www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Test & Measurement
Multimeters - contents
91 Bench Power Supplies
92 Lab Equipment,
Environmental Monitoring &
Calibration
93 Network, Cable & Electrical
Testing
94 Inspection & Mechanical
Measurement
95
2308
OM = Order Multiple
2172
2182
2239
2283
96 Oscilloscopes
2340
Handheld Digital Multimeters
2310
2310
Bench Multimeters
2326
97 Logic Analysers & Signal
Generation
2353
Analogue Multimeters
2331
98 Test Leads & Accessories
2361
Multimeter Adaptors
2332
Test Leads
2333
Multimeter Accessories
2336
www.nguyenxuong.com
Fluke Digital Multimeters
Solutions for every need
No other digital multimeters measure up to Fluke for quality and value. No matter what kind of work you do,
Fluke makes a range of meters to give you the maximum performance you need.
After building and improving them for more than 50 years,
Fluke is the world’s most trusted name in meters.
Discover the full range of Fluke Digital Multimeters at RS Components.
©2012 Fluke Corporation.
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
IDM 5 Pocket Multimeter with
non contact Voltage Detector
ISO-TECH
ISO-TECH IDM 17 Probe Style
Multimeter
Clear 3200 count LCD display with 65 segment bargraph and annunicators.
In addition to an exceptional technical specification, this unique pen style multimeter offers a level of
safety normally only found on larger hand-held multimeters.
The ICA 15 a.c. current adaptor, available separately, is specifically designed to plug into the IDM 17
multimeter (rs 697-4070)
IDM 17
Auto/Manual ranging
Mains proof Ω/continuity ranges
Fast continuity bleeper <50Ω
Display hold function
Diode test
Auto power off
Uses standard ’AAA’ sized alkaline batteries (supplied fitted)
Standard 3⁄4 in. pitch input jacks
Rugged construction with high impact thermoplastic case
Designed to meet IEC 1010-1 (safety standard)
Installation category III 300V
Installation category II 600V
Fused lead with screw in crocodile clip is available separately to meet HSE GS38 recommendations
for use on power circuitry (stock no. 816-029)
ICA 15 Current Clamp Adaptor
AC adaptor designed to plug into the IDM17 multimeter
Up to 29mm dia. conductor
Output voltage 1mV a.c. per 0.1A a.c.
Designed to meet IEC 1010-1 (safety standard) installation category II 600V
Note: For calibrated combination of the IDM 17 multimeter and ICA 15 current adaptor see ISO - TECH
IEK 10 kit (stock no. 186-2405).
Supplied with: Test leads, test probe, alkaline batteries and carry pouch.
Note: Colour may differ from that shown.
IDM 17
±0.7 %
+2 D
330 mV
600 V
100 mV
±1.7 %
+2 D
3V
600 V
1 mV
500 Hz
±1 %
+2 D
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
Description
Stock no.
S697-4070
697-3935
IDM17
ICA15
Price per
unit
unit
OM
S$
1+
1+
91·00
64·00
ICA 15
± (1.9% +0.5A)
0.1A
300A
60Hz
S$
697-3929
Price per
unit
95
2310
OM = Order Multiple
OM
S$
1+
47·50
S$
1+
55·00
S$
S$
± (0.5% rdg + 2d)
200mV
1000V
100μV
± (1.5 + 5d)
200mV
750V
AC Voltage Lowest Range Resolution
Resistance Accuracy
Resistance Lowest Range
Resistance Highest Range
Resistance Lowest Range Resolution
Dimensions & weight
Price per
unit
OM
S$
1+
78·00
S$
100μV
± (0.7 % rdg + 2d)
200Ω
20MΩ
100mΩ
156 x 74 x 44mm; 320g
S$
IDM62T Pocket Multimeter
with Non-Contact Voltage
Detector
S$
3.4 V
600 V
1 mV
± (2.0 % rdg + 4d)
S$
unit
OM
Compact design with soft rubber side grips
2000 counts LCD display
6 functions/ 14 ranges
1000V ac/dc measurement range
Integral non-contact AC voltage detector with visual & audible indication
(50Vac to 600Vac, 50 to 500Hz)
Resistance/ Continuity and Diode Test
Full autoranging with manual override
Display hold
Auto power-off
Conforms to EN61010-1 (safety rating) CAT III 600V, CAT II 1000V
Note: Colour may differ from that shown.
Supplied with: 2 x AA alkaline batteries, users instructions & test leads.
Compact design with soft rubber side grips
2000 counts LCD display
11 functions/ 32 ranges
750V ac/dc measurement range
10A ac/dc measurement range
Integral non-contact AC voltage detector with visual & audible indication
(50Vac to 600Vac, 50 to 500Hz)
-20 °C to 800 °C type K temperature measurement input & sensor
20MHz frequency counter
2mF capacitance range
Resistance/ Continuity and Diode Test
Full autoranging with manual override
MIN/Max & Display HOLD
Auto–power off
Conforms to EN61010-1 (safety rating) CAT III 600V, CAT II 1000V
Supplied with: 2 x AA batteries, users instructions, test leads, type K thermocouple adaptor and type
K bead sensor
Note: Colour may differ from that shown.
DC Voltage Accuracy
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
Resistance Accuracy
Price per
IDM61 Pocket Multimeter with
Non-Contact Voltage Detector
697-4023
Resistance Lowest Range 340Ω Resistance Lowest Range Resolution 100mΩ
Resistance Highest Range 34MΩ Dimensions & weight
125 x 60 x 22mm; 110g
Stock no.
697-4061
Stock no.
Compact slim line design
3400 counts LCD display with bargraph
5 functions/16 ranges
600V ac/dc measurement range
Selectable manual/autoranging
Resistance/Continuity and Diode Test
Display hold
Integral test probes stow away neatly behind hinged back panel
Auto–power off
Conforms to EN61010-1 (safety rating) CAT III 300V, CAT II 600V
Note: Colour may differ from that shown.
Supplied with: 2 x LR 44 1.5V coin cells (fitted), instructions & integral test
leads.
± (2.0 % rdg + 2d)
340 mV
600 V
1 μV
± (4.0 % rdg + 5d)
Stock no.
DC Voltage Accuracy
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Range Resolution
AC Voltage Accuracy (50 to 500 Hz)
AC Voltage Lowest Range
AC Voltage Highest Range
IDM19 Pocket Multimeter
DC Voltage Accuracy
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
Compact slim line multimeter in deluxe leather wallet
4000 counts LCD display
8 functions/ 30 ranges
600V & μA ac/dc measurement ranges
Volt Sense - integral non-contact AC voltage detector with visual & audible
indication
Resistance/Continuity and Diode Test
Capacitance, Frequency counter & duty cycle
Selectable manual /autoranging
Display HOLD
Auto–power off
Conforms to EN61010-1 (safety rating) CAT III 300V, CAT II 600V
Dimensions & weight (with wallet) :135mm x 90mm x 18mm; 135g
Note: Colour may differ from that shown.
Supplied with: 2 off LR44 button cells, users instructions, integral test leads & leather wallet
Function
Measuring Ranges
Basic accuracy
Range resolution
±0.6%
100 μV → 1 V
DC Voltage
400 mV → 600 V
±0.9%
100 μV → 1 V
AC Voltage
400 mV → 600 V
DC Current
400 μA → 4000 μA
±0.9%
0.1μA → 1 μA
±1.5%
0.1μA → 1 μA
AC Current
400 μA → 4000 μA
±0.9%
100 MΩ → 10 kΩ
Resistance
400 Ω → 40 MΩ
Capacitance
40 nF → 400 μF
±2.9%
10 pF → 0.1μF
±0.3%
0.01Hz → 10Hz
Frequency
40 Hz → 4 MHz
S$
± (0.5% rdg + 2d)
DC Voltage Lowest Range 200 mV
DC Voltage Highest Range 1000 V
DC Voltage Lowest Range 100 μV
Resolution
AC Voltage Accuracy (50 ± (1.5% rdg +5d)
to 500 Hz)
AC Voltage Lowest Range 200 mV
AC Voltage Highest Range 750 V
AC Voltage Lowest Range 100 μV
Resolution
DC Current Accuracy
± (1.0% rdg +3d)
DC Current Lowest Range 2 A
DC Current Highest Range 10 A
DC Current Lowest Range 1 mA
Resolution
AC Current Accuracy (50 ± (1.5% rdg
to 500 Hz)
+5d)
AC Current Lowest Range 2 A
AC Current Highest Range 10 A
AC Current Lowest Range 1 mA
Resolution
Resistance Accuracy
± (0.7 % rdg +
2d)
Resistance Lowest Range 200 Ω
Resistance Highest Range 20 MΩ
Resistance Lowest Range 100 mΩ
Resolution
Dimensions & weight
156 x 74 x
44mm; 320g
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Stock no.
697-4027
Multimeters
Price per
OM
unit
S$
S$
S$
1+ 133·90
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
+5 D
600mV
750V
0.1mV
500Hz
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
Resistance Lowest Range
Resistance Highest Range
IDM63N Pocket Multimeter
800 hour battery life
Measures ac/dc voltage, resistance, continuity and diode test
3200 count 12mm high LCD display with analogue bargraph
Full Autoranging with manual override
Display hold function
Conforms to IEC1010-1 600V category III
Note: Colour may differ from that shown.
Supplied with: Protective rubber holster, test lead set, 2 alkaline AAA batteries
and instruction manual.
Description
S697-4036
Price per
OM
unit
S$
Description
IDM73 software & RS232 cable
S$
S$
A compact instrument with improved display resolution designed to meet
IEC1010 -1 safety standard category II 600V with 10A measuring capability.
3200 count LCD display with range annunicators
65 segment analogue bargraph
Display hold function
Continuity bleeper (0.2ms)
Measures ac/dc voltage and current, resistance, continuity and diode tests
Autoranging voltage, ohms and continuity with manual override
Beep guard audible warning when current measurement and current
ranges is not selected
Versatile rubber holster with probe storage allowing single handed use of
the instrument
Auto power off conserves battery life
S697-4039
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
Price per
OM
unit
S$
±1.0 %
+2 D
300 μA
10 A
0.1μA
±1.7 %
+4 D
300 μA
10 A
0.1 μA
500Hz
±1 %
+4 D
S$
S$
1+ 120·50
ISO-TECH 70 Series Compact
Multimeters CAT. IV
IDM71
Large scale display
6000 display count
DCA μA
Data Hold
Min/ Max function
Frequency Counter
Capacitance Measurement
Auto Power Off
Shock resistant (1m drop)
Protective Holster with tilt stand and lead storage
IDM72 additional features
True RMS reading on AC mode
DCA μA, A
ACA A (True rms)
IDM73 additional features
Backlit, Large scale display
True RMS reading on AC mode
DCA μA, A
ACA A (True rms)
Optional RS-232 interface and software
Note: Colour may differ from that shown.
Standards: CAT. IV 600V/ CAT. III 1000V
Supplied with: Test leads, protective holster, 2x1.5V Alkaline type AAA batteries (installed) and
manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
±0.5%
+2 D
600mV
1000V
0.1mV
±0.9%
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
1+
1+
1+
142·00
158·00
200·00
Stock no.
Price
per
OM
S$
460-9881
unit
1+
23·90
S$
S$
S$
S$
This enhanced version of the popular IDM 91 multimeter has
the following safety features:
Fuse protection on both 200mA and 10A current ranges
Beep guard system warns when probes are incorrectly inserted
Designed to meet IEC 1010-1 (Safety Standard) installation category II 600V,
pollution degree II
Other key features of the IDM 91E include:
Large 20mm digit high contrast display
2000 display count
Water resistant via O ring sealed case
Diode test and continuity bleeper
Auto power off
Note: Colour may differ from that shown.
Supplied with: fitted alkaline battery, protective holster, lead set and
instruction manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Supplied with: Holster, test lead set, 2xAA batteries (fitted) and instruction manual.
Note: Colour may differ from that shown.
Stock no.
S$
ISO-TECH IDM 91E Multimeter
1+ 107·00
±0.7 %
+2 D
300 mV
600 V
100 mV
±1.7 %
+5 D
3V
600 V
1 mV
500 Hz
unit
unit
unit
OM
Accessories
ISO-TECH IDM 67 Pocket
Multimeter
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Price per
S697-4033
S697-4042
S697-4045
IDM71
IDM72
IDM73
DC voltage Accuracy
±(0.5% rdg +2 dgts)DC current Accuracy
±(1% rdg +2 dgts)
DC voltage Lowest Range 300.0 mV
DC current Lowest Range 300.0 μA
DC voltage Highest Range 600V
DC current Highest Range 3000 μA
DC current best Resolution 0.1 μA
DC voltage best Resolution 100 μV
AC voltage Accuracy
±(1.5% rdg +5 dgts)Resistance Accuracy
±(0.8% rdg +2 dgts)
AC voltage Lowest Range 3.000 V
Resistance Lowest Range 300 Ω
AC voltage Highest Range 600 V
Resistance Highest Range 30 MΩ
AC voltage best Resolution 1 mV
Resistance best Resolution 0.1Ω
AC voltage Max Frequency 500 Hz
Diode Check & Continuity 3.3V o/c, 1.5mA
max
Stock no.
Stock no.
+5 D
600μA
6000μA / 10A
0.1μA
500Hz
±0.7%
+2 D
600Ω
60MΩ
±1%
+2 D
600μA
6000μA / 10A
0.1μA
±1.5%
Stock no.
S697-4049
±0.5%
+1 D
200mV
600V
100mV
±1.25%
+4 D
200mV
600V
100μV
500Hz
Price per
unit
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
OM
S$
1+
139·50
±1%
+1 D
200μA
10A
0.1μA
±1.5%
+3 D
200μA
10A
0.1μA
500Hz
±0.75%
+1 D
S$
S$
ISO-TECH IDM 93N
Fully fuse protected instrument which meets the latest IEC1010
-1(safety standards) installation category III 300V, installation category II 600V.
Shockproof (5 feet)
Auto power off
Resistance continuity beeper & diode test
Capacitance to 200μF
200kHz frequency counter
Large 20mm digit contrast display
2000 display count
Note: Colour may differ from that shown.
Supplied with: fitted alkaline battery, protective holster, lead set, and
instruction manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Stock no.
S697-4058
±0.5%
+1 D
200mV
600V
100μV
±1.3%
+4 D
200mV
600V
100μV
500Hz
Price per
unit
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
OM
S$
±1%
+1 D
200μA
10A
0.1μA
±1.5%
+3 D
200μA
10A
0.1μA
500Hz
±0.8%
+4 D
S$
S$
1+ 173·50
My Account
www.rssingapore.com
Visit our website for additional price information and exciting promotions
95
2311
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
IDM 97-II & IDM 99-II
Multimeters
IDM103/105/106 Multimeters
Three high specification instruments with 4000 count display
and 42 segment bargraph.
All feature:
10A (continuous) current range
Data hold/relative modes
1MHz counter with full 9999 count display
Diode test and continuity sounder
4nF to 40μF capacitance ranges
Mains proof resistance ranges
Full autoranging with manual override
Auto power shutdown
Digital display update rate 2 per second
Bargraph display update rate 20 per second
Fused 400mA and 10A ranges
Dust and water protected to IP64
Water resistant via O ring sealed case
Dual high energy fuse protection
106 Features
AC - Coupled AC conversion true rms responding to the rms sine wave input
Note: Max./Min. hold function and Memory store/recall only available to 105N (697-4005) and 106N
(697-4014)
Supplied with: protective holster with probe storage, lead set, batteries and instruction manual.
Large digit LCD display with annunciators
Resistance, audible continuity & diode test
Frequency & rpm counter
Frequency display (Hz) on a.c mode
Display hold
30 minute auto power off
Separate battery compartment avoids breaking calibration seal
Complies with EN61010-1 (Safety Standard) CAT III 600V; CAT II 1000V
IDM97-II features
70 segment analogue arc bargraph
3400 display count
IDM99-II features
82 segment analogue arc bargraph
True rms measurment
40000μF capacitance measurement
Display backlight
-20°C → +800°C type K temperature measurement input & sensor
Min/Max & relative measurement
Peak hold & data hold
4000 display count
Models supplied with protective holster, ATL1 test lead set with 2 crocodile clips, battery &
instruction manual. Type K thermocouple adaptor and type K bead sensor (IDM99-II only).
Note: Colour may differ from that shown.
Measurement
DC Voltage Range
DC Voltage Accuracy
AC Voltage Range
AC Voltage Accuracy
AC Voltage Max Frequency
DC Current Range
DC Current Accuracy
AC Current Range
AC Current Accuracy
AC Current Max Frequency
Resistance Range
Resistance Accuracy
Capacitance Range
Capacitance Accuracy
Frequency
Frequency Accuracy
Description
IDM97-II
IDM99-II
IDM 97II
300.0mV → 1000V
± 0.25%
3.000V → 750V
± 1.3%
1 kHz
30.00mA → 10A
± 1.5%
30.00mA → 10A
± 2.0%
1kHz
300.0Ω→ 30MΩ
± 0.7%
3000 Hz → 30MHz
± 0.01%
Stock no.
S697-4051
S697-4055
Price per
unit
unit
IDM 99II
400.0mV → 1000V
± 0.25%
400.0 mV → 750V
± 1.3%
1 kHz
40.00mA → 10A
± 0.7%
40.00mA → 10A
± 2.0%
1kHz
400.0Ω → 40MΩ
± 0.7%
4.000 nF → 40 mF
± 0.2%
4000 Hz → 40MHz
± 0.01%
OM
S$
1+
1+
200·00
250·00
S$
S$
IDM 101 Multimeter
Description
A 4000 count autoranging multimeter with high speed 42
segment arc shaped bargraph which meets IEC 1010-1
(safety standards) installation category III 600V, category II
1000V.
Max./Min. hold function
Memory store/recall
Data hold/relative modes
Continuity sounder <40Ω threshold
Frequency counter with full 9999 display count and 5
ranges; 1-100Hz, 1kHz, 10kHz, 100kHz and 1MHz
Mains proof resistance ranges with diode test
Full autoranging with manual override
Battery life 1000 hours with auto shutdown
Digital display update rate 2 per second
Bargraph display update rate 20 per second
Fused 400mA and 10A ranges
High quality impact proof case
Note: Colour may differ from that shown.
Supplied with: protective holster, lead set, battery and instruction manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Product Description
IDM101
+ UKAS Cal.
95
2312
±0.7%
+2 D
400mV
600V
0.1mV
±1%
+5 D
4V
600V
1μV
60Hz
Stock no.
S697-4008
S422-573
Price per
unit
unit
S$
1+
1+
215·00
455·00
www.rssingapore.com
OM = Order Multiple
IDM103N
IDM105N
IDM106N
Stock no.
S697-4001
S697-4005
S697-4014
Price per
unit
unit
unit
IDM105N/106N
±0.1%
+2 D
400mV
1000V
0.1mV
±1%
+5 D
400mV
750 V
0.1mV
1kHz
±0.4%
+2 D
4mA
10A
1μA
±0.6%
+5 D
40mA
10A
1μ
1kHz
±0.4 %
+2 D
OM
S$
1+
1+
1+
275·00
295·00
315·00
S$
S$
IDM303 & 305 Triple Display
True RMS with RS-232 Option
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
Resistance Lowest Range
Resistance Highest Range
OM
IDM103N
±0.25%
+2 D
400 mV
1000 V
0.1 mV
±1 %
+5 D
4V
750 V
0.1mV
1kHz
±0.75 %
+2 D
4mA
10A
1μA
±1.5%
+5 D
40mA
10A
10μA
1kHz
±0.75 %
+2 D
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
±0.8%
+2 D
4mA
10A
1μA
±1.5%
+5 D
4mA
10A
1μA
1kHz
±2%
+5 D
400Ω
40MΩ
S$
S$
Two high accuracy, triple display multimeters with analogue arc bargraph
display.
Selectable 40000 / 4000 display resolution
Large format triple display with electroluminescent backlight
80 segment bargraph with zoom and centre zero options
Fully autoranging on 12 functions
True RMS (a.c., a.c.+d.c.) measurement. Crest factor 4 max
Isolated RS-232 output to WinDMM300 Windows software
Water resistant via O ring sealed case
Easy to use on screen menu selection
Features include: STORE, RECALL, AUTO HOLD, MIN, MAX, RELATIVE &
PERCENTAGE, HI/LO LIMITS, dB & dBm display
Safety features include fuse failure indication, high input voltage warning on
display, high energy fused current inputs
Complies to BSEN61010-1 (safety standard) 600V Cat III/1000V Cat II
IDM303
7 measurement memories
0.5ms Peak Hold
Type K temperature measurement input & sensor
Supplied with protective holster, soft carry case with test leads set, crocodile clips, K type
thermocouple adaptor and bead sensor, instruction manual and 9V alkaline battery
IDM305 additional features
Complete datalogging kit supplied with RS-232 cable & WinDMM300 software
Software
For Windows 95/98, 2000, NT4 & XP
Minimum PC requirements:- Pentium PC with CD-ROM drive 16MB RAM, COM1 or COM2 Serial
Port
Note: IDM305 model (329-3801) and Software (456-7440) are only available on the RS website
Colour of products may differ from that shown.
Supplied with: protective holster, soft carry case with test lead set, crocodile clips, K type
thermocouple adaptor and bead sensor, RS-232 cable, WinDMM300 software, instruction manual and
9V alkaline battery (fitted).
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
IDM303
0.1%
+2 D
40mV
1000V
1μV
±0.9%
+5 D
400mV
750V
10μV
IDM305
±0.06%
+2 D
40mV
1000V
1μV
±0.7%
+5 D
400mV
750V
10μV
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
Professional Test Leads
AC Voltage Max Frequency
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
Stock no.
S697-4011
10kHz
±0.3%
+4 D
40mA
10A
1μA
±1%
+8 D
40mA
10A
1μA
400Hz
±0.4%
+2 D
Price per
unit
OM
S$
1+
390·00
10kHz
±0.2 %
+4 D
40mA
10A
1μA
±0.8 %
+8 D
40mA
10A
1μA
400Hz
±0.3 %
+2 D
S$
1000V maximum working voltage, 10A max working
current
Double insulated silicone leads with white inner insulation to
highlight cuts or abrasions to the cable
Comprises 2 each (1 red 1 black): 1.2m silicone insulated lead with
straight 4mm shrouded plug on one end and right angled 4mm
shrouded plug on the other; plug in test prod, removable prod tip
insulator
Accessories available:
1 pair sprung grabbers and 1 pair shrouded crocodile clips
1 pair fused test prods and 1 pair fused croc clips complying to
GS38 safety guidance for work on high energy circuits. Fitted with 0.5A 600V 50kA fuse
S$
ISO-TECH Accessories
Multimeter Test Leads
Replacement test leads to suit ISO-TECH, Wavetek and most
other digital multimeters. Fitted with right-angled 4mm
shrouded plugs and supplied with probe tip insulators to
prevent accidental short circuits and a pair of crocodile
clips.,Probes designed to meet BS EN 61010-1 (safety
standard) 1000V Cat III.,Current rating 10A.
Type
Connection Type
Test Lead
Shrouded Right Angle Plug
Stock no.
243-2998
Description
unit
OM
S$
1+
27·90
BS EN 61010-1 CAT III 1000V
S$
S$
Fused Test Leads
Offers a high degree of protection to the user when
measuring on high energy circuits up to 1000V.
Each lead is fused with a 500mA/1000V 50kA fast acting
HBC fuse
Integral fuse holders
Double insulated silicone cable incorporating wear
indicator
Description
Fused test leads, straight 4mm
Fused test leads, 90° 4mm
Crocodile Clips
Stock no.
Fused test leads, straight 4mm
Fused test leads, 90° 4mm
Crocodile Clips
388-4126
388-4104
388-4110
Price per
unit
unit
unit
OM
S$
1+
1+
1+
42·90
68·50
16·80
Stock no.
388-4126
388-4104
388-4110
S$
S$
Stock no.
1000V 500 mA Fuse
388-4132
Price per
unit
OM
S$
3+
5·30
S$
S$
High Spec. Test Leads IEC
1010 1000V Cat III
A pair of 1.2m silicone leads with integral test prods
terminated with shrouded, right angled 4mm plugs and
supplied with a pair of handy push fit crocodile clips. Tip
diameter 14mm. Rating 15A.
Standards
IEC 1010 1000V Cat III
Stock no.
207-9907
Price per
unit
OM
S$
1+
72·00
S$
S$
Price per
unit
unit
1 pair
unit
1 pair
Voltage (V)
1000
1000
600
600
600
OM
S$
1+
1+
1+
1+
1+
39·50
17·70
26·50
12·50
39·90
Stock no.
340-2538
340-2544
340-2550
340-2588
340-2566
S$
S$
S$
S$
Burns, due to arcing or &#146;flashover&#146; resulting from the use of
unsatisfactory test probes, account for more accidents in electrical
testing than are caused by electric shock. Because of this, fused test
leads with 2mm or less of exposed insulation are recommended for
electrical use by the HSE in their guidance note GS38. ,This auxiliary test
lead is designed for use with a wide range of earth loop impedance
testers and RCD testers. Both the red and black probes are fused to
enhance the safety of the user.
Stock no.
216-839
218-100
Price per
unit
unit
OM
S$
1+
1+
74·50
20·10
High Specification Multimeter
Test Lead Set,IEC 1010, 1000V
Cat III
Test Lead Set (RS 207-9913) supplied in a blister pack that
provides a range of accessories suitable for many
measurement applications.Set Contents:
2 x 1.2m silicone rubber leads terminated with one 4mm
shrouded right angle plug and one 4mm shrouded
straight plug
2 x plug in multimeter probes
2 x spring-loaded grabber hooks
2 x crocodile clips
Additional Fused Test Prods to fit the multimeter Test
Lead Set are available and are necessary to provide a safe
means of voltage measurement on high energy circuits. Meeting the requirements of GS38 safety
guidance and IEC1010 Cat III 1000V safety standard, each prod is fitted with a 500 mA 1000 V HRC fuse.
