a
IX INTERNATIONAL CONFERENCE
ON COMPUTATIONAL HEAT AND MASS TRANSFER
ICCHMT 2016
23-26 May 2016, Kraków, Poland
CONFERENCE PROGRAM
Cooperating journals
Conference Venue
GALAXY HOTEL
Gęsia 22A, 31-535 Kraków,
Poland
Official Conference Sponsors
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
About ICCHMT
The IXth International Conference on Computational Heat and Mass Transfer aims to bring
together leading academic scientists, researchers and engineers to exchange and share their
experiences and research results about all aspects of computational techniques and methods is an
evolutionary field, from macroscopic−level to nano−level, and from continuum to discrete
mechanics.
ICCHMT also provides the premier inter-multi-trans-disciplinary forum for researchers,
practitioners and educators to present and discuss the most recent innovations, trends, and concerns,
practical challenges encountered and the solutions adopted in the field of:
Discrete Methods,
Lattice Boltzmann Method,
Molecular Dynamic Simulations,
Cellular Automata,
Recent developments on Navier−Stokes
Equations solvers,
Validation of computational methods,
Multi-phases, gas-liquid, liquid-solid, etc.,
Solidification and melting,
Complex chemical reaction modeling,
Monte Carlo Method,
Reactive Flows and Combustion,
Internal Flow and Heat Transfer,
Double-diffusive convection,
Microgravity Sciences and Processes.
Porous media heat transfer
Enhanced heat transfer
Heat Exchangers
Steam and Gas Turbines
ICCHMT is an international conference that is widely recognized and respected
in the international scientific community. ICCHMT is organized by University of Calgary for over
15 years in different parts of the world:
Magusa, Cyprus (1999), Rio de Janeiro, Brazil (2001), Banff, Canada (2003), Paris, France (2005),
Canmore, Canada (2007), Guangzhou, China (2009), Istambul, Turkey (2011, 2015).
For the first time in its history, ICCHMT is being organized in Kraków, Poland, in cooperation
with the Institute of Thermal Power Engineering, Faculty of Mechanical Engineering, Cracow
University of Technology.
Conference Organizers
Institute of Thermal Power Engineering,
Cracow University of Technology,
Kraków, Poland
www.imiue.mech.pk.edu.pl
SCHULICH School of Engineering,
University of Calgary,
Alberta, Canada
www.schulich.ucalgary.ca
The ICCHMT 2016 conference is organized under
the honorary patronage of
prof. Jacek Majchrowski,
Mayor of the City of Cracow
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Cracow University of Technology
As a whole, the Cracow University of Technology
makes an outstanding contribution to Kraków’s
scientific and cultural accomplishments.
By realising its goals, the University of Technology
works towards creating a national, European and global
space for research and education. It thrives towards
interdisciplinary studies and research, combining
technical science with mathematical, environmental,
economical, legal and social sciences, using information technologies. It develops the ability to selfeducate in students, giving them a good basis for work on the modern market, arising with the
development of civilization.
The Cracow University of Technology is a public research entity with a research staff,
including 55 full professors, 138 associate professors, 542 assistant professors, 238 researchers,
and 16 949 Ph.D., Masters and Bachelor students.
Institute of Thermal Power Engineering
Professor Jan Taler is a Head of the Institute of Thermal Power Engineering, that belongs to
the Mechanical Engineering Department of CUT and is one of the leading institutions in power
engineering in Poland.
The Institute provides a wide range
of research and education in the field
of
advanced
energy
technologies.
Moreover, it performs expert works for the
power sector, as well as investigations
of the most advanced technologies
for energy generation. Thus, the Institute provides technical solutions and advanced analysis for the
broad range of power technologies, such as thermal power engineering, process engineering, clean
coal and gas technologies, renewable and sustainable energy sources.
Scientific activity of the Institute of Thermal Power Engineering results in cooperation with
many industrial and scientific partners, at home and abroad, and providing numerous
implementation for the industry, involving:
design, optimization, and monitoring systems for power boilers,
shortening the start-up time of steam boilers and the entire power plant due to monitoring
of thermal stresses in criterial boiler components,
applying inverse heat conduction methods including
measurements of heat flux and heat transfer coefficient,
numerical modeling of steam superheaters using CFD
simulations (Ansys Fluent, CFX) and own codes,
design, optimization and CFD analysis of heat
exchangers,
identification of actual working conditions for power
units (including temperature, heat flux, heat transfer
coefficient, thermal conductivity, thermal stresses, and pollutants emission measurements).
