2285-WL_Cyl_prod.qxd
2/2/05
3:57 PM
Page 1
2285-WL_Cyl_prod.qxd
2/2/05
3:58 PM
Page 2
pg. 7 & 13
5420 GRANGER
5250-VHB CISCO
pg. 3 & 14
pg. 8 & 13
5460 LAYTON
5410 HALEN
5250 CISCO
5250-VB CISCO
pg. 4 & 12
pg. 9 & 14
5450 SHARIS
5400 BADE
5451 LESLEY
5250 CISCO
pg. 5 & 12
pg. 10 & 14
5440 DELANO
3708 NAVARRO
5441 HEWITT
3703 TESLA
pg. 6 & 13
pg. 11 & 14
5430 FINN
3707 DARNEL
5250-HB CISCO
3704 DOMINIQUE
2285-WL_Cyl_prod.qxd
2/2/05
3:58 PM
Page 3
IMB (Surface Mount) canopy detail
3 1/2"
5460
LAYTON
Ø 10 1/8"
42"
29 1/2"
Ø 12"
SUBMITTAL SPECIFICATIONS:
5460 CATALOG
NUMBER
-
LAMPING
VOLTAGE
LENS
OPTION
FINISH
BALLAST
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
5460-12
FF/H75F/MH70-
(2) FT39W/2G11
(2) FT39W/2G11 and (1) 75W Par 38 Halogen Downlight
(2) FT39W/2G11 and (1) 70W Par 38 Metal Halide Downlight
Voltage:
120V or 277V
(when using Halogen Downlight 120V only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for
an example or visit our
website for more
information.
OA-
Extruded Opal Acrylic (Etched) Inner Lens with Cast
Clear Outer Lens (Shown)
White Vein Hand Painted Faux Alabaster Inner Lens with Cast
Clear Outer Lens
Antique (Beige) Hand Painted Faux Alabaster Inner Lens with Cast
Clear Outer Lens
Gray Vein Hand Painted Faux Alabaster Inner Lens with Cast
Clear Outer Lens
Beige Vein Hand Painted Faux Alabaster Inner Lens with Cast
Clear Outer Lens
Lamping:
FAH4FAH5FAH6FAH7-
Standard
BALBB-
Brushed Aluminum (Shown)
Brushed Brass
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Metal Halide
IMBRMB-
Integral Electronic (See Surface Mount Canopy Detail)
Remote Mount Magnetic
Special:
STDMOD-
Standard
Modified Standard
Weight:
FF/HF/MH-
16 lbs.
20 lbs.
25 lbs.
Finishes:
Ballast:
Fixture Shown with Halogen
Downlight Lamp Option
5250 / CISCO
COMPLIMENTARY WALL BRACKET - SEE PAGE 14 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
3
2285-WL_Cyl_prod.qxd
5450
SHARIS
2/2/05
3:58 PM
Page 4
IMB (Surface Mount) canopy detail
4 1/4"
Ø 9"
46"
42"
28 1/4"
28 1/4"
12 1/8"
14 1/8"
SUBMITTAL SPECIFICATIONS:
5450 -
-
CATALOG
NUMBER
LAMPING
VOLTAGE
-
-
LENS
OPTION
FINISH
BALLAST
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
5450-10, 5450-12
Lamping:
5450-10
FF/H100F/MH100-
(4) FT40W/2G11
(4) FT40W/2G11 and (1) 100W Par 38 Halogen Downlight
(4) FT40W/2G11 and (1) 100W Par 38 Metal Halide Downlight
5450-12
FF/H250F/MH100-
(4) FT50W/2G11
(4) FT50W/2G11 and (1) 250W Par 38 Halogen Downlight
(4) FT50W/2G11 and (1) 100W Par 38 Metal Halide Downlight
Voltage:
120V or 277V
(when using Halogen Downlight 120V only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for
an example or visit our
website for more
information.