Add-on Crocodile Clips can be combined with the Fused Test Prods and multimeter Test Lead Set to
provide a fused crocodile clip configuration maintaining the requirements of GS38 and IEC 1010 Cat III
1000 V.
Description
Test Leads Set
Fused Test Prods
Crocodile Clips
Description
Standards
IEC 1010, 1000V Cat III
IEC 1010, 1000V Cat III GS38
IEC 1010, 1000V Cat III
Stock no.
Test Leads Set
Fused Test Prods
Crocodile Clips
1000V 500 mA Fuse
Fused Test Lead with
Crocodile Clip
Standards
EN61010 1000V CAT III
EN61010 1000V CAT III
EN61010 1000V CAT III
CAT III 600V
CAT III 600V
Fused Test Lead Set for Loop &
RCD Testers
Fused test leads
Shrouded Crocodile Clips
Accessories
Description
340-2538
340-2544
340-2550
340-2588
340-2566
Description
Standards
BS EN 61010 1000V Cat III
BS EN 61010 1000V Cat III; GS38
IEC 1010, 1000V Cat III
Description
Stock no.
Prof. test leads
Sprung grabbers
Fused prods
Crocodile clips
Crocodile clips, fused
Safety Rating/Classification
Price per
Supplied with: instruction leaflet.
Description
Prof. test leads
Sprung grabbers
Fused prods
Crocodile clips
Crocodile clips, fused
207-9913
425-3826
388-4110
388-4132
Price per
unit
unit
unit
unit
OM
S$
1+
1+
1+
3+
52·00
45·10
16·80
5·30
Stock no.
207-9913
425-3826
388-4110
S$
S$
Suitable for use with the IDM 17 DMM, Supplied with fully
insulated screw-in croc clip.
Standards
Voltage
GS38, IEC 1010-2
450 Vac/dc rms
Stock no.
816-029
Price per
unit
OM
S$
1+
29·20
S$
S$
www.rssingapore.com
95
New products available online every week
2313
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Fluke
Note: For a selection of Fluke test leads and accessories see "Fluke Accessories" Range in this Section
Fluke 280 Series Digital Multimeters
High performance multimeters designed to meet the
demanding applications of professional engineers. The Fluke
287 is optimised for R & D, maintenance, manufacture and
design of electronic circuits or systems. The Fluke 289 is
optimised for industrial and field service professionals
involved in the installation and maintenance or support of
facilities or critical systems.
Fluke 287 & 289 Features
50,000 count, 320 x 240 dot matrix LCD display with white
backlight, allowing clear multiple on-screen display of
measurement information
0.025% basic DC accuracy
Logging function with TrendCapture plots measurements
as single line to help detect anomalies
TrendCapture lets you graphically view logged readings
Fluke 289
Fluke 287
without needing a PC
F1 → F4 soft keys provide flexible user function menus
Navigation keys allow the user to quickly select menu options and scroll through the information
screens.
Saved measurements allow the user to name and recall measurements made in the field
Upgradeable field and expandable meter as new capabilities are added
Record events and trends for troubleshooting intermittent problems or profiling loads
i-info button on-board helps screen for measurement functions
Internal memory allows stand-alone logging for up to 180 hours
Preferred measurement settings can be easily saved
True RMS AC voltage and current for accurate measurement of complex signals or non-linear
loads. AC bandwidth specified to 100 kHz
DBV / dBm measurement
1 μV resolution in DC mV range
Current measurement 20 A (30 seconds momentary; 10 A continuous)
Peak capture function to record transients as fast as 250 μs
Continuity / Conductance / Capacitance
Resistance and continuity
Duty cycle & pulse width measurement
Min / Max / Average with Time Stamp to record signal fluctuations
Real time and elapsed time modes
CAT III 1000 V / CAT IV 600 V safety rated
Fluke 289 additional features:
LoZ: low input impedance function helps prevents false readings due to "ghost voltage"
50 ohm range for motor winding and low ohm measurements
Low pass filter, allows for accurate measurements of motor drives
Supplied with: batteries, test leads and instruction manuals
Contact RS for calibration requirements
Function
Range
Basic accuracy
DC
50.000 mV,500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0V
0.025 %
A.c. voltage
50.000 mV,500.00 mV, 5.0000 V, 50.000 V, 500.00 V, 1000.0V
0.4% (true rms)
DC
500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A
0.15 %
0.7% (true rms)
A.c. current
500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A
Temperature
-200.0 °C to 1090.0 °C (-328.0 °F to 1994.0 °F)
1.0 % + 10 C
(excluding probe)
Resistance
50.000Ω (289 only), 500.00Ω, 5.0000 kΩ, 50.000 kΩ, 500.00 kΩ,
0.05 %
5.0000 MΩ, 50.00 MΩ, 500.0 MΩ
Capacity
1.000 nF,10.00 nF 100.0 nF, 1.000 μF, 10.00 μF, 100.0 μF, 1000 μF, 1.0 %
10.00 mF, 50.00 mF
Frequency
999.99 kHz
0.005 % + 1
Description
Stock no.
Fluke 287
Fluke 289
FVF-SC2 Flukeview software
S156-724
156-730
385-0599
Price per
OM
S$
unit
unit
unit
1+
1+
1+
905·00
1057·00
390·00
Price per
OM
S$
1+
1+
69·10
59·50
S$
S$
S$
S$
Accessories
Description
Stock no.
Fluke Toolpak accessories
Soft carry case C280
331-7402
543-330
unit
unit
Fluke 287FVF Digital Multimeter and
software Kit
The 287/FVF combo kit provides a practical & affordable
approach to documenting circuit design performance.
The Fluke -287/FVF kit includes:
Fluke-287 true-RMS digital multimeter with TrendCapture
and data logging
FlukeView Forms software to store documents and
analyze readings or a series of measurements
Opto isolated USB interface cable
80BK-A thermocouple probe and adaptor
CAT III 1000 V 10 A Modular test leads (red, black)
CAT III 1000 V 10 A Modular test probes (red, black)
CAT II 300 V 5 A Alligator Clips (red, black)
Soft case for meter protection and accessory storage
6 AA batteries
Instruction manual
Note: For details of the Fluke 287 True-RMS industrial datalogging multimeter see stock no.156-724
Stock no.
665-4684
Price per
unit
OM
S$
1+
1134·00
S$
S$
Fluke 289FVF Digital Multimeter and
Software Kit
The Fluke 289/FVF kit is optimized for Industrial and field
service professionals and provides a practical approach to
predictive maintenance.,The built-in data logger and
TrendCapture capability of the Fluke 289 can monitor
equipment with any of its functions to help track down
elusive and intermittent problems.
Fluke-289 True-RMS industrial logging multimeter
FlukeView Forms software and cable
80BK thermocouple
TL 71 silicone test lead set
AC72 crocodile clips
TPAK magnetic meter hanger for hands-free operation
Soft case for meter protection and accessory storage
6 AA batteries
Instruction manuals.
Note: For details of the Fluke 289 True RMS logging multimeter see stock no. 156-730
Contact RS for calibration requirements
Series
Maximum Voltage Measurement
Stock no.
S381-924
OM = Order Multiple
OM
S$
1+
1191·00
Backlight LCD
CAT III 1000V, CAT IV 600V
S$
S$
S$
S$
SC2 FlukeViewᓼ Forms Software
Stock no.
385-0599
Price per
unit
OM
S$
1+
390·00
Fluke 233 True RMS Wireless Display
Digital Multimeter
The Fluke 233 remote display digital multimeter with removable display solves the
problems of holding both the meter and the test leads to make a measurement,
making measurements in hard-to-reach places, and making measurements in
machines or panels that are physically separated from a limit switch or an isolator
switch. The Fluke 233 is also designed to work in areas where the operator cannot be
close to the active measurement point, like clean rooms or hazardous areas
Wireless technology allows the display to be carried up to 10m away from the point
of measurement for added flexibility
The removable magnetic display can be conveniently mounted where it is easily
seen
Measurements can be made without holding the meter to improve visual focus on
probes and augment safe electrical measurements
Low-power 802.15.4 wireless technology does not interfere with measurement
accuracy
Use as a conventional multimeter when the display is connected
Radio transmitter automatically turns off when the display is connected to the meter
True-rms ac voltage and current for accurate measurements on non-linear signals
Min/Max and average recording to capture variations automatically
Resistance, continuity and diode test
K Type Temperature measurement range
Easy to read display with large digits and bright backlight
Auto power off maximizes battery life
Safety rating CAT IV 600 V, CAT III 1000V
Supplied with: AA batteries, test leads, 80BK-A temperature probe, crocodile clips and instruction
manual
DC Voltage
Max. Resolution
0.1 mV → 1000 V
Accuracy
0.25% + 2
AC Voltage
Max. Resolution
0.1 mV → 1000 V
1.0% + 3
Accuracy
DC current
Max. Resolution
0.1 mA → 10 A
Accuracy
1.0% + 3
AC current
Max. Resolution
0.1 mA → 10 A
1.5% + 3
Accuracy
Resistance
Max. Resolution
0.1 Ω → 40 MΩ
Display Counts
6000
Capacitance Measurement Range
1000 nF → 9999 μF
Frequency Measurement Range
0.1 Hz → 50.00 kHz
Temperature Measurement Range
-40 °C → +400 °C
Power
3 x AA battery main body, 2 AA batteries display
Battery life
200 Hrs
Wireless Frequency
2.4 GHz
S669-8313
2314
unit
Display Type
Safety
FlukeView Forms documenting software increases the
power of Fluke test tools by enabling documenting, storage
and analysis of individual readings or series of
measurements, and conversion into professional-looking
documents.
Records, charts and graphs data with standard or
customised forms
Automatic meter recognition
Database search and interactive logging feature
9 standard forms
Includes FlukeViewᓼ Forms Designer to modify and
customize forms and change company name on a report
View up to 8 instruments simultaneously
Supports multi-page forms
Compatible with Fluke FL183, 185, 187, 189, 287 & 289,
789, 1550B, 1653 , 1653B 1654B, 53-2B & 54-2B
Supplied on CD-ROM with USB to IR interface cable and installation guide.
Stock no.
95
Price per
FL289/FVF
1000 Vac/dc
Price per
unit
OM
S$
1+
545·00
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
FL175, FL177 & FL179
Fluke 83-V & 87-V Multimeters
Models supplied with TL76 test lead set, instruction manual and 9V alkaline batteries.
80BK type K bead thermocouple probe with integral adaptor (FL179 only).
6000 count LCD with 33 segment bargraph
True rms (a.c.) measurement
EN61010-1 safety standard compliance to Cat IV 600V & Cat III 1000V
Resistance, continuity and diode measurement
Capacitance measurement up to 10000μF
Frequency measurement up to 100kHz
Min/Max/Average recording
Display and Auto Hold
Separate battery and fuses access without breaking the calibration seal
Compatible with Fluke Toolpakᓽ magnetic hook and strap hanger kit (stock no.
331-7402)
FL177 & 179 Additional Features
Display backlight
FL179 Additional Features
Type K thermocouple measurement input. (Bead thermocouple supplied)
Type K thermocouple adaptor to accept other type K thermocouples with miniature connectors is
also available separately (615-488)
Contact RS for calibration requirements
FL175
±0.15%
+2 D
600mV
1000V
0.1mV
±1%
+3 D
600mV
1000V
0.1mV
500Hz
±1 %
+3 D
60mA
10A
0.01mA
±1.5%
+3 D
60mA
10 A
0.01mA
500Hz
±0.9%
+1 D
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
Description
Stock no.
S394-4470
S394-4486
S394-8848
S394-4492
S394-8860
FL175
FL177
+ UKAS Cal.
FL179
+ UKAS Cal.
Price per
unit
unit
unit
unit
unit
OM
FL177 & FL179
±0.09%
+2 D
600mV
1000V
0.1mV
±1%
+3 D
600mV
1000V
0.1mV
500Hz
±1%
+3 D
60mA
10A
0.01mA
±1.5%
+3 D
60mA
10A
0.01mA
1kHz
±0.9 % / ±0.7%
+1 D / +2 D
S$
1+
1+
1+
1+
1+
458·00
476·00
651·00
495·00
709·00
OM
S$
1+
522·00
S$
S$
Accessories
Stock no.
S451-8678
Price per
unit
S$
S$
FL179E Electrical Multimeter Kit
A kit for industrial and commercial electricians and electrical engineers. Supplied
complete with professional 10A rated accessories for demanding environments.
Fluke 179 Multimeter
6000 count LCD with 33 segment bargraph
True rms (a.c.) measurement
EN61010-1 safety standard compliance to Cat IV 600V & Cat III 1000V
Resistance, continuity and diode measurement
Capacitance measurement up to 10000μF
Frequency measurement up to 100kHz
Min/Max/Average recording
Display and Auto Hold
Separate battery and fuses access without breaking the calibration seal
Display backlight
Type K thermocouple measurement input. (Bead thermocouple supplied)
Type K thermocouple adaptor to accept other type K thermocouples with miniature connectors is also
available separately
TL224 SureGrip
1.5m silicone insulated test lead, safety shrouded 4mm banana plugs
Resistent to temperature extremes
TP38 Slim reach probe set
Pair (red and black)
Minimal exposed tips to GS38
AC285 SureGrip
Alligator clip (black rubber overmoulded) with Nickel plated steel jaws
From wire gauge to 20mm bolt wire
Note: All accessories with safety standard compliance to Cat IV 600V, Cat III 1000V, 10A rating
(EN61010-2-031)
Stock no.
S463-6401
Description
Stock no.
83-V
+ RS Cal.
Fluke 87-V
+ UKAS Cal.
+ RS Cal.
S480-2361
S481-8164
S480-2355
S481-8158
S481-8142
Price per
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
681·00
796·00
698·00
1041·00
945·00
S$
S$
Fluke 87-V Ex
Description
FL179 + Toolpak
Unique function for accurate voltage and frequency
measurements on adjustable speed motor drives and
other electrically noisy equipment
87-V has a Built in thermometer that conveniently allows
you to take temperature readings without having to carry
a separate instrument
Optional magnetic hanger for easy setup and viewing
while freeing your hands for other tasks (see RS 4802406)
Large digit display with bright two level backlight makes
the 87-V significantly easier to read than older models
Withstands hazardous 8000 volt spikes caused by load
switching and faults on industrial circuits and complies
with second edition IEC and ANSI electrical safety
standards
83-V
87-V
Model 83-V has 0.08% accuracy
Contact RS for calibration requirements
83-V
87-V
83-V & 87-V
Voltage dc
Capacitance
Max voltage
1000V
1000V
Max capacitance
9999μF
Accuracy
0.1% +1
0.05% +1
Accuracy
1% +2
Max resolution 100μV
10μV
Max resolution
0.01nF
Voltage ac
Frequency
Max voltage
1000V
1000V
Max frequency
200kHz
Accuracy
0.5% +2
0.7% +2
Accuracy
0.005% +1
AC Bandwidth
5kHz
20kHz
Max resolution
0.01Hz
Max resolution 0.1mV
0.1mV
Duty cycle
Current dc
Max duty cycle
0.999
Max current
10A (20A for 30sec max) Accuracy
0.2% per kHz +0.1%
Accuracy
0.4% +2
0.2% +2
Max resolution
0.001
Max resolution 0.01mA
0.01μA
Temperature measurement 87-V only
Current ac
Range
-200 to 1090°C excl. probe
Max current
10A (20A for 30sec max) Resolution
0.1°C
Accuracy
1.2% +2
1.0% +2
Accuracy
1% +10
Max resolution 0.1μA
0.1μA
Conductance
Resistance
Max conductance
60.00nS
Max resistance 50MΩ
50MΩ
Accuracy
1% +10
Accuracy
0.4% +1
0.2% +1
Max resolution
0.01 nS
0.1Ω
Diode
Max resolution 0.1Ω
Resolution
1mV
Accuracy
2% +1
Duty cycle range accuracy
within 0.2% per kHz + 0.1%
Price per
unit
OM
S$
1+
480·00
S$
S$
The Fluke 87-V Ex is an intrinsically safe version of the Fluke 87V.It has
measurement functions, troubleshooting features, plus the resolution
and accuracy to solve problems on motor drives, in plant automation,
power distribution and electromechanical equipment. Additionally, it
has an intrinsically safe rating and ATEX certification for use in
hazardous areas. A general-purpose measurement tool that can be used
in environments such as (petro-)chemical plants, the pharmaceuticals
industry and other locations subject to risk of explosion.
ATEX safety rating for use in Zone 1 and Zone 2
Large digital display with bright, two-level backlight makes the 87-V
Ex very easy to read
Built-in thermometer for convenient temperature readings
True rms ac voltage and current for accurate measurements on non-linear signals
Measure up to 1000V (ac/dc) and 10A (ac/dc) with a very wide 20kHz bandwidth
Selectable filter for accurate voltage and frequency measurements on motor drives
4.5 digit mode for precise measurements (20000 counts)
Frequency to >200kHz and % duty cycle
Resistance, conductance, continuity and diode test
10000μF capacitance range for components and motor caps
Min/Max-Average recording with Min/Max Alert to capture variations automatically
Touch Holdᓼ to capture stable readings avoiding noisy signals
Peak capture to record transients as fast as 250μs
Relative mode to remove test lead interference from low ohm measurements
Auto and manual ranging for maximum flexibility
Analog bar graph for fast changing or unstable signals
Input Alert provides audible warning against wrong use of input jacks
Selectable sleep mode for long battery life
EN61010-1 rating CAT IV 600V, CAT III 1000V
Group & Category: Ex II 2 G EExia IIC T4
Contact RS for calibration requirements
DC Voltage Accuracy
DC Voltage Highest Range
AC Voltage Accuracy
AC Voltage Highest Range
Stock no.
S539-1929
±0.05% + 1
1000V
±0.7% + 2
1000V
Price per
unit
DC Current Highest Range
AC Current Highest Range
Resistance Accuracy
OM
S$
1+
1786·00
10A
10A
±0.2% + 1
S$
S$
95
Many more leading brands from over 2,500 suppliers available online
2315
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Fluke 113 Multimeter
Fluke 115 Multimeter
True-RMS for accurate ac measurements of non-linear loads
Large backlit display allows for easy visibility in poorly lit areas
VCHEKᓽ measurement function to simultaneously test for voltage or
continuity through low input impedance (3kΩ) inputs
Min/Max function to record level fluctuations
Diode test for testing general-purpose germanium, silicon, and power diodes
Integral holster with probe holders for easy storage
Auto and Manual ranging
9999μF capacitance measurement
Category CAT III 600V and Category IV 300V safety rated
Note: Accuracy is specified for 1 year after calibration, at operating temperatures
of 18 °C to 28 °C, with relative humidity at 0% to 95%
Supplied with: TL75 test lead set, 9V PP3 alkaline battery, users manual
Contact RS for calibration requirements
True RMS
Large white LED backlight
Current measurement 20A (30 seconds momentary; 10A continuous)
Resistance, continuity, frequency and capacitance testing capability
11A, 1000V FAST fuse (Fluke part no. 803293)
CAT III 600 V safety rated
Note: Accuracy is specified for 1 year after calibration, at operating temperatures of
18 °C to 28 °C, with relative humidity at 0 % to 95 %.
Supplied with: Manual and test lead set.
Contact RS for calibration requirements
DC Voltage Accuracy
DC Voltage digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
Stock no.
S501-382
±2.0%
3
6V
600V
1mV
±2.0%
3
6V
600V
1mV
Price per
AC Voltage Max Frequency
Resistance Accuracy
Resistance digits
Resistance Lowest Range
Resistance Highest Range
Capacitance Accuracy
Capacitance digits
Capacitance Lowest Range
Capacitance Highest Range
OM
unit
S$
30kHz
±0.9%
1
600Ω
60kΩ
±1.9%
2
1000nF
9999μF
S$
S$
1+ 227·00
Fluke 113 Multimeter & 322 clamp meter
kit
Stock no.
S616-1454
Electricians multimeter kit comprising the
Fluke 113 multimeter and 322 current clamp
meter for safe, non intrusive current
measurement up to 400 Aac
Fluke 113 Multimeter
VCHEKᓽ LoZ low impedance measurement function to
simultaneously test for voltage or continuity
True-rms for accurate ac measurements on non-linear loads
A large backlit display allows for easy visibility in low-lit areas
Record signal fluctuations using the Min/Max function
Diode test for testing general-purpose germanium, silicon, and
power diodes
Resistance, continuity and capacitance ranges
Integral holster with probe holders for easy storage
Auto and Manual ranging for added user functionality
Category CAT III 600 V and Category IV 300 V standards for a high level of safety
Fluke 322 Clamp meter
Precise measurements with 1.8% basic accuracy
Resolution up to 0.01A and 0.1 V
Measures AC current to 400 A
Measures AC & DC volts to 600 V
Resistance measurement to 400 Ω
Continuity for quick checking of shorts
Display hold function
25mm jaw opening
Specific Application
Series
Electrical
Fluke 113/322
Stock no.
a665-4697
unit
OM
S$
1+
382·00
S$
S$
True RMS
Large white LED backlight
Min/Max/Average to record signal fluctuations
Resistance and continuity testing capability
CAT III 600V safety rated
Note: Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.
Supplied with: Manual and test lead set.
Contact RS for calibration requirements
Stock no.
S616-1498
0.5% + 2
600.0mV
600.0V
0.1mV
2.0% + 3
600.0mV
600.0V
0.1mV
Price per
unit
AC Voltage Max Frequency
Display Count
Display Update
Bar Graph Segments
Bar Graph Update
Operating Temperature
Battery Life
OM
616-1476
OM
S$
1+
293·00
1.5% +2d
600.0Ω
40.00MΩ
2.000V
0.001V
0.9% + 2d
1.9% + 2d
1000nF
9999μF
1nF
6000
4/sec
33
32/sec
-10°C to +50°C
400 hours typical
S$
S$
0.5% +2d
600.0mV
600.0V
0.1mV
2.0% +3d
600.0mV
600.0V
0.1mV
1kHz
1.0% +2d
600.0μA
600.0μA
0.1μA
1.5% +3d
600.0μA
600.0μA
*
1kHz
Resistance Accuracy
Resistance Lowest Range
Resistance Highest Range
Diode Test Range
Diode Test Resolution
Diode Test Accuracy
Capacitance Accuracy
Capacitance Lowest Range
Capacitance Highest Range
Capacitance Lowest Resolution
Temperature Measurement Range
Temperature Resolution
Temperature Accuracy
Display Count
Display Update
Bar Graph Segments
Bar Graph Update
Operating Temperature
Battery Life (without backlight)
Price per
unit
OM
S$
1+
340·00
1.5% +2d
600.0Ω
40.00MΩ
2.000V
0.001V
0.9% +2d
1.9% +2d
1000nF
9999μF
1nF
-40°C to 400°C
0.1C
1% +10d
6000
4/sec
33
32/sec
-10°C to +50°C
400 hours typical
S$
S$
Fluke 117 Multimeter
S$
1+ 246·00
95
2316
Price per
unit
DC Voltage Accuracy
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
DC Current Accuracy
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Stock no.
1kHz
6000
4/sec
33
32/sec
-10°C to +50°C
400 hours typical, without backlight (all models)
S$
Resistance Accuracy
Resistance Lowest Range
Resistance Highest Range
Diode Test Range
Diode Test Resolution
Diode Test Accuracy
Capacitance Accuracy
Capacitance Lowest Range
Capacitance Highest Range
Capacitance Lowest Resolution
Display Count
Display Update
Bar Graph Segments
Bar Graph Update
Operating Temperature
Battery Life (without backlight)
Built in thermometer and temperature probe included for HVAC applications
Microamps to test flame sensors
LoZ: Low input impedance to eliminate stray voltage
Large white LED backlight
Min/Max/Average to record signal fluctuations
Resistance, continuity, frequency and capacitance testing capability
CAT III 600V safety rated
Note: Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.
Supplied with: Manual and test lead set.
Contact RS for calibration requirements
Fluke 114 Multimeter
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
0.5% +2d
600.0mV
600.0V
0.1mV
2.0% +3d
600.0mV
600.0V
0.1mV
1kHz
1.0% +3d
6.000A
20.00A
0.001A
1.5% + 3d
6.000A
20.00A
500Hz
Fluke 116 Multimeter
Safety Category CAT III 600V and Category IV 300V
Price per
DC Voltage Accuracy
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
DC Current Accuracy
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Lowest Range
AC Current Highest Range
AC Current Max Frequency
OM = Order Multiple a New product to range
S$
VoltAlertTM Technology for intergrated non-contact voltage detection
AutoVolt feature for automatic AC/DC voltage selection
LoZ: Low input impedance to eliminate stray voltage
Large white LED backlight
True RMS
Min/Max/Average to record signal fluctuations
Current measurement 20A (30 seconds momentary; 10A continuous)
Resistance, continuity, frequency and capacitance testing capability
11A, 1000V FAST fuse (Fluke part no. 803293)
CAT III 600 V safety rated
Note: Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.
Supplied with: Manual and test lead set.
Contact RS for calibration requirements
DC Voltage Accuracy
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
DC Current Accuracy
DC Current Lowest Range
0.5% +2d
600.0mV
600.0V
0.1mV
2.0% +3d
600.0mV
600.0V
0.1mV
1kHz
1.0% +3d
6.000A
Resistance Accuracy
Resistance Lowest Range
Resistance Highest Range
Diode Test Range
Diode Test Resolution
Diode Test Accuracy
Capacitance Accuracy
Capacitance Lowest Range
Capacitance Highest Range
Capacitance Lowest Resolution
Display Count
* manufacturers information unavailable at time of printing
1.5% + 2d
600.0Ω
40.00MΩ
2.000V
0.001V
0.9% +2d
1.9% +2d
1000nF
9999μF
1nF
6000
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
Fluke 1577 & 1587 Insulation Multimeters
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Lowest Range
AC Current Highest Range
AC Current Max Frequency
Stock no.
