WoRlDWIDE loCATIoNS
Sumitomo Machinery Corporation of America
Headquarters & Manufacturing
4200 Holland Boulevard
Chesapeake, VA 23323
Tel: +1-757-485-3355 • 1-800-SMCyClo
Fax: +1-757-485-7490
www.sumitomodrive.com
E-mail: customer_service@suminet.com
Mexico
Europe
Chicago (Midwest)
Monterrey
Los Angeles (West)
Mexico City
Sumitomo Machinery Corporation of America
2375 Railroad Street
Corona, CA 92880-5411
Tel: +1-951-340-4100 • 1-800-SMCYCLO
Fax: +1-951-340-4108
SM-Cyclo de Mexico, S.A. de C.V.
Privada Ceylan No. 59-B Bis Colonia
Industrial Vallejo
Delegacion Azcapotzalco, DF Mexico 02300
Tel: +52-55-2282-8700
Austria
Belgium
France
Germany
Italy
Spain
Sweden
United Kingdom
Canada
Guadalajara
Sumitomo Machinery Corporation of America
175 West Lake Drive
Glendale Heights, IL 60139
Tel: +1-630-752-0200 • 1-800-SMCYCLO
Fax: +1-630-752-0208
Toronto (East)
SM-Cyclo of Canada, Ltd.
1045 South Service Road, West
Oakville, Ontario, Canada L6L 6K3
Tel: +1-905-469-1050 • Fax: +1-905-469-1055
Vancouver (West)
SM-Cyclo of Canada, Ltd.
740 Chester Road, Annacis Island, Delta
B.C., Canada V3M 6J1
Tel: +1-604-525-5403 • Fax: +1-604-525-0879
Montreal
SM-Cyclo of Canada, Ltd.
2862 Blvd. Daniel-Johnson
Laval, Quebec, Canada H7P 5Z7
Tel: +1-450-686-8808 • Fax: +1-450-686-8000
SM-Cyclo de Mexico, S.A. de C.V.
Av. Desarrollo No. 541
Parque Industrial Finsa
Guadalupe, N.L., Mexico CP 67114
Tel: +52-81-8144-5130 • Fax: +52-81-8144-5130 ext. 3109
Asia
SM-Cyclo de Mexico S.A. de C.V. Calle
Broca No. 2605, Bodega 4 Parque
Alamo Industrial Tlaqepaque, JAL,
Mexico 44490
Tel: +52-33-3675-4323
Brazil
São Paulo
SM Cyclo Redutores do Brasil Comércio Ltda. Av.
Marquês de São Vicente, 587 – Cj. 16 Barra Funda –
CEP: 01139-001
São Paulo, Brazil
Tel: +55-11-5585-3600 • Fax: +55-11-5585-3600
Chile
China
Hong Kong
Indonesia
Korea
Malaysia
Philippines
Singapore
Taiwan
Thailand
Vietnam
Cyclo® 6000
U.S. Sales and Support
Cyclo® 6000
Speed Reducers
other locations
Santiago
SM Cyclo de Chile Ltda. San
Pablo 3507
Comuna de Quinta Normal - Santiago, Chile
Tel: +56-2-2892-7000 • Fax: +56-2-2892-7001
Australia
India
New Zealand
Antofagasta
SM Cyclo de Chile Ltda. Calle 8,
Manzana N2, Sitio 1
Sector La Negra, Antofagasta, Chile
Tel: +56-5-5256-1611 • Fax: +56-5-5256-1616
Concepción
World Headquarters
Japan
Sumitomo Heavy Industries, Ltd.
Power Transmission & Controls Group
ThinkPark Tower, 1-1, Osaki 2-chome,
Shinagawa-ku, Tokyo 141-6025 Japan
Tel: +81-367-37-2511 • Fax: +81-368-66-5160
Argentina
Buenos Aires
SM-Cyclo de Argentina SA Ing.
Delpini #2236
Area de Promocion el Triangulo, Partido Malvinas Argentinas Grand
Bourg, Buenos Aires, Argentina B1615KGB
Tel: +54-3327-454095 • Fax: +54-3327-454099
Catalog 03.601.50.010; Supersedes Catalog 03.601.50.009
©2015 Sumitomo Machinery Corporation of America Printed in the U.S.A.
Speed Reducers
SM Cyclo de Chile Ltda.
Camino a Coronel Km 10, #5580, Modulo 3-A Comuna:
San Pedro de la Paz – Concepción, Chile
Tel: +56-4-1246-9806 • Fax: +56-4-1246-9808
Catalog 03.601.50.010
Cyclo®
Cyclo®
Cyclo®
Cyclo®6000
6000
6000
6000
Superior
Superior
Superior
Superiordesign,
design,
design,
design,powerful
powerful
powerful
powerfulperformance
performance
performance
performance
Cyclo®
Cyclo®
Cyclo®
Cyclo®
BBB4
BBB4
BBB4
BBB4
Right
Right
Right
Right
Angle,
Angle,
Angle,
Angle,
Spiral
Spiral
Spiral
Spiral
Bevel
Bevel
Bevel
Bevel
Gearbox
Gearbox
Gearbox
Gearbox
with
with
with
with
Cyclo®
Cyclo®
Cyclo®
Cyclo®
Reducer
Reducer
Reducer
Reducer
Input.
Input.
Input.
Input.
Cyclo®
Cyclo®
Cyclo®
Cyclo®
BBB5
BBB5
BBB5
BBB5
Right
Right
Right
Right
Angle,
Angle,
Angle,
Angle,
Spiral
Spiral
Spiral
Spiral
Bevel
Bevel
Bevel
Bevel
Gearbox
Gearbox
Gearbox
Gearbox
with
with
with
with
Cyclo®
Cyclo®
Cyclo®
Cyclo®
Reducer
Reducer
Reducer
Reducer
Input.
Input.
Input.
Input.
Trying
Trying
Trying
Trying
to
to
to
to
select
select
select
select
aaadrive?
adrive?
drive?
drive?
Need
Need
Need
Need
more
more
more
more
technical
technical
technical
technical
specifi
specifi
specifi
specifi
cations?
cations?
cations?
cations?
Need
Need
Need
Need
pricing?
pricing?
pricing?
pricing?
Sumitomo
Sumitomo
Sumitomo
Sumitomo
Drive
Drive
Drive
Drive
Technologies’
Technologies’
Technologies’
Technologies’
online
online
online
online
product
product
product
product
Configurator
Configurator
Confi
Configurator
gurator
streamlines
streamlines
streamlines
streamlines
the
the
the
the
selection
selection
selection
selection
process,
process,
process,
process,
enabling
enabling
enabling
enabling
you
you
you
you
tototo
build
to
build
build
build
our
our
our
our
power
power
power
power
transmission
transmission
transmission
transmission
products
products
products
products
for
for
for
for
your
your
your
your
specific
specific
specifi
specifi
application*.
capplication*.
capplication*.
application*.
Hyponic®
Hyponic®
Hyponic®
Hyponic®
Features
Features
Features
Features
all-steel
all-steel
all-steel
all-steel
hypoid
hypoid
hypoid
hypoid
gear
gear
gear
gear
design,
design,
design,
design,
maintenance-free
maintenance-free
maintenance-free
maintenance-free
grease
grease
grease
grease
lubrication
lubrication
lubrication
lubrication
and
and
and
and
high
high
high
high
effi
effi
effi
ciency
effi
ciency
ciency
ciency
operation.
operation.
operation.
operation.
Available
Available
Available
Available
24
2424
hours
24
hours
hours
hours
aaday,
aday,
aday,
day,
77days
7days
7days
days
aaweek,
aweek,
aweek,
week,
registered
registered
registered
registered
users
users
users
users
quickly
quickly
quickly
quickly
receive
receive
receive
receive
results
results
results
results
that
that
that
that
include:
include:
include:
include:
Download
Download
Download
Download
2D
2D
2D
and
2D
and
and
and
3D
3D
3D
CAD
3D
CAD
CAD
CAD
fifiles
fifiles
les
les
fifiles
les
Product
Product
Product
Product
literature
literature
literature
literature
Technical
Technical
Technical
Technical
specification
specification
specifi
specification
cation
sheet
sheet
sheet
sheet
The
Cyclo® 6000 is also available as an inline Gearmotor
The
TheCyclo®
Cyclo®6000
6000isisalso
alsoavailable
availableasasan
aninline
inline
Gearmotor
Gearmotor
Cyclo®
Cyclo®
Cyclo®
Cyclo®
HBB
HBB
HBB
HBB
Parallel
Parallel
Parallel
Parallel
Shaft,
Shaft,
Shaft,
Shaft,
Helical
Helical
Helical
Helical
Gearbox
Gearbox
Gearbox
Gearbox
with
with
with
with
Cyclo®
Cyclo®
Cyclo®
Cyclo®
Reducer
Reducer
Reducer
Reducer
Input;
Input;
Input;
Input;
features
features
features
features
keyless,
keyless,
keyless,
keyless,
steel
steel
steel
steel
Taper-Grip®
Taper-Grip®
Taper-Grip®
Taper-Grip®
Bushing
Bushing
Bushing
Bushing
for
forfor
for
easy
easy
easy
easy
mounting.
mounting.
mounting.
mounting.
Use
Use
Use
Use
our
our
our
our
online
online
online
online
product
product
product
product
confi
confi
configurator
configurator
gurator
guratortototo
build
to
build
build
build
aaCyclo®
aCyclo®
aCyclo®
Cyclo®
tototo
fito
fit tfitfit
your
your
your
your
application.
application.
application.
application.
See
See
See
See
inside
inside
inside
inside
back
back
back
back
cover
cover
cover
cover
for
for
for
further
for
further
further
further
details.
details.
details.
details.
Confi
Confi
Configure
Configure
gure
gureyour
your
your
your
Cyclo®
Cyclo®
Cyclo®
Cyclo®
today
today
today
today
atatatat
www.sumitomodrive.com/confi
www.sumitomodrive.com/confi
www.sumitomodrive.com/confi
www.sumitomodrive.com/confi
gurator
gurator
gurator
gurator
HSM
HSM
HSM
HSM
Helical
Helical
Helical
Helical
Shaft
Shaft
Shaft
Shaft
Mounted
Mounted
Mounted
Mounted
Speed
Speed
Speed
Speed
Reducer
Reducer
Reducer
Reducer
available
available
available
available
with
with
with
with
CEMA
CEMA
CEMA
CEMA
Screw
Screw
Screw
Screw
Conveyor
Conveyor
Conveyor
Conveyor
Drive
Drive
Drive
Drive
Option.
Option.
Option.
Option.
Request
Request
Request
Request
for
for
for
quote**
for
quote**
quote**
quote**
Quotations**
Quotations**
Quotations**
Quotations**
This
This
This
This
unique
unique
unique
unique
interactive
interactive
interactive
interactive
tool
tool
tool
tool
isisone
isone
isone
one
more
more
more
more
reason
reason
reason
reason
Sumitomo
Sumitomo
Sumitomo
Sumitomo
Drive
Drive
Drive
Drive
Technologies
Technologies
Technologies
Technologies
isisthe
isthe
isthe
the
world’s
world’s
world’s
world’s
premier
premier
premier
premier
power
power
power
power
transmission
transmission
transmission
transmission
and
and
and
and
control
control
control
control
solutions
solutions
solutions
solutions
provider.
provider.
provider.
provider.
* Not
* Not
* Not
*allNot
allproducts
all
products
allproducts
products
are
areavailable
are
available
areavailable
available
forforconfiguration
for
configuration
forconfi
confi
guration
guration
****Not
**
Not
**Not
available
Not
available
available
available
forforall
for
all
for
markets.
all
markets.
allmarkets.
markets.
Configure
Configure
Confi
Configure
gure
your
your
your
your
Cyclo®
Cyclo®
Cyclo®
Cyclo®
today
today
today
today
atatatat
www.sumitomodrive.com/Confi
www.sumitomodrive.com/Confi
www.sumitomodrive.com/Confi
www.sumitomodrive.com/Confi
gurator
gurator
gurator
gurator
To
request
request
acatalog,
acatalog,
catalog,
or
for
for
more
more
information
information
on
on
any
any
of
our
our
high
high
quality
quality
products,
products,
please
please
visit
visit
our
our
website:
website:
To
ToTo
request
request
aacatalog,
ororor
for
for
more
more
information
information
on
on
any
any
ofofof
our
our
high
high
quality
quality
products,
products,
please
please
visit
visit
our
our
website:
website:
www.sumitomodrive.com
www.sumitomodrive.com
Product
Product
Product
Product
ratings
ratings
ratings
ratings
Paramax®
Paramax®
Paramax®
Paramax®
9000
9000
9000
9000
Right
Right
Right
Right
Angle
Angle
Angle
Angle
and
and
and
and
Offset
Offset
Off
Off
set
Parallel
set
Parallel
Parallel
Parallel
Industrial
Industrial
Industrial
Industrial
Gearboxes
Gearboxes
Gearboxes
Gearboxes
inininin
Universal
Universal
Universal
Universal
Housing.
Housing.
Housing.
Housing.
2916_14-sec1_Cyclo6000RedcrSect1v003 4/4/15 11:01 AM Page 1.1
Speed Reducers
Cyclo® 6000 boasts an expanded range of standard
sizes and ratings. Use this chart to select a new
Cyclo® 6000 when replacing Cyclo® series 3000 and
4000 models.
CYCLO® Frame Size
Table of Contents
Cross Reference
3000
SERIES
4000 6000
3075
4075
3085
4085
3090
3095
3097
3100
3105
310H
4090
4095
4097
4100
4105
410H
3110
3115
311H
3140
3145
4110
4115
4125
4130
4135
3155
315H
3160
3165
316H
3170
3175
3180
3185
3190
3195
3205
3215
3225
3235
3245
3255
3265
3275
4145
4155
4160
4165
416H
4170
4175
4180
4185
4190
4195
4205
4215
4225
4235
4245
4255
4265
4275
6060
6065
6070
6075
6080
6085
6090
6095
6095
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
6195
6205
6215
6225
6235
6245
6255
6265
6275
1. General Information
2. How to Select a Speed Reducer
How to Select. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
AGMA Load Classifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4
Housing Styles & Mounting Positions . . . . . . . . . . . . . . . . . 2.5
Configure a Model Number (Nomenclature). . . . . . . . . . . 2.6
3. Selection Tables
Single Reduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1
Double Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.23
4. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1
5. Technical Information
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2
Overhung Load Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6
Axial Load Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13
Slide Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.14
Food Industry Option Packages. . . . . . . . . . . . . . . . . . . . . . 5.15
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16
2916_14-sec1_Cyclo6000RedcrSect1v003 4/4/15 11:01 AM Page 1.2
Cyclo® 6000
All rotating components are
fully hardened, vacuum
degassed bearing grade
steel, for consistent, reliable
performance
Wide variety of
inputs available,
including C-Face,
Free-Shaft,
Gearmotor and
Brakemotor
High power density.
All reduction contained
in compact ring gear
housing
Rugged, shock-resistant
cast iron housing.
Optional ductile iron
also available
Superior seal design
using wear sleeves
and pressure-rated
seals
Unique oil sight gauge for
simple, visible lubrication
indication
Unmatched Reliability,
Exceptional Performance
Cyclo® speed reducers and gearmotors are
designed to withstand shock loads
exceeding 500% of their ratings
1.2 General Information
Cyclo® 6000 Series
2916_14-sec1_Cyclo6000RedcrSect1v003 4/4/15 11:01 AM Page 1.3
Highly Reliable, Torque Dense
Cycloidal Speed Reducers
Product Description
Sumitomo Cyclo® speed reducers and gearmotors are the premier
in-line drives. The revolutionary Cyclo® design provides quiet,
efficient and reliable performance exceeding that of involute
tooth gear designs. The key to Cyclo®'s matchless performance
and reliability is that 67% of the reduction components are in contact at all times, compared to geared designs that use only limited
tooth contact. Unlike geared designs, the Cyclo®'s reduction components operate in compression rather than shear, which results in
exceptionally rugged and shock resistant performance. The
Cyclo® technology coupled with innovative product options and
accessories offer the most extensive range of application solutions
available.
Sumitomo’s Cyclo® 6000 is a highly reliable,
torque dense cycloidal speed reducer and
gearmotor
Features & Benefits
• Cycloidal speed reduction technology
~ Quiet, efficient and reliable operation with high torque
density and compact size
• Modular design
~ Interchangeable cast iron housings in foot, flanged or face
mount configurations
• Universal mounting arrangements
~ Available free-shaft, quill hollow shaft, C-face, shovel base,
and top-mount inputs
• Internal components manufactured from hardened,
vacuum-degassed, bearing grade steel
~ Minimal vibration, low noise, low backlash and extended
operational life
• The best product warranty
~ The 24 month warranty backs up the superb Cyclo®
product reputation
• Simple, Compact Design
Specifications
• Rugged Forged Output Shaft
Sizes:
Torque Rating:
HP Rating:
Ratio Range:
23 sizes (5lbs to 5000lbs)
55 to 603,000 lb in
.10 to 235 HP
3:1 to 119:1 (single)
104:1 to 7569:1 (double)
8041:1 to 658,503:1 (triple)
Mounting:
Foot, Flange, Face Mount
Motor Standards: NEMA, IEC, JIS, UL, CSA, CE
• Universal Mounting
• C-Face, Shovel Base & Top Mount Options
Applications
• Conveyors
• Food Machinery
• Mixers
• Automotive Plants
• Recycling Machines
• Poultry Plants
Cyclo® 6000 Series
• Sawmills and Wood Mills
• Wastewater Treatment
• Steel Mills
• Construction Equipment
• Paper Mills
• Processing Plants
General Information 1.3
2916_14-sec1_Cyclo6000RedcrSect1v003 4/4/15 11:01 AM Page 1.4
CYCLO® 6000 Speed Reducers
Product Range (Standard Motor and Reducer Combinations)
Single Reduction Ratios 3 – 119
Combinations with 1750 RPM input speed
Ratio
Output Speed
RPM (60 Hz)
3
5
6
8
11
13
15
17
21
25
29
35
43
51
59
71
87
119
583
350
292
219
159
135
117
103
83.3
70.0
60.3
50.0
40.7
34.3
29.7
24.6
20.1
14.7
1/8
1/4
1/3
1/2
Ratios 11 – 87
3/4
Combinations with 1165 RPM
input speed
1
1.5
2
Ratio
11
Output Speed 106
RPM (60 Hz)
3
5
Motor
HP
7.5
20
10
25
15
30
20
21
29
43
59
87
55.5
40.2
27.1
19.7
13.4
40
25
Motor
HP
30
50
60
40
75
50
100
60
125
75
150
100
175
Double Reduction Ratios 104 – 7569
Ratio 104
Output Speed 16.8
RPM (60 Hz)
15
77.7
Combinations with 1750 RPM input speed
121
143
165
195
231
273
319
377
473
559
649
731
841
1003 1247 1479 1849 2065 2537 3045 3481 4437 5133 6177 7569
14.5
12.2
10.6
8.97
7.58
6.41
5.49
4.64
3.70
3.13
2.70
2.39
2.08
1.74
1.40
400
212
1.18 .0946 0.847 0.690 0.575 0.503 0.394 0.341 0.283 0.231
1/8
1/4
1/3
1/2
3/4
1
1.5
2
Motor
HP
3
5
7.5
10
15
20
25
30
40
50
60
OUTPUT min.
212
212
212
TORQUE
lb•in max. 65,000 280,000 67,000
1.4 General Information
212
212
390,000
410,000
212
400
212
1325
212
400
1325
4500
600,000
Cyclo® 6000 Series
2916_14-sec1_Cyclo6000RedcrSect1v003 4/4/15 11:01 AM Page 1.5
CYCLO® 6000 Speed Reducers
FAQs
How do I select a Cyclo® speed reducer or gearmotor?
Selection is based on the actual horsepower and/or torque requirements at the output
shaft. The Cyclo® speed reducer has particularly high efficiencies over a wide range of
reduction ratios, which frequently permits the use of reduced input power requirements
(smaller HP motor) without sacrificing output shaft torque. The selection procedures in this
catalog will guide you in choosing the most efficient reducer for your application.
Common Configurations
What information do I need to get started in the selection process?
To select the proper reducer for your application, you will need to know:
• Application: type of driven machine
Single Reduction,
Horizontal Flange Mount
with Hollow Shaft Input
• Hours of operation per day
• Motor horsepower (HP) and speed (RPM)
• Mounting position
If there are any special environmental factors or operation requirements, they must also be
noted. This information will be important in determining the Service Factor of your
application.
What are Service Factors and how are they used?
In general, reducers and gearmotors are rated for the specific conditions and operating
requirements of the application by the use of AGMA-defined Service Factors. There are
three AGMA load classifications for reducers: uniform (U), moderate shock (M) and heavy
shock (H) (page 2.3) The Service Factors are used in the product selection process to adjust
for the specific conditions and operating requirements of your application.
Single Reduction, Flange Mount
with C-Face Adapter
What do I do if my application has particularly severe operating conditions?
The standard ratings for Cyclo® are based on 10-hour daily service under conditions of uniform loads (equivalent to AGMA service factor 1.0). By following the product selection
process, you will determine and apply the Service Factors to compensate for the severe
operating conditions.
How can I be sure that the reducer can withstand periodic excessive overloads?
Cyclo® Speed Reducers provide 500% momentary intermittent shock load capacity. For
applications with shock loads greater than 500%, consult an SMA Application Engineer.
Single Reduction, V-Flange Mount
with C-Face Adapter
What are the standard input speeds?
In general terms, the speeds are 1750 and 1165 RPM. The selection tables in this catalog
are based on 1750, 1165, 870, 580, and 50 RPM. When non-standard input speeds are used,
the horsepower and torque ratings also vary.
What thermal capacity limitations does the Cyclo® have?
The Cyclo® speed reducer, by virtue of its smooth, almost frictionless operation (unlike traditional helical gears), has a thermal rating that far exceeds its mechanical capacity and all
but eliminates the conventional limitations due to heat.
Double Reduction with
C-Face Adapter
Cyclo® 6000 Series
General Information 1.5
2916_14-sec1_Cyclo6000RedcrSect1v003 4/4/15 11:01 AM Page 1.6
CYCLO® 6000 Speed Reducers
Standard Specifications
Reducer
Ambient
Conditions
Reduction:
Internal planetary gear mechanism with trochoidal curved tooth profile.
Lubrication:
Grease or oil lubricated models available.
Seals:
Nitrile material, dual lipped, double output seals available.
Material:
Rugged cast iron or ductile housings.
Paint Color:
Blue, Munsell color number 6.5PB 3.6/8.2
Installation Location:
Indoors (Minimal dust and humidity)
Ambient Temperature:
14°~104° F (-10º ~ 40º C)
Ambient Humidity:
Under 85%
Elevation:
Under 3,281 ft. (1000 meters)
Atmosphere:
Well ventilated location, free of corrosive gases, explosive gases, vapors and dust.
Shaft Rotation
On single reduction Cyclo® speed reducers, ratios 3 through 119, the slow speed shaft rotates in a reverse direction
to that of the high speed shaft.
On double reduction units, ratios 104 through 7569, both the high speed and the slow speed shaft rotate in the
same direction.
Input Speeds
In general terms, the standard input speeds of single reduction units are 1750, 1165, 875, 580, and 50 RPM. When
non-standard input speeds are used, the horsepower and torque ratings will also vary.
Thermal Capacity
The Cyclo® speed reducer’s smooth, almost frictionless operation all but eliminates the conventional limitations due
to heat. In all sizes, Cyclo® speed reducers have thermal ratings that exceed their mechanical capacity.
1.6 General Information
Cyclo® 6000 Series
2916_14-sec2_38638_Sect2 4/4/15 10:51 AM Page 2.1
CYCLO® 6000 Speed Reducers
2
How to
Select
How to Select
Cyclo® 6000 Series
How to Select
2.1
2916_14-sec2_38638_Sect2 4/4/15 10:51 AM Page 2.2
CYCLO® 6000 Speed Reducers
How to Select a Speed Reducer
Step 1:
Collect data about your application
Before starting you need to know the:
• Application (e.g. Conveyor, Mixer, etc.)
• Hours of Operation per day
• Motor Horsepower (HP) and Input Speed (RPM)
• Desired Output Speed
• Mounting Position and Style
• Overhung or Thrust Loads
• Ambient Conditions
Step 2:
Select a Frame Size
2A: Find the Load Classification of your application in the
AGMA Load Classification Table on page 2.4.
How to
Select
2B: Find the recommended Service Factor using the
Recommended Reducer Service Factor Table on the right.
2C: Determine the Selection Horsepower by multiplying
the Motor Horsepower by the Service Factor.
2D: Select a Frame Size from the Reducer Selection Tables on
pages 3.1–3.35 by matching both the Selection Horsepower
and Desired Output Speed (RPMs) to a Frame Size
model number.
Step 3:
Select a Housing Style and Mounting Position
Select a Housing Style from chart on page 2.5.
Step 4:
Verify Dimensions
Use the Dimensions information on pages 4.1–4.97
to verify that the selected Frame Size is appropriate.
Step 5:
Choose Options
The following options may apply:
• C-Face Adapter
• Hollow Quill Adapter
• Top Motor Mount
• Shovel Base
Please see the Cyclo® price list, or visit our website at
www.sumitomodrive.com for other available modifications.
Step 6:
Configure a Model Number
Go to page 2.6 to configure a model number.
Note: You will use the information you gather from the
procedure on this page to Configure a Model Number.
2.2 How to Select
Cyclo® 6000 Series
2916_14-sec2_38638_Sect2 4/4/15 10:51 AM Page 2.3
CYCLO® 6000 Speed Reducers
The Service Factor table below presents both AGMA standard service factors and Cyclo® service factors.
Cyclo® service factors are smaller than AGMA, based on the Cyclo® strength and performance experience.
If your application requires AGMA specified service factors, then the AGMA value should be used.
Otherwise, the Cyclo® service factor should be used.
Load Classifications
Uniform
Prime Mover
Service Duration
Moderate Shock
Heavy Shock
AGMA
Cyclo®
AGMA
Cyclo®
AGMA
Cyclo®
Electric Motor
1/2 hr. per day (Occasional)
3 hrs. per day (Intermittent)
Up to 10 hrs. per day
24 hrs. per day
0.50
0.80
1.00
1.25
0.50
0.80
1.00
1.20
0.80
1.00
1.25
1.50
0.80
1.00
1.20
1.35
1.25
1.50
1.75
2.00
1.20
1.35
1.50
1.60
Multi Cylinder
Internal
Combustion
Engine
1/2 hr. per day (Occasional)
3 hrs. per day (Intermittent)
Up to 10 hrs. per day
24 hrs. per day
0.80
1.00
1.25
1.50
0.80
1.00
1.20
1.35
1.00
1.25
1.50
1.75
1.00
1.20
1.35
1.50
1.50
1.75
2.00
2.25
1.35
1.50
1.60
1.70
Single Cylinder
Internal
Combustion
Engine
1/2 hr. per day (Occasional)
3 hrs. per day (Intermittent)
Up to 10 hrs. per day
24 hrs. per day
1.00
1.25
1.50
1.75
1.00
1.20
1.35
1.50
1.25
1.50
1.75
2.00
1.20
1.35
1.50
1.60
1.75
2.00
2.25
2.50
1.50
1.60
1.70
1.80
Determine
Selection
Horsepower (HP)
Example:
Motor HP
10 Motor HP
X
X
Service Factor
1.25 Service Factor
=
=
How to
Select
Service Factors
Selection HP
12.5 Selection HP
If Overhung or Axial
Load are present,
any Overhung or
Axial Load must be
checked against the
capacity of the
selection.
Select a
Frame Size
For special circumstances in selecting a
Frame Size such as:
• Overhung Load
• Axial Loads
• Shock Loading
Consult Technical
Information, pages
5.6–5.13.
Cyclo® 6000 Series
How to Select
2.3
2916_14-sec2_38638_Sect2 4/4/15 10:51 AM Page 2.4
CYCLO® 6000 Speed Reducers
AGMA Load Classifications
AGMA
Tables
TYPE OF
APPLICATION
TYPE OF
LOAD
Agitators
Pure liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Liquids and solids . . . . . . . . . . . . . . . . . . . . . . M
Variable-density liquids . . . . . . . . . . . . . . . . . . M
Blowers
Centrifugal . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Lobe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Vane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Brewing and Distilling
Bottling machinery . . . . . . . . . . . . . . . . . . . . . . U
Brew kettles, cont. duty . . . . . . . . . . . . . . . . . . U
Cookers, cont. duty . . . . . . . . . . . . . . . . . . . . . U
Mash tubs, cont. duty . . . . . . . . . . . . . . . . . . . U
Scale hopper, frequent starts . . . . . . . . . . . . . M
Can Filling Machines . . . . . . . . . . . . . . . . . . . . . . . U
Cane Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Car Dumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Car Pullers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Clarifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Classifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Clay Working Machinery
Brick press . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Briquette machine . . . . . . . . . . . . . . . . . . . . . . H
Clay working machinery . . . . . . . . . . . . . . . . . M
Pug mill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Compressors
Centrifugal . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Lobe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Reciprocating, multi-cylinder . . . . . . . . . . . . . . M
Reciprocating, single-cylinder . . . . . . . . . . . . . H
Conveyors — Uniformly Loaded or Fed
Apron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Flight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Conveyors — Heavy Duty, Not Uniformly Fed
Apron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Flight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Live roll oven . . . . . . . . . . . . . . . . . . . . . . . . . . M
Reciprocating . . . . . . . . . . . . . . . . . . . . . . . . . . H
Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Shaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Cranes (Except for Dry Dock Cranes)
Main hoists . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Bridge travel . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Trolley travel . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Crusher
Ore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Stone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Sugar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Dredges
Cable reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Conveyors . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Cutter head drives . . . . . . . . . . . . . . . . . . . . . . H
Jig drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Maneuvering winches . . . . . . . . . . . . . . . . . . . M
Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Screen drive . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Stackers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Utility winches . . . . . . . . . . . . . . . . . . . . . . . . . M
Dry Dock Cranes . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Elevators
Bucket, uniform load . . . . . . . . . . . . . . . . . . . . U
Bucket, heavy load . . . . . . . . . . . . . . . . . . . . . M
Bucket, cont. . . . . . . . . . . . . . . . . . . . . . . . . . . U
Centrifugal discharge . . . . . . . . . . . . . . . . . . . . U
Escalators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Freight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Gravity discharge . . . . . . . . . . . . . . . . . . . . . . . U
Man lifts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Passenger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Extruders (Plastics)
Blow molders . . . . . . . . . . . . . . . . . . . . . . . . . . M
Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Pre-plasticizers . . . . . . . . . . . . . . . . . . . . . . . . M
Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Fans
Centrifugal . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Cooling towers . . . . . . . . . . . . . . . . . . . . . . . . . S
Forced draft . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Induced draft . . . . . . . . . . . . . . . . . . . . . . . . . . M
Large (mine, etc.) . . . . . . . . . . . . . . . . . . . . . . . M
2.4 How to Select
TYPE OF
APPLICATION
TYPE OF
LOAD
Large (industrial) . . . . . . . . . . . . . . . . . . . . . . . M
Light (small diameter) . . . . . . . . . . . . . . . . . . . . U
Feeders
Apron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Reciprocating . . . . . . . . . . . . . . . . . . . . . . . . . . H
Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Food Industry
Beet slicer . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Cereal cooker . . . . . . . . . . . . . . . . . . . . . . . . . . U
Dough mixer . . . . . . . . . . . . . . . . . . . . . . . . . . M
Meat grinders . . . . . . . . . . . . . . . . . . . . . . . . . . M
Generators (Not Welding) . . . . . . . . . . . . . . . . . . . . U
Hammer Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Hoists
Heavy duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Medium duty . . . . . . . . . . . . . . . . . . . . . . . . . . M
Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Laundry Washers — Reversing . . . . . . . . . . . . . . . M
Laundry Tumblers . . . . . . . . . . . . . . . . . . . . . . . . . . M
Line Shaft
Drive processing equipment . . . . . . . . . . . . . . M
Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Other line shafts . . . . . . . . . . . . . . . . . . . . . . . . U
Lumber Industry
Barkers — hydraulic and mechanical . . . . . . . S
Burner conveyor . . . . . . . . . . . . . . . . . . . . . . . M
Chain Saw and Drag Saw . . . . . . . . . . . . . . . . . . . . H
Chain transfer . . . . . . . . . . . . . . . . . . . . . . . . . . H
Craneway transfer . . . . . . . . . . . . . . . . . . . . . . H
De-barking drum . . . . . . . . . . . . . . . . . . . . . . . S
Edger feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Gang feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Geen chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Live rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Log haul-lockline . . . . . . . . . . . . . . . . . . . . . . . H
Log turning device . . . . . . . . . . . . . . . . . . . . . . H
Main log conveyor . . . . . . . . . . . . . . . . . . . . . . H
Off bearing rolls . . . . . . . . . . . . . . . . . . . . . . . . M
Planer feed chains . . . . . . . . . . . . . . . . . . . . . . M
Planer floor chains . . . . . . . . . . . . . . . . . . . . . . M
Planer tilting hoist . . . . . . . . . . . . . . . . . . . . . . M
Re-saw merry-go-round conveyor . . . . . . . . . M
Roll cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Slab conveyor . . . . . . . . . . . . . . . . . . . . . . . . . H
Small waste-conveyor-belt . . . . . . . . . . . . . . . U
Small waste-conveyor-chain . . . . . . . . . . . . . . M
Sorting table . . . . . . . . . . . . . . . . . . . . . . . . . . M
Tipple hoist conveyor . . . . . . . . . . . . . . . . . . . M
Tipple hoist drive . . . . . . . . . . . . . . . . . . . . . . . M
Transfer conveyors . . . . . . . . . . . . . . . . . . . . . M
Transfer rolls . . . . . . . . . . . . . . . . . . . . . . . . . . M
Tray drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Trimmer feed . . . . . . . . . . . . . . . . . . . . . . . . . . M
Waste conveyor . . . . . . . . . . . . . . . . . . . . . . . . M
Machine Tools
Bending roll . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Notching press, belt driven . . . . . . . . . . . . . . . S
Plate planer . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Punch press, gear driven . . . . . . . . . . . . . . . . . H
Tapping machine . . . . . . . . . . . . . . . . . . . . . . . H
Other machine tools
Main drives . . . . . . . . . . . . . . . . . . . . . . . . M
Auxiliary drives . . . . . . . . . . . . . . . . . . . . . . U
Metal Mills
Draw bench carriage and main drive . . . . . . . M
Forming machines . . . . . . . . . . . . . . . . . . . . . . H
Pinch, dryer and scrubber rolls, reversing . . . . S
Slitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Table conveyors, nonreversing
Group drives . . . . . . . . . . . . . . . . . . . . . . . M
Individual drives . . . . . . . . . . . . . . . . . . . . . H
Table conveyors, reversing . . . . . . . . . . . . . . . . S
Wire drawing and flattening machine . . . . . . . M
Wire winding machine . . . . . . . . . . . . . . . . . . . M
Mills, Rotary Type
Ball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Cement kilns . . . . . . . . . . . . . . . . . . . . . . . . . . M
Dryers and coolers . . . . . . . . . . . . . . . . . . . . . M
Kilns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Pebble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Rod, plain and wedge bar . . . . . . . . . . . . . . . . M
Tumbling barrels . . . . . . . . . . . . . . . . . . . . . . . . H
Mixers
Concrete mixers, cont. . . . . . . . . . . . . . . . . . . M
Concrete mixers, intermittent . . . . . . . . . . . . . M
Constant density . . . . . . . . . . . . . . . . . . . . . . . U
Variable density . . . . . . . . . . . . . . . . . . . . . . . . M
Oil Industry
Chillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Oil well pumps . . . . . . . . . . . . . . . . . . . . . . . . . S
Paraffin filter press . . . . . . . . . . . . . . . . . . . . . . M
Rotary kilns . . . . . . . . . . . . . . . . . . . . . . . . . . . M
TYPE OF
APPLICATION
TYPE OF
LOAD
Paper Mills
Agitators (mixers) . . . . . . . . . . . . . . . . . . . . . . . M
Barker, hydraulic . . . . . . . . . . . . . . . . . . . . . . . . S
Barker, mechanical . . . . . . . . . . . . . . . . . . . . . . S
Barking drum . . . . . . . . . . . . . . . . . . . . . . . . . . S
Beater and pulper . . . . . . . . . . . . . . . . . . . . . . M
Bleacher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Calenders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Calenders, super . . . . . . . . . . . . . . . . . . . . . . . H
Converting machine (except cutters, platers) . M
Conveyors . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Couch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Cutters, platers . . . . . . . . . . . . . . . . . . . . . . . . . H
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Dryers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Felt stretcher . . . . . . . . . . . . . . . . . . . . . . . . . . M
Felt whipper . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Jordans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Log haul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Presses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Pulp machine reel . . . . . . . . . . . . . . . . . . . . . . M
Stock chest . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Suction roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Washers and thickeners . . . . . . . . . . . . . . . . . M
Winders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Printing Presses . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Pullers, Barge Haul . . . . . . . . . . . . . . . . . . . . . . . . . H
Pumps
Centrifugal . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Proportioning . . . . . . . . . . . . . . . . . . . . . . . . . . M
Reciprocating
Single acting, 3 or more cylinders . . . . . . M
Double acting, 2 or more cylinders . . . . . . M
Rotary-gear type . . . . . . . . . . . . . . . . . . . . . . . U
Rubber and Plastics Industries
Crackers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Laboratory equipment . . . . . . . . . . . . . . . . . . . M
Mixing mills . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Refiners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Rubber calenders . . . . . . . . . . . . . . . . . . . . . . M
Rubber mill (2 on line) . . . . . . . . . . . . . . . . . . . M
Rubber mill (3 on line) . . . . . . . . . . . . . . . . . . . U
Sheeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Tire building machines . . . . . . . . . . . . . . . . . . . S
Tire and tube press openers . . . . . . . . . . . . . . S
Tubers and strainers . . . . . . . . . . . . . . . . . . . . M
Warming mills . . . . . . . . . . . . . . . . . . . . . . . . . M
Sand Muller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Screens
Air washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Rotary, stone or gravel . . . . . . . . . . . . . . . . . . M
Traveling water intake . . . . . . . . . . . . . . . . . . . U
Sewage Disposal Equipment
Bar screens . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Chemical fenders . . . . . . . . . . . . . . . . . . . . . . . U
Collectors, circuline or straightline . . . . . . . . . . U
Dewatering screens . . . . . . . . . . . . . . . . . . . . . M
Grit collectors . . . . . . . . . . . . . . . . . . . . . . . . . . U
Scum breakers . . . . . . . . . . . . . . . . . . . . . . . . . M
Slow or rapid mixers . . . . . . . . . . . . . . . . . . . . M
Sludge collectors . . . . . . . . . . . . . . . . . . . . . . . U
Thickeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Vacuum filters . . . . . . . . . . . . . . . . . . . . . . . . . M
Slab Pushers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Steering Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Stokers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
Sugar Industry
Cane knives . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Crushers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Textile Industry
Batchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Calenders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Dry cans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Dryers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Dyeing machinery . . . . . . . . . . . . . . . . . . . . . . M
Knitting machines . . . . . . . . . . . . . . . . . . . . . . . S
Looms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Mangles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Nappers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Range drives . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Slashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Soapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Spinners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Tenter frames . . . . . . . . . . . . . . . . . . . . . . . . . . M
Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Winders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M
Windlass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
U = Uniform Load
M = Moderate Shock
H = Heavy Shock
S = Contact Sumitomo
Cyclo® 6000 Series
2916_14-sec2_38638_Sect2 4/4/15 10:51 AM Page 2.5
CYCLO® 6000 Speed Reducers
Mounting
Positions
Housing Styles & Mounting Positions
Cyclo® 6000 Series
How to Select
2.5
2916_14-sec2_38638_Sect2 4/4/15 10:51 AM Page 2.6
CYCLO® 6000 Speed Reducers
Configure a Model Number
Output Shaft Orientation
Type
Prefix
Horizontal
H
Vertical
V
Vertical Up (Solid Shaft)
W
Universal Direction
N
Housing Style
Type
Prefix
Foot
H
Flange
F
V-Flange
V
Nomenclature
Input Connection
Input Connection
Prefix
None
-
C-Face Adapter
J
Hollow Input Shaft
X
Top Mount
P
No Symbol
J
X
P
Reducers
With Adapter
Hollow Shaft
Top Mount
Modification (Special)
Prefix
Special
S
Standard
–
Frame Size (from Selection Tables)
Shaft Specifications
Input
Shaft
Inch
Metric DIN
Metric JIS
C H H
0
-
6 1 6 5
Suffix
Y
G
-
Y - SB - 29
Frame size
Ratio
Modification (Special feature)
Input connection
Mounting style
Output shaft orientation
Reducer specification
Shaft specification
C = Ratios 6:1 and greater (Cyclo® Speed Reducer product code)
P = Ratios 3:1 and 5:1 (Cyclo® 6000 planetary product code)
2.6 How to Select
Cyclo® 6000 Series
2916_14-sec2_38638_Sect2 4/4/15 10:51 AM Page 2.7
CYCLO® 6000 Speed Reducers
Nomenclature
Example
CHH – 6165Y – 29
6165 – Frame Size
Y – Inch Shaft
29 – Ratio
Nomenclature
C – Cyclo® 6000
H – Horizontal O/P
H – Foot Mount
Type
Torque Limiter
Suffix
TL
High Capacity Bearing
R1
High Capacity Bearing
Ductile Casing
R2
Baseplate
BP
Shovel Base
Reducer
Specification
SB
Top Mount
Center
Right
Left
–
PR
PL
HH Type
Ceiling
Left Wall
Right Wall
H1
H2
H3
Low Backlash
LB
Ratio
Nominal
Total Ratio
Cyclo® 6000 Series
How to Select
2.7
2916_14-sec2_38638_Sect2 4/4/15 10:51 AM Page 2.8
CYCLO® 6000 Speed Reducers
Reduction Ratios
Standard Reduction Ratios
Single Reduction
3*
5*
6
8
11
13
15
17
21
25
29
35
43
51
59
71
87
119
104
(13x8)
121
(11x11)
143
(13x11)
165
(15x11)
195
(15x13)
231
(21x11)
273
(21x13)
319
(29x11)
377
(29x13)
473
(43x11)
559
(43x13)
649
(59x11)
731
(43x17)
841
(29x29)
1003
(59x17)
1247
(43x29)
1479
(87x17)
1849
(43x43)
2065
(59x35)
2537
(59x43)
3045
(87x35)
3481
(59x59)
4437
(87x51)
5133
(87x59)
6177
(87x71)
7569
(87x87)
Double Reduction
Reduction
Ratios
* Note: Ratios 3 and 5 are planetary.
Optional Reduction Ratios
The following reduction ratios may also be available for certain specifications; please consult factory. The output shaft RPM listed in the table below
represents coupling the reducer with a four-pole motor, 60 Hz, input speed 1750 RPM.
