Standard reference
CWA 16874:2015
EN 50121-1:2015
EN 50121-2:2015
EN 50121-3-1:2015
EN 50121-3-2:2015
EN 50121-4:2015
EN 50121-5:2015
EN 50250:2002/A1:2015
Title
Verification of performance levels of EGNOS Enabled mass-market
receivers
Railway applications - Electromagnetic compatibility - Part 1: General
Railway applications - Electromagnetic compatibility - Part 2: Emission of
the whole railway system to the outside world
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock
- Train and complete vehicle
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock
- Apparatus
Railway applications - Electromagnetic compatibility - Part 4: Emission and
immunity of the signalling and telecommunications apparatus
Railway applications - Electromagnetic compatibility - Part 5: Emission and
immunity of fixed power supply installations and apparatus
Conversion adaptors for industrial use
Alcohol interlocks - Test methods and performance requirements - Part 2:
EN 50436-2:2014/A1:2015
Instruments having a mouthpiece and measuring breath alcohol for general
preventive use
EN 50436-6:2015
Alcohol interlocks - Test methods and performance requirements - Part 6:
Data security
Measurement procedures of magnetic field levels generated by electronic
EN 50500:2008/A1:2015
and electrical apparatus in the railway environment with respect to human
exposure
Ecodesign for power drive systems, motor starters, power electronics and
EN 50598-3:2015
their driven applications - Part 3: Quantitative eco design approach through
life cycle assessment including product category rules and the content of
environmental declarations
EN 50600-2-4:2015
Information technology - Data centre facilities and infrastructures - Part 2-4:
Telecommunications cabling infrastructure
Household and similar electrical appliances - Safety - Particular
EN 50615:2015
requirements for devices for fire prevention and suppression for electric
hobs (cooktops)
EN 60079-10-2:2015
EN 60335-2-4:2010/A1:2015
Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust
atmospheres
Household and similar electrical appliances - Safety - Part 2-4: Particular
requirements for spin extractors
Household and similar electrical appliances - Test code for the
EN 60704-2-5:2005/A1:2015
determination of airborne acoustical noise - Part 2-5: Particular
requirements for electric thermal storage room heaters
EN 60705:2015
EN 60809:2015
EN 60810:2015
EN 60904-2:2015
Household microwave ovens - Methods for measuring performance
Lamps for road vehicles - Dimensional, electrical and luminous
requirements
Lamps for road vehicles - Performance requirements
Photovoltaic devices - Part 2: Requirements for photovoltaic reference
devices
Safety requirements for electrical equipment for measurement, control and
EN 61010-2-081:2015
laboratory use - Part 2-081: Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes
EN 61169-48:2015
Radio-frequency connectors - Part 48: Sectional specification for series
BMP R.F. coaxial connectors
Radio-frequency connectors - Part 50: Sectional specification for RF coaxial
EN 61169-50:2015
connectors with inner diameter of outer conductors 4,11 mm with quick lock
system - Characteristic impedance 50 Ohm (type QMA)
Test methods for electrical materials, printed boards and other
EN 61189-5-2:2015
interconnection structures and assemblies - Part 5-2: General test methods
for materials and assemblies - Soldering flux for printed board assemblies
Test methods for electrical materials, printed boards and other
EN 61189-5-3:2015
interconnection structures and assemblies - Part 5-3: General test methods
for materials and assemblies - Soldering paste for printed board assemblies
Test methods for electrical materials, printed boards and other
EN 61189-5-4:2015
interconnection structures and assemblies - Part 5-4: General test methods
for materials and assemblies - Solder alloys and fluxed and non-fluxed solid
wire for printed board assemblies
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 3-53: Examinations and
EN 61300-3-53:2015
measurements - Encircled angular flux (EAF) measurement method based
on two-dimensional far field data from step index multimode waveguide
(including fibre)
Fibre optic interconnecting devices and passive components - Performance
EN 61753-031-3:2015
standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N nonwavelength-selective branching devices for Category U - Uncontrolled
environment
EN 61811-1:2015
EN 62246-1:2015
EN 62271-104:2015
Electromechanical telecom elementary relays of assessed quality - Part 1:
Generic specification and blank detail specification
Reed switches - Part 1: Generic specification
High-voltage switchgear and controlgear - Part 104: Alternating current
switches for rated voltages higher than 52 kV
Maritime navigation and radiocommunication equipment and systems EN 62320-3:2015
Automatic identification systems (AIS) - Part 3: Repeater stations Minimum operational and performance requirements - Methods of test and
required test results
Framework for energy market communications - Part 451-4: Settlement and
EN 62325-451-4:2015
reconciliation business process, contextual and assembly models for
European market
EN 62343-5-1:2015
HD 62640:2015
Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer Gain tilt settling time measurement
Residual current devices with or without overcurrent protection for socketoutlets for household and similar uses
EN 62741:2015
Demonstration of dependability requirements - The dependability case
EN 62790:2015
Junction boxes for photovoltaic modules - Safety requirements and tests
EN 62817:2015
Photovoltaic systems - Design qualification of solar trackers
EN 62852:2015
EN 60598-2-22:2014/AC:2015
EN 61439-5:2015/AC:2015
Connectors for DC-application in photovoltaic systems - Safety
requirements and tests
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency
lighting
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies
for power distribution in public networks