OAWLGFAH4FAH5FAH6FAH7-
Opal Acrylic – Etched
White Laminated Glass (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
BNBB-
Brushed Nickel (Shown)
Brushed Brass
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Metal Halide
IMBRMB-
Integral Electronic (See Surface Mount Canopy Detail)
Remote Mount Magnetic
Fluorescent**
DIM-
Dimming (Lutron ECO 10)
DIM/IMB-
Finishes:
Ballast:
Fluorescent/Metal Halide**
DIM/RMB-
Dimming (Lutron ECO 10) / Integral Electronic
(See Surface Mount Canopy Detail)
Dimming (Lutron ECO 10) / Remote Mount Electronic
Special:
STDMOD-
Standard
Modified Standard
Weight:
FF/HF/MH-
10- 40 lbs.
10- 45 lbs.
10- 55 lbs.
12- 55 lbs.
12- 60 lbs.
12- 70 lbs.
NOTE: For fixtures over
50 lbs. additional mounting
support required.
** Dimming option for Fluorescent lamps only; Lutron ECO-10 ballast's offer 100% to 10% dimming.
ECO-10 ballast's are fully compatible with Lutrons complete line of 3-wire fluorescent controls.
5451 / LESLEY
4
COMPLIMENTARY WALL BRACKET - SEE PAGE 12 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
2285-WL_Cyl_prod.qxd
2/2/05
3:58 PM
Page 5
5440
DELANO
46"
42"
30 3/4"
25"
Ø 13 5/8"
Ø 17"
SUBMITTAL SPECIFICATIONS:
5440 CATALOG
NUMBER
-
LAMPING
VOLTAGE
-
-
LENS
OPTION
FINISH
BALLAST
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
5440-10, 5440-12
Lamping:
5440-10*
FF/H75FF/H100-
(2) FT39W/2G11
(2) FT39W/2G11 and (1) 75W Par 38 Halogen Downlight
(4) FT40W/2G11
(4) FT40W/2G11 and (1) 100W Par 38 Halogen Downlight
Voltage:
120V or 277V
(when using Halogen Downlight 120V only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
PBPN-
Polished Brass
Polished Nickel (Shown)
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Fluorescent
5440-12
Finishes:
DIM-
Dimming (Lutron ECO 10)
Special:
STDMOD-
Standard
Modified Standard
Weight:
FF/H-
10- 15 lbs.
10- 20 lbs.
Ballast:
12- 25 lbs.
12- 30 lbs.
* Dimming NOT Available for 5440-10; Lutron ECO-10 ballast's offer 100% to 10% dimming.
ECO-10 ballast's are fully compatible with Lutrons complete line of 3-wire fluorescent controls.
5441 / HEWITT
COMPLIMENTARY WALL BRACKET - SEE PAGE 12 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
5
2285-WL_Cyl_prod.qxd
2/2/05
3:58 PM
Page 6
IMB (Surface Mount) canopy detail
5430
FINN
3 1/2"
Ø 10 1/8"
46"
42"
36"
29"
28"
23 1/2"
Ø 11 1/2"
Ø 16 3/4"
Ø 14 3/4"
SUBMITTAL SPECIFICATIONS:
5430 -
-
CATALOG
NUMBER
LAMPING
VOLTAGE
-
-
LENS
OPTION
FINISH
BALLAST
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
5430-8, 5430-10, 5430-12
Lamping:
5430-8*
FF/H75F/MH70-
(2) FT39W/2G11
(2) FT39W/2G11 and (1) 75W Par 38 Halogen Downlight
(2) FT39W/2G11 and (1) 70W Par 38 Metal Halide Downlight
5430-10
FF/H100F/MH100-
(4) FT40W/2G11
(4) FT40W/2G11 and (1) 100W Par 38 Halogen Downlight
(4) FT40W/2G11 and (1) 100W Par 38 Metal Halide Downlight
5430-12
FF/H250F/MH100-
(4) FT50W/2G11
(4) FT50W/2G11 and (1) 250W Par 38 Halogen Downlight
(4) FT50W/2G11 and (1) 100W Par 38 Metal Halide Downlight
Voltage:
120V or 277V
(when using Halogen Downlight 120V only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
PBPN-
Polished Brass (Shown)
Polished Nickel
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Metal Halide
IMBRMB-
Integral Electronic (See Surface Mount Canopy Detail)
Remote Mount Magnetic
Fluorescent**
DIM-
Dimming (Lutron ECO 10)
DIM/IMB-
Finishes:
Ballast:
DIM/RMB-
Dimming (Lutron ECO 10) / Integral Electronic
(See Surface Mount Canopy Detail)
Dimming (Lutron ECO 10) / Remote Mount Electronic
Special:
STDMOD-
Standard
Modified Standard
Weight:
FF/HF/MH-
8- 15 lbs.