Reduction Ratio
Output Speed RPM
Reduction Ratio
Output Speed RPM
Reduction Ratio
Output Speed RPM
Reduction Ratio
Output Speed RPM
Reduction Ratio
Output Speed RPM
Reduction Ratio
Output Speed RPM
2.8 How to Select
88
90
102
120
126
136
150
168
(11x8)
(15x6)
(17x6)
(15x8)
(21x6)
(17x8)
(25x6)
(21x8)
19.9
19.4
17.2
14.6
13.9
13.9
11.7
10.4
10.4
10.1
255
258
275
280
289
306
315
325
344
232
(29x8)
7.54
425
(25x17)
4.12
663
(51x13)
169
174
(13x13) (29x6)
(17x15) (43x6) (25x11) (35x8) (17x17) (51x6) (21x15) (25x13) (43x8)
6.86
6.87
6.36
6.25
6.06
5.72
5.56
426
435
441
455
472
493
522
(71x6) (29x15) (21x21) (35x13) (59x8) (29x17) (87x6)
5.38
5.09
525
561
(35x15) (51x11)
187
200
210
221
225
(17x11)
(25x8)
(35x6)
(17x13)
(15x15)
8.33
7.92
7.78
9.36
354
(59x6)
4.94
568
(71x8)
4.11
4.02
3.97
3.85
3.71
3.55
3.35
3.33
3.12
3.08
696
725
735
765
767
781
867
875
885
903
8.75
357
375
(21x17) (25x15)
4.90
595
4.67
609
(35x17) (29x21)
2.94
923
2.87
957
(87x8) (29x25) (35x21) (51x15) (59x13) (71x11) (51x17) (35x25) (59x15) (43x21) (71x13) (87x11)
2.64
2.51
2.41
2.38
2.29
2.28
2.24
2.02
2.00
1.98
1.94
1071
1075
1131
1207
1225
1239
1275
1305
1475
1491
1505
1.90
1711
1.83
1775
(51x21) (43x25) (87x13) (71x17) (35x35) (59x21) (51x25) (87x15) (59x25) (71x21) (43x35) (59x29) (71x25)
1.63
1.63
1.55
1.45
1.43
1.41
1.37
1.34
1.19
1.17
1.16
2059
2175
2193
2485
2523
2601
3009
3053
3621
3741
4189
1.02
0.99
385
408
(35x11)
(51x8)
4.55
4.29
625
645
(25x25)
(43x15)
2.80
2.71
1015
1065
(35x29)
(71x15)
1.72
1.64
1785
1827
(51x35)
(87x21)
0.98
0.96
5041
(71x29) (87x25) (51x43) (71x35) (87x29) (51x51) (59x51) (71x43) (71x51) (87x43) (71x59) (71x71)
0.85
0.80
0.80
0.70
0.69
0.67
0.58
0.57
0.48
0.47
0.42
0.35
Cyclo® 6000 Series
3
Selection Tables
Single Reduction
Selection
Tables
Speed
Reducers
Double Reduction see page 3.23
Cyclo® 6000 Series
Frame Size Selection Tables • SINGLE Reduction 3.1
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1750 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
583
3[1]
3.15
324
687
4.26
434
680
6.80
699
867
7.79
796
862
12.6
1294
997
15.2
1557
983
17.4
1792
1558
350
5[1]
3.15
540
813
4.26
726
806
6.80
1159
1026
7.79
1335
1022
12.6
2157
1181
15.2
2596
1165
17.4
2986
1848
292
6
0.27
55.0
163
0.38
78.8
168
0.47
95.5
293
0.55
112
289
0.80
163
403
1.04
214
401
1.54
316
595
2.04
417
591
3.15
646
864
4.27
877
858
4.77
972
970
5.26
1080
968
6.81
1400
1090
7.80
1610
1090
12.6
2590
1260
15.2
3120
1240
17.4
3580
1970
F
219
8
0.27
73.3
193
0.38
105
192
0.47
128
322
0.55
149
320
0.80
218
437
1.04
286
434
1.54
420
664
2.04
556
655
3.15
862
963
4.27
1170
952
4.77
1300
1080
5.26
1440
1080
6.81
1860
1210
9.33
2550
1200
12.6
3450
1400
15.2
4150
1380
17.4
4770
2180
159
11
0.27
101
263
0.38
144
258
0.47
175
359
0.55
205
357
0.80
299
481
1.04
393
476
1.54
579
750
2.04
765
741
3.15
1190
1090
4.27
1610
1080
4.77
1790
1230
5.26
1970
1230
6.81
2560
1380
7.95
2990
1370
12.6
4730
1590
15.2
5700
1570
17.4
6570
2450
V
135
13
0.27
120
265
0.38
171
265
0.47
207
379
0.55
242
375
0.80
353
516
1.04
464
511
1.54
684
750
2.04
903
741
3.15
1400
1140
4.27
1890
1120
4.77
2120
1270
5.23
2330
1260
6.81
3030
1420
7.95
3530
1400
12.6
5600
1650
15.2
6740
1620
17.4
7770
2490
117
15
0.27
138
265
0.38
197
265
0.47
239
379
0.55
279
377
0.80
408
534
1.04
536
529
1.54
788
750
2.04
1040
736
3.15
1620
1200
4.27
2190
1180
4.77
2440
1350
5.23
2680
1340
6.81
3490
1520
7.95
4070
1510
10.4
5360
1700
12.0
6160
1680
16.1
8250
2600
103
17
0.27
155
265
0.38
223
265
0.47
270
397
0.55
318
397
0.80
462
558
1.04
606
551
1.54
894
750
2.04
1190
739
2.67
1550
1210
3.30
1910
1210
4.27
2470
1370
5.23
3050
1350
6.81
3960
1530
7.60
4420
1520
9.76
5670
1830
11.1
6460
1810
13.6
7860
2730
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
83.3
21
0.27
193
265
0.31
225
265
0.43
309
397
0.55
392
397
0.64
461
549
0.74
530
547
1.02
730
750
2.04
1460
732
2.59
1860
1210
3.14
2250
1210
3.65
2630
1460
4.17
3000
1440
5.32
3810
1700
6.55
4700
1670
8.24
5920
1960
10.1
7260
1930
11.6
8340
2930
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.2 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
1750 RPM Frame
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
70.0
25
0.15
127
265
0.22
190
265
0.31
264
397
0.40
337
397
0.46
391
569
0.64
544
562
0.90
769
750
1.16
990
750
1.70
1460
1210
2.24
1920
1210
2.56
2200
1500
2.98
2550
1490
4.15
3540
1790
5.32
4540
1770
6.93
5920
2050
7.99
6820
2030
9.25
7900
3090
H
60.3
29
0.15
146
265
0.22
220
265
0.30
301
397
0.38
380
397
0.46
452
575
0.63
621
573
0.84
832
750
1.05
1040
750
1.62
1610
1210
2.13
2120
1210
2.55
2530
1540
2.98
2950
1530
4.01
3980
1860
5.06
5010
1840
6.01
5960
2160
7.57
7500
2130
7.99
7920
3150
Cyclo® 6000 Series
F
50.0
35
0.15
177
265
0.19
230
265
0.28
339
397
0.37
448
397
0.44
527
575
0.49
595
575
0.82
981
750
1.02
1220
745
1.31
1560
1210
1.61
1920
1210
2.01
2410
1650
2.43
2900
1640
3.34
4010
1980
4.27
5100
1950
4.98
5950
2290
5.70
6820
2270
6.99
8360
3400
40.7
43
0.12
178
265
0.15
223
265
0.23
334
397
0.30
446
397
0.34
493
575
0.40
580
575
0.58
858
750
0.81
1190
750
1.05
1540
1210
1.45
2140
1210
1.74
2570
1710
2.04
2990
1710
2.56
3780
2120
3.19
4700
2100
4.01
5910
2470
5.06
7430
2430
5.29
7780
3550
V
34.3
51
0.13
233
397
0.19
335
397
0.26
450
575
0.32
563
575
0.45
776
750
0.57
990
750
0.75
1310
1210
1.04
1810
1210
1.27
2200
1710
1.49
2600
1710
2.31
4020
2200
3.06
5330
2190
3.41
5950
2580
3.93
6860
2560
4.60
8020
3590
29.7
59
0.13
271
397
0.18
367
397
0.25
500
575
0.31
632
575
0.42
836
750
0.50
1010
750
0.69
1400
1210
0.95
1920
1210
1.15
2330
1710
1.36
2730
1710
1.74
3530
2200
2.17
4380
2200
2.94
5920
2710
3.38
6830
2690
3.97
8010
3590
24.6
71
0.16
391
575
0.25
609
571
0.34
819
750
0.40
981
750
0.59
1410
1210
0.75
1830
1210
0.90
2180
1710
1.02
2470
1710
1.28
3120
2200
1.61
3910
2200
2.46
5960
2890
2.91
7070
2870
3.26
7920
3590
20.1
87
0.12
359
575
0.16
484
575
0.28
843
750
0.40
1210
750
0.58
1730
1210
0.76
2260
1210
0.89
2640
1710
1.02
3030
1710
1.27
3770
2200
1.52
4510
2200
1.91
5660
3130
2.56
7620
3110
2.66
7900
3590
14.7
119
0.17
682
750
0.20
823
750
0.28
1150
1210
0.38
1560
1210
-
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
Speed
Reducers
Selection
Tables
Dimensions:
Size Selection Tables
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Frame Size Selection Tables • SINGLE Reduction 3.3
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1750 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
583
3[1]
20.2
2081
1554
27.2
2798
1702
32.3
3322
1686
37.0
3796
1906
40.4
4141
1906
-
350
5[1]
20.2
3469
1843
27.2
4654
2019
32.3
5530
1998
37.0
6335
2261
40.4
6914
2261
-
292
6
20.3
4170
1960
27.2
5580
2150
32.3
6610
2130
37.0
7600
2400
40.4
8290
2400
-
F
219
8
20.3
5560
2170
26.4
7230
2400
32.3
8850
2360
37.0
10100
2650
40.4
11000
2620
-
159
11
20.3
7650
2430
26.4
9900
2690
32.3
12200
2670
37.0
13900
3040
40.4
15200
3020
47.2
17800
4030
52.3
19600
4010
55.0
20700
5690
64.6
24200
5670
80.1
30100
11000
101
38000
11100
134
50200
11700
V
135
13
20.3
9030
2470
26.4
11800
2800
30.3
13500
2780
36.6
16300
3150
40.4
18000
3130
47.2
21000
4210
52.3
23300
4190
55.0
24400
5910
64.6
28600
5860
-
117
15
20.3
10300
2580
25.1
12900
3000
30.3
15500
2950
34.2
17500
3280
40.4
20700
3240
43.5
22300
4430
52.3
26800
4390
55.0
28200
6170
64.6
33100
6130
80.1
41100
11800
101
51800
11900
134
68400
12600
103
17
16.1
9370
2710
17.6
10200
3150
25.2
14700
3060
26.4
15300
3480
32.3
18700
3440
41.1
23800
4670
52.3
30500
4610
55.0
31900
6530
64.6
37500
6480
-
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
83.3
21
14.8
10500
2890
17.3
12400
3350
21.6
15500
3310
26.2
18700
3750
32.3
23200
3680
40.3
28900
5030
52.3
37600
4940
55.0
39500
7010
64.6
46400
6970
79.5
57000
13200
101
72600
13400
126
91100
14000
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
6195
6205
6215
6225
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.4 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
1750 RPM Frame
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
Input HP
Output Torque in•lbs
Overhung Load (lbs)
70.0
25
10.6
9110
3090
13.2
11300
3550
20.3
17300
3440
21.2
18100
3920
26.2
22400
3860
32.3
27600
5270
40.4
34600
5180
47.2
40400
7360
54.4
46400
7320
-
H
60.3
29
10.1
9980
3150
14.1
14000
3660
15.3
15200
3640
19.2
19000
4140
25.2
25000
4080
26.2
26000
5530
32.3
32000
5490
41.2
40900
7760
50.7
50300
7690
61.3
60700
14400
78.5
77800
14600
101
99800
15300
Cyclo® 6000 Series
F
50.0
35
10.1
12200
3350
13.0
15500
3880
15.3
18300
3840
16.1
19300
4410
20.3
24100
4340
25.2
30200
5910
30.3
36300
5840
32.6
39100
8220
40.4
48400
8160
-
40.7
43
7.23
10600
3510
10.0
14700
4210
10.6
15500
4190
13.1
19200
4720
15.2
22300
4700
20.3
29800
6350
25.2
37200
6260
28.1
41300
8880
40.4
59500
8750
42.7
62800
16300
60.7
89400
16500
75.8
111000
17400
V
34.3
51
5.66
9900
3590
7.72
13500
4410
10.1
17600
4340
11.3
19600
4940
15.2
26500
4850
16.1
28000
6640
20.3
35200
6570
24.4
42500
9280
28.1
49000
9240
-
29.7
59
4.90
9900
3590
5.93
12000
4920
7.72
15500
4870
9.60
19400
5200
11.1
22500
5160
13.1
26400
6970
16.1
32500
6900
20.5
41300
9740
25.2
51000
9680
30.3
61100
17800
50.6
102000
17900
60.7
122000
18900
24.6
71
4.07
9810
3590
4.66
11300
4940
7.58
18400
4830
7.95
19300
5530
9.60
23300
5490
11.8
28600
7410
13.1
31900
7360
18.1
44100
10300
20.9
50800
10300
-
20.1
87
3.33
9900
3590
4.66
13900
4890
5.23
15500
4870
6.46
19200
5950
7.54
22500
5910
9.60
28500
8000
11.5
34200
7960
15.8
47000
11200
18.3
54400
11100
21.3
63500
18900
28.7
85400
20300
35.8
107000
21400
14.7
119
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
Speed
Reducers
Selection
Tables
Dimensions:
Size Selection Tables
6195
6205
6215
6225
Frame Size Selection Tables • SINGLE Reduction 3.5
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1165 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
388
3[1]
3.15
487
781
4.26
655
770
6.80
1053
981
7.15
1106
965
12.6
1938
1120
15.2
2336
1102
17.4
2690
1749
233
5[1]
3.15
814
925
4.26
1097
914
6.80
1752
1165
7.15
1840
1145
12.6
3238
1329
15.2
3893
1309
17.4
4477
2075
194
6
0.27
82.7
193
0.38
119
191
0.47
143
331
0.55
168
331
0.80
245
461
1.04
321
456
1.54
474
677
2.04
627
670
3.15
972
983
4.27
1320
970
4.77
1470
1100
5.26
1620
1100
6.81
2100
1240
9.34
2870
1220
12.6
3890
1410
15.2
4670
1390
17.4
5390
2200
F
146
8
0.27
110
220
0.38
157
218
0.47
191
364
0.55
224
362
0.80
326
496
1.04
429
492
1.54
632
750
2.04
835
739
3.15
1290
1090
4.27
1750
1080
4.77
1950
1230
5.26
2160
1220
6.81
2790
1380
9.15
3760
1350
12.6
5170
1570
14.1
5790
1550
17.4
7180
2450
106
11
0.27
151
265
0.38
217
265
0.47
263
397
0.55
309
397
0.80
449
547
1.04
589
540
1.54
868
750
2.04
1150
750
3.15
1780
1210
4.27
2400
1210
4.77
2690
1390
5.26
2980
1380
6.81
3840
1550
7.93
4480
1540
12.2
6900
1780
14.4
8110
1760
17.4
9900
2730
V
89.6
13
0.27
179
265
0.38
257
265
0.47
311
397
0.55
365
397
0.80
531
575
1.04
696
575
1.54
1020
750
2.04
1350
750
3.15
2110
1210
3.97
2660
1210
4.77
3180
1430
5.23
3500
1420
6.81
4540
1600
7.17
4770
1590
10.3
6900
1880
11.6
7750
1860
16.2
10900
2780
77.7
15
0.27
207
265
0.35
266
265
0.47
358
397
0.55
420
397
0.80
612
575
1.04
804
575
1.54
1190
750
2.04
1560
750
2.87
2210
1210
3.45
2660
1210
4.13
3190
1530
4.83
3720
1520
6.03
4640
1720
7.23
5570
1700
8.97
6900
1930
10.8
8320
1900
14.1
10900
2950
68.5
17
0.24
213
265
0.31
266
265
0.46
398
397
0.55
477
397
0.80
694
575
1.01
885
575
1.52
1330
750
2.03
1770
750
2.54
2210
1210
3.05
2660
1210
3.65
3190
1560
4.26
3720
1540
5.28
4600
1750
6.39
5570
1730
7.91
6900
2080
9.53
8320
2050
12.4
10900
3090
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
55.5
21
0.20
213
265
0.25
266
265
0.37
398
397
0.49
531
397
0.63
683
575
0.63
683
575
1.02
1090
750
1.64
1770
750
2.05
2210
1210
2.46
2660
1210
2.95
3190
1660
3.45
3720
1640
4.28
4620
1940
5.17
5570
1910
6.4
6900
2250
7.64
8230
2200
10.1
10900
3310
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.6 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
1165 RPM
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
46.6
25
0.15
189
265
0.21
266
265
0.31
396
397
0.38
483
397
0.46
586
575
0.64
818
551
0.90
1160
745
1.14
1470
730
1.70
2190
1210
2.07
2660
1210
2.48
3190
1650
2.90
3720
1610
3.62
4640
2040
4.35
5570
2020
5.38
6900
2340
6.20
7960
2310
8.44
10900
3460
H
40.2
29
0.14
213
265
0.18
266
265
0.27
398
397
0.35
528
397
0.46
680
569
0.60
885
516
0.84
1250
743
1.05
1560
728
1.49
2210
1210
1.79
2660
1210
2.13
3190
1620
2.50
3720
1580
3.09
4600
2130
3.74
5570
2110
4.63
6900
2470
5.54
8250
2450
7.28
10900
3550
Cyclo® 6000 Series
F
33.3
35
0.12
213
265
0.15
266
265
0.22
398
397
0.30
531
397
0.33
604
575
0.38
681
575
0.74
1330
741
0.93
1680
723
1.23
2210
1210
1.48
2660
1210
1.77
3190
1640
2.07
3720
1590
2.59
4640
2200
3.1
5570
2200
3.84
6900
2600
4.63
8320
2580
6.03
10900
3590
27.1
43
0.10
213
265
0.12
266
265
0.18
398
397
0.24
531
373
0.32
707
571
0.40
868
531
0.58
1290
745
0.72
1590
732
1.00
2210
1210
1.20
2660
1210
1.45
3190
1710
1.68
3720
1660
2.11
4640
2200
2.52
5570
2200
3.13
6900
2820
3.77
8320
2780
4.91
10900
3590
V
22.8
51
0.13
352
397
0.18
479
366
0.26
675
564
0.32
848
525
0.45
1170
745
0.49
1270
739
0.75
1960
1210
0.94
2460
1210
1.22
3190
1710
1.42
3720
1660
1.77
4640
2200
2.13
5570
2200
2.78
7270
2950
2.90
7580
2950
4.13
10900
3590
19.7
59
0.13
398
397
0.15
468
373
0.23
707
564
0.29
885
518
0.40
1220
745
0.40
1220
745
0.69
2100
1210
0.81
2450
1210
1.05
3190
1710
1.23
3720
1670
1.53
4640
2200
1.84
5570
2200
2.40
7270
3110
2.77
8380
3090
3.58
10900
3590
16.4
71
0.16
587
575
0.19
698
556
0.32
1170
743
0.32
1170
743
0.59
2140
1210
0.60
2200
1210
0.87
3190
1700
1.02
3710
1670
1.28
4640
2200
1.29
4700
2200
2.00
7270
3310
2.30
8380
3280
2.98
10900
3590
13.4
87
0.12
540
575
0.16
727
547
0.28
1270
747
0.30
1340
743
0.50
2210
1210
0.57
2550
1140
0.71
3190
1710
0.83
3720
1660
1.04
4640
2200
1.17
5200
2170
1.62
7270
3310
1.88
8380
3310
2.43
10900
3590
9.79
119
0.16
955
743
0.16
955
743
0.28
1730
1210
0.35
2150
1200
-
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
Speed
Reducers
Selection
Tables
Dimensions:
Frame Size Selection Tables
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Frame Size Selection Tables • SINGLE Reduction 3.7
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1165 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
388
3[1]
18.6
2876
1747
27.0
4159
1888
27.0
4159
1888
37.0
5707
2155
40.4
6229
2138
-
233
5[1]
18.6
4796
2070
27.0
6928
2239
27.0
6928
2239
37.0
9512
2557
40.4
10379
2535
-
194
6
18.7
5760
2200
27.2
8380
2430
32.3
9900
2380
37.0
11400
2710
40.4
12500
2690
-
146
8
17.9
7330
2450
26.4
10900
2690
32.3
13300
2650
37.0
15200
3000
40.4
16700
2980
-
F
106
11
18.5
10400
2710
26.4
14900
3040
32.3
18200
2980
37.0
20900
3400
40.4
22800
3350
47.2
26700
4560
52.3
29500
4540
55.0
31100
6460
64.6
36500
6420
80.1
45200
12400
101
57000
12400
134
75400
13100
152
85700
16400
177
99800
18300
203
114000
22500
235
133000
27300
-
V
89.6
13
18.1
12100
2780
23.2
15500
3200
27.8
18600
3150
33.6
22400
3550
40.4
27000
3460
47.2
31500
4720
52.3
35000
4700
55.0
36700
6680
64.6
43100
6640
-
77.7
15
15.6
12100
2930
20.1
15500
3400
24.2
18600
3350
29.1
22400
3730
34.1
26300
3660
43.5
33400
4960
45.6
35200
4940
55.0
42400
6990
64.6
49700
6920
80.1
61600
13200
101
77900
13300
134
102000
14100
152
117000
17500
177
136000
19500
203
155000
24000
235
181000
29300
-
68.5
17
13.8
12200
3060
17.6
15300
3530
21.3
18600
3480
25.6
22400
3900
31.9
27900
3810
41.1
35800
5270
43.4
37800
5250
55.0
48100
7360
64.6
56300
7280
-
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
55.5
21
10.8
11600
3280
14.4
15500
3810
17.2
18600
3770
20.8
22400
4300
25.9
27900
4210
33.3
35800
5730
41.1
44300
5640
52.3
56400
7960
64.6
69600
7850
73.4
79200
14800
101
109000
14900
121
131000
15700
131
141000
19700
161
174000
21800
203
218000
26500
231
248000
32600
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
6195
6205
6215
6225
6235
6245
6255
6265
6275
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.8 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
1165 RPM
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
46.6
25
9.45
12200
3460
12.1
15500
4010
14.5
18600
3970
17.4
22400
4480
21.7
27900
4410
27.9
35800
5970
34.5
44300
5890
44.0
56400
8360
54.4
69700
8250
-
H
40.2
29
8.15
12200
3530
10.4
15500
4210
12.5
18600
4170
15.0
22400
4740
18.7
27900
4650
24.0
35800
6260
29.7
44300
6190
38.0
56400
8820
47.2
70400
8690
53.2
79200
16200
75.2
112000
16300
89.4
133000
17200
101
150000
21600
126
188000
24000
158
236000
29500
213
318000
35900
213
318000
41900
Cyclo® 6000 Series
F
33.3
35
6.75
12200
3590
8.64
15500
4500
10.3
18600
4450
12.5
22400
5050
15.6
27900
4960
20.0
35800
6750
24.6
44300
6680
31.4
56400
9350
39.2
70400
9240
-
27.1
43
5.30
11700
3570
6.95
15400
4830
8.42
18600
4760
10.1
22400
5420
12.6
27900
5340
16.2
35900
7250
20.0
44300
7170
25.2
55800
10100
30.9
68100
10000
37.3
82300
18300
50.7
112000
18500
64.2
141000
19500
72.9
161000
24300
101
223000
26900
119
264000
33100
152
334000
40300
203
447000
55800
V
22.8
51
4.20
10900
3590
5.93
15500
4960
7.10
18600
4960
8.55
22400
5670
10.6
27900
5600
13.7
35800
7560
16.9
44300
7470
21.6
56400
10600
26.8
70400
10400
-
19.7
59
3.61
10900
3590
5.13
15500
4960
6.13
18600
4960
7.39
22400
5950
9.20
27900
5890
11.8
35800
7940
14.6
44300
7850
18.7
56400
11100
23.2
70400
11000
26.2
79200
18900
36.9
112000
20200
44.7
135000
21300
50.6
153000
26700
75.4
228000
29500
87
264000
36200
126
383000
44300
177
536000
55600
16.4
71
2.98
10900
3590
4.26
15500
4960
5.10
18600
4960
6.15
22400
6330
7.64
27900
6260
9.83
35800
8440
11.0
39900
8400
15.4
56400
11800
19.3
70400
11700
-
13.4
87
2.46
10900
3590
3.48
15500
4960
4.07
18100
4890
5.01
22400
6640
6.24
27900
6640
8.0 3
35900
9130
9.9
44300
9060
12.6
56400
12800
15.7
70400
12700
17.3
77500
18900
22.3
99800
22900
29.8
134000
24000
32.2
143000
30200
43.1
192000
33500
57.6
257000
41000
71.7
320000
49800
71.7
320000
46700
9.79
119
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
Speed
Reducers
Selection
Tables
Dimensions:
Frame Size Selection Tables
6195
6205
6215
6225
6235
6245
6255
6265
6275
Frame Size Selection Tables • SINGLE Reduction 3.9
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 870 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
290
3[1]
3.15
655
853
3.66
752
849
5.82
1203
1073
5.82
1203
1062
11.1
2300
1228
12.2
2522
1217
14.6
3017
1906
174
5[1]
3.15
1088
1013
3.66
1256
1006
5.82
2000
1273
5.82
2000
1260
11.1
3840
1455
12.2
4203
1444
14.6
5035
2261
145
6
0.27
110
211
0.38
158
209
0.47
192
362
0.55
226
359
0.80
328
503
1.04
431
498
1.54
635
739
2.04
838
728
3.15
1300
1080
3.66
1510
1070
4.15
1710
1210
4.15
1710
1210
6.81
2800
1350
7.84
3240
1340
11.2
4600
1550
12.2
5030
1530
15.0
6180
2400
F
109
8
0.27
148
240
0.38
212
227
0.47
256
397
0.49
266
397
0.80
437
545
1.04
575
538
1.54
846
750
2.04
1110
750
3.15
1740
1190
3.41
1870
1190
4.77
2620
1340
5.26
2890
1330
6.81
3740
1500
7.32
4030
1490
11.0
6030
1720
11.3
6210
1720
14.2
7850
2670
79.1
11
0.27
202
265
0.35
266
256
0.47
352
397
0.53
404
397
0.80
601
575
1.04
786
575
1.54
1160
750
1.92
1450
750
2.93
2210
1210
3.50
2660
1210
4.21
3190
1530
4.91
3720
1510
6.15
4640
1700
6.35
4790
1700
9.13
6900
1980
11.0
8320
1950
14.4
10900
3000
V
66.9
13
0.24
213
265
0.30
266
265
0.45
398
397
0.50
446
397
0.79
707
575
0.99
885
575
1.49
1330
750
1.85
1660
750
2.47
2210
1210
2.97
2660
1210
3.57
3190
1590
4.16
3720
1570
5.19
4640
1770
5.73
5120
1760
7.72
6900
2080
9.29
8300
2060
12.1
10900
3060
58.0
15
0.21
213
265
0.26
266
265
0.39
398
397
0.50
510
397
0.69
707
575
0.86
885
575
1.29
1330
750
1.72
1770
750
2.15
2210
1210
2.58
2660
1210
3.09
3190
1700
3.61
3720
1690
4.51
4640
1910
5.41
5570
1890
6.70
6900
2140
8.07
8320
2110
10.5
10900
3220
51.2
17
0.18
213
265
0.23
266
265
0.34
398
397
0.45
531
397
0.61
707
575
0.76
885
575
1.14
1330
750
1.52
1770
750
1.89
2210
1210
2.27
2660
1210
2.72
3190
1710
3.18
3720
1690
3.93
4600
1940
4.77
5570
1920
5.91
6900
2310
7.11
8320
2270
9.28
10900
3370
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
41.4
21
0.15
213
265
0.18
266
265
0.28
398
397
0.37
531
397
0.47
683
575
0.47
683
575
0.92
1330
750
1.23
1770
750
1.53
2210
1210
1.84
2660
1210
2.20
3190
1710
2.58
3720
1680
3.19
4620
2140
3.87
5570
2120
4.78
6900
2470
5.76
8320
2450
7.50
10900
3590
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.10 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
870 RPM
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
34.8
25
0.12
213
265
0.15
266
265
0.23
398
397
0.30
516
397
0.41
707
575
0.52
885
531
0.77
1330
736
0.91
1560
725
1.29
2210
1210
1.54
2660
1210
1.85
3190
1650
2.16
3720
1610
2.70
4640
2200
3.25
5570
2200
4.01
6900
2580
4.63
7960
2580
6.31
10900
3590
H
30.0
29
0.11
213
265
0.13
266
265
0.20
398
397
0.27
531
397
0.36
707
562
0.44
885
516
0.67
1330
739
0.86
1710
721
1.11
2210
1210
1.33
2660
1210
1.60
3190
1620
1.87
3720
1580
2.31
4600
2200
2.79
5570
2200
3.46
6900
2730
4.17
8320
2710
5.44
10900
3590
Cyclo® 6000 Series
F
24.9
35
0.089
213
265
0.11
266
265
0.17
398
397
0.22
531
397
0.276
652
575
0.312
751
545
0.55
1330
741
0.74
1770
719
0.92
2210
1210
1.10
2660
1210
1.32
3190
1640
1.54
3720
1590
1.93
4640
2200
2.32
5570
2200
2.87
6900
2890
3.46
8320
2870
4.51
10900
3590
20.2
43
0.072
213
265
0.090
266
265
0.13
398
397
0.18
531
373
0.24
707
571
0.30
885
527
0.45
1330
743
0.58
1710
725
0.75
2210
1210
0.90
2660
1210
1.08
3190
1710
1.26
3720
1660
1.57
4640
2200
1.88
5570
2200
2.34
6900
3130
2.82
8320
3110
3.66
10900
3590
V
17.1
51
0.11
398
392
0.14
503
355
0.20
707
558
0.25
885
514
0.38
1320
736
0.39
1350
736
0.63
2210
1210
0.75
2630
1190
0.91
3190
1710
1.06
3720
1660
1.32
4640
2200
1.58
5570
2200
2.21
7790
3260
2.31
8120
3240
3.09
10900
3590
14.7
59
0.098
398
397
0.12
502
359
0.17
707
564
0.22
885
518
0.32
1290
741
0.32
1290
741
0.55
2210
1210
0.65
2620
1140
0.79
3190
1710
0.917
3720
1670
1.14
4640
2200
1.37
5570
2200
1.92
7790
3310
2.21
8940
3310
2.67
10900
3590
12.3
71
0.13
652
564
0.16
770
540
0.24
1170
743
0.24
1170
743
0.45
2210
1210
0.48
2330
1210
0.65
3190
1700
0.761
3720
1660
0.952
4640
2200
1.03
5040
2200
1.60
7790
3310
1.84
8940
3310
2.21
10900
3590
10.0
87
0.12
707
551
0.15
885
507
0.22
1330
743
0.24
1430
739
0.37
2210
1210
0.44
2660
1070
0.53
3190
1710
0.621
3720
1660
0.777
4640
2200
0.932
5570
2150
1.26
7500
3310
1.45
8660
3310
1.81
10900
3590
7.31
119
0.12
955
743
0.12
955
743
0.27
2210
1200
0.28
2280
1200
-
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
Speed
Reducers
Selection
Tables
Dimensions:
Frame Size Selection Tables
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Frame Size Selection Tables • SINGLE Reduction 3.11
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 870 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
290
3[1]
14.6
3017
1906
21.9
4512
2068
21.9
4512
2068
37.0
7645
2335
39.8
8229
2317
-
174
5[1]
14.6
5035
2261
21.9
7521
2452
21.9
7521
2452
37.0
12741
2768
39.8
13706
2746
-
145
6
15.0
6180
2400
27.2
11200
2620
28.5
11700
2600
37.0
15300
2950
39.9
16500
2930
-
109
8
14.2
7850
2670
26.4
14500
2930
27.7
15200
2890
37.0
20300
3240
40.4
22200
3200
-
F
79.1
11
14.8
11100
3000
20.5
15500
3350
24.6
18600
3310
29.7
22400
3750
36.9
27900
3660
47.2
35800
4960
52.3
39600
4920
55.0
41600
7050
64.6
48900
6990
80.1
60600
13400
101
76500
13500
134
101000
14200
152
115000
17800
177
134000
19800
203
153000
24300
235
178000
29800
-
V
66.9
13
13.6
12200
3060
17.3
15500
3550
20.8
18600
3480
25.0
22400
3920
31.1
27900
3840
40.1
35900
5180
48.6
43300
5090
55.0
49200
7280
64.6
57700
7190
-
58.0
15
11.7
12100
3200
15.0
15500
3770
18.0
18600
3730
21.7
22400
4170
27.0
27900
4030
34.9
35900
5510
36.5
37600
5490
54.8
56400
7630
60.8
62800
7560
78.3
80800
14400
101
104000
14400
124
128000
15300
152
156000
18900
177
182000
21100
203
209000
26000
235
241000
31700
-
51.2
17
10.4
12200
3350
13.3
15500
3900
15.8
18600
3860
19.2
22400
4370
23.9
27900
4280
30.7
35900
5840
34.6
40500
5780
48.3
56400
8090
60.3
70400
7960
-
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
41.4
21
8.20
11900
3590
10.8
15500
4230
12.9
18600
4190
15.6
22400
4760
19.3
27900
4670
24.8
35800
6330
30.6
44300
6260
39.1
56400
8820
48.7
70400
8690
56.9
82000
16200
76.6
110000
16300
90.7
131000
17200
116
168000
21400
158
228000
23600
191
274000
28700
231
332000
35500
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
6195
6205
6215
6225
6235
6245
6255
6265
6275
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.12 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
870 RPM
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
34.8
25
7.06
12200
3590
9.03
15500
4450
10.8
18600
4410
13.0
22400
4960
16.2
27900
4890
20.8
35800
6640
25.8
44300
6550
32.9
56400
9260
40.9
70400
9150
-
H
30.0
29
6.08
12200
3550
7.79
15500
4670
9.32
18600
4610
11.2
22400
5270
14.0
27900
5160
18.0
35800
6970
22.1
44300
6880
28.3
56400
9740
35.3
70400
9630
40.9
81700
17700
56.1
112000
17900
66.7
133000
18800
83.9
168000
23600
114
228000
26000
144
287000
32000
204
407000
39000
213
425000
45600
Cyclo® 6000 Series
F
24.9
35
5.03
12200
3590
6.46
15500
4960
7.72
18600
4920
9.30
22400
5600
11.6
27900
5530
14.9
35800
7450
18.4
44300
7390
23.5
56400
10300
29.3
70400
10200
-
20.2
43
4.11
12200
3530
5.19
15400
4960
6.28
18600
4960
7.57
22400
5970
9.42
27900
5910
12.1
35900
8050
15.0
44300
7960
19.1
56400
11200
23.9
70400
11100
27.8
82300
18900
37.9
112000
20300
47.9
141000
21400
58.3
173000
26500
77.2
228000
29500
95.4
282000
36200
138
407000
44100
203
598000
55800
V
17.1
51
3.36
11800
3570
4.43
15500
4960
5.3
18600
4960
6.39
22400
6260
7.95
27900
6190
10.2
35800
8360
12.6
44300
8290
16.1
56400
11700
20.1
70400
11600
-
14.7
59
2.89
11700
3590
3.83
15500
4960
4.58
18600
4960
5.52
22400
6610
6.87
27900
6550
8.83
35800
8770
10.9
44300
8690
14.0
56400
12300
17.3
70400
12200
20.3
82300
18900
27.7
112000
22300
34.6
141000
23400
42.4
172000
28900
56.2
228000
32400
69.7
282000
39500
100
407000
48300
149
603000
55800
12.3
71
2.38
11600
3590
3.18
15500
4960
3.81
18600
4960
4.59
22400
6640
5.70
27900
6640
7.34
35800
9350
8.19
39900
9330
11.6
56400
13100
14.5
70400
12900
-
10.0
87
1.85
11000
3590
2.59
15500
4960
3.03
18100
4890
3.74
22400
6640
4.66
27900
6640
6.01
35900
9370
7.4
44300
9370
9.44
56400
13200
11.8
70400
13100
13.0
77500
18900
16.6
99800
23400
22.3
134000
26200
25.4
152000
32800
33.6
200000
36600
45.9
274000
44800
65.1
390000
54500
71.7
429000
50900
7.31
119
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
Speed
Reducers
Selection
Tables
Dimensions:
Frame Size Selection Tables
6195
6205
6215
6225
6235
6245
6255
6265
6275
Frame Size Selection Tables • SINGLE Reduction 3.13
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 580 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
193
3[1]
2.44
752
963
2.44
752
963
4.39
1363
1226
4.39
1363
1226
7.93
2451
1412
8.68
2690
1403
10.0
3097
2155
116
5[1]
2.44
1256
1141
2.44
1256
1141
4.39
2265
1453
4.39
2265
1453
7.93
4088
1675
8.68
4477
1664
10.0
5158
2557
96.7
6
0.27
167
229
0.36
221
215
0.42
263
397
0.42
263
397
0.80
492
571
1.04
646
564
1.54
955
750
1.97
1220
750
2.44
1510
1210
2.44
1510
1210
2.77
1710
1400
2.77
1710
1400
5.23
3240
1550
5.23
3240
1550
7.93
4910
1780
8.68
5370
1770
10.3
6350
2710
F
72.5
8
0.26
213
227
0.29
240
219
0.39
319
397
0.39
319
397
0.80
655
575
1.04
861
575
1.54
1270
750
1.80
1480
750
2.50
2070
1210
2.50
2070
1210
3.87
3190
1520
4.36
3590
1510
5.37
4440
1710
5.37
4440
1710
7.97
6580
1980
8.20
6760
1970
10.5
8640
3020
52.7
11
0.19
213
265
0.23
266
256
0.35
398
397
0.39
444
397
0.62
707
575
0.78
885
575
1.17
1330
750
1.41
1610
750
1.95
2210
1210
2.40
2730
1210
2.81
3190
1710
3.28
3720
1710
4.09
4640
1960
4.66
5280
1950
6.08
6900
2290
7.33
8320
2270
9.56
10900
3370
V
44.6
13
0.16
213
265
0.20
266
265
0.30
398
397
0.37
491
397
0.53
707
575
0.66
885
575
0.99
1330
750
1.32
1770
750
1.65
2210
1210
1.99
2660
1210
2.38
3190
1710
2.78
3720
1710
3.46
4640
2040
4.16
5570
2020
5.15
6900
2400
6.20
8320
2380
8.08
10900
3480
38.7
15
0.14
213
265
0.17
266
265
0.26
398
397
0.34
531
397
0.46
707
575
0.57
885
575
0.86
1330
750
1.14
1770
750
1.44
2210
1210
1.72
2660
1210
2.05
3190
1710
2.40
3720
1710
3.01
4640
2200
3.61
5570
2180
4.46
6900
2470
5.38
8320
2450
7.01
10900
3590
34.1
17
0.12
213
265
0.15
266
265
0.23
398
397
0.30
531
397
0.40
707
575
0.51
885
575
0.76
1330
750
1.01
1770
750
1.26
2210
1210
1.52
2660
1210
1.81
3190
1710
2.12
3720
1690
2.63
4600
2200
3.18
5570
2200
3.93
6900
2650
4.74
8320
2620
6.19
10900
3590
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
27.6
21
0.098
213
265
0.12
266
265
0.18
398
397
0.25
531
397
0.32
683
575
0.32
683
575
0.61
1330
750
0.82
1770
750
1.02
2210
1210
1.23
2660
1210
1.48
3190
1710
1.72
3720
1680
2.13
4620
2200
2.58
5570
2200
3.18
6900
2840
3.84
8320
2820
5.01
10900
3590
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.14 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
580 RPM
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
23.2
25
0.082
213
265
0.10
266
265
0.15
398
397
0.21
531
397
0.28
707
575
0.34
885
531
0.52
1330
736
0.67
1730
717
0.86
2210
1210
1.03
2660
1210
1.24
3190
1650
1.44
3720
1610
1.80
4640
2200
2.16
5570
2200
2.67
6900
3000
3.09
7960
2980
4.20
10900
3590
H
20.0
29
0.071
213
265
0.089
266
265
0.13
398
397
0.18
531
397
0.24
707
562
0.30
885
516
0.44
1330
739
0.59
1770
719
0.74
2210
1210
0.89
2660
1210
1.07
3190
1620
1.24
3720
1580
1.54
4600
2200
1.87
5570
2200
2.31
6900
3150
2.78
8320
3130
3.62
10900
3590
Cyclo® 6000 Series
F
16.6
35
0.059
213
265
0.074
266
265
0.11
398
397
0.15
531
397
0.20
707
575
0.24
860
558
0.37
1330
741
0.49
1770
719
0.61
2210
1210
0.74
2660
1210
0.88
3190
1640
1.03
3720
1590
1.29
4640
2200
1.54
5570
2200
1.91
6900
3310
2.31
8320
3310
3.01
10900
3590
13.5
43
0.048
213
265
0.060
266
265
0.090
398
397
0.12
531
373
0.16
707
571
0.20
885
527
0.30
1330
743
0.40
1770
723
0.50
2210
1210
0.60
2660
1210
0.72
3190
1710
0.84
3720
1660
1.05
4640
2200
1.26
5570
2200
1.56
6900
3310
1.88
8320
3310
2.44
10900
3590
V
11.4
51
0.075
398
392
0.095
503
355
0.13
707
558
0.17
885
514
0.25
1320
736
0.26
1350
736
0.42
2210
1210
0.50
2630
1190
0.61
3190
1710
0.71
3720
1660
0.88
4640
2200
1.06
5570
2200
1.56
8210
3310
1.62
8560
3310
2.07
10900
3590
9.83
59
0.066
398
397
0.083
508
355
0.12
707
564
0.15
885
518
0.21
1290
741
0.21
1290
741
0.36
2210
1210
0.43
2620
1140
0.52
3190
1710
0.61
3720
1670
0.76
4640
2200
0.92
5570
2200
1.33
8070
3310
1.53
9290
3310
1.79
10900
3590
8.17
71
0.097
707
553
0.12
877
509
0.16
1170
743
0.16
1170
743
0.30
2210
1210
0.32
2330
1210
0.44
3190
1700
0.51
3720
1660
0.64
4640
2200
0.72
5230
2200
1.09
7980
3310
1.26
9200
3310
1.48
10900
3590
6.67
87
0.079
707
551
0.098
885
507
0.15
1330
743
0.18
1570
734
0.25
2210
1210
0.30
2660
1070
0.36
3190
1710
0.42
3720
1660
0.52
4640
2200
0.62
5570
2150
0.84
7500
3310
0.97
8660
3310
1.21
10900
3590
4.87
119
0.078
955
743
0.078
955
743
0.18
2210
1200
0.19
2280
1200
-
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
Speed
Reducers
Selection
Tables
Dimensions:
Frame Size Selection Tables
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Frame Size Selection Tables • SINGLE Reduction 3.15
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 580 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
193
3[1]
10.0
3097
2155
16.5
5114
2405
16.5
5114
2405
26.6
8229
2690
26.6
8229
2690
-
116
5[1]
10.0
5158
2557
16.5
8521
2852
16.5
8521
2852
26.6
13706
3191
26.6
13706
3191
-
96.7
6
10.3
6350
2710
18.9
11700
3040
18.9
11700
3040
26.6
16500
3400
26.6
16500
3400
-
72.5
8
10.5
8640
3020
18.8
15500
3370
20.0
16600
3350
27.1
22400
3700
27.9
23000
3700
-
F
52.7
11
10.1
11400
3370
13.7
15500
3880
16.4
18600
3810
19.7
22400
4340
24.6
27900
4250
31.7
35900
5750
37.4
42500
5670
49.8
56400
7980
59.1
67000
7890
62.8
71300
15100
85.9
97200
15100
100
114000
16000
134
152000
20000
157
179000
22300
203
229000
27100
235
266000
33300
-
V
44.6
13
9.05
12200
3460
11.6
15500
4100
13.8
18600
4030
16.6
22400
4560
20.8
27900
4480
26.8
35900
6000
32.3
43300
5930
42.1
56400
8330
48.5
65000
8250
-
38.7
15
7.77
12100
3590
10.0
15500
4370
12.0
18600
4320
14.5
22400
4810
18.0
27900
4720
23.2
35900
6350
26.7
41300
6280
36.5
56400
8800
44.6
69000
8660
53.0
82000
16300
69.7
108000
16300
82.8
128000
17300
112
174000
21400
150
232000
23800
179
276000
29300
235
363000
35500
-
34.1
17
6.91
12200
3590
8.86
15500
4520
10.6
18600
4480
12.8
22400
5030
15.8
27900
4940
20.5
35900
6750
25.2
44300
6660
32.2
56400
9330
40.1
70400
9220
-
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
27.6
21
5.46
11900
3590
7.17
15500
4870
8.58
18600
4830
10.3
22400
5490
12.9
27900
5420
16.5
35800
7320
20.4
44300
7230
26
56400
10100
32.5
70400
10000
37.9
82000
18300
51.1
110000
18500
60.5
131000
19500
77.2
168000
24300
105
228000
26700
127
274000
32800
188
407000
39700
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
6195
6205
6215
6225
6235
6245
6255
6265
6275
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.16 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
580 RPM Frame
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
23.2
25
4.70
12200
3590
6.03
15500
4960
7.21
18600
4960
8.68
22400
5710
10.8
27900
5640
14.0
35800
7650
17.2
44300
7560
21.9
56400
10600
27.4
70400
10500
-
H
20.0
29
4.05
12200
3550
5.19
15500
4960
6.21
18600
4960
7.49
22400
6040
9.32
27900
5970
12.0
35800
8020
14.8
44300
7940
18.9
56400
11200
23.5
70400
11100
27.2
81700
18900
37.4
112000
20300
44.6
133000
21400
56.0
168000
26700
76.4
228000
29500
96.1
287000
36200
136
407000
44300
201
603000
51100
Cyclo® 6000 Series
F
16.6
35
3.36
12200
3590
4.31
15500
4960
5.15
18600
4960
6.20
22400
6460
7.72
27900
6390
9.93
35800
8580
12.3
44300
8510
15.7
56400
11900
19.5
70400
11800
-
13.5
43
2.74
12200
3530
3.46
15400
4960
4.19
18600
4960
5.05
22400
6640
6.28
27900
6640
8.09
35900
9260
9.97
44300
9170
12.7
56400
12900
15.8
70400
12700
18.5
82300
18900
25.2
112000
22900
31.9
141000
24300
40.9
181000
30000
51.5
228000
33500
68.9
306000
41000
91.8
407000
49800
136
603000
55800
V
11.4
51
2.31
12200
3530
2.95
15500
4960
3.53
18600
4960
4.26
22400
6640
5.30
27900
6640
6.82
35800
9370
8.42
44300
9370
10.7
56400
13200
13.4
70400
13100
-
9.83
59
1.99
12200
3590
2.55
15500
4960
3.06
18600
4960
3.68
22400
6640
4.58
27900
6640
5.89
35800
9370
7.28
44300
9350
9.28
56400
13200
11.6
70400
13100
13.6
82300
18900
18.4
112000
23400
23.1
141000
26500
29.8
181000
32800
37.6
228000
36600
50.2
306000
45000
66.8
407000
54700
99.2
603000
55800
8.17
71
1.60
11700
3590
2.12
15500
4960
2.54
18600
4960
3.06
22400
6640
3.81
27900
6640
4.90
35800
9370
5.45
39900
9370
7.70
56400
13100
9.62
70400
13000
-
6.67
87
1.23
11000
3590
1.73
15500
4960
2.03
18100
4890
2.50
22400
6640
3.10
27900
6640
4.00
35900
9370
4.93
44300
9370
6.30
56400
13200
7.85
70400
13100
8.63
77500
18900
11.1
99800
23400
14.9
134000
30000
16.9
152000
37300
22.3
200000
41700
30.6
274000
50700
43.4
390000
61500
67.2
603000
55100
4.87
119
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
Speed
Reducers
Selection
Tables
Dimensions:
Size Selection Tables
6195
6205
6215
6225
6235
6245
6255
6265
6275
Frame Size Selection Tables • SINGLE Reduction 3.17
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 50 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
16.7
3[1]
761
963
761
963
1619
1749
1619
1749
2460
2620
2690
2620
3176
2852
10.0
5[1]
1265
1141
1265
1141
2699
2072
2699
2072
4097
3105
4477
3105
5291
3381
8.33
6
213
218
221
215
263
397
263
397
694
575
694
575
1260
750
1500
750
1510
1210
1510
1210
1710
1710
1710
1710
3240
2200
3240
2200
4910
3310
5370
3310
6350
3590
6.25
8
213
227
240
219
386
397
386
397
707
575
877
575
1330
750
1480
750
2210
1210
2440
1210
3190
1710
3590
1710
4640
2200
5080
2200
6580
3310
6760
3310
10200
3590
F
4.55
11
213
265
266
256
398
397
450
397
707
575
885
575
1330
750
1770
750
2210
1210
2730
1210
3190
1710
3720
1710
4640
2200
5500
2200
6900
3310
8320
3310
10900
3590
V
3.85
13
213
265
266
265
398
397
531
397
707
575
885
575
1330
750
1770
750
2210
1210
2660
1210
3190
1710
3720
1710
4640
2200
5570
2200
6900
3310
8320
3310
10900
3590
3.33
15
213
265
266
265
398
397
531
397
707
575
885
575
1330
750
1770
750
2210
1210
2660
1210
3190
1710
3720
1710
4640
2200
5570
2200
6900
3310
8320
3310
10900
3590
2.94
17
213
265
266
265
398
397
531
397
707
575
885
575
1330
750
1770
750
2210
1210
2660
1210
3190
1710
3720
1690
4600
2200
5570
2200
6900
3310
8320
3310
10900
3590
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
2.38
21
213
265
266
265
398
397
531
397
683
575
683
575
1330
750
1770
750
2210
1210
2660
1210
3190
1710
3720
1680
4620
2200
5570
2200
6900
3310
8320
3310
10900
3590
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.18 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
50 RPM Frame
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
2.00
25
213
265
266
265
398
397
531
397
707
575
885
531
1330
736
1770
714
2210
1210
2660
1210
3190
1650
3720
1610
4640
2200
5570
2200
6900
3310
7960
3310
10900
3590
H
1.72
29
213
265
266
265
398
397
531
397
707
562
885
516
1330
739
1770
719
2210
1210
2660
1210
3190
1620
3720
1580
4600
2200
5570
2200
6900
3310
8320
3310
10900
3590
Cyclo® 6000 Series
F
1.43
35
213
265
266
265
398
397
531
397
707
575
885
545
1330
741
1770
719
2210
1210
2660
1210
3190
1640
3720
1590
4640
2200
5570
2200
6900
3310
8320
3310
10900
3590
1.16
43
213
265
266
265
398
397
531
373
707
571
885
527
1330
743
1770
723
2210
1210
2660
1210
3190
1710
3720
1660
4640
2200
5570
2200
6900
3310
8320
3310
10900
3590
V
0.980
51
398
392
503
355
707
558
885
514
1320
736
1350
736
2210
1210
2630
1190
3190
1710
3720
1660
4640
2200
5570
2200
8210
3310
8560
3310
10900
3590
0.847
59
398
397
508
355
707
564
885
518
1290
741
1290
741
2210
1210
2620
1140
3190
1710
3720
1670
4640
2200
5570
2200
8070
3310
9290
3310
10900
3590
0.704
71
707
553
885
507
1170
743
1170
743
2210
1210
2330
1210
3190
1700
3720
1660
4640
2200
5230
2200
7980
3310
9200
3310
10900
3590
0.575
87
707
551
885
507
1330
743
1730
725
2210
1210
2660
1070
3190
1710
3720
1660
4640
2200
5570
2150
7500
3310
8660
3310
10900
3590
0.420
119
955
743
955
743
2210
1200
2280
1200
-
FRAME SIZE
6060
6065
6070
6075
6080
6085
6090
6095
Speed
Reducers
Selection
Tables
Dimensions:
Size Selection Tables
6100
6105
610H
6110
6115
6120
6125
612H
6130
6135
6140
Frame Size Selection Tables • SINGLE Reduction 3.19
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 50 RPM
Single Reduction, Ratios 3-21
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
16.7
3[1]
3176
2852
5840
3938
5840
3938
8229
5256
8229
5256
-
10.0
5[1]
5291
3381
6955
4670
6955
4670
9910
6233
9910
6233
-
8.33
6
6350
3590
11700
4960
11700
4960
16500
6640
16500
6640
-
6.25
8
10200
3590
15500
4960
16600
4960
22400
6640
23000
6640
-
F
4.55
11
11400
3590
15500
4960
18600
4960
22400
6640
27900
6640
35900
9370
42500
9370
56400
13200
67100
13200
76300
18900
101000
23400
120000
32600
166000
40100
181000
46700
243000
57800
277000
61900
-
V
3.85
13
12200
3570
15500
4960
18600
4960
22400
6640
27900
6640
35900
9370
43300
9370
56400
13200
67500
13100
-
3.33
15
12100
3590
15500
4960
18600
4960
22400
6640
27900
6640
35900
9370
43600
9370
56400
13200
70000
13100
82000
18900
108000
23400
128000
32600
174000
40100
232000
46700
276000
58000
386000
61900
-
2.94
17
12200
3590
15500
4960
18600
4960
22400
6640
27900
6640
35900
9370
44300
9370
56400
13200
70400
13200
-
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
2.38
21
11900
3590
15500
4960
18600
4960
22400
6640
27900
6640
35800
9370
44300
9370
56400
13200
70400
13200
82000
18900
110000
23400
131000
32600
168000
40100
228000
46700
274000
58000
407000
61900
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
6195
6205
6215
6225
6235
6245
6255
6265
6275
Note: [1] Ratings listed are for the horizontal mounting position; please contact factory for vertical mounting position ratings.
