB Max.
Phase Control Range
RF Impedance
Resolution
Phase Accuracy
IP3
Switching Speed
Control
LSB
Input VSWR
Output VSWR
Positive DC Voltage
Size
RF Connectors
360 Degrees
±2 Degrees Typ. (Over any 15ºC Temp.
Range)
50 Ohms
<1 Degree Typ.
±1.0 typical
+25dBm Typ.
350nsec Typ.
9 BIT TTL
0.7 degrees
1.3:1 Max.
1.4:1 Max.
+12V @ 50mA Typ.
2.0" X 2.1" X 0.5"
SMA - Female
Control & Power Connector
15 Pin Sub-D (male)
Phase vs. Temperature
176
2 to 6 GHz, 360 Degree, Digital Phase Shifter
PMI MODEL No: PS-2G6G-8B-SFF
177
2 to 6 GHz, 360 Degree, Digital Phase Shifter
PMI MODEL No: PS-2G6G-8B-SFF
PHASE SHIFT @ 0dBm Input @ 25ºC
Switching Speed
Yellow: RF Output 0º to 180º
Green: TTL Input
178
5.4 to 5.9GHz, DIGITAL 360º PHASE SHIFTER
PMI MODEL: PS-504509-360-QQ1470
Frequency
5.4 to 5.9GHz
RF Impedance -(Nominal)
50 Ohms
Logic Input
Phase Shift (Min)
Step Size (LSB)
Insertion Loss (Max)
+15V @ 90mA
-15V @ 60mA
TTL Control
360º
1.41º LSB
6.0dB max @ 0º Phase Shift
Amplitude Ripple (Max)
+/-1.5dB
VSWR (Max)
Switching Speed
2.0:1 (Input/Output)
200ns
Temperature Compensation
Maximum phase drift shall be no more
than +/-5º or
+/-5%, whichever is greater, over the
specified temperature range.
Voltage
Monoticity
RF Power (Operating)
Peak or Continuous Wave
Connectors
RF In/Out
Power and Controls
Size
Guaranteed
10mW
SMA(F)
Male 15 Pin Subminiature "Micro D"
Connector
6.0" x 2.5" x 0.8"
179
5.4 to 5.9GHz, DIGITAL 360º PHASE SHIFTER
PMI MODEL: PS-504509-360-QQ1470
180
8 to 10 GHz, 360º PHASE SHIFTER
PMI MODEL: PS-360-DC-1R opt. 810
FREQUENCY RANGE
8.0 GHz TO 10.0 GHz
INSERTION LOSS
11.5 dB MAXIMUM
VSWR
1.75:1 MAXIMUM
PHASE ACCURACY
±10 DEGREES
SWITCHING SPEED
500 nSec
POWER HANDLING
+20 dBm (+30 dBm SURVIVAL)
CONTROL
10 BIT TTL
POWER PLUS
+5V @ 200 mA MAXIMUM, +12V TO +15V @ 100 mA MAXIMUM
POWER MINUS
-12V TO -15V @ 70 mA MAXIMUM
SIZE
4.95" X 3.38" X 1.02"
WEIGHT
13 OUNCES TYPICAL
181
8 to 10 GHz, 360º PHASE SHIFTER
PMI MODEL: PS-360-DC-1R opt. 810
182
9 to 11 GHz, 360º PHASE SHIFTER
PMI MODEL: PS-9G11G-260-A-SFF
Frequency Range
9.0 to 10.0GHz
RF Impedance
50 Ohms
Phase Shift Range
0 to 360 Degrees
Phase Accuracy
±10 Degrees Typ.
Insertion Loss
7dB Typ., 10dB Max.
VSWR
1.75:1 Typ.
Voltage Control Range
-7.5 to +7.5VDC
Speed
150nsec Typ.
Operating Input Power
+10dBm CW Typ.
DC Supply
+15VDC, 30mA
Size
4.95" x 3.38" x 1.02"
Weight
13 ounces Typ.
Finish
Painted Gray
183
8 to 10 GHz, 360º PHASE SHIFTER
PMI MODEL: PS-360-DC-1R opt. 810
184
DIGITAL 360º PHASE SHIFTER
PMI MODEL: PS-360-DC-3, Opt. 911
• FREQUENCY RANGE:
9 TO 11 GHz
• INSERTION LOSS:
10 dB typical, 12 dB Maximum
• SWITCHING SPEED:
50 nS Maximum
• RISE/FALL TIME:
20 ns Maximum
• VSWR INPUT/OUTPUT:
2.0:1 Maximum
• TRANSLATION RATE:
500 KHz (4 Most Significant Bits)
• CARRIER SUPPRESSION:
> 20 dBc
• SIDEBAND SUPPRESSION:
> 15 dBc
• PM / AM:
±2.0 dB Max.
• DC POWER:
+12 VOLTS@115mA (Max.),
-12 VOLTS@20mA (Max.)
185
DIGITAL 360º PHASE SHIFTER
PMI MODEL: PS-360-DC-3, Opt. 911
SPEED DATA - 0º to 180º PHASE SHIFT
HARMONICS @ 10GHz +15dBm Input
186
DIGITAL 360º PHASE SHIFTER
PMI MODEL: PS-360-DC-3, Opt. 618
• FREQUENCY RANGE:
6 TO 18 GHz
• INSERTION LOSS:
10 dB typical, 12 dB Maximum
• SWITCHING SPEED:
50 nS Maximum
• RISE/FALL TIME:
20 ns Maximum
• VSWR INPUT/OUTPUT:
2.0:1 Maximum
• TRANSLATION RATE:
500 KHz (4 Most Significant Bits)
• CARRIER SUPPRESSION:
-18 dBc (6 to 8 GHz), -25 dBc (8 to 18 GHz)
• SIDEBAND SUPPRESSION:
-15 dBc (6 to 8 GHz), -20 dBc (8 to 18 GHz)
• PM / AM:
±2.5 dB Max. (6 to 8 GHz), ±1.7 dB Max. (8 to 18 GHz)
• DC POWER:
+ 5 VOLTS@115mA (Max.),
-12 VOLTS@20mA (Max.)
187
DIGITAL 360º PHASE SHIFTER
PMI MODEL: PS-360-DC-3, Opt. 618
HARMONICS - WORST CASE (6 to 8 GHz)
188
32 to 37GHz, 8-Bit Digital, Phase Shifter
PMI MODEL No: PS-360-3237-8-292FF
Frequency
32.0 to 37.0GHz
Insertion Loss
13.0dB typ
VSWR
2.0:1 typ
LSB
1.40625°
Control Bits
8 line (TTL Control)
Switching Speed
500 nS Maximum
Power Supply
+15V @ 90mA Maximum
-15V @ 60mA Maximum
Connectors
2.92mm Female Input & Output
Size
1.150" X 1.800" X 0.4"
189
32 to 37GHz, 8-Bit Digital, Phase Shifter
PMI MODEL No: PS-360-3237-8-292FF
SWITCHING SPEED (FALL TIME / DELAY OFF)
SWITCHING SPEED (FULL PULSE)
190
INTEGRATED PHASE SHIFTER & ATTENUATOR
PMI MODEL: PSAT-2500-11B-CD-1
SPECTRAL ANALYSIS - CARRIER
HARMONIC SUPRESSION
191
INTEGRATED PHASE SHIFTER & ATTENUATOR
PMI MODEL: PSAT-2500-11B-CD-1
192
INTEGRATED PHASE SHIFTER & ATTENUATOR
PMI MODEL: PSAT-2500-11B-CD-1
193
15 - RACK & CHASSIS MOUNT
PRODUCTS
194
RACK & CHASSIS MOUNT PRODUCTS
PMI offers various RF and Microwave products that range from 250kHz up to
40.0GHz which are supplied in a ruggedized, 1U to 6U chassis. Many options
are available. If you do not see exactly what you require on this web site
please contact us because we offer amplifiers designed and built to your
specifications at catalog prices.
Our ruggedized, military grade chassis products are built to meet your
exact application needs:











Amplification
Attenuation (Digital Solid-State)
Switching (Ultra High Speed)
Power Detection / Fault Detection
Phase Shifting / Phase Modulation
Pulse Modulation
Noise Generation
RF Filtering
RF Limiting
Power Splitting
RF Signal Distribution
195
RACK & CHASSIS MOUNT PRODUCTS
1U 19" Rack Mount Amplifiers
PMI offers a full line of RF and Microwave Amplifiers that range from 250kHz up to 40.0GHz. Any of our standard amplifiers or amplifiers that
are built to meet your specifications can be supplied in a ruggedized, 1U chassis. Many options are available. If you do not see exactly what
you require on this web site please contact us because we offer amplifiers designed and built to your specifications at catalog prices.
Features that are supplied with all of our rack mount amplifiers:
• Internal AC Power Supply. (120VAC standard - 220VAC available)
• Internal Fuse Protection
• Unconditional Stability
• Each unit has a unique serial number and date code.
• Swept Data with each unit. (S21, S11, S22 and Noise Figure)
• Summary data sheet with each unit.
