T E C H N I C A L D ATA
Clarity™ Transparency Cleaning System
Description
Basic Usage
Clarity™ Transparency Cleaning System is a two-part
cleaning method that can easily remove debris from coated
and uncoated plastic transparencies with an emphasis on
removing insect residue. The proprietary blend also affords
additional protection to the substrate and facilitates future
cleanings, thereby potentially increasing the transparency’s
useful life and reducing maintenance time.
•
2 wet cloths, 1 dry cloth
•
Packaged intended to clean approximately 15 ft2 of
area
•
Dispose of wipe upon visible debris according to
federal, state, and local ordinances
•
Intended for aircraft transparencies use
The cleaning process first utilizes wet wipes that are
formulated to remove the superficial debris. The secondary
dry wipe is used to remove any haze that remains on the
substrate. The package conveniently comes with both
wipes sealed in individual compartments. Wipes are
disposable and not resealable. Recommended one-time
use only.
The cloths have been carefully selected to give good
durability to the single use application without damaging
the coating. The packaging typically contains 2 wet
wipes and 1 dry wipe which can cover approximately 15
ft2. Normal use is expected to utilize one wipe. Where
extensive debris is present, additional wipes may be
necessary.
Part Number: 599306
Performance Features
•
Consistency in cleaning method and materials
•
Easy use and application
•
Improved transparency lifespan
•
Facilitates future cleaning methods
•
Low lint application
•
Non-abrasive
•
Preselected wiping cloths
•
Reduced time for periodic cleanings
•
Vapor barrier resistant packaging
Directions for Use
1. Use finger pressure (no palm pressure)
2. Wipe in direction of airflow
3. Wipe with wet cloth and immediately follow with
dry wipe
4. If surface dries prior to dry wipe and residue
remains, re-wet the surface with wet wipe and
immediately follow with dry wipe
Storage
Clarity™ Transparency Cleaning System packages
should be stored away from sunlight at room
temperature up to 6 months from date of manufacture.
Please contact PPG Aerospace customer service for
advice, comments, or concerns.
Health Precautions
This product is safe to use and apply when recommended precautions are followed. Before using this product,
read and understand the Material Safety Data Sheet
(MSDS), which provides information on health, physical
and environmental hazards, handling precautions and
first aid recommendations. An MSDS is available on
request. Avoid overexposure. Obtain medical care in
case of extreme overexposure.
For industrial use only. Keep away from children.
Additional information can be found at:
www.ppgaerospace.com
For sales and ordering information call
1-800-AEROMIX (237-6649).
Where Smart Solutions Take Flight®
Clarity™ Transparency Cleaning System
Clarity is a trademark of PPG Industries Ohio, Inc. registered with the U.S. Patent Office.
All recommendations, statements, and technical data contained herein are based on tests we believe to be reliable
and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. User shall rely on his own information and tests to determine suitability of the
product for the intended use and assumes all risks and liability resulting from his use of the product. Seller’s and
manufacturer’s sole responsibility shall be to replace that portion of the product of this manufacturer which proves
to be defective. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury,
loss, or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or
statements other than those contained in a written agreement signed by an officer of the manufacturer shall not
be binding upon the manufacturer or seller.
Printed in the U.S.A.
PPG Industries, Inc.
1719 Highway 72 East
Huntsville, Alabama 35811 USA
Telephone +1 (256) 851-7001
Fax +1 (256) 851-8822
SITA HSVXPCR
Sierracin/Sylmar Corp.
12780 San Fernando Road
Sylmar, California 91342 USA
Telephone +1 (818) 362-6711
Fax +1 (818) 362-7801
Issue Date: 12/12
Supersedes: 10/12
© Copyright PPG Industries 2012