1
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Sunday, 22nd May 2016
14:20 – 19:00
Early Registration
Monday, 23rd May 2016
7:30 – 8:30
8:30 – 9:00
Registration
Opening remarks
Galaxy Hotel (Rooms A-F)
Keynote Session I (9:00 – 10:20)
Session Chairmen: Abdulmajeed Mohammad, Jan Taler
9:00 – 9:40
9:40 – 10:20
Maciej Chorowski
Chosen aspects of heat transfer in big helium cryogenic systems
Wen-Quan Tao and Ya-Ling He
Application of VOSET for Simulations of Boiling Heat Transfer
Sponsors Session I (10:20 – 10:50)
10:20 – 10:50
10:50 – 11:20
COMSOL Multiphysics
Presentation of COMSOL Multiphysics software
Coffee Break
Galaxy Hotel (Rooms A, B, C, D, E, F)
Room A: Parallel Session 1A (11:20 – 13:20)
Cooling and Convection Heat Transfer
Session Chairman: Ryszard Białecki
Viktor Terekhov, Ali Ekaid and Khalil Farhan Yassin
11:20 – 11:40
Laminar natural convection between two vertical parallel isothermal plates with
different aspect ratios
Tomasz Teleszewski and Sławomir Sorko
11:40 – 12:00
Simulation of forced convection a boundary element method for the laminar viscous
dissipation of flow through a straight regular polygonal duct with uniform heat flux
Xiao-Jie Huang and You-Rong Li
12:00 – 12:20
12:20 – 12:40
Large eddy simulation on Rayleigh-Bénard convection of cold water in the
neighborhood of maximum density value
T. Yamamoto, K. Yoshino and T. Kuwahara
Heat transfer characteristics in fine mist impinging jet using heated laminated wall
Sahin Yigit and Nilanjan Chakraborty
12:40 – 13:00
Numerical investigation of laminar Rayleigh-Bénard convection of Bingham fluids in
square cross-sectioned cylindrical enclosures
Hocine Mzad and Rabia Khelif
13:00 – 13:20
Effect of spraying pressure on spray cooling enhancement of beryllium copper alloy
plate
Room B: Parallel Session 1A (11:20 – 13:20)
Combustion
Session Chairman: Ali Cemal Benim
Felix Hellwig, Paul Alps, Horst Müeller and Reinhard Leithner
11:20 – 11:40
11:40 – 12:00
12:00 – 12:20
2
CFD-simulations of various measures reducing NOx-emissions of brown coal fired
power plants
Andrzej Bąkowski, Leszek Radziszewski and Milan Žmindak
Determining selected diesel engine combustion descriptors using the bootstrap method
Xin Yu, Kuibang Huang and Miao Zheng
Reactive Flow Modeling of Detonation Propagation in Expanding JB-9014
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Andrei Malinouski and Oscar Rabinovich
12:20 – 12:40
Modelling of inclined wave of filtration solid fuel combustion using CFD-DEM
technique
S. Iqbal, A. C. Benim, S. Fischer, F. Joos, D. Kluß and A. Wiedermann
12:40 – 13:00
13:00 – 13:20
Experimental and numerical investigation of natural- bio- and syngas flames in gas
turbine combustor model
Robert Zarzycki, Zbigniew Bis and Rafał Kobyłecki
The concept of coal burning in a cyclone furnace
Room C: Parallel Session 1A (11:20 – 13:20)
Engineering Application A
Session Chairman: Sang-Ho Suh
11:20 – 11:40
Sang Gyun Kim, Kye Bock Lee and Kyung-Yup Kim
Water hammer in the pump-rising pipeline system with an air chamber
Sang-Won Kim and Youn-Jea Kim
11:40 – 12:00
12:00 – 12:20
12:20 – 12:40
12:40 – 13:00
13:00 – 13:20
The effect of the inlet and outlet guide vane angles on the performance of axial-flow
pump
Paweł Ludowski
The CFD assisted design of the pole connector for high performance circuit breakers
Fang-Yi Qu, Chun-Sheng Guo, Yong Liu, Jing-Ran Niu and Xing-Hua Tong
Simulation of Steam Injection Process for Horizontal Well with Heavy Oil Recovery
A. Golara, Pe. Sh. Heidari and Po. Sh. Heidari
Modelling of propagation in high-pressure natural gas pipelines
Konrad Malik, Mateusz Zbikowski, Piotr Lesiak and Andrzej Teodorczyk
Numerical investigation of hydrogen-air detonation in a 9 m long tube
Room D: Parallel Session 1A (11:20 – 13:20)
Nanofluids and Nanotechnology
Session Chairman: M. Ziad Saghir
Jawali Channabasappa Umavathi and Maurizio Sasso
11:20 – 11:40
Heat transfer in a vertical rectangular duct filled with nanofluid for variable
properties
M. Ziad Saghir, Abdulmajeed Mohamad and Amirhossein Ahadi
11:40 – 12:00
12:00 – 12:20
The Role of Brownian and the Thermophoretic Effects in a Cavity Filled with
Nanofluids
Prem Gunnasegaran, Mohd Zulkifly Abdullah and Mohd Zamri Yusoff
Heat Transfer in a Loop Heat Pipe using Diamond-H2O Nanofluid
M. Corcione, S. Grignaffini, A. Quintino, E. Ricci and A. Vallati
12:20 – 12:40
12:40 – 13:00
Buoyancy-induced convection of alumina-water nanofluids in laterally-heated vertical
slender cavities
P. Rajesh Kanna, Jan Taler, Paweł Oclon, A. Arun Senthil Kumar, B. Varun
Kumar and K. Meenakshi Sundar
Numerical Investigation of Heat Transfer from a Channel flow with a Cavity filled with
nanofluids
Room E: Parallel Session 1A (11:20 – 13:20)
Engineering Application B
Session Chairman: Piotr Furmański
11:20 – 11:40
Sebastian Manzke, Ingo Riehl, Tobias Fieback and Ulrich Gross
Modeling the Thermit® rail welding process
Yu Zhang and Tie-Feng Tong
11:40 – 12:00
Thermal control scheme study of scientific experiment rack of new manned space
station
3
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Tytus Tulwin
12:00 – 12:20
12:20 – 12:40
A Coupled Numerical Heat Transfer in the Transient Multicycle CFD Aircraft Engine
Model
Yeon-Ho Jang, Dong Guk Ko and Ik–Tae Im
Numerical study on heat transfer in a CVD reactor with multiple wafers
Dong Li, Tongfei Ma, Changyu Liu, Hanbing Qia and Guozhong Wu
12:40 – 13:00
A model to determine thermal performance of a non-ventilated double glazing unit with
PCM and experimental validation
Room F: Parallel Session 1A (11:20 – 13:20)
Power Systems Modelling
Session Chairman: Janusz Badur
Tadeusz Chmielniak, Henryk Łukowicz Grzegorz Nowak and Andrzej Rusin
11:20 – 11:40
Analysis of thermal and stress states in transient operation of a turbine co-operating
with twinboiler
11:40 – 12:00
A. Vallati, M. Corcione, S. Grignaffini, A. Quintino, R. de Lieto Vollaro, M.
Romagna, L. Mauri
12:00 – 12:20
O. Mounkachi, M. Eddahbi, K. El Mallam, L. Fakhar, M. Hamedoun ,
H.Ezzahraoui, A. EL Kenz and A. Benyoussef
A new tri-generation system: thermodynamical analysis of a micro compressed air
energy storage (MICRO-CAES).
