Tools
TEST EQUIPMENT
Fluke
• Senses the steady state electrostatic field
produced by a voltage through insulation
without requiring contact to the bare
conductor.
• Upon detection tip glows and beeper sounds
• High density red LED light
• Includes 2 AAA batteries
3115
Item Number
Description
Price
Includes test leads
3115
• Wide 1000 Max Voltage
• True RMS for precise measurement
of non linear signals
• Large easy to read display
• Up to a .09% basic DC accuracy
• Backlight for work in dimly lit areas
Pen style voltage detector light
$21.95
• Min/Max recording
• Current 10A AC/DC
• Resistance 50M
• Frequency 100 K Hz.
• Limited Manufacturer Lifetime Warranty
179
Item Number
Description
Price
Includes test leads
179
• Large digit display with two level bright backlight
• Built in thermometer
• True RMS AC voltage and current for accurate measurements of non linear signals
• .05% DC accuracy
• 4-1/2 digit mode for precise measurements
True RMS digital multimeters, with built in Thermometer • Measure up to 1000V AC and DC
• Limited Manufacturer Lifetime Warranty
• Measure up to 10A, 20A, for up to 30 seconds
• Frequency to 200 kHz. and % duty cycle
• Resistance 50m AC/DC
• Min/Max Recording
Item Number
$299.95
87-5
Description
Price
Includes test leads
87-5
Industrial digital multimeter
$399.95
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
251
Tools
TEST EQUIPMENT
Fluke
• VoltAlert technology for non contact voltage
detection
• AutoVolt automatic AC/DC voltage selection
• LoZ helps prevent false reading due to
ghost voltage
• True-RMS for accurate measurements on
• Measures 10 A(20 A overload) for 30 seconds
• Cat III 600 V safety rated
• Includes holster, manual, and 9V battery
• Min/Max Recording
• 3 Year Manufacturer Warranty
non linear loads
FLUKE 117
Item Number
Description
Price
Includes test leads
FLUKE 117
• True RMS AC voltage and current for accurate
measurements on non-linear signals
• Integrated low pass filter and state of the art signal
processing allows for use in noisy electrical environments while providing stable readings.
• AC and DC current via jaw: 600 A
Electrician’s multimeter with non contact voltage and true RMS $179.95
• Proprietary inrush measurement technology to
filter out noise and capture motor starting current
exactly as the circuit protection sees it.
• Max measurable conductor diameter .13" or 34 mm
• 500 Hz.
• 3 year manufacturer warranty
FLUKE-375
Item Number
Description
Price
Includes test leads & Carrying Case
FLUKE -375
• True RMS AC voltage and current for accurate
measurements on non-linear signals
• Built in thermometer
• Resistance, continuity, and diode test modes
• Low power wireless technology allows
display to be carried up to 10 meters (33 ft.)
away from the point of measurement for
added flexibility.
• Frequency 5Hz. to 50kHz. resolution to .01Hz.
• Radio transmitter automatically turns off
True RMS AC/DC clamp meter
• Min/Max and Average recording to capture
variations automatically
• Easy to ready display with large digits and bright
backlight.
• DC Voltage range .1mV to 1000V accuracy of .25%
• AC Voltage .1mV to 1000V accuracy to 1.0% and DC
Current 1mA to 10A accuracy to 1% and AC Current
1mA to 10A accuracy to 1.5%
• Safety rating Cat IV 600V, CAT III 1000V
• 3 Year Manufacturer Warranty
FLUKE 233
when the display is connected to the meter
Item Number
$326.63
Description
Price
Includes test leads
FLUKE 233
DMM Meter with remote display
$299.95
Images are representative of products listed and may not be actual product.
