IF2
In
Det
Out
XP1005
XU1004
LO In
1/2 Frequency
RF
x2
RF
BUFFER
LO
DOUBLER BUFFER
BALANCED
MIXER
POWER AMPLIFIER
New products + Short Form product catalog
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
G=17dB
IF1
In
Printed
BPF
IR Mixer
IR~22dB
XR1004
IF2
Out
LNA
LO In
1/2 Frequency
IMAGE
REJECT
MIXER
x2
LO
DOUBLER BUFFER
IF1
Out
LO(+15dBm)
20.5-22.5 GHz
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
IF2
In
G=17dB
Printed
BPF
IR Mixer
IR~22dB
Det
Out
XP1005
Ref
Out
LO(+15dBm)
20.5-22.5 GHz
XU1004
LO In
1/2 Frequency
RF
x2
LO
DOUBLER BUFFER
RF
BUFFER
BALANCED
MIXER
RF
Out
POWER AMPLIFIER
IF1
In
XR1004
IF2
Out
DIPLEXER
LNA
LO In
1/2 Frequency
IMAGE
REJECT
MIXER
x2
RF
In
LO
DOUBLER BUFFER
IF1
Out
GaAs Semiconductors
RF
In
N E W P RO D U C T S – O C TO B E R 2 0 0 8
Buffer Amplifiers
Description
Part Number
Buffer Amplifier
(QFN)
XB1012-QT
Frequency
(GHz)
Gain
(dB)
Gain
Flatness
(dB)
Noise
Figure
(dB)
0.25-6.0
10.0*
+/- 0.5
4.0
Output P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
Package
Applications
+23.0
+25.0
+36.0
+39.0
120 @ 5.0
120 @ 8.0
-QT
(3x3 mm)
I/P
*@ 6 GHz
Gain Blocks
Part Number
Frequency
(GHz)
P1dB
(dBm)
Gain
(dB)
OIP3
(dBm)
NF
(dB)
Icc
(mA)
XR1002
NF~3.0dB
Rth
Vd / Vs
(Volts)
Package
Applications
Deg/W
CGB8001-SC
(@ 2450 MHz)
DC-2.8
+27.0
15.5
-
3.9
RF IN
150 27.5-29.5
+5.0GHz
/ +5.0
-20dBm to -80dBm
CGB8002-SC
(@ 2450 MHz)
DC-2.8
+22.5
15.8
+37.0
4.7
120
+3.3 / +3.3
35
-SC
(SOT-89)
I/S/P/D
XG1001-SA
(dual channel)
0.05-4.0
+22.5
(+26.0*)
13.0
+41.0
(+44.0*)
2.1
150
+3.3 / +5.0
27
-SA
(SOIC-8)
I/S/P/D
Vs is supply voltage
Printe
BPF
IR Mixer
G=14dB
35
-SC IR~18dB
I/S/P/D
(SOT-89)
Atten=0-12dB
LO(+15dBm)
23.5-25.5 GHz
Unless otherwise specified, data is @ 900 MHz.
• *balanced configuration
Power Amplifiers
Description
Part Number
Power Amplifier
(@ 900 MHz)
XP1052-SC
Power Amplifier
XR1002 0.1-3.0
NF~3.0dB
XP1053-SD
RF IN
XP9003
24.5-26.5 GHz
Power Amplifier
-20dBm to -80dBm
Power Amplifier
XP1066-SD
Power Amplifier
(QFN)
CHV2720-QJ
Power Amplifier
(QFN)
XP1065-QJ
Power Amplifier
(QFN)
XP1048-QJ
Power Amplifier
PowerAmplifier
(QFN)
Power Amplifier
PowerAmplifier
(QFN)
Power Amplifier
Frequency
(GHz)
XP1044-QL
XP1039-QJ
XP1035-BD
XP1050-QJ
0.8-0.95
G=17dB
1.6
Gain
(dB)
Gain Flatness
(dB)
Output P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
18.5
+/- 0.5
+29.5
+44.0
16.5
+/- 0.25 Printed +30.5
+41.0
IR Mixer
IR~22dB
Package
Applications
500 @ 5.0
-SC
(SOT-89)
I
420 @ 5.0
-SD
(SOIC-8)
I
-
2900 @ 9.0
(40x42.8 mm)
S
+41.0
420 @ 5.0
-SD
(SOIC-8)
I
AGC Control
+39.0 Range=60
+51.0*
Dynamic
dB
160 @ 12.0
-QJ
(6x6 mm)
I
BPF
38.0
+/- 0.5
+43.0
1.8-2.2
11.5
+/- 0.25
+30.5
2.3-2.7
11.0
+/- 0.5
2.3-2.7
16.0
+/- 0.5
LO(+15dBm)
20.5-22.5 GHz
+34.5
+46.0**
550 @ 8.0
-QJ
(6x6 mm)
I
3.3-3.8
13.0
+/- 0.5
+34.5
+46.0**
600 @ 8.0
-QJ
(6x6 mm)
I
4.9-5.9
17.0
+/- 0.5
+34.5
+46.0**
800 @ 8.0
-QL
(7x7 mm)
I
5.6-7.1
16.0
+/- 0.5
+35.5
+49.0
1200 @ 8.0
-QJ
(6x6 mm)
I/P
IF2
In
5.9-9.5
7.1-8.5
26.0
16.0
+/- 1.0
LO In
1/2+/Frequency
0.5
+29.0
XU1004
12.0-16.0
21.0
+/- 1.0
+39.0
Det
Out
XP1005
500 @ 6.0
DIE
P
-QJ
(6x6 mm)
I/P
RF
x2
+35.5
LO
DOUBLER BUFFER
XP1042-BD
IF Out
4 GHz
+25.0
+49.0
1200
@ 8.0
RF
BUFFER
BALANCED
MIXER
+38.0
500 @ 5.0
DIE
P
POWER AMPLIFIER
Power Amplifier
(QFN)
Power Amplifier
XP1042-QT
XP1043-BD
12.0-16.0
12.0-16.0
21.0
21.5
+/- 1.0
+/- 1.0
+25.0
+30.0
+38.0
IF1
In
+41.0
500 @ 5.0
700 @
XR1004
7.0
-QT
(3x3 mm)
P
IF2
Out
DIE
P
*EVM = 2.5% @ 1W • **EVM = 2.5% @ 0.5W
LNA
Production Devices
Pre-production Devices
I - Infrastructure
LO In
1/2 Frequency
S - SatCom
Characteristic Data and Specifications are subject to change without notice. • October 2008 • www.mimixbroadband.com
IMAGE
REJECT
MIXER
x2
P - Point-to-Point
LO
DOUBLER BUFFER
IF1
Out
D - Defense
RF
In
Re
Ou
Power Amplifiers (cont.)
Description
Part Number
Power Amplifier
(QFN)
XP1043-QH
XP1059-BD
Power Amplifier
XP1057-BD
Power Amplifier
XP1058-BD
Power Amplifier
XP1070-BD
Power Amplifier
XP1071-BD
Power Amplifier
XP1051-QH
Power Amplifier
(QFN)
XP1054-BD
Power Amplifier
XP1072-BD
Power Amplifier
XP1073-BD
Power Amplifier
XP1055-BD
Power Amplifier
XP1056-BD
Power Amplifier
Frequency
(GHz)
Gain
(dB)
Gain Flatness
(dB)
Output P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
Package
Applications
12.0-16.0
21.5
+/- 1.0
+30.0
+41.0
700 @ 7.0
-QH
(4x4 mm)
P
13.5-15.0
28.0
+/- 1.0
+36.0
+46.0
2.1 A @ 8.0
DIE
S/D
13.5-16.0
17.0
+/- 1.0
+39.0
+48.0
4.0 A @ 8.0
DIE
S/P/D
14.0-16.0
27.0
+/- 1.0
+36.0
+45.0
2.1 A @ 8.0
DIE
S/P/D
14.5-17.0
17.0
+/- 1.0
+39.0
+48.0
4.0 A @ 8.0
DIE
S/P/D
14.5-17.0
27.0
+/- 1.0
+36.0
+45.0
2.1 A
@ 8.0
XR1002
DIE
S/P/D
NF~3.0dB
29.5-30.0
16.0
+30.0
(Psat)
+/- 0.5
-
1000 @ 5.0
-QH
(4x4 mm)
S
DIE
D
RF IN
G=14dB
27.5-29.5
- GHz 1.9 A @ 6.0
-20dBm to -80dBm
IR Mixer
IR~18dB
33.0-36.0
20.0
+/- 1.0
+34.5
(Psat)
33.0-37.0
22.0
+/- 1.0
+35.0
(Psat)
-
2.2 A @ 6.0
DIE
D
33.0-37.0
21.0
+/- 1.0
+37.0
(Psat)
-
4.4 A @ 6.0
DIE
D
34.0-36.0
20.0
+/- 1.0
+33.5
(Psat)
-
1.9 A @ 6.0
DIE
Atten=0-12dB
34.5-38.0
13.0
+26.0
(Psat)
+/- 1.0
-
190 @ 6.0
Printe
BPF
D
LO(+15dBm)
23.5-25.5
GHz
D
DIE
Receivers
Description
Receiver
(QFN)
Part Number
XR1015-QH NF~3.0dB
10.0-16.0
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
Transmitters
Description
Up-Converter
Up-Converter
(QFN)
RF
LO
Frequency Frequency
XR1002
(GHz)
(GHz)
Part Number
XU1014-BD
XU1014-QH
N
E W
G=17dB
7.0-19.0
IF
Bandwidth
(GHz)
DC-3.5
IR Mixer
IR~22dB
RF
LO
Frequency Frequency
(GHz)
(GHz)
Conversion Noise Figure Image LO Input
Gain
(dB)
Rejection Power
(dB)
(dBc)
(dBm)
12.0
2.5
Printed
BPF
IF
Bandwidth
(GHz)
Conversion
Gain
(dB)
20.0
Bias
(mA @ V)
Package
Applications
-QH
(4x4 mm)
P/D
+5.0
170 @ 4.0
Output
IP3
(dBm)
Bias
(mA @ V)
Package
Applications
IF Out
4 GHz
LO
Output
Input Power
P1dB
AGC Control
(dBm)
(dBm)
Dynamic Range=60 dB
8.0-18.0
5.0-21.0
DC-3.5
-10.0
+5.0
+2.0
+12.0
80 @ 4.0
DIE
P/D
8.0-18.0
5.0-21.0
LO(+15dBm)
DC-3.5
-10.0
20.5-22.5 GHz
+5.0
+2.0
+12.0
80 @ 4.0
-QH
(4x4 mm)
P/D
P
D
R O D U C T I O N
IF2
In
The following parts are now in production:
CMM0016-BD Power Amplifier
XG1001-SA Gain Block
XL1010-BD Low Noise Amplifier
XL1010-QT Low Noise Amplifier (QFN)
XM1003-BD Image Reject Mixer
XP1035-BD Power Amplifier
E V I C E S
XU1004
XP9003 Power Amplifier
RF
XR1011-BD Receiver
RF
BUFFER
XR1011-QH
Receiver (QFN)
BALANCED
MIXER
XX1007-BD Doubler
XX1007-QT Doubler (QFN)
XP1035-QH Power Amplifier (QFN)
LO In
XP1042-BD Power
Amplifierx2
1/2 Frequency
LO
XP1042-QT Power Amplifier DOUBLER
(QFN)
BUFFER
XP1043-BD Power Amplifier
XP1043-QH Power Amplifier (QFN)
XP1050-QJ Power Amplifier (QFN)
IF1
In
Det
Out
XP1005
XR1004
POWER AMPLIFIER
IF2
Out
LNA
Production Devices
Pre-production Devices
I - Infrastructure
S
LO In
- SatCom
1/2 Frequency
x2
IMAGE
REJECT
MIXER
P - Point-to-Point
LO
DOUBLER BUFFER
Characteristic Data and Specifications are subject to change without notice. • October 2008 • www.mimixbroadband.com
© 2008 All Rights Reserved. Mimix Broadband, Inc. • Mimix Broadband is a registered trademark of Mimix Broadband, Inc.
Any rights not expressly granted herein are reserved.
IF1
Out
D - Defense
RF
In
Re
Ou
IF2
In
Det
Out
XP1005
XU1004
LO In
1/2 Frequency
RF
x2
RF
BUFFER
LO
DOUBLER BUFFER
BALANCED
MIXER
September 2007 Short-Form Product Catalog
POWER AMPLIFIER
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
G=17dB
IF1
In
Printed
BPF
IR Mixer
IR~22dB
XR1004
IF2
Out
LNA
LO In
1/2 Frequency
IMAGE
REJECT
MIXER
x2
LO
DOUBLER BUFFER
IF1
Out
LO(+15dBm)
20.5-22.5 GHz
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
IF2
In
G=17dB
Printed
BPF
IR Mixer
IR~22dB
Det
Out
XP1005
Ref
Out
LO(+15dBm)
20.5-22.5 GHz
XU1004
LO In
1/2 Frequency
RF
x2
LO
DOUBLER BUFFER
RF
BUFFER
BALANCED
MIXER
RF
Out
POWER AMPLIFIER
IF1
In
XR1004
IF2
Out
DIPLEXER
LNA
LO In
1/2 Frequency
IMAGE
REJECT
MIXER
x2
RF
In
LO
DOUBLER BUFFER
IF1
Out
GaAs Semiconductors
RF
In
ABOUT US
F IN
6.5 GHz
to -80dBm
Mimix Broadband, Inc. designs, develops and supplies
high performance gallium arsenide (GaAs) semiconductors from DC to 50 GHz for microwave and
XR1002
millimeter-wave wireless communications applications NF~3.0dB
as bare die or in surface mount packages. Our team of
Printed
world-classIR
technologists
has focused on BPF
the
Mixer
IR~22dB
G=17dB
development of state-of-the-art semiconductors for
several decades.We leverage strategic partnerships for
manufacturing, in order to expedite the time-to-market
cycle and meet market requirements. Due in part to
our acquisition of Celeritek, we offer a highly
diversified product line that serves the top tier
telecom, satellite and defense companies.
LO(+15dBm)
20.5-22.5
Mimix leverages our
designGHz
capabilities in
complete communications systems with semiconductor device expertise to deliver innovative
solutions for the most challenging applications.
XR1002
NF~3.0dB
IR Mixer
IR~18dB
G=14dB
Ka-band and
Ku-band
packaged
amplifiers and
handset RF modules for satellite communications.We
have also developed power amplifiers for the emerging
WiMAX market.
Atten=0-12dB
Our Value Proposition - Mimix has many
LO(+15dBm)
unique and distinct qualities, which differentiate our23.5-25.5 GHz
company. Most importantly, we combine our
background in systems design with semiconductor
device expertise to deliver industry-leading, high
power and highly integrated GaAs semiconductors
from DC to 50 GHz.
Using this expertise, Mimix provides revolutionary
solutions to meet the market’s requirements with our
innovative GaAs IC technology. Our semiconductor
RF IN
Our Expanded GaAs Solutions
devices offer greater power over a broader frequency
XR1002
24.5-26.5 GHz
NF~3.0dB
In 2005 Mimix acquired Celeritek, a supplier
of
range, place more functionality on a single chip,
and to -80dBm
-20dBm
monolithic microwave integrated circuits (MMICs),
achieve best in classPrinted
low noise performance.We
IR Mixer
BPF
RFgain
IN blocks and power
FETs, low noise amplifiers,
provide
complete
semiconductor
solutions, such as
IR~22dB
G=17dB
24.5-26.5 GHz
amplifier modules for
the to
semiconductor
components
entire power amplifier modules, 3-Chip Transceiver
-20dBm
-80dBm
market using GaAs based device technology.This
Solutions and low cost packaging. Our MMIC chipset
acquisition significantly enhanced our product breadth
solutions significantly reduce the cost of semiand depth and increased our technical capabilities in
conductors and even more dramatically lower the
designing and packaging semiconductors.The
variability and cost of manufacturing these high
combination of these two companies doubled our size
frequency transceivers.
LO(+15dBm)
and capability, making Mimix a leading GaAs supplier in
20.5-22.5 GHz
the microwave and millimeter-wave industries.
We also supply reliable and cost effective packaged
solutions that meet the demands of today’s bandwidthXR1002
Using
a
customer-intimate
model
of
product
and
hungry network. Mimix packaged solutions deliver
NF~3.0dB
technology development, Mimix not only markets
what it takes to meet the challenge of cost effective
standard catalog products, but also designs custom
integration from concept to market.
IR Mixer
devices
that
achieve
our
customers’
specifications.
IR~18dB
G=14dB
Value-addedXR1002
Services - Our ISO 9001registered facilitiesNF~3.0dB
have state-of-the-art laboratories to
Products for a Variety of
Printed
extensively test our GaAs ICs IR
toMixer
our customers’
Applications - Mimix offers a variety of
BPF
RF IN
IR~22dB
G=17dB
24.5-26.5 GHzfor guaranteed performance of our
products for telecommunications, satellite and defense
specifications
-20dBm to -80dBm
applications. Our broad product offering includes: 3products. Our test capability covers from DC to 50
Chip Solutions for digital microwave radio; best in class
GHz and includes automated and semi-automated
amplifiers for cellular base stations; broadband MMICs,
testing and handling of MMIC, module and subAtten=0-12dB
FETs and gain blocks for military applications; and
assembly products.