S616-1460
20.00A
0.001A
1.5% +3d
6.000A
20.00A
500Hz
Display Update
Bar Graph Segments
Bar Graph Update
Operating Temperature
Battery Life (without backlight)
Price per
unit
OM
S$
1+
360·00
4/sec
33
32/sec
-10°C to +50°C
400 hours typical
S$
S$
Fluke 77 Series IV
All inputs, ranges and functions protected against overvoltage transients
Digital display with analogue bargraph
Display back light
3200 count autoranging and manual range selection
Touch Holdᓼ to automatically capture stable readings
Min/mix/average mode with min/max alert
Automatic power down if left unused when switched on to preserve battery
life
Integrated protective holster
EN61010-1 (safety standard) 600V Cat III, over-voltage protection to 6KV
Voltage measurements up to 1000V ac and dc, 0.1mV resolution
EN61010-1 (safety standard) rating 600V cat IV/1000V cat III
Supplied with: TL75 test leads, battery and user manual.
Contact RS for calibration requirements
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Stock no.
S132-198
±0.3%
+1 D
320mV
1000V
0.1mV
±2%
+2 D
3.2V
1000V
1mV
1kHz
Price per
unit
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
OM
S$
1+
471·00
±1.5%
+2 D
60mA
10A
0.01mA
±2.5%
+2 D
60mA
10A
0.01mA
1kHz
±0.5%
+1 D
S$
S$
Fluke 27 II & 28 II: Rugged IP67 Industrial
Multimeters
Fluke 1577 & 1587
Large display with backlight
Insulation test: 1587: 0.01 MΩ to 2 GΩ. 1577: 0.1 MΩ to 600 MΩ
Insulation test voltages (V) 1587: 50, 100, 250, 500, 1000; 1577: 500, 1000) for
many applications
Live circuit detection prevents insulation test if voltage >30V is detected for
added user protection
Auto-discharge of capacitive voltage for added user protection
AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (Ω), Continuity
Auto power off
CAT III 1000V, CAT IV 600V measurement category
H. 50 x W. 203 x D.100mm; Wt. 550g
Fluke 1587 additional features:
Filter for motor drive measurements
Capacitance, diode test, temperature, Min/Max, frequency (Hz)
Insulation test smoothing reading
K-type thermocouple
Supplied with: Batteries, remote probe, test leads and probes, alligator clips, instruction manual,
rugged utility hard case and (1587 only) K-type thermocouple.
Contact RS for calibration requirements
Description
IP67 rated multimeter for operating in harsh conditions with features and
accuracy to troubleshoot most electrical problems
1577
±0.2%
+2D
6V
1000V
0.001V
±2%
+3D
600mV
1000V
0.1mV
60Hz
±1%
+2D
60mA
400mA
0.01mA
±2%
+2D
60mA
400mA
0.01mA
1kHz
±1.2%
+2D
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
Stock no.
S512-2492
S512-2486
Fluke 1577
Fluke 1587
Price per
unit
unit
OM
S$
1+
1+
963·00
1172·00
1587
±0.09%
+2D
6V
1000V
0.001V
±1%
+3D
600mV
1000V
0.1mV
5kHz
±0.2%
+2D
60mA
400mA
0.01mA
±1.5%
+2D
60mA
400mA
0.01mA
1kHz
±0.9%
+2D
S$
S$
Fluke 1587 Insulation Multimeter and i400
Clamp Adapter
Designed to withstand 3 metre drop
-15° C to + 55°C extended operating temperature range
Extended AC voltage bandwidth, 15Hz to 20 kHz
Average responding voltage and current for measurements
Easy to read large digit display with a bright, two-level backlight
Backlit keypad buttons allows for easy visibility in low-lit areas
Reversible holster for added protection when not in use
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
Sleep mode for long battery life
Relative mode to remove test lead resistance from low ohms measurements
Min/Max and average recording
Auto and manual ranging for maximum flexibility
Resistance, continuity and diode test
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
US Mine Safety & Health Administration approval (MSHA)
Dimensions: 61 X 102 X 203 mm
Safety rating CAT IV 600 V , CAT III 1000V
28-II additional features:
Hi Resolution 20,000 count display mode
True-rms ac voltage and current for accurate measurements on non linear signals
Low pass filter function for accurate voltage and frequency measurements on adjustable speed
motor drives and other electrically noisy equipment
K Type thermocouple temperature measurement. ( 80BK-A Integrated DMM thermocouple
supplied)
Supplied with: Holster, test leads and crocodile clips, manual and 3 AA alkaline batteries (800 Hrs)
Specification
27 II
28 II
1 nF → 9999 μF
Capacitance Measurement
1 nF → 9999 μF
0.5Hz Hz → 199.99 kHz
Frequency Measurement
0.5Hz → 199.99 kHz
Temperature Measurement
-200 °C → +1090 °C
Low pass filter
Yes
Description
Fluke 27-II
Fluke 28-II
Stock no.
S669-8322
S669-8325
Price per
unit
unit
OM
S$
1+
1+
771·00
789·00
S$
S$
Industrial maintenance kit comprising the
Fluke 1587 insulation multimeter and i400
current clamp adaptor to extend the
current measurement range up to 400 Aac.
1587
Ideal kit for trouble shooting or predictive maintenance in
industrial applications
Large display with backlight
Insulation test: 0.01 MΩ to 2 GΩ
50, 100, 250, 500, 1000V insulation test voltages for many
applications
Live circuit detection prevents insulation test if voltage >30V
is detected for added user protection
Auto-discharge of capacitive voltage for added user
protection
AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (Ω), Continuity
CAT III 1000V, CAT IV 600V measurement category
Filter for motor drive measurements
Capacitance, diode test, temperature, Min/Max, frequency (Hz)
i400
Measure up to 400 A AC
1mA/Amp output guarantees easy reading on the 113 multimeter
CAT IV 600 V, CAT III 1000 V safety rating
Max. conductor Ø 32 mm
Specific Application
Safety
Stock no.
a665-4690
Insulation
CAT IV 600V, CAT III
Price per
unit
Current Accuracy
Display Type
ac: ±2%;dc: ±1 %
Backlight LCD
OM
S$
S$
1+
1535·00
S$
Fluke 88 Series V Automotive Multimeter
Fluke 88V Automotive DMM
TL224 SureGrip Silicone Test Lead Set
TP220 SureGrip Test Lead Set
AC285 SureGrip Large Jaw Alligator Clip Set
TPAK hanging accessory
80BK temperature probe
RPM80 inductive pickup
C800 carry case
Insulation piercing probe
2 Back probe pins
Stock no.
493-4503
Price per
unit
OM
S$
1+
1061·00
Visit our website for additional price information and exciting promotions
S$
S$
95
2317
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Fluke Automotive Accessories
All accessories are tested to 60Vdc
TP81 insulation piercing clip set
Banana jack accepts standard DMM
and banana leads
Non-rotating banana jack prevents leads from tangling,
allowing you to tighten/loosen clamp while still
connected to the test lead
Available for 4mm input, modular connection withTP81
TP84 Oxygen sensor insulation piercing clip
Banana jack accepts DMM and banana jack leads
Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while
still connected to the test lead
TP88 Rigid back probe pin set
Slides onto test probes measuring 2mm
Description
Stock no.
a493-3257
a493-3285
TP81
TP88
Price per
OM
S$
1+
1+
88·30
26·80
1 set
1 set
S$
S$
Fluke Combo Kits
Fluke 87V/ E2 Industrial Electrician
Combo Kit
Price per
S237-160
unit
Fluke 87V_i410 combo kit
Sa540-498
Price per
unit
OM
S$
1+
789·00
S$
S$
Price per
unit
OM
S$
1+
1098·00
S$
OM
S$
1+
771·00
S$
Fluke has combined the best-selling feature-packed 87V
Multimeter with the TL81A test lead set for the complete
solution to electronic circuit board troubleshooting.
Together they provide the ability to probe and troubleshoot
even the most densely populated circuit boards more
efficiently by providing all the needed accessories a
professional electronic engineer would require.
Contact RS for calibration requirements
Note: See RS 480-2355 for complete Fluke 87V
specifications
Supplied with: Fluke 87V Multimeter with temperature
frequency, capacitance 250 μs peak min-max
Fluke TL81A Deluxe electronic test lead set; 22 of the most
useful accessories for making measurements in low energy,
electronic applications
C115 Deluxe carrying case with shoulder strap
80BK Type K Integrated DMM Probe
2318
S$
1+
780·00
S$
S$
Price per
unit
OM
S$
1+
559·00
S$
S$
S$
S$
Combines the rugged 179 true-rms digital multimeter and
the 322 AC current clamp. Together they provide the ability
to troubleshoot electrical and electromechanical problems
Fluke 179 True RMS digital multimeter with temperature,
frequency and capacitance measurement
Fluke 322 AC 400amp current clamp
80BK-A thermocouple probe
TL75 test leads
AC72 alligator clips
Note: For full product specifications see individual products
451-8678 & 543-314
S$
Price per
OM
S$
1+
587·00
unit
Fluke 179/61 Kit
1 Fluke 179 True RMS Digital Multimeter
6000 count LCD, large backlit display, 0.09% basic
accuracy, VDC, VAC, ADC, AAC, resistance, capacitance,
temperature, frequency, min/max/avg feature
Fluke 61 Infrared Laser Thermometer
-18°C to 275°C (0°F to 525°F), laser targeting, backlit LCD,
shock absorbing holster
TL75 Test Leads
80BK integral Test Probe
C800 Durable Carry Case
HVAC and facility maintenance kit with DMM and 61 IR
thermometer.Kit Contains:
Contact RS for calibration requirements
Stock no.
471-6872
Price per
unit
OM
S$
1+
679·00
S$
S$
Fluke 116/322 HVAC Combo Kit
Handy Kit for the HVAC professional including :
16 Multimeter
322 Clampmeter
TL75 Hard-Point Test Lead Set
ToolPak Magnetic Meter Hanging Strap
C115 Deluxe carrying case with shoulder strap
80PK-11 Velcro Pipe-clamp Thermocouple
80AK-A Thermocouple adaptor
80PK-1 Thermocouple bead probe
Contact RS for calibration requirements
Fluke 87V AEK
95
unit
OM
True RMS measurements
0.09% Basic DC Accuracy
6000 Count Digital Display
Min./Max./Average recording
Frequency and Capacitance measurements
Temperature Measurement
TL224 SureGrip Silicone Test Lead Set
1.5m test leads with safety shrouded standard diameter
banana plugs
TL910 Electronic Test Probe Set
Very Small 1mm tips to access hard to reach test points
with replaceable steel and spring loaded gold tips
AC280 SureGrip Hook Clip Set
One pair (red, black). Profile narrows to 5.6mm at tip, hook opening 6.4mm at front, 2mm at base
80BK Integrated DMM Temperature Probe
Type-K thermocouple with standard banana jack
679-2461
Combines the rugged, high specification Fluke 87V
multimeter with the i400 AC current clamp.
Fluke 87V
Fluke i400 AC 400amp current clamp
80BK-A thermocouple bead probe
TL75 test leads
AC72 alligator clips
Note: For full multimeter specifications see individual
product 480-2355
679-2465
Price per
Fluke 179 / EDA2 Electronics Combo Kit
Stock no.
Fluke 87V/IMSK Industrial Service Kit
Stock no.
Electronics
87
Fluke 179/IMSK Industrial Service Kit
Industrial combo kit comprising the
Fluke 87V-V multimeter, i410 ac /dc
current clamp and C115 soft case
The Fluke 87V has measurement
functions, trouble-shooting features,
resolution and accuracy for problem
solving on motor drives, in plant
automation, power distribution and
electro-mechanical equipment
The Fluke i410 current clamps
extends the current measurement
capabilities up to 400A ac / dc
C115 soft carry case includes two padded pockets for protection of two test tools, such as the 87V
DMM and the i410 Current Clamp and also a pouch for test leads and other accessories
Note: For details of the Fluke 87V True RMS industrial multimeter see stock no. 480-2355
For details of the Fluke i410 400A ac/dc current clamp see stock no. 237-4218
Supplied with: 87-V multimeter with protective holster, i410 current clamp, C115 soft carry case TL75
test lead set, AC72 crocodile clips, 80BK thermocouple temperature probe, two 9V PP3 batteries & and
instructions
Stock no.
250-365
Stock no.
Fluke 87V / i410 Industrial Combo kit
Description
Stock no.
S132-176
Model 87-V/E Kit bundles the 87-V with special
accessories to make troubleshooting even more
productive.
1.5m heat resistant silicone test leads
Removable test probes with 4mm of exposed metal for
use on industrial circuits
Retractable long reach alligator clips
Magnetic hanger to position and hold meter to steel
surfaces
Kit consists of: 87-V Multimeter, soft carry case, TL224
test leads, 80BK temperature probe, TL910 lead kit, H80M
Holster
Contact RS for calibration requirements
Stock no.
Specific Application
Series
OM = Order Multiple a New product to range
S$
Stock no.
372-140
Price per
unit
OM
S$
1+
515·00
Fluke 179 / MAG2 Industrial Combo Kit
True RMS measurements
0.09% Basic DC Accuracy
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
Fluke Accessories
6000 Count Digital Display
Min./Max./Average recording
Frequency and Capacitance measurements
Temperature Measurement
Fluke Multimeter Test Leads and Probes
TL224 SureGrip Silicone Test Lead Set
1.5m test leads with safety shrouded standard diameter banana plugs
AC220 SureGrip Alligator Clip Set
One pair (red, black) of small insulated jaws, open up to 9.5mm
TP4 Slim Reach Test Probe Set (4mm)
One pair (red, black) for probing closely spaced or recessed terminals
80BK Integrated DMM Temperature Probe
Type-K thermocouple with standard banana jack
Maglite flashlight
Description
Stock no.
Industrial Combo Kit (FL 179)
Sa132-182
Price per
unit
OM
S$
1+
705·00
S$
S$
Fluke 117/322 Electricians Combo Kit
The Fluke Electrician’s Combo kit is the perfect solution to meet
the demands of Electrical Professionals. This combo kit pairs the
new Fluke 117 DMM with a Fluke 322 clamp meter for productive
and effective troubleshooting in one total solution, including the
new C115 durable soft carrying case for protection and easy
meter transportation.
Fluke 117 Key Features
VoltAlertTM Technology for intergrated non-contact voltage
detection
AutoVolt feature for automatic AC/DC voltage selection
Large white LED backlight
LoZ: Low input impedance to eliminate stray voltage
Fluke 322 Compact Clamp Meter
Accurate low current measurements
ToolPak Magnetic Meter Hanging Strap
Carrying Case
Fluke 322 Clamp Meter Key Features
Small body and jaws fit perfectly in your hand and into tight spaces
Controls positioned for one hand operation
Display hold for later reference
Accurate low current measurements
Auto shut-off
Combo Kit Includes
117 True-rms digital multimeter with non-contact voltage detection
322 Compact clamp meter
4 mm lantern tip probe and test lead set
ToolPak Magnetic Meter Hanging Strap
C115 Deluxe carrying case with shoulder strap
Note: See Stock no. 616-1460 for full Fluke 117 specification.
Contact RS for calibration requirements
Stock no.
Price per
616-1482
unit
OM
S$
1+
515·00
Description
S$
S$
Fluke 289/IMSK Industrial Service Kit
Combines the advanced data logging capabilities of the
Fluke 289 multimeter (with "Trendcapture"), with the i400 AC
current clamp; together they provide the ability to
troubleshoot most industrial electrical problems.
Fluke 289 advanced data logging digital multimeter
Fluke i400 AC 400amp current clamp
TL71 silicone test leads
AC72 alligator clips
Note: For full multimeter specifications see individual
product 156-730
Stock no.
679-2468
Price per
unit
OM
S$
1+
1191·00
TL71-1 Premium Test Lead and
Probes Set: 1 pair (red, black)
comfort grip probes with integral
silicone insulated leads with 90°
shrouded plugs. Lead length 1.5m.
Meets EN61010-2-031 CATII 1000.V.
10A rated
TL75-1 Hard Point Test Lead Set: 1 pair (red, black) probes with integral PVC insulated leads
with 4mm 90° shrouded plugs. Lead length 1.5m. Meets EN61010-2-031 CATII 1000V. 10A rated
TL76 All-in-one Test Lead Set: 1 pair (red, black) 1.5 meter test leads with 90° angle shrouded
banana plug, removable lantern tip and insulated IC caps. Meets CAT IV 600V, CAT III 1000V, 10A
rating, UL listed
TL220-1 SureGripᓽ Industrial Test Lead Kit: Includes AC220 Alligator Clip Set, TP220 Test
Probe Set, TL222 Silicone Test Lead Set (right to right). Meets CAT IV 600V, CAT III 1000V, 10A
rating, UL listed
TL221 SureGripᓽ Extension Lead Set: 1 pair (red, black) of silicone insulated leads with straight
connectors on both ends. Includes 1 pair (red, black) female couplers. Meets CAT IV 600V, CAT III
1000V, 10A rating, UL listed
TL223-1 - Fluke SureGrip Electrical Test Lead Kit:AC220 SureGrip Alligator Clip Set. TP1 SlimReach Test Probes (Flat Bladed). TL224 SureGrip Silicone Test Lead Set (Straight to right)
TLK220 SureGripᓽ Accessory Kit: Includes AC220 alligator clip set, AC285 large jaw alligator
clip set, TP74 slim reach test probe set (4mm), TL224 silicone test lead set, zippered soft case with
moveable divider (can hold meter)
TL222 SureGripᓽ Silicone Test Lead Set: DMM test leads (red, black) with safety shrouded,
standard diameter banana plugs, 90° connector on both ends. Meets CAT IV 600V, CATIII 1000V,
10A rating, UL listed
TL225 SureGripᓽ Stray Voltage Adapter Test Lead Kit: SV225 Stray Voltage Eliminator,
TL224 SureGripᓽ Silicone Test Lead Set (right to straight), TP220 SureGripᓽ Test Probe Set, C75
Accessory Case
TLK225-1 SureGripᓽ Master Accessory Kit: Includes AC220 Alligator clip set, AC280 hook clip
set, AC283 pincer clip set, AC285 large jaw alligator clip set, TP220 test probe set, TL224 silicone
test lead set, 6-pocket storage pouch
TP220 Industrial Probes: 1 pair (red, black) of Industrial test probes; Sharp, 12 mm stainless steel
tip provides reliable contact; Flexible finger barrier improves grip; Recommended for use with
TL222 and TL224 test leads; CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed; One year warranty
TP1 Slim Reach Test Probe (flat blade): One pair (red, black) slender probes
TP2 Slim Reach Test Probe (2 mm): One pair (red, black) slender probes
TP38 Slender Probes: 1 pair (red, black) stainless steel tip probes with 4mm exposed tip.
Shrouded 4mm socket termination fits TL21A or TL22 test leads
L215 SureGrip Kit with Probe Light and Extender: L200 Probe light, TP280 20cm Test Probe
extenders, TP220 SureGrip Test Probes, TL224 SureGrip Silicon Test Lead Set, Foldable soft pouch
with six pockets and hook and loop
AC220 SureGripᓽ Alligator Clip Set: One pair (red, black) of small, insulated, nickel plated
jaws. Blunt tip grabs round screw heads up to 9-5mm
AC285 SureGripᓽ Large Jaw Alligator Clip Set: One pair (red, black) of large alligator clips
with nickel-plated steel jaws. Multi-purpose tooth pattern grips anything from fine gauge wire to a
20mm bolt
S$
S$
Stock no.
a726-3624
468-7415
a726-3633
449-9870
449-9892
468-7263
a726-3649
a726-3630
384-8265
468-7358
449-9915
451-1431
a726-3655
TL75-1 Hard Point Test Lead Set
TL76 Test Lead
TL220-1 Ind. Test Lead Kit
TL221 Extension Leads
TL222 Test Lead Set
TLK220 Accs Kit
TLK225-1 Master Accessory Kit
TP220-1 Ind. Probe Set
TP38 Slender Probes
L215 Light Probe
AC220 Alligator Clips
AC285 Large Alligator Clips
AC172 Alligator Clip Set
Stock no.
TP175E Probes
TL175E Test Leads
C800 Case
TL224 Test Leads
80BK Temperature Probe
TL910 Lead Kit
H80M Holster
480-2383
450-2358
480-2399
456-0427
480-2406
Price per
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
86·40
44·10
67·20
99·80
72·90
S$
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
39·60
50·00
127·00
44·10
44·10
223·00
255·00
25·50
28·80
148·00
61·40
36·40
33·90
S$
S$
S$
S$
TP175 and TL175 TwistGuardᓽ Test
Probes
Description
Stock no.
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
OM
Patented twist top test probes to extend or reduce tip
exposure
Probes always show correct category rating for tip
exposure being used
Includes removable 4 mm lantern tips
Compatible with all instruments that accept standard 4
mm shrouded banana plugs
EN61010-031 safety ratings: CAT III 1000 V, CAT IV 600 V,
CAT II 1000 V, 10 A max
Note: TL175E Test Probe and lead set includes 1.2m silicone
test leads with lead wear indication
Individual Replacement Case and
Accessories for the Combo Kits
Description
Price per
S$
S$
705-1285
705-1276
Price per
unit
unit
OM
S$
1+
1+
26·10
50·00
Fluke Fused Test Probes
Fused test probe set comprising 1 red & 1 black probe
Probes allow indication of live voltage even with blown
fuse.
2 mm threaded probe tips include removable 4 mm
lantern-style spring contacts and removable GS38
insulated IC caps for probing closely spaced leads
CAT III 1000 V, CAT IV 600 V, 10 A rating
Fitted with 11A, 1000V quick acting HBC 10.3mm x 38mm
fuses
Note: Fused Test Probe and lead set includes Fluke TL224
1.5m silicone test leads
New products available online every week
95
2319
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Description
Stock no.
FTP Fused Test Probe Set
FTPL Fused Probe & Lead Set
705-0765
705-0759
Price per
OM
unit
unit
S$
S$
S$
1+ 146·00
1+ 166·00
Meter holster C10
Meter case C12A
Meter case C20
Meter case C25
Meter case C50
Meter case C90
Meter and accessory case C789
Price
per
OM
S$
205-845
252-4570
611-335
617-024
106-6017
610-124
176-4777
unit
unit
unit
unit
unit
unit
unit
1+
1+
1+
1+
1+
1+
1+
49·90
49·90
97·90
63·30
61·40
61·40
208·00
S$
S$
Rugged cases for protecting Fluke handheld test tools in extreme
work environments.
Unbreakable, watertight, airtight, dustproof, chemical resistant
and corrosion proof
IP Rating: IP67: Case Material: Polypropylene copolymer
Automatic purge valve for quick equalization after changes in
atmospheric pressure
CXT80: For use with Fluke 80 Series, 187/189 and model 27
digital multimeters
CXT170: For use with Fluke 170 Series, 114/115/116/117, 77III,
and 77IV digital multimeters
CXT280: For use with Fluke 287 or 289 True-RMS multimeters
Dimensions and weight 270 x 246 x 124 mm: 1.25 kg
Note: Test leads and instrument not supplied
Stock no.
Extreme Case CXT170
Extreme Case CXT80
Extreme Case CXT280
665-4701
665-4707
665-4710
Price per
unit
unit
unit
1A
3A
10 A
15 A
20 A
OM
S$
1+
1+
1+
315·00
315·00
315·00
13/32x1-3/8in.
440mA
13/32x1-1/2in. 11A
Price
per
OM
440 mA
201-0251
unit
1+
26·30
11A
301-2416
unit
1+
26·30
S$
S$
S$
S$
459-7918
459-7924
unit
unit
S$
5+
5+
12·70
29·50
Fuses for Fluke Multimeters
HBC ceramic fuses recommended for Fluke Multimeters.
Approvals: UL; CSA
95
Compatibility
1A Fluke (Series III) 77, 79, 23, 26, 83, 85, 87, Fluke (Series IV) 78, 79
3A 25, 25, 8060A, 8062A
2320
Probe Type
Standards
Price per
125+
125+
125+
125+
125+
7·05
7·75
12·50
24·10
14·30
Plug-in
IEC1010 Cat II 300V
OM
unit
Current Rating
(mA)
Voltage Rating
(V)
440
1000
S$
S$
S$
S$
S$
1+ 237·00
Stock no.
a292-0653
Price
per
OM
S$
unit
1+
17·10
Test Lead Kit
a726-3652
Price per
unit
OM
S$
1+
291·00
S$
Fluke TLK287 Electronics Test and design
Lead Set
1000 V
OM
7·80
8·95
12·60
30·30
14·40
S$
440mA Fluke (Series III) 77, 79, 23, 26, 83, 97
Fluke (Series IV) 78, 79
11A
Fluke (Series III) 70, 23, 75, 77, 79, 21, 23, 26, 83, 85, 87
Fluke (Series GMM) 863, 867
440 mA
11 A
300 V
1m
Stock no.
Price per
60+
60+
60+
60+
60+
TLK282 Deluxe Automotive Test Lead Kit
Compatibility
Stock no.
8·90
12·00
16·30
39·40
18·30
S$
Kit contents
TP81 Insulations piercing clip set
Tl224 SureGrip silicone test lead
set
TP220 SureGrip test probe set
AC220 SureGrip alligator clip set
AC285 SureGrip large jaw alligator clip set
TP40 Automotive back probe pins (five)
AC280 SureGrip hook clip set
Soft case
Quick acting HBC multimeter fuses suitable for a variety of
models.,440mA,10.3 x 35mm 1000V a.c./d.c. 10kA.,11A,10.3 x
38mm 1000V a.c./d.c. 17kA.