• Operating Temperature -20 to +70°C
Rack Mount Amplifier Options:
Digital control and interface for gain control, power on / off, and other features are available.
Connector types can be specified.
Gain and OP1dB values can be optimized to meet your requirement.
Operating temperature ranges can be increased to -54°C to +85°C.
All amplifiers can be optimized to your specific frequency of interest.
Temperature Compensation is available on all amplifiers.
Military or Space Screening is available.
Gain and Phase matching is available on most amplifiers.
196
16 - UP & DOWN CONVERTERS
RECIEVER FRONT ENDS &
TRANSCEIVERS
197
4 to 18GHz, UP/DOWN CONVERTER
PMI MODEL: PUC-4G18G-CD-1
PMI MODEL NUMBER PUC-4G18G-CD-1 IS AN AMPLIFIED UP/DOWNCONVERTER FOR THE FREQUENCY RANGE OF 4GHz TO 18GHz WITH AN
IF RANGE OF 10MHz to 100MHz. IT FEATURES A 32dB PROGRAMMABLE
ATTENUATOR WITH 10-BIT RESOLUTION, AND AN OUTPUT AMPLIFIER TO
PROVIDE CONVERSION GAIN. IT ALSO FEATURES AN IF TRANSFER
SWITCH TO SELECT THE UPPER OR LOWER SIDEBAND.
198
4 to 18GHz, UP/DOWN CONVERTER
PMI MODEL: PUC-4G18G-CD-1
CONVERSION GAIN IF=10MHz
RETURN LOSS LO (S11) & RF (S22)
CONVERSION GAIN IF=100MHz
199
PMI MODEL: PIFA-9D4G-1D8G-1
DOWN CONVERTER
PMI Model No. PIFA-9D4G-1D8G-1 is an integrated frequency down
converter used within Doppler Radar Systems. The RF Input is
9.4GHz +/- 30Mhz with an input dynamic range of 100 to 0dBm. The
LO Input is 2.803GHz +/- 15Mhz with a power level of +5 to
+7dBm. The resulting IF Output Frequency is 1.8GHz +/- 10MHz. The
RF to IF gain is 10dB to 13dB. This module incorporates internal RF,
IF and LO filtering and amplification for optimum out of band rejection
and superior electrical performance. The group delay ripple from RF to
IF Output is less than 0.1ns over a 20MHz bandwidth. The OIP3 is
greater than 25dBm. The module operates on single supply of +12
volts and is supplied with SMA female connectors in a package
measuring 1.8" x 1.15" x 0.4".
200
PMI MODEL: PIFA-9D4G-1D8G-1
DOWN CONVERTER
RX Frequency Range (J1)
9.41GHz +/- 30MHz
RX Power Range (J1)
-100dBm to 0dBm
RX High Pass Filter (J1)
8.0GHz Corner Frequency nom
LO Input Frequency (J2)
3.803GHz +/- 15MHz
LO Input Power (J2)
+5dBm to +7dBm
LO Band Pass Filter (J2)
7.2 to 8.5GHz (-3dB IL Nom)
LO Frequency to Mixer (J2)
7.610GHz +/- 30MHz
IF Output Power (J3)
13dBm max
IF Frequency (J3)
1.8GHz +/-10MHz
IF Bandpass Filter (J3)
75MHz Passband (-3dB nom)
VSWR
1.5:1 max (1.3:1 Preferred)
Noise Figure at Input (J1)
8dB max
Gain (J1 to J3)
10dB min, 13dB max
Group Delay Ripple (J1 to J3)
-0.1nsec/ 20MHz
OP3 (Output)
OP2 (Output)
Power Supply
>25 dBm (>28dBm Preferred)
>15dBm (>18dBm Preferred)
The module must be unconditionally stable when
terminated at J1, J2 and J3 with a short circuit in
all phases
Now apparent droop or distortion with a pulse
width of 500 to 1000 nSec at 500 to 2000 pps.
+12V @ 1A max
Power Supply Rejection
0.1dB/Volt max
RF Connectors
Size
SMA Jacks
1.8" x 1.15" x 0.4"
Output Signal Distortion
Stability
201
PMI MODEL: PTRAN-100M18G-70-MAH
OPEN VPX TRANSCEIVER (PHASEII)
PMI Model No. PTRAN-100M18G-70-MAH is a transceiver covering the frequency range of
100MHz to 18.0GHz. This unit up-converts a 100MHz to 4.0GHz transmit signal to the 2.0 to
18.0GHz frequency range. It also down-converts a 100MHz to 18.0GHz received signal to the
100MHz to 4.0GHz intermediate frequency range for analog to digital conversion. This is
supplied in Open VPX architecture.
202
PMI MODEL: PTRAN-100M18G-70-MAH
OPEN VPX TRANSCEIVER (PHASEII)
203
PMI MODEL: PTRAN-100M18G-70-MAH
OPEN VPX TRANSCEIVER (PHASEII)
Frequency
Inputs
J3 Input
Frequency
J5 Input
Frequency
Power Level
J7 Input
Frequency
Power Level
J8 Input
Frequency
Power Level
Outputs
J2
Frequency
Power Level
J4
Frequency
Power Level
J6
Frequency
Power Level
Control Logic
Power Supplies
Size
RF Connectors
100MHz to 18.0GHz
J3, J5, J7, J8
Input from RX Filter Bank
100MHz to 18.0GHz
-74dBm to -4dBm +/-3dBm (Assuming 6dB +/-3.5dB Gain in
RX Filter Bank)
IF Input from Backplane
100MHz to 4.0GHz
0dBm typ
LO1 from Backplane
4.0GHz to 20GHz
+15dBm typ
LO2 from the Backplane
4.0GHz to 20GHz
+15dBm typ
J2, J4, J6
Output to TX Filter Bank
100MHz to 18.0GHz
Undefined (Allow for 0 to +10dBm Out of TX Filter Bank)
IF Output to Backplane
100MHz to 4.0GHz
0dBm typical for Non-Linear SDLVA Channels
Output to RS Filter Bank
100MHz to 18.0GHz
Undefined
LVDS
+12V, -12V, +5V, +3.3V
5.55" x 3.68" x 0.89"
SMA(F)
Digital Connectors
30 Pin Headers to Connect to inrevium TB-FMCL-PH Board
Finish
Painted Gray - Epoxy Polomide Coating IAW MIL-C-22750,
Type I over Epoxy Polomide Primer IAW MIL-P-23377, Type I,
Class 1 or 3
Operating Temperature
-40 deg C to +85 deg C
Power Level
204
PMI MODEL: PTRAN-100M18G-70-MAH
OPEN VPX TRANSCEIVER (PHASEII)
205
PMI MODEL: PTRAN-100M18G-70-MAH
OPEN VPX TRANSCEIVER PHASE III
PMI Model No. PTRAN-100M18G-70-MAH (PHASEIII) is a transceiver covering the frequency
range of 100MHz to 18.0GHz. This unit up-converts a 100MHz to 4.0GHz transmit signal to the
2.0 to 18.0GHz frequency range. It also down-converts a 100MHz to 18.0GHz received signal to
the 100MHz to 4.0GHz intermediate frequency range for analog to digital conversion. This is
supplied in Open VPX architecture.










