How to Connect and Cut Single Color ÜBER LED Tape Light
How to calculate driver wattage
ÜBER 24VDC LED Tape Light comes in two types: Bright and Super Bright. ÜBER Bright is 1.44 watts/ft, while ÜBER Super
Bright is 4.32 watts/ft. To calculate the power of the driver required, simply multiply the watts/ft times the number of 1’
ÜBER pieces you are going to connect into a run.
Example: A 20’ run of ÜBER LED Bright requires 20 ft X 1.44 watts/ft = 29 watts minimum driver size.
Run Length Limits
The maximum length of a run of ÜBER Bright is 30’. The maximum length of a run of ÜBER Super Bright is 15’.
How to Connect ÜBER LED Tape to a Dimmable Driver
Hardwire Connector
Dimmable Driver
ÜBER LED Tape
Red
Red
(+24VDC)
black
Black
120V
white
Purple
(-24VDC)
Green =
Ground
How to separate ÜBER LED Tape
To disconnect and separate an individual foot length on a roll, carefully pull and then snip the red 3M away from the
back of the tape, then gently pull apart.
How to cut ÜBER LED Tape
Each foot of ÜBER LED Tape Light has 18 LEDs. The arrows below indicate where the tape can be cut (every 4 “).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ÜBER
4”
4”
SLV Lighting North America, Inc.
5731 Benjamin Center Drive • Tampa, FL 33634
Main Line: (813) 349–1900 • Fax Line: (813) 349–1907 • www.slvlighting.com
4”
17
18