Magnetic refrigeration systems: numerical modeling, design and optimization
12:20 – 12:40
12:40 – 13:00
13:20 – 14:20
Michał Pawluczyk, Sebastian Gurgacz, Piotr Mazgaj, Piotr Darnowski and
Michał Gatkowski
Loss of coolant accident in pressurized water reactor prediction of a 6-inch cold leg
break with relap5 and cathare 2
Paweł Madejski, Lynda Porcheron, Pierre Plion and Sandro Dal Secco
CFD modeling of a frontal fired pulverized coal boiler
Lunch
Galaxy Hotel (Rooms A, B, C, D, E)
Room A: Parallel Session 1B (14:20 – 16:20)
Modelling and numerical techniques
Session Chairman: Wen-Quan Tao
14:20 – 14:40
14:40 – 15:00
15:00 – 15:20
15:20 – 15:40
Piotr Darnowski, Kacper Potapczyk, Michał Gatkowski and Grzegorz
Niewiński
Development of one-way-coupling methodology between severe accident integral code
MELCOR and Monte Carlo neutron transport code SERPENT
Manohar Karnal and Beenish Batul
Estimation of exhaust gas temperature of the rocket nozzle using hybrid approach
Rafał Wyczółkowski
Computational model of the complex heat flow in the area of steel rectangular section
Roslinda Nazar and Ezad Hafidz Hafidzuddin, Norihan M. Arifin and Ioan
Pop
Unsteady flow and heat transfer over a permeable stretching/shrinking sheet with
generalized slip velocity
Sławomir Dykas, Artur Szymański and Mirosław Majkut
15:40 – 16:00
Liquid phase evaporation on the normal shock wave in moist air transonic flows in
nozzles
Feng-Xian Sun, Chang-Yu Liu and Xin-Lin Xia
16:00 – 16:20
4
A transient model for water evaporation under solar radiation and experimental
validation
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Room B: Parallel Session 1B (14:20 – 16:20)
Lattice Boltzmann Method and Molecular Dynamics
Session Chairman: Abdulmajeed Mohamad
Qing Liu and Ya-Ling He
14:20 – 14:40
Numerical modelling of microchannel flows in the transition flow regime using the
cascaded Lattice Boltzmann method
José Rabi and Eliana Kamimura
14:40 – 15:00
15:00 – 15:20
15:20 – 15:40
Lattice-Boltzmann simulation of lipase separation via bioaffinity chromatography:
imposition of either Dirichlet or Danckwerts condition at column inlet
Dmytro Svyetlichnyy, Michał Krzyzanowski, Robert Straka, Łukasz Łach and
W. Mark Rainforth
Application of Cellular Automata and Lattice Boltzmann methods for modelling of
Additive Layer Manufacturing
Yun Gao, Guido Raos, Carlo Cavallotti and Minoru Takahashi
Molecular dynamics simulation of liquid lead-bismuth eutectic (LBE)
Md. Farhad Hasan, Taasnim Ahmed Himika and Md. Mamun Molla
15:40 – 16:00
Lattice Boltzmann Method with Large-Eddy Simulation of Airflow and Mixed
Convection in a General Ward of Hospital
Room C: Parallel Session 1B (14:20 – 16:20)
New numerical approaches
Session Chairman: Xia Cui
14:20 – 14:40
Róbert Kovács and Péter Ván
A new numerical method to solve ballistic-conductive heat equation
Zhijun Shen and Wei Yan
14:40 – 15:00
15:00 – 15:20
A new Riemann solver for radiation hydrodynamics in the non equilibrium diffusion
limit
Xia Cui, Guangwei Yuan and Zhijun Shen
An efficient solving method for nonlinear convection diffusion equation
Salman Arshad, Bo Kong, Alan Kerstein and Michael Oevermann
15:20 – 15:40
A strategy for large-scale scalar advection in large eddy simulations that use the
linear eddy sub-grid mixing model
Room D: Parallel Session 1B (14:20 – 16:20)
Modelling and simulation
Session Chairman: Wiesław Zima
14:20 – 14:40
Mustafa Atmaca, Ahmet Berk Kurtulus, Mehmet Akif Aydin, İbrahim Girgin
and Cüneyt Ezgi
A CFD and experimental study on open jet flows
Lixin,Yang, Mengjun Zhou and Zihao Tian
14:40 – 15:00
15:00 – 15:20
15:20 – 15:40
15:40 – 16:00
16:00 – 16:20
Numerical simulation of the effect of three typical mixing vanes on flow and heat
transfer characteristics in 5×5 rod bundles
Goangsik Ryu, Min-Woo Kang, Nohyun Park, Suh Sang-Ho
Effects of runner blade shape changes on Francis turbine performance
Jae-Sik Hur, Hyoung-Ho Kim, Sang-Ho Suh, Seung-Hak Baek
FSI analysis for the relationship between OSA occurrence and MARPE treatment
Rıdvan Yakut, Kenan Yakut, Faruk Yeşildal and Altuğ Karabey
Experimental and numerical investigations of impingement air jet for a heat sink
Tomasz Krupicz and Sarina Grevsmühl
Converting an enhanced heat transfer model to a flexible simulation app
5
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Room E: Parallel Session 1B (14:20 – 16:20)
Engineering Application C
Session Chairman: Wojciech Nowak
Miao Zheng and Xin Yu
14:20 – 14:40
14:40 – 15:00
Application of Quantification of Uncertainties Method in Detonation Simulation to
STEVEN Test
Aline Jünger, Ingo Riehl, Tobias Fieback and Ulrich Gross
A reduced model for the calculation of radiation-tube burners
Qingliang Meng, Tao Yang and Chunlin Li
15:00 – 15:20
Numerical simulation and analyses of temperature control loop heat pipe for space
CCD camera
Piotr Furmański, Piotr Łapka and Tomasz Wiśniewski
15:20 – 15:40
15:40 – 16:00
Evaluation of skin surface temperature for the protective clothing-skin system.