252
www.wardsmarine.com
Tools
TEST EQUIPMENT
Fluke (continued)
• Battery powered Hall-effect probe measures
1A to 400A AC/DC
• 1 mV/ Amp output guarantees easy ready on
your meter
• Maximum conductor Ø 32 mm-1.18in
• Cat III 600 V safety rating
• 1 Year Manufacturer Warranty
• Takes accurate current reading without
breaking the circuit
I410
Item Number
Description
Price
Includes test leads
I410
Accessory AC/DC Current Clamp
$224.95
Fluke Modular Clips and Probes
• Slide on style for test probes
• Jaws open to 8 mm
• For use with TL71 & TL75 test leads and probe sets
• CAT III 1000 V, 10 A; CAT IV 600V, 10 A
AC72
Item Number
Description
Price
AC72
Alligator Clips
$14.95
• Multi purpose tooth pattern grips anything from fine gauge wire to a 3/4" nut
• Nickel plated steel jaws
• CAT III 1000 V, CAT IV 600 V, 10 A
AC285
Item Number
Description
AC285
SureGrip Alligator Clips
Price
$20.95
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
253
Tools
SUBHEAD
TEST
EQUIPMENT
Fluke Modular Clips and Probes (continued)
• Profile narrows to .22" tip
• Hook opening .20" at front, .08" at base
• CAT III 1000 V, CAT IV 600 V, 3 A
AC280
Item Number
Description
AC280
SureGrip Hook Clips
Price
$ 32.45
• Insulated, nickel plated jaws grip objects up to 3/8"
• Blunt tip grabs round screw heads
• CAT III 1000 V, CAT IV 600 V, 10 A
AC220
Item Number
Description
AC220
SureGrip Alligator Clips
Price
$37.45
Fluke Test Leads
• Extremely hard alloy tips resist wear
• Distinctive comfort grip probes
• CAT III 1000 V, 10 A; CAT IV 600 V, 10 A
TL75
Item Number
Description
TL75
Hard Point Test Lead Set
Price
$20.95
• Recommended for use with AC220, AC280, and AC283 test clips
• Superior strain relief
• CAT III 1000 V, 10 A; CAT IV 600 V, 10 A
TL222
Item Number
Description
Price
TL222
SureGrip Silicone Insulated Test Leads
$24.95
Images are representative of products listed and may not be actual product.
254
www.wardsmarine.com
Tools
TEST EQUIPMENT
SUBHEAD
Fluke Test Leads (continued)
• Retractable insulated sharp probe tip
• CAT II 300 V, 2 A
TL40
Item Number
Description
TL40
Retractable Probe Assembly
Price
$39.95
• Large, solid copper alligator clips with .5" opening
• Flexible silicone insulated lead are heat and cold
resistant
• CAT I 30 V, 10 A
TL28
Item Number
Description
TL28
Automotive Test Lead Set
• DMM test leads (red, black) with safety
• 1.5 mm silicone-insulated wire resists
• Right angle connector on one end and straight
• CAT III 1000 V, 10 A; CAT IV 600 V, 10 A
• Superior strain relief
shrouded, standard diameter banana plugs
connector on the other
Price
$44.95
heat & cold
TL224
Item Number
Description
TL224
SureGrip Insulated Test Leads
Price
$24.95
TPAK
Item Number
Description
Price
Accessories
TPAK
Magnetic meter hanging solution
$39.95
C25
Soft zippered carrying case ( 8.5 x 4.9 x 2.5 in.)
$34.95
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
255
Tools
SUBHEAD
TEST
EQUIPMENT
Tripplett
Fox and Hound
Multimeter
Plug Bug
• Tone Generator includes overload protection
• Large backlit display with bar graph
• Cat IV safety rating
• UL Listed
• 10A AC/DC current
• Lead storage and rubber molding for
• For use on 110 or 125 VAC
(120 VAC Line), Overload Warning Beeper,
High Output Tracer Tone, Selectable tracer
tones, Red/Green telephone line polarity
LEDS (also indicates AC/RING Signal)
• Hound 3 Probe Inductive Tracer features:
streamline design for better access in hard
to reach areas, bandpass filter suppresses
60 Hz. and hi-frequency noise, includes
conductive duck bill tip and metal tips, LED
indicator light gets brighter as the signal
gets stronger
added protection
receptacles
• Detects common wiring
problems in standard and
GFCI outlets
• GFCI “Test in Progress”
LED indicator
• *Note: The Fox & Hound Series is not
intended for use on powered wires or cables.
All wires or cables must be non-powered,
non-grounded, and non-connected.
