FLUSH BOLTS & SOCKETS
These flush bolts are fitted top and bottom in the leading edge of the inactive leaf of a pair of metal doors. When both leaves are closed the flush bolts cannot be seen.
With the inactive leaf bolted and secure, the active leaf can be locked and both leaves become secure. The flush bolts on this page are manufactured from brass with a satin chrome finish and are suitable for use on fire rated doors. They are manufactured to ANSI standards (American National Standards Institute) which means fixing positions do not vary and they can be fitted to pre-prepped metal doors. Z003R/BULLET electro yellow passivated bullet head available separately.
Z003R ANSI STANDARD MANUAL FLUSH BOLT – 4 HOUR FIRE RATED
Material:
Body size: brass, satin chrome US26D finish. face plate 25.4mm wide x 171.4mm high.
Strike plate size: 23.8mm x 57.1mm.
Guide size: 25.4mm x 50.8mm.
Rod:
Throw:
ANSI prep:
Face:
305mm steel rod measured from centre of face to bolt end, retracted.
19mm bolt throw, 38mm adjustable bolt head.
fits ANSI A115 door and frame preparation.
flat face only for use on square edged doors.
Fixings:
Fire: supplied with rod, guide bracket, strike plate and 8 x No 8 x ¾ FH combo screws.
included in successful 4 hour fire test to BS476: Part 22: 1987.
Copy of WFRC Report No C118425 available upon request.
Box quantity: packed 2 bolts per box with rods and fittings. Outer cartons of 50.
Z006R STANDARD MANUAL FLUSH BOLT – WIDER BODY
Material:
Body size: brass, satin chrome US26D finish.
face plate 31.8mm wide x 171.4mm high. NB 6.4mm wider than Z003R ANSI prep.
Strike plate size: 23.8mm x 57.1mm.
Guide size: 25.4mm x 50.8mm.
Rod:
Throw:
Face:
Fixings:
305mm steel rod measured from centre of face to bolt end, retracted.
19mm bolt throw, 38mm adjustable bolt head.
flat face only for use on square edged doors.
supplied with rod, guide bracket, strike plate and 8 x No 8 x ¾ FH combo screws.
Box quantity: packed 2 bolts per box with rods and fittings. Outer cartons of 50.
Z012 THREADED ROD FOR USE ON TALL DOORS
Material:
Length: zinc plated mild steel allthread UNC ¼ x 20.
914mm. Other lengths available to order.
Z011 EASYCLEAN SOCKET
Easyclean socket to suit shoot size 13mm diameter maximum, includes fixing pack for wood or concrete. SAA finish.
(Box Qty 10, outer 100)
Z013 DUST EXCLUDING SOCKET
Plunger dust excluding socket to suit shoot size 13mm maximum, SCP finish.
(Box Qty 10, outer 50)
Z80 FLOOR DUST PROOF STRIKE
US design dust proof strike to suit shoot size 19mm maximum.
Supplied with mounting plate 38mm x 76mm. Prevents dirt, dust and debris from clogging floor strikes. Compatible with
Z003R, Z006R, Z004, Z005 and Z015. US32D satin stainless steel finish. Complete with screws and rawl plugs.
(Box Qty 1, outer 25)
Z81 THRESHOLD DUST PROOF STRIKE
US design dust proof strike to suit shoot size
19mm maximum. Supplied without mounting plate,
32mm diameter flange. Prevents dirt, dust and debris from clogging floor strikes. Compatible with Z003R,
Z006R, Z004, Z005 and Z015. US32D satin stainless steel finish. Complete with Tru Arc Ring to clamp underneath threshold.
(Box Qty 1, outer 25)
Z82 UNIVERSAL DUST PROOF STRIKE
US design universal dust proof strike to suit shoot size 19mm maximum. The plate is both adjustable by means of spanner wrench and removable, making it versatile for carpet, threshold, or concrete applications. With removable face plate for use with thresholds, and adjustable height for carpeted areas. Prevents dirt, dust and debris from clogging floor strikes. Compatible with Z003R,
Z006R, Z004, Z005 and Z015. US26D satin chrome plated finish standard, other finishes to special order. Barrel 22mm dia x 55mm depth. Face plate 35mm x 73mm. Universal screw package included for all installations.
(Box Qty 1, outer 80)
182 WWW.ZEROPLUS.CO.UK | TEL: +44 (0)1785 282910
All products usually available ex-stock except those marked with
*
Call for lead time