3.20 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
50 RPM
Single Reduction, Ratios 25-119
H, F, V Housing Styles
Pages
Foot Mount (H) 4.2–4.19
F-Flange
(F) 4.36–4.46
V-Flange
(V) 4.62–4.80
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
2.00
25
12200
3590
15500
4960
18600
4960
22400
6640
27900
6640
35800
9370
44300
9370
56400
13200
70400
13200
-
H
1.72
29
12200
3550
15500
4960
18600
4960
22400
6640
27900
6640
35800
9370
44300
9370
56400
13200
70400
13200
81700
18900
112000
23400
133000
32600
168000
40100
228000
46700
287000
58000
407000
61900
603000
55800
Cyclo® 6000 Series
F
1.43
35
12200
3590
15500
4960
18600
4960
22400
6640
27900
6640
35800
9370
44300
9370
56400
13200
70400
13200
-
1.16
43
12200
3530
15400
4960
18600
4960
22400
6640
27900
6640
35900
9370
44300
9370
56400
13200
70400
13200
82300
18900
112000
23400
141000
32600
181000
40100
228000
46700
306000
58000
407000
61900
603000
55800
V
0.980
51
12200
3530
15500
4960
18600
4960
22400
6640
27900
6640
35800
9370
44300
9370
56400
13200
70400
13100
-
0.847
59
12200
3590
15500
4960
18600
4960
22400
6640
27900
6640
35800
9370
44300
9350
56400
13200
70400
13100
82300
18900
112000
23400
141000
32600
181000
40100
228000
46700
306000
58000
407000
61900
603000
55800
0.704
71
11700
3590
15500
4960
18600
4960
22400
6640
27900
6640
35800
9370
39900
9370
56400
13100
70400
13000
-
0.575
87
11000
3590
15500
4960
18100
4890
22400
6640
27900
6640
35900
9370
44300
9370
56400
13200
70400
13100
77500
18900
99800
23400
134000
32600
152000
40100
200000
46700
274000
58000
390000
61900
603000
55100
0.420
119
-
FRAME SIZE
6145
614H
6160
6165
616H
6170
6175
6180
6185
6190
Speed
Reducers
Selection
Tables
Dimensions:
Frame Size Selection Tables
6195
6205
6215
6225
6235
6245
6255
6265
6275
Frame Size Selection Tables • SINGLE Reduction 3.21
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Selection
Tables
Speed
Reducers
3.22 Frame Size Selection Tables • SINGLE Reduction
Cyclo® 6000 Series
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.23
CYCLO® 6000 Speed Reducers
Selection Tables
Double Reduction
Selection
Tables
Speed
Reducers
Single Reduction see page 3.2
Cyclo® 6000 Series
Frame Size Selection Tables • DOUBLE Reduction 3.23
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.24
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1750 RPM
Double Reduction, Ratios 104-731
H, F, V Housing Styles
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
16.8
104
0.13
213
265
0.13
266
265
0.13
398
397
0.16
531
397
0.40
1330
750
0.48
1600
750
0.58
1940
1210
0.58
1940
1210
1.38
4640
2200
1.65
5570
2200
2.05
6900
3310
2.05
6900
3310
2.15
7230
3310
2.47
8320
3310
2.15
6880
3590
3.22
10900
3590
NOTE: Motor HP in GRAY is to overcome breakaway
torque requirements in cold temperatures or high
inertia applications. A torque limiting device is
recommended to protect the unit or driven machine.
Dimensions:
F
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
V
14.5
12.2
10.6
8.97
7.58
6.41
5.49
4.64
3.70
3.13
2.70
2.39
121
143
165
195
231
273
319
377
473
559
649
731
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
213
213
213
213
213
213
213
213
213
213
213
265
265
265
265
265
265
265
265
265
265
265
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
266
266
266
266
266
266
266
266
266
266
266
256
265
265
265
265
265
265
265
265
265
265
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
398
398
398
398
398
398
398
398
398
398
398
398
397
397
397
397
397
397
397
397
397
397
397
397
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
450
531
531
531
531
531
531
531
531
531
508
531
397
397
397
397
397
397
397
397
373
373
355
373
0.34
0.29
0.25
0.21
0.18
0.15
0.13
0.13
0.13
0.13
0.13
0.13
1330 1330 1330 1330 1330 1330 1330 1330 1330 1330 1290 1330
750
750
750
750
750
750
741
741
745
745
741
745
0.36
0.35
0.33
0.28
0.24
0.20
0.17
0.15
0.13
0.13
0.13
1420 1620 1770 1770 1770 1770 1770 1770 1770 1770
1770
750
750
750
750
750
750
719
719
723
723
723
0.57
0.48
0.41
0.35
0.30
0.25
0.22
0.18
0.15
0.13
0.13
0.13
2210 2210 2210 2210 2210 2210 2210 2210 2210 2210 2210 2210
1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210
0.58
0.57
0.50
0.42
0.35
0.30
0.26
0.22
0.17
0.15
0.13
0.13
2260 2660 2660 2660 2660 2660 2660 2660 2660 2660 2620 2660
1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1140 1210
1.19
1.00
0.87
0.74
0.62
0.52
0.45
0.38
0.30
0.26
0.22
0.20
4640 4640 4640 4640 4620 4620 4600 4600 4640 4640 4640 4640
2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200
1.41
1.20
1.04
0.88
0.75
0.63
0.54
0.46
0.36
0.31
0.27
0.24
5500 5570 5570 5570 5570 5570 5570 5570 5570 5570 5570 5570
2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200
0.58
0.58
0.57
0.45
0.38
0.38
0.29
5100 5950 6900 6900 6900 8070 6900
3310 3310 3310 3310 3310 3310 3310
1.76
1.49
1.29
1.09
0.92
0.78
0.67
0.57
0.45
0.38
0.38
0.29
6900 6900 6900 6900 6900 6900 6900 6900 6900 6900 8070 6900
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
1.76
1.49
1.29
1.09
0.92
0.78
0.67
0.57
0.45
0.38
0.38
0.29
6900 6900 6900 6900 6900 6900 6900 6900 6900 6900 8070 6900
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.58
0.58
0.54
0.46
0.44
0.35
5950 7040 8320 8320 9290 8320
3310 3310 3310 3310 3310 3310
2.12
1.80
1.56
1.32
1.11
0.94
0.81
0.68
0.54
0.46
0.44
0.35
8320 8320 8320 8320 8320 8320 8320 8320 8320 8320 9290 8320
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
2.12
1.80
1.56
1.32
1.11
0.94
0.81
0.68
0.54
0.46
0.44
0.35
8320 8320 8320 8320 8320 8320 8320 8320 8320 8320 9290 8320
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.58
0.58
0.58
0.52
0.46
7040 8850 10400 10900 10900
3590 3590 3590 3590 3590
2.15
2.15
2.03
1.72
1.45
1.23
1.05
0.89
0.71
0.60
0.52
0.46
7980 9480 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
2.77
2.34
2.03
1.72
1.45
1.23
1.05
0.89
0.71
0.60
0.52
0.46
10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
3.24 Frame Size Selection Tables • DOUBLE Reduction
FRAME SIZE
6060DA
6065DA
6070DA
6075DA
6090DA
6095DA
6100DA
6105DA
6120DB
6125DB
6130DA
6130DB
6130DC
6135DA
6135DB
6135DC
6140DA
6140DB
6140DC
Cyclo® 6000 Series
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.25
CYCLO® 6000 Speed Reducers
Dimensions:
1750 RPM Frame
Double Reduction, Ratios 841-7569
H, F, V Housing Styles
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
H
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
2.08
841
0.13
213
265
0.13
266
265
0.13
398
397
0.13
531
397
0.13
1330
741
0.13
1770
719
0.13
2210
1210
0.13
2660
1210
0.17
4600
2200
0.21
5570
2200
0.27
6900
3310
0.27
6900
3310
0.27
6900
3310
0.31
8320
3310
0.31
8320
3310
0.31
8320
3310
0.40
10900
3590
0.40
10900
3590
0.40
10900
3590
Size Selection Tables
F
V
1.74
1.40
1.18 0.946 0.847 0.690 0.575 0.503 0.394 0.341 0.283 0.231
1003 1247 1479 1849 2065 2537 3045 3481 4437 5133 6177 7569
0.13
0.13
213
213
265
265
0.13
0.13
266
266
265
265
0.13
0.13
0.13
0.13
0.13
398
398
398
398
398
397
397
397
397
397
0.13
0.13
0.13
0.13
0.13
508
531
531
508
508
355
373
373
355
355
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
1290 1330 1330 1330 1290 1290 1330 1290 1330 1330
741
745
745
745
741
741
745
741
745
745
0.13
0.13
0.13
0.13
0.13
0.13
1770 1700 1770
1700
1700 1700
723
728
723
728
728
728
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
2210 2210 2210 2210 2210 2210 2210 2210 2210 2210
1210 1210 1210 1210 1210 1210 1210 1210 1210 1210
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
2620 2660 2660 2660 2620 2620 2660 2620 2660 2660
1140 1210 1080 1210 1140 1140 1080 1140 1080 1080
0.14
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
4640 4640 4640 4640 4640 4640 4640 4640 4640 4640 4640 4640
2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200
0.17
0.14
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
5570 5570 5570 5570 5570 5570 5570 5570 5570 5570 5570 5570
2200 2200 2150 2200 2200 2200 2150 2200 2150 2150 2150 2150
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
8070 6900 7510 6900 8070 8070 7510 8070 7510 7510
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
8070 6900 7510 6900 8070 8070 7510 8070 7510 7510 7510 7510
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
8070 6900 7510 6900 8070 8070 7510 8070 7510 7510 7510 7510
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.29
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
9290 8320 8660 8320 9290 9290 8660 9290 8660 8660
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.29
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
9290 8320 8660 8320 9290 9290 8660 9290 8660 8660 8660 8660
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.29
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
9290 8320 8660 8320 9290 9290 8660 9290 8660 8660 8660 8660
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.33
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
0.33
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
0.33
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
Cyclo® 6000 Series
FRAME SIZE
6060DA
6065DA
6070DA
6075DA
6090DA
6095DA
6100DA
Speed
Reducers
6105DA
6120DB
Selection
Tables
NOTE: Motor HP in GRAY is to overcome breakaway
torque requirements in cold temperatures or high inertia
applications. A torque limiting device is
recommended to protect the unit or driven machine.
6125DB
6130DA
6130DB
6130DC
6135DA
6135DB
6135DC
6140DA
6140DB
6140DC
Frame Size Selection Tables • DOUBLE Reduction 3.25
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.26
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1750 RPM
Double Reduction, Ratios 104-731
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
16.8
14.5
104
121
3.60
2.91
12200 11500
3570
3590
4.62
3.96
15500 15500
4960
4960
5.52
4.74
18600 18600
4960
4960
6.64
5.72
22400 22400
6440
6640
8.28
7.11
27900 27900
6350
6640
10.7
9.17
35900 35900
8470
9040
12.9
10.9
43400 42500
8380
8970
16.0
14.4
53900 56400
11800 12600
16.0
16.0
53900 62800
11800 12500
16.0
62800
18900
25.6
101000
22700
30.3
119000
23800
12.2
143
2.15
9900
3590
2.62
12200
3570
3.36
15500
4960
4.01
18600
4960
4.83
22400
6640
6.03
27900
6640
7.76
35900
9370
9.37
43400
9370
8.39
38800
13200
12.2
56400
13100
14.6
67500
13000
-
3.26 Frame Size Selection Tables • DOUBLE Reduction
10.6
165
2.15
11500
3590
2.26
12000
3590
2.91
15500
4960
3.48
18600
4960
4.19
22400
6640
5.22
27900
6640
6.72
35900
9370
8.15
43600
9370
8.39
44800
13200
10.6
56400
13200
13.1
70000
13100
15.3
82000
18900
16.0
85500
23400
20.1
108000
23400
24.0
128000
26000
8.97
195
1.91
12000
3590
1.91
12000
3590
2.46
15500
4960
2.94
18600
4960
3.54
22400
6640
4.42
27900
6640
5.69
35900
9370
6.90
43600
9370
8.39
52900
13200
8.94
56400
13200
8.39
52900
13200
11.1
70000
13100
13.0
82000
18900
16.0
95800
23400
17.0
108000
23400
16.0
101000
27600
20.3
128000
27300
NOTE: Motor HP in GRAY is to overcome breakaway
torque requirements in cold temperatures or high
inertia applications. A torque limiting device is
recommended to protect the unit or driven machine.
F
7.58
231
1.58
11800
3590
1.58
11800
3590
2.08
15500
4960
2.48
18600
4960
2.99
22400
6640
3.73
27900
6640
4.79
35800
9370
5.92
44300
9370
7.54
56400
13200
7.54
56400
13200
8.39
62800
13200
9.42
70400
13200
11.0
82000
18900
14.8
110000
23400
16.0
120000
29100
17.4
131000
29100
6.41
273
1.34
11800
3590
1.34
11800
3590
1.76
15500
4960
2.11
18600
4960
2.54
22400
6640
3.15
27900
6640
4.05
35800
9370
5.01
44300
9370
6.39
56400
13200
7.97
70400
13200
7.97
70400
13200
7.87
69500
18900
9.29
82000
18900
12.5
110000
23400
14.8
131000
30600
-
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
V
5.49
319
1.17
12200
3550
1.17
12200
3550
1.50
15500
4960
1.80
18600
4960
2.16
22400
6640
2.70
27900
6640
3.48
35800
9370
4.28
44300
9370
5.46
56400
13200
6.82
70400
13200
6.50
67100
18900
7.91
81700
18900
10.8
112000
23400
12.9
133000
32000
-
4.64
377
0.99
12200
3550
0.993
12200
3550
1.27
15500
4960
1.52
18600
4960
1.84
22400
6640
2.28
27900
6640
2.94
35800
9370
3.62
44300
9370
4.63
56400
13200
5.77
70400
13200
5.83
71100
18900
6.70
81700
18900
9.17
112000
23400
10.9
133000
32600
-
3.70
473
0.79
12200
3530
0.792
12200
3530
1.00
15400
4960
1.21
18600
4960
1.46
22400
6640
1.83
27900
6640
2.35
35900
9370
2.89
44300
9370
3.69
56400
13200
4.60
70400
13200
4.50
68800
18900
5.37
82300
18900
7.32
112000
23400
9.25
141000
32600
-
3.13
559
0.58
10400
3590
0.67
12200
3530
0.670
12200
3530
0.85
15400
4960
1.03
18600
4960
1.24
22400
6640
1.54
27900
6640
1.99
35900
9370
2.44
44300
9370
3.11
56400
13200
3.89
70400
13200
4.03
72800
18900
4.55
82300
18900
6.19
112000
23400
7.83
141000
32600
-
2.70
649
0.58
12200
3590
0.58
12200
3590
0.577
12200
3590
0.74
15500
4960
0.88
18600
4960
1.07
22400
6640
1.33
27900
6640
1.70
35800
9370
2.11
44300
9350
2.68
56400
13200
3.36
70400
13100
3.28
68900
18900
3.92
82300
18900
5.33
112000
23400
6.68
141000
32600
-
2.39
731
0.51
12200
3530
0.51
12200
3530
0.513
12200
3530
0.65
15400
4960
0.79
18600
4960
0.95
22400
6640
1.18
27900
6640
1.52
35900
9370
1.87
44300
9370
2.39
56400
13200
2.98
70400
13200
3.38
80100
18900
3.48
82300
18900
4.72
112000
23400
5.99
141000
32600
-
FRAME SIZE
6145DA
6145DB
6145DC
6160DC
6165DC
6170DC
6175DC
6180DB
6185DB
6190DA
6190DB
6195DA
6195DB
6205DA
6205DB
6215DA
6215DB
6225DA
6225DB
Cyclo® 6000 Series
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.27
CYCLO® 6000 Speed Reducers
NOTE: Motor HP in GRAY is to overcome breakaway
torque requirements in cold temperatures or high inertia applications. A torque limiting device is
recommended to protect the unit or driven machine.
Double Reduction, Ratios 841-7569
H, F, V Housing Styles
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
H
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
2.08
841
0.41
11000
3590
0.45
12200
3550
0.45
12200
3550
0.57
15500
4960
0.68
18600
4960
0.82
22400
6640
1.02
27900
6640
1.32
35800
9370
1.62
44300
9370
2.07
56400
13200
2.59
70400
13200
2.99
81700
18900
4.11
112000
23400
4.89
133000
32600
-
1.74
1003
0.37
12200
3590
0.37
12200
3590
0.37
12200
3590
0.54
15500
4960
0.57
18600
4960
0.69
22400
6640
0.86
27900
6640
1.10
35800
9370
1.36
44300
9350
1.74
56400
13200
2.17
70400
13100
2.95
80100
18900
2.95
82300
18900
3.45
112000
23400
4.32
141000
32600
-
Size Selection Tables
1.40
1247
0.30
12200
3530
0.30
12200
3530
0.30
12200
3530
0.54
15400
4960
0.54
18600
4960
0.55
22400
6640
0.69
27900
6640
1.01
35900
9370
1.10
44300
9370
1.40
56400
13200
1.74
70400
13200
2.95
82300
18900
2.95
112000
23400
3.50
141000
32600
-
Cyclo® 6000 Series
1.18
1479
0.27
11000
3590
0.27
11000
3590
0.27
11000
3590
0.54
15500
4960
0.54
18100
4890
0.54
22400
6640
0.58
27900
6640
1.01
35900
9370
1.01
44300
9370
1.18
56400
13200
1.48
70400
13100
2.01
74000
18900
2.01
77500
18900
2.08
99800
23400
2.95
134000
32600
-
F
0.946
1849
0.27
12200
3530
0.27
12200
3530
0.27
12200
3530
0.27
15400
4960
0.54
18600
4960
0.54
22400
6640
0.54
27900
6640
0.60
35900
9370
1.01
44300
9370
1.01
56400
13200
1.18
70400
13200
2.01
82300
18900
2.01
112000
23400
2.36
141000
32600
-
V
0.847
2065
0.27
12200
3590
0.27
12200
3590
0.27
12200
3590
0.27
15500
4960
0.28
18600
4960
0.54
22400
6640
0.54
27900
6640
0.54
35800
9370
1.01
44300
9350
1.01
56400
13200
1.05
70400
13100
2.01
82300
18900
2.01
112000
23400
2.11
141000
32600
-
0.690
2537
0.27
12200
3590
0.27
12200
3590
0.27
12200
3590
0.27
15500
4960
0.27
18600
4960
0.27
22400
6640
0.54
27900
6640
0.54
35800
9370
0.54
44300
9350
1.01
56400
13200
1.01
70400
13100
1.01
82300
18900
2.01
112000
23400
2.01
141000
32600
-
0.575
3045
0.27
11000
3590
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.28
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
77500
18900
2.01
99800
23400
2.01
134000
32600
-
0.503
3481
0.27
12200
3590
0.27
12200
3590
0.27
12200
3590
0.27
15500
4960
0.27
18600
4960
0.27
22400
6640
0.27
27900
6640
0.54
35800
9370
0.54
44300
9350
1.01
56400
13200
1.01
70400
13100
1.01
82300
18900
2.01
112000
23400
2.01
141000
32600
-
0.394
4437
0.27
11000
3590
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
77500
18900
2.01
99800
23400
2.01
134000
32600
-
0.341
5133
0.27
11000
3590
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
82300
18900
2.01
112000
23400
2.01
141000
32600
-
0.283
6177
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
77500
18900
2.01
99800
23400
2.01
134000
32600
-
0.231
7569
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
77500
18900
2.01
99800
23400
2.01
134000
32600
-
FRAME SIZE
6145DA
6145DB
6145DC
6160DC
6165DC
6170DC
6175DC
Speed
Reducers
6180DB
6185DB
6190DA
6190DB
6195DA
6195DB
6205DA
6205DB
6215DA
6215DB
6225DA
6225DB
Frame Size Selection Tables • DOUBLE Reduction 3.27
Selection
Tables
Dimensions:
1750 RPM Frame
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.28
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1750 RPM
Double Reduction, Ratios 104-731
H, V, F Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
16.8
104
-
14.5
12.2
121
143
34.1
134000
30000
42.3
166000
29800
46.4
181000
33100
42.7
168000
40800
62.1
243000
40600
68.2
267000
49600
-
3.28 Frame Size Selection Tables • DOUBLE Reduction
10.6
165
32.5
174000
32000
32.5
174000
32000
34.1
182000
35900
43.5
233000
35500
42.7
228000
43900
51.5
276000
43700
68.2
364000
53100
-
8.97
195
27.5
174000
33700
32.1
202000
37700
36.8
233000
37500
42.7
270000
45900
43.6
276000
45900
61.3
387000
55800
-
F
7.58
231
22.4
168000
36400
30.5
228000
40100
30.5
228000
40100
36.6
274000
48900
54.4
407000
59500
-
6.41
273
18.9
168000
38100
25.8
228000
42300
31.0
274000
51600
46.0
407000
61900
-
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
V
5.49
319
16.2
168000
39900
22.1
228000
44100
27.8
287000
54200
39.5
407000
61900
58.4
603000
55800
4.64
377
13.7
168000
40100
18.7
228000
46500
23.5
287000
57100
33.3
407000
61900
49.4
603000
55800
3.70
473
11.8
181000
40100
14.9
228000
46700
20.0
306000
58000
26.6
407000
61900
39.5
603000
55800
3.13
559
10.0
181000
40100
12.6
228000
46700
16.9
306000
58000
22.6
407000
61900
33.3
603000
55800
2.70
649
8.63
181000
40100
10.9
228000
46700
14.5
306000
58000
19.3
407000
61900
28.7
603000
55800
2.39
731
7.66
181000
40100
9.65
228000
46700
12.9
306000
58000
17.2
407000
61900
25.5
603000
55800
FRAME SIZE
6235DA
6235DB
6245DA
6245DB
6255DA
6255DB
6265DA
6275DA
Cyclo® 6000 Series
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.29
CYCLO® 6000 Speed Reducers
1750 RPM
Double Reduction, Ratios 841-7569
H, V, F Housing Styles
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
H
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
2.08
841
6.15
168000
40100
8.39
228000
46700
10.6
287000
58000
14.9
407000
61900
22.1
603000
55800
1.74
1003
5.58
181000
40100
7.03
228000
46700
9.40
306000
58000
12.5
407000
61900
18.5
603000
55800
1.40
1247
4.50
181000
40100
5.65
228000
46700
7.56
306000
58000
10.1
407000
61900
14.9
603000
55800
Cyclo® 6000 Series
1.18
1479
3.17
152000
40100
4.19
201000
46700
5.73
274000
58000
8.13
390000
61900
12.6
603000
55100
F
0.946
1849
3.03
181000
40100
3.81
228000
46700
5.10
306000
58000
7.38
407000
61900
10.1
603000
55800
V
0.847
2065
2.95
181000
40100
3.41
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55800
0.690
2537
2.95
181000
40100
2.95
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55800
0.575
3045
2.95
152000
40100
2.95
201000
46700
4.97
274000
58000
7.38
390000
61900
10.1
603000
55100
0.503
3481
2.95
181000
40100
2.95
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55800
0.394
4437
2.95
152000
40100
2.95
201000
46700
4.97
274000
58000
7.38
390000
61900
10.1
603000
55100
0.341
5133
2.95
181000
40100
2.95
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55100
0.283
6177
2.95
152000
40100
2.95
201000
46700
4.97
274000
58000
7.38
390000
61900
10.1
603000
55100
0.231
7569
2.95
152000
40100
2.95
201000
46700
4.97
274000
58000
7.38
390000
61900
10.1
603000
55100
FRAME SIZE
6235DA
6235DB
6245DA
6245DB
6255DA
6255DB
6265DA
Speed
Reducers
6275DA
Frame Size Selection Tables • DOUBLE Reduction 3.29
Selection
Tables
Dimensions:
Frame Size Selection Tables
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.30
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1450 RPM
Double Reduction, Ratios 104-731
H, F, V Housing Styles
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
13.9
104
0.13
213
265
0.13
266
265
0.13
398
397
0.13
531
397
0.33
1330
750
0.39
1600
750
0.54
2210
1210
0.58
2340
1210
1.14
4640
2200
1.37
5570
2200
1.70
6900
3310
1.70
6900
3310
2.04
8320
3310
2.04
8320
3310
2.15
8680
3590
2.67
10900
3590
NOTE: Motor HP in GRAY is to overcome breakaway
torque requirements in cold temperatures or high
inertia applications. A torque limiting device is
recommended to protect the unit or driven machine.
Dimensions:
F
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
V
12.0
10.1
8.79
7.44
6.28
5.31
4.55
3.85
3.07
2.59
2.23
1.98
121
143
165
195
231
273
319
377
473
559
649
731
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
213
213
213
213
213
213
213
213
213
213
213
265
265
265
265
265
265
265
265
265
265
265
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
266
266
266
266
266
266
266
266
266
266
266
256
265
265
265
265
265
265
265
265
265
265
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
398
398
398
398
398
398
398
398
398
398
398
398
397
397
397
397
397
397
397
397
397
397
397
397
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
450
531
531
531
531
531
531
531
531
531
508
531
397
397
397
397
397
397
397
397
373
373
355
373
0.28
0.24
0.21
0.17
0.15
0.13
0.13
0.13
0.13
0.13
0.13
0.13
1330 1330 1330 1330 1330 1330 1330 1330 1330 1330 1290 1330
750
750
750
750
750
750
741
741
745
745
741
745
0.30
0.29
0.27
0.23
0.20
0.17
0.14
0.13
0.13
0.13
0.13
1420 1620 1770 1770 1770 1770 1770 1770 1770 1770
1770
750
750
750
750
750
750
719
719
723
723
723
0.47
0.40
0.34
0.29
0.25
0.21
0.18
0.15
0.13
0.13
0.13
0.13
2210 2210 2210 2210 2210 2210 2210 2210 2210 2210 2210 2210
1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210
0.58
0.48
0.41
0.35
0.29
0.25
0.21
0.18
0.14
0.13
0.13
0.13
2730 2660 2660 2660 2660 2660 2660 2660 2660 2660 2620 2660
1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1140 1210
0.98
0.83
0.72
0.61
0.51
0.43
0.37
0.31
0.25
0.21
0.18
0.16
4640 4640 4640 4640 4620 4620 4600 4600 4640 4640 4640 4640
2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200
1.16
1.00
0.86
0.73
0.62
0.52
0.45
0.38
0.30
0.26
0.22
0.19
5500 5570 5570 5570 5570 5570 5570 5570 5570 5570 5570 5570
2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200
0.58
0.55
0.47
0.37
0.32
0.32
0.27
6150 6900 6900 6900 6900 8070 6900
3310 3310 3310 3310 3310 3310 3310
1.46
1.23
1.07
0.91
0.77
0.65
0.55
0.47
0.37
0.32
0.32
0.27
6900 6900 6900 6900 6900 6900 6900 6900 6900 6900 8070 6900
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
1.46
1.23
1.07
0.91
0.77
0.65
0.55
0.47
0.37
0.32
0.32
0.27
6900 6900 6900 6900 6900 6900 6900 6900 6900 6900 8070 6900
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.58
0.57
0.45
0.38
0.37
0.29
7190 8320 8320 8320 9290 8320
3310 3310 3310 3310 3310 3310
1.76
1.49
1.29
1.09
0.92
0.78
0.67
0.57
0.45
0.38
0.37
0.29
8320 8320 8320 8320 8320 8320 8320 8320 8320 8320 9290 8320
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
1.76
1.49
1.29
1.09
0.92
0.78
0.67
0.57
0.45
0.38
0.37
0.29
8320 8320 8320 8320 8320 8320 8320 8320 8320 8320 9290 8320
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.58
0.58
0.50
0.43
0.38
8490 10700 10900 10900 10900
3590 3590 3590 3590 3590
2.15
1.95
1.68
1.42
1.20
1.02
0.87
0.74
0.59
0.50
0.43
0.38
10200 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
2.30
1.95
1.68
1.42
1.20
1.02
0.87
0.74
0.59
0.50
0.43
0.38
10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
3.30 Frame Size Selection Tables • DOUBLE Reduction
FRAME SIZE
6060DA
6065DA
6070DA
6075DA
6090DA
6095DA
6100DA
6105DA
6120DB
6125DB
6130DA
6130DB
6130DC
6135DA
6135DB
6135DC
6140DA
6140DB
6140DC
Cyclo® 6000 Series
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.31
CYCLO® 6000 Speed Reducers
Dimensions:
1450 RPM Frame
Double Reduction, Ratios 841-7569
H, F, V Housing Styles
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
H
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
1.72
841
0.13
213
265
0.13
266
265
0.13
398
397
0.13
531
397
0.13
1330
741
0.13
1770
719
0.13
2210
1210
0.13
2660
1210
0.14
4600
2200
0.17
5570
2200
0.27
6900
3310
0.27
6900
3310
0.27
6900
3310
0.27
8320
3310
0.27
8320
3310
0.27
8320
3310
0.33
10900
3590
0.33
10900
3590
0.33
10900
3590
Size Selection Tables
F
V
1.45
1.16 0.980 0.784 0.702 0.572 0.476 0.417 0.327 0.282 0.235 0.192
1003 1247 1479 1849 2065 2537 3045 3481 4437 5133 6177 7569
0.13
0.13
213
213
265
265
0.13
0.13
266
266
265
265
0.13
0.13
0.13
0.13
0.13
398
398
398
398
398
397
397
397
397
397
0.13
0.13
0.13
0.13
0.13
508
531
531
508
508
355
373
373
355
355
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
1290 1330 1330 1330 1290 1290 1330 1290 1330 1330
741
745
745
745
741
741
745
741
745
745
0.13
0.13
0.13
0.13
0.13
0.13
1770 1700 1770
1700
1700 1700
723
728
723
728
728
728
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
2210 2210 2210 2210 2210 2210 2210 2210 2210 2210
1210 1210 1210 1210 1210 1210 1210 1210 1210 1210
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
2620 2660 2660 2660 2620 2620 2660 2620 2660 2660
1140 1210 1080 1210 1140 1140 1080 1140 1080 1080
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
4640 4640 4640 4640 4640 4640 4640 4640 4640 4640 4640 4640
2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200
0.14
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
5570 5570 5570 5570 5570 5570 5570 5570 5570 5570 5570 5570
2200 2200 2150 2200 2200 2200 2150 2200 2150 2150 2150 2150
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
8070 6900 7510 6900 8070 8070 7510 8070 7510 7510
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
8070 6900 7510 6900 8070 8070 7510 8070 7510 7510 7510 7510
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
8070 6900 7510 6900 8070 8070 7510 8070 7510 7510 7510 7510
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
9290 8320 8660 8320 9290 9290 8660 9290 8660 8660
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
9290 8320 8660 8320 9290 9290 8660 9290 8660 8660 8660 8660
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
9290 8320 8660 8320 9290 9290 8660 9290 8660 8660 8660 8660
3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310 3310
0.28
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
0.28
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
0.28
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900 10900
3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590 3590
Cyclo® 6000 Series
FRAME SIZE
6060DA
6065DA
6070DA
6075DA
6090DA
6095DA
6100DA
Speed
Reducers
6105DA
6120DB
6125DB
6130DA
6130DB
6130DC
6135DA
6135DB
6135DC
6140DA
6140DB
6140DC
Frame Size Selection Tables • DOUBLE Reduction 3.31
Selection
Tables
NOTE: Motor HP in GRAY is to overcome breakaway
torque requirements in cold temperatures or high
inertia applications. A torque limiting device is
recommended to protect the unit or driven machine.
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.32
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1450 RPM
Double Reduction, Ratios 104-731
H, F, V Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
13.9
12.0
104
121
2.98
2.42
12200 11500
3570
3590
3.83
3.29
15500 15500
4960
4960
4.58
3.93
18600 18600
4960
4960
5.50
4.74
22400 22400
6640
6640
6.86
5.89
27900 27900
6640
6640
8.85
7.60
35900 35900
9040
9370
10.7
8.99
43400 42500
8950
9370
13.8
11.9
56400 56400
12500 13200
16.0
14.2
65100 67100
12500 13200
16.0
75700
18900
21.3
101000
23400
25.2
119000
25400
10.1
143
2.15
12000
3590
2.17
12200
3570
2.78
15500
4960
3.33
18600
4960
4.00
22400
6640
4.99
27900
6640
6.43
35900
9370
7.76
43400
9370
8.39
46900
13200
10.1
56400
13200
12.1
67500
13100
-
3.32 Frame Size Selection Tables • DOUBLE Reduction
8.79
165
1.87
12000
3590
1.87
12000
3590
2.40
15500
4960
2.89
18600
4960
3.48
22400
6640
4.32
27900
6640
5.57
35900
9370
6.75
43600
9370
8.39
54100
13200
8.75
56400
13200
10.9
70000
13100
12.7
82000
18900
16.0
103000
23400
16.6
108000
23400
19.9
128000
27600
7.44
195
1.57
12000
3590
1.57
12000
3590
2.04
15500
4960
2.44
18600
4960
2.94
22400
6640
3.66
27900
6640
4.71
35900
9370
5.72
43600
9370
7.41
56400
13200
7.41
56400
13200
7.56
57500
13200
9.18
70000
13100
10.8
82000
18900
14.1
108000
23400
14.1
108000
23400
14.5
110000
29100
16.8
128000
28900
NOTE: Motor HP in GRAY is to overcome breakaway
torque requirements in cold temperatures or high
inertia applications. A torque limiting device is
recommended to protect the unit or driven machine.
F
6.28
231
1.31
11800
3590
1.31
11800
3590
1.72
15500
4960
2.05
18600
4960
2.48
22400
6640
3.09
27900
6640
3.97
35800
9370
4.90
44300
9370
6.26
56400
13200
6.26
56400
13200
7.80
70400
13200
7.80
70400
13200
9.09
82000
18900
12.3
110000
23400
14.5
131000
30900
14.5
131000
30900
5.31
273
1.11
11800
3590
1.11
11800
3590
1.45
15500
4960
1.74
18600
4960
2.09
22400
6640
2.62
27900
6640
3.36
35800
9370
4.15
44300
9370
5.29
56400
13200
6.60
70400
13200
6.60
70400
13200
6.94
74000
18900
7.69
82000
18900
10.4
110000
23400
12.3
131000
32400
-
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
V
4.55
319
0.97
12200
3550
0.97
12200
3550
1.25
15500
4960
1.49
18600
4960
1.80
22400
6640
2.24
27900
6640
2.87
35800
9370
3.54
44300
9370
4.52
56400
13200
5.65
70400
13200
5.73
71400
18900
6.55
81700
18900
8.98
112000
23400
10.7
133000
32600
-
3.85
377
0.82
12200
3550
0.82
12200
3550
1.05
15500
4960
1.26
18600
4960
1.52
22400
6640
1.89
27900
6640
2.43
35800
9370
3.01
44300
9370
3.83
56400
13200
4.78
70400
13200
5.14
75700
18900
5.54
81700
18900
7.60
112000
23400
9.03
133000
32600
-
3.07
473
0.66
12200
3530
0.66
12200
3530
0.83
15400
4960
1.01
18600
4960
1.21
22400
6640
1.50
27900
6640
1.95
35900
9370
2.39
44300
9370
3.06
56400
13200
3.81
70400
13200
3.96
73300
18900
4.46
82300
18900
6.05
112000
23400
7.66
141000
32600
-
2.59
559
0.55
12200
3530
0.55
12200
3530
0.55
12200
3530
0.70
15400
4960
0.85
18600
4960
1.03
22400
6640
1.28
27900
6640
1.64
35900
9370
2.03
44300
9370
2.59
56400
13200
3.22
70400
13200
3.54
77500
18900
3.77
82300
18900
5.13
112000
23400
6.48
141000
32600
-
2.23
649
0.48
12200
3590
0.48
12200
3590
0.48
12200
3590
0.61
15500
4960
0.73
18600
4960
0.88
22400
6640
1.10
27900
6640
1.41
35800
9370
1.74
44300
9350
2.23
56400
13200
2.78
70400
13100
2.95
73400
18900
3.25
82300
18900
4.42
112000
23400
5.54
141000
32600
-
1.98
731
0.42
12200
3530
0.42
12200
3530
0.42
12200
3530
0.54
15400
4960
0.65
18600
4960
0.78
22400
6640
0.98
27900
6640
1.26
35900
9370
1.54
44300
9370
1.97
56400
13200
2.47
70400
13200
2.95
82300
18900
2.95
82300
18900
3.92
112000
23400
4.95
141000
32600
-
FRAME SIZE
6145DA
6145DB
6145DC
6160DC
6165DC
6170DC
6175DC
6180DB
6185DB
6190DA
6190DB
6195DA
6195DB
6205DA
6205DB
6215DA
6215DB
6225DA
6225DB
Cyclo® 6000 Series
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.33
CYCLO® 6000 Speed Reducers
NOTE: Motor HP in GRAY is to overcome breakaway
torque requirements in cold temperatures or high
inertia applications. A torque limiting device is
recommended to protect the unit or driven machine.
Double Reduction, Ratios 841-7569
H, F, V Housing Styles
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
H
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
1.72
841
0.37
12200
3550
0.37
12200
3550
0.37
12200
3550
0.54
15500
4960
0.57
18600
4960
0.68
22400
6640
0.85
27900
6640
1.09
35800
9370
1.34
44300
9370
1.72
56400
13200
2.15
70400
13200
2.95
81700
18900
3.41
112000
23400
4.05
133000
32600
-
1.45
1003
0.31
12200
3590
0.31
12200
3590
0.31
12200
3590
0.54
15500
4960
0.54
18600
4960
0.57
22400
6640
0.71
27900
6640
1.01
35800
9370
1.13
44300
9350
1.44
56400
13200
1.80
70400
13100
2.95
82300
18900
2.95
82300
18900
2.95
112000
23400
3.58
141000
32600
-
Size Selection Tables
1.16
1247
0.27
12200
3530
0.27
12200
3530
0.27
12200
3530
0.54
15400
4960
0.54
18600
4960
0.54
22400
6640
0.57
27900
6640
1.01
35900
9370
1.01
44300
9370
1.16
56400
13200
1.45
70400
13200
2.01
82300
18900
2.95
112000
23400
2.95
141000
32600
-
Cyclo® 6000 Series
0.980
1479
0.27
11000
3590
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.54
18100
4890
0.54
22400
6640
0.54
27900
6640
0.62
35900
9370
1.01
44300
9370
1.01
56400
13200
1.22
70400
13100
2.01
77500
18900
2.01
77500
18900
2.01
99800
23400
2.95
134000
32600
-
F
0.784
1849
0.27
12200
3530
0.27
12200
3530
0.27
12200
3530
0.27
15400
4960
0.27
18600
4960
0.54
22400
6640
0.54
27900
6640
0.54
35900
9370
1.01
44300
9370
1.01
56400
13200
1.01
70400
13200
2.01
82300
18900
2.01
112000
23400
2.01
141000
32600
-
V
0.702
2065
0.27
12200
3590
0.27
12200
3590
0.27
12200
3590
0.27
15500
4960
0.27
18600
4960
0.28
22400
6640
0.54
27900
6640
0.54
35800
9370
0.55
44300
9350
1.01
56400
13200
1.01
70400
13100
2.01
82300
18900
2.01
112000
23400
2.01
141000
32600
-
0.572
2537
0.27
12200
3590
0.27
12200
3590
0.27
12200
3590
0.27
15500
4960
0.27
18600
4960
0.27
22400
6640
0.28
27900
6640
0.54
35800
9370
0.54
44300
9350
1.01
56400
13200
1.01
70400
13100
1.01
82300
18900
2.01
112000
23400
2.01
141000
32600
-
0.476
3045
0.27
11000
3590
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
77500
18900
2.01
99800
23400
2.01
134000
32600
-
0.417
3481
0.27
12200
3590
0.27
12200
3590
0.27
12200
3590
0.27
15500
4960
0.27
18600
4960
0.27
22400
6640
0.27
27900
6640
0.54
35800
9370
0.54
44300
9350
1.01
56400
13200
1.01
70400
13100
1.01
82300
18900
2.01
112000
23400
2.01
141000
32600
-
0.327
4437
0.27
11000
3590
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
77500
18900
2.01
99800
23400
2.01
134000
32600
-
0.282
5133
0.27
11000
3590
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
82300
18900
2.01
112000
23400
2.01
141000
32600
-
0.235
6177
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
77500
18900
2.01
99800
23400
2.01
134000
32600
-
0.192
7569
0.27
11000
3590
0.27
11000
3590
0.27
15500
4960
0.27
18100
4890
0.27
22400
6640
0.27
27900
6640
0.54
35900
9370
0.54
44300
9370
1.01
56400
13200
1.01
70400
13100
1.01
77500
18900
2.01
99800
23400
2.01
134000
32600
-
FRAME SIZE
6145DA
6145DB
6145DC
6160DC
6165DC
6170DC
6175DC
Speed
Reducers
6180DB
6185DB
6190DA
6190DB
6195DA
6195DB
6205DA
6205DB
6215DA
6215DB
6225DA
6225DB
Frame Size Selection Tables • DOUBLE Reduction 3.33
Selection
Tables
Dimensions:
1450 RPM Frame
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.34
CYCLO® 6000 Speed Reducers
Frame Size Selection Tables 1450 RPM
Double Reduction, Ratios 104-731
H, V, F Housing Styles
Dimensions:
H
Output RPM
Ratio
Selection
Tables
Speed
Reducers
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
13.9
104
-
12.0
10.1
121
143
34.1
161000
31500
35.0
166000
31500
38.4
181000
35053
42.7
202000
43200
51.4
243000
43000
58.7
277000
52500
-
3.34 Frame Size Selection Tables • DOUBLE Reduction
8.79
165
26.8
174000
34000
26.8
174000
34000
34.1
220000
37700
36.0
233000
37699
42.7
275000
46300
42.8
276000
46300
60.0
387000
56200
-
7.44
195
22.8
174000
35700
30.5
233000
39700
30.5
233000
39700
36.2
276000
48700
36.2
276000
48700
50.7
387000
59100
-
F
6.28
231
18.5
168000
38400
25.2
228000
42500
25.2
228000
42500
30.3
274000
51800
45.1
407000
61900
-
5.31
273
15.7
168000
40100
21.3
228000
44800
25.8
274000
54500
38.1
407000
61900
-
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
V
4.55
319
13.4
168000
40100
18.3
228000
46700
23.1
287000
57300
32.6
407000
61900
48.5
603000
55800
3.85
377
11.4
168000
40100
15.4
228000
46700
19.5
287000
58000
27.7
407000
61900
40.9
603000
55800
3.07
473
9.81
181000
40100
12.3
228000
46700
16.5
306000
58000
22.0
407000
61900
32.6
603000
55800
2.59
559
8.31
181000
40100
10.5
228000
46700
14.0
306000
58000
18.7
407000
61900
27.7
603000
55800
2.23
649
7.15
181000
40100
9.01
228000
46700
12.0
306000
58000
16.1
407000
61900
23.8
603000
55800
1.98
731
6.35
181000
40100
7.99
228000
46700
10.7
306000
58000
14.2
407000
61900
21.1
603000
55800
FRAME SIZE
6235DA
6235DB
6245DA
6245DB
6255DA
6255DB
6265DA
6275DA
Cyclo® 6000 Series
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.35
CYCLO® 6000 Speed Reducers
1450 RPM
Double Reduction, Ratios 841-7569
H, V, F Housing Styles
Pages
Foot Mount (H) 4.21–4.35
F-Flange
(F) 4.47–4.61
V-Flange
(V) 4.81–4.97
H
Output RPM
Ratio
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
Input HP
Output Torque (in•lbs)
Overhung Load (lbs)
1.72
841
5.09
168000
40100
6.95
228000
46700
8.74
287000
58000
12.4
407000
61900
18.4
603000
55800
1.45
1003
4.63
181000
40100
5.83
228000
46700
7.79
306000
58000
10.4
407000
61900
15.4
603000
55800
1.16
1247
3.72
181000
40100
4.68
228000
46700
6.27
306000
58000
8.35
407000
61900
12.4
603000
55800
Cyclo® 6000 Series
0.980
1479
2.95
152000
40100
3.46
201000
46700
4.97
274000
58000
7.38
390000
61900
10.4
603000
55100
F
0.784
1849
2.95
181000
40100
3.15
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55800
V
0.702
2065
2.95
181000
40100
2.95
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55800
0.572
2537
2.95
181000
40100
2.95
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55800
0.476
3045
2.95
152000
40100
2.95
201000
46700
4.97
274000
58000
7.38
390000
61900
10.1
603000
55100
0.417
3481
2.95
181000
40100
2.95
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55800
0.327
4437
2.95
152000
40100
2.95
201000
46700
4.97
274000
58000
7.38
390000
61900
10.1
603000
55100
0.282
5133
2.95
181000
40100
2.95
228000
46700
4.97
306000
58000
7.38
407000
61900
10.1
603000
55100
0.235
6177
2.95
152000
40100
2.95
201000
46700
4.97
274000
58000
7.38
390000
61900
10.1
603000
55100
0.192
7569
2.95
152000
40100
2.95
201000
46700
4.97
274000
58000
7.38
390000
61900
10.1
603000
55100
FRAME SIZE
6235DA
6235DB
6245DA
6245DB
6255DA
6255DB
6265DA
Speed
Reducers
6275DA
Frame Size Selection Tables • DOUBLE Reduction 3.35
Selection
Tables
Dimensions:
Frame Size Selection Tables
1144_15-sec3_38638_Sect3Dbl 4/27/15 6:24 PM Page 3.36
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Selection
Tables
Speed
Reducers
3.36 Frame Size Selection Tables • DOUBLE Reduction
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.1
4
Dimensions
Dimensions
Speed
Reducers
Cyclo® 6000 Series
Dimensions 4.1
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.2
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount
Single Reduction
CNH-6060/5Y 612HY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNH
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
610HY
6110/5Y
6120/5Y
612HY
5.67
5.67
5.67
7.09
7.09
7.09
7.09
9.06
9.06
3.31
3.31
3.90
5.31
5.31
5.31
5.31
6.10
6.10
5.71
5.94
7.05
7.95
8.19
8.19
8.58
10.20
10.20
3.150
3.150
3.543
3.937
3.937
4.724
4.724
4.724
5.512
2.36
2.36
2.36
2.95
2.95
2.95
2.95
3.74
3.74
0.47
0.47
0.47
0.59
0.59
0.59
0.59
0.79
0.79
2.36
2.36
2.95
3.54
3.54
3.54
3.54
4.53
4.53
0.47
0.47
0.47
0.59
0.59
0.59
0.59
0.79
0.79
0.39
0.39
0.51
0.47
0.47
0.47
0.47
0.59
0.59
0.35
0.35
0.35
0.43
0.43
0.43
0.43
0.55
0.55
1.38
1.38
1.46
1.57
1.57
1.77
1.77
2.17
2.36
5.31
5.31
6.18
6.89
-
8.15
8.94
9.29
10.12
10.91
4.33
4.33
5.28
5.91
5.91
5.91
6.38
8.03
8.03
1.61
1.85
2.05
2.36
2.36
2.36
2.76
3.23
3.23
Model
CNH
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
610HY
6110/5Y
6120/5Y
612HY
4.2 Dimensions
Low Speed Shaft
U*
0.500
0.750
0.875
1.125
1.125
1.125
1.250
1.500
1.500
V
0.98
1.18
1.38
1.38
1.38
1.38
1.77
2.17
2.17
S
10-32UNF
12-28UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
High Speed Shaft
L1
0.63
0.63
0.63
0.79
0.79
0.79
0.79
0.79
0.79
Key
1/8 X 1/8 X 0.79
3/16 X 3/16 X 1.06
3/16 X 3/16 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
3/8 X 3/8 X 1.77
XU*
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.750
0.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
XV
0.98
0.98
0.98
0.98
0.98
0.98
0.98
1.38
1.38
Key
1/8 X 1/8 X 0.71
1/8 X 1/8 X 0.71
1/8 X 1/8 X 0.71
3/16 X 3/16 X 0.75
3/16 X 3/16 X 0.75
3/16 X 3/16 X 0.75
3/16 X 3/16 X 0.75
3/16 X 3/16 X 1.02
3/16 X 3/16 X 1.02
Approx.
Wt. (lb.)