100 MHz to 18.0 GHz Transceiver
Less than 30 Watts Total Power Consumption
Time Gated SDLVA for Pulse Blanking
Up to 4 GHz Instantaneous Bandwidth
-80 to -10 dBm Input Dynamic Range
Customizable Switched Filter Banks
0 to +10 dBm Transmit Power
100 ns Switching Speed
VITA 07 RF Interface
CW Immunity
Over 300% Smaller than
Individual Components While
Still Maintaining 100 dB Isolation
206
PMI MODEL: PTRAN-100M18G-70-MAH
OPEN VPX TRANSCEIVER PHASE III
Frequency
Gain
Isolation
Switching Speed
Inputs
J1 Input:
Frequency
Power Level
J6 Input
Frequency
Power Level
Outputs
J3 Output:
Frequency
Power Level
Thru Channel Passband
Number of Filter Channels
Channel 1 Center Frequency
100MHz to 18.0GHz
18dB Typ
J1, J6 100dB
100ns
J1, J6
Input from Backplane
100MHz to 18.0GHz
-80 dBm to -10 dBm
Output to Transceiver
100Mhz to 18.0GHz
-52 dBm to -22 dBm
J3
Output to Transceiver
100MHz to 18.0GHz
-74 dBm to -4dBm typ
100MHz to 18.0GHz
5 Channels
3400MHz
3dB Bandwidth
2000MHz
Rejection
-40 dBc, typ (100MHz to 2GHz), -30dBc min
-40dBc typ (4.8 to 8.5GHz), -30dBc min
Channel 2 Center Frequency
5400MHz
3dB Bandwidth
2000MHz
Rejection
-40 dBc typ (100MHz to 4GHz), -30dBc min
-40 dBc typ (6.8 to 13.5GHz), -30dBc min
Channel 3 Center Frequency
7400MHz
3dB Bandwidth
2000MHz
Rejection
-40 dBc typ (100MHz to 6GHz), -30dBc min
-40 dBc typ (8.8 to 18GHz), -30dBc min
Channel 4 Center Frequency
9400MHz
3dB Bandwidth
2000MHz
Rejection
-40 dBc typ (100MHz to 8GHz), -30dBc min
-40 dBc typ (10.8 to 18GHz), -30dBc min
Channel 5 Center Frequency
3dB Bandwidth
Rejection
Control Logic
Power
Connectors
Digital/Power Connector
Size
Finish
Operating Temperature
11400MHz
2000MHz
-40 dBc typ (100MHz to 10GHz), -30dBc min
-40 dBc typ (12.8 to 18GHz), -30dBc min
3.3V TTL
+12V, -12V, +5V, +3.3V
SMA (F)
15PIN Micro-D Mating Connector Provided
4.925" x 3.68" x 0,35"
Painted Gray
-40ºC to +85 ºC
207
PMI MODEL: PTRAN-100M18G-70-MAH
OPEN VPX TRANSCEIVER PHASE III
PHASEIII TRANSCEIVER
RECEIVE SIDE SWITCH FILTER BANK
PHASEIII TRANSCEIVER
FULLY ASSEMBLED
PHASEIII TRANSCEIVER
TRANSMIT SIDE SWITCH FILTER BANK
208
PMI MODEL: PTRAN-100M18G-70-MAH
OPEN VPX TRANSCEIVER PHASE III
209
17 - SINGLE SIDEBAND
MODULATORS
210
PMI SINGLE SIDEBAND MODULATORS
PMI MODEL: PSM-0R5G2R5G-CD-1
INPUT PARAMETERS:
• RF Carrier: 0.5 to 2.5 GHz
• RF VSWR (RF= -10dBm, IF Modulation +10dBm: 2.0:1 Typ.
• RF Power at 1dB Compression Point (IF=+10dBm): +5dBm Typ.
• IF Modulation Frequency Range: DC to 500MHz
• IF Modulation Power Range (50Ω): +7dBm Min, +13dBm Max.
Transfer Characteristics:
• Conversion Loss: 13.5dB Max. (See Note #1)
• Carrier Suppression: 20dBc Min., 23dBc Typ
• Fundamental IF: 15dBc Min. Carrier: ±21F, 41F, etc.: 35dBc Typ.
• Carrier ±31F: 7dBc Typ.
• Quadrature Phase Accuracy, I/Q Mode: ±7.5º Typ, ±10º Max.
• Quadrature Amplitude Accuracy: ±1.5dB Typ., ±2.0dB Max.
•
•
•
•
•
•
0.5 to 2.5GHz
13.5dB Max. Conversion Loss
20dBc Carrier Suppression
5dBm Typ OP1dB
2:1 VSWR
±10º Quadrature Phase Accuracy
OUTPUT PARAMETERS:
• RF Frequency Range: 0.5 to 2.5GHz
• RF VSWR (RF=-10dBm, IF Modulation= +10dBm: 4.0:1 Typ.
FINISH:
• Nickel Plate
• Dimensions: 2.5” X 2.0” X 0.50”
Note #1: Insertion Loss relative to 0dBm RF Input
All Other Outputs including f0 are relative to the desired upper (f0+fm) Output.
211
PMI SINGLE SIDEBAND MODULATORS
PMI MODEL: PSM-0R5G2R5G-CD-1
INSERTION LOSS & RETURN LOSS
0º
90º
180º
270º
SIDEBAND & CARRIER PRODUCTS
500 MHz
1.5 GHz
2.5 GHz
212
PMI SINGLE SIDEBAND MODULATORS
PMI MODEL: PSM-50M1G-CD-1
INPUT PARAMETERS:
• RF Carrier: 0.5 to 1.0GHz
• RF VSWR (RF= -10dBm, IF Modulation +10dBm: 2.0:1 Typ.
• RF Power at 1dB Compression Point (IF=+10dBm): +5dBm Typ.
• IF Modulation Frequency Range: DC to 10MHz
• IF Modulation Power Range (50Ω): +7dBm Min, +13dBm Max.
Transfer Characteristics:
• Conversion Loss: 10dB Max. (See Note #1)
• Carrier Suppression: 15dBc Min., 20dBc Typ
• Quadrature Phase Accuracy, I/Q Mode: ±7.5º Typ, ±10º Max.
• Quadrature Amplitude Accuracy: ±1.5dB Typ., ±2.0dB Max.
•
•
•
•
•
•
0.05 to 1.0GHz
10dB Max. Conversion Loss
15dBc Carrier Suppression
5dBm Typ OP1dB
3:1 VSWR Max
±10º Quadrature Phase Accuracy
OUTPUT PARAMETERS:
• RF Frequency Range: 0.5 to 1.0GHz
• RF VSWR (RF=-10dBm, IF Modulation= +10dBm: 3.0:1 Typ.
FINISH:
• Nickel Plate
• Dimensions: 6.0” X 3.5” X 1.0”
Note #1: Insertion Loss relative to 0dBm RF Input
All Other Outputs including f0 are relative to the desired upper (f0+fm) Output.
213
PMI SINGLE SIDEBAND MODULATORS
PMI MODEL: PSM-50M1G-CD-1
6
214
18 - SMT & QFN PRODUCTS
215
QFN SMT LIMITER & AMPLIFIER
PSMT-0001
•
•
•
•
•
•
•
•
•
14.5 to 15.5 GHz
20dB Gain
2.5dB Noise Figure
+10dBm OP1dB
2.0:1 VSWR (In/Out)
+30dBm Max Input
3.5VDC @ 100mA
5mm X 5mm Size
32 Lead SMT Package
Representative picture of QFN
5mm X 5mm housing
Representative picture of how a
QFN component is made
216
20 WATT CW, SPDT SURFACE MOUNT SWITCH
PMI MODEL: P2T-14D415D4-15-SMT-20W

FREQUENCY
14.4 to 15.4 GHz

DESIGN
SPDT SURFACE MOUNT

POWER HANDLING
20 Watt

INSERTION LOSS
0.5dB

ISOLATION
15dB Min.

SIZE
0.35” X 0.50” X 0.21”
PMI Model No.P2T-14D415D4-15-SMT-20W is a driverless highpower SP2T switch in a compact package designed for surface mount
applications. This switch operates from 14.4 to 15.4GHz and has an
insertion loss of 1.2dB maximum at +25°C. The TX/RX isolation is
10dB minimum and this switch can handle input power levels up to
20 watts. The size of this SMT switch is 0.35" x 0.5" x 0.21".
217
19 - SOLID STATE SWITCHES
218
SOLID STATE SWITCHES
•
•
•
•
•
•
•
•
10 MHz to 40 GHz
SPST to SP64T
Reflective or Absorptive
High Speed
High Isolation
Low Loss
Video Filtering
Options Available:
•
•
•
Integrated Limiters or Amplifiers
Phase and/or Amplitude Matching
Analog or Digital Control options
219
18.0 to 40.0GHz, SPST, 90dB Switch
P1T-18G40G-90-1515-292FF
Frequency
18.0 to 40.0GHz
Isolation
90dB min.
Insertion Loss
5.0dB max.
VSWR In/Out
2.0:1 max.
Input Power
+23dBm CW max.
Switching Speed
25 nS max. / 15 nS typ
DC Voltage
+15VDC
-15VDC
Control Signal
0VDC "Low Loss"
5VDC "Isolation"
Connectors
2.92mm (F)
Average Isolation over 100dB
220
8.0 to 18.0GHz, 55dB, PULSE MODULATOR
PMI MODEL No: MPM-1002
PARAMETERS
SPECIFIED VALUE
TEST RESULTS
Frequency Range:
8.0 to 18.0GHz
8.0-18.0GHz
Input VSWR (50Ω):
2.0:1 Max
1.90:1
RF Input Power Handling:
0.5 Watts Min
Pass
Video Feedthru:
+2.0V Max
Pass
Insertion Loss:
2.5 dB Max
2.48dB
RFI Leakage:
65 dBc Min
>65.0dBc
Harmonics:
20 dBc Min
>20.0dBc
Isolation:
55 dB Min
61.03dB
Rise Time:
20ns Max
10.2ns
Fall Time:
50ns Max
18.5ns
Switching Time:
80ns Max
50% I/P to 90% O/P
33.4ns
DC Supply
+15VDC@+55mA Typ
+15VDC@56mA
221
8.0 to 18.0GHz, 55dB, SPST PULSE MODULATOR
PMI MODEL No: MPM-1002
SWITCHING SPEED
222
DC to 40 GHz, ULTRA-HIGH SPEED SWITCH
PMI MODEL: P1T-DC40G-65-T-292FF
PMI MODEL P1T-DC40G-65-T-292FF-1NS IS AN ULTRAHIGH SPEED (1nS), ABSORPTIVE, SINGLE POLE SINGLE
THROW PIN DIODE SWITCH THAT OPERATES FROM DC
TO 40 GHz. THIS MODEL INCORPORATES A TTL
COMPATIBLE DRIVER FOR EASY SYSTEM INTEGRATION.