Approvals: UL; CSA
Current (A)
5+
5+
5+
5+
5+
S$
Replacement fuses for all Series III Fluke
multimeters and graphic multimeters 863 and 867B
Fluke Multimeter Series III/IV Fuses
Voltage
S$
Fluke - replacement fuses for series III
Type
Stock no.
unit
unit
unit
unit
unit
OM
Fluke TL81A Deluxe Electronic Set
324-5975
Quick acting HBC fuses suitable for use with Fluke 20, 70 & 80
Series III digital multimeters (DMM), also suitable for 860 Series
graphical multimeters (GMM) and older IEC1010 rated Fluke 80
series multimeters.,440mA 10.3 x 35mm 1000V a.c./d.c. 10kA
breaking capacity suitable for Fluke 75, 77, 79, 23, 26, 83, 85 & 87
(Series III) DMMs and 863 & 867 GMMS.,11A 10.3 x 38mm
1000V a.c./d.c. 17kA breaking capacity suitable for Fluke 70, 73,
75, 77, 79,21,23, 26, 83, 85 & 87 (Series III) DMMs.
Current
(A)
337-5278
337-5284
337-4916
337-5240
337-5256
Price per
Comprehensive set for use in low energy, electronic test
applications that require fine probing. Compatible with Fluke
and most other multimeters,Supplied in a handy vinyl soft
wallet.
1.0m silicone lead terminated at one end with 4mm
shrouded right angled plug and stainless steel test probe
on the other end. Rated 10A
Insulated crocodile clip. Rated 5A
Insulated probe tip extender. Rated 3A
1.0m silicone modular test lead terminated at one end
with 4mm shrouded right angled plug and straight 4mm
on the other end. Rated 10A
Modular hook-style clip test lead with 4mm connector.
Rated 5A
Modular pinch style clip with 4mm connector. Rated 5A
Modular crocodile clip with 4mm connector. Rated 5A
Slide on IC probe tip adaptor (rated 3A) and test lead couplers
2 bare spade plugs with 4mm connectors, rated up to 10A, 60V dc max
TL81A contents 2 each (1 red and 1 black):
Stock no.
Fluke Series III/IV Multimeter Fuses
Description
Stock no.
10·3x34·9
10 x 34.9
10·3x38·1
10·3x38·1
10·3x38·1
Voltage
Cable Length
Fluke Extreme Carry Cases
Description
600 V
Current (A) Fuse Size (mm)
C10 Meter Holster: Snap on yellow shock absorbing
holster
C12A Meter Case: Zippered softcase with inside pockets
& belt loop. Size 170x127x38mm
C20 Meter Case: Heavy duty hard plastic case with
accessory compartment. Size 254x152x102mm
C25 Meter Case: Zippered soft case with padding and
inside pocket. Size 220x120x 60mm
C50 Meter Case: Compact zippered soft case with inside
pocket, belt loop and inside meter strap. Size
190x89x36mm
C90 Meter Case: Zippered soft case with inside pocket, belt loop and inside meter strap. Size
203x89x64mm
C789 Meter and Accessory Case: Large fabric case with 3 compartments, removable handle
and shoulder strap. Size 246x132x69mm
Stock no.
Fluke (Series ii) 73, 75, 77, 79, 21, 23, 29, 83, 85, 87
Fluke 25, 27
Voltage
Cases and Holsters
Description
15A
20A
S$
75+
75+
9·50
29·40
S$
125+
125+
4·90
29·30
Kit Contents:
Modular 4mm test leads (black and red)
Modular Probes (black and red)
Medium crocodile clips (black and red)
Spade lug/banana jack plated, set
Couplers IEC1010 (black and red)
TL910 precision electronic probe set with multiple springloaded 1mm diameter sharp tips to maximize contact with
SMD test points
Minigrabber with integral leads and 4mm shrouded plugs
(black and red)
Micrograbbers (black and red) for fine SMD test
Micrograbber leads (black and red)
Quadfold Carry Pouch
Ratings
Modular test leads and probes
TL910 Precision electronic probes*
Test lead couplers for long leads
Crocodile clips
Minigrabbersᓼ
Micrograbbersᓼ
Micrograbberᓼ leads
* except with 3 in (76.2 mm) tip which is 33 Vrms/70 Vdc
OM = Order Multiple ➤ Indicates more pricing available online a New product to range
CAT III, 1000V, 10A
CAT III, 1000V, 10A
CAT III, 1000V, 10A
CAT II, 300V, 5A
CAT II, 300V, 5A
33 Vrms / 70 Vdc, 2A
33 Vrms / 70 Vdc, 2A
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Stock no.
412-119
Multimeters
Price per
OM
unit
S$
S$
S$
1+ 242·00
Fluke TLK289 Industrial Test Lead Kit
Kit Contents:
TL224 1.5 metre silicone-insulated modular test leads
TP74 modular probes with banana-style spring contacts
with nickel-plated brass ends
AC220 crocodile clips (black and red)
AC280 hook clips (black and red)
AC285 large crocodile clips (black and red)
TPAK magnetic hanging Kit
80BK-A type K bead thermocouple with integral 4mm shrouded plug connections. For multimeters
with temperature measurement function. Measurement range:-40 to 260°C
C116, Soft carry case with moveable divider to protect the DMM and accessories
Recommended for use with Fluke 87V, 116, 179, 187, 189, 287, 289, 1587 multimeters
Ratings
AC220 crocodile clips
AC285 Large crocodile clips
TL224 test leads
TP74 modular probes
AC280 Hook clips
Stock no.
a412-129
Price per
OM
S$
1+
232·00
S$
S$
S$
S$
S$
S$
Test Clips
Test Clip Set 1000 Cat III
A pair of push on insulated crocodile clips complying to IEC1010 Cat
III 1000V for use with the latest Cat III 1000V Fluke 80 series
multimeter test prods.
Note: Suitable for: 83,85 and 87 1000V Cat III models
Stock no.
264-7881
Price per
1 pair
OM
S$
1+
25·30
Test Clip Set
A pair of push on insulated crocodile clips suitable for use with Fluke
10/70/80 series multimeter test prods.
Suitable for 21, 23, 27, 73, 75, 77, 85 and 87 models
Stock no.
816-170
Price per
OM
1 set
1+
S$
1000V
0.1mV
±1.2%
+4 D
400mV
1000V
0.1mV
500Hz
Current Accuracy
Safety
Series
Specific Application
Temperature Measurement
Voltage Accuracy
Stock no.
S263-2643
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
dc: 0.2 %
EN 61010-1 CAT III 1000V
FL787
Process
No
dc: 0.1 %
Price per
unit
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Stock no.
S447-7707
18·50
±0.1%
+1 D
4V
1000V
0.001V
±7%
+4 D
400mV
1000V
0.1mV
20kHz
Price per
unit
Agilent
Agilent U1241B & U1242B
Multimeters
Price per
1 set
OM
S$
1+
61·40
S$
S$
Fluke Process Meters
Fluke 787 ProcessMeterᓽ
The Fluke 787 ProcessMeterᓽ combined loop calibrator and digital multimeter
is a rugged instrument for troubleshooting and calibrating current loop
applications.
Precision 1000V, 440mA digital multimeter measure a.c. and d.c. volts, a.c.
and d.c. current, resistance, continuity and frequency.
True r.m.s. a.c. voltage measurement to 1kHz
Frequency to 20kHz
Min./Max./Peak Hold/Hold/Relative modes
Diode test and Continuity Beeper
d.c. current source/loop calibrator/20mA current source/simulator/% of scale
readout
Manual Step, Auto Step, Auto Ramp
Clear LCD with backlight; 4000 counts; 30000 counts for d.c. current
Externally accessible battery
Closed-case, software calibration
Designed to meet 1000V IEC 1010 Cat III 1000V
Contact RS for calibration requirements
Supplied with: protective yellow holster with Flex-Standᓽ, safety-designed test lead set, 9V alkaline
battery (installed), users manual and quick reference guide.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
±0.1%
+1 D
400mV
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
S$
1+
1338·00
S$
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
Resistance Accuracy
Resistance Digits
SureGrip Pincer Clip Set
455-0559
OM
S$
The Fluke 789 ProcessMeter is a combined digital multimeter and loop calibrator.
Precision 1000V, 440mA digital Multimeter measures a.c. and d.c. volts, a.c.
and d.c. current, resistance, continuity and frequency.
d.c. mA current source / loop calibrator / 20mA current source/ simulator / % of
scale readout
True r.m.s. a.c. voltage measurement
Frequency measurement to 20kHz
Min./ Max./Peak Hold/Hold/Relative modes
24V loop power supply
Manual Step, Auto Step, Auto Ramp
0% and 100% buttons to toggle between 4 and 20mA
1200 Ohm drive capability on mA source
HART mode setting with loop power incorporating 250 Ohm resistor
Externally accessible battery
Diode test and Continuity Beeper
Large dual display LCD
4000 display count
2 brightness settings for backlight
Supplied with: TL75 test lead set, AC72 crocodile clips, four AA alkaline batteries (installed), user
manual (CD-ROM), Quick reference guide.
Contact RS for calibration requirements
SureGrip accessories are designed to improve steadiness in
slippery hands. The rubber overmolded surfaces and fingerhugging curves give the user a comfortable, reliable grip on the
accessory.
One pair (red, black) of nickel plated pincers open to 5mm
11.4cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CAT IV 600V Cat III 1000V 1A rating. UL listed
Stock no.
1A
1μA
±1%
+2 D
1A
1μA
2kHz
±0.2 %
+1 D
Fluke 789 Combined Multimeter and Loop
Calibrator
CAT IV 600 V, CAT III 1000 V, 10 A
CAT IV 600 V, CAT III 1000 V, 10 A
CAT IV 600 V, CAT III 1000 V, 10 A
CAT III 1000 V, 10 A
CAT IV 600 V, CAT III 1000 V, 3 A
unit
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
±0.2%
+2 D
30mA
OM
S$
1+
1532·00
±0.05%
+2 D
30mA
1A
1μA
±1%
+2 D
1A
0.001A
±0.2%
+2 D
S$
S$
10,000 count back lit display with analogue bargraph
Autoranging with MIN/MAX recording and HOLD
True RMS Vac and Aac measurement
Resistance, capacitance, frequency, continuity, diode test
Type K thermocouple input temperature measurement: (Requires U1180A
thermocouple adaptor)
Safety Rating EN61010-1CAT IV 600V, CAT III 1000V
Dimensions: 193.8 x 92.2 x 58.0 mm; Weight 450g
U1242B Additional Features:
Stores 100 data points manually or logs data up to 200 data points
Switch counter for detecting and counting switch, relay or pushbutton contact
bounce
0 - 99.9% Harmonic ratio measurement (40 to 500Hz) to verify the presence of
harmonics in AC signals
Dual Type K thermocouple inputs: providing dual / differential temperature
measurement
Note: U1174A soft carry case available separately see stock no. 501-314
U1180A thermocouple adapter and type J & K bead thermocouple set available separately see stock
no. 501-336
Supplied with: Test lead set, 4 AAA alkaline batteries, certificate of calibration and instructions on
CDROM
Function
Measuring Ranges
Basic accuracy
Range resolution
±0.09%
0.1 mV → 0.1 V
DC Voltage
1000 mV → 1000 V
±1%
0.1 mV → 0.1 V
AC Voltage
1000 mV → 1000 V
±0.5%
0.1μA → 0.001 A
DC Current
1000 μA → 10A
AC Current
1000 μA → 10A
±1%
0.1μA → 0.001 A
±0.3%
0.1 Ω → 0.01 MΩ
Resistance
1000.0 Ω → 100.00 MΩ
Capacitance
1000.0 nF → 10.000 mF
±1.0%
0.1 nF → 0.001mF
±0.03%
0.01Hz → 0.1 kHz
Frequency
100.00 Hz → 1000.0 kHz
Temperature(Type K)
-40 °C → +1000 °C
±1%+ 1°C
0.1 °C
Description
U1241B
U1242B
Stock no.
S699-7357
699-7351
Price per
unit
unit
OM
S$
1+
1+
380·00
415·00
Many more leading brands from over 2,500 suppliers available online
S$
S$
95
2321
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Resistance
Accessories
Description
U 1174A Carry case
U1180A Thermocouple adaptor and
J/K thermocouples
Stock no.
Price
per
OM
S$
501-314
501-336
unit
unit
1+
1+
27·70
48·70
S$
S$
Capacitance
Frequency
Temperature (Type K)
Description
Agilent U1251A & U1252A
50,000 count USB I/F
Multimeters
678-0749
Price per
unit
OM
S$
1+
760·00
S$
S$
Agilent U1251B & U1252B
Multimeter, 50000 count,
USB interface
50,000 counts dual display with analogue bargraph & backlight
30kHz acV bandwidth
Auto ranging with MIN/MAX recording, peak & display HOLD
True RMS AC measurements
Resistance, capacitance, frequency, continuity, diode test
Type K thermocouple input temperature measurement: (Requires U1180A
thermocouple adaptor stock no. 501-336)
% scale of 4-20 mA for process loop applications
dBm / dBV measurement, duty cycle, & pulse width measurement
Manual and automatic data logging up to 200 points (U1173A Optical USB
interface cable available separately stock no. 501-320)
Safety rating: EN61010-1CAT III 1000V, CAT IV 600V
Dimensions: 94 x 204 x 59mm : Weight 0.5kg
95
Note: U1164A Fine tip test probe set see stock no. 661-2741
U1163A SMT grabber set see stock no. 661-2750
U1173A Optical USB interface cable is available separately see stock no. 501-320
U1174A soft carry case see stock no. 501-314
U1180A thermocouple adapter and type J & K bead thermocouple set is available separately see stock
no. 501-336
U1583B 400 Aac current clamp adaptor see stock no. 699-7376
Supplied with: Application software, test leads, crocodile clips, certificate of calibration, user manual
on CD ROM, 9V alkaline battery (U1251B only), rechargeable Ni-MH battery with power adapter
(U1252B only)
Function
Measuring Ranges
Basic accuracy
Range resolution
±0.03%
0.001 mV → 0.1V
DC Voltage
U1251B
50.000 mV → 1000.0 V
±0.025%
U1252B
AC Voltage
U1251B
50.000 mV → 1000.0 V
±0.6%
0.001 mV → 0.1V
U1252B
±0.4%
DC Current
U1251B
500.00 μA → 10.000 A
±0.2%
0.01 μA → 0.001 A
U1252B
±0.15%
AC Current
U1251B
500.00 μA → 10.000 A
±0.8%
0.01 μA → 0.001 A
U1252B
±0.7%
2322
OM = Order Multiple
Stock no.
S699-7360
699-7363
U1251B
U1252B
Fully featured digital multimeters with comprehensive measurement functions
and optical USB interface. The advanced functionality included provides for
maximum versatility in R&D, maintenance & service applications.
Bright backlit LCD dual display with analogue bargraph
50,000 counts resolution on both displays
0.03% basic DC voltage accuracy
Auto-ranging with MIN/MAX recording, peak & display HOLD
True RMS AC measurements
Resistance, frequency, continuity, diode test
10nF to 100mF capacitance range
Type K thermocouple input temperature measurement: -200°C to +1370°C
range (Requires thermocouple adaptor)
% scale of 4-20 mA for process loop applications
dBm/ dBV measurement
Duty cycle, & pulse width measurement
Manual and automatic data logging up to 200 points
Optical USB interface (U1173A Optical USB interface cable available separately)
CAT III 1000 V safety protection
Robust over-moulded design with multi-function tilt stand
Complies with EN61010-1CAT IV 600V safety rating
Dimensions: 94mm x 204mm x 59mm : Weight 0.5kg
U1252A Additional Features:
Note: U1173A Optical USB interface cable is available separately see stock no. 501-320
U1180A thermocouple adapter and type J & K bead thermocouple set is available separately see stock
no. 501-336
Supplied with: Soft carrying case, data logging software, test leads, crocodile clips, SMT grabbers,
mini grabber, fine tip test probes, 9V alkaline battery, user manual on CD ROM
0.025% basic DC voltage accuracy
100kHz acV bandwidth
True RMS AC+DC measurements
20 MHz frequency counter
Programmable square wave generator for stimulation of electronic digital circuits
Rechargeable battery with built-in battery charger
Support for both K type & J type thermocouples
U1251A
U1252A
1μV
DC Voltage Lowest Resolution
1μV
1μV
AC Voltage Lowest Resolution
100μV
DC Current Lowest Resolution
500μA
500μA
AC Current Lowest Range
10nA
10nA
AC Current Max Frequency
20kHz
100kHz
Resistance Lowest Range
500Ω
500Ω
Resistance Highest Range
500MΩ
500MΩ
Capacitance Accuracy
±1%
±1%
Capacitance digits
5
5
Capacitance Lowest Range
10nF
10nF
Capacitance Highest Range
100mF
100mF
Stock no.
U1251B
U1252B
U1251B
U1252B
U1251B
U1252B
U1251B
U1252B
500.00 Ω → 50.000 MΩ
500.00 Ω → 500.00 MΩ
10.000 nF → 100 .00mF
±0.08%
±0.05%
±1.0%
0.01Ω → 0.001MΩ
0.01Ω → 0.01MΩ
0.001 nF → 0.01 mF
99.999 Hz → 999.99kHz
±0.02%
0.001Hz → 10Hz
-200 °C → +1372 °C
±0.3%
0.1 °C
Price per
OM
S$
1+
1+
720·00
770·00
unit
unit
S$
S$
Agilent U1253A DMM,
50000 count, USB interface
Organic Light Emitting Diodes (OLED) display with analogue bargraph giving
bright colour display with a wider viewing angle than LCD displays and no need
for a backlight.
50,000 counts resolution on both displays
0.025% basic dcV accuracy
100kHz acV bandwidth
Auto ranging with MIN/MAX recording, peak & display HOLD
True RMS AC+DC measurements
Resistance, capacitance, frequency, continuity, diode test
Type J & K thermocouple input temperature measurement: (Requires
thermocouple adaptor)
% scale of 4-20 mA for process loop applications
dBm/ dBV measurement, Duty cycle, & pulse width measurement
20 MHz frequency counter
Programmable square wave generator for stimulation of electronic digital
circuits
Manual and automatic data logging up to 1000 internal memory points (internal) or to external
memory
Optical USB interface (U1173A Optical USB interface cable available separately)
Robust over moulded design with multi-function tilt stand
Complies with EN61010-1CAT IV 600V safety rating
Dimensions: 94mm x 204mm x 59mm : Weight 527g
Note: U1164A Fine tip test probe set see stock no. 661-2741
U1163A SMT grabber set see stock no. 661-2750
U1173A Optical USB interface cable is available separately see stock no. 501-320
U1174A soft carry case see stock no. 501-314
U1180A thermocouple adapter and type J & K bead thermocouple set is available separately see stock
no. 501-336
Supplied with: Data logging software, test leads, crocodile clips, rechargeable Ni-MH battery with
power adapter, certificate of calibration, user manual on CD ROM
Function
Measuring Ranges
Basic accuracy
Range resolution
±0.025%
1 μV → 100 mV
DC Voltage
50 mV → 1000 V
±0.4%
1 μV → 100 mV
AC Voltage
50 mV → 1000 V
±0.3%
0.01μA → 1 mA
DC Current
500 μA → 10A
±0.7%
0.01μA → 1 mA
AC Current
500 μA → 10A
Resistance
100 Ω → 500 MΩ
±0.05%
10 mΩ → 10 kΩ
Capacitance
10 nF → 100 mF
±1.0%
10 pF → 1μF
±0.02%
0.001Hz → 10Hz
Frequency
99.999 Hz → 999.99kHz
Temperature (Type K)
-200 °C → +1372 °C
±0.3%
0.1 °C
Stock no.
678-0755
Price per
unit
OM
S$
1+
770·00
S$
S$
Agilent U1253B Multimeter,
50000 count, USB Interface
Ultra bright (OLED) wide angle display with analogue bargraph
50,000 counts dual display:
Auto ranging with MIN/MAX recording, peak & display HOLD
True RMS AC+DC measurements
Resistance, capacitance, frequency, continuity & diode test
Type J & K thermocouple input temperature measurement: (Requires
thermocouple adaptor)
% scale of 4-20 mA for process loop applications
dBm/ dBV measurement, Duty cycle, & pulse width measurement
20 MHz frequency counter & square wave generator
Manual and automatic data logging internally to DMM and externally to PC
Optical USB interface (U1173A Optical USB interface cable available
separately)
Complies with EN61010-1CAT IV 1000V safety rating
Dimensions: 94mm x 204mm x 59mm : Weight 527g
Note: U1164A Fine tip test probe set see stock no. 661-2741
U1163A SMT grabber set see stock no. 661-2750
U1173A Optical USB interface cable is available separately see stock no. 501-320
U1174A soft carry case see stock no. 501-314
U1180A thermocouple adapter and type J & K bead thermocouple set is available separately see stock
no. 501-336
U1583B 400 Aac current clamp adaptor see stock no. 699-7376
Supplied with: Quick reference guide, test leads, crocodile clips, rechargeable Ni-MH battery and
power adapter
Function
Measuring Ranges
Basic accuracy
Range resolution
DC Voltage
50 mV → 1000 V
±0.025%
1 μV → 100 mV
±0.4%
1 μV → 100 mV
AC Voltage
50 mV → 1000 V
±0.3%
0.01μA → 1 mA
DC Current
500 μA → 10A
±0.7%
0.01μA → 1 mA
AC Current
500 μA → 10A
±0.05%
10 mΩ → 10 kΩ
Resistance
100 Ω → 500 MΩ
Capacitance
10 nF → 100 mF
±1.0%
10 pF → 1μF
Frequency
99.999 Hz → 999.99kHz
±0.02%
0.001Hz → 10Hz
±0.3%
0.1 °C
Temperature(Type K)
-200 °C → +1372 °C
Description
U1253B
Stock no.
699-7367
Price per
unit
OM
S$
1+
840·00
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
Agilent Accessories
Agilent U1180A
Thermocouple Adaptor and
J/K Thermocouples
U1180A thermocouple adapter and lead set compatible with
the U1240A & U1250A series multimeters.
T/C Bead - J Type: Temperature rating (wire) -20°C - 200°C
T/C Bead - K Type: Temperature rating (wire) -20°C - 200°C
Includes a J/K type thermocouple adapter, thermocouple bead
J-type and a thermocouple bead K-type.
Stock no.
Price per
501-336
OM
S$
1+
48·70
unit
S$
S$
Agilent U1174A Multimeter
Carry Case
Soft carrying case with zipper for Agilent handheld
digital multimeters.
Dimension: 228mm x 127m x 76mm
Stock no.
501-314
Price per
OM
S$
1+
27·70
unit
S$
S$
Agilent U1173A Optical USB
Interface Cable
IR - USB PC connectivity cable compatible with the
U1250A series handheld digital multimeters
Maximum baud rate: 19200 bits per second
Operating temperature: 0 - 50°C
Stock no.
501-320
Price per
unit
OM
S$
1+
41·80
Description
501-304
unit
512-4870
512-4915
Price per
unit
unit
OM
S$
1+
1+
580·00
940·00
S$
S$
S$
MX 57CEx 50,000-count
TRMS Digital Multimeter
Extension test leads compatible with the U1240A &
U1250A series digital multimeters.
Includes 2 extension test leads (one red and one black), 2
test probes, medium sized alligator clips and 4 mm
banana plugs.
Extension Test Leads: Cat III 1000V, 15A
Test Probes: Cat III 1000V, 15A
Medium Sized Alligator Clips: Cat III 600V, 10A
4mm Banana Plugs: Cat II 600V, 10A
Price per
Stock no.
MTX3281
MTX3282COM
Agilent U1161A Multimeter
Test Lead Set
Stock no.
Note: For a suitable USB adaptor please see RS 450-3238
Supplied with: Standard version: 3 AA alkaline batteries, test lead set & instructions
-COM version optical RS232 cable; SX-DIMM software; 3 AA NiMH rechargeable battery, test lead set
& instructions, mains adaptor/charger
-BT version Bluetooth wireless link: SX-DMM software; 3 AA NiMH rechargeable battery, test lead set
& instructions, mains adaptor/charger
Model MTX3283 currently not available
MTX 3281
DC Voltage Accuracy
±0.1%
DC Voltage Digits
8
DC Voltage Lowest Range
100mV
100mV
DC Voltage Highest Range
1000V
1000V
DC Voltage Lowest Resolution
1μV
AC Voltage Accuracy
±0.7%
±0.3%
AC Voltage Digits
40
40
AC Voltage Lowest Range
100mV
100mV
AC Voltage Highest Range
1000V
1000V
1μV
AC Voltage Lowest Resolution
1μV
AC Voltage Max Frequency
50kHz
200kHz
DC Current Accuracy
±0.08%
±0.08%
DC Current Digits
8
8
DC Current Lowest Range
1000μA
1000μA
DC Current Highest Range
20A
20A
DC Current Lowest Resolution
10nA
10nA
AC Current Accuracy (dc to 20kHz)
±1%
±0.3%
AC Current Digits
30
30
AC Current Lowest Range
1000μA
1000μA
AC Current Highest Range
20A
20A
AC Current Lowest Resolution
10nA
10nA
AC Current Max Frequency
20kHz
50kHz
Display Count
100,000
100,000
Resistance Accuracy
±0.1%
±0.07%
Resistance Digits
8
8
1000Ω
Resistance Lowest Range
1000Ω
Resistance Highest Range
50MΩ
50MΩ
Resistance Lowest Resolution
10mΩ
10mΩ
OM
S$
1+
58·50
S$
S$
Metrix
MTX 3000 Series, Graphical
Multimeters
High performance all in one multimeter for laboratory or
on-site use.
Large (58x58mm) 160 x 160 dot matrix multi-directional
LCD graphic screen with backlight.