Comparison of analytical and numerical modelling
Kamil Śmierciew, Mirosława Kołodziejczyk, Jerzy Gagan and Dariusz
Butrymowicz
Numerical modelling of fin heat exchanger in application to cold storage
16:00 – 16:20
Lixin Yang and Jingnan Peng
The mathematical model research on MIG V groove welding process
16:20 – 17:00
Coffee Break
17:00 – 20:00
Cracow Guided Tour
6
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Tuesday, 24th May 2016
7:30 – 9:00
Registration
Galaxy Hotel (Room A-F)
Keynote Session II (9:00 – 10:20)
Session Chairmen: Ulrich Gross, Ali Cemal Benim
9:00 – 9:40
9:40 – 10:20
Rachid Bennacer
Some questions on the appropriate scale in Building integrating Hybrid solar collector
Sang-Ho Suh
Recent studies for obstructive sleep apnea and hydronephrosis
Sponsors Session II (10:20 – 10:50)
10:20 – 10:50
10:50 – 11:20
STEAG Energy Services Gmbh
Presentation of Ebsilon software
Coffee Break
Galaxy Hotel (Rooms A, B, C, D, E)
Room A: Parallel Session 2A (11:20 – 13:20)
Inverse Problems
Session Chairman: Jan Taler
Kazimierz Rup, Łukasz Malinowski and Piotr Sarna
11:20 – 11:40
11:40 – 12:00
12:00 – 12:20
12:20 – 12:40
Indirect measurement of the Flow Rate Based upon a Solution of an Inverse Coefficient
Problem
Piotr Duda
Solution of inverse heat conduction problem using the Tikhonov regularisation method
Jaroslaw Krzywanski, Marta Wesolowska, Artur Blaszczuk, Anna Majchrzak,
Maciej Komorowski and Wojciech Nowak
Fuzzy logic to predict heat transfer coefficient for membrane-walls in a large-scale
CFB boiler
Wojciech Adamczyk, Ryszard Białecki and Tadeusz Kruczek
Nondestructive measurement of anisotropic heat conductivity tensor
Bartosz Ziegler
12:40 – 13:00
Inverse design of transonic compressor cascades with boundary layer control using
adjoint approach
Krzysztof Grysa, Artur Maciąg and Justyna Adamczyk-Krasa
13:00 – 13:20
Trefftz collocation method in solving the direct and inverse problems in a skin with
perfusion using Pennes’ and single-phase lag models
Room B: Parallel Session 2A (11:20 – 13:20)
Optimization
Session Chairman: Ravipudi Venkata Rao
Xian-long Meng, Xin-lin Xia, Chuang Sun and Xiao-Lei Li
11:20 – 11:40
Optical transmission characteristics of concentrated solar rays in the VSR using cupshaped porous absorber
Abdallah Haouam, Maxence Bigerelle and Bachir Merzoug
11:40 – 12:00
12:00 – 12:20
12:20 – 12:40
Simplex enhanced numerical modeling of the temperature distribution in a hydrogen
cooled steel coil annealing process
Tomasz Krupicz and Sarina Grevsmühl
Multiphysics Modelling and Optimization of a Porous Reactor
Rao Ravipudi, Kiran More, Pawel Ocłoń and Jan Taler
Design optimization of a micro-channel heat sink using JAYA algorithm
7
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Tim Gronarz, Martin Habermehl and Reinhold Kneer
12:40 – 13:00
13:00 – 13:20
Modeling of particle radiation interaction in solid fuel combustion with artificial
neural networks
Gaetano Continillo, Simone Lombardi, Katarzyna Bizon and Francesco
Saverio Marra
Modelling and optimization of heat transfer for a Stirling engine immersed in a
fluidized bed combustor
Room C: Parallel Session 2A (11:20 – 13:20)
Nanofluids
Session Chairman: M. Uthayakumar
M. Mohib Ur Rehman, Zhiguo Qu and Rui-Peng Fu
11:20 – 11:40
11:40 – 12:00
Three dimensional numerical study of laminar confined slot jet impingement cooling
using slurry of nano-encapsulated phase change material
Saleh Etaig, Reaz Hasan and Noel Perera
Investigation of a New Effective Viscosity Model for Nanofluids
Mikhail Sheremet, Anuar Ishak and Ioan Pop
12:00 – 12:20
Effect of local heat source on natural convection in a wavy cavity filled with a
nanofluid using Buongiorno’s model
Paweł Ziółkowski and Janusz Badur
12:20 – 12:40
12:40 – 13:00
A theoretical, numerical and experimental verification of the Reynolds thermal
transpiration laws
Amine Heroual and Mahfoud Kadja
Numerical study of an axisymmetric jet heat transfer with nanofluids
Room D: Parallel Session 2A (11:20 – 13:20)
Two-Phase and Multiphase flows
Session Chairman: Zongchang Zhao
Zongchang Zhao, Weiwei Fan and Weishuo Li
11:20 – 11:40
Numerical simulation on falling film flow of new working fluid [emim][dep]/h2o
outside the vertical tube with VOF models
Van Huyen Vu, Benoît Trouette, Quy-Dong To and Eric Chénier
11:40 – 12:00
12:00 – 12:20
12:20 – 12:40
12:40 – 13:00
Multi-scale modelling and hybrid atomistic continuum simulation for condensation of
gas in a microchannel
Hochan Hwang and Gihun Son
Numerical study of evaporation-induced particle line formation on a moving substrate
Tadeusz Orzechowski, and Sylwia Wciślik
Evaporation of the leidenfrost droplet located on a thin metal foil
Ahmed Ramadan, Reaz Hasan and Roger Penlington
Modelling heat transfer from water surface undergoing free evaporation
Room E: Parallel Session 2A (11:20 – 13:20)
Convection and Cooling
Session Chairman: Andrea Vallati
Fadzilah Md Ali, Kohi Naganthran, Roslinda Nazar and Ioan Pop
11:20 – 11:40
11:40 – 12:00
12:00 – 12:20
8
MHD mixed convection boundary layer stagnation-point flow on a vertical surface
with induced magnetic field: a stability analysis
Abdelouhab Labihi, Hassan Chehouani, Brahim Benhamou, Faiçal Aitlahbib
and Jaouad Arrougui
Numerical and experimental study of natural convective heat transfer inside a square
enclosure with one vertical wall incorporating phase change material.