TRP-3399
Item Number
MM2000
9610
Description Price
Fox and Hound
TRIP-3399
Fox and Hound kit includes: Fox 2 Deluxe Tone Generator with “True Trace” and Hound 3 Probe Inductive Tracer MM2000
True RMS low Impedence Electrician’s/ HVAC Multimeter
$ 120.74
Multimeter
$164.50
Plug Bug
9610
Plug-Bug2 GFCI / Polarity receptacle tester
$8.21
Images are representative of products listed and may not be actual product.
256
www.wardsmarine.com
Tools
TEST EQUIPMENT
SUBHEAD
Inspection Cameras
Tripplett
Klein
• 2.4" TFT LCD Screen
• 72" removable/replaceable snake camera;
• Video/audio & photo recording
• Bright LED work light
• IP67 gooseneck camera
• Screen rotation
• TV-out jack and SD card slot
• File playback
• Kit includes: Main Unit, 17mm gooseneck
can be bent to access hidden locations
• Image can rotate 180 degree
• Camera 7/16" in diameter with 2 adjustable
white LED for illumination
• Camera is waterproof
camera, 1850 Series 3.7V 2000mAh Rechargeable
Li-Ion Battery, mirror camera attachment, magnet
camera attachment, USB power adapter/charger,
USB data/charger cable, RCA composite AIV to
3.5mm mini AIC cable, quick start guide, software
instruction manual CD rom, and carrying case
COBRA CAM
ET500
Item Number
Description
Price
COBRACAM
Portable Inspection Camera
Tripplett
$274.97
Klein
ET500
Video Borescope
$408.00
Blue Seas Systems
Multimeter
• True RMS AC measurement is accurate for normal
sine wave and modified sine wave inverter output
• Simplify operation with Auto Range, selects the
best range that fits the data
• Compact size for comfortable one hand operation,
portability and access to confined areas.
• AC Amps-600 AC Volts-600
• DC Amps-400 DC Volts-600
MINI CLAMP MULTIMETER
Item Number
AC Amps
AC Volts
DC Amps
DC Volts
Price
.01-400
.001-600
$ 184.98
Multimeter
8110
.01-400
.001-600
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
257
Tools
SUBHEAD
TEST
EQUIPMENT
Infrared Thermometer
Klein
Jewell
• K type thermocouple input
• F/C buttons
• 12:1 Spot ratio
• Dual laser targeting
• Max/Min/Avg./Diff
• Backlit Display
• Includes: Case, batteries, and
• 12:1 measurement ratio
• Laser pinpoints measurement
area without making contact
• White, backlit LCD with selectable
K-type thermocouple
Fahrenheit or Celsius reading
IR-2000
• Compact, gun shaped case with
“SilkGrip” for non slip comfort
• 1.5% accuracy
• .1F Resolution
• .95 Fixed Emissivity
PT12
Item Number
Range
Price
IR-2000
-76°F(-60°C) to 1022°F(550°C)
Klein
$170.00
Jewell Instruments
PT12
-26ºF (-32ºC) to 572ºF (300ºC)
$85.00
Hull Testing Meters
• For optimum protection Steel Hulls .85, Aluminum Hulls .95,
and Bronze fittings on Wood Hulls .55
• Meter: 0 to 1.5V full scale
• 1% full scale accuracy
• Impendence 20,000 ohms to 30,000 ohms total
• Reference cell is silver-silver chloride type silver screen
with deposited silver chloride. Half cell insulated cable
length 75ft.
33419-3
Item Number
Description
Price
33419-3
Portable Hull Pontential Meter
$1,298.88
Images are representative of products listed and may not be actual product.
258
www.wardsmarine.com
Tools
TEST EQUIPMENT
HEAT TOOLS
Hull Testing Meters (continued)
• Determines effectiveness of Cathodic Protection
• Checks Bonding System Integrity
• Checks for AC shoreline interference
• Troubleshoots AC and DC electrical systems
• Kit Includes: Fluke model 110 digital multimeter with test leads, Zinc reference probe with
20' of test lead wire, 25' test lead extension,
hardened steel test probe.
902TI
Item Number
Description
902TI
Corrosion Test Instrument Kit
Price
$483.00
Heat Guns
PH-1100
HG-751B
• Proheat Heat Gun: compact, lightweight,
• Master Heat Guns: professional, heavy duty,
• Two heats: 430 ˚F(221 ˚C) & 840 ˚F(449 ˚C)
• 15 CFM air flow
• Built in Stand
• High temperature rating 1000 ˚F(540 ˚C)
• 23 CFM and 3000 FPM
• Adjustable non slip stand
• Sturdy Die Cast Housing
easy to use.
industrial quality, multiple use heat gun
HG-751B
PH-1100
Item Number
Volt
Hz.