Depending on the function selected results are displayed
in several ways:
* 4 x 100,000 count digital displays for simultaneous
display of associated measurements
* Mixed display mode combines a stable digital readout
with bargraph display of indicating rapid variations and a
graphic recorder displaying measurement variation over
time
3 input terminals with automatically selected measurements,
Full autoranging current measurement utilising one current input terminal
Simultaneous current & voltage measurements can be made using 3 measurement leads
8-way keypad mimics a "virtual" measurement switch providing "one-hand one-touch" ergonomics
Configuration menu & on-line help
Data acquisition up to 4 measurements at once - interval from 1s to 24h
4x150 measurements storage
SPEC function displays the reading and measurement tolerances (min and max) for complete
clarity of measurement uncertainties
SURV function: Surveillance and storage of "MIN", "MAX", and "AVG" values with time stamp
Manual hold of display (HOLD) or automatic hold on stable measurement (AUTOHOLD)
Frequency measurements up to 2 MHz, duration, cyclical ratio, events metering
10nF to 10mF capacitance ranges
Favourite measurement key assigned to any physical quantity (conversion & unit)
Dimensions and weight : 44 x 85 x 180 mm : 400 g.
Complies with IEC 61010-1 CAT IV 600V; CAT III 1000V
MTX3282 additional features
0.03% dcV basic accuracy; 100kHz bandwidth
AUTOPEAK mode provides fast autoranging for error-free measurements without crest factor
limitations
MATH function applies a user defined mathematical scaling to a measured value for direct display.
Temperature measurement from J, K type thermocouples and PT100 / PT1000 probes
Pulse counting up to 99,999, minimum duration 5μs
A high performance, intrinsically safe multimeter
classified for use in mines affected by fire damp (EEx ib I –
marking Ex I M2) and surface industries, zones 1 and 2
(gas) and zones 21 and 22 (dust) (EEx ib IIC T6 - marking
Ex II 2 G/D).
50,000-count display resolution
Fast 34 segment bargraph with zoom (x 5) or centre zero
function
True RMS alternating current measurements (AC or
AC+DC coupling)
MIN, MAX and Average value monitoring function
1ms fast peak-to-peak measurements (Peak + and Peak
-)
50 nF to 50 mF capacitance ranges
Continuity & diode test
Auto and manual ranging
0.62 Hz to 500 Hz Frequency (voltage or current) measurement range
Duty cycle, pulse width / timer
dB and U2/R resistive power functions (reference adjustable 1 Ω to 9999 Ω)
Robust, sealed IP67 casing
Complies with IEC 61010-1 CAT III 600V
0 ° to 50 °C operating temperature
Dimensions 189 x 82 x 40mm, weight 400 g
Supplied with: carry case, test lead set, Duracell Pro PP3 9V alkaline battery,1 spare intrinsic safety
fuse, operating manual.
Group & Category: EEx ib group I & EEx group IIC T6
Resistance Lowest Range
Resistance Highest Range
Resistance Lowest Resolution
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Stock no.
S157-626
500Ω
50MΩ
10mΩ
±0.25 %
2
500 mV
600 V
10 μV
±3 %
30
500 mV
600 V
10 μV
50 kHz
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
Display Count
Resistance Accuracy
Resistance Digits
Price per
unit
OM
S$
1+
1490·00
±0.2 %
2
500 μA
500 mA
10 nA
0.60% (40Hz to 5kHz)
30
500 μA
500 mA
10 nA
50000
±0.07 %
2
S$
S$
S$
S$
Metrix Multimeter Fuses
AT 0084 -suitable for MX53, MX54, MX55 and MX56.
Description
Stock no.
AT 0084 fuse
186-1569
Price per
unit
OM
S$
1+
16·70
Visit our website for additional price information and exciting promotions
95
2323
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Amprobe 5XP-A Multimeter
Amprobe
PM51A Shirt-Pocket DMM with
Frequency & Capacitance
This meter is only 10.2mm thick and weighs less than 80g, yet offers excellent
performance and high safety ratings.
Measures ac and dc voltage, resistance, continuity with beeper,
capacitance and frequency
Fully auto-ranging with 7 measurement functions and 27 ranges
Ratings of CAT III 300 V, CAT II 600V
Large 4000 display count LCD screen
Data hold
Auto power off
Optional holster and zippered carry case available
Note: This instrument is fitted with fixed test leads. Use of an alternative
instrument is advised where GS38 compliant fused leads are required.
Approvals: UL, CSA
Supplied with: Built-in battery, integral leads and instruction manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
Description
±2%
+2D
400mV
600V
1mV
±3.5%
+5D
Stock no.
S412-080
PM51A
Price per
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Resistance Accuracy
Resistance Digits
OM
S$
1+
63·30
OM
S$
1+
15·80
unit
4V
600V
1mV
500Hz
±1.5%
+4D
S$
S$
S$
S$
Accessories
Description
Stock no.
Carry Case
446-605
Price per
unit
PM55A Shirt-Pocket Precision
DMM with AutoTect & VolTect
10.2mm thick and weighs less than 80g
Measures ac and dc voltage to 600V, ac and dc current to 2000μA,
resistance to 6 MΩ, capacitance to 2000μF, frequency to 30kHz, diode test
and continuity with beeper
AutoTectᓽ feature directs the meter to know if it is measuring ac volts, dc
volts or resistance with no user interface required
The AutoTectᓽ feature has lower input impedence which zeros out ghost
voltages
Meter includes VolTectᓽ, which is a built-in, non-contact voltage detector
Complete user protection with full safety ratings of CAT III 300 V, CAT II
600V
Large 4000 count LCD screen
Data hold
Auto power off
Note: This instrument is fitted with fixed test leads. Use of an alternative instrument is advised where
GS38 compliant leads (fused test leads) are required.
Supplied with: Protective silicon holster, attached test leads, battery, deluxe carry case and
instruction manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
Display Type
Series
Safety
±1.5%
+5D
6V
600V
1mV
±1.5%
+5D
LCD
PM55
EN 61010-1 CAT II 600V, CAT III 300V
Description
Stock no.
PM55A
412-018
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Resistance Accuracy
Resistance Digits
6V
600V
1mV
60Hz
±2%
+4D
Maximum Voltage Measurement
Current Accuracy
Voltage Accuracy
Price per
OM
unit
S$
S$
600 Vac/dc
ac/dc: ±1.5 %
ac/dc: ±1.5 %
S$
1+ 106·00
Amprobe AM-240 Multimeter
A versatile mult-purpose digital multimeter capable of measuring
AC/DC Voltage up to 600V, AC/DC Current up to 10A,
Temperature, Resistance, Capacitance, Frequency and Duty Cycle.
Large Backlit 4000-count LCD Display
AC/DC microamps for sensor diagnosis
MAX, MIN and Relative measurements
Data Hold function
Audible Continuity Test
Diode Test function
Auto or Manual Ranging
Auto Power-off (can be disabled)
Tilt stand for bench use
Standards: CAT III 600V
AC/DC V
400mV 4.000/40.00/400.0/600 V
AC/DC A
400/4000μA 40/400 mA 4/10 A
Resistance
400.0 Ω 4.000/40.00/400.0 kΩ 4.000MΩ/40.00 MΩ
Capacitance
40.00/400.0 nF 4.000/40.00/400.0/4000μF
Frequency
10.00/ 100.0/1000 Hz 10.00/100.0/1000 kHz/10MHz
Duty Cycle
0.1% - 99.9%
Temperature
-58° to 1382°F (-50° to 750°C)
Specific Application
Series
General Purpose
AM-240
Stock no.
95
2324
543-336
Price per
OM
S$
1+ 106·00
DC Voltage Ranges
AC Voltage (45 Hz to 500 Hz)
Ranges
Voltage Resolution
Voltage Input Impedance
Overload Protection
100 μV
10 MΩ
200 mV: 1000 V dc or 750 V ac rms (3 minutes) All other ranges: 1000 Vdc or 750 Vac
rms
200 μA, 2 mA, 20 mA, 200 mA Accuracy: ± (1.5 % rdg + 1 digit)
200 μA, 2 mA, 20 mA, 200 mA Accuracy: ± (2.0 % rdg + 5 dgts)
0.1 μA
315 mA/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on mA input
300 mV max. (1 V max. on 200 mA range)
200 Ω , 2 kΩ , 20 kΩ , 200 kΩ Accuracy ±(1.0% rdg + 4 digits)
2 MΩ ± (1.5 % rdg + 4 dgts), 20 MΩ ± (2.0% rdg + 5 digits)
100 mΩ
0.3 V dc typical, (3.0 V dc on 200 Ω range)
1000 V dc or 750 V ac rms
75 Ω ± 25 Ω, Response Time: 100 ms
Approx. 1.0 mA, reading accuracy ±(1.5% rdg + 3 digits)
1 mV
3.0 V dc typical
Sense voltage 70 to 600 Vac; beeper
1.5 V, 9 V Accuracy: ± (3.5% rdg + 2 digits)
155 x 72 x 32 mm, 210 g (7.4 oz) including battery
Resistance Resolution
Open Circuit Voltage
Overload Protection
Continuity: Audible Indication
Diode Test Current
Diode Test Resolution
Open Circuit Voltage
Non-Contact Voltage Indicator
Battery Test
Size & Weight
Stock no.
412-096
Price per
unit
OM
S$
1+
88·00
S$
S$
DM7C Digital Multimeter
Compact General Purpose Multimeter for light, commercial or
automotive use.
31⁄2 digit LCD, 1999 counts display
6 functions/14 manual selection ranges
Diode Test
Protective holster included
Test function for 1.5V and 9V batteries
CAT II 600 V rated
Supplied with: Holster, 9V battery, users manual, test leads
DC Voltage Accuracy
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Range Resolution
AC Voltage Accuracy (40 to 1000 Hz)
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Range Resolution
DC Current Accuracy
DM7C
± (1.2 % rdg + 3d)
2V
600V
1mV
±(1.5 +3d)
200V
600V
100mV
± (2.5 % rdg + 3d)
Stock no.
S412-062
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Range Resolution
Resistance Accuracy
Resistance Lowest Range
Resistance Highest Range
Resistance Lowest Range Resolution
Dimensions & weight
Price per
unit
OM
S$
1+
68·20
S$
200mA
100μA
± (1.5 % rdg + 3d)
2kΩ
2MΩ
1Ω
170 x 85 x 50mm; 410g
S$
Kyoritsu Multimeters
1030 Pen Type Digital Multimeter
CAT III 600V
600 Vac/dc
S$
S$
Compact in Size, Light in Weight and Simple in Use.
Double moulding provides comfortable and good
feeling in hand.
Penlight illuminates brightly the point to be
measured, even in dark place.
Auto power-off function saves the battery life.
Unique wrapping mechanism for test lead in the rear
side compartment.
Unique protection mechanism for the test prod for
safety.
All ranges including Ohm range are protected against
overload voltage of 600V.
Standards: IEC61010-1: 2001 CAT.III 600V, IEC61010031, IEC61326-1
AC V
DC V
OM = Order Multiple
200 mV, 2 V, 20 V, 200 V, 1000 V Accuracy: ± (1.0% rdg + 1 digit)
200 mV, 2 V, 20 V, 200 V, 750 V Accuracy: ± (1.5% rdg + 5 digits)
DC Current Ranges
AC Current (45 Hz to 500 Hz)
Ranges
Current Resolution
Current Input Protection
Voltage Burden
Resistance Ranges
Description
Safety
Maximum Voltage Measurement
unit
The Amprobe 5XP-A digital multimeter provides superior features
and accuracy in a compact design. It has unique features such as
VolTectᓽ non-contact voltage (NVC) detection and the exclusive Magne-Gripᓽ
holster that frees both hands of the operator. The 5XP-A is the right choice for
residential, commercial and general troubleshooting applications.
31⁄2 digit liquid crystal display (LCD) with a maximum reading of 1999
VolTectᓽ non-contact voltage (NVC) detection
Automatic Polarity, positive implied, with negative polarity indication
Overrange indication (OL or -OL is displayed)
Auto-zero
Low Battery Indication
Measurement rate 2.5 times per second nominal
Operating Environment: 0 °C to 50 °C at <70 % R.H.
Storage Temperature: -20 °C to 60 °C, 0 to 80 % R.H. with battery removed
from meter
Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity
Temperature Coefficient 0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C
to 50 °C)
Standards: Cat I 1000V, Cat II 600V, Cat III 300V
4/40/400/600V(4 Range auto) ±1.3 % rdg ±5dgt (4/40V) (50/60Hz) ±1.6 % rdg ±5dgt (400/600V) (50/
60Hz)
400m/4/40/400/600V(5 Range auto) ±0.8 % rdg ±5dgt(-400mV-400V) ±1.0 % rdg ±5dgt(600V)
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Resistance Ω
Diode check
Continuity Check
Capacitance
Frequency
Duty
Data Hold
Battery voltage
warning
Auto power-off
Power Source
Dimensions
Weight
Accessories
Multimeters
1018H Digital Multimeter
400/4k/40k/400k/4M/40MΩ (6 Range auto) ±1.0 % rdg ±5dgt (400Ω-4MΩ) ±2.5 % rdg ±5dgt (40MΩ)
Test voltage approx. 0.3-1.5V
Buzzer sounds when resistance is 120Ω or less
50n/500n/5μ/50μ/100μF (5 Range auto)±3.5 % rdg ±10dgt(50nF) ±3.5 % rdg ±5dgt(500n-50μF) ±4.5 %
rdg ±5dgt(100μF)
5/50/500/5k/50k/200kHz ±0.1 % rdg ±5dgt (Measurable input: 1.5Vrms or more)
0.1-99.9%±2.5 % rdg±5dgt (Pulse width / Pulse cycle)
The measured value can be hold by pressing Data hold button
When the battery voltage drops to 2.4V±0.2V or less
627-8754
Price per
OM
unit
DC V
400mV/4/40/400/600V(Input Impedance 10MΩ) ±0.8 %
rdg ±5dgt(400mV/4/40/400V) ±1.0 % rdg ±5dgt(600V)
4/40/400/600V(Input Impedance 10MΩ) ±1.3 % rdg
±5dgt(4/40V) ±1.6 % rdg ±5dgt(400/600V)
10/100Hz/1/10/100/200kHz
400Ω/4/40/400kΩ/4/40MΩ ±1.0 % rdg ±5dgt(400Ω/4/
40/400kΩ/4MΩ) ±2.5 % rdg ±5dgt(40MΩ)
4V Release Voltage:Approx. 0.4mA Test Current
4nF/40nF/400nF/4μF/40μF/200μF
400Ω(Buzzer sounds below 120Ω)
3700V AC for 1 minute
LR44(1.5V) × 2
107(L) × 54(W) × 10(D)mm
70g approx.
LR44 × 2, Instruction Manual
AC V
Built-in
Button type battery LR44 (SR44)1.5V × 2
190(L) × 39(W) × 31(D)mm
Approx. 100g (including batteries)
Carrying case, LR44 (1.5V) × 2, Instruction manual
Stock no.
Simple, light-weight and compact in size.
Display : 4000 counts.
Auto-range, continuity & diode test features
Automatically turns power off in about 15 minutes to conserve
battery life.
Standards: IEC 61010-1 CAT.III 300V, IEC 61010-2-031, IEC
61326-1
Frequency Hz
Resistance Ω
S$
S$
S$
1+ 100·00
Kew Mate 2001
AC/DC Digital Multimter with open-jaw current
clamp
3400-count LCD with bargraph display
AC and DC current measuring capability with open-jaw
sensor
Pocket-sized with heavy-duty case design
Auto-ranging, with data-hold and range-hold functions
Sleep function to save battery consumption
Standards: IEC61010-1 CAT III 300V Pollution Degree
2, IEC61010-2-031, IEC61010-2-032, IEC61326-1
Diode Test
Capacitance Test
Continuity buzzer
Withstand Voltage
Power Source
Dimensions
Weight
Accessories
Stock no.
627-5705
Price per
OM
S$
1+
49·40
unit
S$
S$
S$
S$
Sanwa Digital Multimeters
CD800A
Integrated case suitable for use and storage
33⁄4 Digits 4000 Count
Auto Power-off (Enable or Disable)
Captive test leads prevent confusion of measurement polarity
Conforms to IEC61010 and CAT III 600V Max
Function
DC Voltage
AC Voltage (50–400Hz)
DC Current
AC Current (50–60 Hz)
Frequency, AC voltage
Frequency, AC current
Resistance
Continuity buzzer
Maximum circuit voltage
Conductor size, AC/DC current
Withstand voltage
Power Source
Size (LxWxD) and Weight
Stock no.
543-279
Measurement ranges
Accuracy
340mV, 3.4V, 34V, 340V, 600V
± (1.5% reading + 4 digits)
3.4V, 34V, 340V, 600V
± (1.5% reading + 5 digits)
60A (KM2000), 100A (KM2001)
± (2% reading + 5 digits)
60A (KM2000), 100A (KM2001)
± (2% reading + 5 digits)
3.4 kHz, 34 kHz, 300 kHz
± (0.1% reading + 1 digit)
3.4 kHz, 10 kHz
± (0.1% reading + 1 digit)
± (1% reading + 3 digits)
340Ω, 3.4kΩ, 34kΩ, 340kΩ
± (5% reading + 5 digits)
3.4MΩ
± (15% reading + 5 digits)
340MΩ
Sounds at <30Ω on 340Ω range
± 10Ω
600Vac/dc (between line/neutral)
300Vac/dc (against earth)
Maximum Ø 6mm (KM2000) 10mm (KM2001)
3700Vac for 1 minute
Two R03 or equivalent (AAA 1.5V) batteries
128 x 91 x 27 mm, approx. 220 g
Price per
OM
unit
S$
S$
S$
DC Voltage (V)
AC Voltage (V)
DC (A)
AC (A)
Stock no.
453-6317
Frequency
DC Current
AC Current
Capacitance Test
Continuity Check
Diode Test
Power Source
Dimensions
Weight
Stock no.
255-017
Price per
unit
S$
1+
97·50
1 box
S$
S$
Card type DMM
108 (H) x 56 (W) x 11.5 (D), approx. 50g
Auto Power Off Function
Relative, Data hold function
Duty measurement
IEC1010-1 500V CATII
Function
dc Voltage
ac Voltage
Range
400.0mV to 500V
4.000V to 500V
Stock no.
422-2541
Resistance
Capacitance
Frequency
400Ω to 40.00MΩ
4.000nF to 200.0μF
9.999Hz to 99.99kHz
OM
S$
1+
57·50
S$
Price per
unit
OM
S$
1+
75·50
PM10 Multimeter
A very compact DMM incorporating captive test leads
Combined 3200 digital count and bar-graph display
Rubber cover adds protection
Continuity buzzer (Open-circuit test volatge 1.3V)
Conforms to IEC 1010 CATIII 300V
400mV/4/40/400/600V (Input Impedance 10MΩ)
±0.6 ±4dgt (400mV/4/40/400V)
±1.0 ±4dgt (600V)
400mV/4/40/400/600V (Input Impedance 10MΩ)
±1.6 ±4dgt (20∼400mV)
±1.3 ±4dgt (4/40V)
±1.6 ±4dgt (400/600V)
400Ω/4/40/400kΩ/4/40MΩ
±1.0 ±4dgt (400Ω/4/40/400kΩ/4MΩ)
±2.0 ±4dgt (40MΩ)
5.12/51.2/512Hz/5.12/51.2/512kHz/5.12/10MHz
400/4000μA/40/400mA/4/10A
±2.0 ±4dgt (400/4000μA)
±1.0 ±4dgt (40/400mA)
±1.6 ±4dgt (4/10A)
400/4000μA/40/400mA/4/10A
±2.6 ±4dgt (400/4000μA)
±2.0 ±4dgt (40/400mA/4/10A)
40/400nF/4/40/100μF
400Ω (Buzzer sounds below 70Ω)
4V Release Voltage: Approx. 0.4mA Test Current
R6P(1.5V) × 2
155(L) × 75(W) × 33(D)mm
260g
Resistance
OM
1+ 196·00
Display: 4000 counts
Auto range and manual range selector provided
(with range hold feature)
Diode test and capacitance test features
Resistance range provides audible continuity test
Automatic power-off function after approximately 30 minutes to conserve battery
life
Direct current measurement up to 10A AC and DC
Standards: IEC61010-1 CAT.III 300V, IEC 61326
Supplied with: Holster, test leads, batteries.
AC Voltage
Price per
PM3
1009 Digital Multimeter
DC Voltage
400m/4/40/400/600V Resistance (ohms)
400/4k/40k/400k/4M/40M
4/40/400/600V
Diode Test
Open Voltage: Approx 1.5V
40m/400mA
Size (HxWxD) & weight 176x104x46mm, 340g
40m/400mA
DC voltage (V)
AC voltage (V)
Manu. Part No.
PM10
320m/3.2/32/320/500
3.2/32/320/500
Stock no.
353-3856
Resistance (Ω)
Basic DC accuracy (%)
Price per
unit
320/3.2k/32k/320k/3.2M/30M
±0.8
OM
S$
1+
97·50
S$
S$
www.rssingapore.com
S$
New products available online every week
95
2325
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Zoom Bar graph
Auto Power Off (can be disabled)
Auto Lead Resistance Calibration
MAX / MIN Recording
Set off Beeper
Relative measurements
Range Selection
Auto and Manual ranges
Over-range indication
"O.L" displayed
Automatic polarity
"-" is displayed for negative polarity inputs
Low Battery Indication
Yes
Sampling rate - Numeric
Appox. 5 times/sec
Sampling rate - Bargraph
Approx. 60 times/sec
Operating Temperature
0 to 50°C @ 50% RH max.; no condensation
Storage Temperature (Battery removed)
-20 to 60°C 80% RH max.; no condensation
Environmental Condition
Operating altitude<2000m Pollution degree II
Power Supply
6LF22 (9V PP3)
Power Consumption
Approx. 24.3mW typical
Auto Power Off Timing
17 min
Fuse Protection
0.63A/250V ∅5x20mm IR 1.5kA
12.5A/500V ∅6x32mm IR 20kA
Dimension and Weight (including Holster)
179(H)x87(W)x55(D)mm approx. 430g
Accessories
K-type thermocouple K-250PC x 1
Safety
IEC 1010-1 overvoltage category III (Max.600V)
IEC 1010-1 overvoltage category II (Max.1000V)
E.M.C
EN50081-1, EN50082-1
PM11
Convenient all-in-one design with protective cover
3¾ digit 4000-count LCD display with bargraph
Permanently attached compact test leads which can be stored within
the case
Auto-ranging and power off features
Input impedance 10MΩ or greater
To IEC CAT III 300V, CAT II 500V
Function
Ranges
Best accuracy
DC Voltage
400mV, 4V, 40V, 400V, 500V
± (0.8% rdg + 4
digits)
DC Voltage
4V, 40V, 400V, 500V
± (2.3% rdg + 8
digits)
Resistance
400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ,
± (2% rdg + 4 digits)
40MΩ
Continuity
Buzzer sounds at X20Ω, 1.3V open-circuit voltage
Diode test
Open-circuit test voltage approx. 3V
Power source 2 x LR44 (1.5V button cell)
Size and
177 x 76 x 18mm, 117 g
Weight
Stock no.
543-291
Price per
OM
unit
S$
S$
S$
422-5001
Price per
OM
S$
1+
335·00
unit
CD771
PC Series USB Connecting Cable
A leading digital multimeter benefiting from the latest design technology
giving the user excellent performance, easy-to-read LCD with backlight and
thermoplastic elastomer holster with high resistance to drop shock.
3¾ digit 4000 count multimeter
Entire outer surface of the case is formed with thermoplastic elastomer,
giving main meter high resistances against drops
1.5V battery check functionality available
Continuity buzzer with LED indication & diode test functions
Auto power off function (30 min)
Standards: IEC61010 CAT III 600V
Supplied with: 1 pair of test leads.
Note: PC Link software must be version 1.13 or later
DC Voltage 400mV to 1000V
AC Voltage 4V to 1000V
AC Current 4μA to 10A
Continuity Buzzer sounds in a range of 0 to
Check
130Ω. Open voltage at approx DC
0.4V
Diode Test Open voltage at approx DC 1.5V
DimensionsH166 x W82 x D44
Weight
360g
Resistance 400Ω to 40MΩ
Frequency 5 Hz to 100kHz
50nF to 100μF
DC Current 400μA to 10A
Stock no.
635-7807
Price per
unit
OM
S$
Manu. Part No.
S$
Stock no.
543-857
unit
OM
S$
± (1.4% reading + 3 digits)
± (1.8% reading + 6 digits)
± (0.5% reading + 2 digits)
± (1.2% reading + 7 digits)
± (1.2% reading + 5 digits)
± (5% reading + 10 digits)
± (0.3% reading + 3 digits)
± (0.3% reading + 30 digits)
S$
S$
1+ 230·00
665-5158
S$
1+ 132·00
MAX / MIN Capture (Peak hold)
Optical Isolated RS-323 interface
High Resolution 0.01mV / 0.01Ω
Capitance / Frequency
Price per
unit
OM
S$
1+
410·00
ISO-TECH IDM 203/205 Bench
Multimeters
Features and facilities
OM = Order Multiple
S$
2000 display count LCD backlit display with annunciators
9 functions / 39 ranges
AC / DC voltage and current measurement
Resistance, capacitance & frequency measurement
Continuity and diode test
Fully auto-ranging with manual override
MIN/MAX and display HOLD functions
Measures up to 600V with protection against 600V input
on resistance ranges
Current ranges fully fuse protected
Test lead storage compartment provided in the top of the case
ac/dc dual power sources
Side strap allows unit to be carried with one hand when used away from the bench. It may also be
carried by the neck strap
Mains operation or battery powered
Power Requirements: AC; 90 ∼ 264V, 50/60Hz < 10VA, DC; Qty 6 x 1.5V AA LR6 battery (not
supplied).
Complies with : IEC 61010-1 CAT III 300V, CAT II 600V
Dimensions & weight : 218mm (W) x 195mm (L) x 73mm (H) : 1.3 kg.