5.5
5.5
18
24
29
31
33
53
55
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.3
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount
Single Reduction
CHH-6130/5Y 6275Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Model
CHH
A
B
C
D
E
E1
F
F1
G
H
J
O
P
BW
6130/5Y
6140/5Y
614HY
6160/5Y
616HY
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
6225Y
6235Y
6245Y
6255Y
6265Y
6275Y
12.99
12.99
12.99
16.14
16.14
16.93
18.50
20.87
20.87
22.83
24.41
26.38
28.35
30.71
34.65
45.67
7.68
7.68
7.68
9.37
9.37
13.19
14.96
17.32
17.32
18.70
20.47
22.05
22.83
24.80
27.56
40.94
12.64
13.43
13.43
16.26
16.26
18.78
20.75
24.41
26.69
27.87
29.61
33.03
34.53
40.94
45.28
57.56
5.906
5.906
6.299
6.299
7.874
7.874
8.661
9.843
9.843
10.433
11.024
11.811
13.189
14.764
15.748
21.260
5.71
5.71
5.71
7.28
7.28
7.48
8.27
9.45
8.66
9.45
10.63
11.42
12.40
13.19
15.16
20.67
0.79
0.79
0.79
0.79
0.79
0.98
0.98
0.98
1.77
1.97
1.57
1.77
1.77
2.17
2.17
2.17
5.71
5.71
5.71
5.91
5.91
10.83
12.60
14.96
14.17
15.55
16.54
18.11
18.90
20.47
23.23
16.54
0.98
0.98
0.98
1.73
1.73
1.18
1.18
1.18
1.57
1.57
1.97
1.97
1.97
2.17
2.17
3.94
0.87
0.87
0.87
0.98
0.98
1.18
1.18
1.38
1.38
1.57
1.57
1.77
1.77
1.97
2.17
2.36
0.71
0.71
0.71
0.71
0.71
0.87
0.87
1.02
1.02
1.02
1.30
1.30
1.54
1.54
1.77
1.77
2.56
2.56
2.76
2.95
3.15
3.15
3.35
3.54
3.94
4.33
4.53
4.72
5.04
5.51
6.30
7.87
11.81
11.81
12.20
14.45
16.02
16.89
18.39
21.22
20.87
22.64
24.02
26.26
28.70
32.09
34.41
45.71
9.06
9.06
9.06
12.52
12.52
14.25
15.35
17.76
18.54
19.96
21.61
23.27
25.08
27.68
30.39
38.82
3.94
4.72
4.72
5.47
5.47
4.92
5.71
6.69
8.46
8.27
9.06
10.24
10.35
12.60
15.35
19.09
Model
CHH
6130/5Y
6140/5Y
614HY
6160/5Y
616HY
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
6225Y
6235Y
6245Y
6255Y
6265Y
6275Y
Low Speed Shaft
U*
1.875
1.875
1.875
2.250
2.250
2.750
3.125
3.625
3.875
4.250
4.625
5.000
5.500
6.250
6.625
7.000
V
2.76
3.54
3.54
3.54
3.54
3.54
4.33
5.31
6.50
6.50
6.50
7.87
7.87
9.45
11.81
13.00
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
Cyclo® 6000 Series
High Speed Shaft
L1
0.71
0.71
0.71
0.71
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.61
1.61
1.93
1.93
2.05
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13
XU*
0.875
0.875
0.875
1.125
1.125
1.375
1.500
1.750
1.750
1.875
2.125
2.250
2.500
3.125
3.125
3.500
XV
1.57
1.57
1.57
1.77
1.77
2.17
2.56
2.76
3.23
3.23
3.23
4.13
4.13
5.12
5.12
5.91
Key
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
1/4 X 1/4 X 1.77
1/4 X 1/4 X 1.77
5/16 X 5/16 X 2.16
3/8 X 3/8 X 2.56
3/8 X 3/8 X 2.76
3/8 X 3/8 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 4.13
5/8 X 5/8 X 4.13
3/4 X 3/4 X 5.12
3/4 X 3/4 X 5.12
7/8 X 7/8 X 5.90
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
All dimensions are in inches
Approx.
Wt. (lb.)
95
97
101
185
196
276
359
529
562
741
902
1109
1354
2110
2624
5424
Dimensions 4.3
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.4
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Single Reduction
CNHJ-6060/5Y 6090/5Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNHJ
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6060/5Y
6070/5Y
6080/5Y
6090/5Y
5.67
5.67
5.67
7.09
3.31
3.31
3.90
5.31
5.71
5.94
7.05
7.95
3.150
3.150
3.543
3.937
2.36
2.36
2.36
2.95
0.47
0.47
0.47
0.59
2.36
2.36
2.95
3.54
0.47
0.47
0.47
0.59
0.39
0.39
0.51
0.47
0.35
0.35
0.35
0.43
1.38
1.38
1.46
1.57
5.31
5.31
6.18
6.89
-
4.33
4.33
5.28
5.91
1.61
1.85
2.05
2.36
Model
CNHJ
6060/5Y
6070/5Y
6080/5Y
6090/5Y
Model
CNHJ
6060/5Y
6070/5Y
6080/5Y
6090/5Y
4.4 Dimensions
U*
0.500
0.750
0.875
1.125
V
0.98
1.18
1.38
1.38
Low Speed Shaft
S
10-32UNF
12-28UNF
12-28UNF
5/16-18UNC
L1
0.63
0.63
0.63
0.79
Key
1/8 X 1/8 X 0.79
3/16 X 3/16 X 1.06
3/16 X 3/16 X 1.18
1/4 X 1/4 X 1.18
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
XU*
0.500
0.500
0.500
0.625
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
42C
48C
56C~145TC
42C
48C
56C~145TC
42C
48C
56C~145TC
42C
48C
56C~145TC
3.75
3.75
5.88
3.75
3.75
5.88
3.75
3.75
5.88
3.75
3.75
5.88
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
-
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
4
4
4
4
4
4
4
4
4
4
4
4
7.49
7.87
8.27
7.72
8.10
8.50
8.79
9.17
9.63
9.73
10.11
10.58
1.78
2.16
2.56
1.78
2.16
2.56
1.74
2.12
2.58
1.78
2.16
2.63
0.47
0.47
0.47
0.47
0.47
0.47
0.39
0.39
0.47
0.47
0.47
0.47
2.44
2.44
3.15
2.44
2.44
3.15
2.48
2.48
3.07
2.44
2.44
4.21
9
9
11
9
9
11
22
22
23
29
30
32
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.5
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Single Reduction
CNHJ-6100/5Y 612HY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6100/5Y
610HY
6110/5Y
6120/5Y
612HY
7.09
7.09
7.09
9.06
9.06
5.31
5.31
5.31
6.10
6.10
8.19
8.19
8.58
10.20
10.20
3.937
4.724
4.724
4.724
5.512
2.95
2.95
2.95
3.74
3.74
0.59
0.59
0.59
0.79
0.79
3.54
3.54
3.54
4.53
4.53
0.59
0.59
0.59
0.79
0.79
0.47
0.47
0.47
0.59
0.59
0.43
0.43
0.43
0.55
0.55
1.57
1.77
1.77
2.17
2.36
-
8.15
8.94
9.29
10.12
10.91
5.91
5.91
6.38
8.03
8.03
2.36
2.36
2.76
3.23
3.23
Model
CNHJ
6100/5Y
610HY
6110/5Y
6120/5Y
612HY
Model
CNHJ
6100/5Y
610HY
6110/5Y
6120/5Y
612HY
Low Speed Shaft
U*
1.125
1.125
1.250
1.500
1.500
V
1.38
1.38
1.77
2.17
2.17
S
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
High Speed Shaft
L1
0.79
0.79
0.79
0.79
0.79
Key
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
3/8 X 3/8 X 1.77
XU*
0.625
0.625
0.625
0.750
0.750
XV
0.98
0.98
0.98
1.38
1.38
Key
3/16 X 3/16 X 0.75
3/16 X 3/16 X 0.75
3/16 X 3/16 X 0.75
3/16 X 3/16 X 1.02
3/16 X 3/16 X 1.02
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
48C
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
3.75
5.88
7.25
5.88
7.25
5.88
7.25
5.88
7.25
5.88
7.25
7.25
3.000
4.500
8.500
4.500
8.500
4.500
8.500
4.500
8.500
4.500
8.500
8.500
4.33
6.69
8.98[1]
6.69
8.98
6.69
8.98
6.69
8.98
6.69
8.98
8.98
0.22
0.22
0.22
0.22
0.22
0.22
0.28
0.43
0.55
0.43
0.55
0.43
0.55
0.43
0.55
0.43
0.55
0.55
4
4
4
4
4
4
4
4
4
4
4
4
10.35
10.81
11.85
10.81
11.85
11.20
12.24
12.82
13.57
12.82
13.57
14.09
2.16
2.63
3.67
2.63
3.67
2.62
3.66
2.63
3.37
2.63
3.37
4.22
0.47
0.47
0.47
0.47
0.47
0.47
0.59
0.47
0.47
0.47
0.47
1.47
2.44
4.21
5.43
4.21
5.43
3.94
3.94
4.21
5.43
4.21
5.43
5.43
34
36
40
38
42
40
45
63
66
65
68
77
Speed
Reducers
Dimensions
Model
CNHJ
Note: [1] Please consult factory for CNHJ-6105-Motor Frame 182TC. Center height “D” for 6105 is less than half of “BD” dimension..
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.5
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.6
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Single Reduction
CHHJ-6130/5Y 6215Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CHHJ
A
B
C
D
E
E1
F
F1
G
H
J
O
P
BW
6130/5Y
6140/5Y
614HY
6160/5Y
616HY
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
12.99
12.99
12.99
16.14
16.14
16.93
18.50
20.87
20.87
22.83
7.68
7.68
7.68
9.37
9.37
13.19
14.96
17.32
17.32
18.70
12.64
13.43
13.43
16.26
16.26
18.78
20.75
24.41
26.69
27.87
5.906
5.906
6.299
6.299
7.874
7.874
8.661
9.843
9.843
10.433
5.71
5.71
5.71
7.28
7.28
7.48
8.27
9.45
8.66
9.45
0.79
0.79
0.79
0.79
0.79
0.98
0.98
0.98
1.77
1.97
5.71
5.71
5.71
5.91
5.91
10.83
12.60
14.96
14.17
15.55
0.98
0.98
0.98
1.73
1.73
1.18
1.18
1.18
1.57
1.57
0.87
0.87
0.87
0.98
0.98
1.18
1.18
1.38
1.38
1.57
0.71
0.71
0.71
0.71
0.71
0.87
0.87
1.02
1.02
1.02
2.56
2.56
2.76
2.95
3.15
3.15
3.35
3.54
3.94
4.33
11.81
11.81
12.20
14.45
16.02
16.89
16.39
21.22
20.87
22.64
9.06
9.06
9.06
12.52
12.52
14.25
15.35
17.76
18.54
19.96
3.94
4.72
4.72
5.47
5.47
4.92
5.71
6.69
8.46
8.27
Model
CHHJ
6130/5Y
6140/5Y
614HY
6160/5Y
616HY
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
4.6 Dimensions
Low Speed Shaft
U*
1.875
1.875
1.875
2.250
2.250
2.750
3.125
3.625
3.875
4.250
V
2.76
3.54
3.54
3.54
3.54
3.54
4.33
5.31
6.50
6.50
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
High Speed Shaft
L1
0.71
0.71
0.71
0.71
0.71
0.94
0.94
1.34
1.34
1.34
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
XU*
0.875
0.875
0.875
1.125
1.125
1.375
1.500
1.750
1.750
1.875
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
XV
1.57
1.57
1.57
1.77
1.77
2.17
2.56
2.76
3.23
3.23
Key
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
1/4 X 1/4 X 1.77
1/4 X 1/4 X 1.77
5/16 X 5/16 X 2.16
3/8 X 3/8 X 2.56
3/8 X 3/8 X 2.76
3/8 X 3/8 X 3.23
1/2 X 1/2 X 3.23
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.7
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Single Reduction
CHHJ-6130/5Y 6215Y (cont.)
All dimensions are in inches
6130/5Y
6140/5Y
614HY
6160/5Y
616HY
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
364TC~365TC
364TSC~365TSC
254TC~256TC
284TC~286TC
324TC~326TC
364TC~365TC
364TSC~365TSC
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
9.00
7.25
7.25
7.25
9.00
11.00
7.25
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
11.00
11.00
7.25
9.00
11.00
11.00
11.00
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
10.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
12.500
12.500
8.500
10.500
12.500
12.500
12.500
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
11.10
8.98
8.98
8.98
11.10
13.86
8.98
8.98
8.98
11.10
13.86
8.98
8.98
11.10
13.86
9.84
9.84
11.10
13.86
13.86
13.86
9.84
11.10
13.86
13.86
13.86
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.54
0.54
0.55
0.43
0.54
0.54
0.55
0.43
0.54
0.54
0.55
0.43
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
0.71
0.71
0.55
0.55
0.71
0.71
0.71
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
8
4
4
4
8
8
15.26
16.01
16.64
17.57
16.05
16.80
17.43
18.35
16.05
16.80
17.43
18.35
18.89
19.63
20.26
21.01
18.89
19.63
20.26
21.01
21.70
22.16
22.78
23.53
24.22
24.78
24.25
24.75
25.50
26.19
27.25
28.54
29.16
29.85
30.91
30.79
31.43
32.06
33.17
33.92
31.79
32.63
33.26
34.37
35.12
32.99
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.75
2.63
3.37
4.00
4.75
5.44
3.38
4.00
4.75
5.44
6.00
3.50
4.00
4.75
5.44
6.50
4.13
4.75
5.44
6.50
4.10
4.73
5.36
6.48
7.22
5.10
4.75
5.38
6.50
7.24
5.12
0.47
0.47
1.10
0.57
0.47
0.47
1.10
0.57
0.47
0.47
1.10
0.57
0.47
0.57
1.20
0.57
0.47
0.57
1.20
0.57
0.57
0.57
1.20
0.57
0.57
0.57
0.57
1.07
0.57
0.57
0.57
1.29
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
4.21
5.43
5.43
5.08
4.21
5.43
5.43
5.08
4.21
5.43
5.43
5.08
4.21
5.71
5.71
5.71
4.21
5.71
5.71
5.71
6.50
5.71
5.71
5.71
7.87
7.87
5.71
5.71
5.71
7.87
7.87
5.71
5.71
7.87
7.87
5.91
5.91
6.89
8.27
8.27
8.27
5.91
6.89
8.27
8.46
8.46
107
111
118
119
109
113
120
121
114
117
125
126
227
231
239
234
238
242
250
245
238
314
321
316
327
347
407
413
421
416
420
599
592
601
626
653
653
659
684
682
675
850
855
880
873
869
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CHHJ
Dimensions 4.7
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.8
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Single Reduction
CHHJ-6225Y 6265Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHHJ
A
B
C
D
E
E1
F
F1
G
H
J
O
P
BW
6225Y
6235Y
6245Y
6255Y
6265Y
24.41
26.38
28.35
30.71
34.65
20.47
22.05
22.83
24.80
27.56
29.61
33.03
34.53
40.94
45.28
11.024
11.811
13.189
14.764
15.748
10.63
11.42
12.40
13.19
15.16
1.57
1.77
1.77
2.17
2.17
16.54
18.11
18.90
20.47
23.23
1.97
1.97
1.97
2.17
2.17
1.57
1.77
1.77
1.97
2.17
1.30
1.30
1.54
1.54
1.77
4.53
4.72
5.04
5.51
6.30
24.02
26.26
28.70
32.09
34.41
21.61
23.27
25.08
27.68
30.39
9.06
10.24
10.35
12.60
15.35
Dimensions
Speed
Reducers
Model
CHHJ
6225Y
6235Y
6245Y
6255Y
6265Y
Model
CHHJ
6225Y
6235Y
6245Y
6255Y
6265Y
4.8 Dimensions
Low Speed Shaft
U*
4.625
5.000
5.500
6.250
6.625
V
6.50
7.87
7.87
9.45
11.81
S
3/4-10UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
High Speed Shaft
L1
1.34
1.61
1.61
1.93
1.93
Key
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
XU*
2.125
2.250
2.500
3.125
3.125
XV
3.23
4.13
4.13
5.12
5.12
Key
1/2 X 1/2 X 3.23
1/2 X 1/2 X 4.13
5/8 X 5/8 X 4.13
3/4 X 3/4 X 5.12
3/4 X 3/4 X 5.12
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
254TC~256TC
284TC~286TC
324TC~326TC
364TC~365TC
364TSC~365TSC
404TC~405TC
404TSC~405TSC
364TC~365TC
404TC~405TC
324TC~326TC
364TC~365TC
404TC~405TC
364TC~365TC
404TC~405TC
364TC~365TC
404TC~405TC
7.25
9.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
8.500
10.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
11.10
11.10
13.86
13.86
13.86
13.86
13.86
13.86
13.86
14.57
13.86
13.86
13.86
13.86
15.75
15.75
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.55
0.55
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
4
4
4
8
8
8
8
4
8
4
8
8
8
8
8
8
34.37
35.00
36.11
36.85
34.74
38.23
35.24
39.57
41.69
41.06
41.77
43.15
48.20
49.57
52.52
53.91
4.76
5.39
6.50
7.24
5.14
8.63
5.63
6.54
8.66
6.54
7.24
8.63
7.25
8.63
7.24
8.63
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
5.51
6.30
8.46
8.46
8.46
8.46
8.46
8.66
8.46
8.27
8.46
8.46
9.45
9.45
9.45
9.45
1043
1043
1053
1056
1048
1063
1050
1281
1303
1599
1591
1585
2392
2422
2971
3002
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.9
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Dimensions
Speed
Reducers
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.9
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.10
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Hollow Input
Single Reduction
CNHX-6065Y 6115Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNHX
A
B
L
D
E
E1
F
F1
G
H
J
O
P
BW
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
610HY
6110/5Y
5.67
5.67
5.67
7.09
7.09
7.09
7.09
3.31
3.31
3.90
5.31
5.31
5.31
5.31
3.62
3.86
5.08
5.59
6.14
6.14
6.69
3.150
3.150
3.543
3.937
3.937
4.724
4.724
2.36
2.36
2.36
2.95
2.95
2.95
2.95
0.47
0.47
0.47
0.59
0.59
0.59
0.59
2.36
2.36
2.95
3.54
3.54
3.54
3.54
0.47
0.47
0.47
0.59
0.59
0.59
0.54
0.39
0.39
0.51
0.47
0.47
0.47
0.47
0.35
0.35
0.35
0.43
0.43
0.43
0.43
1.38
1.38
1.46
1.57
1.57
1.77
1.77
5.31
5.31
6.18
6.89
8.15
8.94
9.29
4.33
4.33
5.28
5.91
5.91
5.91
6.38
1.61
1.85
2.05
2.36
2.36
2.36
2.76
Model
CNHX
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
610HY
6110/5Y
4.10 Dimensions
Low Speed Shaft
U*
0.500
0.750
0.875
1.125
1.125
1.125
1.250
V
0.98
1.18
1.38
1.38
1.38
1.38
1.77
S
10-32UNF
12-28UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
L1
0.63
0.63
0.63
0.79
0.79
0.79
0.79
Key
1/8 X 1/8 X .79
3/16 X 3/16 X 1.06
3/16 X 3/16 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.46
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.11
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Hollow Input
Single Reduction
CNHX-6065Y 6115Y (cont.)
All dimensions are in inches
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
CL
C
Z
6060/5Y
56C
5.88
4.50
6.69[1]
0.20
0.43
4
6.61
2.99
5.59
0.47
0.625
6070/5Y
56C
5.88
4.50
6.69[1]
0.20
0.43
4
6.85
2.99
5.83
0.47
0.625
56C
5.88
4.50
6.69
0.20
0.43
4
8.19
3.11
7.54
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
8.19
3.11
7.54
0.47
0.875
56C
5.88
4.50
6.69
0.20
0.43
4
8.94
3.35
7.91
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
8.94
3.35
8.31
0.47
0.875
56C
5.88
4.50
6.69
0.20
0.43
4
9.29
3.15
8.23
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
9.29
3.15
8.70
0.47
0.875
56C
5.88
4.50
6.69
0.20
0.43
4
9.29
3.15
8.23
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
9.29
3.15
8.70
0.47
0.875
56C
5.88
4.50
6.69
0.20
0.43
4
9.96
3.27
9.31
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
9.96
3.27
9.31
0.47
0.875
182TC-184TC
7.25
8.50
8.98
0.22
0.59
4
10.71
4.02
9.61
0.69
1.125
XU
6080/5Y
6090/5Y
6100/5Y
610HY
6110/5Y
High Speed Shaft
XV
Keyway
+0.0007
0.0000
+0.0007
0.0000
+0.0007
0.0000
+0.0008
0.0000
+0.0007
-.00000
+0.0008
0.0000
+0.0007
-0.0000
+0.0008
-0.0000
+0.0007
-0.0000
+0.0008
-0.0000
+0.0007
-0.0000
+0.0008
-0.0000
+0.0008
-0.0000
Approx
Wt. (lb)
1.10
3/16 X 3/32
10
1.10
3/16 x 3/32
10
1.56
3/16 x 3/32
23
1.56
3/16 x 3/32
23
1.18
3/16 x 3/32
29
1.57
3/16 x 3/32
29
1.18
3/16 x 3/32
33
1.65
3/16 x 3/32
33
1.18
3/16 x 3/32
35
1.65
3/16 x 3/32
35
1.56
3/16 x 3/32
38
1.56
3/16 x 3/32
38
1.85
1/4 x 1/8
44
Speed
Reducers
Dimensions
Model
CNHX
Note: [1] Center height “D” for 6065Y and 6075Y is less than the radius of motor flange diameter “BD” (frame 56C).
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.11
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.12
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Hollow Input
Single Reduction
CNHX-6120Y 616HY
KEY
KEYWAY
CE
CL
L
C
U
XV
XU
V
O
P
S
AK
D
BD
*Shaft Tolerances
L1
G
AJ
BB
Z
J
J
E1
E
E
BW
E1
BF DIA HOLE
R NUMBER OF HOLES
H DIA (4 HOLES)
F1
F
B
A
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
All dimensions are in inches
Model
CNHX
A
B
L
D
E
E1
F
F1
G
H
J
O
P
BW
6120/5Y
612HY
6130/5Y
6140/5Y
614HY
6160/5Y
616HY
9.06
9.06
12.99
12.99
12.99
16.14
16.14
6.10
6.10
7.68
7.68
7.68
9.37
9.37
7.32
7.32
9.43
10.21
10.21
12.12
12.12
4.724
5.512
5.906
5.906
6.299
6.299
7.874
3.74
3.74
5.71
5.71
5.71
7.28
7.28
0.79
0.79
0.79
0.79
0.79
0.79
0.79
4.53
4.53
5.71
5.71
5.71
5.91
5.91
0.79
0.79
0.98
0.98
0.98
1.73
1.73
0.59
0.59
0.87
0.87
0.87
0.98
0.98
0.55
0.55
0.71
0.71
0.71
0.71
0.71
2.17
2.36
2.56
2.56
2.76
2.95
3.15
10.12
10.91
11.81
11.81
12.20
14.45
16.02
8.03
8.03
9.06
9.06
9.06
11.81
11.81
3.23
3.23
3.94
4.72
4.72
5.47
5.47
Model
CNHX
Dimensions
Speed
Reducers
6120/5Y
612HY
6130/5Y
6140/5Y
614HY
6160/5Y
616HY
Model
CNHX
Low Speed Shaft
U*
1.500
1.500
1.875
1.875
1.875
2.250
2.250
V
2.17
2.17
2.76
3.54
3.54
3.54
3.54
S
5/16-18UNC
5/16-18UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
L1
0.79
0.79
0.71
0.71
0.71
0.71
0.71
Key
3/8 X 3/8 X 1.77
3/8 X 3/8 X 1.77
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
CL
C
Z
56C
5.88
4.50
6.69
0.22
0.43
4
11.30
3.98
10.25
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.22
0.43
4
11.30
3.98
10.43
0.47
0.875
182TC-184TC
7.25
8.50
8.98
0.22
0.55
4
12.44
5.12
11.55
0.67
1.125
213TC-215TC
7.25
8.50
8.98
0.22
0.55
4
12.44
5.12
11.65
0.67
1.375
56C
5.88
4.50
6.69
0.22
0.43
4
11.30
3.98
10.25
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.22
0.43
4
11.30
3.98
10.43
0.47
0.875
182TC-184TC
7.25
8.50
8.98
0.22
0.55
4
12.44
5.12
11.55
0.67
1.125
213TC-215TC
7.25
8.50
8.98
0.22
0.55
4
12.44
5.12
11.65
0.67
1.375
XU
6120/5Y
612HY
High Speed Shaft
XV
Keyway
+0.0007
-0.0000
+0.0016
+0.0008
+0.0016
+0.0008
+0.0020
+0.0010
+0.0007
-0.0000
+0.0016
+0.0008
+0.0016
+0.0008
+0.0020
+0.0010
Approx
Wt. (lb)
1.18
3/16 x 3/32
61
1.50
3/16 x 3/32
61
2.48
1/4 x 1/8
64
2.64
5/16 x 5/32
64
1.18
3/16 x 3/32
63
1.50
3/16 x 3/32
63
2.48
1/4 x 1/8
66
2.64
5/16 x 5/32
66
Note: [1] Center height “D” for 6065Y and 6075Y is less than the radius of motor flange diameter “BD” (frame 56C).
4.12 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.13
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Hollow Input
Single Reduction
CNHX-6120Y 616HY (cont.)
All dimensions are in inches
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
CL
C
Z
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
13.51
4.06
12.96
0.47
0.875
182TC-184TC
7.25
8.50
9.00
0.22
0.55
4
15.42
5.96
14.42
0.67
1.125
213TC-215TC
7.25
8.50
9.00
0.22
0.55
4
15.42
5.96
14.06
0.67
1.375
254TC-256TC
7.25
8.50
9.00
0.22
0.55
4
15.42
5.96
14.38
0.67
1.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
14.30
4.06
13.75
0.47
0.875
182TC-184TC
7.25
8.50
9.00
0.22
0.55
4
16.21
5.96
15.20
0.67
1.125
213TC-215TC
7.25
8.50
9.00
0.22
0.55
4
16.21
5.96
14.85
0.67
1.375
254TC-256TC
7.25
8.50
9.00
0.22
0.55
4
16.21
5.96
15.16
0.67
1.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
14.30
4.06
13.75
0.47
0.875
182TC-184TC
7.25
8.50
9.00
0.22
0.55
4
16.21
5.96
15.20
0.67
1.125
213TC-215TC
7.25
8.50
9.00
0.22
0.55
4
16.21
5.96
14.85
0.67
1.375
254TC-256TC
7.25
8.50
9.00
0.22
0.55
4
16.21
5.96
15.16
0.67
1.625
182TC-184TC
7.25
8.50
8.98
0.22
0.55
4
17.38
5.28
16.45
0.79
1.125
213TC-215TC
7.25
8.50
8.98
0.22
0.55
4
17.38
5.26
16.45
0.79
1.375
254TC-256TC
7.25
8.50
8.98
0.22
0.55
4
17.38
5.26
16.45
0.79
1.625
182TC-184TC
7.25
8.50
8.98
0.22
0.55
4
17.38
5.28
16.45
0.79
1.125
213TC-215TC
7.25
8.50
8.98
0.22
0.55
4
17.38
5.26
16.45
0.79
1.375
254TC-256TC
7.25
8.50
8.98
0.22
0.55
4
17.38
5.26
16.45
0.79
1.625
XU
6130/5Y
6140/5Y
614HY
6160/5Y
616HY
High Speed Shaft
XV
Keyway
+0.0008
-0.0000
+0.0016
+0.0008
+0.0020
+0.0010
+0.0020
+0.0010
+0.0008
-0.0000
+0.0016
+0.0008
+0.0020
+0.0010
+0.0020
+0.0010
+0.0008
-0.0000
+0.0016
+0.0008
+0.0020
+0.0010
+0.0020
+0.0010
+0.0016
+0.0008
+0.0020
+0.0010
+0.0020
+0.0010
+0.0016
+0.0008
+0.0020
+0.0010
+0.0020
+0.0010
Approx
Wt. (lb)
1.61
3/16 x 3/32
104
1.91
1/4 x 1/8
112
2.68
5/16 x 5/32
111
2.99
3/8 x 3/16
112
1.61
3/16 x 3/32
106
1.91
1/4 x 1/8
114
2.68
5/16 x 5/32
113
2.99
3/8 x 3/16
114
1.61
3/16 x 3/32
110
1.91
1/4 x 1/8
118
2.68
5/16 x 5/32
117
2.99
3/8 x 3/16
118
2.01
1/4 x 1/8
191
2.48
5/16 x 5/32
194
3.11
3/8 x 3/16
193
2.01
1/4 x 1/8
202
2.48
5/16 x 5/32
205
3.11
3/8 x 3/16
204
Speed
Reducers
Dimensions
Model
CNHX
Note: [1] Center height “D” for 6065Y and 6075Y is less than the radius of motor flange diameter “BD” (frame 56C).
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.13
2916_14-sec4_38638_Sect4 11/24/14 7:49 PM Page 4.14
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Shovel Base
Single Reduction
CNH-6120/5Y CHH-6190/5Y-SB
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNH, CHH
A
B
C
D
E
E1
F
F1
G
H
J
O
P
BW
6120/5Y-SB
612HY-SB
6130/5Y-SB
6140/5Y-SB
614HY-SB
6160/5Y-SB
616HY-SB
6170/5Y-SB
6180/5Y-SB
6190/5Y-SB
9.06
9.06
12.99
12.99
12.99
16.14
16.14
16.93
18.50
20.87
6.10
6.10
7.68
7.68
7.68
9.37
9.37
13.19
14.96
17.32
10.20
10.20
12.64
13.43
13.43
16.26
16.26
18.78
20.75
24.41
4.724
5.512
5.906
5.906
6.299
6.299
7.874
7.874
8.661
9.843
3.74
3.74
5.71
5.71
5.71
7.28
7.28
7.48
8.27
9.45
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.98
0.98
0.98
4.53
4.53
5.71
5.71
5.71
5.91
5.91
10.83
12.60
14.96
0.79
0.79
0.98
0.98
0.98
1.73
1.73
1.18
1.18
1.18
0.59
0.59
0.87
0.87
0.87
0.98
0.98
1.18
1.18
1.38
0.55
0.55
0.71
0.71
0.71
0.71
0.71
0.87
0.87
1.02
2.17
2.36
2.56
2.56
2.76
2.95
3.15
3.15
3.35
3.54
10.12
10.91
11.81
11.81
12.20
14.45
16.02
16.89
18.39
21.22
8.03
8.03
9.06
9.06
9.06
12.52
12.52
14.25
15.35
17.76
3.23
3.23
3.94
4.72
4.72
5.47
5.47
4.92
5.71
6.69
Model
CNH, CHH
6120/5Y-SB
612HY-SB
6130/5Y-SB
6140/5Y-SB
614HY-SB
6160/5Y-SB
616HY-SB
6170/5Y-SB
6180/5Y-SB
6190/5Y-SB
4.14 Dimensions
Low Speed Shaft
U*
1.500
1.500
1.875
1.875
1.875
2.250
2.250
2.750
3.125
3.625
V
2.17
2.17
2.76
3.54
3.54
3.54
3.54
3.54
4.33
5.31
S
5/16-18UNC
5/16-18UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
High Speed Shaft
L1
0.79
0.79
0.71
0.71
0.71
0.71
0.71
0.94
0.94
1.34
Key
3/8 X 3/8 X 1.77
3/8 X 3/8 X 1.77
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
XU*
0.750
0.750
0.875
0.875
0.875
1.125
1.125
1.375
1.500
1.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
XV
1.38
1.38
1.57
1.57
1.57
1.77
1.77
2.17
2.56
2.76
Key
3/16 X 3/16 X 1.02
3/16 X 3/16 X 1.02
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
1/4 X 1/4 X 1.77
1/4 X 1/4 X 1.77
5/16 X 5/16 X 2.16
3/8 X 3/8 X 2.56
3/8 X 3/8 X 2.76
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.15
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Shovel Base
Single Reduction
CNH-6120/5Y CHH-6190/5Y-SB (cont.)
All dimensions are in inches
6120/5Y-SB
612HY-SB
6130/5Y-SB
6140/5Y-SB
614HY-SB
6160/5Y-SB
616HY-SB
6170/5Y-SB
6180/5Y-SB
6190/5Y-SB
Dimensions
C2
GAP
X[1]
Weight w/o Motor (lb)
C2
GAP
X[1]
Weight w/o Motor (lb)
C2
GAP
X[1]
Weight w/o Motor (lb)
C2
GAP
X[1]
Weight w/o Motor (lb)
C2
GAP
X[1]
Weight w/o Motor (lb)
C2
GAP
X[1]
Weight w/o Motor (lb)
C2
GAP
X
Weight w/o Motor (lb)
C2
GAP
X[1]
Weight w/o Motor (lb)
C2
GAP
X
Weight w/o Motor (lb)
C2
GAP
X
Weight w/o Motor (lb)
143T 145T
24.25
0.52
-0.18
85
24.25
0.52
0.61
87
30.83
0.52
0.22
125
31.61
0.52
0.22
173
31.61
0.52
0.61
178
32.68
0.52
1.36
231
32.68
0.52
2.93
242
34.41
0.71
2.93
320
182T 184T
24.25
0.71
-0.18
83
24.25
0.71
0.61
85
30.83
0.71
0.22
125
31.61
0.71
0.22
148
31.61
0.71
0.61
152
32.68
0.71
1.36
229
32.68
0.71
2.93
240
34.41
0.71
2.93
318
40.04
0.88
2.97
434
213T 215T
28.74
0.88
-0.97
99
28.74
0.88
-0.18
101
30.83
0.88
0.22
135
31.61
0.88
0.22
145
31.61
0.88
0.61
149
37.68
0.88
-0.38
250
37.68
0.88
1.20
261
37.83
0.88
2.18
326
40.04
0.88
2.97
431
47.01
1.00
3.17
635
254T
256T
34.84
1.00
-0.77
135
35.63
1.00
-0.77
156
35.63
1.00
-0.38
161
37.68
1.00
-0.38
245
37.68
1.00
1.20
256
43.43
1.00
0.33
390
46.02
1.00
1.11
484
47.01
1.00
3.17
630
284T
286T
40.87
1.00
-1.25
287
40.87
1.00
0.33
298
43.43
1.00
0.33
382
46.02
1.00
1.11
476
52.09
1.00
1.27
689
324T
326T
364T
365T
Speed
Reducers
Dimensions
Model
46.14
1.50
-0.70
401
50.04
1.50
0.09
499
52.09
1.50
1.27
679
Note: [1] Negative number for dimension “X” indicates the shovel base is below the mounting surface of the Cyclo®.
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.15
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.16
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Shovel Base
Single Reduction
CHH-6205Y-SB 6235Y-SB (cont.)
*Shaft Tolerances
Shaft Nominal Diameter (inches)
Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
0.750 (3/4) through 1.125 (1 1/8)
1.250 (1 1/4) through 1.875 (1 7/8)
2.000 (2) through 3.125 (3 1/8)
3.250 (3 1/4) through 4.625 (4 5/8)
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0004
+0.0000/-0.0005
+0.0000/-0.0006
+0.0000/-0.0007
+0.0000/-0.0009
+0.0000/-0.0010
All dimensions are in inches
Model
CHH
A
B
C
D
E
E1
F
F1
G
H
J
O
P
BW
6205Y-SB
6215Y-SB
6225Y-SB
6235Y-SB
20.87
22.83
24.41
26.38
17.32
18.70
20.47
22.05
26.69
27.87
29.61
33.03
9.843
10.433
11.024
11.811
8.66
9.45
10.63
11.42
1.77
1.97
1.57
1.77
14.17
15.55
16.54
18.11
1.57
1.57
1.97
1.97
1.38
1.57
1.57
1.77
1.02
1.02
1.30
1.30
3.94
4.33
4.53
4.72
20.87
22.64
24.02
26.26
18.54
19.96
21.61
23.27
8.46
8.27
9.06
10.24
Dimensions
Speed
Reducers
Model
CHH
6205Y-SB
6215Y-SB
6225Y-SB
6235Y-SB
Model
6205Y
6215Y
6225Y
6235Y
4.16 Dimensions
Low Speed Shaft
U*
3.875
4.250
4.625
5.000
V
6.50
6.50
6.50
7.87
Dimensions
C2
GAP
X
Weight w/o Motor (lb)
C2
GAP
X
Weight w/o Motor (lb)
C2
GAP
X
Weight w/o Motor (lb)
C2
GAP
X
Weight w/o Motor (lb)
S
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
143T
High Speed Shaft
L1
1.34
1.34
1.34
1.61
145T
182T
Key
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
184T
213T 215T
47.81
1.00
3.17
644
45.43
1.00
4.74
812
XU*
1.750
1.875
2.125
2.250
254T
256T
47.81
1.00
3.17
639
51.81
1.00
2.89
870
51.42
1.00
4.27
1024
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
XV
3.23
3.23
3.23
4.13
284T 286T
53.88
1.00
1.27
707
51.81
1.00
2.89
862
56.50
1.00
2.45
1060
59.88
1.00
3.24
1278
Key
3/8 X 3/8 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 4.13
324T
326T
53.88
1.50
1.27
697
54.88
1.50
1.86
881
56.50
1.50
2.45
1050
59.88
1.50
3.24
1268
364T 365T
54.82
1.63
0.29
714
56.81
1.63
0.88
900
59.41
1.63
1.47
1065
61.85
1.63
2.26
1280
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.17
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Top Mount
Single Reduction
CNHP-6110/5Y 612HY, CHHP-6130/5Y 614HY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
A
B
C
D
E
E1
F
F1
G
H
J
P
BW
6110/5Y
6120/5Y
612HY
6130/5Y
6140/5Y
614HY
7.09
9.06
9.06
12.99
12.99
12.99
5.31
6.10
6.10
7.68
7.68
7.68
8.58
10.20
10.20
12.64
13.43
13.43
4.724
4.724
5.512
5.906
5.906
6.299
2.95
3.74
3.74
5.71
5.71
5.71
0.59
0.79
0.79
0.79
0.79
0.79
3.54
4.53
4.53
5.71
5.71
5.71
0.59
0.79
0.79
0.98
0.98
0.98
0.47
0.59
0.59
0.87
0.87
0.87
0.43
0.55
0.55
0.71
0.71
0.71
1.77
2.17
2.36
2.56
2.56
2.76
6.38
8.03
8.03
9.06
9.06
9.06
2.76
3.23
3.23
3.94
4.72
4.72
Model
CNHP, CHHP
6110/5Y
6120/5Y
612HY
6130/5Y
6140/5Y
614HY
Low Speed Shaft
U*
1.250
1.500
1.500
1.875
1.875
1.875
Model
Dimensions
MIN
PH
MAX
6110/5Y
PW
6120/5Y
612HY
V
1.77
2.17
2.17
2.76
3.54
3.54
56
S
5/16-18UNC
5/16-18UNC
5/16-18UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
High Speed Shaft
L1
0.79
0.79
0.79
0.71
0.71
0.71
143T 145T 182T 184T
7.08
9.53
12.01
Speed
Reducers
Dimensions
Model
CNHP, CHHP
213T
7.08
9.53
14.96
Key
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
3/8 X 3/8 X 1.77
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
XU*
0.625
0.750
0.750
0.875
0.875
0.875
XV
0.98
1.38
1.38
1.57
1.57
1.57
Key
3/16 X 3/16 X 0.75
3/16 X 3/16 X 1.02
3/16 X 3/16 X 1.02
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
215T 254T 256T 284T 286T 324T 326T 364T 365T 404T 405T 444T 445T 447T
75 (6110/5)
Weight w/o Motor (lb) 67(6110/5), 91(6120/5), 93(612H) 99 (6120/5)
101 (612H)
PH
6130/5Y
MIN
MAX
PW
Weight w/o Motor (lb)
PH
6140/5Y
614HY
MIN
MAX
PW
Weight w/o Motor (lb)
7.59
9.91
14.96
141
7.59
9.91
14.96
7.59
9.91
17.01
154
7.59
9.91
17.01
143(6140/5), 147(614H)
Cyclo® 6000 Series
156 (6140/5)
160 (614H)
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.17
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.18
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Top Mount
Single Reduction
CHHP-6160/5Y 6275Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CHHP
A
B
C
D
E
E1
F
F1
G
H
J
P
BW
6160/5Y
616HY
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
6225Y
6235Y
6245Y
6255Y
6265Y
6275Y
16.14
16.14
16.93
18.50
20.87
20.87
22.83
24.41
26.38
28.35
30.71
34.65
45.67
9.37
9.37
13.19
14.96
17.32
17.32
18.70
20.47
22.05
22.83
24.80
27.56
40.94
16.26
16.26
18.78
20.75
24.41
26.69
27.87
29.61
33.03
34.53
40.94
45.28
57.56
6.299
7.874
7.874
8.661
9.843
9.843
10.433
11.024
11.811
13.189
14.764
15.748
21.260
7.28
7.28
7.48
8.27
9.45
8.66
9.45
10.63
11.42
12.40
13.19
15.16
20.67
0.79
0.79
0.98
0.98
0.98
1.77
1.97
1.57
1.77
1.77
2.17
2.17
2.17
5.91
5.91
10.83
12.60
14.96
14.17
15.55
16.54
18.11
18.90
20.47
23.23
16.54
1.73
1.73
1.18
1.18
1.18
1.57
1.57
1.97
1.97
1.97
2.17
2.17
3.94
0.98
0.98
1.18
1.18
1.38
1.38
1.57
1.57
1.77
1.77
1.97
2.17
2.36
0.71
0.71
0.87
0.87
1.02
1.02
1.02
1.30
1.30
1.54
1.54
1.77
1.77
2.95
3.15
3.15
3.35
3.54
3.94
4.33
4.53
4.72
5.04
5.51
6.30
7.87
12.52
12.52
14.25
15.35
17.76
18.54
19.96
21.61
23.27
25.08
27.68
30.39
38.82
5.47
5.47
4.92
5.71
6.69
8.46
8.27
9.06
10.24
10.35
12.60
15.35
19.09
Model
CHHP
6160/5Y
616HY
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
6225Y
6235Y
6245Y
6255Y
6265Y
6275Y
4.18 Dimensions
Low Speed Shaft
U*
2.250
2.250
2.750
3.125
3.625
3.875
4.250
4.625
5.000
5.500
6.250
6.625
7.000
V
3.54
3.54
3.54
4.33
5.31
6.50
6.50
6.50
7.87
7.87
9.45
11.81
13.00
S
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
High Speed Shaft
L1
0.71
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.61
1.61
1.93
1.93
2.05
Key
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13
XU*
1.125
1.125
1.375
1.500
1.750
1.750
1.875
2.125
2.250
2.500
3.125
3.125
3.500
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
XV
1.77
1.77
2.17
2.56
2.76
3.23
3.23
3.23
4.13
4.13
5.12
5.12
5.91
Key
1/4 X 1/4 X 1.77
1/4 X 1/4 X 1.77
5/16 X 5/16 X 2.16
3/8 X 3/8 X 2.56
3/8 X 3/8 X 2.76
3/8 X 3/8 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 4.13
5/8 X 5/8 X 4.13
3/4 X 3/4 X 5.12
3/4 X 3/4 X 5.12
7/8 X 7/8 X 5.90
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.19
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount,Top Mount
Single Reduction
CHHP-6160/5Y 6275Y (cont.)
All dimensions are in inches
6160/5Y
616HY
Dimensions
MIN
PH
MAX
PW
Weight w/o Motor (lb)
PH
6170/5Y
MIN
MAX
PW
Weight w/o Motor (lb)
PH
6180/5Y
56
143T 145T 182T 184T 213T 215T 254T 256T 284T 286T 324T 326T 364T 365T 404T 405T 444T 445T 447T
9.16
9.29
9.29
12.17
12.17
12.11
14.02
17.01
18.03
223 (6160/5), 234 (616H)
6190/5Y
MIN
MAX
PW
6205Y
MIN
MAX
PW
6215Y
10.20
13.08
18.50
346
10.71
14.03
20.00
433
12.28
15.45
20.00
595
MIN
MAX
PW
13.40
17.13
15.98
629
Weight w/o Motor (lb)
PH
10.20
13.02
17.01
339
10.71
14.09
17.01
416
Weight w/o Motor (lb)
PH
262 (6160/5)
273 (616H)
10.20
13.08
17.01
325
Weight w/o Motor (lb)
PH
244 (6160/5)
255 (616H)
13.52
17.00
18.98
680
MIN
MAX
PW
14.27
18.25
24.02
911
Weight w/o Motor (lb)
PH
6225Y
MIN
MAX
PW
14.78
18.76
24.02
1065
Weight w/o Motor (lb)
PH
6235Y
MIN
MAX
PW
15.64
19.87
15.98
1173
Weight w/o Motor (lb)
PH
6245Y
MIN
MAX
PW
Weight w/o Motor (lb)
PH
6255Y
MIN
MAX
PW
6265Y
MIN
MAX
PW
6275Y
15.77
19.75
24.02
1268
17.05
20.80
24.02
1506
19.29
25.04
24.02
2773
Weight w/o Motor (lb)
PH
15.77
19.75
18.98
1221
17.05
20.80
22.05
1483
18.31
22.06
28.03
2252
Weight w/o Motor (lb)
PH
12.28
15.39
24.02
654
13.52
17.00
18.98
732
MIN
MAX
PW
Weight w/o Motor (lb)
Cyclo® 6000 Series
14.52
18.25
28.03
1055
15.26
18.74
28.03
1216
16.27
19.75
28.03
1354
17.58
20.82
28.03
1650
18.80
22.04
28.03
2387
19.82
25.07
28.03
2903
23.44
28.69
28.35
5828
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
18.80
22.04
30.00
2428
19.82
25.07
30.00
3028
Dimensions 4.19
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.20
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Dimensions
Speed
Reducers
4.20 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.21
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount
Double Reduction
CNH-6060/5DAY 6120/5DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CNH
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
5.67
5.67
7.09
7.09
9.06
3.31
3.31
5.31
5.31
6.10
7.01
7.24
9.57
10.12
12.28
3.150
3.150
3.937
3.937
4.724
2.36
2.36
2.95
2.95
3.74
0.47
0.47
0.59
0.59
0.79
2.36
2.36
3.54
3.54
4.53
0.47
0.47
0.59
0.59
0.79
0.39
0.39
0.47
0.47
0.59
0.35
0.35
0.43
0.43
0.55
1.38
1.38
1.57
1.57
2.17
5.31
5.31
6.89
-
8.15
10.12
4.33
4.33
5.91
5.91
8.03
1.61
1.85
2.36
2.36
3.23
Model
CNH
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
U*
0.500
0.750
1.125
1.125
1.500
V
0.98
1.18
1.38
1.38
2.17
Low Speed Shaft
S
10-32UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
Cyclo® 6000 Series
L1
0.63
0.63
0.79
0.79
0.79
Key
1/8 X 1/8 X .79
3/16 X 3/16 X 1.06
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
3/8 X 3/8 X 1.77
XU*
0.500
0.500
0.500
0.500
0.625
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions
Speed
Reducers
Approx.
Wt. (lb.)
9
10
26
33
64
Dimensions 4.21
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.22
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount
Double Reduction
CHH-6130/5DAY 6140/5DCY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CHH
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
12.99
12.99
12.99
12.99
12.99
12.99
7.68
7.68
7.68
7.68
7.68
7.68
13.66
14.29
14.53
14.45
15.08
15.31
5.906
5.906
5.906
5.906
5.906
5.906
5.71
5.71
5.71
5.71
5.71
5.71
0.79
0.79
0.79
0.79
0.79
0.79
5.71
5.71
5.71
5.71
5.71
5.71
0.98
0.98
0.98
0.98
0.98
0.98
0.87
0.87
0.87
0.87
0.87
0.87
0.71
0.71
0.71
0.71
0.71
0.71
2.56
2.56
2.56
2.56
2.56
2.56
-
11.81
11.81
11.81
11.81
11.81
11.81
9.06
9.06
9.06
9.06
9.06
9.06
3.94
3.94
3.94
4.72
4.72
4.72
Model
CHH
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
4.22 Dimensions
U*
1.875
1.875
1.875
1.875
1.875
1.875
V
2.76
2.76
2.76
3.54
3.54
3.54
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
L1
0.71
0.71
0.71
0.71
0.71
0.71
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
XU*
0.500
0.625
0.625
0.500
0.625
0.625
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
Approx.
Wt. (lb.)