Amps
Watts
PH-1100
120
60
6 & 11
656 & 1300
Price
$119.00
HG-751B120 60 14.5 1740 $135.00
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
259
Tools
HEAT TOOLS
Torches and Irons
Turbo Lite II
Industrial Torch
Power Torch
• Piezo Waterproof/ Windproof
• Self igniting Piezo electric ignition
• Self contained, metal fuel tank
• Adjustable blue flame, tempera-
• Brass and Steel construction
• Dual gas and air flame controls
• Up to 2500°F(1300°C) Torch output
• Safety Lock feature to
• Kit contains: unit, solder tip, heat tip,
• Removable base for hands free
• Built in window indicates fuel level
• 10.3" (260mm) long
• Operating time 120 minutes on
Ignition System
• Twist flame adjustment
• Refillable translucent fuel tank
• Pinpoint flame of 2400°F(1315°C)
ture up to 2500 ºF(1300 ºC)
• Safety lock prevents unintentional
ignition for storage
• Approximate run time
30 minutes
Soldering Irons
shrink attachment, spanner and open
end wrench, sponge and stand packed
in metal storage carrying case
• Built in fuel filter for consistent
fuel ignition
prevent accidents
operation in both vertical and
horizontal position
• Approximately run time up to
220 minutes on one tank
1 fl. oz tank
• Solder tip temperature: 482ºF(250ºC)
to 932ºF(500ºC)
• Heat tip temperature: 1202ºF(650C)
94900
GT-70
94600
UT-100SIK
Item Number
Description
Dimensions in " (mm) LxWxH
Price
94900
Turbo Lite II
1.4(35) x .8(20) x 2.8(2.8)
$21.80
GT-70
General Industrial Torch
6.5(165.1) x 5(127) x 1.8(45.72)
$54.00
94600
Butane Power Torch
3.9(100) x 1.4(36) x 5.4(138)
UT-100SIK
Ultratorch professional soldering tool kit
$113.96
$133.00
Images are representative of products listed and may not be actual product.
260
www.wardsmarine.com
Tools
HEAT TOOLS
Iron Accessories
• Iron tips feature leading edge combustion
chamber exhaust port design
• Copper based iron tips are manufactured
using patented process which produces a
uniform iron and chrome plating thickness
• All tips are pre-tinned
70-01-02
70-01-16
70-01-05
70-01-52
70-01-08
Item Number
Description
Price
70-01-02
3.3mm diameter chisel soldering tip (standard)
$15.81
70-01-05
.5mm diameter tapered needle soldering tip
$15.81
70-01-08
2mm diameter 35˚ spade soldering tip
$15.81
70-01-52
5.7 O.D/ 4.9 I.D mm heat tip (standard)
$15.81
70-01-16
Hot knife tip
$21.13
Torch Accessories
• Triple refined formula reduces clogging of filters
• Special vapor pressure promotes consistent ignition
• Contains no CFC’s
• Recommended refill for all Ultratorch & Master
butane powered products
BUTANE
Item Number
Description
Price
Butane
Both sizes include canister with universal tip adapter
10448
Ultratane butane 5-1/8 oz. $4.69
51773
Ultratane butane 15/16 oz. $5.85
Burners
80-04U
Burner for UT 100 & UT100SI
$28.75
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
261
Tools
INSULATED HAND TOOLS
CRIMPERS
Klein
Screwdrivers
Cutting Pliers
• 1000V Rated
• Durable, two layer, molded insulation
• E xceeds the IEC 609000 and ASTM F1505
• Flame retardant, impact
•C
learly marked for 1000 Volt
•T
wo Layers of insulation provides
• Rivet is closer to the edge
standards, for insulated tools
to meet or exceed all ASTM and IEC
standards for insulated tools
• Cushion grip handle for greater torque
protection against electrical shock
and comfort for easy access
•T
hick, tough high dielectric white
• Custom US made tool steel
inner coating
603-7-INS
resistant, outer coating
for 36% greater cutting power
• Integral guards help
prevent hand contact with
conductive parts
602-8-INS
Item Number
Tip Type
603-7-INS
#2 Phillips
D2000-48-INS
Length In "
Hand Style
Price
7
Round Shank
$30.02
5/16" Cabinet
7
Round Shank
$30.92
Jaw Width In "
Jaw Length In "
Screwdrivers
602-7-INS
Item Number
Overall Length In "
Price
Cutting Pliers
D2000-48-INS1-3/16
13/16
8-1/4
$90.50
Terminal
• Interchangeable dies change quickly
and easily with screwdriver
• Built in locator
• Cushioned comfort grip handles
• Crimp Size 22AWG-18AWG
(Insulated)
30-479
Item Number
Description
Price
30-479
Crimpmaster Insulated Terminal Crimp
$116.39
• Crimp size 22 AWG -10 AWG
• For use with insulated terminals and splices
58433-3
Item Number
Description
Price
58433-3Pro-crimper
$145.70
Images are representative of products listed and may not be actual product.