Supplied with: Test-leads crocodile clips, UK & European power cords, carrying-strap. & instruction
manual
Function
Measuring Ranges
Basic accuracy
Range resolution
DC Voltage
200 mV → 600 V
±0.5%
100 μV → 1 V
AC Voltage
200 mV → 600 V
±1.5%
100 μV → 1 V
±1.0%
0.1μA → 10 mA
DC Current
200 μA → 10 A
±1.5%
0.1μA → 10 mA
AC Current
200 μA → 10 A
±0.7%
100 mΩ → 10 kΩ
Resistance
200 Ω → 20 MΩ
Capacitance
2 nF → 2 mF
±1.9%
1 pF → 1 μF
Frequency
2000 Hz → 20 MHz
±0.01%
1Hz → 10 kHz
Stock no.
The Sanwa PC510 multimeter features an RS-232C/USB port
to allow measurement data to be transferred to your PC as a
graph, data can also be stored in a file format and analysed
in more detail with an application such as MS-Excel.
2326
unit
S$
IDM 201N Bench Multimeter
PC510
Display: 5000 count LCD
Basic DC Accuracy 0.08%
AC True RMS
Temperature K-type
OM
S$
ISO-TECH
400μA, 4000μA, 40mA, 400mA, 4A, 15A
400μA, 4000μA, 40mA, 400mA, 4A, 15A
400mV, 4V, 40V, 400V, 1000V
4V, 40V, 400V, 1000V
400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
50nF, 500nF, 5μF, 50μF, 100μF
5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 100kHz
-20 to 300°C (0·1°C resolution)
Buzzer sounds & LED illuminates below 85Ω
Open circuit voltage approx 1.5V
40 - 400Hz (sine wave)
166 x 82 x 44 mm, 360 g
Price per
488-4751
Price per
S$
S$
1+ 155·00
A leading digital multimeter benefiting from the latest design technology,
giving the user excellent performance, with easy to read backlit LCD and high
"drop-shock" resistance.
3¾ digit 4000-count Backlit LCD display
True RMS AC voltage and current measurement
Data hold, Range hold, Relative function
Continuity buzzer with LED indication, Diode test
Temperature measurement via type K thermocouple
Auto power off-function (30min.)
Safety cap for current sockets to prevent operational mistakes
Fitted with High Breaking Capacity (30kA) fuse
Supplied with: Test leads & K-250CD thermocouple
DC A
AC A
DC V
AC V
Resistance
Capacitance
Frequency (Hz)
Temperature
Continuity
Diode Test
Bandwidth
Size (LxWxD) and Weight
Stock no.
KB-USB2
CD772 True RMS
95
Stock no.
1+ 104·50
Tilt stand / Holster
Auto Range / Range Hold
Diode test / Data Hold
Fast response Continuity Buzzer
Two battery/mains 4000 count bench multimeters with
analogue bargraph. Capable of measuring voltage, current,
resistance, frequency and capacitance.
IDM 203/205 features:
Analogue bargraph updates 20 times per second
Frequency measurement to 1MHz
Capacitance ranges from 4nF f.s.d. to 40μF f.s.d.
Input protection to 600V r.m.s. min. on all ranges
HRC fuse protected current ranges
Delayed hold feature allows automatic capture of
measurements
Relative function stores the displayed reading as a reference value
Max/Min mode records the highest and lowest readings
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
Fluke
Autoranging with manual override
Independently approved to meet IEC 1010-1 (safety standard) 600V Cat. II.
Lead storage facility in case
ac/dc dual power sources
IDM 205 additional features:
True rms measurement on a.c. ranges to avoid inaccuracies on non-sinusoidal waveforms
Memory feature allows displayed reading to be stored for later recall
Note: Colour may differ from that shown.
Supplied with: test leads, carrying strap, power lead and users manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Description
±0.75% / ±0.3 %
+2D
400mV
600V
0.1mV
±1.5% / 1%
+5 D
4V
600 V
0.1mV
1kHz
Stock no.
S212-871
S212-887
IDM203
IDM205
Price per
unit
unit
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
OM
S$
1+
1+
475·00
590·00
8845A & 8846A 6.5 Digit Precision
Multimeter
±1.5% / 0.8%
+ 4D
4mA
10A
1μA
±2.5% - 0.8%
+5D
4mA/200mA
10A
0.1μA / 1μA
1kHz
±2.5% / 1.5%
+5D
S$
S$
TTI
TTI 1604 Multimeter, 40000 Count
40000 count auto/manual ranging
Large bright LED display (14mm/0.56in.)
Resolution 10mΩ, 0.1μA
Current measurement up to 10 amps
True RMS a.c. functions, wide bandwidth
Frequency measurement function
Relative, T-Hold and Min-Max functions
Isolated serial interface as standard
Safety Rating: EN61010-1 CAT II 600 V
Supplied with: mains lead, test leads and comprehensive instruction manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Description
0.08%
+4D
400mV
1000V
10μV
±1%
+4D
400mV
750V
100μV
20kHz
Stock no.
S284-8056
TT1604
Price per
unit
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
OM
S$
1+
660·00
±3%
+10D
4mA
10 A
0.1μA
±3%
+4D
1mA
10A
1μA
10kHz
±1%
+10D
S$
S$
TTI 1906, 200000 Count Multimeter
High brightness 5 1/2 digit LED display
Auto-ranging or manual ranging
1uV, 1mΩ and 1nA sensitivity
True rms a.c. ranges
Current measurement up to 10 amps
Null and Hold functions
100 reading data logger
Wide range of computing functions: Ax+B, Hi-Lo-Pass, % deviation, min/max, dB
Isolated RS-232 interface as standard
1906-GP comes with built-in GPIB interface (conforms to IEEE 488.2) see RS 233-3245
Safety Rating: EN61010-1 CAT II 600 V
Supplied with: mains lead, test leads and comprehensive instruction manual.
DC Voltage Accuracy
DC Voltage Digits
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Digits
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
Stock no.
214-293
Price per
unit
0.012%
+3D
200mV
1000V
1μV
±0.2%
+150D
200mV
750V
1μV
50kHz
DC Current Accuracy
DC Current Digits
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Digits
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Digits
OM
S$
1+
1050·00
Resolution
Measurement Rate (Rdgs/s)
Measurement Function
Basic VDC Accuracy
Vdc
Vac
Resistance (2x4 wire Ohms)
DC Current
AC Current
Freq/Period
Continuity/Diode Test
Capacitance
Temperature RTD
Advanced Functions
Analytical Functions
Math Functions
Input/Output
USB Device Port
Real Time Clock
Interfaces
Programming Languages/Emulation
Modes
General
Weight
Size
Warranty
Description
Stock no.
Fluke 8845A
Fluke 8846A
S615-9984
S615-9978
8845A
6.5 Digits
1000
8846A
6.5 Digits
2000
0.0035%
1000V
750V
100 MΩ
100μA to 10A
1A
3Hz to 300Hz
Yes
No
No
0.0024%
1000V
1000V
1GΩ
100μA → 10A
10mA → 10A
3Hz → 1MHz
Yes
1nF → 0.05F
-200°C → +600°C
Statistics, Histogram, TrendPlotTM
Ratio, Null, Min/Max
Statistics, Histogram, TrendPlotTM
Ratio, Null, Min/Max dB/dBm
No
USB Memory Drive Port
No
Yes
RS232, IEEE-488.2, Ethernet
RS232, IEEE-488.2, Ethernet
SCPI (IEEE-488.2), Agilent 34401A, Fluke SCPI (IEEE-488.2), Agilent 34401A, Fluke
45
45
3.6Kg (8lbs)
W 215mm, H 88mm ,D 293mm
1 Year
Price per
unit
unit
3.6Kg (8lbs)
W 215mm, H 88mm ,D 293mm
1 Year
OM
S$
1+
1+
1840·00
2580·00
S$
S$
Fluke 8808A Multimeter , 5.5 digit
±0.12%
+12D
200μA
10A
1nA
±0.4%
+100D
200μA
10A
1nA
1kHz
±0.019%
+3D
S$
The Fluke 8845A and 8846A are 6.5 digit precision
multimeters that are able to handle measurements on the
bench or in a system. Both feature a unique graphical display
that can reveal signal quality issues like drift, intermittant and
stability by using the analytical functions. The 8846A
increases basic Vdc accuracy to 0.0025% plus adds
measurements like capacitance, RTD temperature and dB.
The 8846A also includes a USB device port to connect
standard USB memory storage devices. Both instruments
include an RS-232, IEEE-488 and Ethernet interface as
standard, with popular DMM emulation modes which make system integration a simple task.
6.5 Digit Resolution
Graphical Display
Basic V dc accuracy of up to 0.0025%
100uA to 10A Current
10 Ohm to 1 Gohm Resistance
2x4 Wire Ohms measurement technique
Frequency, Period, Capacitance & RTD Temperature measurements
Analytical Modes; Trendplotᓽ, Histogram and Statistics
USB Device Port, for memory storage devices
RS-232,IEEE-488 and Lan interfaces
Popular DMM emulation modes
Supplied with: TL71 test lead set, FlukeViewᓼ Forms – Basic for 8845A/8846A, mains lead, spare
mains fuse, programmer & users manuals (CD-ROM).
Contact RS for calibration requirements
S$
The Fluke 8808A delivers a wide variety of measurement
functions, including volts, ohms, and amps, plus frequency with a basic V dc accuracy of 0.015 %
Six dedicated instrument setup keys to instantly select
saved test configurations. Ideal for making routine
measurements.
Large and clear Pass and Fail indication based on user
defined limits
Extreme ease of use through soft key menu access, ideal
for unskilled operators
5.5 digit resolution with 0.015% basic dc V accuracy,
Dual display to measure different signal characteristics such as Volts and Current simultaneously
Dedicated current ranges to measure dc leakage current (i-Leakage mode)
Math Functions: dBm, dB, Min, Max
Patented split terminal jacks for 2x4 Ohms function for precise 4-wire low ohms measurements.
RS-232 Interface
Programming Languages/Modes: Simplified ASCI, Fluke 45
Safety Rating EN61010-1 CAT I 1000 V, CAT II 600 V
Note: Accuracy= ± (% of reading+% of range)
Supplied with: Mains lead,TL71 Test Lead Set & users manual on CD-ROM.
Contact RS for calibration requirements
Accuracy dc Voltage
Highest Voltage Range
Stock no.
S414-193
0.015+0.003 %
200 mV to 1000 V dc
Price per
unit
Highest Current Range
OM
S$
1+
1300·00
dc 200 μA to 10 A
S$
S$
95
Many more leading brands from over 2,500 suppliers available online
2327
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Fluke 8845A/8846A Accessories
FlukeViewᓼ FVF-SC4,Extended version of FlukeViewᓼ Basic
software with a large array of tabular and graphical forms to
transfer data points from the 8845A/8846A meter to a PC.
Includes FlukeViewᓼ Forms Designer to product customized
forms. Supplied with a USB cable for the 8846A
meter.,TL2X4W-PT,4 wire measurement test lead set to make
4 wire measurements with two wires at the Fluke 884xA
DMM patented split terminal jacks.,TL2X4W-PTII,4 wire
measurement test lead set to make 4 wire measurements
with two wires at the Fluke 884xA multimeters patented split
terminal jacks. Safetty rating: IECG61010-31 CATI 1000V. Max
curent 500mA.,Fluke 884X-SHORT,4 wire short accessory for
use with Fluke 8845A and 8846A Digital Multimeters.,Fluke Y8846S,Rack mount kit to mount a single
Fluke 8845A/8846A Digital Multimeter into a standard 19 inch rack.,Fluke Y8846D,Rack Mount Kit to
mount 2 Fluke 8845A/8846A precision multimeters in a standard 19 inch rack.
Description
Stock no.
FlukeView FVF-SC4 Software
TL2X4W-PTII Test Lead Set
648-1562
523-310
Price per
unit
unit
OM
S$
1+
1+
507·00
156·00
S$
S$
S$
S$
Fluke TL2X4W-TWZ 4-Wire Probe
Tweezers
Probe tweezers to measure low value surface mount resistors
4-wire measurement method to eliminate the resistance of the
test leads
Maximum voltage between test lead and ground: 33Vrms,
46.7Vpeak or 70Vdc
Maximum Current: 1A.
Compatible with the Fluke 8808A, 8845A and 8846A precision
digital multimeters
Stock no.
665-4713
Price per
unit
OM
S$
1+ 225·00
Agilent
Agilent 34401A Multimeter,
6.5 digit
95
The 34401A provides a combination of resolution, accuracy
and speed for fast, accurate bench and system testing.
Measure up to 1000 volts with 6½digits resolution
0.0035% basic dcV accuracy
0.06% basic acV accuracy
10mA to 3A current ranges
3 Hz to 300 kHz ac bandwidth
Storage memory for up to 512 readings
Continuity and diode test
Selectable 2 or 4 wire resistance measurement
Test lead null feature to remove lead resistance and other fixed offsets.
1000 readings/s direct to GPIB
Math functions include dB and dBm , Min,Max/Avg Limit & Hold measurements
External Trigger signals inputs to synchronize to other instruments in a test system.
TTL output indicates Pass/Fail results when limit testing is used.
SCPI, Agilent 3478A and Fluke 8840A /42) command languages for compatibility with existing test
software.
Supplied with DMM Intuilink data logging software
Safety Rating CAT II 300 V
Dimensions 104 mm x 254 mm x 348 mm : weight 3.6 kg
30A current shunt available separately see stock no. 501-310
Optional rack mount kit is available see stock nos 501-291 & 501-281
Note: Support Accessories: Portable thermal dot matrix printers for results printout, see stock no. 6973787
Supplied with: Test lead set with crocodile clips and grabber attachments, English manual and
multilingual manuals on CD-ROM, mains lead , Intuilink connectivity software.
Function
Ranges
Lowest
Basic Accuracy* (%) (1 year)
Resolution
Voltage DC
100mV, 1V, 10V, 100V, 1000V
100nV
0.035+0.0005
Voltage AC True RMS 100mV, 1 – 750V
100nV
0.06+0.04(10Hz to 20kHz)
(Range 3Hz to 300 kHz)
Resistance
100Ω, 1kΩ, 10kΩ, 100kΩ, 1MΩ,
100μΩ
0.010+0.001
10MΩ, 100MΩ
Current DC
10mA, 100mA, 1A, 3A
10 nA
0.05+0.005
0.10+0.04(10Hz to 5kHz)
Current AC True RMS 1A
1μA
0.15+0.06(10Hz to 5kHz)
(Range 3Hz to 10 kHz) 3A
Frequency counter
10hz to 40Hz
0.03
(Range 3 to 300kHz)
40 Hz to 300 kHz
0.01
100mV to 750V
*Accuracy= ± (% of reading +% of range)
DC Voltage Accuracy
±0.035%
DC Voltage Lowest Range
100mV
DC Voltage Highest Range
1000V
DC Voltage Lowest Resolution
100nV
AC Voltage Accuracy
±0.06%
AC Voltage Lowest Range
100mV
AC Voltage Highest Range
750V
AC Voltage Lowest Resolution
100nV
AC Voltage Max Frequency
300kHz
DC Current Accuracy
±0.05%
DC Current Lowest Range
10mA
DC Current Highest Range
3A
DC Current Lowest Resolution
10nA
AC Current Accuracy
±0.1%
2328
OM = Order Multiple
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Lowest Range
Resistance Highest Range
Description
34401A Multimeter BS1363
34401A Multimeter Aus/NZ
1A
3A
1μA
300kHz
±0.01%
100Ω
100MΩ
Stock no.
S501-354
678-0730
Price per
unit
unit
OM
S$
1+
1+
1615·00
2550·00
S$
S$
Agilent 34410A Multimeter,
6.5 digit
The Agilent 34410A is a high performance digital multimeter
designed for accuracy, high speed and precise triggering,
offering maximum versatility. The 34410A is a 6½ digit,
dual-display multimeter featuring 10,000 readings per
second at 5½ digits, datalogging wizard, resistance and
frequency, and added LAN, USB and GPIB connectivity.
Measure up to 1000 volts with 6½digits resolution
0.0030% 1-year basic dcV accuracy
0.06% basic acV accuracy
10,000 readings/sec @ 5½ digits to the PC
1,000 readings/s @ 6½ digits direct to PC
LAN, USB & GPIB standard
DCV, ACV, DCI, ACI,
2-wire and 4-wire resistance measurement with offset allowing accurate results in the presence of
voltages
Frequency, Period, Continuity, and Diode Test
Capacitance & Temperature measurements
Data logger with 50 k reading non-volatile memory
LXI Class C Compliance provides LAN transfer rates of over 250,000 readings/s
Math functions include dB and dBm , Min/Max/Avg Limit & Hold measurements
Fast external trigger to synchronize to other instruments in a test system.
Real-time math and statistics are included, and fast, 20 μs peak-detect
Supplied with DMM Intuilink data logging software
Safety Rating EN61010-1 CAT I 1000 V, CAT II 300 V
Dimensions 104 mm x 261 mm x 303 mm : weight 3.6 kg
30A current shunt available separately see stock no. 501-310
Optional rack mount kit is available see stock nos 501-291 & 501-281
Supplied with: Test lead set with probes and SMT attachments, USB interface cable English manual
and multilingual manuals on CD-ROM, mains lead , Intuilink connectivity software. IVI-COM and
LabVIEW software drivers
Function
Ranges
Lowest
Basic Accuracy* (%) (1 year)
Resolution
Voltage DC
100mV, 1V, 10V, 100V, 1000V
100nV
0.030+0.0005
Voltage AC True RMS 100mV to750V
100nV
0.06+0.03(10Hz to 20kHz)
(Range 3Hz to 300 kHz)
Resistance
100Ω, 1kΩ, 10kΩ, 100kΩ, 1MΩ,
100μΩ
0.010+0.001
10MΩ, 100MΩ, 1GΩ
0.05+0.006
Current DC
100μA, 1mA, 10mA, 100mA, 1A, 3A 100pA
100pA
0.10+0.04(3Hz to 5kHz)
Current AC True RMS 100μA to 3A
0.20+0.04(5kHz to 10kHz)
(Range 3Hz to 10 kHz)
Frequency counter
10Hz to 40Hz
0.02
(Range 3 to 300kHz)
40Hz to 300kHz
0.007
100mV to 750V
0.1pF
0.4 + 0.1
Capacitance
1nF, 10nF, 100nF, 1μF, 10μF
*Accuracy= ± (% of reading +% of range)
DC Voltage Accuracy
±0.030%
DC Voltage Lowest Range
100mV
DC Voltage Highest Range
1000V
DC Voltage Lowest Resolution
100nV
AC Voltage Accuracy
±0.06%
AC Voltage Lowest Range
100mV
AC Voltage Highest Range
750V
AC Voltage Lowest Resolution
100nV
AC Voltage Max Frequency
300kHz
DC Current Accuracy
±0.05%
DC Current Lowest Range
100μA
DC Current Highest Range
3A
DC Current Lowest Resolution
100pA
AC Current Accuracy
±0.1%
AC Current Lowest Range
100μA
AC Current Highest Range
3A
AC Current Lowest Resolution
100pA
AC Current Max Frequency
300kHz
Resistance Accuracy
±0.01%
Resistance Lowest Range
100Ω
Resistance Highest Range
1GΩ
Description
34410A Multimeter BS1363
34410A Multimeter Aus/NZ
Stock no.
501-308
678-0737
Price per
unit
unit
OM
S$
1+
1+
1939·00
3060·00
Agilent 34411A Multimeter,
6.5 digit
The Agilent 34411A is an enhanced version of the 34410A
high performance digital multimeter with increased storage
memory and triggering features and additional super fast
readings mode.,The 34411A is a 6½ digit, dual-display
multimeter featuring 50,000 readings per second at 4½ digit
resolution, data logging wizard, resistance and frequency,
and added LAN, USB and GPIB connectivity.
Measure up to 1000 volts with 6½ digits resolution
0.0030% 1-year basic dcV accuracy
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
0.06% basic acV accuracy
50,000 readings/sec @ 4½ digits to the PC
10,000 readings/sec @ 5½ digits to the PC
1,000 readings/s @ 6½ digits direct to PC
LAN, USB & GPIB standard
DCV, ACV, DCI, ACI measurements
Analogue level triggering and programmable pre-and post-trigger
1 million readings of volatile memory in addition to 50,000 reading of non-volatile memory,
enabling the capture of low-frequency waveforms, characterization of device performance and
transfer of results for analysis to a computer.
2-wire and 4-wire resistance measurement with offset allowing accurate results in the presence of
voltages.
Frequency, Period, Continuity, and Diode Test
Capacitance & Temperature measurements
LXI Class C Compliance provides LAN transfer rates of over 250,000 readings/s
Math functions include dB and dBm , Min/Max/Avg Limit & Hold measurements
Real-time math and statistics are included, and fast 20 μs peak-detect
Supplied with DMM Intuilink data logging software
Safety Rating EN61010-1 CAT I 1000 V, CAT II 300 V
Dimensions 104 mm x 261 mm x 303 mm : weight 3.6 kg
30A current shunt available separately see stock no. 501-310
Optional rack mount kit is available see stock nos 501-291 & 501-281
Supplied with: Test lead set with probes and SMT attachments, USB interface cable English manual
and multilingual manuals on CD-ROM, mains lead , Intuilink connectivity software. IVI-COM and
LabVIEW software drivers
Function
Ranges
Lowest
Basic Accuracy* (%) (1 year)
Resolution
Voltage DC
100mV, 1V, 10V, 100V, 1000V
100nV
0.030+0.0005
Voltage AC True RMS 100mV to750V
100nV
0.06+0.03(10Hz to 20kHz)
(Range 3Hz to 300 kHz)
Resistance
100Ω, 1kΩ, 10kΩ, 100kΩ, 1MΩ,
100μΩ
0.010+0.001
10MΩ, 100MΩ, 1GΩ
0.05+0.006
Current DC
100μA, 1mA, 10mA, 100mA, 1A, 3A 100pA
Current AC True RMS 100μA to 3A
100pA
0.10+0.04(3Hz to 5kHz)
(Range 3Hz to 10 kHz)
0.20+0.04(5kHz to 10kHz)
Frequency counter
10Hz to 40Hz
0.02
(Range 3 to 300kHz)
40Hz to 300kHz
0.007
100mV to 750V
Capacitance
1nF, 10nF, 100nF, 1μF, 10μF
0.1pF
0.4 + 0.1
*Accuracy= ± (% of reading +% of range)
DC Voltage Accuracy
±0.030%
DC Voltage Lowest Range
100mV
DC Voltage Highest Range
1000V
DC Voltage Lowest Resolution
100nV
AC Voltage Accuracy
±0.06%
AC Voltage Lowest Range
100mV
AC Voltage Highest Range
750V
AC Voltage Lowest Resolution
100nV
AC Voltage Max Frequency
300kHz
DC Current Accuracy
±0.05%
DC Current Lowest Range
100μA
DC Current Highest Range
3A
DC Current Lowest Resolution
100pA
AC Current Accuracy
±0.1%
AC Current Lowest Range
100μA
AC Current Highest Range
3A
AC Current Lowest Resolution
100pA
AC Current Max Frequency
300kHz
Resistance Accuracy
±0.01%
Resistance Lowest Range
100Ω
Resistance Highest Range
1GΩ
Description
34411A Multimeter BS1363
34411A Multimeter Aus/NZ
Stock no.
501-332
678-0746
Price per
unit
unit
OM
S$
1+
1+
3039·00
4650·00
S$
S$
Agilent 34405A Multimeter,
5.5 digit
5½ digit benchtop digital multimeter with a broad range of
measurement functions, including capacitance
measurements. The 34405A features simultaneous reading of
DC and AC measurements with its dual display and can take
up to 19 readings/sec at 4½ digit resolution through the
standard USB interface. The SCPI language compatibility
makes it easy to migrate from an existing test setup.
120000 counts resolution
0.025% DC voltage accuracy
Bright Vacuum Fluorescent dual display
16 measurement functions
10mA to 10A current ranges
Resistance, continuity and diode test
6 built in math functions: dBm, dB, Min/Max, Limit & Hold
USB 2.0 interface (TMC-488.2 Compliance)
SCPI language compatible
Supplied with DMM Intuilink data logging software
Safety Rating EN61010-1 CAT I 1000 V, CAT II 300 V
Dimensions 104 mm x 260 mm x 272 mm : weight 3.75 kg
30A current shunt available separately see stock no. 501-310
Supplied with: Test lead set, USB interface cable,English manual and multilingual manuals on CDROM, mains lead , Intuilink connectivity software. IVI-COM and LabVIEW software drivers
Function
Ranges
Lowest
Basic Accuracy* (%)
Resolution
Voltage DC
100mV, 1V, 10V, 100V, 750V
1μV
0.025+0.005
0.2+0.1(45Hz to 10kHz)
Voltage AC True RMS
100mV, 1V, 10V, 100V, 1000V
1μV
(Range 20 Hz to 100 kHz)
Resistance
100Ω, 1kΩ, 10kΩ, 100kΩ, 1MΩ,
1 mΩ
0.005+0.005
10MΩ, 100MΩ
Current DC
10mA, 100mA, 1A, 10A
100 nA
0.05+0.005
Current AC True RMS
(Range 20 Hz to 10 kHz)
Frequency counter
(Range 0 to 300kHz)
100mV to 750V
Capacitance
10mA, 100mA, 10A
100 nA
<20Hz
20 Hz to 300 kHz
0.04+0.003
0.02+0.003
1nF, 10nF, 100nF, 1μF, 10μF, 100μF, 1pF
1mF, 10mF
*Accuracy= ± (% of reading +% of range)
DC Voltage Accuracy
DC Voltage Lowest Range
DC Voltage Highest Range
DC Voltage Lowest Resolution
AC Voltage Accuracy
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Lowest Resolution
AC Voltage Max Frequency
DC Current Accuracy
DC Current Lowest Range
DC Current Highest Range
DC Current Lowest Resolution
AC Current Accuracy
AC Current Lowest Range
AC Current Highest Range
AC Current Lowest Resolution
AC Current Max Frequency
Resistance Accuracy
Resistance Lowest Range
Resistance Highest Range
Capacitance Accuracy
Capacitance Lowest Range
Capacitance Highest Range
Description
Stock no.