Frequency
DC to 40.0GHz
Isolation
65dB typ, 55dB min
Insertion Loss
5.5dB typ, 6.8dB max
VSWR In/Out
2.0:1 typ, 2.2:1 max
Input Power
+17 dBm CW max
Switching Speed
5ns typ, 6ns max – Measured 2.7ns
Rise/Fall Time
0.9ns typ, 1ns max – Measured 0.6ns
Control Signal
TTL "1" = On
DC Voltage
+8 to +15V @15mA max – Measured 8mA
-8 to -15V @ 40mA max - Measured 27mA
Connectors In/Out
2.92mm(F)
Control Connectors
SMC
Size
1.2" x 1.3" x 0.5"
223
DC to 40 GHz, ULTRA-HIGH SPEED SWITCH
PMI MODEL: P1T-DC40G-65-T-292FF
224
500MHz to 40 GHz, HIGH SPEED SWITCH PMI
MODEL: P1T-500M40G-55-T-292FF
PMI Model No. P1T-500M40G-55-T-292FF is an SPST,
High Speed, Absorptive Switch. This switch operates at Frequency
a frequency range of .5 to 40.0GHz and is capable of
Isolation
switching within 100ns. It has 55dB of Isolation and
insertion loss of 5.5dB max.
Insertion Loss
0.5 to 40.0GHz
74dB typ, 55dB min.
5.5dB max.
VSWR In/Out
2.0:1 typ, 2.5:1 max.
Operating Input Power
+20dBm CW max
Switching Speed
25nsec typ, 100nsec max.
DC Voltage
±5V @ 20mA typ
Control Signal
TTL Compatible
"0" = On
"1" = Off
Connectors
2.92mm (F)
Finish
Painted Gray
Size
1.0" x 1.0" x 0.5"
225
24GHz to 40 GHz, HIGH SPEED SWITCH
PMI MODEL: P1T-24G40G-55-T-292FF
PMI MODEL P1T-24G40G-55-T-292FF-23DBM IS AN
ABSORPTIVE, HIGH SPEED, SINGLE POLE SINGLE
THROW SWITCH WITH A RISE/FALL OF 10ns AND A
SWITCHING SPEED OF 25ns.THE FREQUENCY RANGE
IS 24 TO 40 GHz WITH > 55 dB ISOLATION. THE INPUT
P1dB IS > 23 dBm.
PARAMETERS
SPECIFIED VALUE
TEST
RESULTS
Frequency Range:
24 to 40 GHz
24 to 40 GHz
Isolation:
55 dB Min.
69.65dB
Insertion Loss:
5.5 dB Max.
4.16dB
VSWR:
2.5:1 Typ.
2.29:1
Input Power:
+23dBm CW Min P1dB
+23dBm CW Min P1dB
RF Switching Speed:
25ns Max.
22ns Typ.
Rise/Fall:
10ns Max.
9ns Typ.
DC Voltage:
±5V
+5V – 20mA
-5V – 63mA
Control Signal:
TTL Compatible
“0” = Insertion Loss
“1” = Isolation
Pass
226
PMI MODEL: P2T-1G18G-10-R-5V-SFF-HIP10W
SP2T, 10 WATT, REFLECTIVE, SOLID STATE
SWITCH
•
•
•
•
•
1.0 TO 18.0 GHz Frequency Range
10 Watt Input Power Handling
5 VDC Single Supply
4.0dB Insertion Loss Max.
100nS Switching Speed Max.
Frequency
1.0 to 18.0GHz
Isolation
25dB typ, 10dB min
Insertion Loss
2.5dB typ, 4.0dB max
VSWR In/Out
2.0:1
Operating Input Power
5W CW max.
(Not to be switched any higher than
50kHz [PRI])
1dB Compression
+40dBm Goal
RF Switching Speed
<40ns typ, 100ns max
Impedance
50 ohms
DC Voltage and Current
+5V @ 35mA typ
Control Signal
TTL Logic
Connectors
SMA(F) - Removable
Finish
Painted Gray
Bottom side - Unpainted
Size
1.2" x 1.0" x 0.5"
227
PMI MODEL: P2T-5G5D15G-30-R-528-SFF-20W
SP2T, REFLECTIVE, 20 WATT, PIN DIODE
SWITCH
• 20 Watt RF Power Handling
• 200nS Switching Speed
• 2.0dB Insertion Loss Max.
Frequency
5000 to 5150MHz
Insertion Loss
1.5dB goal, 2.0dB max
Isolation
30dB min
Switching Speed
200ns typ
(Customer spec of 2us max)
Operating Input Power
+43dBm (20W) CW max.
VSWR In/Out
1.2:1 typ, 1.5:1 max
RF Connectors
SMA (F) Removable
Control
TTL
DC Voltage and Current
+5VDC @ 3mA typ
-28VDC @3mA typ
Finish
Painted Gray
Size
1.2" x 1.0" x 0.5"
228
PMI MODEL: P2T-5G5D15G-30-R-528-SFF-20W
SP2T, REFLECTIVE, 20 WATT, PIN DIODE
SWITCH
FULL PULSE – 200nS/Div.
J1-J2 Insertion Loss & Return Loss
J1-J2 Isolation
229
PMI MODEL: P2T-8G18G-45-R-SFF-HP20W
SP2T, REFLECTIVE, 20 WATT, PIN DIODE
SWITCH
PMI Model No. P2T-8G18G-45-R-SFF-HP20Wis an
SP2T, High Power(20 Watt), Reflective Switch. This
switch operates on a frequency of 8.0 to 18.0GHz. It
has a low insertion loss of 2.5dB max and an integral
TTL driver and is hermetically sealed.
Frequency
8.0 to 18.0GHz
Isolation
45dB min.
Insertion Loss
2.5dB max, 2.0dB typ
VSWR In / Out
2.0:1 max.
Rise Time
75ns typ (25ns measured)
Fall Time
25ns typ (10ns measured)
Delay On
150ns typ (55ns measured)
Delay Off
100ns typ (30ns measured)
Control
TTL
Operating Input Power
20W average or
1kW peak, 2% Duty Cycle
DC Supply
+5VDC @ 70mA Typical
-28VDC @ 3mA Typical
Connectors
SMA(F)
Size
1.2" x 1.0" x 0.5"
Sealing
Hermetic
230
PMI MODEL: P2T-8G18G-45-R-SFF-HP20W
SP2T, REFLECTIVE, 20 WATT, PIN DIODE SWITCH
J1-J2 INSERTION LOSS
& RETURN LOSS
J1-J3 INSERTION LOSS
& RETURN LOSS
J1-J2 ISOLATION
& RETURN LOSS
J1-J3 ISOLATION
& RETURN LOSS
231
20 WATT CW, SPDT SURFACE MOUNT SWITCH
PMI MODEL: P2T-14D415D4-15-SMT-20W

FREQUENCY
14.4 to 15.4 GHz

DESIGN
SPDT SURFACE MOUNT

POWER HANDLING
20 Watt

INSERTION LOSS
0.5dB

ISOLATION
15dB Min.

SIZE
0.35” X 0.50” X 0.21”
PMI Model No.P2T-14D415D4-15-SMT-20W is a driverless highpower SP2T switch in a compact package designed for surface mount
applications. This switch operates from 14.4 to 15.4GHz and has an
insertion loss of 1.2dB maximum at +25°C. The TX/RX isolation is
10dB minimum and this switch can handle input power levels up to
20 watts. The size of this SMT switch is 0.35" x 0.5" x 0.21".
232
100 WATT CW, SPDT, TERMINATED, SWITCH
PMI MODEL: P2T-6G18G-25-T-TFF-100W
PMI Model No. P2T-6G18G-25-T-TFF-100W is a single pole,
two throw, absorptive switch designed to operate over the
6.0 to 18.0GHz frequency range. This model is designed to
handle 100 watts average input power with the absorptive
section rated to handle 10 watts CW. The switch offers fast
switching speeds of 1usec maximum, low insertion loss of
2.0dB typically and high isolation of 25dB minimum. These
units offer phase tracking of less then ±5°. The DC supplies
are +28VDC and ±5VDC. The housing measures 1.79” x 0.60”
x 2.03” and is supplied with TNC Female connectors.
Frequency
6.0 to 18.0GHz
Insertion Loss
2.0dB Typical, 2.6dB Max.
Isolation
25dB Min.
Phase Tracking
±5 Degrees.
Switching Speed
1us Max.
Power Handling
100 Watts CW Min. (Absorptive Section
will handle 10 Watts CW Max.)
Mounting
Temperature
50 Degrees C, Mounting Surface to be
Gold Plated
VSWR
2.0:1 Max.