LO(+15dBm)
LO(+15dBm)
23.5-25.5 GHz
20.5-22.5 GHz
XR1002
NF~3.0dB
G=17d
RF IN
.5-26.5 GHz
Bm to -80dBm
TABLE
OF
CONTENTS
About Us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0
About this Catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Product Applications Features & Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Infrastructure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XR1002
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
NF~3.0dB
Point-to-Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Printed
. . . .5
IR Mixer
RF IN
BPF
IF Out
4 GHz
Satellite Communcations (SatCom) 27.5-29.5
. . . . . . GHz
. . . . . . . . . G=14dB
. . . . . . . . . . . . . IR~18dB
. . . . . . . . . . . . . . . . . . . . . . .7
-20dBm to -80dBm
Military, Defense & Space (Defense) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AGC Control
Dynamic Range=60 dB
Buffer Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Atten=0-12dB
Distributed Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LO(+15dBm)
. . . . . . . . . . . . . . . .13
23.5-25.5 GHz
Gain Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Low Noise Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Low Noise GaAs FETs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
XR1002
NF~3.0dB
Mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Multipliers / Oscillators
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Printed
G=17dB
IR Mixer
IR~22dB
Power
BPF
IF Out
Amplifiers . . . . . . . . . . . . . . . . .4.GHz
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Power GaAs FETs / Prescalers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Receivers / Switches . . . . . . .AGC
. . . Control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Dynamic Range=60 dB
Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
RoHS Program
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
LO(+15dBm)
20.5-22.5 GHz
Packaging Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Handling & Assembly Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Det
Ref
Evaluation Modules . . . . . . . . . . . . . . . . . . . IF2
. . . . . . . . . . . . . . . . . . . .XP1005
. . . . . . . . . . . . . . . . . .Out. . Out
. . .30
In
XU1004
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RF. . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
LO In
1/2 Frequency
x2
Sales Representatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
LO
DOUBLER BUFFER
RF
BUFFER
BALANCED
MIXER
RF
Distributor / Company Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Out
POWER AMPLIFIER
Our Markets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
IF1
IF2
Our Commitment to Quality and Customer
. . . . . . . . . . . . . . . . . . . . . . .37
In Support . . . . . . . . . . Out
DIPLEXER
XR1004
LNA
LO In
1/2 Frequency
IMAGE
REJECT
MIXER
x2
LO
DOUBLER BUFFER
IF1
Out
RF
In
ABOUT
THIS
C ATA L O G
To help you select and design with Mimix Broadband’s GaAs semiconductors, this catalog contains detailed product specifications.
The catalog is divided into sections:
About Us
About this Catalog
XR1002
NF~3.0dB
Product
Applications Features & Index
Products
IR Mixer
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
Printed
BPF
IF Out
4 GHz
IR~18dB
G=14dB
RoHs Program
Packaging Outlines
Handling & Assembly Information
XR1002
NF~3.0dB
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
AGC Control
Evaluation Modules
Dynamic Range=60 dB
Ordering Atten=0-12dB
Information
LO(+15dBm)
Sales Representatives
Part
23.5-25.5 GHz
Frequency
Gain
Part Type
Number
Distributor / Company Contact Information
Our Markets
IR Mixer
IR~18dB
G=14dB
Atten=0-12dB
Our Commitment to Quality and Customer Support
Complete datasheets, application notes,Terms and Conditions of Sales, and more can be found on our website:
www.mimixbroadband.com.
P1005
Out
ut
Reff
Out
O
Our Product Categories
As we strive to provide extensive applications engineering support and customer service, the product development categories for
our devices should help design engineers understand our nomenclature.
WEER
R AMPLIFIER
Production Devices: Devices produced in high volume with extensive test results. Samples are available by request. Devices
DIPLEXER
X
are usually available for delivery from stock - 2 weeks after receipt of order (ARO). If not available from stock, additional devices
can be available 6-8 weeks ARO.
LO
O In
1/2 Frequencyy
Pre-production Devices: These devices have been characterized
from prototype wafers and the specifications may be
preliminary. Samples are generally available in small quantities by request. Production quantities can be available within 8-12 weeks,
and a minimum order may apply.
XR1002
NF~3.0dB
Mimix is continuously designing new parts for improved performance and lower cost. From time to time, parts may be upgraded to a new part
that is pin-for-pin compatible. Adequate notice and samples will be supplied to existing customers.
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
2
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
G=17dB
r
B
P R O D U C T F E AT U R E S - I N F R A S T R U C T U R E
Leveraging our component and integration experience allows Mimix to provide low cost GaAs semiconductor products to
equipment designers that can also significantly reduce board space. Our infrastructure offerings include: gain blocks, linear PAs,
LNAs and drivers. Each component covers a wide range of frequencies making them ideal for current or next generation:
2.5 or 3G Base Stations
WiMAX
Wireless Routers
Wireless Local Loop (WLL)
ISM
Broadband Wireless Access
Telemetry
CATV
More!
New Product Feature: CMM6027-SC
Printed
The CMM6027-SC
is a high dynamic range amplifier designed for applications operating within the
BPF
IF Out
50 MHz to 4 GHz range.4 GHz
+46 dBm Output lP3
+27 dBm P1dB
2.8 dB Noise Figure
Single Positive Power Supply, 3V ~ 5V
Control
15 dB Dynamic
GainAGC
@Range=60
2 GHz dB
MTTF > 100 Years
New Product Feature: CHV2707-QJ
LO(+15dBm)
23.5-25.5 GHz
The CHV2707-QJ is an internally pre-matched power HBT designed for applications operating from
700 to 800 MHz.
Single Supply Operation, 12V
Current Control for Multiple Applications
2.5% EVM @ 30 dBm Avg. Power, 802.16 OFDM
On-Chip ESD Protection
Low Thermal Resistance
RoHS Compliant 6x6 mm QFN Package
Additional Product Highlights:
Description
Part Number
Power
Amplifier
CHV2707-QJ
Power
Amplifier
CHV2710-QJ
Low Noise
GaAs FET
CFS0303-SB
Low Noise
GaAs FET
CDQ0303-QS
LO In
1/2 Frequency
0.7-0.8
x2
14.0
LO
DOUBLER BUFFER
Printed
BPFCGB7014-SC IF Out
4 GHz
Gain Block
CMM6003-SC
Gain Block
AGC Control
CMM6027-SC
Gain Block
Dynamic Range=60 dB
Gain Block
LO(+15dBm)
20.5-22.5 GHz
CDQ6004-QS
(dual channel**)
IF2
OIP3XP1005 Bias
(dBm)
(mA @ V)
Ref
Out
Output P1dB
(dBm)
+/- 0.5
+37.0
+51.0*
730 @ 12.0
7
-QJ
(6x6 mm)
+37.0
+51.0
730 @ 12.0
7
-QJ RF
(6x6 mm)Out
60 @ 3.0
98
-SB
(SOT-343)
+32.0Out
(+35.0**)
50 @ 3.0
98
-QS
(4x4 mm)
+40.5IMAGE
115 @ 5.3
35
In
-SC
(SOT-89)
78 @ 4.75
80
-SC
(SOT-89)
BALANCED
MIXER
2.3-2.5
2.5-2.7
10.0
9.0
+/- 0.5
DC-10.0
22.4
NF = 0.2
RF
BUFFER
RF
Rth
Deg/W
Det
Out
Gain Flatness
In
(dB)
POWER AMPLIFIER
IF1
In
CGB7389-SC
Gain Block
IR Mixer
IR~22dB
Frequency
Gain
(GHz) XU1004 (dB)
DC-10.0
23.5
NF = 0.5
DC-2.7
13.0
-
+17.0
+32.0
IF2
+17.0
XR1004
(+20.0**)
+23.5
LO In
1/2 Frequency
x2
DOUBLER BUFFER
+20.3
+36.0
REJECT
MIXER
Package
DIPLEXER
LNA
RF
LO
DC-8.0
24.5
+/- 3.0
0.05-0.9
17.0
NF = 1.6
+22.0
+41.0
150 @ 5.0
59
-SC
(SOT-89)
0.05-3.0
14.5
NF = 2.8
+27.0
+46.0
400 @ 5.0
65
-QS
(4x4 mm)
0.05-4.0
16.5
NF = 2.1
+23.0
(+26.0**)
+41.0
(+44.0**)
150 @ 5.0
52
-QS
(4x4 mm)
IF1
Out
*EVM = 2.5% @ 1W
**balanced configuration
For the complete list of Mimix Infrastructure Products see page 4.
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
3
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
PRODUCT INDEX - INFRASTRUCTURE
Buffer Amplifiers
CGB7008-SP
CMM0511-QT
CMM1200-BD
CGB7009-BD
CGB7009-SC
CGB7010-BD
CMM-2-BD
XR1002
CMM2000-QT
NF~3.0dB
CMM-5-BD
RF IN
G=14dB
CMM-9-BD
27.5-29.5
GHz
-20dBm to -80dBm
CMM9000-QT
IR Mixer
IR~18dB
XB1007-BD
XB1007-QT
Atten=0-12dB
CGB7010-SC
CGB7010-SP
Printed
CGB7011-BD
BPF
CGB7011-SC
CGB7011-SP
CGB7012-BD
CGB7012-SC
CGB7014-BD
Distributed
AmplifiersPart Type
CGB7014-SC
CMM0016-BD
CMM2030-BD
CMM3020-BD
CMM3030-BD
CGB7017-BD
CGB7017-SC
CGB7289-BD
XD1005-BD
XD1005-QT
Gain Blocks
CDQ6004-QS
CGB7001-BD
CGB7001-SC
CGB7001-SP
CGB7003-BD
CGB7003-SC
CGB7003-SP
CGB7004-BD
CGB7004-SC
CGB7005-BD
CGB7005-SC
CGB7005-SP
CGB7006-BD
CGB7289-SC
CGB7389-SC
CMM2306-AJ
CMM2308-AJ
CMM6001-BD
CMM6001-SC
CMM6003-SC
CMM6004-AH
CMM6004-BD
CMM6004-SC
CMM6027-SC
Low Noise
Amplifiers
CMM1100-BD
CMM1100-QF
CMM1110-BD
CMM4000-BD
XL1007-QT
XL1010-BD
XL1010-QT
IF Out
4 GHz
CF003-03
CF004-01
CF004-03
AGC Control
Dynamic Range=60 dB
Frequency
Number
CGB7015-BD
CGB7015-SC
CGB7016-BD
CGB7016-SC
CF001-01
CF001-03
CF003-01
CF007-01
LO(+15dBm)
Part
23.5-25.5 GHz
CMM0014-BD
CMM0015-BD
XD1001-BD
XD1002-BD
XD1004-BD
XD1004-QT
Low Noise GaAs
FETs, Die
Low Noise GaAs
FETs, Packaged
Gain
CDQ0303-QS
CFA0101-A
CFA0103-A
CFB0101-B
CFB0103-B
CFB0301-B
CFB0303-B
CFC0301-C
CFK0301-AK
CFP0103-SP
CFP0303-SP
CFS0103-SB
CFS0303-SB
Multipliers
LO
O In
1/2 Frequencyy
XX1000-BD
XX1000-QT
XX1001-BD
XX1001-QK
XX1002-BD
XX1002-QH
XX1004-BD
XX1005-BD
Power Amplifiers
CHV2707-QJ
CHV2710-QJ
CMM0014-BD
CMM0015-BD
CMM0016-BD
XR1002
CMM0618-BDNF~3.0dB
CMM2321-AK
RF IN
CMM3566-LC
27.5-29.5 GHz
XX1001-QK
-20dBm
to -80dBm
IR Mixer
IR~18dB
G=14dB
Power GaAs FETs,
Die
CF003-01-BD
CF005-01-BD
Atten=0-12dB
CF010-01-BD
CF015-11-BD
Out
ut
P1005
Reff
Out
O
Power GaAs FETs,
Packaged
CFH2162-P1
WEER
R AMPLIFIER
CFH2162-P3
CFH2162-P5
CFK2062-P1
CFK2062-P3
CFK2062-P5
DIPLEXER
X
CFK2162-P1
CFK2162-P3
CFK2162-P5
Switches
CSW0118-BD
XX1007-BD
XX1007-QT
CGB7006-SC
CGB7007-BD
CGB7007-SC
CGB7008-BD
CGB7008-SC
4
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
XR1002
NF~3.0dB
G=17dB
P R O D U C T F E AT U R E S - P O I N T- TO - P O I N T
New wireless mobile services and the evolution of interactive media services are driving demand for higher bandwidths and data
rates in backhaul telecommunications systems, along with lower costs. MMIC chipsets for providers of point-to-point and point-tomultipoint systems form a large part of the cost. Mimix combines our semiconductor device expertise and communications systems
background to offer our innovative packaged chipset solutions that lower material and assembly costs and increase reliability and
manufacturability of products.
New Product Feature:
5.6-8.5 GHz Packaged Transceiver Solution
Lowers
PrintedCost & Variability of Transceivers
BPF
Out
Uses Fewer Parts & IF
Footprint Area
4Smaller
GHz
r
B
QFN Packaging Technology
Integrates Many Functions into Single MMIC
Increases Performance
& Functionality
AGC Control
Dynamic Range=60 dB
LO(+15dBm)
23.5-25.5 GHz
38 GHz SMT Chipset
IR Mixer
IR~22dB
12.5-15.5 GHz Amplifiers
5.6-8.5 GHz QFN Chipset
Additional Product Highlights:
Description
Part Number
Buffer Amplifier
(QFN)
XB1007-QT
Power Amplifier
(QFN)
XP1035-QH
Receiver
(QFN)
XR1011-QH
Doubler
(QFN)
XX1002-QH
Up-Converter
(QFN)
XU1012-QH
Buffer Amplifier
(QFN)
XB1008-QT
Frequency
(GHz)
Gain
(dB)
Gain
Flatness
(dB)
Noise
Figure
(dB)
Output
P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
4.0-11.0
23.0
+/- 1.5
4.5
+20.0
+30.0
100 @ 4.0
-QT
(3x3 mm)
5.8-8.5
25.0
+/- 1.0
-
+29.0
+39.0
500 @ 7.0
-QH
(4x4 mm)
5.0-10.0
LO In
2.5-6.0
(fin)
1/2 Frequency
5.0-12.0 (fout)
5.0-10.0
14.0
XU1004
+/- 1.0
IF2
In
Det
Out
XP1005
1.7
+16.0
130 @ 4.0
+16.0
-
125 @ 5.0
-QH
(4x4 mm)
+7.0
+17.0
120 @ 4.0
RF
-QH Out
(4x4 mm)
+16.0
x2
16.0
+/- 1.5
LO
DOUBLER BUFFER
-8.0
-
RF
BUFFER
BALANCED
MIXER
+/- 1.0
-
POWER AMPLIFIER
10.0-21.0
XP1033-QT
12.5-15.5
18.0
+/- 2.0 IF1
5.5
17.0
+/- 1.0
+20.0
Power Amplifier
(Doubler/SMT)
XX1001-QK
Power Amplifier
(SMT)
XP1031-QK
Receiver
(SMT)
XR1008-QB
LO(+15dBm)
20.5-22.5
GHz
Doubler
+25.0
+34.0
DIPLEXER
500 @ 7.0
XX1000-QT
Transmitter
(LO Buffer/SMT)
XU1006-QB
IMAGE
REJECT
MIXER
x2
RF
In
-QT
(3x3 mm)
+30.0
+40.0
700 @ 7.0
-QH
(4x4 mm)
-
+25.0
(Psat)
IF1
Out
530 @ 4.5
-QK
(7x7 mm)
+/- 2.5
-
+25.0
+35.0
600 @ 5.0
-QK
(7x7 mm)
9.0
+/- 1.5
3.5
+5.0
+15.0
200 @ 4.0
-QB
(7x7 mm)
7.5-22.5 (fin)
15.0-45.0 (fout)
10.0
+/- 2.0
-
+18.0
(Psat)
-
200 @ 5.0 /
25 @ -2.0
-QT
(3x3 mm)
36.0-42.0
3.0
+/- 1.0
-
+12.0
+20.0
230 @ 4.0
-QB
(7x7 mm)
12.5-15.5
IF Out
4 GHz
19.0
+/- 1.0
-
25.0
+/- 0.5
23.0
35.0-45.0
18.0-21.0 (fin)
36.0-42.0 (fout)
AGC Control 37.0-42.0
Dynamic Range=60 dB
(QFN)
LO In
1/2 Frequency
-QT
(3x3 mm)
100 @ 4.0
IF2
Out
XR1004
-
+30.0
LNA
XP1034-QH
Power AmpliferPrinted
BPF
(QFN)
Ref
Out
-QH
(4x4 mm)
RF
In
Driver Amplifier
(QFN)
Package
LO
DOUBLER BUFFER
For the complete list of Mimix Point-to-Point Products see page 6.