Robert Smusz
Numerical analysis of thermal stratified storage tank
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
12:20 – 12:40
12:40 – 13:00
13:00 – 13:20
13:20 – 14:20
Krzysztof Grunt, Agnieszka Żuraw and Sławomir Pietrowicz
Analysis of Nusselt number distribution in case of a strongly heated, horizontal rod
Xiaoming Tan, Jinghzou Zhang, Xingdan Zhu and Yong Shan
Film cooling from a row of discrete holes embedded in a transverse surface trench
Hyunjong Kim, Yoon-Hwan Choi and Yeon-Won Lee
Numerical study on sloshing loads in a prismatic tank by VOF method
Lunch
Galaxy Hotel (Rooms A, B, D)
Room A: Parallel Session 2B (14:20 – 16:20)
Enhanced Heat Transfer
Session Chairman: Dawid Taler
Umair Mohammed Siddique and Gulhane Nitin Parashram
14:20 – 14:40
On numerical investigation of heat transfer augmentation through pin fin heat sink by
laterally impinging air jet.
Artur Blaszczuk and Wojciech Nowak
14:40 – 15:00
The impact of bed temperature on heat transfer characteristic between fluidized bed
and vertical rifled tubes
Suvanjan Bhattacharyya, Himadri Chattopadhyay and Ali Cemal Benim
15:00 – 15:20
Heat transfer enhancement of laminar flow of ethylene glycol through a square
channel fitted with angular cut wavy strip
Bo Ruan, Xiaowei Gao, Keke Xu and Hua Meng
15:20 – 15:40
15:40 – 16:00
Numerical study on turbulent heat transfer of CuO-methane nanofluid at supercritical
pressures
Hongbo Xu, Shuangquan Shao, Mingsheng Tang, Huiming Zou, Changqing
Tian and Chunqiang Si
Numerical analysis on the performance of a closed refrigerant spray cooling system
Piotr Krawczyk
16:00 – 16:20
Numerical modeling of simultaneous heat and moisture transfer during sewage sludge
drying in solar dryer
Room B: Parallel Session 2B (14:20 – 16:20)
Two-phase and multiphase flows
Session Chairman: Wiesław Zima
14:20 – 14:40
Raghavendra Rohith Kasibhatla, Andreas König-Haagen and Dieter
Brüggemann
Numerical modeling of wetting phenomena during melting of PCM
Sebastian Kornet and Janusz Badur
14:40 – 15:00
Numerical analysis of the oscillation frequency of the shock wave appearing on the
condensing steam flow in the symmetrical imp pan nozzle
Tianyu Li, Zongchang Zhao and Xiaodong Zhang
15:00 – 15:20
A molecular dynamics investigation on thermo-physical properties and hydrogen-bond
of 1-ethyl-3-methyl-imidazolium dimethyl phosphate-water working fluids
Chang Li, Zongchang Zhao and Xiaodong Zhang
15:20 – 15:40
15:40 – 16:00
Molecular dynamics simulation on transfer properties of ionic liquid [EMIM][DEP]
and its aqueous solution
Mark Ho, Guan Yeoha, John Reizes and Victoria Timchenko
The Intersection Marker (ISM) method for the simulation of bubbly flows
Yusuke Asakuma, Ryosuke Nakata, Shungo Matsumura and Agus Saptoro
16:00 – 16:20
Mechanism of microwave heating through molecular orbital method and bubble size
profiles
9
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Room D: Parallel Session 2B (14:20 – 16:20)
Applications
Session Chairman: Li-Zhi Zhang
14:20 – 14:40
Piotr Łapka, Mirosław Seredyński and Piotr Furmański
Numerical analysis of the exhaust jet in the small aircrafts
Hao Jia, Dong Li and Bin Chen
14:40 – 15:00
15:00 – 15:20
15:20 – 15:40
15:40 – 16:00
16:20 – 17:00
Numerical Investigation on Photo-disruption of Dermal Blood Vessels with Multiple
Pulses in Laser Skin Surgery
Jakub Kalke, Mateusz Szczeciński and Paweł Mazuro
Unsteady conjugated heat transfer in cylinder of highly loaded opposed-piston engine
Mahfoud Kadja and Ridha Mebrouk
Computation of heat transfer and fluid flow in a fin-and-tube heat exchanger
Kumaresan Govindaraj, Santosh Ravi, Duraisamy Ponnukutti, Venkatesan
Ramar and Satheesh Kumar Nathamani
CFD analysis of effects of baffle cut on shell side heat exchanger performance with
inclined baffle
Coffee Break
Galaxy Hotel (Rooms A, B, E, F)
Poster session I (17:00 – 19:00)
Session Chairman: Rajesh Kanna
Beata Niezgoda-Żelasko
1
The enthalpy-porosity method applied to the modelling of the ice slurry melting process during
tube flow
2
Khelifa Noureddine, Kamel Bey, Abdennacer Chemami and Hocine Mzad
3
Piotr Cyklis and Przemysław Młynarczyk
Fatigue behavior and damage of composite laminates (3-point bending)
The CFD based estimation of pressure pulsation damping parameters for the manifold element
Timo Bohnenstädt, Matthias Rathjens and Georg Fieg
4
Tracking and Evaluation of the Effect of Process Modifications on site-wide Heat Integration
Measures
5
Piotr Cyklis and Przemysław Młynarczyk
6
Guangxi Zhao, Zhengying Wie, Jun Du, Wie Liu, Xin Wang and Yunfei Yao
The influence of the CFD method on the nozzle impulse flow simulation results
Additive manufacturing of Sn63Pb37 component by micro-coating
Guilherme de Mattos Heusy, Pablo Martins Belchor, Vanessa Ferreira, João Bottin,