Control
2 Bit TTL
0 = Isolation
1 = Low Loss
Bias
+28VDC & ±5VDC
RF Connectors
TNC Female
Power & Control
Connector
9 Pin Micro-D Female, Mating with
M83513/03A/03C
Size
1.78" x 0.60" x 2.03"
Finish
Gold Plated
Switching Type:
Cold Switching
233
1.6 KILOWATT, SPDT, REFLECTIVE, SWITCH
PMI MODEL: P2T-6G18G-40-R-570-TFF-1D6KW
PMI Model No. P2T-6G18G-40-R-570-TFF-1D6KW is a reflective 1.6 kilowatt
high-power cold switching single pole double throw switch operating in the 6.0
to18.0 GHz frequency range.
Frequency Range
6.0 to 18.0 GHz
Power
1.6KW Peak
Duty Cycle
8%
Insertion Loss
2.2dB max. At band edges for 20% bandwidth
and typically 1.75 dB goal. For mid-band of 80%
of the bandwidth 2.0 dB max., and typically 1.5
dB goal.
Isolation
40 dB
Pulse Width
250 uSEC max.
Switching Speed
200 nS max. (50% TTL to 90% RF & 50% TTL to
10% RF)
VSWR In/Out
2:1 max.
Load VSWR
Better than 1.5:1
DC Voltage & Current
+5V @ 300mA and -70V @ 60mA
Control
Single TTL (TTL "0" J1 - J3 Low Loss)
Connector for RF Port
TNC Female
Connector for Control
9 pin micro D type female mating with
M83513/03A/03C
Size (Not Incl. Connectors)
2.00" x 2.00" x 0.75"
Finish
Painted Blue - No Paint on Mounting Surface
234
1.6 KILOWATT, SPDT, REFLECTIVE, SWITCH
PMI MODEL: P2T-6G18G-40-R-570-TFF-1D6KW
235
100 WATT CW, SPDT SWITCH
PMI MODEL : PEC-9R510R7-100W-SFF-SPDT
PARAMETER
SPECIFICATION
FREQUENCY
9.5 to 10.7 GHz
ISOLATION
40dB Min
INSERTION LOSS
1.5dB Typ
VSWR
2.0:1
RF INPUT POWER
120 WATTS CW MAX
SWITCHING SPEED
400nS Max
CONTROL LOGIC
“1” = J1-J2 Insertion Loss
“0” = J1-J3 Insertion Loss
DC POWER SUPPLY
=5 VDC @ 500mA
-28 VDC @ 100mA
236
40 WATT CW, SPDT, HIGH POWER SWITCH
PMI MODEL: P2T-1G1R1G-25-R-TFF-40W
PMI MODEL P2T-1G1R1G-25-R-TFF-40W IS A SINGLE POLE,
TWO THROW HERMETICALLY SEALED REFLECTIVE SWITCH
DESIGNED TO OPERATE OVER THE 1 GHz TO 1.1 GHz
FREQUENCY RANGE. THIS MODEL IS DESIGNED TO HANDLE
40 WATTS AVERAGE INPUT POWER AND 4KW PEAK HAVING A
3uSEC PULSE WIDTH AND 1% DUTY CYCLE.
Frequency
1.0 to 1.1GHz
Power
4KW Peak
Average Power
40W
Insertion Loss
0.8dB max – Measured 0.4dB
Isolation
25dB min
VSWR
1.5:1 – Measured 1.2:1
Rise Time
From 10% to 90% RF
Duty Cycle
1%
Pulse Width
3uS
PRF
600Hz
Switching Speed
300ns max
Switching Rate
2KHz
Cold Switching
Yes
Control
TTL
Power Supply
+50V @ 50mA – 18mA typ.
+5V @ 200mA – 63mA typ.
-12V @ 30mA – 0mA (Not Used)
Connectors
TNC Female (J1, J2, J3), 9-Pin Micro D
(DC/Control)
Size
3.92" x 2.68" x 0.70"
237
100 WATT CW, SPDT, HIGH POWER SWITCH
PMI MODEL: P2T-1G1R1G-25-R-TFF-100W
PMI Model No. P2T-1G1R1G-25-R-TFF-100W is a single
pole, two throw, hermetically sealed reflective switch
designed to operate over the 1.0 to 1.1GHz frequency
range. This model is designed to handle 100 Watts
average input power and 5KW peak having a 17usec
pulse width and 2% duty cycle.
Frequency
Power
Average Power
Insertion Loss
Isolation
Rise Time
Switching Delay
Duty Cycle
Pulse Width
PRF
Switching Speed
Switching Rate
Cold Switching
Power Supply
Control
Connectors
J4 Connections
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Size
1.0 to 1.1GHz
5KW Peak
100 Watts
0.8dB max
25dBm
275ns typ - From 10% to 90% RF
385ns typ - From 50% TTL to 10%90% RF
2%
17uS
600Hz
5uS max
2KHz
Yes
+50V @ 50mA
+5V @ 200mA
TTL
TNC Female (J1, J2, J3), 9-Pin Micro
D (DC/Control)
U1 +50V
Ground
U1 IN2 (CTRL J3)
U1 +5V
U1 IN1 (CTRL J2)
U1 Ground
U1 Ground
U1 Ground
U1 Ground
4.22" x 2.98" x 0.70"
238
Absorptive SP4T Solid State Switch
P4T-10G40G-60-T-292FF
Frequency
10.0 to 40.0GHz
Isolation
60dB min.
Insertion Loss
6.0dB max.
Insertion Loss Flatness
±1dB typical over full band
VSWR In/Out
2.0:1 max.
Input Power
200mW CW max. (+23dBm CW)
Switching Speed (10% to 90% RF)
30nsec typ.
DC Voltage and Current
+5VDC @ 75mA typical
-5VDC @ 45mA typical
Control Signal
2-BIt Decoded TTL Logic
RF Connectors
2.92mm
DC & Control
Solder Pins
Size
1.25" x 1.25" x 0.5"
Finish
Gold Plated
239
SP4T, Terminated, Solid State Switch
P4T-10G40G-60-T-GPO
Frequency
10.0 to 40.0GHz
Isolation
60dB min.
Insertion Loss
6.0dB max.
Insertion Loss Flatness
±1dB typical over full band
VSWR In/Out
2.0:1 max.
Input Power
200mW CW max. (+23dBm CW)
Switching Speed (10% to 90% RF)
30nsec typ.
DC Voltage and Current
+5VDC @ 75mA typical
-5VDC @ 45mA typical
Control Signal
2-BIt Decoded TTL Logic
RF Connectors
GPO - Limited Detent
DC & Control
Solder Pins
Size
1.25" x 1.25" x 0.5"
Finish
Gold Plated
240
SP4T, PHASE MATCHED SOLID STATE SWITCH
PMI MODEL: P4T-4G12G-35-R-SFF-PM
PARAMETERS
SPECIFICATIONS
FREQUENCY RANGE
4.0 TO 12.0 GHz
INSERTION LOSS
1.0 dB Typ
ISOLATION
35dB Min
VSWR
2.0:1
SWITCHING SPEED
20nS Typ “OFF”
30nS Typ “ON”
SWITCHING RATE
50nS Typ.
OPERATING RF POWER
0dBm Max
+10dBm Survival
PHASE MATCHING
±7.5º @ 12.0 GHz Max
(Arm to Arm per Unit)
DC POWER SUPPLY
±12VDC @ +100mA / 60mA
CONTROL LOGIC
2-Bit Decoder
241
50MHz to 40GHz, SP4T, High Speed Switch
P4T-50M40G-55-T-292FF
Frequency
0.05 to 40.0GHz
Isolation
75dB Typical, 55dB Min.
Insertion Loss
5.6dB Typical, 8dB Max.
VSWR In/Out
2.5:1 max.
Operating Input
Power
+20dBm CW max.
Switching Speed
100nsec max.
Measured 25nsec
DC Voltage and
Current
+12 to +15VDC @ 150mA
-12 to -15VDC @ 100mA max.
Control Signal
4-Bit TTL – Independent Control
Connectors
2.92mm(F)
Finish
Gold Plated
Size
2.0" x 1.0" x 0.4"
242
100MHz to 40GHz, SP4T, High Isolation Switch
P4T-100M40G-90-512-292FF-SP
Frequency
0.1 to 40.0GHz
Isolation
>100dB typ. (0.1 to 18GHz)
>95dB typ. (18 to 26.5GHz)
>77dB typ. (26.5 to 40GHz)
Insertion Loss
6dB typ. (0.1 to 18GHz) - Measured 3.85dB
8dB typ. (18 to 26.5GHz) - Measured 5.15dB
10dB typ. (26.5 to 40GHz) - Measured 5.58dB
VSWR In/Out
2.0:1 typ., 2.75:1 max.
Operating Input Power
+20dBm CW max.
Switching Speed
100nsec max.
Measured 25nsec "On"
Measured 75nsec "Off"
DC Voltage and Current
+5VDC @ 200mA max, 120mA typ.
-12VDC @ 100mA max., 65mA typ.