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
5
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
P R O D U C T I N D E X - P O I N T- TO - P O I N T
Buffer
Amplifiers
CMM0511-QT
CMM1118-QT
XR1002
NF~3.0dB
CMM2000-QT
CMM4000-BD
G=14dB
CMM9000-QT
XB1002-BD
Distributed
Amplifiers
CMM4000-BD
XD1001-BD
XD1002-BD
XD1004-BD
XD1004-QT
XD1005-BD
XD1005-QT
Gain Blocks
CDQ6004-QS
CGB7001-BD
CGB7001-SC
CGB7001-SP
CGB7003-BD
CGB7003-SC
CGB7003-SP
CGB7004-BD
CGB7004-SC
CGB7005-BD
CGB7005-SC
CGB7005-SP
CGB7006-BD
CGB7006-SC
CGB7007-BD
CGB7007-SC
CGB7008-SP
CGB7009-BD
CGB7009-SC
XL1010-BD
XL1010-QT
XQ1000-BD
XQ1001-BD
XQ1002-BD
Low Noise
GaAsIF Out
FETs,
4 GHz
Die
XQ1003-BD
XQ1004-BD
XQ1005-BD
CGB7010-SP
CGB7011-BD
CGB7011-SC
Part Type
XB1009-QT
Oscillators
IR~18dB
Atten=0-12dB
XB1008-BD
XB1008-QT
XB1009-BD
XL1004-BD
XL1005-BD
CGB7010-BD
CGB7010-SC
IR
Mixer
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
XB1004-BD
XB1005-BD
XB1006-BD
XB1007-BD
XB1007-QT
CGB7008-BD
CGB7008-SC
CGB7011-SP
CGB7012-BD
LO(+15dBm)
Part
CGB7012-SC
23.5-25.5 GHz
Number
CGB7014-BD
CGB7014-SC
CGB7015-BD
CGB7015-SC
CGB7016-BD
CGB7016-SC
CGB7017-BD
CGB7017-SC
CGB7289-BD
CGB7289-SC
CGB7389-SC
CMM2306-AJ
CMM2308-AJ
CMM6001-BD
CMM6001-SC
CMM6003-SC
CMM6004-AH
CMM6004-BD
CMM6004-SC
CMM6027-SC
Low Noise
Amplifiers
CMM1100-BD
CMM1100-QF
CMM1110-BD
XB1004-BD
XB1005-BD
XL1000-BD
XL1001-BD
XL1002-BD
XL1003-BD
Printed
BPF
Prescalers &
Dividers
XE1001-BD
XE1001-QT
Receivers
XR1002
NF~3.0dB
XR1000-BD
RF INXR1001-BD
XQ1006-BD
CF001-01
AGC Control
CF001-03
Dynamic
Range=60 dB
CF003-01
CF003-03
Frequency
Gain
CF004-01
CF004-03
CF007-01
Mixers
Power
Amplifiers
XP1011-BD
XP1012-BD
XP1013-BD
XP1013-QD
XP1015-BD
XP1016-BD
XP1017-BD
XP1018-BD
XM1003-BD
XM1004-BD
XM1005-BD
XM1006-BD
XP1019-BD
XP1020-BD
XP1021-BD
XP1022-BD
XM1008-BD
XU1010-BD
XU1010-QH
XU1012-BD
XP1022-QF
XP1023-BD
XP1024-BD
XP1028-BD
LO
O In
1/2 Frequencyy
XU1012-QH
Multipliers
XX1000-BD
XX1000-QT
XX1001-BD
XX1001-QK
XX1002-BD
XX1002-QH
XX1004-BD
XX1005-BD
XX1007-BD
XX1007-QT
XR1002-QB
XR1004-BD
XR1005-BD
XR1005-QD
XP1003-BD
XP1005-BD
XM1000-BD
XM1001-BD
XM1001-QH
XM1002-BD
XR1006-BD
XR1006-QD
XR1007-BD
P1005
XP1031-BD
XP1031-QK
XP1033-QT
XP1034-QH
XP1035-QH
XX1001-BD
XX1001-QK
Power GaAs
FETs, Die
CF003-01-BD
CF005-01-BD
CF010-01-BD
IR Mixer
IR~18dB
G=14dB
27.5-29.5 GHz
XR1002-BD
-20dBm to -80dBm
XR1007-QD
XR1008-QB
XR1009-BD
XR1011-BD
Atten=0-12dB
Out
ut
Reff
Out
O
XR1011-QH
WEER
R AMPLIFIER
Transmitters
XU1000-BD
XU1001-BD
DIPLEXER
X
XU1002-BD
XU1002-QD
XU1003-BD
XU1003-QD
XU1004-BD
XU1005-BD
XU1005-QD
RF IN
XU1006-BD
24.5-26.5 GHz
-20dBm to -80dBm
XU1006-QB
XU1007-BD
XU1009-BD
XU1010-BD
XU1010-QH
XU1012-BD
XU1012-QH
CF015-11-BD
6
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
XR1002
NF~3.0dB
G=17dB
r
B
P R O D U C T F E AT U R E S - S AT C O M
In the past several years, a number of companies have developed satellite-based commercial communications systems that provide
voice and data services across large geographic areas.While some services have provided global communications for many years, the
required equipment has traditionally been bulky and expensive, limiting their applications to high-priority use. A new breed of
satellite communications systems promises to bring receiver equipment, services and costs into the same realm as today’s groundbased service providers.The high power and low noise requirements of satellite communications applications are well served by our
industry-leading product offerings.
New Product Feature for Ku-Band: XX1007-BD/QT
Mimix Printed
Broadband’s 13.5-17.0 / 27.0-34.0 GHz GaAs MMIC doubler integrates a gain stage,
BPF
IF Out
passive doubler
and driver
amplifier onto a single device.
4 GHz
Integrated Gain, Doubler and Driver Stages
Self-Biased Architecture
AGC Control
+21.0 dBm
Output
Saturated
Power
Dynamic
Range=60
dB
40.0 dBc Fundamental Suppression
LO(+15dBm)
23.5-25.5 GHz
On-Chip ESD Protection
100% On-Wafer RF, DC and Output Power Testing
100% Visual Inspection to MIL-STD-883 Method 2010
Additional Ku-Band & Ka-Band Product Highlights:
Description
Power Amplifier
Power Amplifier
(QFN)
Power Amplifier
Power Amplifier
(Balanced)
Power Amplifier
Part Number
CMM1434-SM
CMQ1432-QH
XP1026-BD
XP1027-BD
XP1025-BD
Low Noise
Amplifier (QFN)
XL1007-QT
BufferAmplifier
(Single Supply/QFN)
CMM0511-QT
Gain
(dB)
Gain Flatness
(dB)
Output P1dB
(dBm)
Bias
(mA @ V)
13.5-14.5
31.0
+/- 1.5
+34.5
(Psat)
1.5 A @ 6.0
13.5-15.5
32.0
LO In
27.0-32.0
1/2 Frequency
XU1004
IF2
In +/-
+32.0
(Psat)
XP1005
Out
Multiplier
(Doubler)
XX1007-BD
22.0
+33.0
(Psat)
1.0 A @ 6.0
DIE
+/- 1.0
+36.0
(Psat)
2.1 A @ 6.0
DIE
+30.0
(Psat)
420 @ 5.0
+/- 1.0
RF
BUFFER
BALANCED
MIXER
21.0
28.0-31.0
27.0
+/- 1.0
3.5-8.0
12.0
IF1
In+/- 2.0
5.0-14.0
20.0
+/- 1.1
Multiplier
(Doubler/QFN)
XX1007-QT
27.0-34.0 (fout)
13.5-17.0 (fin)
27.0-34.0 (fout)
Out
-QH
(4x4 mm)
27.0-33.0
IF Out
4 GHz
13.5-17.0
(fin)
-SM
(6x6
Det mm)
Ref
RF
x2
LO
DOUBLER BUFFER
11.0-20.0
Package
770 @ 7.0
2.0
XR1004
+10.0
20.0
LO In
+/- 2.0
1/2 Frequency
IF2
Out
+11.0
x2
+14.0
90 @ 6.0
IMAGE
REJECT
MIXER
+/- 1.0
+21.0
(Psat)
16.0
+/- 1.0
+21.0
(Psat)
IF1
Out
DIE
-QT DIPLEXER
(3x3 mm)
33 @ 3.0
RF
In
-QT
(3x3 mm)
90 @ 5.0
-QT
(3x3 mm)
200 @ 5.0
DIE
200 @ 5.0
-QT
(3x3 mm)
LO
DOUBLER BUFFER
16.0
RF
Out
POWER AMPLIFIER
LNA
CMM1118-QT
Buffer Amplifier Printed
IR Mixer (Single Supply/QFN) BPF
IR~22dB
Frequency
(GHz)
AGC Control
Dynamic Range=60 dB
LO(+15dBm)
20.5-22.5 GHz
For the complete list of Mimix SatCom Products see page 8.
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
7
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
P R O D U C T I N D E X - S AT C O M
Buffer Amplifiers
CGB7017-SC
Power Amplifiers
CMM0511-QT
CMM1118-QT
CMM2000-QT
XR1002
CGB7289-BD
CGB7289-SC
CGB7389-SC
CMM2306-AJ
CMM1631-SM
CMQ1332-QH
CMQ1432-QH
NF~3.0dB
CMM9000-QT
XB1008-BD
RF IN
G=14dB
27.5-29.5
GHz
XB1008-QT
-20dBm to -80dBm
CMM2308-AJ
Printed
CMM6001-BD
BPF
CMM6001-SC
CMM6003-SC
IR Mixer
IR~18dB
Gain Blocks
CDQ6004-QS
Atten=0-12dB
CGB7001-BD
Part Type
CGB7001-SC
CGB7001-SP
CGB7003-BD
CGB7003-SC
CGB7003-SP
CGB7004-BD
CGB7004-SC
CGB7005-BD
CGB7005-SC
CGB7005-SP
CGB7006-BD
CGB7006-SC
CGB7007-BD
CGB7007-SC
CGB7008-BD
CGB7008-SC
CGB7008-SP
CGB7009-BD
CGB7009-SC
CGB7010-BD
CGB7010-SC
CGB7010-SP
CGB7011-BD
CGB7011-SC
CGB7011-SP
CGB7012-BD
CGB7012-SC
CGB7014-BD
CGB7014-SC
CGB7015-BD
CGB7015-SC
CGB7016-BD
CGB7016-SC
LO(+15dBm)
Part
23.5-25.5 GHz
Number
CMM1434-SM
CMQ1631-QH
XP1020-BD
IF Out
4 GHz
CMM6004-AH
AGC Control
Dynamic Range=60 dB
CMM6004-BD
CMM6004-SC
CMM6027-SC
Frequency
Gain
XR1002
NF~3.0dB
XP1023-BD
RF IN
XP1025-BD
27.5-29.5 GHz
-20dBm to -80dBm
XP1026-BD
XP1027-BD
XP1032-BD
IR Mixer
IR~18dB
G=14dB
XX1001-QK
Low Noise Amplifiers
Atten=0-12dB
Power GaAs FETs, Die
CMM1100-BD
CMM1100-QF
CF003-01-BD
CF005-01-BD
P1005
CF010-01-BD
CF015-11-BD
CMM1110-BD
CMM4000-BD
XL1010-BD
XL1010-QT
Out
ut
Reff
Out
O
Transmitters
Low Noise GaAs FETs,
Die
WEER
R AMPLIFIER
XU1005-BD
XU1005-QD
DIPLEXER
X
CF001-01
CF001-03
CF003-01
CF003-03
CF004-01
CF004-03
CF007-01
LO
O In
1/2 Frequencyy
Multipliers
XX1000-BD
XX1000-QT
XX1001-BD
XX1001-QK
XX1002-BD
XX1002-QH
XX1004-BD
XX1005-BD
XX1007-BD
XX1007-QT
CGB7017-BD
8
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
G=17dB
P R O D U C T F E AT U R E S - D E F E N S E
Mimix’s acquisition of Celeritek in June 2005 allowed us to apply twenty years of product development history to serve the
defense and space markets.This is a diverse marketplace, encompassing applications from satellite and signal intelligence to
defense systems and aircraft platforms. Mimix has long been a leading supplier of power amplifier MMICs and modules with a
tradition of advanced technology and superior quality. Within the next ten years, defense electronics products must satisfy a
number of requirements, not the least of which will be high performance at a practical cost.Today, we are able to leverage our
volume commercial products and technologies to offer our customers the best overall value in microwave and millimeter-wave
ICs, space-qualified devices, and amplifier-based modules.
New Product Feature: CMM0015-BD
Printed
Ultra-Wideband
Power Amplifier
BPF
IF Out
4 GHzArchitecture
Compact Size / Self-Bias
Positive Gain Slope
r
B
11.0 dB Small Signal Gain
+28.0 dBm P1dB Compression Point
+38.0 dBm Third Order Intercept
AGC Control
New Product
Feature: CMM1100-QF
Dynamic Range=60 dB
LO(+15dBm)
23.5-25.5 GHz
4x4 mm Package
Self-Bias Architecture
16.0 dB Small Signal Gain
4.0 dB Noise Figure
+15.0 dBm P1dB Compression Point
Additional Defense Product Highlights:
Description
Part Number
CMM0618-BD
Power Amplifier
XP1015-BD
Power Amplifier
(Balanced)
Frequency
(GHz)
Gain
(dB)
Gain Flatness Noise Figure Output P1dB
(dB)
(dB)
(dBm)
6.0-18.0
10.5
+/- 1.5
43.5-46.5
13.0
-
+29.0
+/- 1.0
In
-
+31.0
+/- 1.0
-
IF2
OIP3
(dBm)
Bias
(mA @ V)
+36.0
750 @ 6.0
XP1005-
2.8 A @ 5.0
+24.0
-
720 @ 5.0
100 @ 5.0
Package
DIE
Det
Out
Ref
Out
DIE
XU1004
XP1016-BD
Power Amplifier
Low Noise Amplifier
(Single Supply/SMT)
CMM1100-QF
Low Noise Amplifier
(QFN)
XL1010-QT
Low Noise Amplifier
(Balanced/Single Supply)
XL1003-BD
Low Noise Amplifier
(Balanced/Single Supply)
XL1004-BD
Distributed Amplifier
Printed
IR Mixer
IR~22dB
BPF
Distributed Amplifier
CMM3020-BD
IF Out
CMM4000-BD
4 GHz
AGC Control
CMM0015-BD
Distributed Amplifier Dynamic Range=60 dB
Distributed Amplifier
LO(+15dBm)
20.5-22.5 GHz
2.0-18.0
x2
14.0
LO
DOUBLER BUFFER
RF
RF
BUFFER
16.0
+/-BALANCED
1.0
MIXER
4.0
+15.0
+25.0
20.0-38.0
17.0
+/- 2.0
3.0
-
-
24.0-40.0
24.0
IF1
+/- 3.5
1.7
+11.0
DIE
-QF
(4x4 mm) RF
Out
CMM0014-BD
Distributed /
Power Amplifier
43.5-46.5
LO In
1/2 Frequency
CMM0016-BD
Buffer Amplifier
(Single Supply/QFN)
CMM2000-QT
Buffer Amplifier
(Single Supply/QFN)
CMM9000-QT
POWER AMPLIFIER
35.0-45.0
17.0
In
+/- 2.0
XR1004
2.0
+6.0
45 @ 4.0
IF2 +19.0
Out
+14.0
65 @ 5.0
DIEDIPLEXER
85 @ 4.0
DIE
RF
In
LNA
.0003-20.0
10.0
LO In
+/- 0.5
1/2 Frequency
x2
6.5
+23.0
IMAGE
REJECT
MIXER
-QT
(3x3 mm)
+30.0
250 @ 8.0
DIE
+29.0
115 @ 5.0
DIE
LO
DOUBLER BUFFER
2.0-18.0
9.0
+/- 0.5
4.5
+19.0
IF1
Out
2.0-22.0
11.5
+/- 0.5
7.0
+24.0
+35.0
300 @ 8.0
DIE
2.0-22.0
11.0
+/- 1.5
7.5
+28.0
+38.0
350 @ 12.0
DIE
2.0-22.0
10.0
+/- 1.0
7.5
+30.0
+41.0
690 @ 12.0
DIE
1.5-6.0
13.0
13.0
+/- 1.0
+/- 1.0
6.0
5.5
+14.0
+12.0
+24.0
+24.0
35 @ 8.0
35 @ 5.0
-QT
(3x3 mm)
1.5-6.0
15.0
15.0
+/- 1.5
+/- 1.5
5.5
5.5
+15.0
+14.0
+25.0
+24.0
60 @ 6.0
60 @ 5.0
-QT
(3x3 mm)
For the complete list of Mimix Defense Products see page 10.
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
9
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
PRODUCT INDEX - DEFENSE
Buffer Amplifiers
CGB7006-SC
CMM0511-QT
CGB7007-BD
CGB7007-SC
CMM1118-QT
XR1002
CMM-2-BD
NF~3.0dB
CMM2000-QT
Printed
BPF
CGB7009-BD
CGB7009-SC
CGB7010-BD
IR Mixer
IR~18dB
G=14dB
CMM4000-BD
CMM-5-BD
CMM-9-BD
Atten=0-12dB
XB1006-BD
XB1008-BD
Part Type
LO(+15dBm)
Part
23.5-25.5 GHz
Number
XB1008-QT
Distributed Amplifiers
CMM0014-BD
CMM0015-BD
CMM0016-BD
CMM2030-BD
CMM3020-BD
CMM3030-BD
CMM4000-BD
XD1001-BD
XD1002-BD
XD1004-BD
XD1004-QT
XD1005-BD
XD1005-QT
Gain Blocks
CDQ6004-QS
CGB7001-BD
CGB7001-SC
CGB7001-SP
CGB7003-BD
CGB7003-SC
CGB7003-SP
CGB7004-BD
CGB7004-SC
CMM4000-BD
XB1005-BD
XL1000-BD
IF Out
4 GHz
CGB7010-SC
AGC Control
Dynamic Range=60 dB
CGB7010-SP
CMM9000-QT
XB1005-BD
CMM1100-BD
CMM1100-QF
CMM1110-BD
CGB7008-BD
CGB7008-SC
CGB7008-SP
CMM1200-BD
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
Low Noise Amplifiers
CGB7011-BD
CGB7011-SC
Frequency
CGB7011-SP
Gain
CGB7012-BD
CGB7012-SC
CGB7014-BD
CGB7014-SC
CMM6004-BD
CMM6004-SC
CMM6027-SC
XL1010-BD
XL1010-QT
IR Mixer
IR~18dB
G=14dB
Atten=0-12dB
Out
ut
P1005
CF001-01
CF001-03
CF003-01
CF003-03
CGB7017-BD
CGB7017-SC
CGB7289-BD
CMM6001-SC
CMM6003-SC
CMM6004-AH
XL1001-BD
XL1002-BD RF IN
27.5-29.5 GHz
XL1003-BD
-20dBm to -80dBm
XL1004-BD
XL1005-BD
Low Noise GaAs FETs,
Die
CGB7015-BD
CGB7015-SC
CGB7016-BD
CGB7016-SC
CGB7289-SC
CGB7389-SC
CMM2306-AJ
CMM2308-AJ
CMM6001-BD
XR1002
NF~3.0dB
CF004-01
CF004-03
CF007-01
Reff
Out
O
WEER
R AMPLIFIER
DIPLEXER
X
Low Noise GaAs FETs,
Packaged
LO
O In
1/2 Frequencyy
CDQ0303-QS
CFA0101-A
CFA0103-A
CFB0101-B
CFB0103-B
CFB0301-B
CFB0303-B
CFC0301-C
CFK0301-AK
CFP0103-SP
CFP0303-SP
CFS0103-SB
CFS0303-SB
CGB7005-BD
CGB7005-SC
CGB7005-SP
CGB7006-BD
10
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
G=17dB
PRODUCT INDEX - DEFENSE
r
B
Mixers
Power Amplifiers
Prescalers & Dividers
XM1001-BD
XM1001-QH
XM1004-BD
CMM0014-BD
CMM0015-BD
CMM0016-BD
XE1001-BD
XE1001-QT
XM1006-BD
XU1010-BD
XU1010-QH
CMM0618-BD
CMM1434-SM
CMM1631-SM
Receivers
XU1012-BD
Printed
BPF
XU1012-QH
XR1002-BD
XR1002-QB
CMQ1332-QH
CMQ1432-QH
CMQ1631-QH
XP1003-BD
XP1015-BD
IF Out
4 GHz
Multipliers
AGC Control
XX1000-BDDynamic Range=60 dB
XX1000-QT
XX1001-BD
LO(+15dBm)
XR1004-BD
XR1005-BD
XR1005-QD
XR1007-BD
XR1007-QD
XP1016-BD
XP1017-BD
XP1023-BD
23.5-25.5 GHz
XX1001-QK
XR1008-QB
XR1009-BD
XR1011-BD
XP1024-BD
XP1025-BD
XP1026-BD
XP1027-BD
XX1002-BD
XX1002-QH
XX1004-BD
XX1005-BD
XX1007-BD
XX1007-QT
XP1028-BD
XP1031-BD
XP1031-QK
XP1032-BD
Oscillators
XX1001-QK
XR1011-QH
Switches
CSW0118-BD
Transmitters
IF2
In
XU1004
LO In
1/2 Frequency
XQ1000-BD
XQ1001-BD
XQ1002-BD
XQ1003-BD
RF
x2
Power GaAs FETs, Die
LO
DOUBLER BUFFER
CF003-01-BD
CF005-01-BD
CF010-01-BD
CF015-11-BD
XQ1004-BD
XQ1005-BD
XQ1006-BD
XR1004
RF
Out
POWER AMPLIFIER
IF2
Out
DIPLEXER
LNA
Printed
BPF
IR Mixer
IR~22dB
LO In
1/2 Frequency
IF Out
4 GHz
Ref
Out
XU1009-BD
XU1010-BD
XU1010-QH
XU1012-BD
XU1012-QH
RF
BUFFER
BALANCED
MIXER
IF1
In
Det
Out
XP1005
IMAGE
REJECT
MIXER
x2
RF
In
LO
DOUBLER BUFFER
IF1
Out
AGC Control
Dynamic Range=60 dB
Space Qualified Products
LO(+15dBm)
20.5-22.5 GHz
Mimix Broadband offers GaAs MMICs qualified for high reliability applications.