34405A Multimeter BS1363
34405A Multimeter Aus/NZ
501-358
678-0733
Price per
0.05+0.1(45Hz to 1kHz)
OM
S$
1+
1+
1167·00
1800·00
unit
unit
1.0 + 0.05
±0.025%
100mV
1000V
1μV
±0.025%
100mV
750V
1μV
100kHz
±0.05%
10mA
10 A
100nA
±0.05%
10mA
10A
100nA
10kHz
±0.05%
100Ω
100MΩ
±0.1%
1nF
10mF
S$
S$
Agilent U3402A Multimeter,
5.5 Digits
5½ digit, 120,000 counts resolution, 0.012% Vdc
basic accuracy
Slow medium & fast measurement speeds for
different testing needs; faster measurement
speed at lower resolution or higher resolution at
a slower measurement speed
Dual display bright vacuum fluorescent display
enables simultaneous display of 2 measurement
parameters
11 basic measurements include DC, AC and AC+DC voltage and current, 2 & 4-wire resistance,
frequency, continuity and diode tests
Math functions : dBm, Relative, Min/Max, Compare and Hold
True RMS AC, AC+DC
Dimensions & weight: 105 x 255 x 305mm: 3.4kg
Safety rating: EN61010-1 CAT II 300V
Note: U3400A-1CM Rackmount Kit see stock no. 692-7131
34330A Current Shunt, 30 Amp see stock no. 501-310
11059A Kelvin probe set see stock no. 692-7147
Supplied with: Multimeter test lead set, user manual on CD-ROM, mains lead
Function
Measuring Ranges*
Basic accuracy
Max Range resolution*
DC Voltage
120 mV → 1000 V
±0.012%
1 μV → 10 mV
±0.2%**
1 μV → 10 mV
AC Voltage (20 Hz → 100kHz) 120mV → 750 V
±0.2%
0.1 μA → 100 μA
DC Current
12 mA → 12 A
12 mA → 12 A
±0.5%
0.1 μA → 100 μA
AC Current (20 Hz → 10kHz)
(true RMS ac, ac+dc)
±0.06 %
1 mΩ → 1 kΩ
Resistance
120 Ω → 120 MΩ
Frequency measurement
1200 Hz → 1 MHz *** ±0.005%
10 mHz → 10 Hz
* Specification at slow measurement speed
** 45 Hz to 2 kHz
*** Minimum frequency 5Hz
Stock no.
692-7134
Price per
OM
S$
1+
947·00
unit
S$
S$
Agilent U3606A Multimeter,
5.5 Digits with 30W DC
Power Supply
5½ digit, 120,000 counts resolution 0.025%
Vdc basic accuracy
Measurements: DC and AC voltage and
current, 2-wire and 4-wire milliohm
resistance, frequency, capacitance, continuity
and diode test
Math functions include Null, dBM, dB, Hold
and Min/Max/Avg
0.025% DC Voltage accuracy
Single-output power supply, selectable 30V/1A or 8V/3A ranges with auto ramp and scan capability
0.01% + 3mV load regulation
4.8kHz Square-wave generator
GPIB (IEEE-488) and USB 2.0 full speed interface and SCPI programmability
Dimensions & weight: 105 x 255 x 329mm: 3.9kg
Safety rating: EN61010-1 CAT I 1000V, CAT II 300V
Note: U3606A-1CM Rackmount Kit see stock no. 692-7128
34330A Current Shunt, 30 Amp see stock no. 501-310
11059A Kelvin probe set see stock no. 692-7147
Visit our website for additional price information and exciting promotions
95
2329
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Supplied with: Multimeter test lead set, USB2.0 cable, user manual on CD-ROM, mains lead
Function
Measuring Ranges
Basic accuracy
Range resolution
±0.025%
1 μV → 10 mV
DC Voltage
100 mV → 1000 V
50 mV → 750 V
±0.2%
1 μV → 10 mV
AC Voltage (20 Hz → 100kHz)
DC Current
10 mA → 3 A
±0.15%
0.1μA → 0.1 mA
10 mA → 3 A
±0.5%
0.01μA → 1 mA
AC Current (20 Hz → 10kHz)
Resistance
100 mΩ → 100 MΩ
±0.05%
1 mΩ → 1 kΩ
Capacitance
1 nF → 10 mF
±1.0%
1 pF → 1μF
±0.02%
Frequency measurement
1 Hz → 300kHz (Voltage)
1 Hz → 10kHz (Current)
Stock no.
S692-7125
Price per
OM
S$
1+
1791·00
unit
S$
S$
Supplied with: Multimeter test lead set, user manual on CD-ROM, mains lead
Function
Measuring Ranges
Basic accuracy
DC Voltage
500 mV → 1000 V
±0.02%
500mV → 750 V
±0.35%(true RMS ac)*
AC Voltage (30 Hz → 100kHz)
±0.5%(true RMS ac+dc)*
±0.05%
DC Current
500 μA → 10 A
500 μA → 10 A
±0.5% (true RMS ac)
AC Current (50 Hz → 20kHz)
±1.5% (true RMS ac+dc)
±0.1%
Resistance
500 Ω → 50 MΩ
Frequency measurement
500 Hz → 500kHz ** ±0.01%
* @50 Hz to 10 kHz
** Minimum frequency 5 Hz
Price per
OM
S$
1+
712·00
Range resolution
10 μV → 100 mV
10 μV → 100 mV
10 nA → 1 mA
10 nA → 1 mA
10 mΩ → 1 kΩ
0.01 Hz → 10 Hz
S$
Stock no.
501-310
Price per
OM
unit
1mV/A
S$
1+ 114·00
Agilent Rack Mount Kit
Rack mount kit designed to mount an Agilent instrument,
on either the left or the right side of a rack
Supplied with: One rack flange, one half-rack width filler
panel, 4 screws to attach the instrument, 4 rack screws with
nuts and installation instructions in English.
Rack Kit
Reference
34190A
U3400A-1CM
U3606A-1CM
Manu. Part No.
34190A
Agilent model compatibility
33120A,33220A, 33250A 34401A,34410A,34411A,
34420A, 34970A, 53131A, 53132A, 53181A
U3401A, U3402A
U3606A
Stock no.
501-291
Price per
unit
www.rssingapore.com
95
2330
OM = Order Multiple
S$
S$
S$
1+ 156·00
OM
S$
1+
86·00
Price per
unit
OM
S$
1+
1260·00
S$
S$
Tektronix DMM4040 and DMM4050
6.5 digit Precision Multimeters
4mm banana plugs
S$
697-4196
S$
Precision 0.001 ohm resistor housed in an epoxy resin
filled plastic case.
Compatible with the Agilent 34401A,34405A, 34410A, 34411A,
L4411A and 3458A DMMs
15A continuous, 30A for Termination
15 mins max.
Maximum voltage30 Vac; 60 Vdc
Output
Accuracy
±0.3% DC to 1 kHz, ±5%
to 5kHz
OM
5.5 digit display resolution
0.015% basic VDC accuracy (1 year)
Math Functions: dBm, dB, MIN, MAX, REL
2×4 Ohms 4-wire measurement technique
Dedicated DC leakage current measurements
Six dedicated instrument setup buttons
Limit Compare mode for PASS/FAIL testing
RS-232 interface
Safety Rating EN61010-1 CAT I 1000 V, CAT II 600 V
Dimensions 88 x 217 x 297 mm : weight 2.1 kg
Note: Accessories for the Tektronix DMM4000: TL705 697-4219 , TL710 697-4216 , TL725 697-4203 ,
TP750 697-4207 , Y8846S 697-4213 , Y8846D 697-4222
Supplied with: UK & Euro mains lead, TL710 Test Lead Set, spare line power fuse, user manual on
CD-ROM, RS-232 to USB adaptor cable, National Instruments LabVIEW SignalExpressᓽ Tektronix
Edition, Limited Edition Software
Function
Range
Resolution Typical Accurary (1Year)* (%)
1μV
0.015+0.004
Voltage DC
200 mV → 1000 V
Voltage AC (Freq 45 Hz to 20 kHz) 200 mV → 750 V
1μV
0.2+0.05
Resistance (2x4 Wire)
200Ω → 100 MΩ
1 mΩ
0.02+0.003
1 nA
0.03+0.008
Current DC
200 μA → 10 A
Current AC (Freq. 45 Hz to 2 kHz) 20 mA → 10A
100 nA
0.3+0.06
Freq. Period
20 Hz → 1 MHz (Freq. only) 0.1 mHz
0.01
*Accuracy= +/- (% of reading+% of range)
Stock no.
Agilent 34330A current
shunt, 30A
Current Rating
Price per
unit
Tektronix DMM4020 Multimeter,
5.5 digit
Note: U3400A-1CM Rackmount Kit see stock no. 692-7131
34330A Current Shunt, 30 Amp see stock no. 501-310
unit
Stock no.
Tektronix
4½ digit, 50,000 counts resolution, 0.02% Vdc
basic accuracy
Dual display bright vacuum fluorescent
display enables simultaneous display of 2
measurement parameters
11 basic measurements include DC, AC and
AC+DC voltage and current, 2-wire
resistance, frequency, continuity and diode
tests
Math functions : dBm, Relative, Min/Max, Compare, Hold & Percentage
True RMS AC, AC+DC
Dimensions & weight: 105 x 255 x 305mm: 3.4kg
Safety rating: EN61010-1 CAT II 300V
Stock no.
Dual lock link kit for sub-module vertical combinations,
as well as side-by-side combinations.
Compatible with the Agilent 34410A, 34411A, 34401A and 34420A DMMs,
the Agilent 34970A Data Acquisition Switch Unit, the Agilent 53131A,
53132A and 53181A counters, the Agilent 33220A and 33250A.
501-281
Agilent U3401A Multimeter,
4.5 Digits
S692-7122
Agilent 34194A Dual Lock
Link Kit
S$
S$
6.5 digit display resolution
Vac, Vdc, I ac, I dc, Ω, Continuity, Diode, Frequency,
Period
Maths functions: Zero, dBm, dB, MX+B, Offset, DCV ratio,
MIN, MAX, AVG
2×4 Ohms 4-wire measurement technique
Dedicated front-panel buttons to access frequently used
functions and parameters
TrendPlotᓽ paperless data recorder mode
Measurement statistics & Histogram Mode
USB host port on the front panel for storage of measurement data & instrument settings
RS-232, LAN & GPIB interfaces on rear panel
Safety Rating EN61010-1 CAT I 1000 V, CAT II 600 V
Dimensions 88 x 217 x 297 mm : weight 3.6 kg
Note: Accessories for the Tektronix DMM4000: TL705 697-4219 , TL710 697-4216 , TL725 697-4203 ,
TP750 697-4207 , Y8846S 697-4213 , Y8846D 697-4222
Supplied with: UK & Euro mains lead, TL710 Test Lead Set, spare line power fuse, user manual on
CD-ROM, RS-232 to USB adaptor cable, National Instruments LabVIEW SignalExpressᓽ Tektronix
Edition, Limited Edition Software
DMM4040
DMM4050
Function
Range
Resolution (6.5
Typical
Typical Accuracy
digit)
Accuracy
(1Year)*
(1Year)*
Voltage DC
100 mV → 1000 V 100nV
0.0035 + 0.0005 0.0024 + 0.0005
Voltage AC (Freq 10 Hz 100 mV → 1000 V 100nV
0.06+ 0.03
0.06 + 0.03
to 20 kHz)
Resistance (2x4 Wire) 10Ω → 1 GΩ
10 μΩ
0.01+ 0.001
0.01+ 0.001
Current DC
100 μA → 10 A 100 pA
0.05+ 0.005
0.05+ 0.005
Current AC (Freq. 10 Hz 20 mA → 10A
100 nA
0.3+ 0.1
0.3 + 0.1
to 2 kHz)
Freq. Period
3 Hz → 1 MHz
6.5 digits
0.01%
0.01%
Capacitance (DMM4050 1 nF → 100 mF
1 pF
1% ±0.5%
only)
Temperature
-200 °C → 600 °C 0.001 °C
±0.8 °C
(DMM4050 only)
*Accuracy= ±(% of reading+% of range) unless otherwise stated
Description
Stock no.
DMM4040
DMM4050
697-4190
697-4200
Price per
unit
unit
OM
S$
1+
1+
1850·00
2280·00
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
Tektronix DMM4000 Series
Multimeter Accessories
CX506A
High-sensitivity (DC 33 kΩ / V) meter.
Capacitance measurement by built-in transistor oscillator.
Transistor check function.
Conforms to IEC 61010-1, Overvoltage category III, Pollution
Degree 2.
Accessories for the Tektronix DMM4000 series multimeters
Description
Stock no.
Price
per
OM
S$
697-4219
unit
1+
127·00
697-4203
unit
1+
169·00
488-4745
697-4207
unit
1+
843·00
SP-21 Multimeter
TL705 2X4 Wire Ohms Test
Leads
TL725 2X4 Wire Ohms SMD Test
Tweezers
TP750 RTD Temperature Probe
S$
S$
Stock no.
MX1 General Purpose Heavy
Duty Multimeter in Carry
Case
S424-8076
±2%
150mV
1500V
2.5%
5V
1500V
1kHz
DC Current Accuracy
DC Current Lowest Range
DC Current Highest Range
AC Current Accuracy
AC Current Lowest Range
AC Current Highest Range
Resistance Accuracy
Price per
unit
Stock no.
353-4304
OM
S$
1+
310·00
S$
Meterman
627-5749
Range
2.5/10/50/150/300V
50/150/300V
2K ohm/V
0.5/10/250 mA
20K ohm, 2M ohm
1.5 / 9V
unit
S$
1+ 151·00
Price per
OM
unit
Function
DC Voltage
2k/20k/2M
20
S$
S$
1+ 123·00
AC Voltage
DC Null
Meter
DC Current
Ranges
100mV, 250mV, 2.5V, 10V, 50V
250V, 1000V
10V, 50V, 250V, 750V
±5V, ±25V
Sensitivity
20kΩ/Volt
9kΩ/Volt
9kΩ/Volt
40kΩ/Volt
Accuracy
100mV ±5% FSD
Other ranges ±3% FSD
±4% FSD*
±5% FSD
Voltage drop 0.25V FS (0.1V on
50μA)
Resistance 2kΩ, 20kΩ, 200kΩ, 2MΩ,
Test current 150mA max on 2kΩ
200MΩ
range
*Frequency range 30Hz-10kHz ±3% on 10Vac range
±5% FSD
50μA, 2.5mA, 25mA, 0.25A
Stock no.
422-2535
Price per
unit
OM
S$
1+
72·00
±3% rdg (200MΩ ±5%
rdg)
S$
S$
AC Current Adaptors
ISO-TECH ICA3000 Flexible
3000A ac Current Probe
Dual range Current Probe suitable for multimeters,
recorders and data loggers
2 selectable ac current ranges, 300A and 3000A
2 output sensitivities, 300mV/A and 1V/A
Wide bandwidth, low phase shift
Terminated with right angle 4mm shrouded plugs
Suitable for use with multimeters, recorders and data
loggers
Complies with EN61010-1 Cat III, 600V
Supplied with: 2 off AA alkaline batteries and Operator
Manual
Accuracy
All ranges ±5%
All ranges ±5%
All ranges ±5%
All ranges ±5%
: ±10% of good/bad line
200 mA / 250V ceramic fuse (PN FP150)
300V
Price per
S$
A leading analogue meter featuring null (zero centre) capability.
Latest design technology is incorporated and the meter is
housed in a robust case making it durable and shockproof.
Drop/Shock proof taut band movement
Null meter facility: ±5/±25 Vdc
Resistance measurment up to 200MΩ
Capacitance measurement up to 10μF
Test leads conveniently store in case
Size 129 x 160 x 42mm, weight approx 320g
Supplied with: Instruction booklet and carrying strap
Standards: IEC 1010 CAT II conformity
A low cost pocket sized analogue multimeter for general usage.
High sensitivity taut band movement
5 functions/15 ranges
Small compact size for portability
Special ranges to test household batteries
Ohm zero adjust
CAT ll 300V rating
Stock no.
unit
S$
YX-360TRF
2%
50μA
10A
2.5%
500mA
10A
2.5%
Meterman AM8B Pocket Size
Function
DC Voltage
AC Voltage
Input Impedance
DC Current
Resistance
Battery Test
Overload Protection
DC Current
Voltage Resistance
OM
DC Voltage (V) 300m/3/12/30/120/600 Resistance (Ω)
AC Voltage (V) 12/30/120/300/600
DCV input resistance (kΩ/V)
DC (A)
60μ/30m/300m
Combines the advantages of an analogue instrument with the
safety features and reliability of a digital instrument
9 DC voltage ranges: 150mV to 1500V
6 AC voltages ranges: 5V to 1500V
7 DC current ranges: 50μA to 10A
6 AC current ranges: 500mA to 10A
3Ω ranges to 20kΩ
-6 to +15dB scale for AC measurements
Diode test capability with Ωx1 range
Mains proof ohms range
10kA fuse protection on current ranges
High speed continuity bleeper (<150Ω)
Audible warning if >5V is applied to Ω range
Visual warning if protection fuses blown
Locking system prevents test leads falling out
IP65 rated case which cannot be opened with test leads connected, plus moulded-on shock
absorber
Safety Rating: EN61010-1 CAT II 600 V
Supplied with: a rugged carry case, test lead set, spare fuses, battery and instructions.
DC Voltage Accuracy
DC Voltage Lowest Range
DC Voltage Highest Range
AC Voltage Accuracy
AC Voltage Lowest Range
AC Voltage Highest Range
AC Voltage Max Frequency
Price per
Drop Shock Proof Meter
Null meter(±6V,±30V)
Safety design according to IEC 1010-1 Standard
Comes with tilt stand
Comes with continuity buzzer function
To IEC1010 CATIII 600V
Analogue Multimeters
Stock no.
DC Voltage 120m/3/12/30/120/300/1000 Transistor 0 - 1000
(V)
gain hFE
AC Voltage 3/12/30/120/300/750
DC input
33 kΩ/Volt
(V)
sensitivity
DC Current 30
General Specifications
μA/0.3mA/3mA/30mA/0.3A
Resistance 5k/50k/500k/5M/50MΩ Power
R6 (IEC) or UM-3 1.5V x2,
ranges
Source
6F22 9V x1
Capacitance 50pF-0.2μF/0.01-20μF/1- Size (HxWxD) 165 x 106 x 46mm, 370g
ranges
2000μF
& weight
OM
S$
1+
32·50
S$
S$
AC Current Range
Output select
Output signal
AC Current Accuracy
Linearity (10 to 100%)
Phase error
Bandwidth (-3dB)
Battery
Battery life (typical)
Measuring head length
Probe lead length
Output lead length
Weight
Dimensions
New products available online every week
300A
300mV
1V
1mV/A
3.33mV/A
1% of full scale
0.2% of reading
<±1%
10Hz to 10kHz
2 off AA alkaline
300 hours
610mm
1700mm
1700mm
430g
130 x 80 x 43mm
3000A
300mV
0.1mV/A
1V
0.333mV/A
95
2331
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
ICA 39T 1000A ac/dc Adaptor
Stock no.
697-3698
Price per
unit
OM
S$
1+
235·00
S$
S$
i2000 Flex 2000A a.c. Current Probe
Flexible and lightweight
a.c. coupled output (no d.c. offset)
3 selectable ranges up to 2000A a.c.
Fits around conductors up to 178 mm diameter
Voltage output of 2V full scale for each range
Suitable for use with multimeters, recorders and data
loggers
Plugs directly into instruments with 4mm input sockets
Conforms to EN61010-1 CAT III 600V
Supplied with: 2 x AA alkaline batteries and operators
manual.
Contact RS for calibration requirements
Measuring ranges20A/200A/2000A a.c.
Output sensitivity 100mV/10mV/1mV
Minimum load 100kΩ
Phase error
1° (45Hz to 65Hz)
Output
connection
Power supply
0.5m cable with 4mm shrouded safety
plugs
2 x AA MN1500 LR6 batteries
Stock no.
S645-1842
Price per
unit
Current ranges
Output
AC accuracy 40-400Hz
(23°C ±5°C)
DC accuracy
(23°C±5°C)
Battery life
Weight
Dimensions
Measuring head
cable length
Connecting cable
length
Jaw position error
Max conductor size
Battery life
200 hours continuous
370g
116 x 68.5 x 30mm (electronics)
610mm, double insulated
2m (between head and electronics)
S$
1+
619·00
S$
S$
Designed for use with digital multimeters, this adaptor uses
Hall effect sensors for measuring a.c. or d.c. current up to 600A.
Indicator warning if left switched on
Low battery warning indicator
Auto-power off after 15 minutes
Coiled output prevents tangled leads
Designed to meet BS EN1010-2-032 (safety standard) 300V Cat III
pollution degree 2
Supplied with: PP3 alkaline battery, storage wallet and
instructions.
Note: Colour may differ from that shown.
Accuracy (23°C
±5°C)
400 to 600A ±(2.5%
+2A) @ 45-65Hz
Output impedance 100KΩ (min.)
10mV per amp a.c. Jaw position error ±1% of reading
or d.c.
1mV per amp a.c. or Max. conductor 34mm diameter,
d.c.
size
20×40mm bus bar
±(2% +2A) to 400A Battery life
60 hours
Stock no.
697-3948
Price per
unit
OM
S$
1+
133·50
S$
S$
Stock no.
S653-6763
Frequency response (-0.5dB)
Output (load) impedance
Max. conductor size
Battery life
Price per
unit
OM
S$
1+
769·00
Description
S$
1+
276·00
S$
S$
i410
1-400A d.c.
±(3.5% of rdg+0.5A)
1-400A a.c. rms
± (3.5% of rdg+0.5A)
3 @ 400A
6 @ 200A
3 kHz
1mV/amp
IEC 1010, CAT III-600V
3
1MΩ/£100 pF
60 hours typical
Stock no.
S237-4218
S237-4224
Price per
unit
unit
i1010
1-1000A d.c.
±(2.0% of rdg+0.5A)
1-600A a.c. rms
±(2.0% of rdg+0.5A)
3 @ 600A
6 @ 300A
10 kHz
1mV/amp
IEC 1010, CAT III-600V
3
1MΩ/£100pF
OM
S$
1+
1+
402·00
653·00
S$
S$
Special Application Multimeter Adaptors
Fluke Fibre Optic Meter and Light Source
d.c. to 20kHz
>100kΩ and ≤100pF
19mm dia.
30 hours typical
S$
S$
The fibre optic meter (FOM) is a digital multimeter accessory
that allows fibre optic cable installation and maintenance
technicians to verify system performance.
The FOM is compatible with digital multimeters that have an
mV d.c. function and a minimum 10MΩ input impedance.
The FOS850-1300 fibre optic light source (FOS), available
separately, is a switch selectable dual infra-red LED light
source to simulate medium and high data transfer rates
Used with a light source the FOM can perform many tests on
multimode fibre optic cable systems including:
Single and duplex cable power loss
Transmitted power
Received power
Fibre optic cable continuity
FOM
Output
Application range
Acceptable fibre types
Operating range
Accuracy
Battery life
FOS
Description
Fibre Optic Meter
FOS850/1300 Light Source
My Account
www.rssingapore.com
95
2332
OM
Two rugged current clamp adaptors suitable for use with multimeters to
give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm
shrouded plug lead.
i410 1 to 400A d.c./a.c. rms
i1010 1 to 1000A d.c., 1 to 600A a.c. rms
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy
environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital
multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.
Contact RS for calibration requirements
Current Probe i410
Current Probe i1010
The i30 may be used in conjunction with multimeters,
recorders and other suitable recording instruments for
accurate non-intrusive ac & dc current
measurement.,Applications include: inverters, switch mode
power supplies, industrial controllers, automotive leakage
currents and other applications requiring accurate isolated
current measurement.
Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
1.5m flying lead terminated with 4mm shrouded plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A
Supplied with: Alkaline PP3 battery and operators manual.
0 to ±30A peak
±1% of reading ±2mA
±1mA
100mV/A
unit
AC frequency response
Output signal
Safety
Load impedance
Battery life
i30 30A High Resolution, High Bandwidth
Current Probe
Current range
Overall d.c. accuracy
Resolution
Output sensitivity
S697-3941
Price per
DC current range
DC accuracy
AC current range
AC accuracy
Crest factor @ max a.c. range
100A and 600A a.c.
or d.c. peak
600A range
ICA39T
Stock no.
Fluke i410 & i1010 Current Probes
OM
ICA32 ac/dc 100/600A Adaptor
Output:
100A range
100A a.c./d.c.
1000A a.c./d.c.
10mV/A
1mV/A
100A range: (0-100A) ±(1.9% +2A)
1000A range; (100-400A) ±(1.9% 7A)
1000A range: (400-1000A) ±(2.9% +5A)
100A range: (0-100A) ±(2.9% +2A)
1000A range: (100-400A) ±(1.9% +7A)
1000A range: (400-1000A) ±(2.9% +5A)
±1% of reading
51mm diameter or 24x 60mm busbar
66 hours Typical (alkaline)
Description
AC/DC Current Adaptors
Current ranges
1000A a.c./d.c. measurement
Hall effect sensor technology
Large jaw size suits cables or bus bars
DCA auto zero button
Coiled output leads with right angle shrouded 4mm plugs
Power on and low battery indicators
Complies with EN61010-2-0 32 CAT III 1000V
Supplied With: 9V PP3 alkaline battery, carry pouch with belt
loop and instructions.