Control Signal
2-Bit Decoded TTL
Connectors
2.92mm(F)
Finish
Gold Plated
Size
2.0" x 1.0" x 0.4"
243
PMI MODEL: P5T-500M40G-60-T-55-292FF
SP5T, TERMINATED, SOLID STATE SWITCH
• SP5T, Terminated, Switch
• 500 MHz to 40 GHz Frequency Range
• 50nS On/Off Switching Speed
Frequency
0.5 to 40.0GHz
(Optimized for 5.0 to 40.0GHz)
Isolation
74dB Typical, 60dB min.
Insertion Loss
6dB Typical, 8.0dB max.
VSWR In/Out
2.5:1 max.
Operating Input Power
+20dBm CW max
Switching Speed (Rise/Fall)
15ns typ
Switching Speed (On/Off)
40ns Typical, 50ns max
DC Voltage & Current
+5VDC @ 55mA Typical
-5VDC @ 45mA Typical
Control
TTL
Connectors
2.92mm (F)
Finish
Gold Plated
244
SP6T, TERMINATED, SOLID STATE SWITCH
PMI MODEL: P6T-2G18G-60-T-512-SFF-LV
PMI Model No. P6T-2G18G-60-T-512-SFF-LV is a single pole, six
throw, absorptive, low video transient, solid state switch operating
over the frequency range of 2.0 to 18.0GHz. This model has a
maximum insertion loss of 4.0dB and a minimum isolation
specification of 60dB with video transients of 2mV typically. It
operates at 23dBm CW maximum and has a survival specification of
27dBm CW maximum and offers a typical switching speed of
30ns. The unit is supplied with removable SMA(F) connectors in a
hermetically sealed housing that measures 1.5" x 2.0" x 0.4".
Frequency
Insertion Loss
Tracking
Isolation
VSWR
Impedance
Input Power
Switching Speed
On
Off
Switching Rate PRF
Video Leakage
Control
Logic 0
Logic 1
DC Supply
Connectors
Size
Sealing
2.0 to 18.0GHz
4dB max
0.8dB window max
60dB max
Measured 78dB
2.0:1 max
50 OHMS
23dBm CW max (Operating)
27dBm CW max (Survival)
50ns max
Measured 30ns
50% TTL to 90% RF
50% TTL to 10% RF
5MHz
50mV Peak-Peak max
Measured at 300MHz BW
Measured 2mV
6 Line TTL Logic
1.6mA max SINK @ 0.4V
(Insertion Loss)
40uA max SOURCE @ 2.4
(Isolation)
+5VDC @ 300mA typ
-12VDC @ 100mA typ
SMA(F) Removable
1.5" x 2.0: x 0.4"
Hermetic
245
100MHz to 40GHz, SP8T, High Isolation Switch
P8T-100M40G-85-T-512-292FF
Frequency
0.1 to 40.0GHz
Isolation
>90dB (0.1 to 18GHz)
>80dB (18 to 26.5GHz)
>70dB typ. (26.5 to 40GHz)
Insertion Loss
10dB Max.
6dB typ. (0.1 to 18GHz
8dB typ. (18 to 26.5GHz)
10dB typ. (26.5 to 40GHz)
VSWR In/Out
2.5:1 max.
Operating Input Power
+20dBm CW max.
Switching Speed
100nsec max.
Measured 30nsec
DC Voltage and Current
+5VDC @ 180mA max, 67mA typ.
-12VDC @ 65mA
Control Signal
8-Bit TTL – Individual Control
“0” = Insertion Loss
“1” - Isolation
Connectors
2.92mm(F)
Finish
Gold Plated
Size
4.0" x 1.5" x 0.4"
246
PMI MODEL: P16T-100M20G-60-T-512-SFF
SP16T, TERMINATED, SOLID STATE,
PIN DIODE SWITCH
•
•
•
•
Single Pole 16 Throw
100 MHz TO 20 GHz Frequency Range
60dB Isolation
150nS On/Off Switching Speed
Frequency
0.1 to 20.0GHz
Insertion Loss
8.5dB typ
Isolation
60dB typ
VSWR In/Out
2.0:1
VSWR Output/Off
2.0:1
Switching Speed
Rise/Fall
15ns max
Delay On/Off
150ns max
Input Power
+20dBm CW
Survival Power
1 Watt CW, 10 Watts Peak, 1 usec
Control
TTL Logic
"0" = On
"1" = Off
Connectors
SMA (F) Removable
Power Supply
+5VDC @ 750mA max
-12VDC @ 200mA max
Size
8.0" x 3.0" x 0.65"
Finish
Gold Plated
247
PMI MODEL: P20T-4G8G-80-T-515-SFF
SP20T, TERMINATED, SOLID STATE,
PIN DIODE SWITCH
PMI Model No. P20T-4G8G-80-T-515-SFF is an absorptive,
single pole, twenty throw, pin diode switch that operates over the
4.0 to 8.0GHz, frequency range. This model incorporates a TTL
compatible driver for easy system integration.
Frequency
4.0 to 8.0GHz
Isolation
80dB min
Insertion Loss
4.0dB max
VSWR In/Out
2.0:1 max, 1.8:1 typ
Operating Input Power
100mW max CW (Hot Switchable)
RF Switching Speed
2usec max (50% TTL to 90% RF)
2usec max (10% RF to 90% RF)
DC Voltage
+5 VDC (±5%) @ 300mA max
+15VDC (±2%) @ 200mA max
Control Signal
5-Bit Decoded TTL
Connectors In/Out
SMA(F)
DC & Control Connectors
Solder Pins
Finish
Painted Blue
*Mounting surface to be free of paint
248
PMI MODEL: P20T-4G8G-80-T-515-SFF
SP20T, TERMINATED, SOLID STATE,
PIN DIODE SWITCH
TYPICAL ISOLATION & VSWR
 90dB Isolation
2.0:1 VSWR
TYPICAL INSERTION LOSS & RETURN LOSS
 4.0dB IL
249
PMI MODEL: P32T-0R5G18G-60-T-SFF
SP32T, TERMINATED, SOLID STATE,
PIN DIODE SWITCH
•
•
•
•
Single Pole 32 Throw
500 MHz TO 18 GHz Frequency Range
60dB Isolation
100nS On/Off Switching Speed
Frequency
0.5 to 18.0GHz
Insertion Loss
9.5dB max
Isolation
60dB min (0.5 to 2.0GHz)
70dB min (2.0 to 18.0GHz)
VSWR In/Out
2.0:1 max.
Switching Speed
100ns max
Input Power
20dBm CW max (Operating)
Survival Power
1 Watt CW, 10 Watts Peak, 1us
Control
5-Bit Decoded TTL
RF Connectors
SMA(F)
Control & Power
9 Pin Sub D Male
DC Supply
+5VDC @ 1600mA
-5VDC @ 200mA
Size
8.0" x 3.5" x 1.0"
250
PMI MODEL: P32T-0R5G18G-60-T-SFF
SP32T, TERMINATED, SOLID STATE,
PIN DIODE SWITCH
J33-J1 Insertion Loss & Return Loss
J33-J1 Isolation & Off Arm Termination
Switching Speed: ON Delay (50Ns per Division) OFF Delay (50Ns per Division)
251
20 - SWITCH MATRICES
252
SOLID STATE SWITCH MATRIX
Integration of SP8T, 20MHz to 3.0GHz Switch
Matrix with Integrated Power Dividers
FREQUENCY RANGE
20 – 3000 MHz
INSERTION LOSS
3.0dB Typ.
ISOLATION
55dB Typ.
VSWR
2.0:1 Max.
INPUT 1dB Compression Point
+25dB Typ.