8- 17 lbs.
8- 22 lbs.
Fluorescent/Metal Halide**
10- 22 lbs.
10- 25 lbs.
10- 32 lbs.
12- 32 lbs.
12- 35 lbs.
12- 45 lbs.
* Dimming NOT Available for 5430-8 ** Dimming option for Fluorescent lamps only; Lutron ECO-10 ballast's
offer 100% to 10% dimming. ECO-10 ballast's are fully compatible with Lutrons complete line of 3-wire
fluorescent controls.
5250-HB / CISCO
6
COMPLIMENTARY WALL BRACKET - SEE PAGE 13 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
2285-WL_Cyl_prod.qxd
2/2/05
3:59 PM
Page 7
IMB (Surface Mount) canopy detail
3 1/2"
5420
GRANGER
Ø 10 1/8"
46"
42"
36"
29 1/4"
28 1/2"
23 1/2"
Ø 11 1/2"
Ø 9 1/2"
Ø 13 5/8"
SUBMITTAL SPECIFICATIONS:
5420 CATALOG
NUMBER
-
-
-
LAMPING
VOLTAGE
-
-
LENS
OPTION
FINISH
BALLAST
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
5420-8, 5420-10, 5420-12
Lamping:
5420-8*
FF/H75F/MH70-
(2) FT39W/2G11
(2) FT39W/2G11 and (1) 75W Par 38 Halogen Downlight
(2) FT39W/2G11 and (1) 70W Par 38 Metal Halide Downlight
5420-10
FF/H100F/MH100-
(4) FT40W/2G11
(4) FT40W/2G11 and (1) 100W Par 38 Halogen Downlight
(4) FT40W/2G11 and (1) 100W Par 38 Metal Halide Downlight
5420-12
FF/H250F/MH100-
(4) FT50W/2G11
(4) FT50W/2G11 and (1) 250W Par 38 Halogen Downlight
(4) FT50W/2G11 and (1) 100W Par 38 Metal Halide Downlight
Voltage:
120V or 277V
(when using Halogen Downlight 120V only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
BALBBLBP-
Brushed Aluminum with Brushed Stainless Steel Perf
Brushed Brass with Brushed Brass Perf
Light Bronze Paint with Brushed Texture and Brushed
Stainless Steel Perf (Shown)
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Metal Halide
IMBRMB-
Integral Electronic (See Surface Mount Canopy Detail)
Remote Mount Magnetic
Fluorescent**
DIM-
Dimming (Lutron ECO 10)
DIM/IMB-
Finishes:
Ballast:
DIM/RMB-
Dimming (Lutron ECO 10) / Integral Electronic
(See Surface Mount Canopy Detail)
Dimming (Lutron ECO 10) / Remote Mount Electronic
Special:
STDMOD-
Standard
Modified Standard
Weight:
FF/HF/MH-
8- 15 lbs.
8- 17 lbs.
8- 25 lbs.
Fluorescent/Metal Halide**
* Dimming NOT Available for 5420-8
10- 17 lbs.
10- 20 lbs.
10- 27 lbs.
12- 22 lbs.
12- 25 lbs.
12- 35 lbs.
** Dimming option for Fluorescent lamps only.
Lutron ECO-10 ballast's offer 100% to 10% dimming.
ECO-10 ballast's are fully compatible with Lutrons
complete line of 3-wire fluorescent controls.