262
www.wardsmarine.com
Tools
CRIMPERS
SUBHEAD
Terminal (Continued)
• Fits wire sizes 8 AWG to 4/0 AWG
• ROTO CRIMP hand tool for uninsulated
terminals and splices
600850
Item Number
Description
600850
Large rotocrimp
• Two rotating crimping dies held together with
spring loaded indexing pins
• Used to apply SOLISTRAND and CABLE MARKER
terminals to stranded copper wire.
Price
$1,304.05
• Do not use these tools on aircraft
applications or on aluminum wire
terminations
• Can us on wire sizes 8AWG to 1/0
601075
Item Number
Description
601075
Bantam rotocrimp
Price
$1721.95
• AMP open barrel service tool for stamped contacts
and D Sub contacts
• Includes opening for crimping insulated terminals
and cutters for machine screws
• Crimps Double-D high density miniature contacts
30-426
Item Number
Description
30-426
Crimper Service tool
Price
$73.17
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
263
Tools
SUBHEAD
CRIMPERS
Terminal (Continued)
• 4 Crimp nests 8AWG, 12-10 AWG, 16-14 AWG, and 22-18 AWG
• Mating Mechanism prevents the jaws from slipping or misalignment
• Long handles make it easier to crimp
• Easy to use and understand release mechanism
• Ergonomic design to initiate the crimp process
T-R-50
Item Number
Description
T-R-50
Terminal crimper, 22-8 AWG range
Price
• Crimping die marked for insulated and non-insulated
• Hot-riveted joint for smooth action
• Tapered nose design for working in confined spaces.
• Specially hardened wire cutter in nose.
• Crimps size: 10-22 AWG
• Overall length 9-3/4" (248 mm)
solderless terminals and connectors.
and no handle wobble
1005
Item Number
Description
1005
Crimping/Cutting tool Non Insulated/ Insulated Terminals
Price
• Designed for crimping non-insulated solderless
• Plastic dipped cushioned handles
• Specially hardened wire cutter in nose.
• Tapered nose for working in confined spaces.
• Crimps 10-22 AWG
• Overall length 9-3/4" (248mm)
terminals and connectors.
$60.05
$39.42
for comfort.
1006
Item Number
Description
1006
Crimping/Cutting Tool Non Insulated Terminals
Price
$40.72
Ferrule
• Crimping tool with ratchet mechanism
• Insulated and uninsulated ferrules: 22AWG to 10 AWG
• Twin wire ferrules: 2 x 22AWG to 2 x 14AWG
FD2410N
Item Number
Description
FD2410N
Trapezoidal Ferrule Crimper
Price
$98.00
Images are representative of products listed and may not be actual product.
264
www.wardsmarine.com
Tools
SUBHEAD
CRIMPERS
SUBHEAD
CUTTERS
Ferrule (continued)
• Crimping tool with ratcheting mechanism
• Insulated and uninsulated ferrules: 26AWG to 10AWG
• Twin wire ferrules: 2 x 22AWG to 2 x 14AWG
FD2810SQ
Item Number
Description
FD2810SQ
Square Ferrule Crimper
Price
$118.00
Deutsch
• Crimps a wide range of contact sizes with
no need to change out dies or locators.