90
99
101
90
99
101
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.23
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount
Double Reduction
CHH-6160/5DCY 6275DAY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Model
CHH
A
B
C
D
E
E1
F
F1
G
H
J
O
P
BW
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
6225DAY
6225DBY
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
16.14
16.93
18.50
20.87
20.87
20.87
20.87
22.83
22.83
24.41
24.41
26.38
26.38
28.35
28.35
30.71
30.71
34.65
45.67
9.37
13.19
14.96
17.32
17.32
17.32
17.32
18.70
18.70
20.47
20.47
22.05
22.05
22.83
22.83
24.80
24.80
27.56
40.94
18.19
20.04
22.72
24.76
25.71
26.38
27.76
28.78
30.71
30.43
33.86
34.76
36.93
36.26
38.39
42.56
44.61
48.94
59.21
6.299
7.874
8.661
9.843
9.843
9.843
9.843
10.433
10.433
11.024
11.024
11.811
11.811
13.189
13.189
14.764
14.764
15.748
21.260
7.28
7.48
8.27
9.45
9.45
8.66
8.66
9.45
9.45
10.63
10.63
11.42
11.42
12.40
12.40
13.19
13.19
15.16
20.67
0.79
0.98
0.98
0.98
0.98
1.77
1.77
1.97
1.97
1.57
1.57
1.77
1.77
1.77
1.77
2.17
2.17
2.17
2.17
5.91
10.83
12.60
14.96
14.96
14.17
14.17
15.55
15.55
16.54
16.54
18.11
18.11
18.90
18.90
20.47
20.47
23.23
16.54
1.73
1.18
1.18
1.18
1.18
1.57
1.57
1.57
1.57
1.97
1.97
1.97
1.97
1.97
1.97
2.17
2.17
2.17
3.94
0.98
1.18
1.18
1.38
1.38
1.38
1.38
1.57
1.57
1.57
1.57
1.77
1.77
1.77
1.77
1.97
1.97
2.17
2.36
0.71
0.87
0.87
1.02
1.02
1.02
1.02
1.02
1.02
1.30
1.30
1.30
1.30
1.54
1.54
1.54
1.54
1.77
1.77
2.95
3.15
3.35
3.54
3.54
3.94
3.94
4.33
4.33
4.53
4.53
4.72
4.72
5.04
5.04
5.51
5.51
6.30
7.87
13.74
16.38
17.76
20.91
20.91
20.87
20.87
22.64
22.64
24.02
24.02
26.26
26.26
28.70
28.70
32.09
32.09
34.41
45.71
11.81
13.39
14.57
16.93
16.93
17.64
17.64
19.09
19.09
20.71
20.71
22.13
22.13
24.17
24.17
26.38
26.38
28.98
37.40
5.47
4.92
5.71
6.69
6.69
8.46
8.46
8.27
8.27
9.06
9.06
10.24
10.24
10.35
10.35
12.60
12.60
15.35
19.09
Model
CHH
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
6225DAY
6225DBY
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
U*
2.250
2.750
3.125
3.625
3.625
3.875
3.875
4.250
4.250
4.625
4.625
5.000
5.000
5.500
5.500
6.250
6.250
6.625
7.000
V
3.54
3.54
4.33
5.31
5.31
6.50
6.50
6.50
6.50
6.50
6.50
7.87
7.87
7.87
7.87
9.45
9.45
11.81
13.00
Low Speed Shaft
S
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
Cyclo® 6000 Series
L1
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.34
1.34
1.34
1.34
1.61
1.61
1.61
1.61
1.93
1.93
1.93
2.05
Key
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13
XU*
0.750
0.750
0.875
0.750
0.875
0.750
0.875
0.875
1.125
0.875
1.375
1.125
1.500
1.125
1.500
1.375
1.750
1.750
1.750
High Speed Shaft
XV
Key
1.38
3/16 X 3/16 X 1.02
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
1.57
3/16 X 3/16 X 1.38
2.17
5/16 X 5/16 X 2.16
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
2.17
5/16 X 5/16 X 2.16
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
All dimensions are in inches
Approx.
Wt. (lb.)
207
282
404
531
551
573
602
781
829
946
1050
1208
1283
1446
1513
2227
2392
2955
5468
Dimensions 4.23
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.24
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Double Reduction
CNHJ-6060/5DAY 6120/5DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNHJ
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
5.67
5.67
7.09
7.09
9.06
3.31
3.31
5.31
5.31
6.10
7.01
7.24
9.57
10.12
12.28
3.150
3.150
3.937
3.937
4.724
2.36
2.36
2.95
2.95
3.74
0.47
0.47
0.59
0.59
0.79
2.36
2.36
3.54
3.54
4.53
0.47
0.47
0.59
0.59
0.79
0.39
0.39
0.47
0.47
0.59
0.35
0.35
0.43
0.43
0.55
1.38
1.38
1.57
1.57
2.17
5.31
5.31
6.89
-
8.15
10.12
4.33
4.33
5.91
5.91
8.03
1.61
1.85
2.36
2.36
3.23
Model
CNHJ
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
Model
CNHJ
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
4.24 Dimensions
U*
0.500
0.750
1.125
1.125
1.500
Motor
Frame
42C
48C
42C
48C
42C
48C
56~145TC
42C
48C
56~145TC
42C
48C
56~145TC
V
0.98
1.18
1.38
1.38
2.17
Low Speed Shaft
S
10-32UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
L1
0.63
0.63
0.79
0.79
0.79
Key
1/8 X 1/8 X .79
3/16 X 3/16 X 1.06
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
3/8 X 3/8 X 1.77
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
XU*
0.500
0.500
0.500
0.500
0.625
AJ
AK
BD
BB
BF
R
CE
XJ
Z
3.75
3.75
3.75
3.75
3.75
3.75
5.88
3.75
3.75
5.88
3.75
3.75
5.88
3.000
3.000
3.000
3.000
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
4.33
4.33
4.33
4.33
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
-
0.28
0.28
0.28
0.28
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
4
4
4
4
4
4
4
4
4
4
4
4
4
8.79
9.17
9.02
9.40
11.35
11.72
12.13
11.90
12.28
12.68
14.06
14.44
14.91
1.78
2.16
1.78
2.16
1.78
2.16
2.56
1.78
2.16
2.56
1.78
2.16
2.63
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Min.
I.D.
2.44
2.44
2.44
2.44
2.44
2.44
3.15
2.44
2.44
3.15
2.44
2.44
4.21
Approx
Wt. (lb)
12
12
13
13
29
30
32
36
36
39
69
69
71
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.25
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Double Reduction
CHHJ-6130/5DAY 6140/5DCY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHHJ
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
12.99
12.99
12.99
12.99
12.99
12.99
7.68
7.68
7.68
7.68
7.68
7.68
13.66
14.29
14.53
14.45
15.08
15.31
5.906
5.906
5.906
5.906
5.906
5.906
5.71
5.71
5.71
5.71
5.71
5.71
0.79
0.79
0.79
0.79
0.79
0.79
5.71
5.71
5.71
5.71
5.71
5.71
0.98
0.98
0.98
0.98
0.98
0.98
0.87
0.87
0.87
0.87
0.87
0.87
0.71
0.71
0.71
0.71
0.71
0.71
2.56
2.56
2.56
2.56
2.56
2.56
-
11.81
11.81
11.81
11.81
11.81
11.81
9.06
9.06
9.06
9.06
9.06
9.06
3.94
3.94
3.94
4.72
4.72
4.72
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
Model
CHHJ
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
U*
1.875
1.875
1.875
1.875
1.875
1.875
V
2.76
2.76
2.76
3.54
3.54
3.54
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
L1
0.71
0.71
0.71
0.71
0.71
0.71
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
XU*
0.500
0.625
0.625
0.500
0.625
0.625
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
42C
48C
56C~143TC
42C
48C
56C~143TC
48C
56C~145TC
42C
48C
56C~143TC
42C
48C
56C~145TC
48C
56C~145TC
182TC~184TC
3.75
3.75
5.88
3.75
3.75
5.88
3.75
5.87
3.75
3.75
5.88
3.75
3.75
5.88
3.75
5.88
7.25
3.000
3.000
4.500
3.000
3.000
4.500
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
3.000
4.500
8.500
4.33
4.33
6.69
4.33
4.33
6.69
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
4.33
6.69
8.98
0.22
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.43
0.55
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
15.44
15.82
16.22
16.07
16.45
16.92
16.69
17.15
16.23
16.61
17.01
16.86
17.24
17.70
17.47
17.94
18.98
1.78
2.16
2.56
1.78
2.16
2.63
2.16
2.63
1.78
2.16
2.56
1.78
2.16
2.63
2.16
2.63
3.67
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
2.44
2.44
4.21
2.44
2.44
4.21
2.44
4.21
2.44
2.44
4.21
2.44
2.44
4.21
2.44
4.21
5.43
94
94
96
103
105
107
107
108
94
94
96
104
105
107
107
108
112
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CHHJ
Dimensions 4.25
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.26
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Double Reduction
CHHJ-6160/5DCY 6225DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Dimensions
Speed
Reducers
All dimensions are in inches
Model
CHHJ
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
6225DAY
6225DBY
16.14
16.93
18.50
20.87
20.87
20.87
20.87
22.83
22.83
24.41
24.41
9.37
13.19
14.96
17.32
17.32
17.32
17.32
18.70
18.70
20.47
20.47
18.19
20.04
22.72
24.76
25.71
26.38
27.76
28.78
30.71
30.43
33.86
6.299
7.874
8.661
9.843
9.843
9.843
9.843
10.433
10.433
11.024
11.024
7.28
7.48
8.27
9.45
9.45
8.66
8.66
9.45
9.45
10.63
10.63
0.79
0.98
0.98
0.98
0.98
1.77
1.77
1.97
1.97
1.57
1.57
5.91
10.83
12.60
14.96
14.96
14.17
14.17
15.55
15.55
16.54
16.54
1.73
1.18
1.18
1.18
1.18
1.57
1.57
1.57
1.57
1.97
1.97
0.98
1.18
1.18
1.38
1.38
1.38
1.38
1.57
1.57
1.57
1.57
0.71
0.87
0.87
1.02
1.02
1.02
1.02
1.02
1.02
1.30
1.30
2.95
3.15
3.35
3.54
3.54
3.94
3.94
4.33
4.33
4.53
4.53
-
13.74
16.38
17.76
20.91
20.91
20.87
20.87
22.64
22.64
24.02
24.02
11.81
13.39
14.57
16.93
16.93
17.64
17.64
19.09
19.09
20.71
20.71
5.47
4.92
5.71
6.69
6.69
8.46
8.46
8.27
8.27
9.06
9.06
Model
CHHJ
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
6225DAY
6225DBY
4.26 Dimensions
U*
2.250
2.750
3.125
3.625
3.625
3.875
3.875
4.250
4.250
4.625
4.625
V
3.54
3.54
4.33
5.31
5.31
6.50
6.50
6.50
6.50
6.50
6.50
Low Speed Shaft
S
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
L1
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.34
1.34
1.34
1.34
Key
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 6.5
XU*
0.750
0.750
0.875
0.750
0.875
0.750
0.875
0.875
1.125
0.875
1.375
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.38
3/16 X 3/16 X 1.02
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
1.57
3/16 X 3/16 X 1.38
2.17
5/16 X 5/16 X 2.16
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.27
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Double Reduction
CHHJ-6160/5DCY 6225DBY (cont.)
All dimensions are in inches
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
6225DAY
6225DBY
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
5.88
7.25
5.88
7.25
5.88
7.25
7.25
7.25
5.88
7.25
5.88
7.25
7.25
7.25
5.88
7.25
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
4.500
8.500
4.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
6.69
8.98
6.69
8.98
6.69
8.98
8.98
8.98
6.69
8.98
6.69
8.98
8.98
8.98
6.69
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.55
0.43
0.55
0.43
0.55
0.55
0.55
0.43
0.55
0.43
0.55
0.55
0.55
0.43
0.55
0.43
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
20.81
21.56
22.67
23.41
25.34
26.09
26.72
27.65
27.39
28.13
28.33
29.08
29.71
30.64
29.00
29.75
30.38
31.13
31.76
32.69
31.41
32.15
32.78
33.71
33.33
34.08
34.71
35.46
33.06
33.81
34.43
35.36
37.24
37.86
38.61
39.30
2.63
3.37
2.63
3.37
2.63
3.37
4.00
4.93
2.63
3.37
2.63
3.37
4.00
4.93
2.63
3.37
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.75
2.63
3.37
4.00
4.93
3.38
4.00
4.75
5.44
0.47
0.47
0.47
0.47
0.47
0.47
1.10
0.57
0.47
0.47
0.47
0.47
1.10
0.57
0.47
0.47
0.47
0.47
1.10
0.57
0.47
0.47
1.10
0.57
0.47
0.57
1.20
0.57
0.47
0.47
1.10
0.57
0.57
1.20
0.57
0.57
4.21
5.43
4.21
5.43
4.21
5.43
5.43
5.08
4.21
5.43
4.21
5.43
5.43
5.08
4.21
5.43
4.21
5.43
5.43
5.08
4.21
5.43
5.43
5.08
4.21
5.71
5.71
5.71
4.21
5.43
5.43
5.08
5.71
5.71
5.71
7.87
217
221
292
295
416
419
427
428
541
545
563
567
574
576
583
587
614
618
625
626
793
796
804
805
871
875
882
878
958
962
969
970
1088
1095
1090
1101
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CHHJ
Dimensions 4.27
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.28
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Double Reduction
CHHJ-6235DAY 6275DAY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Dimensions
Speed
Reducers
All dimensions are in inches
Model
CHHJ
A
B
C
D
E
E1
F
F1
G
H
J
O1
O
P
BW
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
26.38
26.38
28.35
28.35
30.71
30.71
34.65
45.67
22.05
22.05
22.83
22.83
24.80
24.80
27.56
40.94
34.76
36.93
36.26
38.39
42.56
44.61
48.94
59.21
11.811
11.811
13.189
13.189
14.764
14.764
15.748
21.260
11.42
11.42
12.40
12.40
13.19
13.19
15.16
20.67
1.77
1.77
1.77
1.77
2.17
2.17
2.17
2.17
18.11
18.11
18.90
18.90
20.47
20.47
23.23
16.54
1.97
1.97
1.97
1.97
2.17
2.17
2.17
3.94
1.77
1.77
1.77
1.77
1.97
1.97
2.17
2.36
1.30
1.30
1.54
1.54
1.54
1.54
1.77
1.77
4.72
4.72
5.04
5.04
5.51
5.51
6.30
7.87
-
26.26
26.26
28.70
28.70
32.09
32.09
34.41
45.71
22.13
22.13
24.17
24.17
26.38
26.38
28.98
37.40
10.24
10.24
10.35
10.35
12.60
12.60
15.35
19.09
Model
CHHJ
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
4.28 Dimensions
U*
5.000
5.000
5.500
5.500
6.250
6.250
6.625
7.000
V
7.87
7.87
7.87
7.87
9.45
9.45
11.81
13.00
Low Speed Shaft
S
1-8UNC
1-8UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.61
1.61
1.61
1.61
1.93
1.93
1.93
2.05
Key
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13
XU*
1.125
1.500
1.125
1.500
1.375
1.750
1.750
1.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
2.17
5/16 X 5/16 X 2.16
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.29
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, C-Face
Double Reduction
CHHJ-6235DAY 6275DAY (cont.)
All dimensions are in inches
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
11.00
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
11.00
7.25
7.25
7.25
9.00
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
12.500
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
8.500
10.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
13.86
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
13.86
8.98
8.98
8.98
11.10
8.98
8.98
11.10
13.86
8.98
8.98
11.10
13.86
8.98
8.98
11.10
13.86
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
37.39
38.14
38.76
39.52
40.43
40.93
41.68
42.37
43.43
38.89
39.63
40.26
41.01
41.89
42.39
43.14
43.82
44.89
45.94
46.56
47.31
48.00
48.73
49.36
50.04
51.11
53.06
53.69
54.37
55.44
63.34
63.96
64.65
65.71
2.63
3.37
4.00
4.75
3.50
4.00
4.75
5.44
6.50
2.63
3.37
4.00
4.75
3.50
4.00
4.75
5.44
6.50
3.38
4.00
4.75
5.44
4.13
4.75
5.44
6.50
4.13
4.75
5.44
6.50
4.13
4.75
5.44
6.50
0.47
0.57
1.20
0.57
0.57
1.07
0.57
0.57
0.57
0.47
0.57
1.20
0.57
0.57
1.07
0.57
0.57
0.57
0.57
1.20
0.57
0.57
1.29
0.57
0.57
0.57
1.29
0.57
0.57
0.57
1.29
0.57
0.57
0.57
4.21
5.71
5.71
5.71
5.71
5.71
5.71
7.87
7.87
4.21
5.71
5.71
5.71
5.71
5.71
5.71
7.87
7.87
5.71
5.71
5.71
7.87
5.71
5.71
7.87
7.87
5.71
5.71
7.87
7.87
5.71
5.71
7.87
7.87
1250
1254
1262
1257
1331
1337
1345
1340
1344
1488
1493
1500
1495
1560
1566
1574
1569
1573
2265
2271
2267
2278
2462
2455
2464
2489
3025
3018
3026
3051
5538
5531
5540
5565
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CHHJ
Dimensions 4.29
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.30
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Hollow Input
Double Reduction
CNHX-6065DAY 6140/5DCY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNHX
A
B
L
D
E
E1
F
F1
G
H
J
O
P
BW
6065DAY
6075DAY
6095DAY
6105DAY
6125DBY
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
5.67
5.67
7.09
7.09
9.06
12.99
12.99
12.99
12.99
12.99
12.99
3.31
3.31
5.31
5.31
6.10
7.68
7.68
7.68
7.68
7.68
7.68
4.92
5.16
7.48
8.03
9.92
11.58
11.94
12.48
12.36
12.72
13.26
3.150
3.150
3.937
3.937
4.724
5.906
5.906
5.906
5.906
5.906
5.906
2.36
2.36
2.95
2.95
3.74
5.71
5.71
5.71
5.71
5.71
5.71
0.47
0.47
0.59
0.59
0.79
0.79
0.79
0.79
0.79
0.79
0.79
2.36
2.36
3.54
3.54
4.53
5.71
5.71
5.71
5.71
5.71
5.71
0.47
0.47
0.59
0.59
0.79
0.98
0.98
0.98
0.98
0.98
0.98
0.39
0.39
0.47
0.47
0.59
0.87
0.87
0.87
0.87
0.87
0.87
0.35
0.35
0.43
0.43
0.55
0.71
0.71
0.71
0.71
0.71
0.71
1.38
1.38
1.57
1.57
2.17
2.56
2.56
2.56
2.56
2.56
2.56
5.31
5.31
6.89
6.89
8.74
11.81
11.81
11.81
11.81
11.81
11.81
4.33
4.33
5.91
5.91
8.03
9.06
9.06
9.06
9.06
9.06
9.06
1.61
1.85
2.36
2.36
3.23
3.94
3.94
3.94
4.72
4.72
4.72
Model
CNHX
6065DAY
6075DAY
6095DAY
6105DAY
6125DBY
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
U*
0.500
0.750
1.125
1.125
1.500
1.875
1.875
1.875
1.875
1.875
1.875
V
0.98
1.18
1.38
1.38
2.17
2.76
2.76
2.76
3.54
3.54
3.54
Low Speed Shaft
S
10-32UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
L1
0.63
0.63
0.79
0.79
0.79
0.71
0.71
0.71
0.71
0.71
0.71
Key
1/8 X 1/8 X .79
3/16 X 3/16 X 1.06
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
3/8 X 3/8 X 1.77
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
Note: [1] Center height “D” for 6065DAY and 6075DAY is less than the radius of motor flange diameter half of “BD” (frame 56C).
4.30 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.31
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Hollow Input
Double Reduction
CNHX-6065DAY 6140/5DCY (cont.)
All dimensions are in inches
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
CL
C
Z
6065DAY
56C
5.88
4.50
6.69[1]
0.20
0.43
4
7.91
2.99
6.89
0.47
0.625
6075DAY
56C
5.88
4.50
6.69[1]
0.20
0.43
4
8.15
2.99
7.13
0.47
0.625
6095DAY
56C
5.88
4.50
6.69
0.20
0.43
4
10.47
2.99
9.45
0.47
0.625
6105DAY
56C
5.88
4.50
6.69
0.20
0.43
4
11.02
2.99
10.00
0.47
0.625
56C
5.88
4.50
6.69
0.20
0.43
4
13.27
3.35
12.24
0.47
0.625
143-145TC
5.88
4.50
6.69
0.20
0.43
4
13.27
3.35
12.64
0.47
0.875
56C
5.88
4.50
6.69
-
0.43
4
14.57
2.99
13.55
0.47
0.625
56C
5.88
4.50
6.69
-
0.43
4
15.29
3.35
14.42
0.47
0.625
143-145TC
5.88
4.50
6.69
-
0.43
4
15.29
3.35
14.65
0.47
0.875
56C
5.88
4.50
6.69
0.20
0.43
4
15.63
3.15
14.57
0.47
0.625
143-145TC
5.88
4.50
6.69
0.20
0.43
4
15.63
3.15
15.04
0.47
0.875
56C
5.88
4.50
6.69
-
0.43
4
15.35
2.99
14.33
0.47
0.625
56C
5.88
4.50
6.69
0.20
0.43
4
16.06
3.35
15.20
0.47
0.625
143-145TC
5.88
4.50
6.69
0.20
0.43
4
16.06
3.35
15.43
0.47
0.875
56C
5.88
4.50
6.69
-
0.43
4
16.41
3.15
15.35
0.47
0.625
143-145TC
5.88
4.50
6.69
-
0.43
4
16.41
3.15
15.82
0.47
0.875
XU
6125DBY
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
Cyclo® 6000 Series
High Speed Shaft
XV
Keyway
+0.0007
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0008
-0.0000
+0.0007
-.00000
+0.0008
-0.0000
+0.0007
-.00000
+0.0007
-.00000
+0.0008
-0.0000
+0.0007
-.00000
+0.0008
-0.0000
Approx
Wt. (lb)
1.10
3/16 x 3/32
13
1.10
3/16 x 3/32
14
1.10
3/16 x 3/32
32
1.10
3/16 x 3/32
38
1.18
3/16 x 3/32
68
1.57
3/16 x 3/32
68
1.10
3/16 x 3/32
95
1.18
3/16 x 3/32
104
1.57
3/16 x 3/32
104
1.18
3/16 x 3/32
101
1.65
3/16 x 3/32
106
1.10
3/16 x 3/32
95
1.18
3/16 x 3/32
104
1.57
3/16 x 3/32
104
1.18
3/16 x 3/32
101
1.65
3/16 x 3/32
106
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CNHX
Dimensions 4.31
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.32
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Dimensions
Speed
Reducers
4.32 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.33
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Shovel Base
Double Reduction
CHH-6160/5DCY 6190/5DBY-SB
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHH
6160/5DCY-SB
6170/5DCY-SB
6180/5DBY-SB
6190/5DAY-SB
6190/5DBY-SB
Model
CHH
6160/5DCY-SB
6170/5DCY-SB
6180/5DBY-SB
6190/5DAY-SB
6190/5DBY-SB
A
16.14
16.93
18.50
20.87
20.87
U*
2.250
2.750
3.125
3.625
3.625
B
9.37
13.19
14.96
17.32
17.32
V
3.54
3.54
4.33
5.31
5.31
Dimensions
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C
18.19
20.04
22.72
24.76
25.71
D
6.299
7.874
8.661
9.843
9.843
Low Speed Shaft
S
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
143T
145T
32.24
0.50 0.52
1.40
239
34.09
0.50 0.52
2.97
314
40.91
0.50 0.52
2.97
480
38.82
0.50 0.52
4.94
564
43.90
0.50 0.52
4.15
628
Cyclo® 6000 Series
E
7.28
7.48
8.27
9.45
9.45
E1
0.79
0.98
0.98
0.98
0.98
L1
0.71
0.94
0.94
1.34
1.34
182T
F
5.91
10.83
12.60
14.96
14.96
Key
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
184T
32.24
0.71
1.40
237
34.09
0.71
2.97
312
40.91
0.71
2.97
455
38.82
0.71
4.94
562
43.90
0.71
4.15
602
213T
215T
F1
1.73
1.18
1.18
1.18
1.18
XU*
0.750
0.750
0.875
0.750
0.875
254T
G
0.98
1.18
1.18
1.38
1.38
H
0.71
0.87
0.87
1.02
1.02
J
2.95
3.15
3.35
3.54
3.54
O
13.74
16.38
17.76
20.91
20.91
P
11.81
13.39
14.57
16.93
16.93
BW
5.47
4.92
5.71
6.69
6.69
High Speed Shaft
XV
Key
1.38
3/16 X 3/16 X 1.02
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
256T
284T
286T
324T
326T
Speed
Reducers
Dimensions
Model
CHH
6160/5DCY-SB
6170/5DCY-SB
6180/5DBY-SB
6190/5DAY-SB
6190/5DBY-SB
364T
365T
40.91
0.88
2.97
452
43.90
0.88
4.15
599
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.33
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.34
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Shovel Base
Double Reduction
CHH-6205DBY 6275DAY-SB
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CHH
A
B
C
D
E
E1
F
F1
G
H
J
O
P
BW
6205DAY-SB
6205DBY-SB
6215DAY-SB
6215DBY-SB
6225DAY-SB
6225DBY-SB
6235DAY-SB
6235DBY-SB
6245DAY-SB
6245DBY-SB
6255DAY-SB
6255DBY-SB
6265DAY-SB
6275DAY-SB
20.87
20.87
22.83
22.83
24.41
24.41
26.38
26.38
28.35
28.35
30.71
30.71
34.65
45.67
17.32
17.32
18.70
18.70
20.47
20.47
22.05
22.05
22.83
22.83
24.80
24.80
27.56
40.94
26.38
27.76
28.78
30.71
30.43
33.86
34.76
36.93
36.26
38.39
42.56
44.61
48.94
59.21
9.843
9.843
10.433
10.433
11.024
11.024
11.811
11.811
13.189
13.189
14.764
14.764
15.748
21.260
8.66
8.66
9.45
9.45
10.63
10.63
11.42
11.42
12.40
12.40
13.19
13.19
15.16
20.67
1.77
1.77
1.97
1.97
1.57
1.57
1.77
1.77
1.77
1.77
2.17
2.17
2.17
2.17
14.17
14.17
15.55
15.55
16.54
16.54
18.11
18.11
18.90
18.90
20.47
20.47
23.23
16.54
1.57
1.57
1.57
1.57
1.97
1.97
1.97
1.97
1.97
1.97
2.17
2.17
2.17
3.94
1.38
1.38
1.57
1.57
1.57
1.57
1.77
1.77
1.77
1.77
1.97
1.97
2.17
2.36
1.02
1.02
1.02
1.02
1.30
1.30
1.30
1.30
1.54
1.54
1.54
1.54
1.77
1.77
3.94
3.94
4.33
4.33
4.53
4.53
4.72
4.72
5.04
5.04
5.51
5.51
6.30
7.87
20.87
20.87
22.64
22.64
24.02
24.02
26.26
26.26
28.70
28.70
32.09
32.09
34.41
45.71
17.64
17.64
19.09
19.09
20.71
20.71
22.13
22.13
24.17
24.17
26.38
26.38
28.98
37.40
8.46
8.46
8.27
8.27
9.06
9.06
10.24
10.24
10.35
10.35
12.60
12.60
15.35
19.09
Model
CHH
6205DAY-SB
6205DBY-SB
6215DAY-SB
6215DBY-SB
6225DAY-SB
6225DBY-SB
6235DAY-SB
6235DBY-SB
6245DAY-SB
6245DBY-SB
6255DAY-SB
6255DBY-SB
6265DAY-SB
6275DAY-SB
4.34 Dimensions
U*
3.875
3.875
4.250
4.250
4.625
4.625
5.000
5.000
5.500
5.500
6.250
6.250
6.625
7.000
V
6.50
6.50
6.50
6.50
6.50
6.50
7.87
7.87
7.87
7.87
9.45
9.45
11.81
13.00
Low Speed Shaft
S
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.34
1.34
1.34
1.34
1.34
1.34
1.61
1.61
1.61
1.61
1.93
1.93
1.93
2.05
Key
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13
XU*
0.750
0.875
0.875
1.125
0.875
1.375
1.125
1.500
1.125
1.500
1.375
1.750
1.750
1.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
1.57
3/16 X 3/16 X 1.38
2.17
5/16 X 5/16 X 2.16
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
2.17
5/16 X 5/16 X 2.16
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.35
CYCLO® 6000 Speed Reducers
Dimensions Foot Mount, Shovel Base
Double Reduction
CHH-6205DBY 6275DAY-SB (cont.)
All dimensions are in inches
6205DAY
6205DBY
6215DAY
6215DBY
6225DAY
6225DBY
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
Dimensions
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
C2
GAP
X
Weight w/o Motor
143T
Cyclo® 6000 Series
145T
45.94
0.52
4.15
678
46.97
0.52
4.74
857
42.49
0.50
5.39
873
48.62
0.52
5.33
1022
182T 184T
45.94
0.71
4.15
653
46.97
0.71
4.74
832
42.49
0.75
5.39
848
48.62
0.71
5.33
997
51.18
0.71
6.87
1252
52.68
0.71
8.25
1490
58.19
0.71
9.82
2270
213T 215T
45.94
0.88
4.15
650
46.97
0.88
4.74
829
46.99
0.88
4.83
845
52.13
0.88
3.76
894
48.62
0.88
5.33
994
52.91
0.88
5.33
1100
56.18
0.88
5.14
1274
56.22
0.88
6.12
1355
57.68
0.88
6.52
1512
57.68
0.88
7.50
1584
61.61
0.88
9.07
2278
71.54
1.00
9.07
3060
81.81
1.00
14.59
5574
254T
256T
52.13
1.00
3.76
889
52.64
1.00
4.35
1005
58.50
1.00
3.48
1164
56.18
1.00
5.14
1269
62.20
1.00
4.26
1408
57.68
1.00
6.52
1507
63.66
1.00
5.64
1637
67.20
1.00
7.22
2341
67.20
1.00
8.09
2493
71.54
1.00
9.07
3055
81.81
1.00
14.59
5569
284T
286T
324T
326T
62.20
1.00
4.26
1400
63.66
1.00
5.64
1629
67.20
1.00
7.22
2333
72.28
1.00
6.19
2552
76.61
1.00
7.18
3114
86.89
1.00
12.69
5628
Speed
Reducers
Dimensions
Model
72.28
1.50
6.19
2542
76.59
1.50
7.18
3104
86.89
1.50
12.69
5618
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.35
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.36
CYCLO® 6000 Speed Reducers
Dimensions Universal F-Flange Mount
Single Reduction
CNF-6060/5Y 6120/5Y
*Shaft Tolerances
Shaft Nominal Diameter (inches)
0.500 (1/2) through 0.625 (5/8)
Tolerances (inches)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
1.250 (1 1/4) through 1.875 (1 7/8)
2.000 (2) through 3.125 (3 1/8)
3.250 (3 1/4) through 4.625 (4 5/8)
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0005
+0.0000/-0.0006
+0.0000/-0.0007
+0.0000/-0.0009
+0.0000/-0.0010
All dimensions are in inches
Model
CNF
6060/5Y
6070/5Y
Dimensions
Speed
Reducers
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
B
3.1492
3.1485
3.1492
3.1485
3.7397
3.7388
4.1334
4.1325
4.1334
4.1325
4.5271
4.5262
5.5113
5.5103
Model
CNF
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
4.36 Dimensions
U*
0.500
0.750
0.875
1.125
1.125
1.250
1.500
C
G
H
NO.
M
N
P
Q
S1
AH
5.71
0.16
0.26
6
2.68
60
4.33
M6
0.83
3.86
5.94
0.16
0.26
6
2.91
60
4.33
M6
0.83
3.86
7.05
0.20
0.35
8
3.58
22.5
5.28
M8
1.06
4.65
7.95
0.24
0.35
8
4.49
22.5
5.91
M8
1.14
5.28
8.19
0.24
0.35
8
4.49
22.5
5.91
M8
1.10
5.28
8.58
0.24
0.35
8
4.65
22.5
6.38
M8
1.02
5.75
10.20
0.55
0.43
6
5.47
60
8.03
M10
1.30
7.09
V
0.98
1.18
1.38
1.38
1.38
1.77
2.17
Low Speed Shaft
S
10-32UNF
12-28UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
L1
0.63
0.63
0.63
0.79
0.79
0.79
0.79
Key
1/8 X 1/8 X .79
3/16 X 3/16 X 1.06
3/16 X 3/16 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
XU*
0.500
0.500
0.500
0.625
0.625
0.625
0.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
1.38
3/16 X 3/16 X 1.02
Approx.
Wt. (lb.)
7
7
18
19
21
24
44
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.37
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount
Single Reduction
CHF-6130/5 6190/5Y
*Shaft Tolerances
All dimensions are in inches
Model
CHF
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
Model
CHF
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
B
6.4955
6.4945
6.4955
6.4945
7.8734
7.8723
9.8419
9.8408
11.0230
11.0217
12.5977
12.5963
U*
1.875
1.875
2.250
2.750
3.125
3.625
C
G
H
NO.
M
N
P
P1
Q
S1
AH
X
12.64
0.63
0.43
6
7.01
60
9.06
9.06
M10
1.22
8.07
8.19
13.43
0.63
0.43
6
7.80
60
9.06
9.06
M10
1.22
8.07
8.19
16.26
0.39
0.55
6
8.74
30
11.81
12.52
M12
1.38
10.63
8.98
18.78
0.47
0.55
8
10.31
22.5
13.39
14.25
M12
1.61
11.81
9.57
20.75
0.47
0.55
8
11.77
22.5
14.57
15.35
M12
1.50
12.99
10.16
24.41
0.39
0.55
12
14.37
15
16.93
17.76
M12
1.61
14.96
11.22
V
2.76
3.54
3.54
3.54
4.33
5.31
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
Cyclo® 6000 Series
L1
0.71
0.71
0.71
0.94
0.94
1.34
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
XU*
0.875
0.875
1.125
1.375
1.500
1.750
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
2.17
5/16 X 5/16 X 2.16
2.56
3/8 X 3/8 X 2.56
2.76
3/8 X 3/8 X 2.76
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Approx.
Wt. (lb.)
79
82
146
212
289
430
Dimensions 4.37
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.38
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount
Single Reduction
CHF-6205Y 6265Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Dimensions
Speed
Reducers
All dimensions are in inches
Model
CHF
6205Y
6215Y
6225Y
6235Y
6245Y
6255Y
6265Y
B
14.1725
14.1711
15.3536
15.3522
16.5346
16.5331
17.9126
17.9110
19.6843
19.6827
21.2590
21.2572
22.4401
22.4383
Model
CHF
6205Y
6215Y
6225Y
6235Y
6245Y
6255Y
6265Y
4.38 Dimensions
U*
3.875
4.250
4.625
5.000
5.500
6.250
6.625
C
G
H
NO.
M
N
P
P1
Q
S1
AH
X
26.69
0.79
0.71
12
16.14
15
17.64
18.54
M16
2.20
15.94
-
27.87
0.79
0.81
12
16.65
15
19.09
19.96
M18
2.20
17.32
-
29.61
0.79
0.87
12
17.87
15
20.71
21.61
M20
2.52
18.70
-
33.03
0.79
0.87
12
19.88
15
22.13
23.27
M20
2.56
20.08
-
34.53
0.98
1.06
12
20.83
15
24.17
25.08
M24
2.56
22.05
-
40.94
1.18
1.06
12
24.25
15
26.38
27.68
M24
3.58
24.02
-
45.28
1.57
1.34
12
28.03
15
28.98
30.39
M30
3.35
25.98
-
V
6.50
6.50
6.50
7.87
7.87
9.45
11.81
Low Speed Shaft
S
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.34
1.34
1.34
1.61
1.61
1.93
1.93
Key
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
XU*
1.750
1.875
2.125
2.250
2.500
3.125
3.125
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
3.23
3.23
3.23
4.13
4.13
5.12
5.12
Key
3/8 X 3/8 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 4.13
5/8 X 5/8 X 4.13
3/4 X 3/4 X 5.12
3/4 X 3/4 X 5.12
Approx.
Wt. (lb.)
470
644
765
944
1186
1751
2249
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.39
CYCLO® 6000 Speed Reducers
Dimensions Vertical F-Flange Mount
Single Reduction
CVF-6130/5Y 6190/5Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Speed
Reducers
Model
CVF
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
Model
CVF
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
B
6.4955
6.4945
6.4955
6.4945
7.8734
7.8723
9.8419
9.8408
11.0230
11.0217
12.5977
12.5963
U*
1.875
1.875
2.250
2.750
3.125
3.625
Dimensions
All dimensions are in inches
C
G
H
NO.
M
N
P
P1
Q
S1
AH
X
Y
12.64
0.63
0.43
6
7.01
60
9.06
9.06
M10
1.22
8.07
5.98
8.23
13.43
0.63
0.43
6
7.80
60
9.06
9.06
M10
1.22
8.07
5.98
8.23
16.26
0.39
0.55
6
8.74
30
11.81
12.52
M12
1.38
10.63
8.54
9.06
18.78
0.47
0.55
8
10.31
22.5
13.39
14.25
M12
1.61
11.81
8.74
10.24
20.75
0.47
0.55
8
11.77
22.5
14.57
15.35
M12
1.50
12.99
9.33
10.24
24.41
0.39
0.55
12
14.37
15
16.93
17.76
M12
1.61
14.96
10.43
10.24
V
2.40
3.19
3.15
3.31
3.94
4.92
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
Cyclo® 6000 Series
L1
0.71
0.71
0.71
0.94
0.94
1.34
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
XU*
0.875
0.875
1.125
1.375
1.500
1.750
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
2.17
5/16 X 5/16 X 2.16
2.56
3/8 X 3/8 X 2.56
2.76
3/8 X 3/8 X 2.76
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Approx.
Wt. (lb.)
79
82
146
212
289
430
Dimensions 4.39
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.40
CYCLO® 6000 Speed Reducers
Dimensions Vertical F-Flange Mount, C-Face, Overhead Drive
Single Reduction
CVFJ-6130/5Y 6180/5Y
56C~145TC ADAPTER
BD
AK
X
VIEW X-X
A
F
BF HOLE DIA
R NUMBER OF HOLES
AJ BOLT CIRCLE
182TC~215TC ADAPTER
BD
AK
X
MIN I.D.
XU
Z
MIN I.D.
XJ
XV
BB
Z
CE
F/2
P
G
H (4 HOLES)
F/2
A F
L1 V
T
CE
C
B
M
V1
T
U
VIEW Y-Y
S
Y
Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Dimensions
Speed
Reducers
All dimensions are in inches
Model
CVFJ
Model
DVX
A
B
C
F
G
H
6130/5Y
35DVX
12.50
6.14
16.02
10.50
0.88
6140/5Y
40DVX
14.00
6.14
17.15
12.00
1.00
6160/5Y
50DVX
16.00
6.77
18.22
14.00
1.46
6170/5Y
60DVX
19.50
8.50
24.56
17.00
1.65
0.94
15.50
13.39
6180/5Y
70DVX
22.00
9.06
26.03
19.00
1.75
1.12
15.50
14.57
Model
CVFJ
Model
DVX
6130/5Y
6140/5Y
6160/5Y
Low Speed Shaft
V1
S
5.76
5/16-18UNC
35DVX
T
0.38
U
1.6250
V
4.50
40DVX
0.50
1.6875
5.50
6.89
50DVX
0.75
2.1875
5.50
-
6170/5Y
60DVX
0.75
2.4375
7.50
6180/5Y
70DVX
1.00
2.9375
7.50
4.40 Dimensions
M
P
0.56
9.50
9.06
0.69
10.50
9.06
0.81
10.50
11.81
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X 1.38
L1
1.00
Key
3/8x 3/8 X 3.70
XU
0.875
3/8-16UNC
1.00
3/8 X 3/8 X 4.69
0.875
1.57
3/8-16UNC
1.00
1/2 X 1/2 X 5.24
1.125
1.77
1/4 X 1/4 X 1.77
-
3/8-16UNC
1.00
5/8 X 5/8 X 6.50
1.375
2.17
5/16 X 5/16 X 2.16
9.22
3/8-16UNC
1.00
3/4 X 3/4 X 6.50
1.500
2.56
3/8 X 3/8 X 2.56
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
3/16 X 3/16 X 1.38
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.41
CYCLO® 6000 Speed Reducers
Dimensions Vertical F-Flange Mount, C-Face, Overhead Drive
Single Reduction
CVFJ-6130/5Y 6180/5Y (cont.)
All dimensions are in inches
Model
CVFJ
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
6130/5Y
56C~145TC
5.87
4.500
6.69
-
0.43
4
18.64
2.63
0.47
4.21
133
6140/5Y
56C~145TC
5.87
4.500
6.69
-
0.43
4
19.77
2.63
0.47
4.21
151
6170/5Y
6180/5Y
56C~145TC
5.87
4.500
6.69
-
0.43
4
20.85
2.63
0.47
4.21
260
182TC~184TC
7.25
8.500
8.98
0.22
0.55
4
21.59
3.37
0.57
5.71
265
182TC~184TC
7.25
8.500
8.98
0.22
0.55
4
27.94
3.38
0.57
5.71
425
213TC~215TC
7.25
8.500
8.98
0.22
0.55
4
28.56
4.00
1.20
5.71
432
182TC~184TC
7.25
8.500
8.98
0.22
0.55
4
29.53
3.50
0.57
5.71
588
213TC~215TC
7.25
8.500
8.98
0.22
0.55
4
30.03
4.00
1.10
5.71
593
Speed
Reducers
Dimensions
6160/5Y
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.41
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.42
CYCLO® 6000 Speed Reducers
Dimensions Universal F-Flange Mount, C-Face
Single Reduction
CNFJ-6060/5Y 6120/5Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNFJ
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
Model
CNFJ
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
4.42 Dimensions
B
3.1492
3.1485
3.1492
3.1485
3.7397
3.7388
4.1334
4.1325
4.1334
4.1325
4.5271
4.5262
5.5113
5.5103
U*
0.500
0.750
0.875
1.125
1.125
1.250
1.500
C
G
H
NO.
M
N
P
Q
S1
AH
5.71
0.16
0.26
6
2.68
60
4.33
M6
0.83
3.86
5.94
0.16
0.26
6
2.91
60
4.33
M6
0.83
3.86
7.05
0.20
0.35
8
3.58
22.5
5.28
M8
1.06
4.65
7.95
0.24
0.35
8
4.49
22.5
5.91
M8
1.14
5.28
8.19
0.24
0.35
8
4.49
22.5
5.91
M8
1.10
5.28
8.58
0.24
0.35
8
4.65
22.5
6.38
M8
1.02
5.75
10.20
0.55
0.43
6
5.47
60
8.03
M10
1.30
7.09
V
0.98
1.18
1.38
1.38
1.38
1.77
2.17
Low Speed Shaft
S
10-32UNF
12-28UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
L1
0.63
0.63
0.63
0.79
0.79
0.79
0.79
Key
1/8 X 1/8 X .79
3/16 X 3/16 X 1.06
3/16 X 3/16 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
XU*
0.500
0.500
0.500
0.625
0.625
0.625
0.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
1.38
3/16 X 3/16 X 1.02
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.43
CYCLO® 6000 Speed Reducers
Dimensions Universal F-Flange Mount, C-Face
Single Reduction
CNFJ-6060/5Y 6120/5Y (cont.)
All dimensions are in inches
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
42C
48C
56C~145TC
42C
48C
56C~145TC
42C
48C
56C~145TC
42C
48C
56C~145TC
48C
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
3.75
3.75
5.88
3.75
3.75
5.88
3.75
3.75
5.88
3.75
3.75
5.88
3.75
5.88
7.25
5.88
7.25
5.88
7.25
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
3.000
4.500
8.500
4.500
8.500
4.500
8.500
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
4.33
6.69
8.98
6.69
8.98
6.69
8.98
0.22
0.22
0.22
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.43
0.55
0.43
0.55
0.43
0.55
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
7.49
7.87
8.27
7.72
8.10
8.50
8.79
9.17
9.63
9.73
10.11
10.58
10.35
10.81
11.64
11.20
12.03
12.82
13.57
1.78
2.16
2.56
1.78
2.16
2.56
1.74
2.12
2.58
1.78
2.16
2.63
2.16
2.63
3.45
2.62
3.44
2.63
3.37
0.47
0.47
0.47
0.47
0.47
0.47
0.39
0.39
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
2.44
2.44
3.15
2.44
2.44
3.15
2.44
2.44
4.21
2.44
2.44
4.21
2.44
4.21
5.43
4.21
5.43
4.21
5.43
9.6
9.8
12
9.6
9.8
12
22
22
23
23
24
26
26
28
32
31
36
54
57
Speed
Reducers
Dimensions
Model
CNFJ
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.43
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.44
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
Single Reduction
CHFJ-6130/5Y 6215Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHFJ
Dimensions
Speed
Reducers
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
Model
CHFJ
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
4.44 Dimensions
B
6.4955
6.4945
6.4955
6.4945
7.8734
7.8723
9.8419
9.8408
11.0230
11.0217
12.5977
12.5963
14.1725
14.1711
15.3536
15.3522
U*
1.875
1.875
2.250
2.750
3.125
3.625
3.875
4.250
C
G
H
NO.
M
N
P
P1
Q
S1
AH
X
12.64
0.63
0.43
6
7.01
60
9.06
9.06
M10
1.22
8.07
8.19
13.43
0.63
0.43
6
7.80
60
9.06
9.06
M10
1.22
8.07
8.19
16.26
0.39
0.55
6
8.74
30
11.81
12.52
M12
1.38
10.63
8.98
18.78
0.47
0.55
8
10.31
22.5
13.39
14.25
M12
1.61
11.81
9.57
20.75
0.47
0.55
8
11.77
22.5
14.57
15.35
M12
1.50
12.99
10.16
24.41
0.39
0.55
12
14.37
15
16.93
17.76
M12
1.61
14.96
11.22
26.69
0.79
0.71
12
16.14
15
17.64
18.54
M16
2.20
15.94
-
27.87
0.79
0.81
12
16.65
15
19.09
19.96
M18
2.20
17.32
-
V
2.76
3.54
3.54
3.54
4.33
5.31
6.50
6.50
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
L1
0.71
0.71
0.71
0.94
0.94
1.34
1.34
1.34
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
XU*
0.875
0.875
1.125
1.375
1.500
1.750
1.750
1.875
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
2.17
5/16 X 5/16 X 2.16
2.56
3/8 X 3/8 X 2.56
2.76
3/8 X 3/8 X 2.76
3.23
3/8 X 3/8 X 3.23
3.23
1/2 X 1/2 X 3.23
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.45
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
Single Reduction
CHFJ-6130/5Y 6215Y (cont.)
All dimensions are in inches
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
56C~145TC
182TC~184TC
213~215TC
254~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
364TC~365TC
364TSC~365TSC
254TC~256TC
284TC~286TC
324TC~326TC
364TC~365TC
364TSC~365TSC
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
11.00
7.25
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
11.00
11.00
7.25
9.00
11.00
11.00
11.00
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
12.500
12.500
8.500
10.500
12.500
12.500
12.500
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
13.86
8.98
8.98
8.98
11.10
13.86
8.98
8.98
11.10
13.86
9.84
9.84
11.10
13.86
13.86
13.86
9.84
11.10
13.86
13.86
13.86
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
0.71
0.71
0.55
0.55
0.71
0.71
0.71
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
8
4
4
4
8
8
15.26
16.01
16.64
17.57
16.05
16.80
17.43
18.35
18.89
19.63
20.26
21.01
22.16
22.78
23.53
24.22
24.78
24.25
24.75
25.50
26.19
27.25
28.54
29.16
29.85
30.91
30.79
31.43
32.06
33.17
33.92
31.79
32.63
33.26
34.37
35.12
32.99
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.75
3.38
4.00
4.75
5.44
6.00
3.50
4.00
4.75
5.44
6.50
4.13
4.75
5.44
6.50
4.10
4.73
5.36
6.48
7.22
5.10
4.75
5.38
6.50
7.24
5.12
0.47
0.47
1.10
0.57
0.47
0.47
1.10
0.57
0.47
0.57
1.20
0.57
0.57
1.20
0.57
0.57
0.57
0.57
1.07
0.57
0.57
0.57
1.29
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
4.21
5.43
5.43
5.08
4.21
5.43
5.43
5.08
4.21
5.71
5.71
5.71
5.71
5.71
5.71
7.87
7.87
5.71
5.71
5.71
7.87
7.87
5.71
5.71
7.87
7.87
5.91
5.91
6.89
8.27
8.27
8.27
5.91
6.89
8.27
8.46
8.46
92
95
103
104
94
97
105
106
187
192
199
194
250
257
252
263
283
337
342
351
345
349
500
493
502
527
560
560
566
592
590
582
753
758
783
776
772
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CHFJ
Dimensions 4.45
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.46
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
Single Reduction
CHFJ-6225Y 6265Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHFJ
6225Y
6235Y
6245Y
6255Y
6265Y
B
16.5346
16.5331
17.9126
17.9110
19.6843
19.6827
21.2590
21.2572
22.4401
C
G
H
NO.