To learn more about the standard process adopted by Mimix in qualifying a
GaAs MMIC product to Class K reliability level, please request the Space
Qualification Process application note from Product Management at
281.988.4600 or visit the website at www.mimixbroadband.com/spacequal.html.
11
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
BUFFER AMPLIFIERS
Our MMIC Product Matrix contains a snapshot view of our current product line. As Mimix strives to provide extensive applications
engineering support and customer service, the product development categories for our MMIC devices should help design engineers
understand our nomenclature.
Production Devices
I - Infrastructure
P - Point-to-Point
Pre-production Devices
S - SatCom
D - Defense
To obtain a complete datasheet of any product, please visit www.mimixbroadband.com or contact us via email at
info@mimixbroadband.com to request a copy. For more information call 281.988.4600.
Buffer Amplifiers
Description
Part Number
Frequency
(GHz)
Gain
(dB)
Gain
Flatness
(dB)
Noise
Figure
(dB)
Output P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
Package
Applications
CMM2000-QT
Buffer Amplifier
(Single Supply/QFN)
1.5-6.0
13.0
13.0
+/- 1.0
+/- 1.0
6.0
5.5
+14.0
+12.0
+24.0
+24.0
35 @ 8.0
35 @ 5.0
-QT
(3x3 mm)
I/S/P/D
CMM9000-QT
Buffer Amplifier
(Single Supply/QFN)
1.5-6.0
15.0
15.0
+/- 1.5
+/- 1.5
5.5
5.5
+15.0
+14.0
+25.0
+24.0
60 @ 6.0
60 @ 5.0
-QT
(3x3 mm)
I/S/P/D
2.0-6.0
16.5
+/- 1.0
5.5
+18.0
+28.0
100 @ 6.0
DIE
I/D
2.0-6.0
17.5
+/- 0.5
3.3
+15.5
+25.5
100 @ 5.0
DIE
I/D
2.0-9.0
13.0
+/- 1.5
5.5
+17.0
+27.0
80 @ 6.0
DIE
I/D
2.0-10.0
12.5
+/- 0.5
5.5
+10.0
+20.0
35 @ 8.0
DIE
I/D
2.0-18.0
8.0
+/- 0.5
4.5
+19.0
+29.0
115 @ 5.0
DIE
P/D
4.0-11.0
23.0
+/- 1.5
4.5
+20.0
+30.0
100 @ 4.0
DIE
I/P
4.0-11.0
23.0
+/- 1.5
4.5
+20.0
+30.0
100 @ 4.0
-QT
(3x3 mm)
I/P
5.0-14.0
20.0
+/- 1.1
-
+11.0
+22.0
90 @ 6.0
-QT
(3x3 mm)
I/S/P/D
10.0-21.0
18.0
+/- 2.0
5.5
+20.0
+30.0
100 @ 4.0
DIE
S/P/D
10.0-21.0
18.0
+/- 2.0
5.5
+20.0
+30.0
100 @ 4.0
-QT
(3x3 mm)
S/P/D
11.0-20.0
20.0
+/- 2.0
-
+14.0
+22.0
90 @ 5.0
-QT
(3x3 mm)
S/P/D
12.0-27.0
16.0
+/- 3.0
5.0
+22.0
+26.0
240 @ 5.0
-QT
(3x3 mm)
P
14.0-30.0
18.0
+/- 4.0
5.0
+22.0
+26.0
320 @ 5.0
DIE
P
16.0-30.0
20.0 /
21.0
+/- 1.0
2.2 / 3.2
+14.0 / +19.0 +24.0 / +29.0
90 @ 4.0 /
180 @ 6.0
DIE
P
18.0-38.0
21.0
+/- 2.0
3.2 / 4.5
+9.0 / +15.0
+19.0 / +25.0
50 @ 3.5 /
100 @ 5.5
DIE
P/D
35.0-45.0
19.0 /
23.0
+/- 1.0
2.7 / 3.7
+13.0 / +16.0 +23.0 / +26.0
50 @ 3.5 /
154 @ 4.5
DIE
P/D
36.0-43.0
24.0
+/- 2.5
4.0
+14.0 / +17.0 +24.0 / +27.0
110 @ 3.0 /
220 @ 5.5
DIE
P
Buffer Amplifier /
Gain Block
CMM-5-BD
Buffer Amplifier /
Low Noise /
Gain Block
CMM1200-BD
Buffer Amplifier /
Gain Block
CMM-9-BD
Buffer Amplifier /
Gain Block
CMM-2-BD
Buffer Amplifier
(Single Supply)
CMM4000-BD
Buffer Amplifier
Buffer Amplifier
(QFN)
XB1007-BD
XB1007-QT
CMM0511-QT
Buffer Amplifier
(Single Supply/QFN)
Buffer Amplifier
Buffer Amplifier
(QFN)
XB1008-BD
XB1008-QT
CMM1118-QT
Buffer Amplifier
(Single Supply/QFN)
Buffer Amplifier
(QFN)
Buffer Amplifier
XB1009-QT
XB1009-BD
Buffer Amplifier
(Low Noise/Power)
XB1004-BD
Buffer Amplifier
(Low Noise/Power)
XB1006-BD
Buffer Amplifier
(Low Noise/Power)
XB1005-BD
Buffer Amplifier
(Low Noise/Power)
XB1002-BD
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
12
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
D - Defense
DISTRIBUTED AMPLIFIERS
Distributed Amplifiers
Description
Part Number
Distributed
Amplifier
CMM3020-BD
Distributed
Amplifier
CMM2030-BD
Distributed
Amplifier
CMM3030-BD
Distributed
Amplifier
(Gain Control)
XD1002-BD
Distributed
Amplifier
CMM4000-BD
Distributed
Amplifier
CMM0014-BD
Distributed
Amplifier
CMM0015-BD
Distributed
Amplifier
CMM0016-BD
Distributed
Amplifier
XD1004-BD
Distributed
Amplifier
(QFN)
XD1004-QT
Distributed
Amplifier
XD1005-BD
Distributed
Amplifier
(QFN)
XD1005-QT
Distributed
Amplifier
(Gain Control)
XD1001-BD
Production Devices
Frequency
(GHz)
Gain
(dB)
Gain
Flatness
(dB)
Noise
Figure
(dB)
Output
P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
Package
Applications
.0003-20.0
10.0
+/- 0.5
6.5
+23.0
+30.0
250 @ 8.0
DIE
I/D
.0003-30.0
12.0
+/- 0.5
4.5
+18.0
+31.0
100 @ 5.0
DIE
I/D
.0003-30.0
9.0
+/- 0.5
4.5
+23.0
+30.0
275 @ 8.0
DIE
I/D
0.05-50.0
9.0
+/- 1.5
5.0
+9.0
+17.0
120 @ 8.5
DIE
I/P/D
2.0-18.0
9.0
+/- 0.5
4.5
+19.0
+29.0
115 @ 5.0
DIE
P/D
2.0-22.0
11.5
+/- 0.5
7.0
+24.0
+35.0
300 @ 8.0
DIE
I/D
2.0-22.0
11.0
+/- 1.5
7.5
+28.0
+38.0
350 @ 12.0
DIE
I/D
2.0-22.0
10.0
+/- 1.0
7.5
+30.0
+41.0
690 @ 12.0
DIE
I/D
10.0-40.0
17.0
+/- 2.5
5.0
-
-
115 @ 5.0
DIE
I/P/D
10.0-40.0
12.0
+/- 5.0
6.0
-
-
115 @ 5.0
-QT
(3x3 mm)
I/P/D
10.0-40.0
23.0
+/- 5.0
5.0
-
-
190 @ 5.0
DIE
I/P/D
10.0-40.0
18.0
+/- 5.0
6.0
-
-
170 @ 5.0
-QT
(3x3 mm)
I/P/D
18.0-50.0
17.0
+/- 1.0
5.0
+15.0
+23.0
160 @ 5.0
DIE
I/P/D
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
13
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
GAIN BLOCKS
InGaP HBT Gain Blocks
Part Number
Frequency
(GHz)
P1dB
(dBm)
Gain
(dB)
OIP3
(dBm)
NF
(dB)
Icc
(mA)
Vd / Vs
(Volts)
Rth
Deg/W
Package
Applications
CGB7289-BD
(@ 2140 MHz)
DC-2.5
+23.7
13.5
+41.0
5.5
115
+4.76 / +7.0
35
DIE
I/S/P/D
CGB7289-SC
(@ 2140 MHz)
DC-2.5
+23.7
13.5
+41.0
5.5
115
+4.76 / +7.0
35
-SC (SOT-89)
I/S/P/D
CGB7389-SC
(@ 2450 MHz)
DC-2.7
+23.5
13.0
+40.5
4.5
115
+5.3 / +7.0
35
-SC (SOT-89)
I/S/P/D
DC-6.0
+14.2
20.5
+28.0
3.3
35
+4.1 / +5.0
110
DIE
I/S/P/D
DC-6.0
+14.2
20.5
+28.0
3.3
35
+4.1 / +5.0
110
-SC (SOT-89)
I/S/P/D
DC-6.0
+14.2
20.5
+28.0
3.3
35
+4.1 / +5.0
110
-SP (SOT-86)
I/S/P/D
DC-6.0
+16.6
20.7
+31.5
2.9
50
+4.0 / +5.0
85
DIE
I/S/P/D
DC-6.0
+16.6
20.7
+31.5
2.9
50
+4.0 / +5.0
85
-SC (SOT-89)
I/S/P/D
DC-6.0
+16.6
20.7
+31.5
2.9
50
+4.0 / +5.0
85
-SP (SOT-86)
I/S/P/D
DC-6.0
+17.0
16.5
+32.0
3.6
62
+4.2 / +5.0
85
DIE
I/S/P/D
DC-6.0
+17.0
16.5
+32.0
3.6
62
+4.2 / +5.0
85
-SC (SOT-89)
I/S/P/D
DC-6.0
+17.6
21.0
+32.5
3.2
63
+4.15 / +5.0
85
DIE
I/S/P/D
DC-6.0
+17.6
21.0
+32.5
3.2
63
+4.15 / +5.0
85
-SC (SOT-89)
I/S/P/D
DC-6.0
+17.6
21.0
+32.5
3.2
63
+4.15 / +5.0
85
-SP (SOT-86)
I/S/P/D
DC-6.0
+18.0
15.2
+33.5
4.1
64
+5.08 / +7.0
80
DIE
I/S/P/D
DC-6.0
+18.0
15.2
+33.5
4.1
64
+5.08 / +7.0
80
-SC (SOT-89)
I/S/P/D
DC-6.0
+18.8
19.0
+34.0
4.5
67
+4.95 / +7.0
90
DIE
I/S/P/D
DC-6.0
+18.8
19.0
+34.0
4.5
67
+4.95 / +7.0
90
-SC (SOT-89)
I/S/P/D
DC-6.0
+18.8
21.2
+33.5
3.2
64
+5.15 / +7.0
80
DIE
I/S/P/D
DC-6.0
+18.8
21.2
+33.5
3.2
64
+5.15 / +7.0
80
-SC (SOT-89)
I/S/P/D
DC-6.0
+18.8
21.2
+33.5
3.2
64
+5.15 / +7.0
80
-SP (SOT-86)
I/S/P/D
DC-6.0
+19.2
16.8
+35.3
3.9
73
+5.4 / +7.0
80
DIE
I/S/P/D
DC-6.0
+19.2
16.8
+35.3
3.9
73
+5.4 / +7.0
80
-SC (SOT-89)
I/S/P/D
CGB7001-BD
CGB7001-SC
CGB7001-SP
CGB7003-BD
CGB7003-SC
CGB7003-SP
CGB7004-BD
CGB7004-SC
CGB7005-BD
CGB7005-SC
CGB7005-SP
CGB7006-BD
CGB7006-SC
CGB7007-BD
CGB7007-SC
CGB7008-BD
CGB7008-SC
CGB7008-SP
CGB7009-BD
CGB7009-SC
Vs is supply voltage.
Unless otherwise specified, data is @ 900 MHz.
Gain Blocks......cont. page 15
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
14
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
D - Defense
GAIN BLOCKS
InGaP HBT Gain Blocks...cont. from page 14
Part Number
Frequency
(GHz)
P1dB
(dBm)
Gain
(dB)
OIP3
(dBm)
NF
(dB)
Icc
(mA)
Vd / Vs
(Volts)
Rth
Deg/W
Package
Applications
DC-6.0
+20.0
21.5
+35.5
3.2
75
+5.18 / +7.0
80
DIE
I/S/P/D
DC-6.0
+20.0
21.5
+35.5
3.2
75
+5.18 / +7.0
80
-SC (SOT-89)
I/S/P/D
DC-6.0
+20.3
21.5
+35.5
3.2
75
+5.18 / +7.0
80
-SP (SOT-86)
I/S/P/D
DC-6.0
+21.0
21.7
+36.0
3.4
82
+5.4 / +7.0
80
DIE
I/S/P/D
DC-6.0
+21.0
21.7
+36.0
3.4
82
+5.4 / +7.0
80
-SC (SOT-89)
I/S/P/D
DC-6.0
+21.0
21.7
+36.0
3.4
82
+5.4 / +7.0
80
-SP (SOT-86)
I/S/P/D
DC-6.0
+20.3
15.7
+36.0
4.3
83
+5.48 / +7.0
80
DIE
I/S/P/D
DC-6.0
+20.3
15.7
+36.0
4.3
83
+5.48 / +7.0
80
-SC (SOT-89)
I/S/P/D
DC-6.0
+21.1
23.0
+37.0
4.0
92
+4.8 / +7.0
80
DIE
I/S/P/D
DC-6.0
+21.1
23.0
+37.0
4.0
92
+4.8 / +7.0
80
-SC (SOT-89)
I/S/P/D
DC-6.0
+18.4
22.4
+34.0
3.8
78
+4.3 / +5.0
85
DIE
I/S/P/D
DC-6.0
+18.4
22.4
+34.0
3.8
78
+4.3 / +5.0
85
-SC (SOT-89)
I/S/P/D
DC-8.0
+20.3
24.5
+36.0
3.5
80
+4.75 / +7.0
80
DIE
I/S/P/D
DC-8.0
+20.3
24.5
+36.0
3.5
80
+4.75 / +7.0
80
-SC (SOT-89)
I/S/P/D
DC-8.0
+18.2
23.1
+33.8
3.3
70
+4.5 / +5.0
85
DIE
I/S/P/D
DC-8.0
+18.2
23.1
+33.8
3.3
70
+4.5 / +5.0
85
-SC (SOT-89)
I/S/P/D
0.05-3.0
+20.5
12.5
+37.0
2.8
75
+3 to +5
65
DIE
I/S/P/D
0.05-3.0
+20.5
12.5
+37.0
2.8
75
+3 to +5
65
-SC (SOT-89)
I/S/P/D
0.05-0.9
+22.0
17.0
+41.0
1.6
150
+3 to +5
59
-SC (SOT-89)
I/S/P/D
0.3-3.0
+23.0
16.5
+41.0
1.8
150
+3 to +5
52
DIE
I/S/P/D
0.3-3.0
+23.0
16.5
+41.0
1.8
150
+3 to +5
52
-SC (SOT-89)
I/S/P/D
(@ 2 GHz)
0.25-6.0
+23.0
15.0
+41.0
1.7
150
+3 to +5
50
-AH (3x3 mm)
I/S/P/D
CDQ6004-QS
(dual channel*)
0.05-4.0
+23.0
(+26.0*)
16.5
+41.0
(+44.0*)
2.1
150
+3 to +5
52
-QS (4x4 mm)
I/S/P/D
0.05-3.0
+27.0
14.5
+46.0
2.8
400
+3 to +5
65
-SC (SOT-89)
I/S/P/D
0.8-2.7
+17.0
19.0
+27.0
2.2
75
+3 to +6
55
-AJ (SOIC-8)
I/S/P/D
0.8-2.7
+17.5
20.0
+26.0
3.5
75
+3 to +6
55
-AJ (SOIC-8)
I/S/P/D
CGB7010-BD
CGB7010-SC
CGB7010-SP
CGB7011-BD
CGB7011-SC
CGB7011-SP
CGB7012-BD
CGB7012-SC
CGB7015-BD
CGB7015-SC
CGB7016-BD
CGB7016-SC
CGB7014-BD
CGB7014-SC
CGB7017-BD
CGB7017-SC
CMM6001-BD
CMM6001-SC
CMM6003-SC
MESFET Gain Blocks
CMM6004-BD
CMM6004-SC
CMM6004-AH
CMM6027-SC
CMM2308-AJ
CMM2306-AJ
*balanced configuration
Vs is supply voltage.