SWITCHING SPEED
10µS OFF / 20µS ON
AMPLITUDE BALANCE
±0.25dB
PHASE BALANCE
±4.0º
VIDEO TRANSIENTS
Above 20MHz = -100dBm
Below 20MHz = -75dBm
DC POWER SUPPLY
+ 5VDC @ 450mA
-12VDC @ 250mA
253
SOLID STATE SWITCH MATRICES
20MHz TO 40GHz, 4x4, 8x8, 16x16 or 32x32
Blocking and Non-Blocking
Frequency
Range (GHz)
Number Of
Inputs To
Outputs
Insertion Loss
(dB)
Isolation
(dB)
OIP3
(dB)
Switching
Speed (nsec)
VSWR
Max. Input
Power (dBm,
CW)
Chassis
Size
SM-20M3G-4X4
0.02 - 3.0
4/4
10
60
45
100
2.0:1
20
6U, 19" Chassis
SM-20M3G-8X8
0.02 - 3.0
8/8
14
60
45
100
2.0:1
20
6U, 19" Chassis
SM-20M3G-16X16
0.02 - 3.0
16 / 16
16
60
45
100
2.0:1
20
6U, 19" Chassis
SM-20M3G-32X32
0.02 - 3.0
32 / 32
19
60
45
100
2.0:1
20
6U, 19" Chassis
SM-2G18G-4X4
2.0 - 18.0
4/4
14
60
45
100
2.0:1
20
6U, 19" Chassis
SM-2G18G-8X8
2.0 - 18.0
8/8
16
60
45
100
2.0:1
20
6U, 19" Chassis
SM-2G18G-16X16
2.0 - 18.0
16 / 16
19
60
45
100
2.0:1
20
6U, 19" Chassis
SM-2G18G-32X32
2.0 - 18.0
32 / 32
23
60
45
100
2.0:1
20
6U, 19" Chassis
SM-18G40G-4X4
18.0 - 40.0
4/4
16
60
45
100
2.0:1
20
6U, 19" Chassis
SM-18G40G-8X8
18.0 - 40.0
8/8
18
60
45
100
2.0:1
20
6U, 19" Chassis
SM-18G40G-16X16
18.0 - 40.0
16 / 16
22
60
45
100
2.0:1
20
6U, 19" Chassis
SM-18G40G-32X32
18.0 - 40.0
32 / 32
25
60
45
100
2.0:1
20
6U, 19" Chassis
Model Number
254
SOLID STATE SWITCH MATRICES
20MHz TO 40GHz, 4x4, 8x8, 16x16 or 32x32
Blocking and Non-Blocking
Switch Matrix Block Diagram
255
21 - SWITCH FILTER BANKS
256
8 TO 26.5GHz, 2 CHANNEL, SWITCH FILTER BANK
PMI MODEL No: 2SFB-8G26G-CD-SFF Rev C
Pass-Band
Frequency Range
8.62 to 8.70GHz
Insertion Loss
5.5dB max
Flatness
1.0dB max Peak-Peak
Isolation of RF Input from Power
and Control Outputs
50dB min (Between 8.0 and 26.5GHz)
VSWR
2.0:1 max across frequency range
Group Delay
1ns max (goal)
Reject Band
Frequency Range
17.24 to 17.4GHz
Rejection
20dB min
Bypass
FULL PULSE
Green Trace: TTL Signal
Yellow Trace: RF Signal
Frequency Range
8.0 to 26.5GHz
Insertion Loss
5.0dB max within ±2.0dB of max passband I.L.
Flatness
1.0dB max Peak-Peak over each 100MMHz
segment
VSWR
s.0:1 max across frequency range
Connectors
RF Input/Output
SMA(F) removable
RF Input/Output coupling
AC coupled
Input RF Power Level ( No
Damage)
+20dBm CW max (powered and
unpowered)
Input IP3
(pin = -10dBm, DeltaF = 2MHz)
+27dBm max, +32dBm typ
Switching Speed
100ns max
Voltage
+5V ± 5% @ 100mA max
Logic Input
TTL/ CMOS +5V Compatible
Size
1.5" x 0.8" x 0.5"
257
2 TO 18GHz, 4 CHANNEL, SWITCH FILTER BANK
PMI MODEL: 4SFB-2G18G-CD-SFF
• 4-Way Switch Filter Bank
• Low Harmonic Distortion
• 0.5 Watt RF Power Handling
Using Interdigital Filters
PARAMETERS
SPECIFICATIONS
FREQUENCY RANGE
2.0 TO 18.0 GHz
INSERTION LOSS
7.0dB Max
ISOLATION
60dBc Min
PASS BAND OVERLAP
10 MHz Min
50 MHz Max
POWER HANDLING
+27dBm Min
VIDEO FEED THRU
-65dBm Max
@ 1MHz BW, 0.4 to 18.0 GHz
LOW END REJECTION
24dB/Octave in all four channels
FILTER A
PASS BAND
50 dBc Stop Band
50 dBc Stop Band
2.0 – 3.5 GHz
4.0 – 7.0 GHz
DC – 0.4 GHz
FILTER B
PASS BAND
50 dBc Stop Band
50 dBc Stop Band
3.5 – 6.0 GHz
8.0 – 12.0 GHz
DC – 0.4 GHz
FILTER C
PASS BAND
50 dBc Stop Band
50 dBc Stop Band
6.0 – 10.4 GHz
12.0 – 18.0 GHz
DC – 0.4 GHz
FILTER D
PASS BAND
10.4 – 18.0 GHz
HARMONICS
-65dBc Min
PASS BAND VSWR
2.0:1 Max
DC POWER SUPPLY
±15VDC @ +100mA / -50mA
SWITCHING SPEED
500nS Max On/Off
258
1 to 18 GHz, 6 CHANNEL, INTEGRATED,
DOUBLE SIDED, SWITCH FILTER BANK
PMI MODEL No: 6SFB-CC-100M18G-MAH-RX-TX
RECEIVE –SIDE FILTER BANK
Frequency Range
Gain
100MHz to 18.0GHz
6dB Typ
Isolation
Switching Speed
J1, J6 100dB
100ns
Inputs
J1 Input:
J1, J6
Input from Backplane
Frequency
100MHz to 18.0GHz
Power Level
J6 Input
-80 dBm to -10 dBm
Output to Transceiver
Frequency
Power Level
Outputs
J3 Output:
Frequency
Power Level
Thru Channel Passband
Number of Filter Channels
Channel 1 Center Frequency
J3
Output to Transceiver
100MHz to 18.0GHz
-74 dBm to -4dBm typ
100MHz to 18.0GHz
5 Channels
3400MHz
3dB Bandwidth
2000MHz
Rejection
-40 dBc (100MHz to 2GHz)
-40dBc (4.8 to 8.5GHz)
Channel 2 Center Frequency
TRANSMIT-SIDE FILTER BANK
100Mhz to 18.0GHz
-52 dBm to -22 dBm
5400MHz
3dB Bandwidth
2000MHz
Rejection
-40 dBc (100MHz to 4GHz)
-40 dBc (6.8 to 13.5GHz)
Channel 3 Center Frequency
3dB Bandwidth
Rejection
Channel 4 Center Frequency
7400MHz
2000MHz
-40 dBc (100MHz to 6GHz)
-40 dBc (8.8 to 18GHz)
9400MHz
3dB Bandwidth
2000MHz
Rejection
-40 dBc (100MHz to 8GHz)
-40 dBc (10.8 to 18GHz)
Channel 5 Center Frequency
11400MHz
3dB Bandwidth
2000MHz
Rejection
-40 dBc (100MHz to 10GHz)
-40 dBc (12.8 to 18GHz)
Control Logic
Power
3.3V TTL
Connectors
SMA (F)
Digital/Power Connector
15PIN Micro-D Mating Connector Provided
Size
4.925" x 3.68" x 0,35"
Finish
Operating Temperature
Painted Gray
-40ºC to +85 ºC
+12V, -12V, +5V, +3.3V
259
950MHz to 18 GHz, 8 CHANNEL, SWITCH FILTER BANK
PMI MODEL No: 8SFB-950M18G-CD-SFF
Number of Filter Channels
Channel 1 Specifications:
Channel 1Passband Frequency
Channel 1 High Side Rejection
Channel 2 Specifications:
Channel 2 Passband Frequency
Channel 2 Low Side Rejection
Channel 2 High Side Rejection
Channel 3 Specifications:
Channel 3 Passband Frequency
Channel 3 Low Side Rejection
Channel 3 High Side Rejection
Channel 8 Thru Path
Channel 4 Specifications:
Channel 4 Passband Frequency
Channel 4 Low Side Rejection
Channel 4 High Side Rejection
Channel 5 Specifications:
Channel 5 Passband Frequency
Channel 5 Low Side Rejection
Channel 5 High Side Rejection
Channel 6 Specifications:
Channel 6 Passband Frequency
Channel 6 Low Side Rejection
Channel 6 High Side Rejection
Channel 7 Specifications:
Channel 7 Passband Frequency
Channel 7 Low Side Rejection
Channel 7 High Side Rejection
Channel 8 Specifications:
Channel 8 Passband Frequency
Common Specifications:
Insertion Loss
VSWR
Impedance
Switching Speed
Control
Power Supply
Connectors
Size
Finish
8 Channels
0.95 to 6.05GHz
-55dB @ 6.9 to 18.0GHz
5.15 to 8.25GHz
-55dB @ DC to 4.3GHz
-55dB @ 9.0 to 18.0GHz
7.35 to 10.75
-55dB @ DC to 6.5GHz
-45dB @ 11.3GHz
-55dB @ 12.5 to 18.0GHz
9.85 to 13.15GHz
-55dB @ DC to 9.2GHz
-55dB @ 13.8 to 18.0GHz
12.25 to 15.65GHz
-55dB @ DC to 11.5GHz
-55dB @ 16.2 to 18.0GHz
14.75 to 16.45GHz
-55dB @ DC to 14.0GHz
-55dB @ 16.8 to 18.0GHz
15.55 to 18.05GHz
-55dB @ DC to 14.0GHz
Not Specified
Pass Through - 0.95 to 18.05GHz
9.0dB Typ. (All passbands equalized to within 3dB)
2.0:1 max.
50 Ohms
60nsec Typical, 100nsec max.
3 Line Decoded TTL
200mA @ +15VDC max.
200mA @ -15VDC max.
SMA(F)
4.33"L x 5.10"W x 0.98"H
Painted Gray
260
950MHz to 18 GHz, 8 CHANNEL, SWITCH FILTER BANK
PMI MODEL No: 8SFB-950M18G-CD-SFF
Switching Speed
OFF Delay – 100Ns/Div.
FULL PULSE – 200nS/Div.