M
N
P
P1
Q
S1
AH
X
29.61
0.79
0.87
12
17.87
15
20.71
21.61
M20
2.52
18.70
-
33.03
0.79
0.87
12
19.88
15
22.13
23.27
M20
2.56
20.08
-
34.53
0.98
1.06
12
20.83
15
24.17
25.08
M24
2.56
22.05
-
40.94
1.18
1.06
12
24.25
15
26.38
27.68
M24
3.58
24.02
-
45.28
1.57
1.34
12
28.03
15
28.98
30.39
M30
3.35
25.98
-
Dimensions
Speed
Reducers
Model
CHFJ
6225Y
6235Y
6245Y
6255Y
6265Y
Model
CHFJ
6225Y
6235Y
6245Y
6255Y
6265Y
4.46 Dimensions
U*
4.625
5.000
5.500
6.250
6.625
V
6.50
7.87
7.87
9.45
11.81
Low Speed Shaft
S
3/4-10UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.34
1.61
1.61
1.93
1.93
Key
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
High Speed Shaft
XV
3.23
4.13
4.13
5.12
5.12
XU*
2.125
2.250
2.500
3.125
3.125
Key
1/2 X 1/2 X 3.23
1/2 X 1/2 X 4.13
5/8 X 5/8 X 4.13
3/4 X 3/4 X 5.12
3/4 X 3/4 X 5.12
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
254TC~256TC
284TC~286TC
324TC~326TC
364TC~365TC
364TSC~365TSC
404TC~405TC
404TSC~405TSC
324TC~326TC
364TC~365TC
404TC~405TC
324TC~326TC
364TC~365TC
404TC~405TC
364TC~365TC
404TC~405TC
364TC~365TC
404TC~405TC
7.25
9.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
8.500
10.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
11.10
11.10
13.86
13.86
13.86
13.86
13.86
13.86
13.86
13.86
14.57
13.86
13.86
13.86
13.86
15.75
15.75
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.55
0.55
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
4
4
4
8
8
8
8
4
4
8
4
8
8
8
8
8
8
34.37
35.00
36.11
36.85
34.74
38.23
35.24
39.57
39.57
41.69
41.06
41.77
43.15
48.20
49.57
52.52
53.91
4.76
5.39
6.50
7.24
5.14
8.63
5.63
6.54
6.54
8.66
6.54
7.24
8.63
7.25
8.63
7.24
8.63
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
5.51
6.30
8.46
8.46
8.46
8.46
8.46
8.66
8.66
8.46
8.27
8.46
8.46
9.45
9.45
9.45
9.45
907
906
917
919
911
926
913
1116
1116
1138
1431
1424
1418
2032
2063
2596
2627
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.47
CYCLO® 6000 Speed Reducers
Dimensions Universal F-Flange Mount
Double Reduction
CNF-6060/5DAY 6120/5DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
Model
CNF
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
B
C
G
H
NO.
M
N
P
Q
S1
AH
3.1492
3.1485
3.1492
3.1485
4.1334
4.1325
4.1334
4.1325
5.5113
5.5103
7.01
0.16
0.26
6
2.68
60
4.33
M6
0.83
3.86
7.24
0.16
0.26
6
2.91
60
4.33
M6
0.83
3.86
9.57
0.24
0.35
8
4.49
22.5
5.91
M8
1.14
5.28
10.12
0.24
0.35
8
4.49
22.5
5.91
M8
1.10
5.28
12.28
0.55
0.43
6
5.47
60
8.03
M10
1.30
7.09
U*
0.500
0.750
1.125
1.125
1.500
V
0.98
1.18
1.38
1.38
2.17
Low Speed Shaft
S
10-32UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
Cyclo® 6000 Series
L1
0.63
0.63
0.79
0.79
0.79
Key
1/8 X 1/8 X .79
3/16 X 3/16 X 1.06
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
3/8 X 3/8 X 1.77
XU*
0.500
0.500
0.500
0.500
0.625
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions
Model
CNF
Speed
Reducers
Approx.
Wt. (lb.)
10
10
22
26
55
Dimensions 4.47
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.48
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount
Double Reduction
CHF-6130/5DAY 6180/5DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHF
6130/5DAY
6130/5DBY
Speed
Reducers
Dimensions
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
6160/5DCY
6170/5DCY
6180/5DBY
Model
CHF
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
6160/5DCY
6170/5DCY
6180/5DBY
4.48 Dimensions
B
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
7.8734
7.8723
9.8419
9.8408
11.0230
11.0217
U*
1.875
1.875
1.875
1.875
1.875
1.875
2.250
2.750
3.125
C
G
H
NO.
M
N
P
Q
S1
AH
X
13.66
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
14.29
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
14.53
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
14.45
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
15.08
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
15.31
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
18.19
0.39
0.55
6
8.74
30
11.81
M12
1.38
10.63
8.98
20.04
0.47
0.55
8
10.31
22.5
13.39
M12
1.61
11.81
9.57
22.72
0.47
0.55
8
11.77
22.5
14.57
M12
1.50
12.99
10.16
V
2.76
2.76
2.76
3.54
3.54
3.54
3.54
3.54
4.33
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
L1
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.94
0.94
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
XU*
0.500
0.625
0.625
0.500
0.625
0.625
0.750
0.750
0.875
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
1.38
3/16 X 3/16 X1.02
1.38
3/16 X 3/16 X1.02
1.57
3/16 X 3/16 X1.38
Approx.
Wt. (lb.)
80
86
88
80
86
89
181
232
322
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.49
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount
Double Reduction
CHF-6190/5DAY 6225DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
B
12.5977
12.5963
12.5977
6190/5DBY
12.5963
14.1725
6205DAY
14.1711
14.1725
6205DBY
14.1711
15.3536
6215DAY
15.3522
15.3536
6215DBY
15.3522
16.5346
6225DAY
16.5331
16.5346
6225DBY
16.5331
6190/5DAY
Model
CHF
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
6225DAY
6225DBY
U*
3.625
3.625
3.875
3.875
4.250
4.250
4.625
4.625
C
G
H
NO.
M
N
P
Q
S1
AH
X
24.76
0.39
0.55
12
14.37
15
16.93
M12
1.61
14.96
11.22
25.71
0.39
0.55
12
14.37
15
16.93
M12
1.61
14.96
11.22
Speed
Reducers
26.38
0.79
0.71
12
16.14
15
17.64
M16
2.20
15.94
-
27.76
0.79
0.71
12
16.14
15
17.64
M16
2.20
15.94
-
28.78
0.79
0.81
12
16.65
15
19.09
M18
2.20
17.32
-
30.71
0.79
0.81
12
16.65
15
19.09
M18
2.20
17.32
-
30.43
0.79
0.87
12
17.87
15
20.71
M20
2.52
18.70
-
33.86
0.79
0.87
12
17.87
15
20.71
M20
2.52
18.70
-
V
5.31
5.31
6.50
6.50
6.50
6.50
6.50
6.50
Low Speed Shaft
S
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
Cyclo® 6000 Series
L1
1.34
1.34
1.34
1.34
1.34
1.34
1.34
1.34
Key
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 6.50
XU*
0.750
0.875
0.750
0.875
0.875
1.125
0.875
1.375
High Speed Shaft
XV
Key
1.38
3/16 X 3/16 X1.02
1.57
3/16 X 3/16 X1.38
1.38
3/16 X 3/16 X1.02
1.57
3/16 X 3/16 X1.38
1.57
3/16 X 3/16 X1.38
1.77
1/4 X 1/4 X 1.77
1.57
3/16 X 3/16 X1.38
2.17
5/16 X 5/16 X 2.16
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions
Model
CHF
Approx.
Wt. (lb.)
443
452
478
501
675
723
787
891
Dimensions 4.49
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.50
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount
Double Reduction
CHF-6235DAY 6265DAY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHF
6235DAY
6235DBY
6245DAY
6245DBY
Dimensions
Speed
Reducers
6255DAY
6255DBY
6265DAY
Model
CHF
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
4.50 Dimensions
B
17.9126
17.9110
17.9126
17.9110
19.6843
19.6827
19.6843
19.6827
21.2590
21.2572
21.2590
21.2572
22.4401
22.4383
U*
5.000
5.000
5.500
5.500
6.250
6.250
6.625
C
G
H
NO.
M
N
P
Q
S1
AH
X
34.76
0.79
0.87
12
19.88
15
22.13
M20
2.56
20.08
-
36.93
0.79
0.87
12
19.88
15
22.13
M20
2.56
20.08
-
36.26
0.98
1.06
12
20.83
15
24.17
M24
2.56
22.05
-
38.39
0.98
1.06
12
20.83
15
24.17
M24
2.56
22.05
-
42.56
1.18
1.06
12
24.25
15
26.38
M24
3.58
24.02
-
44.61
1.18
1.06
12
24.25
15
26.38
M24
3.58
24.02
-
48.94
1.57
1.34
12
28.03
15
28.98
M30
3.35
25.98
-
V
7.87
7.87
7.87
7.87
9.45
9.45
11.81
Low Speed Shaft
S
1-8UNC
1-8UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.61
1.61
1.61
1.61
1.93
1.93
1.93
Key
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.80
XU*
1.125
1.500
1.125
1.500
1.375
1.750
1.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
2.17
5/16 X 5/16 X 2.16
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
Approx.
Wt. (lb.)
1032
1103
1266
1330
1868
2042
2580
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.51
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Dimensions
Speed
Reducers
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.51
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.52
CYCLO® 6000 Speed Reducers
Dimensions Vertical F-Flange Mount
Double Reduction
CVF-6130/5DAY CVF-6140/5DCY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CVF
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
Model
CVF
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
4.52 Dimensions
B
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
U*
1.875
1.875
1.875
1.875
1.875
1.875
C
G
H
NO.
M
N
P
Q
S1
AH
X
Y
13.66
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
-
14.29
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
-
14.53
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
-
14.45
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
-
15.08
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
-
15.31
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
-
V
2.40
2.40
2.40
3.19
3.19
3.19
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
L1
0.71
0.71
0.71
0.71
0.71
0.71
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
XU*
0.500
0.625
0.625
0.500
0.625
0.625
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
Approx.
Wt. (lb.)
80
86
88
80
86
89
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.53
CYCLO® 6000 Speed Reducers
Dimensions Vertical F-Flange Mount
Double Reduction
CVF-6160/5DCY 6190/5DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
Model
CVF
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
B
7.8734
7.8723
9.8419
9.8408
11.0230
11.0217
12.5977
12.5963
12.5977
12.5963
U*
2.250
2.750
3.125
3.625
3.625
C
G
H
NO.
M
N
P
Q
S1
AH
X
Y
18.19
0.39
0.55
6
8.74
30
11.81
M12
1.38
10.63
7.72
9.06
20.04
0.47
0.55
8
10.31
22.5
13.39
M12
1.61
11.81
8.58
10.24
22.72
0.47
0.55
8
11.77
22.5
14.57
M12
1.50
12.99
9.17
10.24
24.76
0.39
0.55
12
14.37
15
16.93
M12
1.61
14.96
10.04
10.24
25.71
0.39
0.55
12
14.37
15
16.93
M12
1.61
14.96
10.04
10.24
V
3.15
3.31
3.94
4.92
4.92
Low Speed Shaft
S
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
Cyclo® 6000 Series
L1
0.71
0.94
0.94
1.34
1.34
Key
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
XU*
0.750
0.750
0.875
0.750
0.875
High Speed Shaft
XV
1.38
1.38
1.57
1.38
1.57
Key
3/16 X 3/16 X1.02
3/16 X 3/16 X1.02
3/16 X 3/16 X1.38
3/16 X 3/16 X1.02
3/16 X 3/16 X1.38
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CVF
Approx.
Wt. (lb.)
181
232
322
443
452
Dimensions 4.53
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.54
CYCLO® 6000 Speed Reducers
Dimensions Vertical F-Flange Mount, C-Face, Overhead Drive
Double Reduction
CVFJ-6130/5DCY 6180/5DBY
56C~145TC ADAPTER
BD
AK
X
VIEW X-X
A
F
BF HOLE DIA
R NUMBER OF HOLES
AJ BOLT CIRCLE
182TC~215TC ADAPTER
BD
AK
X
MIN I.D.
XU
Z
MIN I.D.
XJ
XV
BB
Z
CE
F/2
P
G
H (4 HOLES)
F/2
A F
L1 V
T
CE
C
B
M
V1
T
*Shaft Tolerances
U
VIEW Y-Y
S
Y
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Y
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CVFJ
6130/5DCY
6140/5DBY
6160/5DCY
6170/5DCY
6180/5DBY
Model
DVX
35DVX
40DVX
50DVX
60DVX
70DVX
Model
CVFJ
6130/5DCY
6140/5DBY
6160/5DCY
6170/5DCY
6180/5DBY
Model
DVX
35DVX
40DVX
50DVX
60DVX
70DVX
Model
Motor
CVFJ
Frame
6130/5DCY 56C~145TC
6140/5DBY 56C~145TC
56C~145TC
6160/5DCY
182TC~184TC
56C~145TC
6170/5DCY
182TC~184TC
56C~145TC
6180/5DBY 182TC~184TC
213TC~215TC
4.54 Dimensions
A
B
C
F
G
H
M
P
12.50
14.00
16.00
19.50
22.00
6.14
6.14
6.77
8.50
9.06
17.91
18.80
20.15
25.82
28.00
10.50
12.00
14.00
17.00
19.00
0.88
1.00
1.46
1.65
1.75
0.56
0.43
0.81
0.94
1.12
9.50
10.50
10.50
15.50
15.50
9.06
9.06
11.81
13.39
14.57
T
U
V
V1
S
L1
Key
XU
XV
Key
0.38
0.50
0.75
0.75
1.00
1.6250
1.6875
2.1875
2.4375
2.9375
4.50
5.50
5.50
7.50
7.50
5.76
6.89
9.22
5/16-18UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
1.00
1.00
1.00
1.00
1.00
3/8 X 3/8 X 3.70
3/8 X 3/8 X 4.69
1/2 X 1/2 X 5.24
5/8 X 5/8 X 6.50
3/4 X 3/4 X 6.50
0.625
0.625
0.750
0.750
0.875
0.98
0.98
1.38
1.38
1.57
3/16 X 3/16 X .75
3/16 X 3/16 X .75
3/16 X 3/16 X .98
3/16 X 3/16 X .98
3/16 X 3/16 X 1.38
AJ
AK
BD
BB
BF
R
CE
XJ
Z
5.87
5.87
5.87
7.25
5.87
7.25
5.87
7.25
7.25
4.500
4.500
4.500
8.500
4.500
8.500
4.500
8.500
8.500
6.69
6.69
6.69
8.98
6.69
8.98
6.69
8.98
8.98
0.22
0.22
0.22
0.22
0.43
0.43
0.43
0.55
0.43
0.55
0.43
0.55
0.55
4
4
4
4
4
4
4
4
4
20.53
21.42
22.77
23.92
28.45
29.19
30.62
31.37
32.00
2.63
2.63
2.63
3.37
2.63
3.37
2.63
3.37
4.00
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
1.10
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Min.
I.D.
4.21
4.21
4.21
5.43
4.21
5.43
4.21
5.43
5.43
Approx
Wt. (lb)
136
150
264
267
416
420
585
589
596
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.55
CYCLO® 6000 Speed Reducers
Dimensions Universal F-Flange Mount, C-Face
Double Reduction
CNFJ-6060/5DAY 6120/5DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
3.250 (3 1/4) through 4.625 (4 5/8)
4.750 (4 3/4) through 7.000 (7)
Model
CNFJ
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
Model
CNFJ
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
Model
CNFJ
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
B
3.1492
3.1485
3.1492
3.1485
4.1334
4.1325
4.1334
4.1325
5.5113
5.5103
C
G
H
NO.
M
N
P
Q
S1
AH
7.01
0.16
0.26
6
2.68
60
4.33
M6
0.83
3.86
7.24
0.16
0.26
6
2.91
60
4.33
M6
0.83
3.86
9.57
0.24
0.35
8
4.49
22.5
5.91
M8
1.14
5.28
10.12
0.24
0.35
8
4.49
22.5
5.91
M8
1.10
5.28
12.28
0.55
0.43
6
5.47
60
8.03
M10
1.30
7.09
U*
0.500
0.750
1.125
1.125
1.500
V
0.98
1.18
1.38
1.38
2.17
Low Speed Shaft
S
10-32UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
L1
0.63
0.63
0.79
0.79
0.79
Key
1/8 X 1/8 X .79
3/16 X 3/16 X 1.06
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
3/8 X 3/8 X 1.77
Speed
Reducers
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
XU*
0.500
0.500
0.500
0.500
0.625
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
42C
48C
42C
48C
42C
48C
56C~145TC
42C
48C
56C~145TC
42C
48C
56C~145TC
3.75
3.75
3.75
3.75
3.75
3.75
5.88
3.75
3.75
5.88
3.75
3.75
5.88
3.000
3.000
3.000
3.000
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
4.33
4.33
4.33
4.33
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
-
0.28
0.28
0.28
0.28
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
4
4
4
4
4
4
4
4
4
4
4
4
4
8.79
9.17
9.02
9.40
11.35
11.72
12.13
11.90
12.28
12.68
14.06
14.44
14.91
1.78
2.16
1.78
2.16
1.78
2.16
2.56
1.78
2.16
2.56
1.78
2.16
2.63
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
2.44
2.44
2.44
2.44
2.44
2.44
3.15
2.44
2.44
3.15
2.44
2.44
4.21
13
13
13
13
25
25
28
29
30
32
60
60
62
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions
All dimensions are in inches
+0.0000/-0.0007
+0.0000/-0.0009
+0.0000/-0.0010
Dimensions 4.55
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.56
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
Double Reduction
CHFJ-6130/5DAY 6160/5DCY
*Shaft Tolerances
Shaft Nominal Diameter (inches)
Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
0.750 (3/4) through 1.125 (1 1/8)
1.250 (1 1/4) through 1.875 (1 7/8)
2.000 (2) through 3.125 (3 1/8)
3.250 (3 1/4) through 4.625 (4 5/8)
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0004
+0.0000/-0.0005
+0.0000/-0.0006
+0.0000/-0.0007
+0.0000/-0.0009
+0.0000/-0.0010
All dimensions are in inches
Model
CHFJ
6130/5DAY
6130/5DBY
Dimensions
Speed
Reducers
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
6160/5DCY
Model
CHFJ
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
6160/5DCY
4.56 Dimensions
B
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
6.4955
6.4945
7.8734
7.8723
U*
1.875
1.875
1.875
1.875
1.875
1.875
2.250
C
G
H
NO.
M
N
P
Q
S1
AH
X
13.66
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
14.29
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
14.53
0.63
0.43
6
7.01
60
9.06
M10
1.22
8.07
-
14.45
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
15.08
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
15.31
0.63
0.43
6
7.80
60
9.06
M10
1.22
8.07
-
18.19
0.39
0.55
6
8.74
30
11.81
M12
1.38
10.63
8.98
V
2.76
2.76
2.76
3.54
3.54
3.54
3.54
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
L1
0.71
0.71
0.71
0.71
0.71
0.71
0.71
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
XU*
0.500
0.625
0.625
0.500
0.625
0.625
0.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
1.38
3/16 X 3/16 X1.02
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.57
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
Double Reduction
CHFJ-6130/5DAY 6160/5DCY (cont.)
All dimensions are in inches
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
6160/5DCY
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
42C
48C
56C~143TC
42C
48C
56C~143TC
48C
56C~145TC
42C
48C
56C~143TC
42C
48C
56C~145TC
48C
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
3.75
3.75
5.88
3.75
3.75
5.88
3.75
5.87
3.75
3.75
5.88
3.75
3.75
5.88
3.75
5.88
7.25
5.88
7.25
3.000
3.000
4.500
3.000
3.000
4.500
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
3.000
4.500
8.500
4.500
8.500
4.33
4.33
6.69
4.33
4.33
6.69
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
4.33
6.69
8.98
6.69
8.98
0.22
0.22
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.43
0.55
0.43
0.55
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
15.44
15.82
16.22
16.07
16.45
16.92
16.69
17.15
16.23
16.61
17.01
16.86
17.24
17.70
17.47
17.94
18.98
20.81
21.56
1.78
2.16
2.56
1.78
2.16
2.63
2.16
2.63
1.78
2.16
2.56
1.78
2.16
2.63
2.16
2.63
3.67
2.62
3.37
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
2.44
2.44
4.21
2.44
2.44
4.21
2.44
4.21
2.44
2.44
4.21
2.44
2.44
4.21
2.44
4.21
5.43
4.21
5.43
84
84
86
90
92
94
93
95
84
84
86
91
91
93
95
96
100
191
194
Speed
Reducers
Dimensions
Model
CHFJ
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.57
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.58
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
Double Reduction
CHFJ-6170/5DCY 6215DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHFJ
6170/5DCY
6180/5DBY
Dimensions
Speed
Reducers
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
Model
CHFJ
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
4.58 Dimensions
B
9.8419
9.8408
11.0230
11.0217
12.5977
12.5963
12.5977
12.5963
14.1725
14.1711
14.1725
14.1711
15.3536
15.3522
15.3536
15.3522
U*
2.750
3.125
3.625
3.625
3.875
3.875
4.250
4.250
C
G
H
NO.
M
N
P
Q
S1
AH
X
20.04
0.47
0.55
8
10.31
22.5
13.39
M12
1.61
11.81
9.57
22.72
0.47
0.55
8
11.77
22.5
14.57
M12
1.50
12.99
10.16
24.76
0.39
0.55
12
14.37
15
16.93
M12
1.61
14.96
11.22
25.71
0.39
0.55
12
14.37
15
16.93
M12
1.61
14.96
11.22
26.38
0.79
0.71
12
16.14
15
17.64
M16
2.20
15.94
-
27.76
0.79
0.71
12
16.14
15
17.64
M16
2.20
15.94
-
28.78
0.79
0.81
12
16.65
15
19.09
M18
2.20
17.32
-
30.71
0.79
0.81
12
16.65
15
19.09
M18
2.20
17.32
-
V
3.54
4.33
5.31
5.31
6.50
6.50
6.50
6.50
Low Speed Shaft
S
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
L1
0.94
0.94
1.34
1.34
1.34
1.34
1.34
1.34
Key
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
XU*
0.750
0.875
0.750
0.875
0.750
0.875
0.875
1.125
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
1.38
1.57
1.38
1.57
1.38
1.57
1.57
1.77
Key
3/16 X 3/16 X1.02
3/16 X 3/16 X1.38
3/16 X 3/16 X1.02
3/16 X 3/16 X1.38
3/16 X 3/16 X1.02
3/16 X 3/16 X1.38
3/16 X 3/16 X1.38
1/4 X 1/4 X 1.77
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.59
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
Double Reduction
CHFJ-6170/5DCY 6215DBY (cont.)
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
5.88
7.25
5.88
7.25
7.25
7.25
5.88
7.25
5.88
7.25
7.25
7.25
5.88
7.25
5.87
7.25
7.25
7.25
5.87
7.25
7.25
7.25
5.87
7.25
7.25
7.25
4.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
6.69
8.98
6.69
8.98
8.98
8.98
6.69
8.98
6.69
8.98
8.98
8.98
6.69
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.55
0.43
0.54
0.54
0.55
0.43
0.55
0.43
0.54
0.54
0.55
0.43
0.55
0.43
0.54
0.54
0.55
0.43
0.54
0.54
0.55
0.43
0.55
0.55
0.55
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
22.67
23.41
25.34
26.09
26.72
27.65
27.39
28.13
28.33
29.08
29.71
30.64
29.00
29.75
30.38
31.13
31.76
32.69
31.41
32.15
32.78
33.71
33.33
34.08
34.71
35.46
2.63
3.37
2.63
3.37
4.00
4.93
2.63
3.37
2.63
3.37
4.00
4.93
2.63
3.37
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.75
0.47
0.47
0.47
0.47
1.10
0.57
0.47
0.47
0.47
0.47
1.10
0.57
0.47
0.47
0.47
0.47
1.10
0.57
0.47
0.47
1.10
0.57
0.47
0.57
1.20
0.57
4.21
5.43
4.21
5.43
5.43
5.08
4.21
5.43
4.21
5.43
5.43
5.08
4.21
5.43
4.21
5.43
5.43
5.08
4.21
5.43
5.43
5.08
4.21
5.71
5.71
5.71
241
245
334
338
345
346
453
456
464
468
475
477
488
492
513
516
524
525
687
691
698
699
765
769
777
772
Speed
Reducers
Dimensions
Model
CHFJ
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.59
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.60
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
*Shaft Tolerances
Double Reduction
CHFJ-6225DAY 6265DAY
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CHFJ
6225DAY
6225DBY
Dimensions
Speed
Reducers
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
Model
CHFJ
6225DAY
6225DBY
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
4.60 Dimensions
B
16.5346
16.5331
16.5346
16.5331
17.9126
17.9110
17.9126
17.9110
19.6843
19.6827
19.6843
19.6827
21.2590
21.2572
21.2590
21.2572
22.4401
22.4383
U*
4.625
4.625
5.000
5.000
5.500
5.500
6.250
6.250
6.625
C
G
H
NO.
M
N
P
Q
S1
AH
X
30.43
0.79
0.87
12
17.87
15
20.71
M20
2.52
18.70
-
33.86
0.79
0.87
12
17.87
15
20.71
M20
2.52
18.70
-
34.76
0.79
0.87
12
19.88
15
22.13
M20
2.56
20.08
-
36.93
0.79
0.87
12
19.88
15
22.13
M20
2.56
20.08
-
36.26
0.98
1.06
12
20.83
15
24.17
M24
2.56
22.05
-
38.39
0.98
1.06
12
20.83
15
24.17
M24
2.56
22.05
-
42.56
1.18
1.06
12
24.25
15
26.38
M24
3.58
24.02
-
44.61
1.18
1.06
12
24.25
15
26.38
M24
3.58
24.02
-
48.94
1.57
1.34
12
28.03
15
29.98
M30
3.35
25.98
-
V
6.50
6.50
7.87
7.87
7.87
7.87
9.45
9.45
11.81
Low Speed Shaft
S
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.34
1.34
1.61
1.61
1.61
1.61
1.93
1.93
1.93
Key
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.81
XU*
0.875
1.375
1.125
1.500
1.125
1.500
1.375
1.750
1.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X1.38
2.17
5/16 X 5/16 X 2.16
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
2.17
5/16 X 5/16 X 2.16
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.61
CYCLO® 6000 Speed Reducers
Dimensions Horizontal F-Flange Mount, C-Face
Double Reduction
CHFJ-6225DAY 6265DAY (cont.)
All dimensions are in inches
6225DAY
6225DBY
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
11.00
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
11.00
7.25
7.25
7.25
9.00
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
12.500
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
8.500
10.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
13.86
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
13.86
8.98
8.98
8.98
11.10
8.98
8.98
11.10
13.86
8.98
8.98
11.10
13.86
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.54
0.54
0.55
0.59
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.59
0.55
0.55
0.55
0.71
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
33.06
33.81
34.43
35.36
37.24
37.86
38.61
39.30
37.39
38.14
38.76
39.52
40.43
40.93
41.68
42.37
43.43
38.89
39.63
40.26
41.01
41.89
42.39
43.14
43.82
44.89
45.94
46.56
47.31
48.00
48.73
49.36
50.04
51.11
53.06
53.69
54.37
55.44
2.63
3.37
4.00
4.93
3.38
4.00
4.75
5.44
2.62
3.37
4.00
4.75
3.50
4.00
4.75
5.44
6.50
2.63
3.37
4.00
4.75
3.50
4.00
4.75
5.44
6.50
3.38
4.00
4.75
5.44
4.13
4.75
5.44
6.50
4.13
4.75
5.44
6.50
0.47
0.47
1.10
0.57
0.57
1.20
0.57
0.57
0.47
0.57
1.20
0.57
0.57
1.07
0.57
0.57
0.57
0.47
0.57
1.20
0.57
0.57
1.07
0.57
0.57
0.57
0.57
1.20
0.57
0.57
1.29
0.57
0.57
0.57
1.29
0.57
0.57
0.57
4.21
5.43
5.43
5.08
5.71
5.71
5.71
7.87
4.21
5.71
5.71
5.71
5.71
5.71
5.71
7.87
7.87
4.21
5.71
5.71
5.71
5.71
5.71
5.71
7.87
7.87
5.71
5.71
5.71
7.87
5.71
5.71
7.87
7.87
5.71
5.71
7.87
7.87
799
803
810
812
929
935
931
942
1074
1078
1085
1080
1150
1156
1164
1159
1163
1307
1312
1319
1314
1377
1383
1391
1386
1390
1906
1912
1908
1919
2112
2105
2113
2139
2650
2643
2652
2677
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CHFJ
Dimensions 4.61
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.62
CYCLO® 6000 Speed Reducers
Dimensions Universal V-Flange Mount
Single Reduction
CNV-6060/5Y 6120/5Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CNV
A
6060/5Y
4.72
6070/5Y
6.30
6080/5Y
6.30
6090/5Y
6.30
6100/5Y
6.30
6110/5Y
8.27
6120/5Y
8.27
Dimensions
Speed
Reducers
Model
CNV
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
4.62 Dimensions
U*
0.500
0.750
0.875
1.125
1.125
1.250
1.500
B
3.1484
3.1466
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
5.5101
5.5076
5.5101
5.5076
V
0.98
1.18
1.38
1.38
1.38
1.77
2.17
C
G
H
NO.
M
O
P
AH
5.71
0.31
0.35
6
1.34
-
0.12
4.02
5.94
0.35
0.43
4
1.65
-
0.12
5.28
7.05
0.35
0.43
4
1.89
-
0.12
5.28
7.95
0.35
0.43
4
1.89
4.21
0.12
5.28
8.19
0.35
0.43
4
1.89
4.21
0.12
5.28
8.58
0.43
0.43
6
2.28
4.57
0.16
7.09
10.20
0.51
0.43
6
2.72
5.39
0.16
7.09
Low Speed Shaft
S
10-32UNF
12-28UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
L1
0.63
0.63
0.63
0.79
0.79
0.79
0.79
Key
1/8 X 1/8 X 0.79
3/16 X 3/16 X 1.06
3/16 X 3/16 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
XU*
0.500
0.500
0.500
0.625
0.625
0.625
0.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
1.38
3/16 X 3/16 X 1.02
Approx.
Wt. (lb.)
8
10
18
20
24
29
51
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.63
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount
Single Reduction
CVV-6130/5Y 6140/5Y
*Shaft Tolerances
All dimensions are in inches
Model
CVV
A
6130/5Y
10.24
6140/5Y
10.24
Model
CVV
6130/5Y
6140/5Y
U*
1.875
1.875
B
7.8720
7.8692
7.8720
7.8692
V
2.40
3.19
C
G
H
NO.
M
P
AH
X
Y
12.64
0.59
0.43
6
2.99
0.16
9.06
5.98
9.17
13.43
0.59
0.43
6
3.78
0.16
9.06
5.98
9.17
Low Speed Shaft
S
L1
3/8-16UNC
0.71
3/8-16UNC
0.71
Cyclo® 6000 Series
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
XU*
0.875
0.875
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Approx.
Wt. (lb.)
93
95
Dimensions 4.63
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.64
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount
Single Reduction
CVV-6160/5Y 6275Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Dimensions
Speed
Reducers
All dimensions are in inches
Model
CVV
A
6160/5
13.39
6170/5
15.75
6180/5
16.93
6190/5
19.29
6205
17.91
6215
19.29
6225
21.06
6235
22.44
6245
25.00
6255
26.97
6265
29.53
6275
45.67
4.64 Dimensions
B
10.6277
10.6245
12.4385
12.4350
13.5802
13.5767
15.7456
15.7421
13.9739
13.9704
15.3519
15.3484
16.3359
16.3321
17.7139
17.7100
19.0918
19.0880
21.0600
21.0557
22.4380
22.4336
35.4297
35.4242
C
G
H
NO.
M
P
AH
X
Y
16.26
0.79
0.43
6
3.50
0.16
12.20
8.54
7.87
18.78
0.87
0.55
8
3.70
0.20
14.17
8.74
8.86
20.75
0.87
0.71
8
4.33
0.20
15.35
9.33
9.45
24.41
1.18
0.71
12
5.71
0.24
17.72
10.43
10.63
26.69
1.18
0.87
8
8.03
0.20
15.94
13.43
11.30
27.87
1.38
0.94
8
7.99
0.28
17.32
13.70
12.05
29.61
1.38
1.06
8
8.27
0.39
18.70
13.86
12.83
33.03
1.57
1.06
8
9.84
0.39
20.08
14.13
13.54
34.53
1.57
1.30
8
9.84
0.39
22.05
14.57
14.61
40.94
1.77
1.30
8
11.61
0.39
24.02
16.77
15.71
45.28
1.97
1.54
8
14.17
0.39
25.98
18.11
16.97
57.56
2.36
1.54
8
13.98
0.39
40.16
24.02
24.13
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.65
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount
Single Reduction
CVV-6160/5Y 6275Y (cont.)
All dimensions are in inches
6160/5
6170/5
6180/5
6190/5
6205
6215
6225
6235
6245
6255
6265
6275
U*
2.250
2.750
3.125
3.625
3.875
4.250
4.625
5.000
5.500
6.250
6.625
7.000
V
3.15
3.31
3.94
4.92
6.50
6.50
6.50
7.87
7.87
9.45
11.81
12.60
Low Speed Shaft
S
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
L1
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.61
1.61
1.93
1.93
2.05
Key
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13.0
XU*
1.125
1.375
1.500
1.750
1.750
1.875
2.125
2.250
2.500
3.125
3.125
3.500
High Speed Shaft
XV
Key
1.77
1/4 X 1/4 X 1.77
2.17
5/16 X 5/16 X 2.16
2.56
3/8 X 3/8 X 2.56
2.76
3/8 X 3/8 X 2.76
3.23
3/8 X 3/8 X 3.23
3.23
1/2 X 1/2 X 3.23
3.23
1/2 X 1/2 X 3.23
4.13
1/2 X 1/2 X 4.13
4.13
5/8 X 5/8 X 4.13
5.12
3/4 X 3/4 X 5.12
5.12
3/4 X 3/4 X 5.12
5.91
7/8 X 7/8 X 5.90
Approx.
Wt. (lb.)
174
276
331
496
536
692
873
1045
1252
1907
2481
5755
Speed
Reducers
Dimensions
Model
CVV
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.65
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.66
CYCLO® 6000 Speed Reducers
Dimensions Universal and Vertical V-Flange Mount, C-Face
Single Reduction
CNVJ-6060/5Y 6120/5Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNVJ
A
6060/5Y
4.72
6070/5Y
6.30
6080/5Y
6.30
6090/5Y
6.30
6100/5Y
6.30
6110/5Y
8.27
6120/5Y
8.27
Model
CNVJ
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
4.66 Dimensions
U*
0.500
0.750
0.875
1.125
1.125
1.250
1.500
B
3.1484
3.1466
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
5.5101
5.5076
5.5101
5.5076
V
0.98
1.18
1.38
1.38
1.38
1.77
2.17
C
G
H
NO.
M
P
AH
5.71
0.31
0.35
6
1.34
0.12
4.02
5.94
0.35
0.43
4
1.65
0.12
5.28
7.05
0.35
0.43
4
1.89
0.12
5.28
7.95
0.35
0.43
4
1.89
0.12
5.28
8.19
0.35
0.43
4
1.89
0.12
5.28
8.58
0.43
0.43
6
2.28
0.16
7.09
10.20
0.51
0.43
6
2.72
0.16
7.09
Low Speed Shaft
S
10-32UNF
12-28UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
L1
0.63
0.63
0.63
0.79
0.79
0.79
0.79
Key
1/8 X 1/8 X 0.79
3/16 X 3/16 X 1.06
3/16 X 3/16 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
XU*
0.500
0.500
0.500
0.625
0.625
0.625
0.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
1.38
3/16 X 3/16 X 1.02
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.67
CYCLO® 6000 Speed Reducers
Dimensions Universal and Vertical V-Flange Mount, C-Face
Single Reduction
CNVJ-6060/5Y 6120/5Y (cont.)
All dimensions are in inches
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
42C
48C
56C
42C
48C
56C
42C
48C
56C
42C
48C
56C~145TC
48C
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
3.75
3.75
5.88
3.75
3.75
5.88
3.75
3.75
5.88
3.75
3.75
5.88
3.75
5.88
7.25
5.88
7.25
5.88
7.25
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
3.000
4.500
8.500
4.500
8.500
4.500
8.500
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
4.33
6.69
8.98
6.69
8.98
6.69
8.98
0.22
0.22
0.22
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.43
0.55
0.43
0.55
0.43
0.55
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
7.49
7.87
8.27
7.72
8.10
8.50
8.79
9.17
9.63
9.73
10.11
10.58
10.35
10.81
11.85
11.20
12.24
12.82
13.57
1.78
2.16
2.56
1.78
2.16
2.56
1.74
2.12
2.58
1.78
2.16
2.63
2.16
2.63
3.67
2.62
3.66
2.63
3.37
0.47
0.47
0.47
0.47
0.47
0.47
0.39
0.39
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.28
0.47
0.47
0.47
2.44
2.44
3.15
2.44
2.44
3.15
2.48
2.48
3.07
2.44
2.44
4.21
2.44
4.21
5.43
3.94
3.94
4.21
5.43
11
11
13
13
13
15
22
22
23
25
25
27
29
31
35
35
40
60
64
Speed
Reducers
Dimensions
Model
CNVJ
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.67
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.68
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Single Reduction
CVVJ-6130/5Y 6205Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CVVJ
A
6130/5Y
10.24
6140/5Y
10.24
6160/5
13.39
6170/5
15.75
6180/5
16.93
6190/5
19.29
6205
17.91
Model
CVVJ
6130/5Y
6140/5Y
6160/5
6170/5
6180/5
6190/5
6205
4.68 Dimensions
U*
1.875
1.875
2.250
2.750
3.125
3.625
3.875
B
7.8720
7.8692
7.8720
7.8692
10.6277
10.6245
12.4385
12.4350
13.5802
13.5767
15.7456
15.7421
13.9739
13.9704
V
2.40
3.19
3.15
3.31
3.94
4.92
6.50
C
G
H
NO.
M
P
AH
12.64
0.59
0.43
6
2.99
0.16
9.06
13.43
0.59
0.43
6
3.78
0.16
9.06
16.26
0.79
0.43
6
3.50
0.16
12.20
18.78
0.87
0.55
8
3.70
0.20
14.17
20.75
0.87
0.71
8
4.33
0.20
15.35
24.41
1.18
0.71
12
5.71
0.24
17.72
26.69
1.18
0.87
8
8.03
0.20
15.94
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
L1
0.71
0.71
0.71
0.94
0.94
1.34
1.34
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
1 X 1 X 6.50
XU*
0.875
0.875
1.125
1.375
1.500
1.750
1.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
2.17
5/16 X 5/16 X 2.16
2.56
3/8 X 3/8 X 2.56
2.76
3/8 X 3/8 X 2.76
3.23
3/8 X 3/8 X 3.23
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.69
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Single Reduction
CVVJ-6130/5Y 6205Y (cont.)
All dimensions are in inches
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
6205Y
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
143TC-145TC
182TC~184TC
213TC~215TC
254TC~256TC
143TC-145TC
182TC~184TC
213TC~215TC
254TC~256TC
143TC-145TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
364TC~365TC
364TSC~365TSC
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
5.88
7.25
7.25
7.25
9.00
7.25
7.25
7.25
9.00
11.00
7.25
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
11.00
11.00
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
10.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
12.500
12.500
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
11.10
8.98
8.98
8.98
11.10
14.17
8.98
8.98
8.98
11.10
13.86
8.98
8.98
11.10
13.86
9.84
9.84
11.10
13.86
13.86
13.86
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.54
0.54
0.55
0.43
0.54
0.54
0.55
0.43
0.55
0.55
0.55
0.55
0.59
0.59
0.59
0.59
0.71
0.59
0.59
0.59
0.59
0.71
0.59
0.59
0.59
0.71
0.59
0.59
0.59
0.71
0.71
0.71
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
8
15.26
16.01
16.64
17.57
16.05
16.80
17.43
18.35
18.89
19.63
20.26
21.01
21.70
22.16
22.78
23.53
24.22
24.78
24.25
24.75
25.50
26.19
27.25
28.54
29.16
29.85
30.91
30.79
31.43
32.06
33.17
33.92
31.79
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.75
5.44
3.38
4.00
4.75
5.44
6.00
3.50
4.00
4.75
5.44
6.50
4.13
4.75
5.44
6.50
4.10
4.73
5.36
6.48
7.22
5.10
0.47
0.47
1.10
0.57
0.47
0.47
1.10
0.57
0.47
0.57
1.20
0.57
0.57
0.57
1.20
0.57
0.57
0.57
0.57
1.07
0.57
0.57
0.57
1.29
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
4.21
5.43
5.43
5.08
4.21
5.43
5.43
5.08
4.21
5.71
5.71
5.71
6.50
5.71
5.71
5.71
7.87
7.87
5.71
5.71
5.71
7.87
7.87
5.71
5.71
7.87
7.87
5.91
5.91
6.89
8.27
8.27
8.27
105
108
116
117
107
111
118
119
216
220
228
223
216
314
321
316
327
347
379
384
392
387
391
566
559
568
593
626
626
633
658
656
648
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CVVJ
Dimensions 4.69
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.70
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Single Reduction
CVVJ-6215Y 6265Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Speed
Reducers
Dimensions
All dimensions are in inches
Model
CVVJ
A
6215
19.29
6225
21.06
6235
22.44
6245
25.00
6255
26.97
6265
29.53
Model
CVVJ
6215
6225
6235
6245
6255
6265
4.70 Dimensions
U*
4.250
4.625
5.000
5.500
6.250
6.625
B
15.3519
15.3484
16.3359
16.3321
17.7139
17.7100
19.0918
19.0880
21.0600
21.0557
22.4380
22.4336
V
6.50
6.50
7.87
7.87
9.45
11.81
C
G
H
NO.
M
P
AH
27.87
1.38
0.94
8
7.99
0.28
17.32
29.61
1.38
1.06
8
8.27
0.39
18.70
33.03
1.57
1.06
8
9.84
0.39
20.08
34.53
1.57
1.30
8
9.84
0.39
22.05
40.94
1.77
1.30
8
11.61
0.39
24.02
45.28
1.97
1.54
8
14.17
0.39
25.98
Low Speed Shaft
S
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.34
1.34
1.61
1.61
1.93
1.93
Key
1 X 1 X 6.50
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
XU*
1.875
2.125
2.250
2.500
3.125
3.125
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
3.23
3.23
4.13
4.13
5.12
5.12
Key
1/2 X 1/2 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 4.13
5/8 X 5/8 X 4.13
3/4 X 3/4 X 5.12
3/4 X 3/4 X 5.12
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.71
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Single Reduction
CVVJ-6215 6265 (cont.)
All dimensions are in inches
6215Y
6225Y
6235Y
6245Y
6255Y
6265Y
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
254TC~256CTC
284TC~286TC
324TC~326TC
364TC~365TC
364TC~365TSC
254TC~256CTC
284TC~286TC
324TC~326TC
364TC~365TC
364TC~365TSC
404TC~405TC
404TC~405TSC
364TC~365TC
404TC~405TC
324TC~326TC
364TC~365TC
404TC~405TC
364TC~365TC
404TC~405TC
364TC~365TC
404TC~405TC
7.25
9.00
11.00
11.00
11.00
7.25
9.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
8.500
10.500
12.500
12.500
12.500
8.500
10.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
9.84
11.10
13.86
13.86
13.86
11.10
11.10
13.86
13.86
13.86
13.86
13.86
13.86
13.86
14.57
13.86
13.86
13.86
13.86
15.75
15.75
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.59
0.59
0.71
0.71
0.71
0.59
0.59
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.71
4
4
4
8
8
4
4
4
8
8
8
8
4
8
4
8
8
8
8
8
8
32.63
33.26
34.37
35.12
33.00
34.37
35.00
36.11
36.85
34.74
38.23
35.24
39.57
41.69
41.06
41.77
43.15
48.20
49.57
52.52
53.91
4.75
5.38
6.50
7.24
5.12
4.76
5.39
6.50
7.24
5.14
8.63
5.63
6.54
8.66
6.54
7.24
8.63
7.25
8.63
7.24
8.63
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
5.91
6.89
8.27
8.46
8.46
5.51
6.30
8.46
8.46
8.46
8.46
8.46
8.66
8.46
8.27
8.46
8.46
9.45
9.45
9.45
9.45
802
807
832
824
869
1015
1014
1025
1027
1019
1035
1021
1217
1239
1497
1490
1484
2189
2220
2828
2859
Speed
Reducers
Dimensions
Model
CVVJ
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.71
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.72
CYCLO® 6000 Speed Reducers
Dimensions Universal V-Flange Mount, Hollow Input
Single Reduction
CNVX-6060/5Y 6120/5Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
All dimensions are in inches
Model
CNVX
Dimensions
Speed
Reducers
A
6060/5Y
4.72
6070/5Y
6.30
6080/5Y
6.30
6090/5Y
6.30
6100/5Y
6.30
6110/5Y
8.27
6120/5Y
8.27
Model
CNVX
6060/5Y
6070/5Y
6080/5Y
6090/5Y
6100/5Y
6110/5Y
6120/5Y
U*
0.500
0.750
0.875
1.125
1.125
1.250
1.500
4.72 Dimensions
B
3.1484
3.1466
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
5.5101
5.5076
5.5101
5.5076
V
0.98
1.18
1.38
1.38
1.38
1.77
2.17
G
H
K
NO.
M
P
AH
0.31
0.35
3.62
6
1.34
0.12
4.02
0.35
0.43
3.86
4
1.65
0.12
5.28
0.35
0.43
5.08
4
1.89
0.12
5.28
0.35
0.43
5.59
4
1.89
0.12
5.28
0.35
0.43
6.14
4
1.89
0.12
5.28
0.43
0.43
6.69
6
2.28
0.16
7.09
0.51
0.43
7.32
6
2.72
0.16
7.09
Low Speed Shaft
S
10-32UNF
12-28UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
5/16-18UNC
L1
0.63
0.63
0.63
0.79
0.79
0.79
0.79
Key
1/8 X 1/8 X 0.79
3/16 X 3/16 X 1.06
3/16 X 3/16 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.73
CYCLO® 6000 Speed Reducers
Dimensions Universal V-Flange Mount, Hollow Input
Single Reduction
CNVX-6060/5Y 6120/5Y (cont.)
All dimensions are in inches
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
CL
C
Z
6060/5Y
56C
5.88
4.50
6.69
0.20
0.43
4
6.61
2.99
5.59
0.47
0.625
6070/5Y
56C
5.88
4.50
6.69
0.20
0.43
4
6.85
2.99
5.83
0.47
0.625
56C
5.88
4.50
6.69
0.20
0.43
4
8.19
3.11
7.54
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
8.19
3.11
7.54
0.47
0.875
56C
5.88
4.50
6.69
0.20
0.43
4
8.94
3.35
7.91
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
8.94
3.35
8.31
0.47
0.875
56C
5.88
4.50
6.69
0.20
0.43
4
9.29
3.15
8.23
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
9.29
3.15
8.70
0.47
0.875
56C
5.88
4.50
6.69
0.20
0.43
4
9.96
3.27
9.31
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.20
0.43
4
9.96
3.27
9.31
0.47
0.875
182TC-184TC
7.25
8.50
8.98
0.22
0.59
4
10.71
4.02
9.61
0.69
1.125
XU
6080/5Y
6090/5Y
6100/5Y
6110/5Y
56C
5.88
4.50
6.69
0.22
0.43
4
11.30
3.98
10.25
0.47
0.625
143TC-145TC
5.88
4.50
6.69
0.22
0.43
4
11.30
3.98
10.45
0.47
0.875
182TC-184TC
7.25
8.50
8.98
0.22
0.55
4
12.44
5.12
11.55
0.67
1.125
213TC-215TC
7.25
8.50
8.98
0.22
0.55
4
12.44
5.12
11.67
0.67
1.375
6120/5Y
Cyclo® 6000 Series
High Speed Shaft
XV
Keyway
+0.0007
-.00000
0.0007
+
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0016
-.00008
+0.0016
-.00008
+0.0020
-.00010
Approx
Wt. (lb)
1.10
3/16 x 3/32
12
1.10
3/16 x 3/32
14
1.56
3/16 x 3/32
26
1.56
3/16 x 3/32
26
1.18
3/16 x 3/32
24
1.57
3/16 x 3/32
24
1.18
3/16 x 3/32
29
1.65
3/16 x 3/32
29
1.56
3/16 x 3/32
35
1.56
3/16 x 3/32
35
1.85
1/4 x 1/8
41
Speed
Reducers
1.18
3/16 x 3/32
59
1.50
3/16 x 3/32
59
2.48
1/4 x 1/8
62
2.64
5/16 x 5/32
62
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions
Model
CNVX
Dimensions 4.73
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.74
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Dimensions
Speed
Reducers
4.74 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.75
CYCLO® 6000 Speed Reducers
Dimensions Vertical and Universal V-Flange Mount, Shovel Base
Single Reduction
CNV[1]-6120/5Y-SB
CVV[1]-6130/5Y 6140/5Y-SB
*Shaft Tolerances
Shaft Nominal Diameter (inches)
0.500 (1/2) through 0.625 (5/8)
Tolerances (inches)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
1.250 (1 1/4) through 1.875 (1 7/8)
2.000 (2) through 3.125 (3 1/8)
3.250 (3 1/4) through 4.625 (4 5/8)
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0005
+0.0000/-0.0006
+0.0000/-0.0007
+0.0000/-0.0009
+0.0000/-0.0010
All dimensions are in inches
A
6120/5Y-SB
8.27
6130/5Y-SB
10.24
6140/5Y-SB
10.24
Model
CNV
CVV[1]
6120/5Y-SB
6130/5Y-SB
6140/5Y-SB
Model
CNV, CVV[1]
6120/5Y-SB
6130/5Y-SB
6140/5Y-SB
B
5.5101
5.5076
7.8720
7.8692
7.8720
7.8692
C
G
H
NO.