Unless otherwise specified, data is @900 MHz.
15
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
L OW N O I S E A M P L I F I E R S
Low Noise Amplifiers
Description
Part Number
Low Noise Amplifier
(Single Supply)
CMM1100-BD
Low Noise Amplifier
(Single Supply/SMT)
CMM1100-QF
Low Noise Amplifier
(Single Supply)
CMM1110-BD
Low Noise Amplifier
(Single Supply)
CMM4000-BD
Low Noise Amplifier
(QFN)
XL1007-QT
Low Noise Amplifier
(Single Supply)
XL1005-BD
Low Noise Amplifier
(Low Noise/Power)
XB1004-BD
Low Noise Amplifier
(Balanced/Single Supply)
XL1001-BD
Low Noise Amplifier
(Balanced/Single Supply)
XL1002-BD
Low Noise Amplifier
XL1010-BD
Low Noise Amplifier
(QFN)
XL1010-QT
Low Noise Amplifier
(Single Supply)
XL1000-BD
Low Noise Amplifier
(Balanced/Single Supply)
XL1003-BD
Low Noise Amplifier
(Low Noise/Power)
XB1005-BD
Low Noise Amplifier
(Balanced/Single Supply)
XL1004-BD
Production Devices
Frequency
(GHz)
Gain
(dB)
Gain
Flatness
(dB)
Noise
Figure
(dB)
Output P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
Package
Applications
2.0-18.0
16.0
+/- 1.0
3.8
+15.0
+25.0
100 @ 5.0
DIE
I/S/P/D
2.0-18.0
16.0
+/- 1.0
4.0
+15.0
+25.0
100 @ 5.0
-QF
(4x4 mm)
I/S/P/D
2.0-18.0
15.0
+/- 1.0
3.2
+13.0
+22.0
70 @ 8.0
DIE
I/S/P/D
2.0-18.0
8.0
+/- 0.5
4.5
+19.0
+29.0
115 @ 5.0
DIE
I/S/D
3.5-8.0
12.0
+/- 2.0
2.0
+10.0
+25.0
33 @ 3.0
-QT
(3x3 mm)
I
5.0-20.0
13.0
+/- 2.0
2.2
+16.0
+26.0
30 @ 5.0
DIE
P/D
16.0-30.0
20.0
+/- 1.0
2.2
+14.0
+24.0
90 @ 4.0
DIE
P
17.0-35.0
14.0
+/- 1.5
2.5
+4.0
+16.0
55 @ 5.0
DIE
P/D
20.0-36.0
23.0
+/- 1.5
2.6
+4.0
+16.0
85 @ 5.0
DIE
P/D
20.0-38.0
17.0
+/- 2.0
3.0
-
-
45 @ 4.0
DIE
I/S/P/D
20.0-38.0
17.0
+/- 2.0
3.0
-
-
45 @ 4.0
-QT
(3x3 mm)
I/S/P/D
20.0-40.0
20.0
+/- 4.0
2.0
+8.0
+16.0
35 @ 3.0 /
50 @ 5.0
DIE
P/D
24.0-40.0
24.0
+/- 3.5
1.7
+11.0
+19.0
65 @ 5.0
DIE
P/D
35.0-45.0
19.0
+/- 1.0
2.7
+13.0
+23.0
50 @ 3.5
DIE
P/D
35.0-45.0
17.0
+/- 2.0
2.0
+6.0
+14.0
85 @ 4.0
DIE
P/D
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
16
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
D - Defense
L OW N O I S E G a A S F E T S
Low Noise GaAs FETs, Die
Part Number
CF007-01
CF003-01
CF001-01
CF003-03
CF001-03
CF004-01
CF004-03
Frequency
(GHz)
P1dB
(dBm)
MSG
(dB)
OIP3
(dBm)
NF
(dB)
Idss
(mA)
Test Volts
(V)
Rth
Deg/W
Die Size
(um)
Gate W/L
(um)
Applications
DC-20.0
+16.0
18.9
+27.0
2.2
60
3 to 5.5
150
420x250
Dual Gate
300/0.5
I/S/P/D
DC-26.0
+22.0
15.0
+32.0
1.8
180
3 to 6
80
720x250
600/0.3
I/S/P/D
DC-32.0
+19.0
17.5
+29.0
1.6
60
3 to 6
150
400x250
300/0.3
I/S/P/D
DC-34.0
+20.0
15.5
+30.0
1.0
180
3 to 6
80
720x250
600/0.3
I/S/P/D
DC-40.0
+17.0
18.5
+27.0
0.8
60
3 to 6
150
400x250
300/0.3
I/S/P/D
DC-40.0
+15.0
15.0
+25.0
2.2
30
3 to 6
300
230x250
150/0.3
I/S/P/D
DC-45.0
+13.0
16.0
+23.0
1.5
30
3 to 6
300
230x250
150/0.3
I/S/P/D
Unless otherwise specified, data is @ 12 GHz.
Low Noise GaAs FETs, Packaged
Part Number
Frequency
(GHz)
Gain
(dB)
Noise Figure
(dB)
Output P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
Package
Applications
DC-10.0
23.5
0.5
+17.0
(+20.0*)
+32.0
(+35.0*)
50 @ 3.0
-QS
(4x4 mm)
I/D
DC-10.0
22.0
0.5
+17.0
+29.0
40 @ 3.0
-SP
(SOT-86)
I/D
DC-10.0
22.0
0.5
+17.0
+32.0
60 @ 3.0
-SP
(SOT-86)
I/D
DC-10.0
22.0
0.5
+17.0
+29.0
40 @ 3.0
-SB
(SOT-343)
I/D
DC-10.0
22.4
0.2
+17.0
+32.0
60 @ 3.0
-SB
(SOT-343)
I/D
DC-15.0
21.5
1.0
+18.5
+28.0
40 @ 6.0
-B
(SC-70)
I/D
DC-15.0
22.0
0.7
+19.0
+29.0
15 @ 3.0
-B
(SC-70)
I/D
DC-15.0
17.0
0.8
+21.0
+34.0
70 @ 4.0
-B
(SC-70)
I/D
DC-15.0
20.0
0.5
+21.0
+34.0
75 @ 4.0
-B
(SC-70)
I/D
DC-15.0
23.5
0.8
+19.5
+31.0
70 @ 4.0
-AK
(SO-8)
I/D
CFC0301-C
(@ 12 GHz)
DC-18.0
10.0
2.6
+23.0
+34.0
80 @ 6.0
-C
(Hermetic)
I/D
CFA0101-A
(@ 12 GHz)
1.0-18.0
9.5
2.8
+19.5
+28.0
40 @ 6.0
-A
(SC-70)
I/D
CFA0103-A
(@ 12 GHz)
1.0-18.0
11.0
0.7
+19.5
+29.0
15 @ 3.0
-A
(SC-70)
I/D
CDQ0303-QS
(dual channel*)
CFP0103-SP
CFP0303-SP
CFS0103-SB
CFS0303-SB
CFB0101-B
CFB0103-B
CFB0301-B
CFB0303-B
CFK0301-AK
Unless otherwise specified, data is @ 2 GHz.
*balanced configuration
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
17
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
MIXERS
Mixers
Description
Balanced
Part Number
XU1012-BD
Balanced
(QFN)
XU1012-QH
Image Reject
(QFN)
XM1001-QH
Image Reject
Image Reject
Balanced
Balanced
(QFN)
Balanced
Image Reject
Image Reject
Balanced
Image Reject
Balanced
Image Reject
XM1001-BD
XM1006-BD
XU1010-BD
XU1010-QH
XM1004-BD
XM1008-BD
XM1003-BD
XM1000-BD
XM1002-BD
XM1005-BD
Production Devices
RF Frequency
(GHz)
LO Frequency
(GHz)
IF Frequency
(GHz)
Conversion Loss
(dB)
IIP3
(dBm)
LO Input Power
(dBm)
Package
Applications
5.0-10.0
3.0-12.0
DC-2.0
8.0
+25.0
+2.0
DIE
P/D
5.0-10.0
3.0-12.0
DC-2.0
8.0
+25.0
+2.0
-QH
(4x4 mm)
P/D
10.0-34.0
8.0-36.0
DC-4.0
6.0
+24.0
+12.0
-QH
(4x4 mm)
P/D
12.0-40.0
8.0-42.0
DC-4.0
8.0
+24.0
+12.0
DIE
P/D
13.0-25.0
11.0-29.0
DC-4.0
7.0
+19.0
+16.0
DIE
P/D
17.0-38.0
8.0-20.0
DC-4.0
10.0
+25.0
+2.0
DIE
P/D
17.0-38.0
8.0-20.0
DC-4.0
10.0
+25.0
+2.0
-QH
(4x4 mm)
P/D
18.0-40.0
14.0-44.0
DC-4.0
9.0
+25.0
+12.0
DIE
P/D
27.0-38.0
12.0-20.0
DC-4.0
8.0
+15.0
+15.0
DIE
P
32.0-42.0
15.0-23.0
DC-4.0
9.0
+14.0
+12.0
DIE
P
32.0-46.0
29.0-47.0
DC-3.0
7.0
+25.0
+15.0
DIE
P
34.0-46.0
30.0-50.0
DC-4.0
8.0
+24.0
+12.0
DIE
P
37.0-46.0
33.0-50.0
DC-4.0
12.0
+27.0
+15.0
DIE
P
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
18
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
D - Defense
M U LT I P L I E R S / O S C I L L ATO R S
Multipliers
Description
Doubler
Part Number
XX1002-BD
Doubler
(QFN)
XX1002-QH
Doubler
(QFN)
XX1000-QT
Doubler
Doubler
Doubler
Doubler
Doubler
(QFN)
Doubler
Doubler
(SMT)
XX1000-BD
XX1005-BD
XX1004-BD
XX1007-BD
XX1007-QT
XX1001-BD
XX1001-QK
RF In
(GHz)
RF Out
(dB)
Pin
(dBm)
Pout
(dBm)
Bias
(mA @ V)
Package
Applications
2.5-6.0
5.0-12.0
-3.0
+16.0
125 @ 5.0
DIE
I/S/P/D
2.5-6.0
5.0-12.0
-3.0
+16.0
125 @ 5.0
-QH
(4x4 mm)
I/S/P/D
7.5-22.5
15.0-45.0
+6.0
+18.0
200 @ 5.0 /
25 @ -2.0
-QT
(3x3 mm)
I/S/P/D
7.5-25.0
15.0-50.0
+0.0
+15.0
200 @ 5.0 /
25 @ -2.0
DIE
I/S/P/D
8.0-12.0
16.0-24.0
+12.0
+16.0
135 @ 3.5
DIE
I/S/P/D
10.0-13.0
20.0-26.0
+9.0
+15.0
70 @ 3.5
DIE
I/S/P/D
13.5-17.0
27.0-34.0
+5.0
+21.0
200 @ 5.0
DIE
I/S/P/D
13.5-17.0
27.0-34.0
+5.0
+21.0
200 @ 5.0
-QT
(3x3 mm)
I/S/P/D
18.0-21.0
36.0-42.0
+0.0
+26.0
530 @ 4.5
DIE
I/S/P/D
18.0-21.0
36.0-42.0
+0.0
+25.0
530 @ 4.5
-QK
(7x7 mm)
I/S/P/D
Oscillators
Description
Part Number
Output Frequency Output Power
(GHz)
(dBm)
XQ1000-BD
Integrated VCO
XQ1001-BD
Integrated VCO
XQ1002-BD
Integrated VCO
XQ1003-BD
Integrated VCO
XQ1004-BD
Integrated VCO
Integrated VCO
(On-Chip Prescaler)
XQ1005-BD
Integrated VCO
(On-Chip Prescaler)
XQ1006-BD
10kHz SSB
Phase Noise
(dBc/Hz)
100kHz SSB
Phase Noise
(dBc/Hz)
Bias
(mA @ V)
Package
Applications
5.5-6.5
+4.5
-77
-97
20 @ -5.0
DIE
P/D
5.8-6.9
+5.0
-77
-97
20 @ -5.0
DIE
P/D
6.4-7.4
+5.0
-77
-97
20 @ -5.0
DIE
P/D
6.8-7.9
+4.5
-77
-97
20 @ -5.0
DIE
P/D
7.4-8.6
+5.0
-77
-97
20 @ -5.0
DIE
P/D
14.2-15.2
+6.0
-
-88
110 @ +4.0
DIE
P/D
14.7-15.7
+5.0
-
-88
110 @ +4.0
DIE
P/D
*200 MHz tuning range
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
19
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
P OW E R A M P L I F I E R S
Power Amplifiers
Description
Part Number
Power Amplifier
(QFN)
CHV2707-QJ
Power Amplifier
Power Amplifier
Power Amplifier
Power Amplifier
PowerAmplifier
(QFN)
Power Amplifier
Power Amplifier
(QFN)
Power Amplifier
Power Amplifier
CMM0014-BD
CMM0015-BD
CMM0016-BD
CMM2321-AK
CHV2710-QJ
CMM3566-LC
XP1035-QH
CMM0618-BD
XP1020-BD
Power Amplifier
(QFN)
CMQ1332-QH
Power Amplifier
(QFN)
XP1033-QT
Power Amplifier
(QFN)
XP1034-QH
Power Amplifier
(QFN)
CMQ1631-QH
Power Amplifier
Power Amplifier
(QFN)
Power Amplifier
Power Amplifier
(Detector)
Power Amplifier
Power Amplifier
Power Amplifier
(SMT)
Power Amplifier
CMM1434-SM
CMQ1432-QH
CMM1631-SM
XP1019-BD
XP1021-BD
XP1022-BD
XP1022-QF
XP1013-BD
Power Amplifier
(SMT)
XP1013-QD
Power Amplifier
(Doubler)
XX1001-BD
Frequency
(GHz)
Gain
(dB)
Gain Flatness
(dB)
Output P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
Package
Applications
0.7-0.8
14.0
+/-0.5
+37.0
+51.0*
730 @ 12.0
-QJ
(6x6 mm)
I
2.0-22.0
11.5
+/- 0.5
+24.0
+35.0
300 @ 8.0
DIE
I/D
2.0-22.0
11.0
+/- 1.5
+28.0
+38.0
350 @ 12.0
DIE
I/D
2.0-22.0
10.0
+/- 1.0
+30.0
+41.0
690 @ 12.0
DIE
I/D
2.3-2.5
20.0
+/- 0.5
+30.0
-
675 @ 5.0
-AK
(SO-8)
I
2.3-2.5
2.5-2.7
10.0
9.0
+/- 0.5
+37.0
+51.0
550 @ 12.0
-QJ
(6x6 mm)
I
3.4-3.5
28.0
+/- 0.5
+29.0
-
520 @ 7.0
-LC
(4x4 mm)
I
5.8-8.5
25.0
+/- 1.0
+29.0
+39.0
500 @ 7.0
-QH
(4x4 mm)
P
6.0-18.0
10.5
+/- 1.5
+29.0
+36.0
750 @ 6.0
DIE
I/D
11.0-19.0
20.0
+/- 1.0
+27.0
(Psat)
-
380 @ 5.0
DIE
S/P
12.5-14.5
33.0
+/-2.0
+32.0
(Psat)
-
770 @ 7.0
-QH
(4x4 mm)
S/D
12.5-15.5
17.0
+/- 1.0
+25.0
+34.0
500 @ 7.0
-QT
(3x3 mm)
P
12.5-15.5
19.0
+/- 1.0
+30.0
+40.0
700 @ 7.0
-QH
(4x4 mm)
P
13.0-18.0
21.0
+/- 0.5
+29.0
-
770 @ 7.0
-QH
(4x4 mm)
S/D
13.5-14.5
31.0
+/- 1.5
+34.5
(Psat)
-
1.5 A @ 6.0
-SM
(6x6 mm)
S/D
13.5-15.5
32.0
+/- 2.0
+32.0
(Psat)
-
770 @ 7.0
-QH
(4x4 mm)
S/D
16.0-18.0
26.5
+/- 0.5
+32.0
(Psat)
-
770 @ 7.0
-SM
(6x6 mm)
S/D
16.0-24.0
18.0
+/- 1.0
+27.0
(Psat)
-
500 @ 5.0
DIE
P
17.0-22.0
22.0
+/- 0.5
+27.0
(Psat)
-
450 @ 5.0
DIE
P
17.0-25.0
20.0
+/- 2.0
+28.0
+35.0
700 @ 5.0
DIE
P
17.0-25.0
20.0
+/- 2.0
+28.0
+35.0
700 @ 5.0
-QF
(4x4 mm)
P
17.0-26.0
20.0
+/- 2.0
+24.0
(Psat)
-
320 @ 6.0
DIE
P
17.0-26.0
19.0
+/- 2.0
+23.0
(Psat)
-
320 @ 6.0
-QD
(7x7 mm)
P
18.0-21.0 (fin)
36.0-42.0 (fout)
26.0
+/- 0.5
+26.0
(Psat)
-
530 @ 4.5
DIE
P
* EVM = 2.5% @ 1W
Power Amplifiers......cont. page 21
Production Devices
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
20
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
D - Defense
P OW E R A M P L I F I E R S
Power Amplifiers...cont. from page 20
Description
Part Number
Frequency
(GHz)
Gain
(dB)
Gain Flatness
(dB)
Output P1dB
(dBm)
OIP3
(dBm)
Bias
(mA @ V)
Power Amplifier
(Doubler/SMT)
XX1001-QK
18.0-21.0 (fin)
36.0-42.0 (fout)
25.0
+/- 0.5
+25.0
(Psat)
-
24.0-34.0
16.0
+/- 1.0
+24.0
(Psat)
26.0-31.0
32.0
+/- 1.0
27.0-32.0
22.0
27.0-33.0
Power Amplifier
Power Amplifier
Power Amplifier
XP1023-BD
XP1024-BD
XP1026-BD
Power Amplifier
(Balanced)
XP1027-BD
Power Amplifier
(Detector)
XP1003-BD
Power Amplifier
Power Amplifier
(Detector)
Power Amplifier
Power Amplifier
(Balanced)
Power Amplifier
Power Amplifier
Power Amplifier
Power Amplifier
XP1025-BD
XP1017-BD
XP1032-BD
XP1005-BD
XP1011-BD
XP1012-BD
XP1018-BD
XP1031-BD
Power Amplifier
(SMT)
XP1031-QK
Power Amplifier
(Balanced)
XP1015-BD
Power Amplifier
Power Amplifier
XP1016-BD
XP1028-BD
Production Devices
Package
Applications
530 @ 4.5
-QK
(7x7 mm)
I/S/P/D
-
320 @ 6.0
DIE
S/P/D
+26.0
+36.0
1.1 A @ 4.5
DIE
P/D
+/- 1.0
