The Americana Collection
GOLIATH
Indoor/Outdoor — FL, MH, LED
3
4
SERIES
You can also choose from existing
Americana models
—see following page
for all available styles.
GO
SIZE
***Diffuser Shape predetermined by model design
—Consult Factory for Custom Requirements
7
S
L
8” [A] x 38” [B] x 4” [C] — ADA
8” [A] x 51” [B] x 4” [C] — ADA
HRD
RE
TI
GO-S-CR [Carmi]
6
Goliath Series
SHAPE
TO SPECIFY: Series – Size – Style ***
5
order example:
GO-S-RE-4-BX-[2]36-UNV-EBX-PA
Half-Round Diffuser
Rectangular Diffuser
Triangular Diffuser
STYLE
9
10
11
12
Choose any model 1 through 12 [see illustrations].
Style 8 = Custom Cage Design—design your own cage.
You can also choose from existing Americana models—refer
to the following page for available styles.
LAMP TYPE
BX
Biax Mini-Fluorescent
T5
T5HO
T5 Miniature Bi-Pin
High Output T5 Miniature Bi-Pin
T8
T8 Medium Bi-Pin
MU/MD
Metal Halide Uplight or Downlight PAR Lamp
LED
Light Emitting Diode
LU/LD
Light Emitting Diode Uplight or Downlight
NO. OF LAMPS/WATTAGE; COLOR TEMPERATURE
Select from the Lamping Table [*Consult Factory on wattage
restrictions for PF and/or SSD models]
±3000K LED/QL Color Temp
±4000K LED/QL Color Temp
CT3
CT4
±5000K LED/QL Color Temp
CT5
VOLTAGE
120
277
347
UNV
RE
BX
38”
51”
T5
TI
T8
[2]24
[2]36
[1-2]21
[1-2]39
[1-2]25
[2]36
[2]39
[2]40
[1-2]28
[1-2]54
[1-2]25
[1-2]32
BALLAST
HRD
EBX
MU/MD
Richmond Series
LED
PAR20[1]39
25
PAR20[1]39
50
LU/LD
Richmond Series
[1-2]30
[1-2]30
BALLAST: 120 or 277 Volt, extreme temp range -30°C
to 90°C, HPF electronic ballast [EBX] for FL.
Metal Halide: HPF QV/Pulse Start Magnetic Ballast is
Standard; Optional Electronic Ballast [EBMH].
BACKBOX: 16 ga aluminum. Wire access through .875”
dia. KO on four sides and back. Water tight. Standard
with emergency battery, H.I.D. and some fluorescent
models. Optional for surface conduit entry.
BACKPLATE: 16 gauge aluminum
CAGE: Standard 0.5” square aluminum extruded bars
secured by hidden means to the frame. Standard configurations shown; custom spacing available. Optional
[PF] perforated alum. insert and/or shield [SSD].
DIFFUSER: Translucent white non-yellowing 100% virgin acrylic. Fully enclosed. Clear top and bottom [CLTB]
is Standard with Uplight or/and Downlight; Optional with
other types of lamping. Optional Opaque top, bottom or
both [OTB]. Optional Open [OPTB] top and/or bottom—
Indoor Only.
0-10V low-voltage LED Dimming
CLTB
Clear Top & Bottom [Std with Up/Downlight]
CA
CU
DIM
FUS2
H/L
LEC5*
LEC10*
Due to continual innovations and improvements all specifications are subject to change without notice.
Product Specifications
0-10D
FUS
Type
GASKETING: High temperature and non-aging neoprene rubber and/or black EPDM completely around the
perimeter of the lens and around the rear wire entrance
hole. Protects against dust, moisture and outside
contamination.
LENS FASTENERS: 2 Stainless steel tamperproof screws.
MOUNTING: Access hole in center for indoor mounting
to a J-BOX. For indoor/outdoor use .25” diameter bolts in
4 holes, .3125” diameter.
PAINTED FINISH: Pre-treated highly durable oven
baked polyester powder finish. Corrosion and Weather
resistant.
UL/ULC LISTED Suitable For Wet Location.
NOTE: *For Dimming and Emergency Options
refer to Dimming Ballast Table and Emergency Battery Table located at the end of a catalog under “Technical Info/Miscellaneous/Emergency” tab.
09.01.15
Two Electronic Ballasts
OPTIONS
EM
Catalog Number
Project Name & Location
Electronic Ballast
2EBX
NO. OF LAMPS/WATTAGE
120 Volts
277 Volts
347 Volts
120~277 Universal Volt
Aluminum Backbox/Surface Conduit [2” deep]
Custom Requirements
Dimming Ballast
*Refer to DIM Table for options
Emergency Battery [CA req’d]
– Must Specify Voltage [120V or 277V];
Refer to EM Table for options]
Fuse and Fuseholder
Double Fusing
Dual Circuit for High/Low Light Level for LED
*
LED Emergency Circuit [1] Five Watt
LED Emergency Circuit [2] Five Watt
*Must Specify Voltage for incoming EM Circuit [by others]
A = 12VDC; B = 120VAC; C = 24VDC; D = 277VAC
MD Integral Motion Detector
– Specify "A" for single circuit-all on, all off;
"B" for dual circuit, half on half off
OTB Opaque Top & Bottom
OPTB Open Top & Bottom [indoor only]
PF Aluminum Perforated Decorative Insert*
PHT1 Integral Photocell 120V [req’s CA]
PHT7 Integral Photocell 277V [req’s CA]
REM
SSD
TPD
FINISH
BK
BZ
CC
PA
SV
WHT
Remote Emergency Batteryself-contained in CA
– Must Specify Voltage [120V or 277V];
Refer to EM Table for options]
*
Solid Shield Insert*
Tamperproof Screwdriver
** Perfex Finish
Black
Bronze
Custom Color [Specify RAL#]
Painted Aluminum
Silvadillo Gray
White
CGF design Inc | PO Box 911 | Morton Grove, IL 60053 | p: 847.815.5079 | f: 847.470.9828 | http://www.cgfdesigninc.com | sales@cgfdesigninc.com
2
1
BONUS
13
The Americana Collection
GOLIATH cage styles
A
CGF design Inc | PO Box 911 | Morton Grove, IL 60053 | p: 847.815.5079 | f: 847.470.9828 | http://www.cgfdesigninc.com | sales@cgfdesigninc.com
14
A
A
B
B
Boston [BN]
Carmi [CR]
Dayton [DN]
A
A
A
A
B
Louisville [LV]
A
A
Morris [MO]
Pueblo [PB]
Pullman [PL]
A
A
A
B
Tahoe [TH]
B
Topeka [TK]
A
B
Welch [WE]
09.01.15
A
B
B
Quincy [QN]
Mobile [MB]
Miami [MI]
A
B
B
B
Mesa [ME]
A
B
B
A
B
Maui [MA]
Dixon [DI]
Detroit [DT]
A
B
Martin [MT]
B
B
B
B
Artesia [AE]
B
A
A
A
Richmond [RD]
B
Roswell [RO]