TRANSFORMER BOX
TRANSFORMER BOX FOR SLIM RECESSED LIGHT
MODEL: TRS60--------PACKAGE CONTENTS
SPECIFICATIONS
FEATURES
MODEL: TRS60--------DIMMABLE TRANSFORMER BOX (CLASS2)
POWER: 60W
PRIMARY INPUT: 120V AC 60HZ 0.5A
SECONDARY OUTPUT: 11.5V AC PER 60VA CIRCUIT
DIMENSIONS: 1.5" X 1.5" X 6.45"
A
B
C
E
D
F
MOUNTING SURFACE
- Female connectors included
- To be used with LUMINIZ SLIMLITE 4"/6"
- Connects up to 4 LUMINIZ SLIM LITE 4" or 3 LUMINIZ
SLIM LITE 6" MAX
- Suitable for damp location
- For indoor use only
- Maximum 60W per circuit
MULTI LINK
DAMP
LOCATION
LOW
VOLTAGE
PATENT
PENDING
12V
DIMMABLE
60W
MAX
60W
SAFETY PRECAUTIONS
#
CAT
SPECIFICATION
A
Screw
M4 X 0.23"(6mm)
B
Cover
2" x 1.5" x 0.03" (51 x 38 x 1mm)
C
Screw
ST2.5 x 0.47"(12mm)
D
Connector
18AWG Female
E
Input Wire
18AWG
F
Transformer
1.5" x 1.5" x 6.45"
IMPORTANT SAFETY INSTRUCTIONS:
READ ALL INSTRUCTIONS BEFORE INSTALLATION AND RETAIN FOR FUTURE REFERENCE
DANGER: RISK OF SHOCK. TO AVOID POSSIBLE ELECTRICAL SHOCK, BE SURE
THAT POWER SUPPLY IS TURNED OFF AT FUSE BOX/PANEL OR CIRCUIT
BREAKER BEFORE INSTALLATION OR SERVICING FIXTURE.
RISK OF FIRE OR ELECTRIC SHOCK: SLIM LITES OPERATING AT 12V AC.
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, CUT WIRES OFF CLEANLY.
DO NOT STRIP WIRES. DO NOT INSTALL THIS SYSTEM IN WET LOCATIONS.
SUPPLY CONDUCTORS (POWER WIRES) CONNECTING THE FIXTURE MUST BE
RATED 90˚C MINIMUM. IF UNCERTAIN, PLEASE CONSULT LICENSED
ELECTRICIAN.
TO REDUCE RISK OF FIRE AND/OR OVERHEATING, MAKE SURE ALL
CONNECTIONS ARE TIGHT. TURN OFF ELECTRICAL POWER BEFORE MODIFYING
THE LIGHTING SYSTEM IN ANY WAY.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, OR INJURY TO
PERSONS:
A) USE ONLY INSULATED STAPLES OR PLASTIC TIES TO SECURE CORDS
B) ROUTE AND SECURE CORDS TO AVOID PINCHING OR DAMAGING CORDS
C) IC RATED – SUITABLE FOR INSULATED CEILINGS OR SOFFITS
D) THE NATIONAL ELECTRICAL CODE (NEC) DOES NOT PERMIT CORDS TO BE
CONCEALED WHERE DAMAGE TO INSULATION MAY GO UNNOTICED. TO
PREVENT FIRE, DO NOT RUN CORD BEHIND WALLS, CEILINGS, SOFFITS OR
CABINETS WHERE IT MAY NOT BE ACCESSIBLE FOR EXAMINATION. CORDS
SHOULD BE VISUALLY EXAMINED PERIODICALLY AND IMMEDIATELY REPLACED
WHEN ANY DAMAGE IS NOTED.
WARNING: TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE
WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS. DO NOT ALTER
OR MAKE ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL
COMPONENTS DURING KIT INSTALLATION.
YOU MAY USE THIS TRANSFORMER BOX(TRS60---------) WITH OTHER
12V PRODUCTS. HOWEVER, LUMINIZ IS NOT RESPONSIBLE FOR
ANY DIMMING, FLICKERING ISSUES. PLEASE MAKE SURE YOUR
DIMMER AND YOUR PRODUCT IS COMPATIBLE BEFORE USAGE.
FOR YOUR SAFETY READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING
INSTALLATION.
WARNING: RISK OF FIRE OR ELECTRIC SHOCK. INSTALLATION OF SLIM LITE KIT
REQUIRES KNOWLEDGE OF LUMINAIRE ELECTRICAL SYSTEMS. TO BE
INSTALLED BY LICENSED ELECTRICIANS ONLY.