5250-VHB / CISCO
COMPLIMENTARY WALL BRACKET - SEE PAGE 13 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
7
2285-WL_Cyl_prod.qxd
2/2/05
3:59 PM
Page 8
IMB (Surface Mount) canopy detail
5410
HALEN
3 1/2"
Ø 10 1/8"
46 1/2"
42 3/4"
36 1/4"
30"
29"
23 1/2"
Ø 9"
Ø 13 1/2"
Ø 11"
SUBMITTAL SPECIFICATIONS:
5410 -
-
CATALOG
NUMBER
LAMPING
VOLTAGE
LENS
OPTION
FINISH
BALLAST
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
5410-8, 5410-10, 5410-12
Lamping:
5410-8*
FF/H75F/MH70-
(2) FT39W/2G11
(2) FT39W/2G11 and (1) 75W Par 38 Halogen Downlight
(2) FT39W/2G11 and (1) 70W Par 38 Metal Halide Downlight
5410-10
FF/H100F/MH100-
(4) FT40W/2G11
(4) FT40W/2G11 and (1) 100W Par 38 Halogen Downlight
(4) FT40W/2G11 and (1) 100W Par 38 Metal Halide Downlight
5410-12
FF/H250F/MH100-
(4) FT50W/2G11
(4) FT50W/2G11 and (1) 250W Par 38 Halogen Downlight
(4) FT50W/2G11 and (1) 100W Par 38 Metal Halide Downlight
Voltage:
120V or 277V
(when using Halogen Downlight 120V only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
BALBBLBP-
Brushed Aluminum (Shown)
Brushed Brass
Light Bronze Paint with Brushed Texture
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Metal Halide
IMBRMB-
Integral Electronic (See Surface Mount Canopy Detail)
Remote Mount Magnetic
Fluorescent**
DIM-
Dimming (Lutron ECO 10)
DIM/IMB-
Finishes:
Ballast:
DIM/RMB-
Dimming (Lutron ECO 10) / Integral Electronic
(See Surface Mount Canopy Detail)
Dimming (Lutron ECO 10) / Remote Mount Electronic
Special:
STDMOD-
Standard
Modified Standard
Weight:
FF/HF/MH-
8- 15 lbs.
8- 18 lbs.
8- 28 lbs.
Fluorescent/Metal Halide**
10- 22 lbs.
10- 25 lbs.
10- 35 lbs.
12- 30 lbs.
12- 35 lbs.
12- 45 lbs.
* Dimming NOT Available for 5410-8 ** Dimming option for Fluorescent lamps only; Lutron ECO-10 ballast's
offer 100% to 10% dimming. ECO-10 ballast's are fully compatible with Lutrons complete line of 3-wire
fluorescent controls.
5250-VB / CISCO
8
COMPLIMENTARY WALL BRACKET - SEE PAGE 13 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
2285-WL_Cyl_prod.qxd
2/2/05
3:59 PM
Page 9
IMB (Surface Mount) canopy detail
3 1/2"
5400
BADE
Ø 10 1/8"
46"
42"
36"
29"
29"
24"
Ø 10 3/8"
Ø 8 3/8"
Ø 12 3/8"
SUBMITTAL SPECIFICATIONS:
5400 CATALOG
NUMBER
-
-
-
LAMPING
VOLTAGE
LENS
OPTION
FINISH
BALLAST
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
5400-8, 5400-10, 5400-12
Lamping:
5400-8*
FF/H75F/MH70-
(2) FT39W/2G11
(2) FT39W/2G11 and (1) 75W Par 38 Halogen Downlight
(2) FT39W/2G11 and (1) 70W Par 38 Metal Halide Downlight
5400-10
FF/H100F/MH100-
(4) FT40W/2G11
(4) FT40W/2G11 and (1) 100W Par 38 Halogen Downlight
(4) FT40W/2G11 and (1) 100W Par 38 Metal Halide Downlight
5400-12
FF/H250F/MH100-
(4) FT50W/2G11
(4) FT50W/2G11 and (1) 250W Par 38 Halogen Downlight
(4) FT50W/2G11 and (1) 100W Par 38 Metal Halide Downlight
Voltage:
120V or 277V
(when using Halogen Downlight 120V only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
PBPNSGW-
Polished Brass (Shown)
Polished Nickel
Semi Gloss White
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Metal Halide
IMBRMB-
Integral Electronic (See Surface Mount Canopy Detail)
Remote Mount Magnetic
Fluorescent**
DIM-
Dimming (Lutron ECO 10)
DIM/IMB-
Finishes:
Ballast:
DIM/RMB-
Dimming (Lutron ECO 10) / Integral Electronic
(See Surface Mount Canopy Detail)
Dimming (Lutron ECO 10) / Remote Mount Electronic
Special:
STDMOD-
Standard
Modified Standard
Weight:
FF/HF/MH-
8- 10 lbs.
8- 12 lbs.
8- 20 lbs.