+33.0
(Psat)
-
1.0 A @ 6.0
DIE
S/D
21.0
+/- 1.0
+36.0
(Psat)
-
2.1 A @ 6.0
DIE
S/D
27.0-35.0
15.0
+/- 1.0
+24.0
+34.0
440 @ 4.5
DIE
P/D
28.0-31.0
27.0
+/- 1.0
+30.0
(Psat)
-
420 @ 5.0
DIE
S/D
30.0-36.0
16.0
+/- 0.5
+24.0
+33.0
440 @ 4.5
DIE
P/D
32.0-36.0
25.0
+/- 0.5
+33.0
(Psat)
-
1.8 A @ 6.0
DIE
S/D
35.0-43.0
26.0
+/- 2.0
+24.0
(Psat)
-
500 @ 4.5
DIE
P
36.0-40.0
21.0
+/- 0.5
+27.0
+36.0
640 @ 5.0
DIE
P
37.0-40.0
15.0
+/- 0.5
+28.0
+37.0
1080 @ 5.0
DIE
P
37.0-42.0
26.0
+/- 1.5
+25.0
+34.0
475 @ 5.0
DIE
P
37.0-42.0
23.0
+/- 2.5
+25.0
+35.0
600 @ 5.0
DIE
P/D
37.0-42.0
23.0
+/- 2.5
+25.0
+35.0
600 @ 5.0
-QK
(7x7 mm)
P/D
43.5-46.5
13.0
+/- 1.0
+31.0
-
2.8 A @ 5.0
DIE
P/D
43.5-46.5
14.0
+/- 1.0
+24.0
-
720 @ 5.0
DIE
P/D
43.5-46.5
14.0
+/- 1.0
+29.0
-
1.4 A @ 5.0
DIE
P/D
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
21
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
P OW E R G a A s F E T s / P R E S C A L E R S
Power GaAs FETs, Die
Part Number
CF010-01-BD
CF005-01-BD
CF015-11-BD
CF003-01-BD
Freq
(GHz)
P1dB
(dBm)
MSG
(dB)
OIP3
(dBm)
Idss
(mA)
Test Volts
(V)
Rth
Deg/W
Die Size
(um)
Gate W/L
(um)
Applications
DC-22.0
+28.0
15.0
+38.0
700
6
25
850 x 320
2400/≤0.5
I/S/P/D
DC-24.0
+25.0
15.5
+35.0
310
6
50
470 x 320
1200/≤0.5
I/S/P/D
DC-24.0
+25.0
16.0
+33.0
310
6
40
1350 x 250
1200/≤0.3
I/S/P/D
DC-26.0
+22.0
15.0
+32.0
180
6
80
720 x 250
600/≤0.3
I/S/P/D
Freq
(GHz)
P1dB
(dBm)
Gain
(dB)
OIP3
(dBm)
Padded
Eff %
Icc
(mA)
Test Volts
(V)
Rth
Deg/W
Package
Applications
0.8-1.0
+30.0
20.0
+40.0
42
400
8
12
-AK
(SO-8)
I
0.8-1.0
+34.0
20.0
+44.0
43
800
8
9
-AK
(SO-8)
I
0.8-1.0
+36.0
19.0
+47.0
43
1300
8
7.5
-H
(Flange)
I
1.8-2.0
+31.0
13.5
+41.0
40
400
8
12
-AK
(SO-8)
I
1.8-2.0
+34.0
14.0
+44.0
43
800
8
9
-AK
(SO-8)
I
1.8-2.0
+36.0
13.0
+47.0
43
1300
8
7.5
-H
(Flange)
I
2.3-2.5
+30.5
12.0
+41.0
40
400
8
12
-AK
(SO-8)
I
2.3-2.5
+34.0
12.0
+44.0
43
800
8
9
-AK
(SO-8)
I
2.3-2.5
+35.5
10.0
+46.0
42
1300
8
7.5
-H
(Flange)
I
Power GaAs FETs, Packaged
Part Number
CFK2062-P1
CFK2162-P1
CFH2162-P1
CFK2062-P3
CFK2162-P3
CFH2162-P3
CFK2062-P5
CFK2162-P5
CFH2162-P5
Prescalers & Dividers
Description
Divide-by-Four
Divide-by-Four
(QFN)
Part Number
XE1001-BD
XE1001-QT
Production Devices
RF In
(GHz)
RF Out
(GHz)
Pin
(dBm)
Pout
(dBm)
Bias
(mA @ V)
Package
Applications
2.0-19.0
0.5-4.25
-20.0-+5.0
-
80 @ 5.0
DIE
P/D
2.0-19.0
0.5-4.25
-20.0-+5.0
-
80 @ 5.0
-QT
(3x3 mm)
P/D
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
22
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
D - Defense
RECEIVERS / SWITCHES
Receivers
Description
Receiver
Part Number
XR1011-BD
Receiver
(QFN)
XR1011-QH
Receiver
(LO Buffer)
XR1007-BD
Receiver
(SMT)
XR1007-QD
Receiver
(LO Buffer)
XR1009-BD
Receiver
XR1000-BD
Receiver
(LO Buffer)
XR1006-BD
Receiver
(SMT)
XR1006-QD
Receiver
(SMT)
XR1002-QB
Receiver
(Attenuator)
XR1002-BD
Receiver
(LO Buffer)
XR1005-BD
Receiver
(SMT)
XR1005-QD
Receiver
(LO Buffer)
XR1004-BD
Receiver
Receiver
(SMT)
XR1001-BD
XR1008-QB
RF
Frequency
LO
Frequency
IF
Bandwidth
Conversion
Gain
Noise
Figure
Image
LO
Rejection Input Power
Bias
(mA @ V)
Package
Applications
5.0-10.0
3.0-12.0
DC-2.0
14.0
1.5
20.0
+4.0
130 @ 4.0
DIE
P/D
5.0-10.0
3.0-12.0
DC-2.0
14.0
1.7
20.0
+4.0
130 @ 4.0
-QH
(4x4 mm)
P/D
11.0-17.0
8.0-20.0
DC-3.0
13.5
2.2
20.0
+3.0
150 @ 5.0
DIE
P/D
11.0-17.0
8.0-20.0
DC-3.0
13.5
2.5
20.0
+3.0
150 @ 5.0
-QD
(7x7 mm)
P/D
12.0-36.0
6.0-18.0
DC-3.5
10.0
3.0
20.0
+4.0
180 @ 4.0
DIE
P/D
17.0-27.0
15.0-29.0
DC-2.0
10.0
3.5
15.0
+15.0
90 @ 3.0
DIE
P
18.0-25.0
7.0-11.5
DC-3.0
8.0
2.5
15.0
+2.0
250 @ 4.0
DIE
P
18.0-25.0
7.0-11.5
DC-3.0
8.0
3.0
15.0
+2.0
250 @ 4.0
-QD
(7x7 mm)
P
18.0-30.0
14.0-34.0
DC-4.0
2.0-14.0
3.0
25.0
+15.0
135 @ 4.5
-QB
(7x7 mm)
P/D
18.0-34.0
14.0-38.0
DC-4.0
2.0-14.0
3.0
25.0
+15.0
135 @ 4.5
DIE
P/D
19.0-26.0
8.0-14.5
DC-3.0
8.0
2.5
20.0
+2.0
250 @ 4.0
DIE
P/D
19.0-26.0
8.0-14.5
DC-3.0
8.0
3.0
20.0
+2.0
250 @ 4.0
-QD
(7x7 mm)
P/D
30.0-46.0
15.0-25.0
DC-4.0
9.0
3.5
18.0
+2.0
200 @ 4.0
DIE
P/D
33.0-40.0
15.5-21.5
DC-3.0
9.0
4.0
12.0
+12.0
30 @ 3.0
DIE
P
35.0-45.0
16.0-24.0
DC-4.0
9.0
3.5
18.0
+2.0
200 @ 4.0
-QB
(7x7 mm)
P/D
Switches
Description
Switch
Part Number
CSW0118-BD
Production Devices
Freq
(GHz)
Insertion Loss
(dB)
Input P1dB
(dBm)
Isolation
(dB)
VSWR
(dB)
Bias
(mA @ V)
Applications
0.5-18.0
1.8
+20.0
-30
1.5:1
150 @ 3.0
I/D
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
D - Defense
23
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
TRANSMITTERS
Transmitters
Description
Up-Converter
Part Number
XU1012-BD
Up-Converter
(QFN)
XU1012-QH
Transmitter
(LO Buffer/IR)
XU1005-BD
Transmitter
(SMT)
XU1005-QD
Transmitter
Up-Converter
XU1000-BD
XU1010-BD
Up-Converter
(QFN)
XU1010-QH
Transmitter
(LO Buffer/IR)
XU1002-BD
Transmitter
(SMT)
XU1002-QD
Transmitter
(LO Buffer/GC)
XU1009-BD
Transmitter
(LO Buffer/IR)
XU1003-BD
Transmitter
(SMT)
XU1003-QD
Transmitter
(LO Buffer/IR)
XU1007-BD
Transmitter
(Image Reject)
XU1001-BD
Transmitter
(LO Buffer)
XU1004-BD
Transmitter
(LO Buffer)
XU1006-BD
Transmitter
(LO Buffer/SMT)
XU1006-QB
Production Devices
RF
LO
Frequency Frequency
(GHz)
(GHz)
IF
Bandwidth
(GHz)
Conversion
Gain
(dB)
LO
Input Power
(dBm)
Output
P1dB
(dBm)
Output
IP3
(dBm)
Bias
(mA @ V)
Package
Applications
5.0-10.0
3.0-12.0
DC-2.0
-8.0
+2.0
+7.0
+17.0
120 @ 4.0
DIE
P
5.0-10.0
3.0-12.0
DC-2.0
-8.0
+2.0
+7.0
+17.0
120 @ 4.0
-QH
(4x4 mm)
P
10.0-18.0
7.0-21.0
DC-3.0
9.0
+6.0
-
+17.0
350 @ 5.0
140 @ -5.0
DIE
S/P
10.0-18.0
7.0-21.0
DC-3.0
8.0
+6.0
+11.0
-
350 @ 5.0
140 @ -5.0
-QD
(7x7 mm)
S/P
17.0-27.0
15.0-29.0
DC-2.0
0.0
+12.0
+2.0
+12.0
23 @ 3.0
DIE
P
17.0-38.0
8.0-20.0
DC-4.0
-10.0
+2.0
+5.0
+15.0
220 @ 5.0
50 @ 50.0
DIE
P/D
17.0-38.0
8.0-20.0
DC-4.0
-10.0
+2.0
+5.0
+15.0
220 @ 5.0
50 @ 50.0
-QH
(4x4 mm)
P/D
18.0-25.0
7.0-11.5
DC-3.0
10.0
+2.0
+12.0
+20.0
350 @ 4.0
DIE
P
18.0-25.0
7.0-11.5
DC-3.0
9.0
+2.0
+12.0
+20.0
350 @ 4.0
-QD
(7x7 mm)
P
18.0-36.0
7.0-20.0
DC-4.0
9.0
+2.0
+16.0
+25.0
515 @ 5.0
DIE
P/D
19.0-26.0
8.0-14.5
DC-3.0
10.0
+2.0
+12.0
+20.0
350 @ 4.0
DIE
P
19.0-26.0
8.0-14.5
DC-3.0
10.0
+2.0
+12.0
+20.0
350 @ 4.0
-QD
(7x7 mm)
P
27.0-36.0
11.5-20.0
DC-4.0
9.0
+2.0
+13.0
+21.0
370 @ 4.0
DIE
P
33.0-40.0
15.5-21.5
DC-3.0
8.0
+12.0
+11.0
+20.0
30 @ 3.0
DIE
P
35.0-45.0
16.0-25.0
DC-4.0
5.0
+4.0
+6.0
+14.0
300 @ 4.0
DIE
P
35.0-45.0
16.0-25.0
DC-4.0
3.0
+4.0
+12.0
+20.0
230 @ 4.0
DIE
P
36.0-42.0
16.0-25.0
DC-4.0
3.0
+4.0
+12.0
+20.0
230 @ 4.0
-QB
(7x7 mm)
P
Pre-production Devices
I - Infrastructure
S - SatCom
P - Point-to-Point
24
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
D - Defense
ROHS PROGRAM
Mimix Lead-Free RoHS Compliant Program
Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other
environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional
replacements for their non-RoHS equivalents. Finish of our RoHS compliant parts is 100% Matte Tin (Sn) over copper alloy and is
backwards-compatible with current standard SnPb low temperature reflow processes, as well as higher temperature (260°C reflow)
“Pb Free” processes. All bare die products are RoHS compliant.
Part Numbering Designator
XR1002
NF~3.0dB
For Mimix lead-free products, the letter “G” will be used in the part number for Matte Tin plated
RoHS compliant components
in the second position of the part number suffix, as shown below:
IR Mixer
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
Printe
BPF
IR~18dB
G=14dB
Example A: CXX1234-XX-0G00 = component bulk quantity Matte Tin plated RoHS compliant parts
For those customers not making the change at this time, Mimix will maintain production of current configurations. For questions
and comments email: ourearth@mimixbroadband.com.
Atten=0-12dB
LO(+15dBm)
23.5-25.5 GHz
RoHS Compliant Parts
All Mimix products are RoHS compliant unless specifically ordered with Tin-Lead finish.
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
G=17dB
Printed
BPF
IR Mixer
IR~22dB
IF Out
4 GHz
AGC Control
Dynamic Range=60 dB
LO(+15dBm)
20.5-22.5 GHz
IF2
In
Det
Out
XP1005
XU1004
LO In
1/2 Frequency
RF
x2
LO
DOUBLER BUFFER
RF
BUFFER
BALANCED
MIXER
POWER AMPLIFIER
IF1
In
XR1004
IF2
Out
LNA
LO In
1/2 Frequency
IMAGE
REJECT
MIXER
x2
RF
In
LO
DOUBLER BUFFER
IF1
Out
25
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
Re
Ou
PA C K A G I N G O U T L I N E S
XR1002
NF~3.0dB
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
Printed
BPF
IR Mixer
IR~18dB
G=14dB
IF Out
4 GHz
XR1002
NF~3.0dB
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
AGC Control
Dynamic Range=60 dB
IR Mixer
IR~18dB
G=14dB
Atten=0-12dB
Part Type
LO(+15dBm)
Part
23.5-25.5 GHz
Number
Frequency
Gain
Atten=0-12dB
Out
ut
P1005
Reff
Out
O
WEER
R AMPLIFIER
DIPLEXER
X
LO
O In
1/2 Frequencyy
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
26
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
G=17dB
PA C K A G I N G O U T L I N E S
Printed
BPF
r
B
IF Out
4 GHz
AGC Control
Dynamic Range=60 dB
LO(+15dBm)
23.5-25.5 GHz
IF2
In
Det
Out
XP1005
Ref
Out
XU1004
LO In
1/2 Frequency
RF
x2
LO
DOUBLER BUFFER
RF
BUFFER
BALANCED
MIXER
RF
Out
POWER AMPLIFIER
IF1
In
XR1004
IF2
Out
DIPLEXER
LNA
Printed
BPF
IR Mixer
IR~22dB
LO In
1/2 Frequency
IF Out
4 GHz
IMAGE
REJECT
MIXER
x2
RF
In
LO
DOUBLER BUFFER
IF1
Out
AGC Control
Dynamic Range=60 dB
LO(+15dBm)
20.5-22.5 GHz
27
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
PA C K A G I N G O U T L I N E S
XR1002
NF~3.0dB
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
Printed
BPF
IR Mixer
IR~18dB
G=14dB
IF Out
4 GHz
XR1002
NF~3.0dB
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
AGC Control
Dynamic Range=60 dB
IR Mixer
IR~18dB
G=14dB
Atten=0-12dB
Part Type
LO(+15dBm)
Part
23.5-25.5 GHz
Number
Frequency
Gain
Atten=0-12dB
Out
ut
P1005
Reff
Out
O
WEER
R AMPLIFIER
DIPLEXER
X
LO
O In
1/2 Frequencyy
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
28
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
G=17dB
r
B
H A N D L I N G & A S S E M B LY I N F O R M AT I O N
CAUTION! -
Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
•
•
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
•
Observe government laws and company regulations when discarding this product.This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Printed
BPF
IF Out
4 GHz
Life Support Policy
Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the
express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or
systems are devices
or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose
AGC Control
Dynamic Range=60 dB
failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected
to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose
LO(+15dBm)
failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or
23.5-25.5 GHz
effectiveness.