Gabriel Benetti and Evandro Mathias
7
Use of computational fluid dynamic to compare the pressure loss between a parallel flow field
plate with a parallel-baffle flow field plate and a fractal parallel-baffle flow field plate in a proton
exchange membrane fuel cell
Piotr Olczak and Małgorzata Olek
8
9
The influence of evacuated-tube collector assembly on heat loss in tracking solar system with
parabolic mirror reflectors
Maria Liakh and Oscar Rabinovich
Heat and mass transfer in adsorption-chemical cooling with phase transitions in a sorbent
Leszek Kulesza and Paweł Solak
10
The calculation of the amount of energy needed to keep the solar collector absorber surface
above the freezing point of water in the Polish climate all year round
Khelif Rabia and Mzad Hocine
11
10
Reliability based inspection periods (RBIP) of a structure subjected to fatigue and temperature
phenomena
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
12
Jarosław Bartoszewicz, Adam Nygard and Rafał Urbaniak
Characteristics of fans used in the low-power boilers
Ryszard Kantor
13
14
Modelling of a coupled radiation-conduction heat transfer through a heat shield in vacuum
thermal isolation applications
Jan Wrona and Marek Prymon
Mathematical modeling of the Stirling cycle
Damian Szubartowski and Artur Ganczarski
15
On plane stress state and stress free deformation of thick plate with FGM interface under thermal
loading
16
Monika Kosowska-Golachowska
17
Md Rakibuzzaman, Kyung Wuk Kim and Sang-Ho Suh
18
Józef Rak, Sławomir Pietrowicz and Zbigniew Gnutek
Thermal analysis and kinetics of coal during oxy-fuel combustion
Numerical analysis of cavitation with variable speed changes in centrifugal pump
Thermal – Flow Calculations of 3-D Scroll Compressor Working Chambers
Piotr Łapka, Piotr Furmański and Tomasz Wiśniewski
19
Numerical assessment of influence of different heat transfer modes on temperature distribution in
the protective clothing and skin
Wiesław Zima and Marzena Nowak-Ocłoń
20
A new 1D/2D model of coupled heat transfer in waterwall tubes of supercritical steam boilers
combustion chambers
21
Dawid Taler and Karol Kaczmarski
22
Mirosława Kołodziejczyk, Kamil Śmierciew, Jerzy Gagan and Dariusz Butrymowicz
23
Andrzej Frąckowiak and Michał Ciałkowski
24
Michał Ciałkowski, Andrzej Frąckowiak, Uwe Gampe and Łukasz Semkło
25
Robert Zarzycki and Zbigniew Bis
26
Ali Can İspir, Eren Dikeç and Seyhan Onbaşıoğlu
Mathematical modelling of the transient response of pipeline
Numerical modelling of heat and mass transfer in vegetables cold storage
Application of discrete Fourier transform to inverse heat conduction problem regularization
Solution of inverse problem – regularization via entropy
Modelling of the process of coal dust combustion in a cyclone furnace
Solution of leakage problem in a guarded hot plate device
Beata Maciejewska, Kinga Strąk and Magdalena Piasecka
27
28
The solution of the two-dimensional inverse heat transfer problem with the use of two methods:
the Trefftz method and the Beck method
Shi Chen, Lei Qiao, Xiao-Hua Liu, Sheng-Qiang Shen and Xiao-Xiao Wang
The experimental verification for static spreading semi-ellipsoidal droplet on solid surface
29
Kyungwuk Kim, Md Rakibuzzaman and Suh Sang-Ho
30
Robert Zarzycki and Zbigniew Bis
Estimation of energy saving rates for multistage inverter driving variable speed pump
Modelling of coal dust gasification in a cyclone furnace under oxy-fuel combustion conditions
Kyungwuk Kim, Md Rakibuzzaman and Suh Sang-Ho
31
The acceleration life test for reliability evaluation of energy saving rates of a variable speed
centrifugal pump
11
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Wednesday, 25th May 2016
7:30 – 9:00
Registration
Galaxy Hotel (Room A-F)
Keynote Session I (9:00 – 10:20)
Session Chairmen: Janusz Badur, Ryszard Białecki
Li-Zhi Zhang
9:00 – 9:40
9:40 – 10:20
A Lattice-Boltzmann Simulation of mass transport through porous membranes
considering gas-to-matrix interactions
Ravipudi Venkata Rao
Role of advanced optimization algorithms in the design of heat exchangers
10:20 – 10:50
Conference photograph
10:50 – 11:20
Coffee Break
Galaxy Hotel (Rooms B, C, D)
Room B: Parallel Session 3A (11:20 – 13:20)
Heat Exchangers
Session Chairman: Ulrich Gross
Gwang Hoon Rhee and Gun Woo Kim
11:20 – 11:40
The effect of corrugation angle on a heat transfer performance of offset flow control
applied wavy fin heat exchanger
Chao Bai, Guanming Zhang and Maocheng Tian
11:40 – 12:00
12:00 – 12:20
A new method for heat transfer and fluid flow simulation inside large plate heat
exchangers
Turo Välikangas and Reijo Karvinen
Conjugated heat transfer simulation of a fin-and-tube heat exchanger