Fluorescent/Metal Halide**
* Dimming NOT Available for 5400-8
10- 15 lbs.
10- 18 lbs.
10- 25 lbs.
12- 25 lbs.
12- 28 lbs.
12- 35 lbs.
** Dimming option for Fluorescent lamps only.
Lutron ECO-10 ballast's offer 100% to 10% dimming.
ECO-10 ballast's are fully compatible with Lutrons
complete line of 3-wire fluorescent controls.
5250 / CISCO
COMPLIMENTARY WALL BRACKET - SEE PAGE 14 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
9
2285-WL_Cyl_prod.qxd
2/2/05
3:59 PM
Page 10
3708
NAVARRO
46"
31 5/8"
Ø 17 1/2"
SUBMITTAL SPECIFICATIONS:
3708
F
-
CATALOG
NUMBER
-
LAMPING
VOLTAGE
LENS
OPTION
X
FINISH
BALLAST
PRODUCT SPECIFICATIONS:
Catalog#:
10
(2) FT39W/2G11
F-
Voltage:
120V or 277V
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
BALLBP-
Brushed Aluminum
Light Bronze Paint with Brushed Texture (Shown)
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
F-
35 lbs.
Finishes:
3703 / TESLA
3708
Lamping:
COMPLIMENTARY WALL BRACKET - SEE PAGE 14 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
SPECIAL
2285-WL_Cyl_prod.qxd
2/2/05
3:59 PM
Page 11
IMB (Surface Mount) canopy detail
3 1/2"
3707
DARNEL
Ø 10 1/8"
46 3/4"
43"
36 1/2"
29 1/4"
29 1/4"
24 1/4"
Ø 11 1/2"
Ø 9 1/2"
Ø 13 1/2"
SUBMITTAL SPECIFICATIONS:
-
3707CATALOG
NUMBER
LAMPING
VOLTAGE
LENS
OPTION
X
FINISH
-
BALLAST
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
3707-8, 3707-10, 3707-12
Lamping:
3707-8*
FF/H75F/MH70-
(2) FT39W/2G11
(2) FT39W/2G11 and (1) 75W Par 38 Halogen Downlight
(2) FT39W/2G11 and (1) 70W Par 38 Metal Halide Downlight
3707-10
FF/H100F/MH100-
(4) FT40W/2G11
(4) FT40W/2G11 and (1) 100W Par 38 Halogen Downlight
(4) FT40W/2G11 and (1) 100W Par 38 Metal Halide Downlight
3707-12
FF/H250F/MH100-
(4) FT50W/2G11
(4) FT50W/2G11 and (1) 250W Par 38 Halogen Downlight
(4) FT50W/2G11 and (1) 100W Par 38 Metal Halide Downlight
Voltage:
120V or 277V
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
BAL-
Brushed Aluminum with Black Tape Details and Polished
Aluminum Knobs
Light Bronze Paint with Brushed Texture, Black Tape Details and
Light Bronze Painted Knobs
Cherry Wood Finish and Brushed Aluminum Details with Polished
Aluminum Knobs (Shown)
Finishes:
Standard
LBPWD-
Ballast:
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Metal Halide
IMBRMB-
Integral Electronic (See Surface Mount Canopy Detail)
Remote Mount Magnetic
Fluorescent**
DIM-
Dimming (Lutron ECO 10)
DIM/IMB-
Fluorescent/Metal Halide**
DIM/RMB-
Dimming (Lutron ECO 10) / Integral Electronic
(See Surface Mount Canopy Detail)
Dimming (Lutron ECO 10) / Remote Mount Electronic
Special:
STDMOD-
Standard
Modified Standard
Weight:
FF/HF/MH-
8- 28 lbs.
8- 31 lbs.
8- 37 lbs.
10- 30 lbs.
10- 33 lbs.
10- 39 lbs.
12- 35 lbs.
12- 38 lbs.
12- 45 lbs.
* Dimming NOT Available for 3707-8
** Dimming option for Fluorescent lamps only;
Lutron ECO-10 ballast's offer 100% to 10% dimming.
ECO-10 ballast's are fully compatible with Lutrons
complete line of 3-wire fluorescent controls.