ESD
Gallium Arsenide (GaAs) devices are susceptible to electrostatic and mechanical damage. Die are supplied in antistatic containers,
which should be opened in clean room conditions at an appropriately grounded anti-static workstation. Devices need careful
handling using correctly designed collets, vacuum pickups or, with care, sharp tweezers.
Die Attachment
IF2
In
Det
Out
XP1005
Ref
Out
GaAs products from Mimix Broadband are 0.100 mm
(0.004") thick and have vias through to the backside to enable grounding to
XU1004
RF
In
the circuit. Microstrip substrates should be LO
brought
asx2close to the die as possible.The mounting surface should be clean and flat. If
1/2 Frequency
using conductive epoxy, recommended epoxies are Tanaka TS3332LD, Die Mat DM6030HK or DM6030HK-Pt cured in a nitrogen
RF
atmosphere per manufacturer's cure schedule. Apply epoxy sparingly to avoid getting any on to the top surface of the die. An epoxy
Out
fillet should be visible around the total die periphery. For additional information please see the Mimix "Epoxy Specifications for Bare
Die" application note. If eutectic mounting is preferred, then a fluxless gold-tin (AuSn) preform, approximately 0.001 thick, placed
IF1
IF2
In
between the die and the attachment surface should be used. A die bonder
thatXR1004
utilizes a heated Out
collet and provides scrubbing
LO
DOUBLER BUFFER
RF
BUFFER
BALANCED
MIXER
POWER AMPLIFIER
DIPLEXER
action to ensure total wetting to prevent void formation in a nitrogen atmosphere is recommended.The gold-tin eutectic (80% Au
RF
20% Sn) has a melting point of approximately 280ºC (Note: Gold Germanium should be avoided).The work station temperature
In
LO In
should be 310ºC±10ºC.
be keptx2 to a minimum.The collet should be heated, and
Printed Exposure to these extreme temperatures should
1/2 Frequency
LNA
IMAGE
REJECT
MIXER
IR Mixer
IR~22dBthe
BPF
IF Out
LO
DOUBLER BUFFER
die pre-heated to avoid excessive
thermal shock. Avoidance of air bridges and force impact are critical during placement.
4 GHz
Wire Bonding
IF1
Out
Windows in the surface passivation
AGC Control above the bond pads are provided to allow wire bonding to the die's gold bond pads.The
Dynamic Range=60 dB
recommended wire bonding procedure uses 0.076 mm x 0.013 mm (0.003" x 0.0005") 99.99% pure gold ribbon with 0.5-2%
elongation to minimize RF port bond inductance. Gold 0.025 mm (0.001") diameter wedge or ball bonds are acceptable for DC Bias
LO(+15dBm)
connections.
20.5-22.5 GHz Aluminum wire should be avoided.Thermo-compression bonding is recommended though thermosonic bonding may
be used providing the ultrasonic content of the bond is minimized. Bond force, time and ultrasonics are all critical parameters.
Bonds should be made from the bond pads on the die to the package or substrate. All bonds should be as short as possible.
29
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
E VA L U AT I O N M O D U L E S
Multiple modules can be used together to provide a brass board proof of concept.
Evaluation Modules
Provide a fast and convenient means of testing the performance of our devices.
XR1002
NF~3.0dB
Printed
Example of an Evaluation Module
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
G=14dB
IR Mixer
IR~18dB
BPF
IF Out
4 GHz
XR1002
NF~3.0dB
Single-Ended with Power Detector Output
Input/Output Return Loss Comparable to Die Itself
AGC Control
K-Connector Interface for RF In/Out Ports
RF IN
27.5-29.5 GHz
-20dBm to -80dBm
Dynamic Range=60 dB
Utilizes Active Biasing and Voltage Sequencing
Atten=0-12dB
Open Access to Bias Board LO(+15dBm)
for Easy Adjustment
Part
23.5-25.5 GHz
Frequency
Part Type
Number
Built-In Regulator
and Negative
Voltage Generator
IR Mixer
IR~18dB
G=14dB
Gain
Single 8V Input Voltage
Atten=0-12dB
Out
ut
P1005
Reff
Out
O
WEER
R AMPLIFIER
DIPLEXER
X
Mimix offers evaluation modules for many of our products.
Email info@mimixbroadband.com for pricing and availability.
LO
O In
1/2 Frequencyy
XR1002
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
30
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
G=17dB
O R D E R I N G I N F O R M AT I O N
Mimix Broadband offers various options for shipment of our semiconductors, whether bare die devices, packaged parts or
evaluation modules.
We offer the following options for bare die products: (1) Grip Ring for complete wafers; (2) Waffle Tray for die; and (3) Vacuum
Release “Gel” Pack for die. (Note: Due to the size of some devices (i.e. single FET devices) Waffle Trays may not be an option.)
The Mimix preferred package is Gel Pack, which provides the greatest protection from shipping damage.
Mimix Broadband also offers a wide range of packaged products.These products are typically offered in bulk or tape and reel
Printed
configurations.
r
B
BPF
IF Out
4 GHz
Evaluation modules are also available for most of our products.
Please refer to each
datasheet for complete, detailed part number ordering information.When placing orders, please use the
AGC Control
Dynamic
Range=60
dB
complete part number for accurate
packaging and shipment.
Product & Technical Support
LO(+15dBm)
23.5-25.5 GHz
Field Application Engineers
Tel: 281.988.4600
Fax: 281.988.4615
technicalhelp@mimixbroadband.com
IF2
In
Det
Out
XP1005
Ref
Out
XU1004
LO In
1/2 Frequency
RF
x2
LO
DOUBLER BUFFER
RF
BUFFER
BALANCED
MIXER
RF
Out
POWER AMPLIFIER
IF1
In
XR1004
IF2
Out
DIPLEXER
LNA
Printed
BPF
IR Mixer
IR~22dB
LO In
1/2 Frequency
IF Out
4 GHz
IMAGE
REJECT
MIXER
x2
RF
In
LO
DOUBLER BUFFER
IF1
Out
AGC Control
Dynamic Range=60 dB
LO(+15dBm)
20.5-22.5 GHz
31
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
S A L E S R E P R E S E N TAT I V E S
Eastern United States
GEORGIA, NORTH CAROLINA, SOUTH
CAROLINA,TENNESSEE, ALABAMA,
MISSISSIPPI, FLORIDA
Electronic XR1002
Marketing Associates (EMA)
185 Wind Chime
Court, Suite 103
NF~3.0dB
Raleigh, NC 27615
IR Mixer
Tel: 919-847-8800
RF IN
IR~18dB
G=14dB
Fax:GHz
919-848-1787
27.5-29.5
-20dBm to
-80dBm
Email:
rdenny@emarep.com
Website: www.emarep.com
Alabama Office
7500 S Memorial Pkwy, Suite 215 K
Huntsville, AL 35802
Atten=0-12dB
Tel: 256-880-8050
Fax: 256-880-8054 Part Type
Email: djones@emarep.com
Website: www.emarep.com
MICHIGAN, OHIO, INDIANA,
KENTUCKY,WESTERN PENNSYLVANIA
(EXCLUDING STATE COLLEGE),
WISCONSIN, ILLINOIS, MINNESOTA,
IOWA, MISSOURI, NORTH DAKOTA,
SOUTH DAKOTA, NEBRASKA, KANSAS
Cain-Forlaw Co.
(Territory covered: Illinois,Wisconsin)
Printed
Palatine
Office
BPF
IF Out
510 N. Plum Grove Rd
4 GHz
Palatine, IL 60067
Tel: 847-202-9898
Fax: 847-202-9896
Website: www.cain-forlaw.com
AGC Control
Dynamic Range=60 dB
LO(+15dBm)
Part
23.5-25.5 GHz
Number
Eastern Florida Office
873 Cynthianna Circle
Altammonte Springs, FL 32701
Email: atravitsky@emarep.com
Florida Panhandle Office
25 W Laurel Ave
Mc Minnville,TN 37110
Tel: 931-815-9604
Mobile: 423-431-8014
Email: wvanatta@emarep.com
Website: www.emarep.com
Cedar Rapids Office (Territory covered: Iowa,
Kansas, Missouri, Northeastern and Southern
Illinois)
Frequency
3343
Southgate Ct. SWGain
Suite 213
Cedar Rapids, IA 52404
Tel: 319-286-9898
Fax: 319-286-9899
Mobile: 319-350-8658
Email: mark.roskopf@cain-forlaw.com
Website: www.cain-forlaw.com
Chicago Office
Tel: 773-929-0678
Fax: 773-929-0679
Mobile: 773-330-0376
Email: kelly.scannell@cain-forlaw.com
Website: www.cain-forlaw.com
Ft.Wayne Office (Territory covered: Indiana,
Michigan, Kentucky, Cincinnati)
4660 W. Jefferson,
Suite 130
Ft.Wayne, IN 46804
Tel: 260-436-4466
Fax: 260-436-8995
Mobile: 260-437-2366
LO
O In
Email: lee.klaus@cain-forlaw.com
1/2 Frequencyy
Website: www.cain-forlaw.com
Georgia Office
8820 N Mount Drive, Suite B
Alpharetta, GA 30022-5429
Tel: 770-448-1215
Fax: 770-558-2020
Email: bbyron@emarep.com
Website: www.emarep.com
Western Florida Office
3224 Park Walk Court
Plant City, FL 33563
Tel: 813-719-9374
Mobile: 813-763-0289
Email: bgagne@emarep.com
Website: www.emarep.com
MAINE, MASSACHUSETTS, NEW
HAMPSHIRE, RHODE ISLAND,VERMONT
High Tech Sales
20 Trafalgar Square
Suite 427
Nashua, NH 03063
Tel: 603-598-4402
Fax: 603-598-9307
Email: hightech.ma.ultranet@rcn.com
Website: www.htssales.com
Minnesota Office (Territory covered:
Minnesota, North Dakota, South Dakota)
201 W.Travelers Trail
Suite 20
Burnsville, MN 55337
Tel: 952-882-4090
Fax: 952-882-9020
Mobile: 612-281-3103
Email: tom.ottoson@cain-forlaw.com
Website: www.cain-forlaw.com
Ohio Office (Territory covered: Ohio,
Pennsylvania)
7323 E. Main St.
Suite B
Reynoldsburg, OH 43068
Tel: 614-861-9500
Fax: 614-861-9510
Mobile: 614-581-5569
Email: tom.nelms@cain-forlaw.com
Website: www.cain-forlaw.com
NEW YORK (LONG ISLAND, NEW YORK
METRO), NEW JERSEY, PENNSYLVANIA,
DELAWARE
SJ Associates
(Territory covered: Long Island, New York
Metro, New Jersey)
500 N.Broadway, Jericho Atrium, Suite 159
Jericho, NY 11753
Tel: 516-942-3232
XR1002
Fax: 516-216-4943
NF~3.0dB
Website: www.sjassoc.com
Parsippany, NJRF IN
Tel: 973-331-8080
27.5-29.5 GHz
Fax: 973-331-8083
-20dBm to -80dBm
IR Mixer
IR~18dB
G=14dB
Mid-Atlantic Office (Territory covered: So.
New Jersey, E. Pennsylvania, Delaware)
131-D Gaither Drive
Mt. Laurel, NJ 08054
Tel: 856-866-1234
Atten=0-12dB
Fax: 856-866-8627
Email: drysz@sjassoc.com
Website: www.sjassoc.com
NEW YORK (UPSTATE NEW YORK)
James E.P1005
Zimmerman Sales
111 Marsh Rd
Pittsford NY 14534
Tel: 585-381-3186
Fax: 585-385-2103
Email: sales@zimmermansales.com
Website: www.zimmermansales.com
Out
ut
Reff
Out
O
WEER
R AMPLIFIER
TEXAS, LOUISIANA, OKLAHOMA
TriTex Technical Sales
Dallas Office
4208 Oak Mount Dr.
Carrollton,TX 75010
Tel: 972-492-2621
Fax: 214-731-1548
Mobile: 214-850-9860
Email: dpgrand@worldnet.att.net
Austin Office
TriTex Technical Sales C/O Len Doiron
9426 Meadow Vale East
Austin,TX 78758
Tel/Fax: 512-339-7523
RF IN
24.5-26.5 GHz
Mobile: 512-663-8321
Email: tritex@austin.rr.com -20dBm to -80dBm
WASHINGTON DC,VIRGINIA,WEST
VIRGINIA, MARYLAND
Marktron
1688 East Gude Dr.
Rockville, MD 20850
Tel: 301-251-8990
Email: sales@marktron.com
Website: www.marktron.com
32
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
DIPLEXER
X
XR1002
NF~3.0dB
G=17dB
r
B
S A L E S R E P R E S E N TAT I V E S
Western United States
ARIZONA, NEW MEXICO, NEVADA
Thorson Desert States, Inc. (TDSI)
14350 N Frank Lloyd Wright Blvd., Suite 1
Scottsdale, AZ 58260
Tel: 480-998-2444
Fax: 480-998-1236
Email: info@tdsiaz.com
Website: www.tdsiaz.com
Printed
COLORADO,
UTAH
BPF
Mercury Microwave Inc.
Kitchener Office
196 Michener Crescent
Kitchener, Ontario, Canada N2A 3V9
Tel: 519-896-9888
Fax: 519-896-6573
Email: laurie.stratton@mercurymicrowave.com
Website: www.mercurymicrowave.com
IF Out
4 GHz
NORTHERN CALIFORNIA (CALIFORNIA:
LO(+15dBm)
MONTEREY, INYO,TULARE, KING
23.5-25.5 GHz
COUNTIES; AND NEVADA: RENO)
Jay Stone and Associates
2109 O'Toole Ave. Suite M
San Jose, CA 95131
Tel: 408-428-2500
Fax: 408-428-9000
Email: shannono@jsarep.com
Website: www.jsarep.com
RUSSIA
May Ltd.
77/79 Shelkovskoe Ave.
Moscow, Russia 107497
Tel: +7-4959135161
Fax: +7-4959135160
Email: import@may.ru
Website: www.may.ru
FRANCE
Electra Technical Sales
Portland Office
12620 SW 3rd Street
Beaverton, OR 97005
Tel: 503-643-5074
Seattle Office
12015 115th Ave, Suite 250
Kirkland,WA 98034
Tel: 425-281-7442
SPAIN
Aspid Comunicaciones
GeneralXP1005
Aranaz 49
28027 Madrid
RF SPAIN
Tel: +34-91-371-77-56
Fax: +34-91-320-10-18
Email: aspidcom@aspidcom.com
Website: www.aspidcom.com
POWER AMPLIFIER
IF2
In
RF
BUFFER
BALANCED
MIXER
GERMANY, AUSTRIA, SWITZERLAND
SOUTHERN CALIFORNIA, BAJA MEXICO
KSA Electronics
1081 Camino Del Rio South, Suite 205
Printed
IR MixerSan Diego, CA 92108 BPF
IR~22dBTel: 619-858-0770
Fax: 619-858-0773
Email: peter@ksa.com
Website: www.ksa.com
IF Out
4 GHz
AGC Control
Dynamic Range=60 dB
BRITISH COLUMBIA, ALBERTA
Portland Office
12620 SW 3rd Street
Beaverton, OR 97005
Tel: 503-643-5074
Datamatik as
Jerikovn 16
1067 Oslo, Norway
Tel: +47-22301730
Fax: +47-22300273
Email: magne.loftesnes@datamatik.no
Website: www.datamatik.no
Kanata Office
37 Grierson Lane
Kanata, Ontario, Canada K2W 1A6
Tel: 613-839-1119
Email: said.eldali@mercurymicrowave.com
Website: www.mercurymicrowave.com
Elexience
9, rue des petits-ruisseaux
BP 61 91371
Verrières-le-buisson Cedex
FRANCE
Tel: +33-1-69-53-80-00
XU1004
Fax: +33-1-60-11-98-09
LO In
x2
Email: info@elexience.fr
1/2 Frequency
LO
Website: www.elexience.fr
DOUBLER BUFFER
RFWave s.r.l.
P.za St. Croce 5
20053 Muggio (MI)
Italy
Tel: +39-039-59-63-225
Fax: +39-039-97-16-167
Mobile: +39-334-1872131
Email: info@rfwave.it
Website: www.rfwave.it
NORWAY
Europe & Middle East
OREGON,WASHINGTON
LO(+15dBm)
20.5-22.5
GHz
Electra
Technical
Sales
ITALY, GREECE,TURKEY
SASKATCHEWAN, MANITOBA,
QUEBEC, NOVA SCOTIA, ONTARIO,
NEW BRUNSWICK, NEWFOUNDLAND,
PRINCE EDWARD ISLAND
Blackhart, LLC
3879 East 120th Ave., Suite 218
Thornton, CO 80233
Tel: 303-539-9376
Email: triemma@blackhartllc.com
AGC Control
Dynamic Range=60 dB
Website: www.blackhartllc.com
Canada
Seattle Office
12015 115th Ave, Suite 250
Kirkland,WA 98034
Tel: 425-281-7442
Omecon Electronic GmbH
IF1
Raiffeisenstr. 12
In
D-83607, Holzkirchen
Germany
Tel: +49 (0)8024-6408-0
Fax: +49 (0)8024-6408-70
LO In
Email: abc@omecon.de
1/2 Frequency
Website: www.omecon.de
ISRAEL
Mti Engineering Ltd.
11 Hamelacha St.
Afek Industrial Park
ROSH HA’AYIN 48091, Israel
Tel: +972-3-9008900
Fax: +972-3-9008902
Email: info@mti-group.co.il
Website: www.mti-group.co.il
Det
Out
Ref
Out
RF
Out
UK & EIRE
IF2
Melcom
OutElectronics Ltd.