• Provides symmetrical four indent crimp.
• Compact and easy to use for field service.
HDT-48-00
Item Number
Description
HDT-48-00
Hand crimping tool, for Deutsch connectors Price
$373.94
Cable
• Shear type hook jaws grab and hold cable while
• 350 copper, 350 aluminum MCM
• Beveled tips for positive mating.
• Hinge bolt with pin set nut for proper blade tension
• 16-3/4" (425mm)
shear cutting action makes clean cuts.
cable cutting capacity.
63035
Item Number
Description
63035
Utility cable cutter
Price
$107.54
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
265
Tools
SUBHEAD
CUTTERS
Cable (continued)
• Precise, one hand shearing action cuts 24 AWG copper,
• Heat treated high carbon steel shearing
• Special shear angle cuts cleanly without compression
• Not designed for cutting steel or ACSR.
aluminum multi strand cable and wire.
edges for long life.
to cable geometry for telecom work.
63055
Item Number
Description
63055
Compact cable cutter
Price
$51.44
• Cleanly cuts copper up to 400 MCM, as as alumi-
• Hold action spring speeds
• Unique ratchet action holds cable tight and
• Not designed for cutting steel
num and multi conductor cables up to 600 MCM.
allows rapid, straight cuts with minimum effort.
cutting action.
or ACSR.
63060
Item Number
Description
63060
Ratchet cable cutter
• Cuts up to 4/0 aluminum AWG (no ACSR),
2/0 AWG soft copper and 100-pair 24 AWG
communications cable.
• High leverage for greater cutting power.
Price
$334.46
• Precision, one hand shearing action.
• Overall length: 9-9/16"(243mm)
• Not designed for cutting steel or ACSR
J63050
Item Number
Description
Price
J63050
High leverage cutting pliers standard
$49.46
Pliers
• Induction hardened cutting knives for long life.
• Hot riveted joint ensures smooth action and no
handle wobble.
• Overall length: 6-1/8"(156mm), Jaw length:
13/16"(21mm)
• Semi flush cutting knives
• Short jaws and beveled cutting edges permit
close cutting of wire
D202-6
Item Number
Description
Price
D202-6
Standard diagonal, with tapered nose
$33.80
Images are representative of products listed and may not be actual product.
266
www.wardsmarine.com
Tools
CUTTERS
Pliers (continued)
• Sharp pointed nose for precise tip cutting
and trimming
• Spring loaded for self-opening action
• Jaw length: 11/16”, jaw width 9/16”
• Overall length: 5-1/16”
• Semi flush cutting knives
• Plastic dipped handle
D209-5C
Item Number
Description
D209-5C
5" Electronics midget diagonal cutting pliers • Precisely cuts injection mold sprues, gates, and
• Overall length: 7-11/16"(195mm)
• Adjustable 1/16" hollow head screw keeps knife edge
• Flush cutting knives
• Great for Ty Wraps
other plastics.
from damaging each other (not for use on metal)
• Spring loaded self opening action
Description
D227-7C
Plastic cutting pliers
• Rivet is closer to the cutting edge for 36% greater
• Hot riveted joint ensures smooth action
• Short jaws and beveled cutting edges permit close
• Overall length 8-1/8"(206mm), Jaw length:
cutting of wire.
$37.26
Jaw length: 1"(25mm)
Item Number
cutting and gripping power than other plier designs.
Price
D227-7C
Price
$62.88
and no handle wobble.
13/16"(21mm)
• Induction hardened cutting knives for long life.
J2000-28
Item Number
Description
J2000-28
High leverage diagonal cutting pliers • Angled head design for easy work in confined spaces.
• High leverage design. Rivet is closer to the cutting
• Induction hardened cutting knives.
• Hot riveted joint ensures smooth action and
• Short jaws and beveled cutting edge permit close
• Overall length: 8-1/8"(206mm), Jaw length:
edge for 36% greater cutting and gripping power.
cutting of wire.
Price
$51.32
no handle wobble.
13/16"(21mm).
Item Number
Description
J2000-48
High leverage diagonal cutting pliers with angled head
J2000-48
HDT-48-00
Price
$53.62
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
267
Tools
SUBHEAD
STRIPPERS
Strippers
• Wire looping and bending holes.