3704 / DOMINIQUE COMPLIMENTARY WALL BRACKET - SEE PAGE 14 FOR BRACKET SPECIFICATIONS
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528
www.winonalighting.com
11
2285-WL_Cyl_prod.qxd
2/2/05
3:59 PM
Page 12
Two new wall mount designs and six new configurations of our existing wall mounts have
been selected to compliment the pendants in the Cylinders Series. Like the pendants, the
ability to be modified is built right in.
SUBMITTAL SPECIFICATIONS:
5451
5451
LESLEY
F
-
CATALOG
NUMBER
3 3/4"
-
LAMPING
VOLTAGE
LENS
OPTION
FINISH
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
10"
5451
(2) CFT13W/2GX7
Lamping:
F-
Voltage:
120V or 277V
Lens Option:
OAWLGFAH4FAH5FAH6FAH7-
Opal Acrylic – Etched
White Laminated Glass (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
BNBB-
Brushed Nickel (Shown)
Brushed Brass
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
F-
8 lbs.
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
Finishes:
14"
SUBMITTAL SPECIFICATIONS:
5441- U
5441
HEWITT
F
-
CATALOG
NUMBER
-
LAMPING
VOLTAGE
4"
LENS
OPTION
FINISH
SPECIAL
(OR)*
5441- D
F
-
CATALOG
NUMBER
-
LAMPING
VOLTAGE
LENS
OPTION
FINISH
SPECIAL
PRODUCT SPECIFICATIONS:
Catalog#:
10 5/8"
(1) CFTR26W/2GX24q-3
F-
Voltage:
120V or 277V
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
PNPB-
Polished Nickel
Polished Brass (Shown)
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
F-
5 lbs.
Finishes:
5441-U
5441-U, 5441-D
Lamping:
7"
* Please make sure to specify UP (OR) DOWN mounting condition when submitting catalog number.
NOTE:
THIS FIXTURE CAN
ALSO BE MOUNTED
WITH THE NARROW
END FACING DOWN.
12
5441-D
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528 • www.winonalighting.com
2285-WL_Cyl_prod.qxd
2/2/05
3:59 PM
Page 13
SUBMITTAL SPECIFICATIONS:
5250 - VHB -
3 1/2"
-
CATALOG
NUMBER
LAMPING
VOLTAGE
LENS
OPTION
FINISH
PRODUCT SPECIFICATIONS:
Catalog#:
4"
5250 - VHB
IFF27 -
(2) 60W T-10/Med.
(2) CFT13W/2GX7
(1) FT27W/2G11
Voltage:
120V or 277V
(Incandescent 120 Volt only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
PBPCBALLBP-
Polished Brass
Polished Chrome
Brushed Aluminum (Shown)
Light Bronze Paint with Brushed Texture
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
I- / F- / F27-
5 lbs.
Lamping:
Finishes:
5250 - HB -
3 1/2"
-
CATALOG
NUMBER
LAMPING
VOLTAGE
LENS
OPTION
FINISH
4"
5250 - HB
IFF27 -
(2) 60W T-10/Med.
(2) CFT13W/2GX7
(1) FT27W/2G11
Voltage:
120V or 277V
(Incandescent 120 Volt only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster (Shown)
Beige Vein Hand Painted Faux Alabaster
Standard
PBPCBALLBP-
Polished Brass
Polished Chrome (Shown)
Brushed Aluminum
Light Bronze Paint with Brushed Texture
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
I- / F- / F27-
5 lbs.
Lamping:
5250 - VB LAMPING
VOLTAGE
LENS
OPTION
FINISH
5250-VB
CISCO
SPECIAL
PRODUCT SPECIFICATIONS:
4"
5250 - VB
IFF27 -
(2) 60W T-10/Med.
(2) CFT13W/2GX7
(1) FT27W/2G11
Voltage:
120V or 277V
(Incandescent 120 Volt only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
PBPCBALLBP-
Polished Brass (Shown)
Polished Chrome
Brushed Aluminum
Light Bronze Paint with Brushed Texture
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
I- / F- / F27-
5 lbs.
Lamping:
Finishes:
16"
3 1/2"
-
CATALOG
NUMBER
Luminaire
shown with
FAH6 lens
option.
