MF general purpose metal film leaded resistor features • • • • Semi-precision metal film resistors Meets requirements of MIL-R-22684 Suitable for automatic machine insertion Marking: Blue-gray body color with color-coded bands dimensions and construction L D l Trimming Line Ceramic Core d Marking Resistive Film End Cap Dimensions inches (mm) C (max.) D d Type L (ref.) MF1/4 .248 (6.3) .280 (7.1) MF1/2 .374 (9.5) .437 (11.1) l .091±.012 .024±.002 (2.3±0.3) (0.6±0.05) 1.18±.118 .138±.016 .031±.002 (30.0±3.0) (3.5±0.4) (0.8±0.05) Lead Wire Insulation Coating C leaded resistors ordering information Old Part # New Part # ML07, ML20 R20 J T52 Type Resistance Tolerance Packaging MF 1/4 L T52 R Taping and Forming Packaging 1/4: T26, T52, VT, VTP, VTE, M Forming 1/2: T52, M Forming A: Ammo R: Reel Type Power Rating 1/4: 250mW 1/2: 500mW For further information on packaging, please refer to Appendix C. L T.C.R. L: 200 ppm/C° Termination Material L: SnPb C: SnCu R20 Nominal Resistance 2 significant figures + 1 multiplier “R” indicates decimal on value <10Ω J Tolerance G: ±2% J: ±5% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 178 KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com MF general purpose metal film leaded resistor applications and ratings Part Designation Power Rating @ 70°C Minimum Dielectric Withstanding Voltage MF1/4 250mW 500V MF1/2 500mW 700V T.C.R. (ppm/°C) Max. 200 Resistance Range E-24 (G±2%, J±5%) Absolute Maximum Working Voltage Absolute Maximum Overload Voltage 0.20Ω - 33MΩ 250V 500V 0.33Ω - 51MΩ 350V 700V Operating Temperature Range -55°C to +155°C environmental applications Derating Curve Surface Temperature Rise 80 75 Temperature Rise (°C) 90 % Rated Power 100 60 40 20 0 -60 -40 -20 -55 0 20 80 100 120 140 160 70 155 Ambient Temperature (°C) 40 60 MF1/4, MF1/2 60 45 30 15 0 0 25 50 75 100 % Rated Power Performance Characteristics Parameter Requirement ±200ppm/°C ±(0.30% + 0.05Ω) ±(0.20% + 0.05Ω) ±1.5% <10 -5 %/1000 hours ±(0.50% + 0.05Ω) leaded resistors Temperature Coefficient Short Time Overload Resistance to Solder Heat Moisture Resistance Load Life Failure Rate Temperature Cycling Vibration Shock Terminal Strength Current Noise Voltage Coefficient Low Temperature Operation ±(0.20% + 0.05Ω) 5 # Minimum <1.0µv/v/decade <20ppm/v ±(0.30% + 0.05Ω) Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. KOA Speer Electronics, Inc. • Bolivar Drive • P.O. Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 179