• Precision ground stripping holes.
• Black oxide finish resists corrosion.
• Easy to read wire gauge marking on both sides.
• Do not use for cutting steel wire or bolts.
• Overall length: 6-1/4"(159mm)
• Strips and cuts 8-18 AWG solid wire.
11049
Item Number
Description
11049
Klein Standard Wire Stripper/Cutter
• Precision shear type blades for clean
cuts on solid and stranded copper wire.
• Easy to read markings on both sides.
• Precision ground stripping holes.
Price
$18.36
• Screw shearing holes.
• Overall length: 7-1/8"(181mm)
• Can cut wire 10-18 AWG solid & 12-20
AWG stranded.
11055
Item Number
Description
Price
11055
Klein Kurve Wire Stripper/Cutter
$26.00
®
• Form ground hardened knife type blades.
• Built in wire cutter & wire looping holes.
• Laser etched wire gauge markings.
• Corrosion resistant, black oxide finish.
• Can strip 14-24 AWG solid wire &
16-26 AWG stranded wire.
45-121
Item Number
Description
45-121
T Stripper Wire Stripper
Price
$14.66
• Wire gripper holds wire centered in stripping hole.
• Cleanly strips wire up to full 7/8" (.22mm)
• Eliminates nicking, cutting, and fraying of
commercial wire.
• Can strip 10-22 AWG
45-292
Item Number
Description
45-292
Stripmaster Wire Stripper Price
$41.95
Images are representative of products listed and may not be actual product.
268
www.wardsmarine.com
Tools
EXTRACTION
SUBHEAD MULTI
SUBHEAD
TOOLS
Extraction Tools
• For use with Deutsch Terminals and Devices
DEUTSCH
Item Number
Description
Price
Deutsch
0411-240-2005
Removal tool size 20 red
$3.08
0411-291-1405
Removal tool size 14 green
$3.90
0411-310-1605
Removal tool size 16 blue
$3.60
114008
Removal tool size 8 green
$4.80
114009
Removal tool size 4 white
$6.54
114010
Removal tool size 12 yellow
$4.26
Multi Tools
• Crimp 10-22 AWG insulated and non insulated terminals
• Stainless steel blade resists
• Cut and strip 8-22 AWG solid and 10-24 AWG stranded wire.
• Cut and rethread 4-40, 5-40, 6-32,8-32, 10-24, 10-32 screws.
• Precision ground plier nose.
and coaxial connectors.
corrosion and nicking.
701009
Item Number
Description
701009
Stainless Steel Cut/Strip/Crimp Tool
Price
$32.30
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
269
Tools
SUBHEAD
MULTI
TOOLS SUBHEAD
CABLE TIE
Multi Tools (Continued)
• Two wire cutters-one at tip a second one halfway back near
stripping holes.
Cleanly shears bolts size: 4-40, 6-32, 8-32, 10-24, 10-32
•
• Crimping dies color coded for easy identification.
• Crimps 7-8 mm insulated and non-insulated terminals,
lugs, and splices.
• Pivot nut adjusts tension.
• Wire cutter in nose and below pivot.
• Strips and cuts 10-26 AWG stranded &
8-22 AWG solid.
• Overall length: 8-1/2"(216mm)
KL-1001
Item Number
Description
Price
1001
Klein Multi Purpose Electrician’s Tool
$32.86
Cable Tie Tools
• Consistent, positive tension.
• Flush cut-off leaves no projections to
damage nearby wires or components.
FD600A
Item Number
Description
FD600A
Standard Economy Model
• Used with standard, light-heavy, heavy and extra-heavy
cross section Pan-Steel type MLT ties, type MLTC/MLTFC
coated ties, and type MLTDH double wrapped ties.
• Cable tie side entry for immediate positioning of tie.
• One hand operation, lightweight.
Price
$38.00
• Tool tension is controlled by
installer, twist action cutters.
• Rugged, lightweight, easy to
operate pliers type tool.
ST2MT
Item Number
Description
ST2MT
Stainless Steel Model
Price
$285.20
Images are representative of products listed and may not be actual product.