261
22 - THRESHOLD DETECTORS
262
PMI MODEL: GMTA-1002
HIGH SPEED THRESHOLD DETECTOR
PARAMETERS
SPECIFIED VALUE
TEST
RESULTS
FREQUENCY
RANGE
2.0 to 18.0 GHz
2.0 to 18.0 GHz
THRESHOLD
LEVEL
Pin = -18 TO -23 dBm
@ 25 ° C
-20.75 dBm
RESPONSE TIME
@ TTL “ I ” / TTL “ O ”
100 µs max
11us
INPUT
VSWR
2.5 : 1 @ Pin =-10 dBm
2.216:1
DC POWER SUPPLY
NO RF SIGNAL
+12V @ 50 mA
41 mA
THRESHOLD SETTING STABILITY +/- 3 dB MAX OVER FREQUENCY TEMPERATURE
FREQ.
2 GHz
4 GHz
6 GHz
8 GHz
10 GHz
12 GHz
14 GHz
16 GHz
18 GHz
Pin
@ 25 ° C
-21.0
-20.5
-21.0
-20.5
-21.5
-21.5
-20.0
-20.0
-21.0
Pin
@0°C
-21.0
-20.5
-21.0
-20.5
-21.5
-22.0
-20.0
-20.0
-21.5
Pin
@ 85 ° C
-20.5
-20.0
-20.5
-20.5
-21.0
-21.0
-19.5
-19.5
-20.0
263
PMI MODEL: TD-6G18G-CD-SFF
HIGH SPEED THRESHOLD DETECTOR
PMI Model No. TD-6G18G-CD-SFF is a high speed threshold
detector designed to operate over the 6.0 to 18.0GHz frequency
range with an adjustable threshold level of -30 to +10dBm and
a VSWR of 3.0:1 max. The unit is supplied with removable
SMA female connectors in a compact housing that measures
1.0" x 0.6" x 0.19".
Frequency
6.0GHz to 18.0GHz
Dynamic Range
-Setting
-30 to -10dBm
-Pulse Signal
-26 to +10dBm
Flatness
+/-1.5dB max
Propagation Delay
20nsec typ, 30nsec max
Output
TTL Compatible
Recovery Time
(Or Pulse Stretching)
150 nsec max
VSWR @ -20dBm or Lower
3.0:1 max
Power Supply
+/-12 or +/-15 Volts, Resistive
Setting is Optional
Connectors In/Out
SMA(F)
Size
1.0" x 0.6" x 0.19"
Finish
Gold Plated
264
PMI MODEL: TD-6G18G-CD-SFF
HIGH SPEED THRESHOLD DETECTOR
Propagation Delay 15.085nS
VSWR 2.846:1
265
2MHz to 18.0GHz Threshold Detector
CDT-2M18-30-BB-DE-D
“ON” 502nS
“OFF” 1.24µS
Frequency Range
0.002 to 18.0GHz
VSWR
1.9:1 Maximum
Thru Path Insertion Loss
2.5dB Maximum
Power Range
Operational: -30 to 0dBm
(10kHz, Video Bandwidth)
Output Polarity
Positive
RF Connectors
SMA
RF Damage Level
+28dBm Minimum
Threshold Level
0 to 2.5VDC
Detected Output
0 to 2.5VDC
DC Power Supply +V
+15 Volts @ 100mA
DC Power Supply -V
-15 Volts @ 40mA
Size
2.5" x 2.90" x 0.50"
Weight
3 Ounces Typical
266
2MHz to 18.0GHz Threshold Detector
CDT-2M18-30-BB-DE-D
Video Output (mV) vs. Power Input (dBm)
Thru Path Insertion loss & Return Loss
267
100MHz to 10.0GHz Threshold Detector
PMI MODEL No: TDC-30T-0110-CD-1
PARAMETERS
SPECIFIED VALUE
Frequency Range:
0.1 to 10 GHz
Insertion Gain:
8 dB Nominal
VSWR:
2.0:1
Frequency Flatness:
±1.5 dB Typ,
±2.0 dB Max
Threshold Level:
Adjustable
Threshold Variation:
±0.5 dB Typical
over any 1 GHz
Propagation Delay:
20 ns Max, 15 ns Typ
Output Pulse Width When Input:
-20 dBm to -10 dBm
-10 dBm to +0 dBm
-10 dBm to +10 dBm
-20 dBm to +10 dBm
Within 10 ns of Input Pulse Width
Within 10 ns of Input Pulse Width
Within 25 ns of Input Pulse Width
Within 25 ns of Input Pulse Width
Power Supply:
+12 VDC @ 150 mA Max
-12 VDC @ 100 mA Max
268
100MHz to 10.0GHz Threshold Detector
PMI MODEL No: TDC-30T-0110-CD-1
PROPAGATION DELAY
YELLOW = INPUT
GREEN = OUTPUT
269
1GHz to 12GHz Threshold Detector
PMI MODEL: TD-1G12G-RL-CD-SFF
Frequency
1.0 to 12.0GHz min
VSWR
3.0:1 typ
Dynamic Range
-30dBm to -10dBm
Threshold Variation
(With Frequency)
+/-1.5dB max
Propagation Delay
10ns typ, 3dB above threshold setting (50%
RF Input to 50% Logic at -10dBm)
Minimum Pulse Width
50ns typ
Output
TTL "0" Input Power > Threshold Setting
TTL "1" Otherwise
Temperature Stability
1.0dB typ
3dB Above Threshold Setting
Threshold Setting Control
External Voltage
0 to +5V
Threshold Level Setting Range
-30 to -10dBm
Input Power
100mW CW max
Power Supply
+/-5V @ 100mA typ
Propagation Delay – Full Pulse
Connectors
RF
Removable SMA(F)
Output
Removable SMA(F)
Threshold Adjust
Solder Pin
Size
1.1" 0.6" 0.19"
Finish
Gold Plated
270
1GHz to 12GHz Threshold Detector
PMI MODEL: TD-1G12G-RL-CD-SFF
ON DELAY
OFF DELAY
VSWR
PLOT
271
23 - USB PRODUCTS
272
PMI MODEL: P2T-500M40G-USB
500MHz TO 40GHz, 60dB Isolation,
Absorptive, USB Switch
Features:
 Low Insertion Loss
 High isolation
 USB 2.0 Controlled
 Ultra-Broad Band Operation
Frequency
0.5 to 40.0GHz
Isolation
60dB min.
Insertion Loss
6.0dB max.
VSWR In/Out
2.5:1 max.
Input Power
+20dBm CW max
Survival Power
1 Watt Peak, 1usec
Connectors In/Out
2.92mm(F)
Power and Control Connector
USB Type A Plug
Size
2.25" x 1.0" x 0.33"
Finish
Painted Gray
Driverless Installation
Simply run the PMI provided application
from any Windows computer
*Tested for compatibility on Windows
XP and Windows 7
No External Power Supplies
Powered through USB
273
PMI MODEL: P2T-500M40G-USB
500MHz TO 40GHz, 60dB Isolation,
Absorptive, USB Switch
Insertion & Return Loss
J1 – J2
Rise Time
PMI GUI Interface
Insertion & Return Loss
J1 – J3
Fall Time
274
PMI MODEL: AMP-12-50M40G-USB
50MHz TO 40GHz, 12dB Gain,
Low Noise, USB Amplifier
Features:
 Low Noise
 Excellent Gain Flatness
 Ultra-Broadband Operation
 USB 2.0 Controlled
Frequency
0.05 to 18.0GHz
Gain
12dB typical
Gain Flatness
±2.5dB typical
VSWR In/Out
2.3:1 typical
OP1dB
+10dBm typical
Noise Figure
4.5dB Typical
DC Supply
USB 2.0
Connectors
SMA(F)
Finish
Epoxy Paint Gray
Size
2.25" x 1.0" x 0.33"
275
PMI MODEL: AMP-12-50M40G-USB
50MHz TO 40GHz, 12dB Gain,
Low Noise, USB Amplifier
Gain & Return Loss
276
PMI MODEL: ANT-30-100M40G-USB
100MHz TO 40GHz, 30dB Attenuation,
USB Attenuator
Features:
 Low Loss
 30dB Dynamic Range
 Ultra-Broad Band Operation
 USB 2.0 Controlled
Frequency
0.1 to 40.0GHz
Attenuation Range
30dB
Insertion Loss
5dB Typical up to 20GHz
8dB Typical up to 40GHz
VSWR In/Out
2.5:1 typical
Attenuation Accuracy
±2.5dB Typical
Attenuation Step Size
1dB
Connectors
2.92mm (F)
Power Connector
USB type A plug
Size
2.25" x 1.0" x 0.33"
Finish
Painted Gray
Driverless Instalation
Simply run through the PMI provided
application from any windows
computer
*Tested for compatibility on Windows
XP and Windows 7
No External Power
Supplies
Powered through USB
277
PMI MODEL: ANT-30-100M40G-USB
100MHz TO 40GHz, 30dB Attenuation,
USB Attenuator
Insertion & Return Loss
30dB Attenuation
278