M
P
AH
10.20
0.51
0.43
6
2.72
0.16
7.09
12.64
0.59
0.43
6
2.99
0.16
9.06
13.43
0.59
0.43
6
3.78
0.16
9.06
Speed
Reducers
Dimensions
Model
CNV
CVV[1]
Low Speed Shaft
U*
1.500
1.875
1.875
V
2.17
2.40
3.19
Dimensions
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
S
5/16-18UNC
3/8-16UNC
3/8-16UNC
143T
High Speed Shaft
L1
0.79
0.71
0.71
145T
24.25
0.50
0.52
83
30.83
0.50 0.52
125
31.61
0.50 0.52
171
Key
3/8 X 3/8 X 1.77
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
182T
184T
24.25
0.71
81
30.83
0.71
125
31.61
0.71
146
213T
215T
28.74
0.88
96
30.83
0.88
135
31.61
0.88
143
XU*
0.750
0.875
0.875
254T
XV
1.38
1.57
1.57
256T
284T
Key
3/16 X 3/16 X 1.02
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
286T
324T
326T
364T
365T
34.84
1.00
135
35.63
1.00
154
Note: [1] Model 6120/5Y-SB is type CNV; Models 6130/5Y-SB and 6140/5Y-SB are type CVV.
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.75
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.76
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, Shovel Base
Single Reduction
CVV-6160/5Y 6235Y-SB
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CVV
A
6160/5Y-SB
13.39
6170/5Y-SB
15.75
6180/5Y-SB
16.93
6190/5Y-SB
19.29
6205Y-SB
17.91
6215Y-SB
19.29
6225Y-SB
21.06
6235Y-SB
22.44
Model
CVV
6160/5Y-SB
6170/5Y-SB
6180/5Y-SB
6190/5Y-SB
6205Y-SB
6215Y-SB
6225Y-SB
6235Y-SB
4.76 Dimensions
U*
2.250
2.750
3.125
3.625
3.875
4.250
4.625
5.000
B
10.6277
10.6245
12.4385
12.4350
13.5802
13.5767
15.7456
15.7421
13.9739
13.9704
15.3519
15.3484
16.3359
16.3321
17.7139
17.7100
V
3.15
3.31
3.94
4.92
6.50
6.50
6.50
7.87
C
G
H
NO.
M
P
AH
16.26
0.79
0.43
6
3.50
0.16
12.20
18.78
0.87
0.55
8
3.70
0.20
14.17
20.75
0.87
0.71
8
4.33
0.20
15.35
24.41
1.18
0.71
12
5.71
0.24
17.72
26.69
1.18
0.87
8
8.03
0.20
15.94
27.87
1.38
0.94
8
7.99
0.28
17.32
29.61
1.38
1.06
8
8.27
0.39
18.70
33.03
1.57
1.06
8
9.84
0.39
20.08
Low Speed Shaft
S
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
L1
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.61
Key
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 7.87
XU*
1.125
1.375
1.500
1.750
1.750
1.875
2.125
2.250
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
High Speed Shaft
XV
Key
1.77
1/4 X 1/4 X 1.77
2.17
5/16 X 5/16 X 2.16
2.56
3/8 X 3/8 X 2.56
2.76
3/8 X 3/8 X 2.76
3.23
3/8 X 3/8 X 3.23
3.23
1/2 X 1/2 X 3.23
3.23
1/2 X 1/2 X 3.23
4.13
1/2 X 1/2 X 4.13
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.77
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, Shovel Base
Single Reduction
CVV-6160/5Y 6235Y-SB (cont.)
All dimensions are in inches
6160Y
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
6225Y
6235Y
Dimensions
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
143T 145T
32.68
0.50
220
34.41
0.71
320
Cyclo® 6000 Series
182T 184T
32.68
0.75
218
34.41
0.71
318
40.04
0.88
405
213T 215T
37.68
0.88
239
37.83
0.88
326
40.04
0.88
402
47.01
1.00
602
47.81
1.00
645
45.43
1.00
763
254T
256T
37.68
1.00
234
43.43
1.00
390
46.02
1.00
455
47.01
1.00
597
47.81
1.00
655
51.81
1.00
822
51.42
1.00
995
284T 286T
40.87
1.00
276
43.43
1.00
382
46.02
1.00
447
52.09
1.00
656
53.88
1.00
685
51.81
1.00
814
56.50
1.00
1031
59.88
1.00
1214
324T
326T
46.14
1.50
401
50.04
1.50
471
52.07
1.50
646
53.88
1.50
740
54.88
1.50
832
56.50
1.50
1021
59.88
1.50
1204
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
364T
365T
54.82
1.63
812
56.81
1.63
851
59.41
1.63
1036
61.85
1.63
1216
Speed
Reducers
Dimensions
Model
Dimensions 4.77
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.78
CYCLO® 6000 Speed Reducers
Dimensions Universal and Vertical V-Flange Side Mount
Single Reduction
CNVP-6110/5Y 6120/5Y, CVVP-6130/5Y 6235Y[1]
All dimensions are in inches
*Shaft Tolerances
Dimensions
Speed
Reducers
Model
CNVP
CVVP[1]
A
6110/5Y
8.27
6120/5Y
8.27
6130/5Y
10.24
6140/5Y
10.24
6160/5Y
13.39
6170/5Y
15.75
6180/5Y
16.93
6190/5Y
19.29
6205Y
17.91
6215Y
19.29
6225Y
21.06
6235Y
22.44
B
5.5101
5.5076
5.5101
5.5076
7.8720
7.8692
7.8720
7.8692
10.6277
10.6245
12.4385
12.4350
13.5802
13.5767
15.7456
15.7421
13.9739
13.9704
15.3519
15.3484
16.3359
16.3321
17.7139
17.7100
C
G
H
NO.
M
P
AH
8.58
0.43
0.43
6
2.28
0.16
7.09
10.20
0.51
0.43
6
2.72
0.16
7.09
12.64
0.59
0.43
6
2.99
0.16
9.06
13.43
0.59
0.43
6
3.78
0.16
9.06
16.26
0.79
0.43
6
3.50
0.16
12.20
18.78
0.87
0.55
8
3.70
0.20
14.17
20.75
0.87
0.71
8
4.33
0.20
15.35
24.41
1.18
0.71
12
5.71
0.24
17.72
26.69
1.18
0.87
8
8.03
0.20
15.94
27.87
1.38
0.94
8
7.99
0.28
17.32
29.61
1.38
1.06
8
8.27
0.39
18.70
33.03
1.57
1.06
8
9.84
0.39
20.08
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Note: [1] Models 6110/5Y and 6120/5Y are type CNVP; Models6130/5Y - 6235Y are type CVVP.
4.78 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.79
CYCLO® 6000 Speed Reducers
Dimensions Universal and Vertical V-Flange Side Mount
Single Reduction
CNVP-6110/5Y 6120/5Y, CVVP-6130/5Y 6235Y[1, 2] (cont.)
All dimensions are in inches
Model
CNVP
CVVP[1, 2]
6110/5Y
6120/5Y
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
6225Y
6235Y
Low Speed Shaft
U*
1.250
1.500
1.875
1.875
2.250
2.750
3.125
3.625
3.875
4.250
4.625
5.000
Dimensions
MIN
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
PH
V
1.77
2.17
2.40
3.19
3.15
3.31
3.94
4.92
6.50
6.50
6.50
7.87
56
S
5/16-18UNC
5/16-18UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
High Speed Shaft
L1
0.79
0.79
0.71
0.71
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.61
Key
1/4 X 1/4 X 1.46
3/8 X 3/8 X 1.77
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.50
1-1/4 X 7/8 X 7.87
XU*
0.625
0.750
0.875
0.875
1.125
1.375
1.500
1.750
1.750
1.875
2.125
2.250
XV
0.98
1.38
1.57
1.57
1.77
2.17
2.56
2.76
3.23
3.23
3.23
4.13
Key
3/16 X 3/16 X 0.75
3/16 X 3/16 X 1.02
3/16 X 3/16 X 1.38
3/16 X 3/16 X 1.38
1/4 X 1/4 X 1.77
5/16 X 5/16 X 2.16
3/8 X 3/8 X 2.56
3/8 X 3/8 X 2.76
3/8 X 3/8 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 3.23
1/2 X 1/2 X 4.13
143T 145T 182T 184T 213T 215T 254T 256T 284T 286T 324T 326T 364T 365T 404T 405T 444T 445T 447T
7.08
9.53
12.01
7.08
9.53
14.96
7.59
9.91
14.96
7.59
9.91
14.96
9.16
12.17
14.02
10.20
13.08
17.01
7.59
9.91
17.01
7.59
9.91
17.01
9.29
12.17
17.01
10.20
13.02
17.01
9.29
12.11
18.03
10.20
13.08
18.50
10.71
14.09
17.01
Speed
Reducers
10.71
14.03
20.00
12.28
15.45
20.00
13.30
17.13
15.98
Dimensions
Model
CNVP
CVVP[1]
6110/5Y
6120/5Y
6130/5Y
6140/5Y
6160/5Y
6170/5Y
6180/5Y
6190/5Y
6205Y
6215Y
6225Y
6235Y
12.28
15.39
24.02
13.52
17.00
24.02
13.52
17.00
18.98
14.27
18.25
24.02
14.78
18.76
24.02
15.64
19.87
15.98
15.77
19.75
18.98
15.77
19.75
24.02
14.52
18.25
28.03
15.26
18.74
28.03
16.27
19.75
28.03
Note: [1] Models 6110/5Y and 6120/5Y are type CNVP; Models 6130/5Y - 6235Y are type CVVP.
[2] Because the Cyclo® reducer is so compact, in certain frame sizes the motor may extend below the Cyclo® mounting flange.
Please consult factory for additional information.
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.79
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.80
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Side Mount
Single Reduction
CVVP-6245Y 6275Y
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CVVP
A
6245Y
25.00
6255Y
26.97
6265Y
29.53
6275Y
45.67
Model
CVVP
19.0918
19.0880
21.0600
21.0557
22.4380
22.4336
35.4297
35.4242
U*
5.500
6.250
6.625
7.000
6245Y
6255Y
6265Y
6275Y
Model
CVVP[1]
B
Dimensions
6245Y
6255Y
6265Y
6275Y
MIN
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
MIN
PH
MAX
PW
PH
V
7.87
9.45
11.81
12.60
56
C
G
H
NO.
M
P
AH
34.53
1.57
1.30
8
9.84
0.39
22.05
40.94
1.77
1.30
8
11.61
0.39
24.02
45.28
1.97
1.54
8
14.17
0.39
25.98
57.56
2.36
1.54
8
13.98
0.39
40.16
Low Speed Shaft
S
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.61
1.93
1.93
2.05
Key
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13
XU*
2.500
3.125
3.125
3.500
High Speed Shaft
XV
4.13
5.12
5.12
5.91
Key
5/8 X 5/8 X 4.13
3/4 X 3/4 X 5.12
3/4 X 3/4 X 5.12
7/8 X 7/8 X 5.90
143T 145T 182T 184T 213T 215T 254T 256T 284T 286T 324T 326T 364T 365T 404T 405T 444T 445T 447T
17.05
20.80
22.05
17.05
20.80
24.02
17.58
20.82
28.03
18.80
22.04
28.03
19.82
25.07
28.03
18.31
22.06
24.02
19.29
25.04
24.02
18.80
22.04
30.00
19.82
25.07
30.00
23.44
28.69
34.02
Note: [1] Because the Cyclo® reducer is so compact, in certain frame sizes the motor may extend below the Cyclo® mounting flange.
Please consult factory for additional information.
4.80 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.81
CYCLO® 6000 Speed Reducers
Dimensions Universal V-Flange Mount
Double Reduction
CNV-6060/5DAY 6120/5DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
A
6060/5DAY
4.72
6070/5DAY
6.30
6090/5DAY
6.30
6100/5DAY
6.30
6120/5DBY
8.27
Model
CNV
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
U*
0.500
0.750
1.125
1.125
1.500
B
3.1484
3.1466
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
5.5101
5.5076
V
0.98
1.18
1.38
1.38
2.17
C
G
H
NO.
M
O
P
AH
7.01
0.31
0.35
6
1.34
-
0.12
4.02
7.24
0.35
0.43
4
1.65
-
0.12
5.28
9.57
0.35
0.43
4
1.89
4.21
0.12
5.28
10.12
0.35
0.43
4
1.89
4.21
0.12
5.28
12.28
0.51
0.43
6
2.72
5.39
0.16
7.09
Low Speed Shaft
S
10-32UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
Cyclo® 6000 Series
L1
0.63
0.63
0.79
0.79
0.79
Key
1/8 X 1/8 X 0.79
3/16 X 3/16 X 1.06
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
3/8 X 3/8 X 1.77
XU*
0.500
0.500
0.500
0.500
0.625
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CNV
Approx.
Wt. (lb.)
11
15
24
29
64
Dimensions 4.81
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.82
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount
Double Reduction
CVV-6130/5DAY 6275DAY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CVV
Dimensions
Speed
Reducers
A
6130/5DAY
10.24
6130/5DBY
10.24
6130/5DCY
10.24
6140/5DAY
10.24
6140/5DBY
10.24
6140/5DCY
10.24
6160/5DCY
13.39
6170/5DCY
15.75
6180/5DBY
16.93
6190/5DAY
19.29
6190/5DBY
19.29
6205DAY
17.91
6205DBY
17.91
6215DAY
19.29
6215DBY
19.29
6225DAY
21.06
6225DBY
21.06
6235DAY
22.44
6235DBY
22.44
4.82 Dimensions
B
7.8720
7.8692
7.8720
7.8692
7.8720
7.8692
7.8720
7.8692
7.8720
7.8692
7.8720
7.8692
10.6277
10.6245
12.4385
12.4350
13.5802
13.5767
15.7456
15.7421
15.7456
15.7421
13.9739
13.9704
13.9739
13.9704
15.3519
15.3484
15.3519
15.3484
16.3359
16.3321
16.3359
16.3321
17.7139
17.7100
17.7139
17.7100
C
G
H
NO.
M
P
AH
X
Y
13.66
0.59
0.43
6
2.99
0.16
9.06
-
-
14.29
0.59
0.43
6
2.99
0.16
9.06
-
-
14.53
0.59
0.43
6
2.99
0.16
9.06
-
-
14.45
0.59
0.43
6
3.78
0.16
9.06
-
-
15.08
0.59
0.43
6
3.78
0.16
9.06
-
-
15.31
0.59
0.43
6
3.78
0.16
9.06
-
-
18.19
0.79
0.43
6
3.50
0.16
12.20
7.72
7.87
20.04
0.87
0.55
8
3.70
0.20
14.17
8.58
8.86
22.72
0.87
0.71
8
4.33
0.20
15.35
9.17
9.45
24.76
1.18
0.71
12
5.71
0.24
17.72
10.04
10.63
25.71
1.18
0.71
12
5.71
0.24
17.72
10.04
10.63
26.38
1.18
0.87
8
8.03
0.20
15.94
13.43
11.30
27.76
1.18
0.87
8
8.03
0.20
15.94
13.43
11.30
28.78
1.38
0.94
8
7.99
0.28
17.32
13.70
12.05
30.71
1.38
0.94
8
7.99
0.28
17.32
13.70
12.05
30.43
1.38
1.06
8
8.27
0.39
18.70
13.86
12.83
33.86
1.38
1.06
8
8.27
0.39
18.70
13.86
12.83
34.76
1.57
1.06
8
9.84
0.39
20.08
14.13
13.54
36.93
1.57
1.06
8
9.84
0.39
20.08
14.13
13.54
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.83
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount
Double Reduction
CVV-6130/5DAY 6275DAY (cont.)
All dimensions are in inches
A
6245DAY
25.00
6245DBY
25.00
6255DAY
26.97
6255DBY
26.97
6265DAY
29.53
6275DAY
45.67
Model
CVV
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
6215DAY
6215DBY
6225DAY
6225DBY
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
U*
1.875
1.875
1.875
1.875
1.875
1.875
2.250
2.750
3.125
3.625
3.625
3.875
3.875
4.250
4.250
4.625
4.625
5.000
5.000
5.500
5.500
6.250
6.250
6.625
7.000
B
19.0918
19.0880
19.0918
19.0880
21.0600
21.0557
21.0600
21.0557
22.4380
22.4336
35.4297
35.4242
C
G
H
NO.
M
P
AH
X
Y
36.26
1.57
1.30
8
9.84
0.39
22.05
14.57
14.61
38.39
1.57
1.30
8
9.84
0.39
22.05
14.57
14.61
42.56
1.77
1.30
8
11.61
0.39
24.02
15.55
15.71
44.61
1.77
1.30
8
11.61
0.39
24.02
15.55
15.71
48.94
1.97
1.54
8
14.17
0.39
25.98
16.81
16.97
59.21
2.36
1.54
8
13.98
0.39
40.16
24.02
24.13
V
2.40
2.40
2.40
3.19
3.19
3.19
3.15
3.31
3.94
4.92
4.92
6.50
6.50
6.50
6.50
6.50
6.50
7.87
7.87
7.87
7.87
9.45
9.45
11.81
12.60
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
Cyclo® 6000 Series
L1
0.71
0.71
0.71
0.71
0.71
0.71
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.34
1.34
1.34
1.34
1.61
1.61
1.61
1.61
1.93
1.93
1.93
2.05
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13
XU*
0.500
0.625
0.625
0.500
0.625
0.625
0.750
0.750
0.875
0.750
0.875
0.750
0.875
0.875
1.125
0.875
1.375
1.125
1.500
1.125
1.500
1.375
1.750
1.750
1.750
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
1.38
3/16 X 3/16 X 1.02
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
1.57
3/16 X 3/16 X 1.38
2.17
5/16 X 5/16 X 2.16
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
2.17
5/16 X 5/16 X 2.16
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Approx.
Wt. (lb.)
89
95
97
89
95
97
198
276
377
505
529
542
569
734
783
900
1003
1125
1200
1332
1396
2040
2190
2789
5865
Speed
Reducers
Dimensions
Model
CVV
Dimensions 4.83
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.84
CYCLO® 6000 Speed Reducers
Dimensions Universal V-Flange Mount, C-Face
Double Reduction
CNVJ-6060/5DAY 6120/5DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CNVJ
A
6060/5DAY
4.72
6070/5DAY
6.30
6090/5DAY
6.30
6100/5DAY
6.30
6120/5DBY
8.27
Model
CNVJ
B
3.1484
3.1466
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
5.5101
5.5076
C
G
H
NO.
M
P
AH
7.01
0.31
0.35
6
1.34
0.12
4.02
7.24
0.35
0.43
4
1.65
0.12
5.28
9.57
0.35
0.43
4
1.89
0.12
5.28
10.12
0.35
0.43
4
1.89
0.12
5.28
12.28
0.51
0.43
6
2.72
0.16
7.09
Model
CNVJ
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
42C
48C
42C
48C
42C
48C
56C~145TC
42C
48C
56C~145TC
42C
48C
56C~145TC
3.75
3.75
3.75
3.75
3.75
3.75
5.87
3.75
3.75
5.87
3.75
3.75
5.87
3.000
3.000
3.000
3.000
3.000
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
4.33
4.33
4.33
4.33
4.33
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
-
0.28
0.28
0.28
0.28
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
4
4
4
4
4
4
4
4
4
4
4
4
4
8.79
9.17
9.02
9.40
11.35
11.72
12.13
11.90
12.28
12.68
14.06
14.44
14.91
1.78
2.16
1.78
2.16
1.78
2.16
2.56
1.78
2.16
2.56
1.78
2.16
2.63
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
2.44
2.44
2.44
2.44
2.44
2.44
3.15
2.44
2.44
3.15
2.44
2.44
4.21
14
14
18
18
27
27
30
32
32
34
69
69
71
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
4.84 Dimensions
L1
0.63
0.63
0.79
0.79
0.79
Key
1/8 X 1/8 X 0.79
3/16 X 3/16 X 1.06
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
3/8 X 3/8 X 1.77
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
6060/5DAY
6070/5DAY
6090/5DAY
6100/5DAY
6120/5DBY
6060/5DAY
V
0.98
1.18
1.38
1.38
2.17
Low Speed Shaft
S
10-32UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
U*
0.500
0.750
1.125
1.125
1.500
XU*
0.500
0.500
0.500
0.500
0.625
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.85
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Dimensions
Speed
Reducers
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.85
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.86
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Double Reduction
CVVJ-6130/5DAY 6140/5DCY
*Shaft Tolerances
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CVVJ
A
6130/5DAY
10.24
6130/5DBY
10.24
6130/5DCY
10.24
6140/5DAY
10.24
6140/5DBY
10.24
6140/5DCY
10.24
Model
CVVJ
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
4.86 Dimensions
U*
1.875
1.875
1.875
1.875
1.875
1.875
B
7.8720
7.8692
7.8720
7.8692
7.8720
7.8692
7.8720
7.8692
7.8720
7.8692
7.8720
7.8692
V
2.40
2.40
2.40
3.19
3.19
3.19
C
G
H
NO.
M
P
AH
13.66
0.59
0.43
6
2.99
0.16
9.06
14.29
0.59
0.43
6
2.99
0.16
9.06
14.53
0.59
0.43
6
2.99
0.16
9.06
14.45
0.59
0.43
6
3.78
0.16
9.06
15.08
0.59
0.43
6
3.78
0.16
9.06
15.31
0.59
0.43
6
3.78
0.16
9.06
Low Speed Shaft
S
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
L1
0.71
0.71
0.71
0.71
0.71
0.71
Key
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
XU*
0.500
0.625
0.625
0.500
0.625
0.625
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
High Speed Shaft
XV
Key
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
0.98
1/8 X 1/8 X 0.71
0.98
3/16 X 3/16 X 0.75
0.98
3/16 X 3/16 X 0.75
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.87
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Double Reduction
CVVJ-6130/5DAY 6140/5DCY (cont.)
All dimensions are in inches
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
42C
48C
56C~143TC
42C
48C
56C~143TC
48C
56C~145TC
42C
48C
56C~143TC
42C
48C
56C~145TC
48C
56C~145TC
182TC~184TC
3.75
3.75
5.88
3.75
3.75
5.88
3.75
5.87
3.75
3.75
5.88
3.75
3.75
5.88
3.75
5.88
7.25
3.000
3.000
4.500
3.000
3.000
4.500
3.000
4.500
3.000
3.000
4.500
3.000
3.000
4.500
3.000
4.500
8.500
4.33
4.33
6.69
4.33
4.33
6.69
4.33
6.69
4.33
4.33
6.69
4.33
4.33
6.69
4.33
6.69
8.98
0.22
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.43
0.28
0.28
0.43
0.28
0.28
0.43
0.28
0.43
0.55
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
15.44
15.82
16.22
16.07
16.45
16.92
16.69
17.15
16.23
16.61
17.01
16.86
17.24
17.70
17.47
17.94
18.98
1.78
2.16
2.56
1.78
2.16
2.63
2.16
2.63
1.78
2.16
2.56
1.78
2.16
2.63
2.16
2.63
3.67
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
0.47
2.44
2.44
4.21
2.44
2.44
4.21
2.44
4.21
2.44
2.44
4.21
2.44
2.44
4.21
2.44
4.21
5.43
93
93
95
99
101
103
102
104
93
93
95
100
100
102
103
104
108
Speed
Reducers
Dimensions
Model
CVVJ
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.87
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.88
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Double Reduction
CVVJ-6160/5DCY 6205DBY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Dimensions
Speed
Reducers
Model
CVVJ
A
6160/5DCY
13.39
6170/5DCY
15.75
6180/5DBY
16.93
6190/5DAY
19.29
6190/5DBY
19.29
6205DAY
17.91
6205DBY
17.91
Model
CVVJ
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
4.88 Dimensions
U*
2.250
2.750
3.125
3.625
3.625
3.875
3.875
B
10.6277
10.6245
12.4385
12.4350
13.5802
13.5767
15.7456
15.7421
15.7456
15.7421
13.9739
13.9704
13.9739
13.9704
V
3.15
3.31
3.94
4.92
4.92
6.50
6.50
C
G
H
NO.
M
P
AH
18.19
0.79
0.43
6
3.50
0.16
12.20
20.04
0.87
0.55
8
3.70
0.20
14.17
22.72
0.87
0.71
8
4.33
0.20
15.35
24.76
1.18
0.71
12
5.71
0.24
17.72
25.71
1.18
0.71
12
5.71
0.24
17.72
26.38
1.18
0.87
8
8.03
0.20
15.94
27.76
1.18
0.87
8
8.03
0.20
15.94
Low Speed Shaft
S
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
L1
0.71
0.94
0.94
1.34
1.34
1.34
1.34
Key
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
XU*
0.750
0.750
0.875
0.750
0.875
0.750
0.875
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.38
3/16 X 3/16 X 1.02
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.89
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Double Reduction
CVVJ-6160/5DCY 6205DBY (cont.)
All dimensions are in inches
6160/5DCY
6170/5DCY
6180/5DBY
6190/5DAY
6190/5DBY
6205DAY
6205DBY
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
5.88
7.25
5.88
7.25
5.88
7.25
7.25
7.25
5.88
7.25
5.88
7.25
7.25
7.25
5.88
7.25
5.87
7.25
7.25
7.25
4.500
8.500
4.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
4.500
8.500
8.500
8.500
6.69
8.98
6.69
8.98
6.69
8.98
8.98
8.98
6.69
8.98
6.69
8.98
8.98
8.98
6.69
8.98
6.69
8.98
8.98
8.98
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.55
0.43
0.55
0.43
0.54
0.54
0.55
0.43
0.55
0.43
0.54
0.54
0.55
0.43
0.55
0.43
0.54
0.54
0.55
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
20.81
21.56
22.67
23.41
25.34
26.09
26.72
27.65
27.39
28.13
28.33
29.08
29.71
30.64
29.00
29.75
30.38
31.13
31.76
32.69
2.63
3.37
2.63
3.37
2.63
3.37
4.00
4.93
2.63
3.37
2.63
3.37
4.00
4.93
2.63
3.37
2.63
3.37
4.00
4.93
0.47
0.47
0.47
0.47
0.47
0.47
1.10
0.57
0.47
0.47
0.47
0.47
1.10
0.57
0.47
0.47
0.47
0.47
1.10
0.57
4.21
5.43
4.21
5.43
4.21
5.43
5.43
5.08
4.21
5.43
4.21
5.43
5.43
5.08
4.21
5.43
4.21
5.43
5.43
5.08
208
212
285
289
389
393
400
402
515
518
541
545
552
554
552
556
581
585
592
593
Speed
Reducers
Dimensions
Model
CVVJ
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.89
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.90
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Double Reduction
CVVJ-6215DAY 6275DAY
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
Dimensions
Speed
Reducers
All dimensions are in inches
Model
CVVJ
A
6215DAY
19.29
6215DBY
19.29
6225DAY
21.06
6225DBY
21.06
6235DAY
22.44
6235DBY
22.44
6245DAY
25.00
6245DBY
25.00
6255DAY
26.97
6255DBY
26.97
6265DAY
29.53
6275DAY
45.67
Model
CVVJ
6215DAY
6215DBY
6225DAY
6225DBY
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
4.90 Dimensions
U*
4.250
4.250
4.625
4.625
5.000
5.000
5.500
5.500
6.250
6.250
6.625
7.000
B
15.3519
15.3484
15.3519
15.3484
16.3359
16.3321
16.3359
16.3321
17.7139
17.7100
17.7139
17.7100
19.0918
19.0880
19.0918
19.0880
21.0600
21.0557
21.0600
21.0557
22.4380
22.4336
35.4297
35.4242
V
6.50
6.50
6.50
6.50
7.87
7.87
7.87
7.87
9.45
9.45
11.81
12.60
C
G
H
NO.
M
P
AH
28.78
1.38
0.94
8
7.99
0.28
17.32
30.71
1.38
0.94
8
7.99
0.28
17.32
30.43
1.38
1.06
8
8.27
0.39
18.70
33.86
1.38
1.06
8
8.27
0.39
18.70
34.76
1.57
1.06
8
9.84
0.39
20.08
36.93
1.57
1.06
8
9.84
0.39
20.08
36.26
1.57
1.30
8
9.84
0.39
22.05
38.39
1.57
1.30
8
9.84
0.39
22.05
42.56
1.77
1.30
8
11.61
0.39
24.02
44.61
1.77
1.30
8
11.61
0.39
24.02
48.94
1.97
1.54
8
14.17
0.39
25.98
59.21
2.36
1.54
8
13.98
0.39
40.16
Low Speed Shaft
S
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.34
1.34
1.34
1.34
1.61
1.61
1.61
1.61
1.93
1.93
1.93
2.05
Key
1 X 1 X 6.50
1 X 1 X 6.50
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
1-3/4 X 1-1/4 X 13
XU*
0.875
1.125
0.875
1.375
1.125
1.500
1.125
1.500
1.375
1.750
1.750
1.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
1.57
3/16 X 3/16 X 1.38
2.17
5/16 X 5/16 X 2.16
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
2.17
5/16 X 5/16 X 2.16
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.91
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, C-Face
Double Reduction
CVVJ-6215DAY 6275DAY (cont.)
All dimensions are in inches
6215DAY
6215DBY
6225DAY
6225DBY
6235DAY
6235DBY
6245DAY
6245DBY
6255DAY
6255DBY
6265DAY
6275DAY
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
XJ
Z
Min.
I.D.
Approx
Wt. (lb)
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
56C~145TC
182TC~184TC
213TC~215TC
254TC~256TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
182TC~184TC
213TC~215TC
254TC~256TC
284TC~286TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
213TC~215TC
254TC~256TC
284TC~286TC
324TC~326TC
5.87
7.25
7.25
7.25
5.87
7.25
7.25
7.25
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
11.00
5.88
7.25
7.25
7.25
7.25
7.25
7.25
9.00
11.00
7.25
7.25
7.25
9.00
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
7.25
7.25
9.00
11.00
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
12.500
4.500
8.500
8.500
8.500
8.500
8.500
8.500
10.500
12.500
8.500
8.500
8.500
10.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
8.500
8.500
10.500
12.500
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
13.86
6.69
8.98
8.98
8.98
8.98
8.98
8.98
11.10
13.86
8.98
8.98
8.98
11.10
8.98
8.98
11.10
13.86
8.98
8.98
11.10
13.86
8.98
8.98
11.10
13.86
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.43
0.54
0.54
0.55
0.43
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.43
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
0.55
0.55
0.55
0.71
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
31.41
32.15
32.78
33.71
33.33
34.08
34.71
35.46
33.06
33.81
34.43
35.36
37.24
37.86
38.61
39.30
37.39
38.14
38.76
39.52
40.43
40.93
41.68
42.37
43.43
38.89
39.63
40.26
41.01
41.89
42.39
43.14
43.82
44.89
45.94
46.56
47.31
48.00
48.73
49.36
50.04
51.11
53.06
53.69
54.37
55.44
63.34
63.96
64.65
65.71
2.63
3.37
4.00
4.93
2.63
3.37
4.00
4.75
2.63
3.37
4.00
4.93
3.38
4.00
4.75
5.44
2.63
3.37
4.00
4.75
3.50
4.00
4.75
5.44
6.50
2.63
3.37
4.00
4.75
3.50
4.00
4.75
5.44
6.50
3.38
4.00
4.75
5.44
4.13
4.75
5.44
6.50
4.13
4.75
5.44
6.50
4.13
4.75
5.44
6.50
0.47
0.47
1.10
0.57
0.47
0.57
1.20
0.57
0.47
0.47
1.10
0.57
0.57
1.20
0.57
0.57
0.47
0.57
1.20
0.57
0.57
1.07
0.57
0.57
0.57
0.47
0.57
1.20
0.57
0.57
1.07
0.57
0.57
0.57
0.57
1.20
0.57
0.57
1.29
0.57
0.57
0.57
1.29
0.57
0.57
0.57
1.29
0.57
0.57
0.57
4.21
5.43
5.43
5.08
4.21
5.71
5.71
5.71
4.21
5.43
5.43
5.08
5.71
5.71
5.71
7.87
4.21
5.71
5.71
5.71
5.71
5.71
5.71
7.87
7.87
4.21
5.71
5.71
5.71
5.71
5.71
5.71
7.87
7.87
5.71
5.71
5.71
7.87
5.71
5.71
7.87
7.87
5.71
5.71
7.87
7.87
5.71
5.71
7.87
7.87
746
750
757
759
824
829
836
831
912
916
923
924
1041
1048
1043
1054
1166
1171
1178
1173
1247
1253
1261
1256
1260
1373
1378
1385
1380
1444
1449
1458
1452
1456
2078
2084
2080
2091
2259
2252
2261
2286
2859
2852
2861
2886
5935
5928
5937
5962
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
CVVJ
Dimensions 4.91
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.92
CYCLO® 6000 Speed Reducers
Dimensions Universal and Vertical V-Flange Mount, Hollow Input
Double Reduction
CNVX-6065DAY 6125DBY, CVVX-6130/5DAY 6140/5DCY
All dimensions are in inches
*Shaft Tolerances
Dimensions
Speed
Reducers
Model
CNVX, CVVX[1]
A
6065DAY
4.72
6075DAY
6.30
6095DAY
6.30
6105DAY
6.30
6125DBY
8.27
6130/5DAY
10.24
6130/5DBY
10.24
6130/5DCY
10.24
6140/5DAY
10.24
6140/5DBY
10.24
6140/5DCY
10.24
B
3.1484
3.1466
4.3293
4.3272
4.3293
4.3272
4.3293
4.3272
5.5101
5.5076
7.8270
7.8692
7.8270
7.8692
7.8270
7.8692
7.8270
7.8692
7.8270
7.8692
7.8270
7.8692
G
H
K
NO.
M
P
AH
0.31
0.35
3.58
6
1.34
0.12
4.02
0.35
0.43
3.50
4
1.65
0.12
5.28
0.35
0.43
7.48
4
1.89
0.12
5.28
0.35
0.43
6.14
4
1.89
0.12
5.28
0.51
0.43
7.20
6
2.72
0.16
7.09
0.59
0.43
11.58
6
2.99
0.16
9.06
0.59
0.43
11.94
6
2.99
0.16
9.06
0.59
0.43
9.49
6
2.99
0.16
9.06
0.59
0.43
12.36
6
3.78
0.16
9.06
0.59
0.43
8.94
6
3.78
0.16
9.06
0.59
0.43
13.26
6
3.78
0.16
9.06
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
Note: [1] Models 6065DA ~ 6215DB are type CNVX; models 6135DC ~ 6145DB are type CVVX
4.92 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.93
CYCLO® 6000 Speed Reducers
Dimensions Universal and Vertical V-Flange Mount, Hollow Input
Double Reduction
CNVX-6065DAY 6125DBY, CVVX-6130/5DAY 6140/5DCY (cont.)
All dimensions are in inches
Low Speed Shaft
U*
0.500
0.750
1.125
1.125
1.500
1.875
1.875
1.875
1.875
1.875
1.875
V
0.98
1.18
1.38
1.38
2.17
2.40
2.40
2.40
3.19
3.19
3.19
S
10-32UNF
12-28UNF
5/16-18UNC
5/16-18UNC
5/16-18UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
3/8-16UNC
L1
0.63
0.63
0.79
0.79
0.79
0.71
0.71
0.71
0.71
0.71
0.71
Key
1/8 X 1/8 X 0.79
3/16 X 3/16 X 1.06
1/4 X 1/4 X 1.18
1/4 X 1/4 X 1.18
3/8 X 3/8X 1.77
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.16
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
1/2 X 1/2 X 2.95
Model
CNVX, CVVX[1]
Motor
Frame
AJ
AK
BD
BB
BF
R
CE
CL
C
Z
6065DAY
56C
5.88
4.50
6.69
0.20
0.43
4
7.91
2.99
7.28
0.47
0.625
6075DAY
56C
5.88
4.50
6.69
0.20
0.43
4
8.15
2.99
7.13
0.47
0.625
6095DAY
56C
5.88
4.50
6.69
0.20
0.43
4
10.47
2.99
9.45
0.47
0.625
6105DAY
56C
5.88
4.50
6.69
0.20
0.43
4
11.02
2.99
10.00
0.47
0.625
56C
5.88
4.50
6.69
0.20
0.43
4
13.27
3.35
12.24
0.47
0.625
143TC-145TC 5.88
4.50
6.69
0.20
0.43
4
13.27
3.35
12.64
0.47
0.875
XU
6125DBY
6130/5DAY
56C
5.88
4.50
6.69
-
0.43
4
14.57
2.99
13.55
0.47
0.625
56C
5.88
4.50
6.69
-
0.43
4
15.29
3.35
14.42
0.47
0.625
143TC-145TC 5.88
4.50
6.69
-
0.43
4
15.29
3.35
14.65
0.47
0.875
5.88
4.50
6.69
0.20
0.43
4
15.63
3.15
14.57
0.47
0.625
143TC-145TC 5.88
4.50
6.69
0.20
0.43
4
15.63
3.15
15.04
0.47
0.875
6130/5DBY
56C
6130/5DCY
6140/5DAY
56C
5.88
4.50
6.69
-
0.43
4
15.35
2.99
14.33
0.47
0.625
56C
5.88
4.50
6.69
0.20
0.43
4
16.06
3.35
15.04
0.47
0.625
143TC-145TC 5.88
4.50
6.69
0.20
0.43
4
16.06
3.35
15.43
0.47
0.875
5.88
4.50
6.69
-
0.43
4
16.41
3.15
15.35
0.47
0.625
143TC-145TC 5.88
4.50
6.69
-
0.43
4
16.41
3.15
15.82
0.47
0.875
6140/5DBY
56C
6140/5DCY
High Speed Shaft
XV
Keyway
+0.0007
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0007
-.00000
+0.0008
-.00000
+0.0007
-.00000
+0.0008
-.00000
Approx
Wt. (lb)
1.10
3/16 x 3/32
15
1.10
3/16 x 3/32
19
1.10
3/16 x 3/32
27
1.10
3/16 x 3/32
33
1.18
3/16 x 3/32
68
1.57
3/16 x 3/32
68
1.10
3/16 x 3/32
94
1.18
3/16 x 3/32
100
1.57
3/16 x 3/32
100
1.18
3/16 x 3/32
101
1.65
3/16 x 3/32
101
1.10
3/16 x 3/32
94
1.18
3/16 x 3/32
99
1.57
3/16 x 3/32
99
1.18
3/16 x 3/32
101
1.65
3/16 x 3/32
102
Speed
Reducers
Dimensions
Model
CNVX
CVVX [1]
6065DAY
6075DAY
6095DAY
6105DAY
6125DBY
6130/5DAY
6130/5DBY
6130/5DCY
6140/5DAY
6140/5DBY
6140/5DCY
Note: [1] Models 6065DA ~ 6215DB are type CNVX; models 6135DC ~ 6145DB are type CVVX
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.93
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.94
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, Shovel Base
Double Reduction
CVV-6160/5DCY 6215DBY-SB
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Speed
Reducers
Model
CVV
A
Dimensions
6160/5DCY-SB 13.39
6170/5DCY-SB 15.75
6180/5DBY-SB 16.93
6190/5DAY-SB 19.29
6190/5DBY-SB 19.29
6205DBY-SB
17.91
6215DAY-SB
19.29
6215DBY-SB
19.29
Model
CVV
6160/5DCY-SB
6170/5DCY-SB
6180/5DBY-SB
6190/5DAY-SB
6190/5DBY-SB
6205DBY-SB
6215DAY-SB
6215DBY-SB
4.94 Dimensions
B
10.6277
10.6245
12.4385
12.4350
13.5802
13.5767
15.7456
15.7421
15.7456
15.7421
13.9739
13.9704
15.3519
15.3484
15.3519
15.3484
U*
2.250
2.750
3.125
3.625
3.625
3.875
4.250
4.250
V
3.15
3.31
3.94
4.92
4.92
6.50
6.50
6.50
C
G
H
NO.
M
P
AH
18.19
0.79
0.43
6
3.50
0.16
12.20
20.04
0.87
0.55
8
3.70
0.20
14.17
22.72
0.87
0.71
8
4.33
0.20
15.35
24.76
1.18
0.71
12
5.71
0.24
17.72
25.71
1.18
0.71
12
5.71
0.24
17.72
27.76
1.18
0.87
8
8.03
0.20
15.94
28.78
1.38
0.94
8
7.99
0.28
17.32
30.71
1.38
0.94
8
7.99
0.28
17.32
Low Speed Shaft
S
3/8-16UNC
1/2-13UNC
1/2-13UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
3/4-10UNC
L1
0.71
0.94
0.94
1.34
1.34
1.34
1.34
1.34
Key
1/2 X 1/2 X 2.95
5/8 X 5/8 X 3.15
3/4 X 3/4 X 3.74
7/8 X 7/8 X 4.92
7/8 X 7/8 X 4.92
1 X 1 X 6.50
1 X 1 X 6.50
1 X 1 X 6.50
XU*
0.750
0.750
0.875
0.750
0.875
0.875
0.875
1.125
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.38
3/16 X 3/16 X 1.02
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.38
3/16 X 3/16 X 1.02
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.57
3/16 X 3/16 X 1.38
1.77
1/4 X 1/4 X 1.77
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.95
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, Shovel Base
Double Reduction
CVV-6160/5DCY 6215DBY-SB (cont.)
All dimensions are in inches
6160/5DCY-SB
6170/5DCY-SB
6180/5DBY-SB
6190/5DAY-SB
6190/5DBY-SB
6205DBY-SB
6215DAY-SB
6215DBY-SB
Dimensions
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
143T 145T
32.24
0.52
231
34.09
0.52
308
40.91
0.52
453
38.82
0.52
537
43.90
0.52
605
45.94
0.52
645
46.97
0.52
811
182T 184T
32.24
0.71
229
34.09
0.71
306
40.91
0.71
428
38.82
0.71
535
43.90
0.71
580
45.94
0.71
620
46.97
0.71
785
213T
215T
254T
256T
284T
286T
324T
326T
364T
365T
40.91
0.88
425
43.90
0.88
577
45.94
0.88
617
46.97
0.88
782
52.13
0.88
848
52.13
1.00
843
Speed
Reducers
Dimensions
Model
Cyclo® 6000 Series
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Dimensions 4.95
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.96
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, Shovel Base
Double Reduction
CVV-6225DAY 6265DAY-SB
*Shaft Tolerances
Shaft Nominal Diameter (inches) Tolerances (inches)
0.500 (1/2) through 0.625 (5/8)
+0.0000/-0.0004
0.750 (3/4) through 1.125 (1 1/8)
+0.0000/-0.0005
1.250 (1 1/4) through 1.875 (1 7/8) +0.0000/-0.0006
2.000 (2) through 3.125 (3 1/8)
+0.0000/-0.0007
3.250 (3 1/4) through 4.625 (4 5/8) +0.0000/-0.0009
4.750 (4 3/4) through 7.000 (7)
+0.0000/-0.0010
All dimensions are in inches
Model
CVV
Dimensions
Speed
Reducers
A
6225DAY-SB
21.06
6225DBY-SB
21.06
6235DAY-SB
22.44
6235DBY-SB
22.44
6245DAY-SB
25.00
6245DBY-SB
25.00
6255DAY-SB
26.97
6255DBY-SB
26.97
6265DAY-SB
29.53
Model
CVV
6225DAY-SB
6225DBY-SB
6235DAY-SB
6235DBY-SB
6245DAY-SB
6245DBY-SB
6255DAY-SB
6255DBY-SB
6265DAY-SB
4.96 Dimensions
U*
4.625
4.625
5.000
5.000
5.500
5.500
6.250
6.250
6.625
B
16.3359
16.3321
16.3359
16.3321
17.7139
17.7100
17.7139
17.7100
19.0918
19.0880
19.0918
19.0880
21.0600
21.0557
21.0600
21.0557
22.4380
22.4336
V
6.50
6.50
7.87
7.87
7.87
7.87
9.45
9.45
11.81
C
G
H
NO.
M
P
AH
30.43
1.38
1.06
8
8.27
0.39
18.70
33.86
1.38
1.06
8
8.27
0.39
18.70
34.76
1.57
1.06
8
9.84
0.39
20.08
36.93
1.57
1.06
8
9.84
0.39
20.08
36.26
1.57
1.30
8
9.84
0.39
22.05
38.39
1.57
1.30
8
9.84
0.39
22.05
42.56
1.77
1.30
8
11.61
0.39
24.02
44.61
1.77
1.30
8
11.61
0.39
24.02
48.94
1.97
1.54
8
14.17
0.39
25.98
Low Speed Shaft
S
3/4-10UNC
3/4-10UNC
1-8UNC
1-8UNC
1-8UNC
1-8UNC
1-1/4-7UNC
1-1/4-7UNC
1-1/4-7UNC
L1
1.34
1.34
1.61
1.61
1.61
1.61
1.93
1.93
1.93
Key
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 6.5
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/4 X 7/8 X 7.87
1-1/2 X 1 X 9.45
1-1/2 X 1 X 9.45
1-3/4 X 1-1/4 X 11.8
XU*
0.875
1.375
1.125
1.500
1.125
1.500
1.375
1.750
1.750
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
High Speed Shaft
XV
Key
1.57
3/16 X 3/16 X 1.38
2.17
5/16 X 5/16 X 2.17
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
1.77
1/4 X 1/4 X 1.77
2.56
3/8 X 3/8 X 2.56
2.17
5/16 X 5/16 X 2.17
2.76
3/8 X 3/8 X 2.76
2.76
3/8 X 3/8 X 2.76
Cyclo® 6000 Series
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.97
CYCLO® 6000 Speed Reducers
Dimensions Vertical V-Flange Mount, Shovel Base
Double Reduction
CVV-6225DAY 6265DAY-SB (cont.)
All dimensions are in inches
6225DAY-SB
6225DBY-SB
6235DAY-SB
6235DBY-SB
6245DAY-SB
6245DBY-SB
6255DAY-SB
6255DBY-SB
6265DAY-SB
Dimensions
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
C2
GAP
WT W/O MOTOR
143T
Cyclo® 6000 Series
145T
48.62
0.52
976
182T 184T
48.62
0.71
951
51.18
0.71
1168
52.68
0.71
1375
58.19
0.71
2082
213T 215T
48.62
0.88
948
52.91
0.88
1054
56.18
0.88
1190
56.22
0.88
1271
57.68
0.88
1397
57.68
0.88
1467
61.61
0.88
2090
71.54
1.00
2895
254T
256T
52.64
1.00
959
58.50
1.00
1118
56.18
1.00
1185
62.20
1.00
1324
57.68
1.00
1392
63.66
1.00
1520
67.20
1.00
2154
67.20
1.00
2290
71.54
1.00
2890
284T
286T
324T
326T
364T
365T
62.20
1.00
1316
63.66
1.00
1512
67.20
1.00
2146
72.28
1.00
2349
76.61
1.00
2949
72.26
1.50
2339
76.61
1.50
2939
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Speed
Reducers
Dimensions
Model
Dimensions 4.97
2916_14-sec4_38638_Sect4 11/24/14 7:50 PM Page 4.98
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Dimensions
Speed
Reducers
4.98 Dimensions
Dimensions shown are for reference only and are subject to change without notice, unless certified.
Certified prints are available after receipt of an order; consult factory.