En Tian, Yaling He and Wenquan Tao
12:20 – 12:40
12:40 – 13:00
Thermo-Hydraulic Performance Evaluation, Field Synergy and Entransy Dissipation
Analysis for Hexagon-Like and Circular-Like Pin Finned Tube Bundles
Steven Mac Nelly, Willi Nieratschker, Marc Nadler, Kevin Einsle, Daniel Raab
and Antonio Delgado
Calibration of the Reynolds stress model for the simulation of gas flows in corrugated
tubes
Room C: Parallel Session 3A (11:20 – 13:20)
Turbulent Flows
Session Chairman: Ali Cemal Benim
Atilla Altintas and Ibrahim Ozkol
11:20 – 11:40
11:40 – 12:00
12:00 – 12:20
12:20 – 12:40
12:40 – 13:00
12
Spanwise Oscillated Lorentz Force Effect on Dissipation and Entropy Generation in
wall-bounded turbulent flows
Lixin,Yang; Zihao,Tian and Mengjun, Zhou;
A Comparison of Particle Image Velocimetry and Computational Fluid Dynamics
Simulations of Lateral Flow Fields with Spacer Grids
Antti Mikkonen and Reijo Karvinen
Heat Transfer Of Impinging Jet: Effect of Compressibility and Turbulent Kinetic
Energy Production
Yong Shan, Xiaoming Tan, Jingzhou Zhang and Minmin Wang
Numerical Study on Flow and Cooling Characteristics for Supersonic Film Cooling
Dawid Taler and Jan Taler
Heat transfer correlations for turbulent flow of liquid metals in tubes
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
13:00 – 13:20
Hamid Oualli, Mekadem Mahmoud, Bouabdallah Ahcene and Gad-El-Hak
Mohamed
Enhanced turbulence in the Taylor-Couette flow system
Room D: Parallel Session 3A (11:20 – 13:20)
Porous Media
Session Chairman: Abdulmajeed Mohamad
Prashant G Metri, Subhas Abel and Sergei Silvestrov
11:20 – 11:40
11:40 – 12:00
Heat transfer in MHD mixed convection visco-elastic fluid flow over a stretching sheet
embedded in a porous medium with viscous dissipation and non- uniform heat source
Philip Farayola
On steady flow of a reactive variable viscous flow in a porous cylindrical pipe
Wei Lu and Tao Zhang
12:00 – 12:20
The Theoretical Analysis of Heat Transfer and Flow through Plate Heat Exchangers
Partially Filled with Metal Foams
Chen Yuan-Yuan, Benwen Li and Wanping Tan
12:20 – 12:40
12:40 – 13:00
13:00 – 13:20
13:20 – 14:20
Effect of radiative properties on natural convection in a square porous cavity under
local thermal non-equilibrium condition
Ya Ting Tan
Numerical simulation calculation of the hollow fiber membrane distillation
Jinqiao Wu, Jing Ding and Jianfeng Lu
Nitrate transport characteristics in the soil and groundwater
Lunch
Hotel Galaxy (Rooms A, D)
Room A: Parallel Session 3B (14:20 – 16:20)
Modelling and Simulation
Session Chairman: Rachid Bennacer
14:20 – 14:40
Sahadev Pradhan and V. Kumaran
Transition and turbulence in a wall-bounded channel flow at high Mach number
Ahmed Neche and Youbi, Zineddine
14:40 – 15:00
15:00 –15:20
Algebraic model closure of counter gradient scalar turbulent transport in modeling
turbulent premixed flames stabilized in a stagnating turbulent flow
Peng Wei, Henri Spanjers, Wim Uijttewaal, Jules van Lier and Merle de Kreuk
Hydrodynamic characterisation of gas mixing in anaerobic digesters
Mirosław Seredyński and Jerzy Banaszek
15:20 – 15:40
15:40 – 16:00
Front tracking based binary alloy solidification model on unstructured control volume
grid
Dimitry Ivanov and Andrei Chorny
Numerical modeling of the transitional boundary layer over a flat plate
Room D: Parallel Session 3B (14:20 – 16:20)
Applications
Session Chairman: Reinhard Leithner
14:20 – 14:40
Dennis Braun
Optimizing the Operation of Power Plants – Project Experiences
Qinyuan Yuan, Tao Yu, Jing Ding, Jianfeng Lu and Weilong Wang
14:40 – 15:00
Heat transfer and energy storage performances of methane reforming with carbon
dioxide in semi-cavity reactor
Kamil Banaś and Janusz Badur
15:00 –15:20
Influence of turbulence RANS models on heat flux and heat transfer coefficients during
thermal FSI analysis of power turbine guide vane of helicopter turbine engine PZL
10W
13
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Tomasz Bury and Małgorzata Hanuszkiewicz-Drapała
15:20 – 15:40
15:40 – 16:00
16:20 – 17:00
Finite difference and CFD approach for modelling of media flow maldistribution in
tube and fin crossflow heat exchangers
Mohsen Khorasanimohamadrezai, Abbas Zeynaddinimeymand and Nasrin
Aminizadeh
The impact of a ceramic wear liner on the separation efficiency of a particular cyclone
dust collector
Coffee Break
Hotel Galaxy (Rooms A, B, E, F)
Poster session II (17:00 – 19:00)
Session Chairman: Hocine Mzad
1
2
3
4
5
Matthias Rathjens, Timo Bohnenstädt, Georg Fieg and Ole Engel
Synthesis of heat exchanger networks taking into account cost and dynamic considerations
Daniel Lewandowski, Piotr Lipnicki, Diego Pareschi and Michał Kaczmarek
Real Time Model Predictive Control for Centrifugal Compressors