Elliott House
Gogmore Lane
RF
LNA
Chertsey
IMAGE
In
REJECT
Surrey KT16
9AP
MIXER
England
LO
DOUBLER BUFFER
Tel: +44 (0)1932-565544
Fax: +44 (0)1932-569988
IF1
Email: melcomsales@melcom.co.uk
Out
Website: www.melcom.co.uk
DIPLEXER
XR1004
x2
Asia
CHINA
Skypeak
B-2917, Jinhui Building
#1009 Nanyou Blvd.
Nanshan District
Shenzhen 518054, P.R. China
Tel: +86-755-2645-8326
Fax: +86-755-2645-8327
Email: wyru@public.szptt.net.cn
33
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
S A L E S R E P R E S E N TAT I V E S
Beijing Office
Room 19A-B, No.2 Building,
International Incubator Park
No. 2 Shangdi Information Road, Haidian District
Beijing, P.R. China
Tel: +86-10-82894048
Fax: +86-10-82894047
XR1002
NF~3.0dB
Chengdu Office
Room 22 City Sunny Building
RFNo.22
IN
Xi Mian G=14dB
Qiao Street
27.5-29.5 GHz
Chengdu,
P.R.
China
-20dBm to -80dBm
Tel/Fax: +86-28-85581670
IR Mixer
IR~18dB
Nanjing Office
3-07,Yan Qing Yuan,
Yan Ming Villa,
Xi Xia District, Atten=0-12dB
Nanjing , P.R. China
Part Type
Tel/Fax: +86-25-8589-5669
Shanghai Office
Room 406, Xin Wen Bao Building
#1376 Jiang Ning Road
Shanghai, P.R. China 200060
Tel: +86-21-6299-5270
Email: hm1973@163.net
Weisher Technologies Co. Ltd.
Shenzhen Office
RM 1602-1604, Huaying Building
Nanshan Road, Nanshan District
Shenzhen, P.R. China 518054
Tel: +86-755-86195636/86195748
Fax: +86-755-86195626
Email: bill@weisher.com
Website: www.weisher.com
Beijing Office
Room 307, Beijin Automobile Mansion
DongSanHuan South Road 25th
ChaoYang District, Beijing
China 100021
Tel: +86-10-87667417
Fax: +86-10-87667427
Email: kevin@weisher.com
Website: www.weisher.com
Chengdu Office
B-10-2, LanSeGangWan Plaza,
59 TianXiang Street
ChengDu, P.R. China 610061
Tel: +86-28-68096047/84300776
Fax: +86-28-84330458
Email: bill@weisher.com
Website: www.weisher.com
Nanjing Office
B4/11F HuaYing International Mansion
No.9, Jinluan Lane, Huahai Road,
Nanjing, P.R. China 210002
Tel: +86-25-84202876
Fax: +86-25-84206115
Email: kevin@weisher.com
Website: www.weisher.com
Well Genius Technology Ltd.
Unit G, 17/F, Somerset House
Taikoo Place
979 King's Road
Quarry Bay, Hong Kong
Tel: +852-2884-4128
Fax: +852-2885-0113
Email: sales@wellgenius.com
Website: www.wellgenius.com
Spur Semicon Inc.
#414, Church Road
New Thippasandra
HAL 3rd Stage
Bangalore -560075
India
Tel: +91-80-25203681
Fax: +91-80-25284223
Printed
BPF
JAPAN
IF Out
Beijing Office
4 GHz
5C, Section D, Fuhua Mansion
No. 8 Chaoyangmen Street
Dongcheng District
Beijing 100027,
P.R. China
AGC Control
Tel: +86-10-6554-6663
Dynamic Range=60 dB
Fax: +86-10-6554-7811
LO(+15dBm)
Part
23.5-25.5 GHz
Number
Chengdu Office
Gain
UnitFrequency
F, 4/F,Vancouver Plaza
No. 1 Qing Jiang East Road
Chengdu 610072, P.R. China
Tel: +86-28-8773-8736
Fax: +86-28-8777-4058
Nanjing Office
No.10, Ma Qun Avenue
Qixia District Nanjing
China 210049
Tel: +86-25-8458-6650
Fax: +86-25-8461-8979
XR1002
Midoriya Electric Co., Ltd. NF~3.0dB
Tokyo Office
2-7-19 Kyobashi,RF
Chuo-ku
IN
G=14dB
Shuzui Bldg.27.5-29.5 GHz
-20dBm
to -80dBm
Tokyo, Japan
04-8307
Tel: +81-3-3561-5763
Fax: +81-3-3561-5794
Website: www.midoriya.co.jp
Osaka Office
3-5-24 Miyahara,Yodogawa-ku
Shinosaka Daiichiseimei Bldg.
Osaka, Japan 532-0003
Tel: +81-6-6395-5509
Fax: +81-6-6395-5519
Website: www.midoriya.co.jp
SOUTHP1005
KOREA
IR Mixer
IR~18dB
Atten=0-12dB
Out
ut
Reff
Out
O
Shanghai Office
9/F, Block B, Hi-Tech Building
No. 900 Yi Shan Road
Shanghai 200233, P.R. China
Tel: +86-21-6495-8888
Fax: +86-21-5423-5889
HM Device Korea Inc.
3F Daejin Bldg., 522-4,
3ga Dangsan-dong
Yeongdeungpo-gu, Seoul
150-084, Korea
WEER
R AMPLIFIER
Tel: +82-2-2676-0036
Fax: +82-2-2676-5225
Website: www.hmdkorea.com
Shenzhen Office
Unit E, 20/F, No. 6 Building
Zhonghai Shenzhen Bay Garden
Shennan Blvd. North
LO
O In
Nanshan District
1/2 Frequencyy
Shenzhen 518053, P.R. China
Tel: +86-755-2600-1581
Fax: +86-755-2600-1561
S-TEC Int'l. Co., Ltd.
Room #1301-1
Youido Department Building,Yeoungdeungpo-Gu
150-749 Seoul Korea
Tel: +82-2-784-9898
Fax: +82-2-784-8600
Email: stecint@stecint.co.kr
Website: www.stecint.co.kr
Xi'an Office
Room 4401, Section 19,WANGUO Garden
Electronic 2nd Street
Yanta District
Xi'an 710065, P.R. China
Tel/Fax: +86-29-8821-4391
SOUTHEAST ASIA (SINGAPORE,
MALAYSIA,THAILAND, INDONESIA,
VIETNAM)
DIPLEXER
X
INDIA
Advanced Semiconductor (India)
#18/6, Executive Chambers
Cunningham Road
Bangalore - 5600052
India
Tel: +91-80-22257230
Fax: +91-80-22202700
RF IN
24.5-26.5 GHz
Emerges-Lite Pte. Ltd.
-20dBm to -80dBm
6 Ubi Road 1, #05-07
Wintech Centre
Singapore 408726
Tel: +65-6749-6818
Fax: +65-6749-1082
Website: www.emerges.com.sg
34
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
XR1002
NF~3.0dB
G=17dB
D I S T R I B U TO R / C O M PA N Y C O N TA C T S
W
S
O R L D W I D E
D
A L E S
I S T R I B U T O R
Richardson Electronics
Toll Free: 800-737-6937
Tel: 630-208-3637
Email: rwc@rell.com
Website: www.rfwireless.rell.com
Printed
BPF
r
B
IF Out
4 GHz
AGC Control
Dynamic Range=60 dB
C
O M P A N Y
C
O N T A C T
LO(+15dBm)
23.5-25.5 GHz
I
N F O R M A T I O N
Sales Contacts:
Product & Technical Information:
Western North America
Alden Lofquist
Field Application Engineers
Tel: 281.988.4600
Vice President Sales
Tel: 408.330.1251
Fax: 408.986.5080
alofquist@mimixbroadband.com
Fax: 281.988.4615
technicalhelp@mimixbroadband.com
General Company Information:
info@mimixbroadband.com
IF2
In
Eastern North America
Vince Pelliccia
XU1004
LO In
1/2 Frequency
Vice President Sales
Tel: 603.552.2024
Fax: 603.218.6298
vpelliccia@mimixbroadband.com
x2
LO
DOUBLER BUFFER
ContactQualityAssurance@mimixbroadband.com
RF
BUFFER
BALANCED
MIXER
All Other Inquiries:
RF
Out
POWER AMPLIFIER
info@mimixbroadband.com
XR1004
IF2
Out
DIPLEXER
LNA
LO In
1/2 Frequency
IF Out
4 GHz
pjhales@mimixbroadband.com
Asia
Peng Zeng
LO(+15dBm)
Sales
Director
20.5-22.5 GHz
Tel: +852 24991798
Ref
Out
RF
Quality Assurance
Contact:
IF1
In
Europe, Middle East, Africa
Peter J. Hales
Vice President Sales
Printed
IR Mixer
BPF
Tel:
+49
2102706155
IR~22dB
Fax: +49 2102706156
Det
Out
XP1005
IMAGE
REJECT
MIXER
x2
RF
In
LO
DOUBLER BUFFER
IF1
Out
AGC Control
Dynamic Range=60 dB
Fax: +852 24991797
pzeng@mimixbroadband.com
35
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
OUR MARKETS
Mimix targets the microwave and millimeter-wave markets, including digital microwave radio, cellular and wireless infrastructure,
military and satellite communications applications.
As networks continue to demand higher bandwidths, frequencies must move up to the microwave and millimeter-wave range in
order to achieve these bandwidths.This development is true for a variety of wireless and optical systems. Mimix is positioned to
meet the market’s requirements by providing higher frequency microwave and millimeter-wave devices used in these applications.
Our designers have focused on the development of state-of-the-art GaAs semiconductors for the last decade.
We support these markets with innovative technology. Our semiconductor devices offer more power over a broader frequency
XR1002
range, place more functionality on a single chip, and achieve best in class low noise performance.We
provide complete
NF~3.0dB
semiconductor solutions, such as entire power amplifier modules, 3-Chip Solutions and low cost packaging.
RF IN
27.5-29.5 GHz
designs
according
to
-20dBm to -80dBm
Printe
BPF
IR Mixer
IR~18dB
G=14dB
In addition to offering standard catalog products, we can develop custom
our customers' requirements. Mimix
is continuously developing new products, so please do not hesitate to inquire about a product that you do not find in this catalog, as
we may already have such a product in development.
Mimix Meets Market Requirements
with High Frequency Devices
Atten=0-12dB
77 GHz
Automotive Radar Systems,
XR1002
Defense Systems
NF~3.0dB
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
Printed
BPF
IR Mixer
IR~22dB
G=17dB
Optical Networking,
PTP
PTMP Systems
High Data Rate SatCom
IF Out
4 GHz
40 GHz
AGC Control
Dynamic Range=60 dB
18 GHz
LO(+15dBm)
20.5-22.5 GHz
Direct TV, Ku-Band SatCom
Military & Other SatCom
Systems
IF2
In
LO In
1/2 Frequency
RF
x2
LO
DOUBLER BUFFER
Det
Out
XP1005
XU1004
Wireless RF Networking
WLAN Infrastructure, WLL
LO(+15dBm)
23.5-25.5 GHz
RF
BUFFER
6 GHz
BALANCED
MIXER
POWER AMPLIFIER
Data & Voice Terminals,
Infrastructure and
ISM Band Products
IF1
In
DC-2 GHz
XR1004
IF2
Out
LNA
LO In
1/2 Frequency
IMAGE
REJECT
MIXER
x2
LO
DOUBLER BUFFER
36
IF1
Out
Characteristic Data and Specifications are subject to change without notice. • September 2007 • www.mimixbroadband.com
RF
In
Re
Ou
O U R C O M M I T M E N T TO Q U A L I T Y A N D
C U S TO M E R S U P P O RT
IF2
In
Det
Out
Ref
Out
XU1004
LO In
1/2 Frequency
RF
x2
RF
Mimix Broadband, Inc. announced
in November 2001 that the
company had been registered to ISO 9001. As part
LO
BUFFER
DOUBLER BUFFER
BALANCED
of the industry's total quality management standard,
this
certification
demonstrates our commitment to quality.
MIXER
Furthermore, the company regards total quality management as a primary and continuous
initiative and
POWER AMPLIFIER
business practice.
IF1
In
Quality Assurance
IF2
Out
XR1004
RF
Out
DIPLEXER
At Mimix, we’ve integrated quality into all of our business processes. Beginning with our ISO 9001-registered
Quality Management System, which includes our comprehensive design and manufacturing processes, and extending
RF
LNA
throughout the company, each employee is empowered to continually identify and
IMAGE implement improvements,
In
REJECT
LO In
x2
MIXER
enhancing product quality and customer satisfaction.We
1/2 Frequency extend this same philosophy to our subcontractors,
LO
DOUBLER BUFFER
including our ISO 9001-registered foundries and our packaging providers.
IF1
Out
Quality Assurance in Design
Mimix’s design methodology takes advantage of our world-class scientists’ expertise in creating products that make
maximum utilization of today’s technology and tomorrow’s technological advances.The products of this expertise
are devices capable of spanning wide performance windows, as well as targeted high performance applications.
B
dB
XP1005
Printed
IR Mixer
IR~22dB
BPFuses a Plan Do Check Act (PDCA) cycle to drive designs from prototyping to their intended
The design process
XR1002
performance targets.The engineering team improves reproducibility
of the design during fabrication to reduce
NF~3.0dB
variability and to improve yields, reliability, and on-time delivery.The integrity of the design evaluation and device
Printed
screening processes assures that our published product specifications accuratelyIRrepresent
the true
Mixer
BPF
RF IN
IR~22dB
G=17dB
24.5-26.5 GHz
device characteristics.
-20dBm to -80dBm
Quality Assurance in Production
LO(+15dBm)
While the devices
20.5-22.5 GHz
we fabricate are designed to provide greater test yields and increased manufacturability, our
post-fabrication processing of devices allows for even greater assurance that delivered products give 100%
satisfaction to the customer.
Some of the features of this processing are:
LO(+15dBm)
LO In
1/2 Frequency
Automated handling for every phase of fabrication, testing, inspection, and packaging; 20.5-22.5 GHz
Det Ref
Laser scribe & break
IF2 process for MIL-STD-883 Method 2010 visual compliance;
Out Out
XP1005
In
100% testing and inspection of devices with traceability from wafer to device; and
XU1004
RF
Tailored
processes to meet customer-specified
requirements.
x2
LO
DOUBLER BUFFER
RF
BUFFER
Quality Assurance in Customer Support
BALANCED
MIXER
RF
Out
Mimix utilizes systems engineering expertise for unsurpassed customer support in applications engineering. Our
Product Management group strives to develop unique customer-supplier relationships that enable efficient
IF1
IF2
communication between
relationships allow us to be responsive to customer
In Mimix and our customers.These
Out
XR1004
requests for support or other needs, so that our customers know they remain our number one priority.
POWER AMPLIFIER
DIPLEXER
Reliability Reports
LO In
LNA
IMAGE
REJECT
MIXER
x2
1/2 Frequency
RF
In
MTTF data can be found for each product in its respective datasheet. All datasheets are available for download at
www.mimixbroadband.com.
LO
DOUBLER BUFFER
IF1
Out
XR1002
NF~3.0dB
IR Mixer
IR~18dB
G=14dB
XR1002
NF~3.0dB
F IN
6.5 GHz
o -80dBm
G=17dB
Printed
BPF
IR Mixer
IR~22dB
Atten=0-12dB
LO(+15dBm)
23.5-25.5 GHz
Supplying High Performance GaAs Semiconductors from DC to 50 GHz
for Wireless Communications and Defense & Space Applications
LO(+15dBm)
20.5-22.5 GHz
Power Amplifiers
High output and high linearity power amplifiers,
available as bare die, SMT packages, or modules.
Buffer Amplifiers
XR1002
Outstanding LO driver/buffer
amplifiers
NF~3.0dB
with low noise and power bias configurations.
IR Mixer
RF IN
IR~22dB
G=17dB
24.5-26.5 GHz
Low Noise Amplifiers
-20dBm to -80dBm
Balanced or self-biased configurations
providing excellent noise figure and input/output match.
Mixers
Broadband, balanced and image reject mixers, providing
excellent linearity and low conversion loss.
Receivers
XR1002
Fully integrated solutions providing minimum distortion
NF~3.0dB
at modulation schemes as high as 256 QAM.
G=14dB
IR Mixer
Transmitters
IR~18dB
Fully integrated solutions offering low DC power
consumption and optional power bias.
Wide Tuning Oscillators
On-chip ÷ 4 prescalers and doublers make them
easy to lock to standard silicon synthesizers.
Available with on-chip filter or use
off-chip resonators.
Distributed & Wideband
Amplifiers
Printed
BPF
Ultra-broadband performance,
providing versatile
solutions for low noise, gain block and
driver stage requirements.
Gain Block Amplifiers
High gain and broad bandwidth gain blocks with
guaranteed reliable performance.
LO(+15dBm)
20.5-22.5 GHz
MESFET Gain Blocks
High dynamic range MESFETs, with excellent low noise,
IP3 and guaranteed performance, available as bare die
or in packages.
FETs
Best in class, lowXR1002
noise, medium and high power FETs,
NF~3.0dB
from DC-45 GHz,
available as bare die or in packages.
RF IN
24.5-26.5 GHz
-20dBm to -80dBm
G=17dB
IR Mixer
IR~22dB
Printed
BPF
To learn more about us, visit
www.mimixbroadband.com
© 2007 All rights reserved. Mimix Broadband, Inc.
Devices shown are enlarged and are not actual size or to scale.
Atten=0-12dB
Mimix Broadband
is a registered trademark of Mimix Broadband, Inc. Any rights not expressly granted herein are reserved.
LO(+15dBm)
LO(+15dBm)
23.5-25.5 GHz
20.5-22.5 GHz
Mimix Broadband, Inc. • 10795 Rockley Rd. • Houston, TX 77099 • 281.988.4600 • www.mimixbroadband.com