270
www.wardsmarine.com
Tools
SCREWDRIVERS
SUBHEAD
Klein
• Patented Tip-Indent quickly identifies the type
• Integrated screwdriver/nut driver shaft
• Premium chrome plated.
• Internal flanges inside handle provide solid,
• Interchangeable blade for quick and easy
of screwdriver and screwdriver tip orientation.
twist resistant blade anchor.
holds 8 popular tips and converts to 3
nut driver sizes.
switch out.
• Industrial strength, heat tread bits.
32500
Item Number
Description
32500
11-in-1 Screwdriver/Nut Driver
Price
$23.00
• General purpose selection of the most frequently
used screwdrivers.
• Set includes: three cabinet tip, two phillips tip,
and two keystone tip styles with case.
85076
Item Number
Description
85076
7 piece cushion grip set
• Patented Tip-Indent quickly identifies the type
• Premium chrome plated shafts for
• Precision tip for an exact fit.
• Set includes Three cabinet sizes,
of screwdriver and tip orientation.
Price
$78.02
corrosion resistance.
and One Phillips size.
85484
Item Number
Description
85484
4 piece mini cushion grip set
Price
$32.06
Phoenix
• Also suitable for use as a screwdriver: Phillips
• .6 x 3.5 x 100 mm HxWxL
• Two component grip with non slip.
SZF-1
Item Number
Description
SZF-1
Acuation tool for ST terminal blocks
Price
$17.51
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
271
Tools
SUBHEAD
SAWS
AND BITS
Hole Saw Kits
• Includes most frequently used sizes and an
• Set contains:
arbor extension for hard to reach spots
Hole Saws: 3/4" thru 2-1/2"
(1/8" to 1/4" increments)
Arbors: 1/4" & 7/16" Arbor Extender: 12"
• All components are packed in a rust-proof,
molded plastic carrying case
31635
Item Number
Description
31635
Journeyman’s 13 piece set
Price
$188.20
Unibit Step-Drill Bits
• Single fluted design eliminates skidding and
• Drill multiple size holes in thin sections of
• Anti skid tip eliminates the need for center
• Laser etched hole sizes are easy to read
makes for easier resharpening.
punching or pilot hold drilling for most sizes
metal, plastic, and wood using a single bit.
and permanent
59003
59002
59004
59001
59005
UNIBITS
Item Number
No. of hole
sizes per bit
Size Range Pilot Hole Required
(Hole Diameter in ")
Electric Drill Size
Depth Penetration
(per step in ")
(in ")
Price
* No of hole sizes per bit in inch increments
59001
13 in 1/32" 1/8 - 1/2 no 1/4" and larger 1/8 $34.44
59002
8 in 1/16" 9/16 - 1 yes, 1/2" larger 1/2" and larger 1/8
$68.04
59003
9 in 1/16" 1/4 - 3/4
no 3/8" and larger 1/8
$58.46
59004
10 in 1/16" 13/16 - 1-3/8 yes, 3/4" or larger 1/2" and larger 1/8
$138.22
59005
6 in 1/16" 3/16 - 1/2 no 1/4" and larger 3/8
$34.44
Images are representative of products listed and may not be actual product.
272
www.wardsmarine.com
Tools
TOOL
SUBHEAD
BAGS
Small Storage
5139
5139B
Item Number
Description
Price
5139
Canvas zipper bag, 12-1/2" length
$12.74
5139B
Ballistic nylon zipper bag, 12-1/2" length
$13.14
Large Storage
Electrician’s Bag
Back Pack
• Tough durable molded bottom protects
• Wide opening fits power drills, meters,
• 1680d ballistic weave for durability
• 55417-18 includes removable pockets
• Tough durable molded bottom protects
from the elements
for easy access
flashlights, etc.
from the elements
• Large front pocket easily fits fish tapes
55417-18
Item Number
55418-19
Exterior Pockets
Interior Pockets
55421-BP
Dimensions in "(mm) LxWxH
Price
Tradesman Pro Electrician’s Bag
55417-18
25
53
19(482.6) x 6.5(165.1) x 16(406.6)
$140.00
55418-19
53
2
17.5(444.5) x 10(254) x 14(355.6)
$122.00
14(355.6) x 7(177.8) x 18(457.2)
$109.00
55421-BP
Tradesman Pro Backpack
5
34
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
273