INSTALLATION INSTRUCTION (WITH LUMINIZ SLIM LITE 4"/6" - DWS4 /DWS6)
Fig. 1
Fig. 2
Fig. 3
CUT HOLE SIZE
SLIM LITE 4" /SLIM LITE 6"
Ø 105mm(4.13") / Ø 160mm(6.3")
Fig. 4
TWIST & LOCK
L
N
L
GND
N
GND
TRANSFORMER BOX
TRS60--------MOUNTING SURFACE
1) TURN OFF ALL ELECTRICAL POWER BEFORE INSTALLING.
CONNECT 120V AC CABLE TO LUMINIZ TRANSFORMER BOX
BY USING THE QUICK CONNECTORS.
ENERGY STAR
PENDING
2) CONNECT SLIM LITE TO LUMINIZ
TRANSFORMER BOX.
3) PULL UP THE CLIPS TO ENSURE THE SLIM LITE
FITS SNUG TO THE CUT HOLE.
4) SLIM LITE INSTALLATION COMPLETE.
TURN ON POWER.
DESIGNED AND IMPORTED BY LUMINIZ INC. / 27 LEADING RD, ETOBICOKE, ON, M9V 4B7, CANADA / 416.494.6616 /1.855.LUMINIZ / WWW.LUMINIZ.COM
TRANSFORMER BOX
TRANSFORMER BOX FOR SLIM RECESSED LIGHT
MODEL: TRS60--------CONNECTION VARIATION
1) CONNECTION LAYOUT FOR 1 SLIM LITE (4 INCH/6 INCH)
MULTILINK: Slim Lite (Patent Pending) allows for connecting multiple fixtures to the same transformers.
DWS6
DWS4
TRS60
S
CONNECTION CONSIST OF:
01 X SLIM LITE 4 INCH/6 INCH
01 X TRANSFORMER BOX :TRS60---------
STANDARD DIMMING:
Dimming in this method is from 10% - 100%, when using various lengths of wire from each fixture to the
same transformer.
OPTIMAL DIMMING:
Perfect dimming in this method from 0% - 100% when all fixtures are connected with the same length of
wire to the same transformer or adaptor. Fixtures maybe installed at various lengths or distances. However,
recommended that the wire lengths be equal (allowing for slacking) due to drop voltage.
2) CONNECTION LAYOUT FOR 2 SLIM LITE (4 INCH/6 INCH)
TRS60
TRS60
ADS12
ADS12
WRS13
DWS6
DWS4
CONNECTION CONSIST OF:
02 X SLIM LITE 4 INCH / 6 INCH
01 X TRANSFORMER BOX :TRS60--------01 X ADAPTER 1-2 : ADS12--------01 X WIRE 2: WRS13---------
DWS6
DWS4
CONNECTION CONSIST OF:
02 X SLIM LITE 4 INCH / 6 INCH
01 X TRANSFORMER BOX :TRS60--------01 X ADAPTER 1-2 : ADS12--------02 X WIRE 2: WRS13---------
WRS13
WRS13
DWS6
DWS4
DWS6
DWS4
3) CONNECTION LAYOUT FOR 3 SLIM LITE (4 INCH/6 INCH)
TRS60
TRS60
ADS12
ADS13
DWS6
DWS4
DWS6
DWS4
WRS13
WRS13
WRS16
CONNECTION CONSIST OF:
03 X SLIM LITE 4 INCH / 6 INCH
01 X TRANSFORMER BOX :TRS60--------01 X ADAPTER 1-2 : ADS12--------01 X WIRE 1: WRS16---------
DWS6
DWS4
CONNECTION CONSIST OF:
03 X SLIM LITE 4 INCH / 6 INCH
01 X TRANSFORMER BOX :TRS60--------01 X ADAPTER 1-3 : ADS13--------03 X WIRE 2: WRS13---------
DWS6
DWS4
WRS13
DWS6
DWS4
DWS6
DWS4
4) CONNECTION LAYOUT FOR 4 SLIM LITE (4 INCH ONLY)
TRS60
TRS60
ADS12
WRS16
CONNECTION CONSIST OF:
04 X SLIM LITE 4 INCH
01 X TRANSFORMER BOX :TRS60--------01 X ADAPTER 1-2 : ADS12--------02 X WIRE 1: WRS16---------
ENERGY STAR
PENDING
WRS16
DWS4
DWS4
DWS4
DWS4
CONNECTION CONSIST OF:
04 X SLIM LITE 4 INCH
01 X TRANSFORMER BOX :TRS60--------01 X ADAPTER 1-4 : ADS14--------04 X WIRE 2: WRS13---------
ADS14
WRS13
WRS13
WRS13
WRS13
DWS4
DWS4
DWS4
DWS4
DESIGNED AND IMPORTED BY LUMINIZ INC. / 27 LEADING RD, ETOBICOKE, ON, M9V 4B7, CANADA / 416.494.6616 /1.855.LUMINIZ / WWW.LUMINIZ.COM