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.1
CYCLO® 6000 Speed Reducers
5
Technical Information
Technical
Information
Speed
Reducers
Cyclo® 6000 Series
Technical Information 5.1
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.2
CYCLO® 6000 Speed Reducers
Lubrication
Cyclo® Reducers are either Grease lubricated or Oil lubricated.
Refer to pages 5.3 and 5.4 to determine the unit lubrication type.
• Grease lubricated reducers are filled with grease prior to
shipment and are ready for installation and operation
• Oil lubricated reducers must be filled with the proper
amount of approved oil before installation and operation
• Lubrication methods (grease or oil) are specified for
Cyclo® driven at standard input speed.
Oil Fill Level
Approved Greases
Oil Sight Gauge
Grease lubricated reducers are filled with grease prior to shipment and
are ready for installation and operation. This information is provided for
maintenance purposes.
Ambient Temperature
°F
°C
14 to 122 -10 to 50
Cyclo
Planetary
ExxonMobil
Shell Oil
Exxon Unirex N2 Grease Shell Gadus S2 V220
(NLGI Grade #2)
(0 Grease)
When the Cyclo® reducer will be used
under widely fluctuating temperatures or
ambient temperatures (other than those
listed here) or any other special conditions, consult the factory.
Lubrication
Speed
Reducers
Approved Oils
Oil lubricated reducers must be filled with oil prior to operation. Fill
the reducer to the correct level with the recommended oil.
ExxonMobil
Spartan EP
Mobil
Mobilgear 600XP
Shell
Omala S2 G
Idemitsu
Kluber
Caltex
Daphne Super Gear Oil
Kluberoil GEM1
Meropa
BP
Energol GR-XP
Castrol
Alpha SP
Gulf
EP Lubricant HD
Ambient Temperature
°F
°C
14
-10
ISO VG
32
0
50
10
68
20
86
30
104
40
68
100 / 150
122
50
For use in winter or relatively low
ambient temperatures, use the lower
viscosity oil specified for each
ambient temperature range.
For consistent use in ambient temperatures outside of the range 32°F to
104°F (0°C to 40°C), consult
factory.
220 / 320 / 460
5.2 Technical Information
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.3
CYCLO® 6000 Speed Reducers
Lubrication continued
HORIZONTAL Mounted Reducer • SINGLE Reduction • Frame Sizes 6060 to 6275
Frame Size
6060, 6065
6070, 6075
6080. 6085
6090, 6095
6100, 6105, 610H
6110, 6115
6120, 6125, 612H
6130, 6135
6140, 6145, 614H
6160, 6165, 616H
6170, 6175
6180, 6185
6190, 6195
6205
6215
6225
6235
6245
6255
6265
6275
3
5
6
8
11
13
Reduction Ratio
17
21
25
15
29
35
43
51
59
71
87
119
59
87
Grease
Maintenance Free Grease
Oil
HORIZONTAL Mounted Reducer • DOUBLE Reduction • Frame Sizes 6060DA to 6275DA
6060DA, 6065DA
6070DA, 6075DA
6090DA, 6095DA
6100DA, 6105DA
6120DA, 6125DA
6120DB, 6125DB
6130DA, 6135DA
6130DB, 6135DB
6130DC, 6135DC
6140DA, 6140DB, 6140DC
6145DA, 6145DB, 6145DC
6160DA, 6165DA
6160DB, 6165DB
6170DA, 6175DA
6170DB, 6175DB
6180DA. 6185DA
6160DC, 6165DC
6170DC, 6175DC
6180DB. 6185DB
6190DA, 6195DA
6190DB, 6195DB
6205DA, 6205DB
6215DA, 6215DB
6225DA, 6225DB
6235DA, 6235DB
6245DA, 6245DB
6255DA, 6255DB
6265DA
6275DA
Reduction Ratio
104 121 143 165 195 231 273 319 377 473 559 649 731 841 1003 1015 1247 1479 1849 2065 2537 3045 3481 4437 5133 6177 7569
2537
5133
Maintenance Free Grease
Speed
Reducers
Grease
Lubrication
Frame Size
165
121
Oil
377
Cyclo® 6000 Series
Technical Information 5.3
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.4
CYCLO® 6000 Speed Reducers
Lubrication continued
VERTICAL Mounted Reducer • SINGLE Reduction • Frame Sizes 6060 to 6275
Frame Size
6060, 6065
6070, 6075
6080. 6085
6090, 6095
6100, 6105
6110, 6115
6120, 6125
6130, 6135
6140, 6145
6160, 6165
6170, 6175
6180, 6185
6190, 6195
6205
6215
6225
6235
6245
6255
6265
6275
3
5
6
8
11
13
Reduction Ratio
17
21
25
15
29
35
43
51
59
71
87
119
59
87
Grease
Maintenance Free Grease
Oil
Forced Oil
VERTICAL Mounted Reducer • DOUBLE Reduction • Frame Sizes 6060DA to 6275DA
Frame Size
Lubrication
Speed
Reducers
6060DA, 6065DA
6070DA, 6075DA
6090DA, 6095DA
6100DA, 6105DA
6120DA, 6125DA
6120DB, 6125DB
6130DA, 6135DA
6130DB, 6135DB
6130DC, 6135DC
6140DA, 6140DB, 6140DC
6145DA, 6145DB, 6145DC
6160DA, 6165DA
6160DB, 6165DB
6170DA, 6175DA
6170DB, 6175DB
6180DA, 6185DA
6160DC, 6165DC
6170DC, 6175DC
6180DB, 6185DB
6190DA, 6195DA
6190DB, 6195DB
6205DA, 6205DB
6215DA, 6215DB
6225DA, 6225DB
6235DA, 6235DB
6245DA, 6245DB
6255DA, 6255DB
6265DA
6275DA
5.4 Technical Information
Reduction Ratio
104 121 143 165 195 231 273 319 377 473 559 649 731 841 1003 1015 1247 1479 1849 2065 2537 3045 3481 4437 5133 6177 7569
2537
5133
Maintenance Free Grease
Grease
473
841
1015
2065
1849
121
Forced Oil
2537
377
Cyclo® 6000 Series
CYCLO® 6000 Speed Reducers
Lubrication continued
Oil Fill Quantities
Cyclo Horizontal Foot Mounted (CHH...) / Cyclo Horizotal V-Flange Mounted (CHV...)
Size
US gal
liter
Size
US gal
liter
Size
US gal
liter
613X
0.18
0.7
616XDC
0.40
1.5
6245DB
4.8
18
614X
0.18
0.7
617XDC
0.63
2.4
6255DA
6.1
23
616X
0.37
1.4
618XDB
0.92
3.5
6255DB
6.1
23
617X
0.50
1.9
619XDA
1.5
5.8
6265DA
8.5
32
618X
0.66
2.5
619XDB
1.6
6
6275DA
15.9
60
Size
US gal
liter
Size
US gal
liter
Size
US gal
liter
613X
0.29
1.1
616XDC
0.26
1
6245DB
7.7
29
614X
0.29
1.1
617XDC
0.50
1.9
6255DA
11.1
42
616X
0.26
1
618XDB
0.53
2
6255DB
11.1
42
617X
0.50
1.9
619XDA
0.71
2.7
6265DA
13.5
51
618X
0.53
2
619XDB
0.71
2.7
6275DA
(15.85)
(60.00)
619X
1.1
4
6205DA
1.6
6
6205
1.5
5.5
6205DB
1.6
6
6215
2.2
8.5
6215DA
2.6
10
6225
2.6
10
6215DB
2.6
10
6235
4.0
15
6225DA
2.9
11
6245
4.2
16
6225DB
2.9
11
6255
5.5
21
6235DA
4.5
17
6265
7.7
29
6235DB
4.5
17
6275
14.8
56
6245DA
4.8
18
6235
3.2
12
6225DA
4.8
18
6245
4.0
15
6225DB
4.8
18
6255
11.1
42
6235DA
6.1
23
6265
13.5
51
6235DB
6.1
23
6275
(15.9)
(60)
6245DA
7.7
29
6235
2.0
7.5
6225DA
1.6
6
6245
2.1
8
6225DB
1.6
6
6255
2.9
11
6235DA
2.5
9.5
6265
3.7
14
6235DB
2.5
9.5
6275
7.9
30
6245DA
2.6
10
Cyclo Vertical V-Flange Mounted (CVV...)
619X
0.71
2.7
6205DA
2.9
11
6205
1.5
5.7
6205DB
2.9
11
6215
2.0
7.5
6215DA
3.7
14
6225
2.6
10
6215DB
3.7
14
Cyclo Horizontal Flange Mounted (CHF...)
Size
US gal
liter
Size
US gal
liter
Size
US gal
liter
613X
0.07
0.25
616XDC
0.26
1
6245DB
2.6
10
614X
0.07
0.25
617XDC
0.53
2
6255DA
3.4
13
616X
0.24
0.9
618XDB
0.61
2.3
6255DB
3.4
13
617X
0.40
1.5
619XDA
1.0
3.8
6265DA
4.5
17
618X
0.34
1.3
619XDB
1.1
4
619X
0.53
2
6205DA
1.1
4
6205
0.79
3
6205DB
1.1
4
6215
1.1
4
6215DA
1.5
5.5
6225
1.3
5
6215DB
1.5
5.5
X = 0 or 5
( ) = With Trochoid Pump
Lubrication
Oil Fill Level
Horizontal
Flange Mount
Horizontal
Vertical
Vertical
Sizes 6130/5 and 6140/5 only
Cyclo® 6000 Series
Technical Information 5.5
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.6
CYCLO® 6000 Speed Reducers
Lubrication continued
Grease
Fill
illFill
Q
Quantities
for
or Maintenance
Mainfor Maintenance
Free
ee Speed Reduc
Reducers
ers Speed Reducers
Grease
Quantities
Free
oz. (g)
Size
606X
607X
608X
609X
610X
611X
612X
606XDA
607XDA
609XDA
A
610XDA
612XDA
612XD
612XDB
Speed
Reduction
Mechanism
(1st stage)
0.9
(25)
0.9
(25)
2.3
(65)
3.2
(90)
4.9
(140)
7.1
(200)
11.6
(330)
0.9
(25)
0.9
(25)
0.9
(25)
0.9
(25)
0.9
(25)
3.2
(90)
0.9
(25)
0.9
(25)
3.2
(90)
4.9
(140)
11.6
(330)
11.6
(330)
1.2
(35)
1.2
(35)
3.5
(100)
3.5
(100)
4.2
(120)
4.2
(120)
Speed
Reduction
Mechanism
(2nd stage)
Slow Speed
Shaft Bearing
1.2
(35)
1.2
(35)
2.5
(70)
3.5
(100)
3.5
(100)
3.2
(90)
4.2
(120)
X = 0 or 5
Grease
Fill
Quantities
for Non-Maintenance
Free
Speed Reducers
Grease Fill
ill
Q
Quantities
for
or Non-Maintenanc
Non-Main
enance Free
ee Speed
Reducers
Reduc
oz. (g)
Size
Speed
Reduction
Mechanism
(1st stage)
0.9
(25)
2.1
(60)
4.2
(120)
0.9
(25)
2.1
(60)
4.2
(120)
2.1
(60)
4.2
(120)
8.8
(250)
2.1
(60)
4.2
(120)
8.8
(250)
Speed
Reduction
Mechanism
(2nd stage)
15.9
(450)
15.9
(450)
15.9
(450)
15.9
(450)
15.9
(450)
15.9
(450)
26.5
(750)
26.5
(750)
26.5
(750)
35.3
(1000)
35.3
(1000)
35.3
(1000)
Slow Speed
Shaf
Shaft Bearing
10.6
(300)
10.6
(300)
10.6
(300)
10.6
(300)
10.6
(300)
10.6
(300)
10.6
(300)
10.6
(300)
10.6
(300)
17.6
(500)
17.6
(500)
17.6
(500)
Size
Lubrication
Speed
Reducers
613XDA 613XDB 613XDC 614XDA 614XDB 614XDC 616XD
616XDA 616XDB 616XDC 617XDA 617XDB 617XDC
618XDA 618XDB 619XDA
619XD 619XDB 6205D
6205DA 6205DB 6215DA
6215D 6215DB 6225DA
6225D 6225DB 6235D
6235DA 6235DB
Speed
Reduction
Mechanism
(1st stage)
4.2
(120)
15.9
(450)
11.6
(330)
15.9
(450)
11.6
(330)
15.9
(450)
15.9
(450)
26.5
(750)
15.9
(450)
35.3
(1000)
26.5
(750)
38.8
(1100)
Speed
Reduction
Mechanism
(2nd stage)
38.8
(1100)
38.8
(1100)
52.9
(1500)
52.9
(1500)
52.9
(1500)
52.9
(1500)
70.5
(2000)
70.5
(2000)
88.2
(2500)
88.2
(2500)
141.1
(4000)
141.1
(4000)
Slow Speed
Shaft Bearing
21.2
(600)
21.2
(600)
24.7
(700)
24.7
(700)
24.7
(700)
24.7
(700)
28.2
(800)
28.2
(800)
31.7
(900)
31.7
(900)
35.3
(1000)
35.3
(1000)
Size
6245DA 6245DB 6255D
6255DA 6255DB 6265DA
6265D
Speed
Reduction
Mechanism
(1st stage)
26.5
(750)
38.8
(1100)
35.3
(1000)
52.9
(1500)
52.9
(1500)
Speed
Reduction
Mechanism
(2nd stage)
158.7
(4500)
158.7
(4500)
211.6
(6000)
211.6
(6000)
282.2
(8000)
Slow Speed
Shaft Bearing
38.8
(1100)
38.8
(1100)
42.3
(1200)
42.3
(1200)
45.9
(1300)
X = 0 or 5
5.6 Technical Information
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.7
CYCLO® 6000 Speed Reducers
Lubrication continued
Grease Quantites for Units Normally Oil Lubricated
Standard Grease for Normally Oil Lubricated Units
Grease Quantities for Normally Oil Lubricated Units
Optional Greases
Note 1
Note 1
Lubrication
Speed
Reducers
Optional Oils
Cyclo® 6000 Series
Technical Information 5.7
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.8
CYCLO® 6000 Speed Reducers
Overhung Loads • Slow Speed Shaft
Overhung Loads are loads that act perpendicular to the reducer shaft. Each reducer has a maximum allowable overhung load (OHL)
capacity, which is shown in the Frame Size Selection Tables for each reducer. In applications with an OHL, it is critical that the OHL is
calculated and that the chosen reducer is adequately sized for the maximum OHL.
How to Calculate Overhung Load (OHL)
Centerline of Load
Step 1. Measure distance X from reducer collar surface
to the centerline of the OHL.
X
Collar
Surface
Step 2. Determine Lf (Load Location Factor) for your chosen Frame Size,
using Load Location Factor Table on the next page.
Step 3. Determine Cf (Connection Factor) and Fs (Shock Factor) from the tables below:
Load Connection Factor (Cf)
CONNECTION TYPE
General Purpose Chain Single Row
General Purpose Chain Double Row
Machined Gear or Pinion
Synchronous Belt
V-Belt
Flat Belt
Shock Factor (Fs)
Cf
1.0
1.25
1.25
1.50
1.50
2.50
SHOCK FACTORr
No Shock
Moderate Shock
Heavy Shock
Fs
1.0
1.3
1.6
Step 4. Apply Lf, Cf and Sf to the formula to calculate the OHL.
Pr =
Tl =
Pr =
Overhung
Loads
Speed
Reducers
Tl <
Pro
R
Lf • Cf • Fs
(lbs, N)
R=
Pro =
Cf =
Fs =
Lf =
Actual radial load
Actual transmitted torque on slow speed shaft of reducer
(lb • in, N • m)
Pitch circle radius of sprocket, gear, pulley, ect. (inch, meter)
Allowable radial load (lbs, N)
Coupling factor
Shock factor
Load location factor
Note: When the Slow Speed Shaft is under both Radial and Axial Load, calculate Overhung Load first and
proceed with calculations on Axial Loads page 5.10
Step 5. Refer back to the Frame Size Selection Tables (pp. 3.1–3.32) to determine maximum
allowable OHL capacity for the selected Frame Size.
If the calculated OHL does not exceed the OHL capacity (from Selection Table),
the selected Frame Size is acceptable.
If the calculated OHL exceeds the OHL capacity, there are two standard options
that can increase the OHL capacity of a reducer:
• High Capacity Bearings Option–R1
• Ductile Iron Housing & High Capacity Bearings Option–R2
If neither of these options adequately increase the OHL capacity:
1. Choose the next larger Frame Size, or
2. Move the OHL closer to the collar surface, or
3. Decrease the OHL by increasing the pitch diameter of the connecting drive.
Be sure to recalculate and verify the OHL capacity for the new frame size.
5.8 Technical Information
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.9
CYCLO® 6000 Speed Reducers
Overhung Loads, Slow Speed Shaft
continued
Load Location Factors (Lf), Slow Speed Shaft
X (inches)
1/4
1/2
3/4
1
1 1/4 1 1/2 1 3/4
2
2 1/2
3
3 1/2
4
4 1/2
5
6
7
8
9
10
11
0.86
0.85
0.83
0.88
1.08
0.96
0.91
0.95
1.49 —
—
1.23 1.61 —
1.01 1.30 1.63
1.10 1.40 1.73
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.88
0.95
1.10 1.40 1.73
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.80
0.87
0.95 1.02 1.12
1.30 1.51
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.85
0.91 0.98 1.14
1.36 1.57
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.86 0.92 0.97
1.08 1.24
1.40 1.72
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.74 0.82
0.91 0.99
1.12 1.37
1.62
1.88
—
—
—
—
—
—
—
—
—
—
—
—
0.87 0.91
0.95 1.00
1.13 1.39
1.67
1.94
—
—
—
—
—
—
—
—
—
—
—
—
0.89 0.93
0.96 1.00
1.13 1.39
1.67
1.94
—
—
—
—
—
—
—
—
—
—
—
—
0.85 0.88
0.92 0.95
0.99 1.15
1.37
1.58
—
—
—
—
—
—
—
—
—
—
—
—
—
0.86
0.88 0.91
0.93 0.99
1.13
1.30
1.48
1.67
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.78
0.78
0.90
0.85
0.86
0.83
—
—
0.95
0.95
0.98
0.93
0.93
0.89
0.84
—
1.04
1.04
1.02
0.97
0.97
0.93
0.88
0.71
1.13
1.14
1.06
1.00
1.00
0.95
0.90
0.76
1.22
1.23
1.10
1.04
1.04
0.99
0.93
0.80
1.31
1.32
1.14
1.08
1.08
1.02
0.95
0.85
1.49
1.50
1.23
1.16
1.15
1.08
1.02
0.95
—
—
—
1.23
1.22
1.21
1.16
1.08
—
—
—
—
—
1.38
1.31
1.23
—
—
—
—
—
1.54
1.47
1.37
—
—
—
—
—
—
—
—
—
—
—
—
1.64 1.80
1.52 1.67
0.74
0.73
0.88
0.84
0.84
—
—
—
0.86
0.86
0.94
0.89
0.90
0.86
—
—
Speed
Reducers
Overhung
Loads
Frame Size
Single
Double
Reduction
Reduction
6060, 6065 6060DA, 6065DA
6070, 6075 6070DA, 6075DA
6080, 6085
—
6090, 6095 6090DA, 6095DA
6100
6105
6100DA, 6105DA
610H
6110, 6115
—
6120, 6125 6120DA, 6120DB
612H
6125DA, 6125DB
6130DA, 6130DB
6130 6135 6130DC, 6135DA
6135DB, 6135DC
6140
6140DA, 6140DB
6145
6140DC, 6145DA
614H
6145DB, 6145DC
6160
6160DA, 6160DB
6165
6160DC, 6165DA
616H
6165DB, 6165DC
6170
6170DA, 6170DB
6175
6170DC, 6175DA
6180
6180DA, 6180DB
6185
6185DA, 6185DB
6190
6190DA, 6190DB
6195
6195DA, 6195DB
6205
6205DA, 6205DB
6215
6215DA, 6215DB
6225
6225DA, 6225DB
6235
6235DA, 6235DB
6245
6245DA, 6245DB
6255
6255DA, 6255DB
6265
6265DA
6275
6275DA
Cyclo® 6000 Series
Technical Information 5.9
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.10
CYCLO® 6000 Speed Reducers
Overhung Loads, Slow Speed Shaft
continued
High Capacity Bearings Option
Type R1
Slow Speed Shaft Overhung Load Capacity (lbs.)
Frame Size
Single
Double
Reduction
Reduction
6130DA, 6130DB
6130, 6135 6130DC, 6135DA
6135DB, 6135DC
6160
6160DA, 6160DB
6165
6160DC, 6165DA
616H
6165DB, 6165DC
6170DA, 6170DB
6170
6170DC, 6175DA
6175
6175DB, 6175DC
6180
6180DA, 6180DB
6185
6185DA, 6185DB
6190
6190DA, 6190DB
6195
6195DA, 6195DB
Frame Size
Single
Double
Reduction
Reduction
6130DA, 6130DB
6130, 6135 6130DC, 6135DA
6135DB, 6135DC
6160
6160DA, 6160DB
6165
6160DC, 6165DA
616H
6165DB, 6165DC
6170DA, 6170DB
6170
6170DC, 6175DA
6175
6175DB, 6175DC
6180
6180DA, 6180DB
6185
6185DA, 6185DB
6190
6190DA, 6190DB
6195
6195DA, 6195DB
Output Shaft Speed (RPM)
10 & Below
15
20
25
30
35
40
50
3310
3310
3310
3310
3310
3310
3310
3310
4960
4960
4960
4960
4960
4960
4960
4960
6640
6640
6640
6640
6640
6640
6640
6640
9370
9370
9370
9370
9370
9370
9370
9370
13200
13200
13200
13200
13200
13200
13200
12400
Output Shaft Speed (RPM)
60
80
100
125
150
200
250
300
3310
3170
3040
2820
2670
2450
2290
2170
4960
4960
4850
4520
4280
3920
3660
3460
6640
6640
6590
6150
5820
5360
4980
4740
9370
9280
8660
8140
7690
7050
—
—
11900
10600
9900
9220
8600
7800
—
—
Overhung
Loads
Speed
Reducers
5.10 Technical Information
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.11
CYCLO® 6000 Speed Reducers
Overhung Loads, Slow Speed Shaft
continued
Ductile Iron Housing and High Capacity Bearings Option
Type R2
Slow Speed Shaft Overhung Load Capacity (lbs.)
Frame Size
Single
Double
Reduction
Reduction
6130DA, 6130DB
6130, 6135 6130DC, 6135DA
6135DB, 6135DC
6160
6160DA, 6160DB
6165
6160DC, 6165DA
616H
6165DB, 6165DC
6170DA, 6170DB
6170
6170DC, 6175DA
6175
6175DB, 6175DC
6180
6180DA, 6180DB
6185
6185DA, 6185DB
6190
6190DA, 6190DB
6195
6195DA, 6195DB
6205
6205DA, 6205DB
6215
6215DA, 6215DB
6225
6225DA, 6225DB
6235
6235DA, 6235DB
6245
6245DA, 6245DB
6255
6255DA, 6255DB
6265
6265DA
6275
6275DA
Output Shaft Speed (RPM)
4 & Below
5
6
8
10
15
20
25
30
35
5400
5400
5400
5400
5400
5360
4890
4590
4340
4140
7560
7560
7560
7560
7560
7560
7560
7470
7080
6770
10300
10300
10300
10300
10300
10300
10300
10200
9630
9190
12500
12500
12500
12500
12500
12500
12500
12500
12500
12100
16100
16100
16100
16100
16100
16100
16100
16100
15600
14900
22000
29800
36200
41200
50000
61500
63500
61100
22000
28200
35100
41200
47000
58000
63500
61100
22000
26700
33300
41200
44500
54900
63500
61100
22000
24500
30400
38100
40800
50300
60600
61100
22000
—
28200
35700
37900
47200
56900
61100
20000
—
25100
31700
33700
41700
50300
61100
—
—
23100
28900
31100
38100
46100
61100
—
—
21600
27100
28900
35700
43000
61100
—
—
20500
25600
27300
34000
40800
61100
—
—
19600
24500
26000
32400
39000
—
Output Shaft Speed (RPM)
40
50
60
80
100
125
150
200
250
300
3990
3700
3510
3240
3040
2820
2670
2450
2290
2170
6500
6060
5750
5290
4940
4610
4370
4010
3730
3460
8840
8270
7830
7170
6720
6260
5930
5470
4980
4740
11700
10900
10300
9460
8860
8290
7850
7190
—
—
14300
13400
12700
11600
10800
10100
9610
8840
—
—
—
—
18800
23600
25100
31300
37300
—
—
—
17500
22000
23600
28900
35100
—
—
—
16600
20900
22300
27600
33300
—
—
—
15300
19200
20400
25100
30400
—
—
—
14300
17900
19100
23600
28200
—
—
—
13400
16700
17800
22000
26500
—
—
—
12700
—
—
—
—
—
—
—
11600
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Cyclo® 6000 Series
Speed
Reducers
Overhung
Loads
Frame Size
Single
Double
Reduction
Reduction
6130DA, 6130DB
6130, 6135 6130DC, 6135DA
6135DB, 6135DC
6160
6160DA, 6160DB
6165
6160DC, 6165DA
616H
6165DB, 6165DC
6170DA, 6170DB
6170
6170DC, 6175DA
6175
6175DB, 6175DC
6180
6180DA, 6180DB
6185
6185DA, 6185DB
6190
6190DA, 6190DB
6195
6195DA, 6195DB
6205
6205DA, 6205DB
6215
6215DA, 6215DB
6225
6225DA, 6225DB
6235
6235DA, 6235DB
6245
6245DA, 6245DB
6255
6255DA, 6255DB
6265
6265DA
6275
6275DA
Technical Information 5.11
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.12
CYCLO® 6000 Speed Reducers
Axial Loads
How to Calculate Axial Loads
Axial Loads are loads that act parallel to the reducer shaft. Each reducer
has a maximum allowable axial load capacity, which is shown in table below.
When the maximum allowable axial load exceeds the capacity shown in the
table, the next larger frame size should be chosen.
When axial and overhung loads are combined to act on the Slow Speed Shaft, this
formula is used to determine if the combined
loading is acceptable for the selected Cyclo®
reducer.
Formula for Combined Radial and
Axial Load on Slow Speed Shaft
Axial Load, PA
Pa <
Pao
Cf • Fs
(lbs, N)
• Lf
( PrPro
+
Pa
Pao
) • Cf • Fs < 1
Pr =
Lf =
Pro =
Pa =
Pao =
Cf =
Fs =
Actual Overhung Load
Load Location Factor
Allowable Overhung Load
Actual Axial Load (lbs, N)
Allowable Axial Load (lbs,N)
Coupling Factor
Shock Factor
If the calculated loads exceed the limits shown below in Axial Load Capacity Table:
1. Decrease the OHL by moving the load closer to the shaft collar or by increasing the pitch
diameter of the connecting device,
or
2. Select the next larger frame size. Repeat the Axial Load calculation to verify the selection.
Axial Load Capacity, Slow Speed Shaft (lbs.)
Axial
Loads
Speed
Reducers
Single
Reduction
6060 6065
6070 6075
6080 6085
6090 6095
6100 6105
610H
6110 6115
6120 6125
612H
6130 6135
6140 6145
614H
6160 6165
616H
6170 6175
6180 6185
6190 6195
6205
6215
6225
6235
6245
6255
6265
6275
Frame Size
Double
Reduction
6060DA 6065DA
6070DA 6075DA
—
6090DA 6095DA
-10
15
20
25
30
35
40
50
60
80
100
125
150
200
250
300
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
66
176
221
221
—
176
221
221
—
176
221
221
6100DA 6105DA
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
—
6120DA 6120DB
6125DA 6125DB
6130DA 6130DB 6130DC
6135DA 6135DB 6135DC
6140DA 6140DB 6140DC
6145DA 6145DB 6145DC
6160DA 6160DB 6160DC
6165DA 6165DB 6165DC
6170DA 6170DB 6170DC
6175DA 6175DB 6175DC
6180DA 6180DB
6185DA 6185DB
6190DA 6190DB
6195DA 6195DB
6205DA 6205DB
6215DA 6215DB
6225DA 6225DB
6235DA 6235DB
6245DA 6245DB
6255DA 6255DB
6265DA
6275DA
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
661
661
661
661
661
661
661
661
661
661
661
661
661
623
562
537
881
881
881
881
881
881
881
881
881
881
881
881
881
881
881
881
1214
1214
1214
1214
1214
1214
1214
1214
1214
1176
1093
1025
982
866
825
776
1545
1545
1545
1545
1545
1545
1545
1545
1545
1545
1545
1545
1545
1416
1281
—
2205
2205
2205
2205
2205
2205
2205
2205
2205
2205
2205
2176
2028
1819
1648
1547
3080
3080
3080
3080
3080
3080
3080
3080
3080
3080
3080
2945
2810
2473
—
—
4406
4406
4406
4406
4406
4406
4406
4406
4159
3934
3462
—
—
3979 3754
4069 3867
4204 3957
5081 4744
5643 5283
7262 6835
9353 8746
13242 13242
3530
3642
3754
4519
5013
6407
8386
—
3192
3305
3440
4182
4721
6025
7824
—
2968
3080
3237
3979
4474
5733
7419
—
2878
2968
3058
3754
4294
5441
6992
—
2765
2878
2945
—
—
—
—
—
2540
2653
2720
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
5.12 Technical Information
Output Shaft Speed (RPM)
4406
4406
4406
5958
6183
6610
7936
8386
10814
11691
13242
5283
5508
5755
7059
7599
9690
11691
13242
4744 4406 4182 4069
4969 4631 4406 4182
5216 4879 4631 4406
6385 5958 5621 5283
6947 6475 6138 5868
8858 8296 7891 7554
11466 10679 10072 9622
13242 13242 13242 13242
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:37 PM Page 5.13
CYCLO® 6000 Speed Reducers
Overhung Loads • High Speed Shaft
Overhung Loads are loads that act perpendicular to the reducer shaft. Each reducer has a maximum allowable overhung load
(OHL) capacity, which is shown in the Frame Size Selection Tables for each reducer. In applications with an OHL, it is critical that the
OHL is calculated and that the chosen reducer is adequately sized for the maximum OHL.
How to Calculate Overhung Load (OHL)
Centerline of Load
Step 1. Measure distance X from reducer collar surface
to the centerline of the OHL.
L
Lo
Step 2. Determine Lf (Load Location Factor) for your chosen Frame Size,
using Load Location Factor Table on the next page.
Step 3. Determine Cf (Connection Factor) and Fs (Shock Factor) from the tables below:
Shock Factor (Fs)
Load Connection Factor (Cf)
CONNECTION TYPE
General Purpose Chain Single Row
General Purpose Chain Double Row
Machined Gear or Pinion
Synchronous Belt
V-Belt
Flat Belt
Cf
1.0
1.25
1.25
1.50
1.50
2.50
SHOCK FACTOR
No Shock
Moderate Shock
Heavy Shock
Fs
1.0
1.3
1.6
Step 4. Apply Lf, Cf and Sf to the formula to calculate the OHL.
Tl <
Pro
R
Lf • Cf • Fs
(lbs, N)
R=
Pro =
Cf =
Fs =
Lf =
Actual radial load
Actual transmitted torque on slow speed shaft of reducer
(lb • in, N • m)
Pitch circle radius of sprocket, gear, pulley, ect. (inch, meter)
Allowable radial load (lbs, N)
Coupling factor
Shock factor
Load location factor
Speed
Reducers
Overhung
Loads
Pr =
Pr =
Tl =
Step 5. Refer back to the OHL Capacity Table to determine maximum
allowable OHL capacity for the selected Frame Size.
If the calculated OHL does not exceed the OHL capacity (from Selection Table), the
selected Frame Size is acceptable.
If the calculated OHL exceeds the OHL capacity, you must choose the next larger
Frame Size. Be sure to recalculate and verify the OHL capacity for the new frame size.
Cyclo® 6000 Series
Technical Information 5.13
1144_15-sec5_38638_Sect5 4/27/15 6:38 PM Page 5.14
CYCLO® 6000 Speed Reducers
Overhung Loads, High Speed Shaft
continued
Load Location Factors (Lf), High Speed Shaft
Frame Size
Single Reduction
Double Reduction
6060 6065
6060DA 6065DA 6070DA 6075DA
6090DA 6095DA 6100DA 6105DA
6070 6075
6120DA 6125DA 6130DA 6135DA
6140DA 6145DA
6080 6085
—
6120DB 6125DB 6130DB 6135DB
6090 6095
6140DB 6145DB 6160DA 6165DA
6170DA 6175DA
6130DC 6135DC 6140DC 6145DC
6100 6105 610H 6160DB 6165DB 6170DB 6175DB
6180DA 6185DA
6110 6115
—
6160DC 6165DC 6170DC 6175DC
6120 6125 612H
6190DA 6195DA 6205DA
6180DB 6185DB 6190DB 6195DB
6130 6135
6205DB 6215DA 6225DA
6140 6145 614H
—
6160 6165 616H
6125DB 6235DA 6245DA
6170 6175
6255DA 6255DB
6180 6185
6235DB 6245DB
6190 6195
6255DB 6265DA 6275DA
6205
—
6215
—
6225
—
6235
—
6245
—
6255
—
6265
—
6275
—
L (inch)
1 1/4 1 1/2 1 3/4 2 2 1/2 3
— — — — — —
1/4 1/2 3/4
0.78 1.07 1.52
1
—
3 1/2 4
— —
4 1/2
—
5
—
0.78 1.07 1.52
—
—
—
—
—
—
—
—
0.78 1.07 1.52
—
—
—
—
—
—
—
0.90 1.09 1.52 2.03
—
—
—
—
—
0.93 1.09 1.52 2.03
—
—
—
—
0.93 1.09 1.52 2.03
—
—
—
—
0.87 1.10 1.43 1.77 2.12
5 1/2 6
— —
6 1/2
—
7
—
7 1/2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.84 0.98 1.25 1.53 1.83 2.11
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.84 0.98 1.25 1.53 1.83 2.11 — — —
— — — —
0.94 0.97 1.06 1.22 1.36 1.51 1.66 — —
— — — —
— 0.95 0.99 1.09 1.23 1.38 1.51 1.79 2.08 — — — —
— — 0.96 1.01 1.11 1.24 1.37 1.63 1.88 2.15 — — —
— — 0.95 0.99 1.06 1.15 1.26 1.47 1.69 1.90 — — —
— — 0.93 0.96 0.99 1.04 1.11 1.26 1.40 1.55 1.70 1.84 —
— — 0.93 0.96 0.99 1.03 1.09 1.23 1.36 1.50 1.63 1.76 —
— — 0.94 0.97 0.99 1.02 1.04 1.10 1.20 1.32 1.43 1.55 —
— — 0.84 0.86 0.88 0.93 0.99 1.10 1.22 1.33 1.45 1.57 —
— — 0.91 0.93 0.95 0.98 1.00 1.10 1.21 1.32 1.43 1.54 —
— —
— — 0.93 0.94 0.96 1.00 1.07 1.15 1.23 1.31 1.39
— —
— — 0.93 0.94 0.96 1.00 1.07 1.15 1.23 1.31 1.39
— —
— — — — 0.94 0.98 1.02 1.13 1.23 1.34 1.45
—
—
—
—
—
—
—
—
—
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
1.47 1.55 1.63 1.71 —
1.47 1.55 1.63 1.71 —
1.56 1.66 1.77 1.90 2.00
Overhung
Loads
Speed
Reducers
5.14 Technical Information
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:38 PM Page 5.15
CYCLO® 6000 Speed Reducers
Overhung Loads, High Speed Shaft
continued
Overhung Load Capacity, High Speed Shaft (lbs.)
Frame Size
Input Speed (RPM)
Single
Reduction
Double
Reduction
Ratio
1750
1450
1165
980
870
720
580
6060 6065
6060DA 6065DA 6070DA 6075DA
6~17, 25~35
21, 43
44
17.6
33
6.6
33
11
44
11
44
11
44
11
44
11
6070 6075
6090DA 6095DA 6100DA 6105DA
6120DA 6125DA 6130DA 6135DA
6140DA 6145DA
6~17, 25~35, 51, 59
21, 43
44
11
33
11
33
11
44
11
44
11
44
33
44
44
6080 6085
—
6~15, 21, 29, 43~59, 87
17, 35, 71
44
11
33
11
33
11
44
11
44
11
44
33
44
44
6~17, 25~71, 119
21, 87
66
44
66
44
66
44
66
44
66
55
66
55
66
66
6~11, 17~119
13, 15
99
99
99
77
110
99
121
110
132
110
132
121
132
132
6, 8, 21~87
11~17
6~17
21~87
6~17, 21
25~87
6, 8
11~21
25
29~87
6~25, 51, 59
29~43, 71, 87
11~87
11~87
11~25
29~87
11~87
11~87
11~87
11~87
11~87
11~87
11~87
29~87
99
44
133
121
308
288
308
277
243
121
398
243
463
618
683
596
1214
1290
1488
—
—
—
—
—
77
44
155
99
308
288
308
220
254
133
398
265
463
573
683
573
1104
1147
1302
—
—
—
—
—
99
44
166
110
308
288
308
243
265
133
441
288
508
618
728
638
1214
1223
1344
2248
2496
2653
2653
3305
110
44
175
121
342
308
342
265
288
155
463
308
508
661
794
661
1324
1378
1378
2140
2271
2428
2428
3305
110
55
198
133
364
330
364
277
297
155
486
308
528
683
816
706
1367
1423
1488
2062
2271
2540
2540
3305
121
55
198
198
387
353
387
297
308
155
486
353
551
751
881
751
1401
1533
1567
2019
2383
2765
2765
3305
132
66
198
198
418
398
418
330
330
243
486
398
596
771
881
816
1389
1632
1686
1963
2518
2945
2945
3305
6090 6095
6100 6105 610H
6110 6115
6120DB 6125DB 6130DB 6135DB
6140DB 6145D 6160DA 6165DA
6170DA 6175DA
6130DC 6135DC 6140DC 6145DC
6160DB 6165DB 6170DB 6175DB
6180DA 6185DA
—
6140 6145 614H
—
6160 6165 616H
6125DB 6235DA 6245DA
6170 6175
6180 6185
6255DA 6225DB
6235DB 6245DB
6190 6195
6255DB 6265DA 6275DA
6205
6215
6225
6235
6245
6255
6265
6275
—
—
—
—
—
—
—
—
Speed
Reducers
Overhung
Loads
6130 6135
6160DC 6165DC 6170DC 6175DC
6190DA 6195DA 6205DA
6180DB 6185DB 6190DB 6195DB
6205DB 6215DA 6225DA
6120 6125 612H
Cyclo® 6000 Series
Technical Information 5.15
1144_15-sec5_38638_Sect5 4/27/15 6:38 PM Page 5.16
CYCLO® 6000 Speed Reducers
Low Speed Shaft Specifications
Metric DIN Style “G”
Metric JIS
Dimensions aree in mm.
Dimensions aree in mm.
Size
606 X
607 X
608 X
Type
y
G
G
G
ØU
Tolerance
o
14 k6
+0.012
+0.001
V
25
S
M5
L1
16
Key Dimensions
imensions
5 x 5 x 20
19 k6
+0.015
+0.002
30
M6
16
6 x 6 x 25
22 k6
+0.015
+0.002
35
M6
16
6 x 6 x 30
609 X
G
28 k6
+0.015
+0.002
35
M8
20
8 x 7 x 32
610 X
G
28 k6
+0.015
+0.002
35
M8
20
8 x 7 x 32
32 k6
+0.018
+0.002
45
55
M8
20
10 x 8 x 50
M10
20
14 x 9 x 56
611 X
G
612 X
G
38 k6
+0.018
+0.002
613 X
G
50 h6
0
-0.016
70
0
-0.016
90
M8
20
10 x 8 x 37
Size
Type
y
ØU
Tolerance
Toler
V
S
L1
Key Dimensions
imensions
606 X
-
14 h6
+0 / -0.011
25
M5
16
5 x 5 x 20
607 X
-
18 h6
+0 / -0.011
30
M6
16
6 x 6 x 25
608 X
-
22 h6
+0 / -0.013
35
M6
16
6 x 6 x 30
609 X
-
28 h6
+0 / -0.013
35
M8
20
8 x 7 x 32
610 X
-
28 h6
+0 / -0.013
35
M8
20
8 x 7 x 32
611 X
-
32 h6
+0 / -0.016
45
M8
20
10 x 8 x 37
612 X
-
38 h6
+0 / -0.016
55
M8
20
10 x 8 x 50
613 X
-
50 h6
+0 / -0.016
70
M10
20
14 x 9 x 56
614 X
-
50 h6
+0 / -0.016
90
M10
20
14 x 9 x 80
616 X
-
60 h6
0
-0.019
90
M10
20
18 x 11 x 80
617 X
-
70 h6
0
-0.019
90
M12
24
20 x 12 x 80
80 h6
0
-0.019
110
M12
24
22 x 14 x 100
95 h6
0
-0.022
135
M20
34
25 x 14 x 125
100 h6
0
-0.022
165
M20
34
28 x 16 x 165
618 X
614 X
G
50 h6
M10
20
-
14 x 9 x 80
619 X
-
X = 0 or 5; single stage and multistage
620 X
621 X
-
110 h6
0
-0.022
165
M20
34
28 x 16 x 165
622 X
-
120 h6
0
-0.022
165
M20
34
32 x 18 x 165
130 h6
0
-0.025
200
M24
41
32 x 18 x 200
140 h6
0
-0.025
200
M24
41
36 x 20 x 240
160 h6
0
-0.025
240
M30
52
40 x 22 x 240
170 h6
0
-0.025
300
M30
52
40 x 22 x 300
180 h6
0
-0.025
330
M30
52
45 x 22 x 330
623 X
624 X
625 X
626 X
Low Speed
Specifications
Speed
Reducers
-
627 X
-
X = 0 or 5; single stage and multistage
Metric DIN Style “E”
Dimensions aree in mm.
Size
Type
ØU
Tolerance
o
V
S
L1
Key Dimensions
imensions
v1
v2
606 X
E
14 k6
+0.012
+0.001
30
M5
16
5 x 5 x 20
2.5
25
607 X
E
20 k6
+0.015
+0.002
40
M6
16
6 x 6 x 25
4
32
25 k6
+0.015
+0.002
50
M10
20
6 x 6 x 30
3.5
40
25 k6
+0.015
+0.002
50
M10
20
8 x 7 x 32
3.5
40
30 k6
+0.015
+0.002
60
M10
20
8 x 7 x 32
3.5
50
35 k6
+0.018
+0.002
70
M12
20
10 x 8 x 37
7
56
35 k6
+0.018
+0.002
70
M12
24
10 x 8 x 50
7
56
50 k6
+0.018
+0.002
100
M16
30
14 x 9 x 56
10
80
50 k6
+0.018
+0.002
100
M16
30
14 x 9 x 80
10
80
608 X
609 X
610 X
611 X
612 X
613 X
614 X
E
E
E
E
E
E
E
X = 0 or 5; single stage and multistage
5.16 Technical Information
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:38 PM Page 5.17
CYCLO® 6000 Speed Reducers
CYCLO® 6000 Speed Reducers
Slide Rail Dimensions
All dimensions are in inches
A
B
C
E
F
G
H
K
L
M
N
P
d
1
No.
Holes
C/2
Wt.
Lbs.
Pc.
Adjust[2]
Bolt (d x i)
Cyclo Mount[2]
Bolt (Sq.Hd.)
2
6090, 6095
6100, 6105
610H
10.63 17.32 16.14
.79
1.34
0.71
1.97
1.18
.79
—
2.28
.59
.55
2
—
5
M12 x 4.72
M10 x 1.57
6120, 6125
612H
11.42 20.08 18.50 1.18
1.97
0.98
2.76
1.57
1.18
—
3.15
.79
.71
2
—
10
M16 x 5.12
M12 x 1.97
6130, 6135
6140, 6145
614H
15.75 20.47 16.93 1.18
4.72
0.79
1.97
1.97
2.36
3.35
2.44
1.77
.55
4
—
14
M16 x 6.30
M16 x 2.56
6160, 6165
616H
20.47 25.20 21.65 1.18
5.12
0.98
2.05
2.17
2.76
3.74
2.76
1.77
.55
4
—
26
M16 x 7.87
M16 x 2.56
6170, 6175
21.65 29.53 23.62 1.77
7.09
1.18
2.56
3.15
3.74
5.12
3.35
2.95
.87
4
—
38
M24 x 9.45
M20 x 3.15
6180, 6185
25.59 33.46 27.56 1.77
7.09
1.18
3.15
3.15
3.74
5.12
3.94
2.95
.87
4
—
42
M24 x 11.81
M20 x 3.15
6190, 6195
25.59 33.46 27.56 1.77
9.06
1.57
3.54
3.94
5.12
6.69
4.33
2.95
1.02
4
—
84
M24 x 11.81
M24 x 3.94
6205
31.50 39.37 33.46 1.77
9.06
1.38
3.94
4.72
5.91
7.09
4.92
2.95
1.02
6
16.73 114
M24 x 12.99
M24 x 4.33
6215
31.50 39.37 33.46 1.77
9.06
1.38
3.94
4.72
5.91
7.09
4.92
2.95
1.02
6
16.73 114
M24 x 12.99
M24 x 4.53
6225, 6235
32.28 48.82 37.00 2.17 10.04 1.61
5.51
6.69 10.04 6.89
6.50
5.91
1.54
6
18.50 254
M36 x 16.34
M30 x 4.72
6245
44.09 60.63 48.82 2.17 10.04 1.61
6.89
6.69 10.04 6.89
7.87
5.91
1.54
6
24.41 346
M36 x 25.20
M36 x 5.31
6255
44.09 60.63 48.82 2.17 10.04 1.61
6.89
6.69 10.04 6.89
7.87
5.91
1.54
6
24.41 346
M36 x 25.20
M36 x 5.51
Notes: [1] Models 6090 through 6255 require two rails.
[2] Metric bolts furnished by factory; lengths shown in inches.
Cyclo® 6000 Series
Speed
Reducers
Slide Rail
Dimensions
Model[1]
Technical Information 5.17
1144_15-sec5_38638_Sect5 4/27/15 6:38 PM Page 5.18
CYCLO® 6000 Speed Reducers
Cyclo Food Industry Option Packages
Four food-grade packages are available for use in machinery where there is incidental food contact.
The following optional packages are available for Cyclo® frame sizes 6060 through 6165.
When ordering, choose the Special Specification Code (SSC) that meets your requirements to obtain the features
listed below.
Available Food Industry Option Packages
(Cyclo® frame sizes 6060-6165 only)
Modification
SHIELD360*
Ultra
SHIELD360*
X
Severe Duty Breather
X
FDA Epoxy Paint
FDA White Acrylic Top Coat
X
X
FDA Stainless Grey Epoxy Clear
FDA Grease/Oil
Food Grade
X
X
FKM AM & Chemical
X
Stainless Steel or Zinc Hardware
X
Stainless or Tesa Nameplate
X
Stainless Steel Output Shaft
X
X
Cyclo Food
Industry
Speed
Reducers
Stainless Steel Output Shaft: maximum torque ratings with standard solid shaft diameters are the same as
those listed in this catalog for standard models. Consult the factory when ordering smaller than standard
diameter, or if there will be overhung load.
Ultra SHIELD360™: available in a quill only.
5.18 Technical Information
Cyclo® 6000 Series
1144_15-sec5_38638_Sect5 4/27/15 6:38 PM Page 5.19
CYCLO® 6000 Speed Reducers
Warranty
Sumitomo warrants that its Cyclo® Speed Reducers and Cyclo® Gear Motors will deliver their continuous catalog
ratings and up to 500% intermittent SHOCK LOAD CAPACITY, provided they are properly installed, maintained
and operated within the limits of speed, torque or other load conditions under which they were sold. Sumitomo
further states that Cyclo® Speed Reducers and Cyclo® Gear Motors are warranted to be free of defects in material
or workmanship for a period of two years from the date of shipment. Sumitomo assumes no liability beyond
product repair or replacement under this limited warranty.
For construction purposes, be sure to obtain certified dimension sheets or drawings. Although we take every
precaution to include accurate data in our catalog, we cannot guarantee such accuracy. If performance guarantees are required, they should be obtained in writing from the factory. Full consideration will be given to such
requests when complete details are given of the proposed installation.
Warranty
Speed
Reducers
Cyclo® 6000 Series
Technical Information 5.19
1144_15-sec5_38638_Sect5 4/27/15 6:38 PM Page 5.20
CYCLO® 6000 Speed Reducers
This page intentionally left blank.
Warranty
Speed
Reducers
5.20 Technical Information
Cyclo® 6000 Series