Magdalena Jaremkiewicz and Jan Taler
Measurement of transient fluid temperature in a pipeline
Karol Majewski and Sławomir Grądziel
Experimental measurements and CFD modelling of the pressure drop in internally helically
ribbed tubes
Sławomir Grądziel and Karol Majewski
Modelling of flow and heat phenomena in plain and internally ribbed tubes
Min-Woo Kang, Nohyun Park and Suh Sang-Ho
6
A study on performance characteristics of model Francis turbine for large-scale hydro power
plant
7
Artur Cebula
8
Artur Cebula
9
Piotr Dzierwa, Dawid Taler, Marcin Trojan and Jan Taler
Experimental studies of the thermal flowmeter and its analytical and numerical analysis
A device for measuring the heat flux on the cylinder outer surface in a cross-flow
Optimum heating of boiler evaporator
Bo Shi and Qibin Zhu
10
11
12
The Effect of discrete number of velocity directions on thermal conductivity prediction of
superlattices
Robert Kłosowiak, Jarosław Bartoszewicz and Rafał Urbaniak
The numerical analysis of unsteady flow in the reversing axisymmetric jet
Dawid Taler and Anna Korzeń
Numerical modeling of transient operation of a plate fin and tube heat exchanger at transition
fluid flow in tubes
Wojciech Jerzak and Monika Kuźnia
13
14
Experimental studies and the chemical kinetics modelling of oxidation of hydrogen sulfide
contained in biogas
Remigiusz Nowak
Estimation of viscous and inertial resistance coefficients for a various heat sink configurations
Beata Maciejewska and Magdalena Piasecka
15
Determination of the boiling heat transfer coefficient on the basis time-dependent temperature
measurements
16
Sahadev Pradhan and V. Kumaran
17
Young-Jong Chung, Soo Hyung Yang, Kyoo Hwan Bae and Jae Seung Song
14
The Generalized Onsager Model for a Binary Gas Mixture with Swirling Feed
CLOF scenario validation of TASS/SMR code using VISTA-ITL test results
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
18
19
Marek Jaszczur, Inga Polepszyc, Aneta Sapińska-Śliwa and Andrzej Gonet
An analysis of the numerical model influence on the ground temperature profile determination
Damian Muniak
Sizing the radiator control valve taking account of inner authority
Piotr Dzierwa, Marcin Trojan, Dawid Taler, Katarzyna Kamińska, Jan Taler
20
21
22
23
Optimum heating of thick-walled pressure components assuming a quasi-steady state of
temperature distribution
Viktor Terekhov, Hayder Khafaji and Maxim Gorbachev
Numerical study of a M-cycle counter-flow heat exchanger for indirect evaporative
cooling
Paweł Ocłoń and Stanisław Łopata
Study of the effect of heat exchanger fouling on its thermal performance
Przemysław Pastuszak
Characterization of defects in curved composite structures using active infrared thermography
Piotr Wais
24
25
Correlation and numerical study of heat transfer for single row cross-flow heat exchangers with
different fin thickness
Adam Ruszaj
Some aspects of bioinspirations in energy production and consumptions
Paweł Ocłoń, Stanisław Łopata, Kamil Chłosta
26
Experimental and numerical investigation of flow distribution within the heat exchanger with
elliptical tubes
15
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Notes
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
16
IXth International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)
23-26 May 2016, Kraków, Poland
Notes
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
17
a
ICCHMT 2016 − OUTLINE
Sunday
22nd May
Monday
23rd May
Registration
Tuesday
24th May
Wednesday
25th May
Thursday
26th May
8:30 – 9:00
Opening
remarks
Registration
Registration
Zakopane Guided
Tour *)
9:00 – 10:20
Keynote
Session I
Keynote
Session II
Keynote
Session III
10:20 – 10:50
Sponsor
Session I
Sponsor
Session II
Conference
Photograph
7:30 – 8:30
10:50 – 11:20
Coffee break
Parallel
Sessions 1A
11:20 – 13:20
13:20 – 14:20
Parallel
Sessions 2A
Parallel
Sessions 3A
Lunch
Parallel
Sessions 1B
14:20 – 16:20
16:20 – 17:00
Parallel
Sessions 2B
Parallel
Sessions 3B
Coffee break
Early
registration
17:00 – 19:00
Meeting of
the Scientific
Committee for
papers
selection
Cracow
Guided Tour
Poster
Session I
Zakopane Guided
Tour *)
Poster
Session II
19:00 – 19:30
19:30 – 20:00
20:00 – 22:00
22:00 – 22:30
*)
Gala Dinner
Conference
Closure
Zakopane Guided Tour is organized by the ICCHMT16 Partner - Cracow Spirit.
The cost of Zakopane Guided Tour is 60 Euro. The Tour is starting on Thursday at 8 am.
Cracow Spirit provides several other trips: Wieliczka Salt Mine and Auschwitz - Birkenau Memorial and Museum.
Cracow Spirit is also offering transportation from the Balice Airport to the hotel.
All the relevant information about the programme and payment can be found at the following link:
http://icchmt.conrego.pl/tours-transfers