OM = Order Multiple a New product to range
1mV per 1dB
800-1600nm
9-125 to 100-140μm
+3 to 50Bm
+/- 0.25dB absolute
+/- 0.15dB relative
16hrs min. 100hrs typ.
Stock no.
240-9487
240-9516
Price per
unit
unit
Wavelength:
Output power
Stability
Battery life
General
Operating temp.
Optical interface
OM
S$
1+
1+
886·00
1379·00
-20dBm
+/-0.2dB per 8 hours
16hrs min. 24hrs typ.
0 to 40°C upto 75% RH
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
Special Application Multimeter Adaptors:
Temperature
Test Set SPL2400
ISO-TECH ITA11
Thermocouple Adaptor
Converts any standard digital multimeter for temperature measurement up to 1000°C
(200°C with sensor supplied) through type K thermocouple probes.
Compatible with DMMs with 10MΩ input impedance
Selectable °C and °F range
Standard type K subminiature connector
Accuracy
Input protection
Ambient operating
temp.
-50 °C → -20 °C +/(2.0%+2 °C)
-19 °C → +350 °C +/(2.0% + 2 °C)
351 °C → 500 °C
±(2.0%+2 °C)
501 °C → 1000 °C
±(2.0%+2 °C)
60V d.c., 24V rms
0 °C → +50 °C
Stock no.
700-7812
Bead thermocouple supplied:
Temperature range
Tolerance
Temperature Range
(°C)
Output
Price per
OM
unit
-40 °C → 204 °C (-40 °F to
399 °F)
+/-(2.2°C) )C → 204 °C
-50 → +1000
1mV d.c per °C of °F
S$
S$
S$
Multi-head test lead set with 4 probe profiles to choose from
Interchangeable and reversible probe heads allow multiple combinations of connection and contact
Consists of a sprung point to 4mm plug (with hard point), which is reversible
2mm and 2.4mm plugs
Each probe screws firmly into main body
A tip protection cap can be used with the sprung point
The cap can be used as a tool to screw in probe heads
The angled 4mm shrouded connecting plugs and leads give a full reach of 1 metre
Rated to 1000V CAT II
Rated current 4mm 32A, 2.4mm 12A, 2mm 10A
Tip Diameter
Cable Length (m)
1+ 109·00
Fluke 80TK Thermocouple Adaptor
Stock no.
Plugs into any standard digital multimeter and operating through Type K
thermocouple probes, converts it to a digital thermometer.
Powered by PP3 battery (supplied)
Measures in °C and °F
Minimal stabilisation time needed as with thermocouple probes
Unshrounded plugs
Particularly suitable for measuring temperatures in hard to reach and
hazardous areas such as:
Finding hot spots in electrical connections and panels
Identifying hot bearings and motor windings
Identifying temperature differences in engine blocks
For suitable Fluke type K thermocouple probes, see 349-4190 etc.
Supplied with: PP3 battery, full instructions and bead thermocouple with
mini-connector.
Accuracy (18-25°C)
-20 → 350°C, 0·5% ±2°C
351 → 500°C, 1·75% ±2°C
501 → 1000°C, 2% ±2°C
Operating temperature
615-488
Price per
OM
unit
Stock no.
485-931
-50 → -21°C, 2·5% ±2°C
0 → +50°C
S$
S$
S$
OM
S$
1+
398·00
64·00
S$
S$
Stock no.
433-2597
Price per
unit
OM
S$
1+
69·50
S$
S$
S$
S$
S$
S$
S$
S$
4mm Test Leads with 4mm Sprung
Probes
Safety test lead set comprising of 1 red
and 1 black:
1m PVC flexible leads 1mm2 cross
section
4 mm sprung test probe to straight shrouded 4mm plug
Protective caps for test connection to IC’s (leg spacing
2.54 mm)
Rated 1000 V, CAT II 19 A
Description
Stock no.
4mm Sprung Set
a731-5172
Price per
unit
OM
S$
1+
31·10
PMS 4 Standard Set
± 1°C from 0°C → +100°C decreasing linearly to ± 3°C
at -50°C and at +150°C
±2 °C from 0°C → +100°C decreasing linearly to ± 4 °C
at -50°C and at +150°C
0.1°C on 300mV range of 3.5 digit DMM
-40°C → +70 °C
-12°C → +70°C
60V d.c., 30V rms
-50 to +150
Price per
S$
1+
Cable Length (m) 1
Voltage 1000 V; 600 V croc clip
Current (A)
32; 12 croc clip
1+ 225·00
unit
OM
1 set
A general purpose safety test set with 4mm shrouded leads,
test probes and crocodile clips. Tip protection heads
included with probes.
Universal temperature adaptor utilizing a P-N semiconductor junction as the
sensing element. The adaptor can be plugged into any standard multimeter
with input impedence of 1MΩ or greater to provide direct temperature
measurement up to 150°C.
Powered by PP3 battery (supplied)
Readings in °C or °F, selectable
Suitable for measurement of air, surface & non corrosive liquids
Battery check in off position
Supplied with: PP3 battery and instruction leaflet.
Ambient temp. (+0°C → +15°C &
+35°C → +50 °C)
Resolution
Probe body temperature range
Cable temperature range
Probe withstand Voltage
Temperature Range (°C)
Price per
32; 12; 10
1000 V
4mm Safety Test Prods
Fluke 80T-150U Temperature Adaptor
Accuracy:
Ambient temp. (+15°C → +35°C)
Current (A)
Voltage
4mm Test Leads
-50 → +1000
1mV d.c per °C or °F
Temperature Range (°C)
Output
Stock no.
424-4686
2, 2.4, 4 mm
1
High quality 4mm test lead set ideal for general laboratory
use.,Contents:
Red and black hard point test probes
Red and black gripper test probes
Red and black crocodile clips (clasping dia. 9.5mm)
Red and black PVC 1m stackable test leads
Maximum working voltage 60V d.c.
S$
S$
Cable Length (m)
Voltage
Stock no.
738-339
1
60 V dc
Price per
unit
OM
S$
1+
65·00
Shrouded Probe Set
2mm Test Leads
A very high quality test lead set comprising 2 PVC insulated
leads 1 metre in length, in red and black, fitted with 4mm
safety plugs (non-stackable) on one end and 4mm stackable
plugs with retractable shrouds on the other. Accessories
include 2 fully shrouded 4mm crocodile clips in red and black
and 2 fully shrouded rigid probes in red and black which
accept 4mm shrouded plugs and leads. Probes have finger
guards and removable safety caps to give non-slip contact
with IC legs. Test lead set is supplied in a zipped PVC wallet.
Rated at 150V, (CAT II) 32A.
Low Voltage Test Lead Set
A miniature test lead set comprising leads, probes, clips and
adaptors to give quick and easy access to circuitry. Supplied
in a convenient zipped PVC bag. Maximum working voltage:
30V a.c./60V d.c.
Kit Contents
Red
405-411
405-455
445-015
500mm, 2mm leads
2mm Croc. Clips
4 to 2mm adaptors
Tip Diameter
Cable Length (m)
Stock no.
405-499
2
0.5
Price per
unit
Black
405-427
405-461
445-009
Stock no.
483-5298
Current (A)
Voltage
Price per
unit
OM
S$
1+
80·50
10
30 Vac; 60 V dc
OM
S$
S$
S$
1+ 152·50
Many more leading brands from over 2,500 suppliers available online
95
2333
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
High Spec, IEC 1010, 1000V
Cat III, Multimeter Test Lead
Set
Low Voltage Shrouded Test Lead Set
A test lead set with leads, prods and clips fully insulated
employing the 4 mm shrouded system.,Apart from the
crocodile clips the kit contents conform to VDE 0100 with a
maximum operating voltage of 1000V, (CAT III). The set is
supplied in a convenient zipped PVC wallet.
Kit Contents
Red
Black
Test probes (pluggable)
203-9684
405-528
Flexible probes, red and black with spring loaded plunger and crossover claws.
1 metre test leads with shrouded plugs
261-5496
261-5503
Crocodile clips
248-7847
248-7869
Cable Length (m)
1
Voltage
1000V; 30 Vac, 60 Vdc croc clip
Current (A)
32; 15 croc clip
Stock no.
405-506
Price per
OM
unit
S$
S$
S$
Test Lead Set supplied in a blister pack that provides a range of
accessories suitable for many measurement applications.Set
Contents:
2 x 1.2m silicone rubber leads terminated with one 4mm shrouded
right angle plug and one 4mm shrouded straight plug
1 x 4mm shrouded straight plug
2 x plug-in multimeter probes
2 x spring-loaded grabber hooks
2 x crocodile clips
Additional Fused Test Prods to fit the multimeter Test Lead Set are available and are necessary to
provide a safe means of voltage measurement on high energy circuits. Meeting the requirements of
GS38 safety guidance and IEC1010 cat III 1000V safety standard, each prod is fitted with a 500mA
1000V HRC fuse.
Add-on Crocodile Clips can be combined with the Fused Test Prods and multimeter Test Lead Set to
provide a fused crocodile clip configuration maintaining the requirements of GS38 and IEC 1010 Cat III
1000V.
1+ 143·50
4mm Safety Test Lead Set
Test lead set, consisting of 1 red and 1 black:
4 mm safety test leads, right angle shrouded 4mm plug to straight
shrouded 4mm plug, silicone insulated, 100 cm long, 1.0 mm2, 19
A
Push-on safety insulated crocodile clips with strong jaws and
surface for fine wire
Push-on safety test probes, stainless steel, rigid, with protective
cap for contact with individual IC legs (spacing 2.54 mm)
Push-on safety test clips with strong jaws insulated on the outside,
max. 16 A
Rated voltage 1000 V, CAT II
Cable Length (m)
Current (A)
1
16
Voltage
Description
Test Leads Set
Fused Test Prods
Crocodile Clips
Current
15 A
500 mA
15 A
Description
Stock no.
Test Leads Set
Fused Test Prods
Crocodile Clips
207-9913
425-3826
388-4110
Fused
No
Yes
Yes
Standards
IEC 1010, 1000V Cat III
IEC 1010, 1000V Cat III GS38
IEC 1010, 1000V Cat III
Price per
unit
unit
unit
OM
S$
1+
1+
1+
52·00
45·10
16·80
OM
S$
3+
5·30
OM
S$
Stock no.
207-9913
425-3826
388-4110
S$
S$
S$
S$
S$
S$
S$
S$
Accessories
Description
Stock no.
1000V 500 mA Fuse
1000 V
388-4132
Price per
unit
IEC 1010 Safety Kit
Stock no.
518-1019
Price per
1 set
OM
S$
1+
94·00
S$
S$
Standard Test Lead Set
Silicone rubber leads, probes and prods, supplied together with
other useful test connectors. Max. working voltage: 50Va.c.
A fully shrouded test lead kit meeting the safety
requirements of IEC 1010.Contents:
Red & black hard point test probes (with
protection caps)
Red & black gripper test probes
Red & black crocodile clips (clasping dia. 9.5mm)
Red & black PVC 1m stackable test leads
Contents
Silicone Rubber Lead Red
Silicone Rubber Lead Black
Flexible Probe Red
Flexible Probe Black
488-416 Test Prod Red
488-422 Test Prod Black
423-633 2 off Crocodile Clips
423-649
423-611
423-605
483-837
Fused
Standards
No
IEC 1010, 1000V Cat III
Stock no.
Stock no.
Price
per
450-9400
1 kit
OM
S$
S$
196-2555
S$
Price per
OM
1 kit
S$
S$
S$
1+ 109·50
Price per
unit
No
IEC 1010, 1000V Cat III
340-2421
Micro test lead set for testing very small components:
Maximum working voltage 60Vdc.
Kit comprises:
Sprung test probes red and black
Micro clips red and black
Miniature crocodile clip
775-681
Fused
Standards
Stock no.
PMS 0.64 Micro Set
Stock no.
1+ 138·00
Suitable for most instruments including units that do not
accept shrouded 4mm safety plugs
Complies to EN61010 1000V CATII
Supplied in handy PVC wallet with instruction leaflet
Contents:
2 each (1 red & 1 black): 1.2m long shrouded 4mm plug
(probe end) retractable 4mm plug (equipment end)
Sprung hook
Test prod
Crocodile clip
Spade terminal connector
Automotive test lead set comprising
2 pairs of silicone insulated test leads, 1.2m long, terminated in
4mm shrouded sockets
1 pair of fully insulated crocodile clips, with wide opening jaws
ideal for battery terminals
1 pair of cable piercing prods
1 pair of thin back probing probes for access into the rear of
automotive cable connectors. Spring steel probes give greater
flexibility and cause less damage to rubber connector seals
10A current rating
Supplied in durable plastic wallet roll
612-0835
unit
Insulated Test Lead Set
1+ 113·50
Automotive Test Lead Kit
Stock no.
Price per
OM
S$
1+
85·00
S$
Price per
unit
S$
www.rssingapore.com
95
2334
OM = Order Multiple
* manufacturers information unavailable at time of printing
OM
S$
1+
72·00
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Multimeters
Multimeter Lead Set in Pouch
GS38 Test Leads
RS Fused Test Leads 600V CAT III
These 600V r.m.s. rated fused test leads meet the HSE GS38
safety recommendation.
A 500mA, 50kA breaking capacity fuse is fitted to provide
protection against electrical arcing being sustained
through the test leads
Probe tips are shrouded leaving only 2mm of exposed metal to prevent inadvertent bridging of live
conductors
Double insulated silicon rubber cable indicates wear and damage to the leads via white inner layer
of insulation
Safety crocodile clips with finger guards are available separately
Note: Although suitable for use with most multimeters this lead set is not recommended for use with
Thurlby 1905, 1503, Thandar digital, Fluke 8010, 8050, Beckman DM25XL, DM93, DM98, AVO8,
AVO2001 and ITT MX112 Multimeters.
Description
Tip Diameter
Voltage Fused
Probe Type
Stock no.
Fused test lead set
3.5 mm
600 V
*
Straight
212-966
Crocodile clip set
–
–
Yes
*
212-972
Description
Stock no.
Fused test lead set
Crocodile clip set
Price per
212-966
212-972
unit
unit
OM
S$
1+
1+
64·50
26·20
S$
S$
Description
Stock no.
1000V 500 mA Fuse
Price per
388-4132
unit
OM
S$
3+
5·30
S$
816-029
Price per
unit
Description
OM
S$
1+
29·20
S$
204-583
204-599
388-4132
Price per
unit
unit
unit
Fused
Yes
Yes
–
OM
S$
1+
1+
3+
74·50
74·50
5·30
Standards
GS38
GS38
–
S$
Stock no.
204-583
204-599
388-4132
S$
Description
Fused test lead set, 3-phase
600V 500 mA Fuse
Standards
GS38
–
OM
S$
212-988
481-0980
unit
bag of 3
1+
1+
86·50
16·70
S$
3+
1+
5·30
16·70
Maximum input voltage
Overvoltage Cat II
Pollution degree 2
Temp. coefficient
DC volts accuracy
AC volts accuracy
Input resistance
Output attenuation derating (dependant on load capacitance)
Operating Temperature
360-0300
S$
S$
Price per
40kV dc
28kV rms (0 to 300Hz)
<200ppm/°C
±1% (to 20kV); ±2% (to 40kV)
±2% (to 15kV) ±3% (to 28kV)
1000MΩ approx.
0dB @ 0Hz (d.c.) derating linearly to -3dB @ 300Hz
0 °C → +50 °C
OM
unit
S$
S$
S$
1+ 225·00
Crocodile Clip Test Lead Sets
Small Crocodile Clip to 4mm Diameter Plug
TLA-117
TLA-118
Price per
OM
unit
bag of 3
1000:1 voltage divider type high voltage probe
For EHT checking with any digital multimeter on voltage
ranges with 10MΩ input resistance
4mm shrouded safety plug connectors and earthing
crocodile clip
90cm ground lead length; 1m cable length
Standards: EN 61010-01 & EN 61010-2-031.
Supplied with: Screw in tip and screw in hook.
Manu. Part No.
Stock no.
Price per
388-4132
481-0980
Insulation resistance
DC500V 100MΩ
Dielectric strength voltage
AC2000V one minute or more
Length
500mm (Leading edge section)
Cable diameter
0.3mm2
Set contents
Red, black, yellow, white, blue, green (1 of each, 6 in all)
Red, black (5 of each, 10 in all)
3 Phase Test Leads, 600V CAT III
3 phase voltage or continuity measurements
Probes are rated at 600V CAT III and fitted with a 50kA, 1000V,
500mA fuse to protect against electrical arcs
Each probe is fitted with a safety crocodile clip along with
finger guards
Additionally a single probe tip is supplied so that one of the
three leads may be used as a prod
Description
Voltage (V)
Fused test lead set, 3-phase
600
600V 500 mA Fuse
660
Stock no.
40kV High Voltage Probe
Stock no.
1000 V
Tip Diameter
3.5 mm
3.5 mm
–
Stock no.
S$
40kV High Voltage Probe
A 1.2m fused test lead set offering a high degree of
protection to the user when measuring on high energy
circuits up to 1000V CAT III.
The leads are available with either straight 4mm plugs with
retractable shroud, or with right angled shrouded plugs.
Each lead is fitted with a 500mA 1000V 50kA HRC fuse
within totally touch proof integral fuse holders
High quality silicone insulated cable, resistant to heat,
chemicals, oils and abrasions, with yellow inner insulation
to serve as a wear indicator
Large screw-in crocodile clips with a 20mm jaw opening
with integral finger guards
Strain relief is provided at each end of the leads.
Supplied in a plastic wallet, this test lead set is available with straight or right angled 4mm plugs and is
suitable for use with most multimeters and insulation testers.
Note: Right angled versions are not recommended for use with Megger BM100, BM101, Thurlby 1905,
1503, Fluke 8010, 8050, Wavetek DM25XL, DM93, DM98, AVO 8, AVO 2001 and ITT MX112
multimeters. For these models straight versions are more suitable.
Fused right-angled test lead set
Fused retractable test lead set
1000V 500 mA Fuse
S$
S$
RS Fused Test Leads 1000V CAT III
Description
S$
1+ 96·00
3+
5·30
1+ 120·00
Dimensions: Ø6.35 x 32 mm
Current: 500mA
Straight
GS38, IEC 1010-2
Voltage
Description
Fused right-angled test lead set
Fused retractable test lead set
1000V 500 mA Fuse
OM
Spare Fuses for Test Leads
1000V 500 mA Fuse
600V 500 mA Fuse
Stock no.
unit
unit
unit
Test Lead Fuses
For use with the ISO-TECH IDM 17 DMM, ,meets HSE GS38
recommendations for use on power circuitry.
Supplied with: Fully insulated screw-in croc clip.
Probe Type
Standards
Price per
731-5277
388-4132
731-5273
S$
Fused Test Lead with
Crocodile Clip
Voltage 450 Vac/dc rms
Fused Yes
Stock no.
Multimeter lead, standard set
1000V 500 mA Fuse
Multimeter lead, fused set
Accessories
Description
Practical lead sets supplied in a durable grey pouch with attractive
yellow piping.,Standard Set has a wide range of accessories for taking
measurements in most situations.,Fused Set has additional fused test
probes complying with the requirement of GS38 safety guidance for use
on high energy circuits whilst taking voltage measurements.,Both sets
comply with IEC1010-1 cat III 600V safety standard.,Contents standard
set:,2 x 1.2m silicone multimeter leads with shrouded 4mm terminations
one end straight, one end right angled, (red and black),2 x crocodile clips
(red and black), 2 x long reach multimeter probes with removable 4mm
tip exposure adaptors (red and black),2 x spring loaded
&#146;grabber&#146; multimeter probes (red and black),Additional
items in fused sets,2 x fused probes with only 4mm of exposed metal tip
fitted with 1.25in ceramic fuses rated at 660V 500mA.
S$
Stock no.
212-988
481-0980
S$
Stock no.
606-0216
605-7383
Price per
unit
unit
OM
S$
1+
1+
22·70
32·50
S$
10+
10+
S$
22·60
32·40
Small Crocodile Clip to Hook Clip Leads
Resistance
Dielectric strength
voltage
Length
Cable diameter
Manu. Part No.
TLA-115
TLA-116
DC500V
Set contents
100MΩ
AC2000V 1minRed, black, yellow, white, blue, green
(1 of each, 6 in all)
500mm
Red, black (5 of each, 10 in all)
0.3mm2
Stock no.
605-7361
605-7377
Price per
unit
unit
OM
S$
1+
1+
23·60
27·90
S$
10+
10+
S$
23·50
27·80
95
Visit our website for additional price information and exciting promotions
2335
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Multimeters
Connector Miniature Clip Test Leads
Key to photo:
Top left: TLA-1, Top right: TLA-2
2nd left: TLA-3, 2nd right: TLA-4
3rd left: TLA-6, 3rd right: TLA-7
Bottom left: TLA-13, Bottom right: TLA-14
TLA-6 and TLA-7 clip sections are gold plated
Insulation resistance
DC500V: > 100MΩ
Length
Dielectric
Manu Part Clip body length Wire size
(mm)
strength
No
(mm)
(mm2)
TLA-1
33
0.1
450
1 kV AC
TLA-2
47
0.3
560
2 kV AC
TLA-3
60
0.5
760
2 kV AC
TLA-4
47
0.25
560
2 kV AC
TLA-6
33
0.3
450
2 kV AC
TLA-7
47
0.3
560
2 kV AC
TLA-13
33
0.1
200
1 kV AC
TLA-14
33
0.1
450
1 kV AC
Set contents
TLA-1
TLA-2
TLA-3
TLA-4
TLA-6
TLA-7
TLA-13
TLA-14
Teishin Electric
Plug-in Type
Selection Guide
TL-21
Test Leads for
CAM600S, ECD100, ECD130, ECDM200R, EPC100
ESP21
TL-61T Test Leads for CD800, ESP-18D
TL-88
Test Leads for DCM400AD, DCM400, DCM60L
TL-508S Test Leads for DM1528S, DM508S, DM1008S
Current
rating
1A
3A
5A
3A
3A
3A
1A
1A
Manu. Part No.
Stock no.
TLA-1
TLA-2
TLA-3
TLA-4
TLA-6
TLA-7
TLA-13
TLA-14
429-5274
429-5280
429-5296
429-5319
429-6211
429-6227
606-0222
606-0238
Price per
1 set
1 set
1 set
1 set
1 set
1 set
unit
unit
Price per
353-4326
353-4168
384-1321
384-1337
unit
unit
1 set
unit
OM
S$
1+
1+
1+
1+
18·90
9·40
15·40
33·30
S$
S$
S$
S$
Fluke Accessories
ToolPakᓽ Version 2
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
13·00
15·10
12·20
17·10
16·60
20·70
11·90
12·30
S$
10+
10+
10+
10+
10+
10+
10+
10+
S$
12·90
15·00
12·10
17·00
16·50
20·60
11·80
12·20
Kit includes 2 Universal hanging clips, 2 straps, 70 Series
adapter and an attachment magnet
Meets most hanging needs for these instruments
Attaches to the back of 80 series IV, 725, 70 series III, 20
series III and 50 series II Digital Multimeters and
Thermometers
Stock no.
384-4572
Price per
unit
OM
S$
1+
69·10
High Voltage Probes
Multipin Connector Test Lead Set
Multipin connector Test lead kit
Purpose designed kit to provide a safe
solution to probing high density
mulipole connectors. The unique
design avoids the dangers of shorting electrical contacts
and the risk of dropping pins or other foreign bodies into
sensitive or critical equipment. The various sized male /
female contact pins supplied suit applications in the
majority of multipin connectors including Mil-C, Industrial
& circular plastic connectors , D-Sub, XLR & PCB headers
Compatible with all standard shrouded 4mm instrument
sockets
Applications include aeronautical, military, automotive
and computer equipment testing
Complies with EN61010-1 CAT III 600V
Lead length: 1.2m
Kit comprises 1 each red & black insulated silicone test lead with standard 4mm shrouded right
angle plug end and unique screw-in pin socket at the other end. 2 sets of 4 screw in pins each with
a male & female contact. 1 green double insulated earth lead with detatchable crocodile clip. 1 each
red and black extender bar
Supplied in durable plastic case with custom two colour foam cutouts that instantly identify if any
of the pins are missing.
Type
Connection Type
Stock no.
TL-21
TL-61T
TL-88
TL-508S
Red, black, green, yellow, white (2 of each)
Red, black, green, yellow, white (2 of each)
Red, black, green, yellow (1 of each)
Red, black, green, yellow, white (2 of each)
Red, black, green, yellow, white (1 of each)
Red, black, green, yellow, white (1 of each)
Red & black, 200mm (5 of each)
Red & black, 450mm (5 of each)
Manu. Part No.
Sanwa Multimeter Test Leads
Two high voltage probes allowing a digital multimeter to measure
up to:80K-6 6,000V
80K-40 40,000V
1V/1000V output when connected to a 10MΩ multimeter
Ground tip included
Designed for low energy applications only
Manu. Part No.
80K-6
80K-40
Stock no.
384-4235
384-4241
Price per
unit
unit
OM
S$
1+
1+
200·00
350·00
S$
Carrying Cases - Sanwa
Hard Cases for Sanwa Multimeters
C-CA
C-SP
Case for CX-506
Hard case for SP21
Connector Kit
Shrouded Right Angle Plug
Stock no.
a731-5286
Price per
unit
OM
S$
1+
297·00
S$
S$
Manu. Part No.
C-CA
C-SP
Stock no.
353-4067
353-4310
Price per
unit
unit
OM
S$
1+
1+
32·40
31·40
S$
Simply visit www.rssingapore.com and click on
‘My Account’ to register, or if you need help,
call our team on 65 6865 3433 who are happy
to assist.
95
My Account
www.rssingapore.com
2336
S$
OM = Order Multiple a New product to range
S$