7"
SUBMITTAL SPECIFICATIONS:
Catalog#:
5250-HB
CISCO
SPECIAL
PRODUCT SPECIFICATIONS:
Finishes:
16"
7"
SUBMITTAL SPECIFICATIONS:
Catalog#:
5250-VHB
CISCO
SPECIAL
16"
7"
3760 West Fourth Street • Winona, MN 55987
1-800-328-5291 • 507-454-5113 • Fax 507-452-8528 • www.winonalighting.com
13
2285-WL_Cyl_prod.qxd
2/2/05
4:00 PM
Page 14
SUBMITTAL SPECIFICATIONS:
3 1/2"
5250
5250
CISCO
-
-
CATALOG
NUMBER
LAMPING
VOLTAGE
FINISH
SPECIAL
PRODUCT SPECIFICATIONS:
4"
Catalog#:
5250
IFF27 -
(2) 60W T-10/Med.
(2) CFT13W/2GX7
(1) FT27W/2G11
Voltage:
120V or 277V
(Incandescent 120 Volt only)
Lens Option:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
OAFAH4FAH5FAH6FAH7-
Extruded Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Standard
PBPCBALLBP-
Polished Brass
Polished Chrome
Brushed Aluminum
Light Bronze Paint with Brushed Texture (Shown)
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
I- / F- / F27-
5 lbs.
Lamping:
16"
Finishes:
7"
SUBMITTAL SPECIFICATIONS:
4 1/2"
3704
3704
DOMINIQUE
-
-
CATALOG
NUMBER
LAMPING
VOLTAGE
LENS
OPTION
FINISH
SPECIAL
PRODUCT SPECIFICATIONS:
6"
Catalog#:
3704
IFF27 -
(2) 60W A-19/Med.
(2) CFT13W/GX23
(1) FT27W/2G11
Voltage:
120V or 277V
(Incandescent 120 Volt only)
Lens Option:
OAFAH4FAH5FAH6FAH7FGH-
Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Faux Glass
BALLBP-
Brushed Aluminum with Black Tape Details/Polished Aluminum Knobs
Light Bronze Paint with Brushed Texture, Black Tape Details/Light
Bronze Painted Knobs
Cherry Wood Finish and Brushed Aluminum Details with Polished
Aluminum Knobs (Shown)
Lamping:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
17 1/2"
Standard
Finishes:
WDCustom
9"
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
IF-
17 lbs.
22 lbs.
SUBMITTAL SPECIFICATIONS:
3 5/8"
3703
3703
TESLA
-
-
CATALOG
NUMBER
LAMPING
VOLTAGE
LENS
OPTION
FINISH
SPECIAL
PRODUCT SPECIFICATIONS:
6"
Catalog#:
3703
IF-
(2) 60W A-19/Med.
(2) CFT13W/GX23
Voltage:
120V or 277V
(Incandescent 120 Volt only)
Lens Option:
OAFAH4FAH5FAH6FAH7FGH-
Opal Acrylic – Etched (Shown)
White Vein Hand Painted Faux Alabaster
Antique (Beige) Hand Painted Faux Alabaster
Gray Vein Hand Painted Faux Alabaster
Beige Vein Hand Painted Faux Alabaster
Faux Glass
Standard
BALLBP-
Brushed Aluminum
Light Bronze Paint with Brushed Texture (Shown)
Custom
CPFCMF-
Custom Painted Finish (Consult Factory)
Custom Metal Finish (Consult Factory)
Special:
STDMOD-
Standard
Modified Standard
Weight:
IF-
5 lbs.
7 lbs.
Lamping:
FAH is our Hand Painted
Acrylic. See page 13 for an
example or visit our website
for more information.
15"
Finishes:
7 1/4"
14
LENS
OPTION
2285-WL_Cyl_prod.qxd
2/2/05
4:00 PM
Page 15
COMBINE
STANDARD AND
CUSTOM TO CREATE UNIQUE
Modified Standard and Custom
LIGHTING SOLUTIONS.
Need more than a Modification?
Our Custom capabilities are unmatched!
Making a standard luminaire
design your own is as easy
as 1-2-3 with Winona Lighting
and Modified Standard.
Winona Lighting began as a custom lighting manufacturer
over forty years ago and has become a recognized industry
Our custom lighting heritage enables us to create new fixture
designs to suit your needs from our standard products.
leader. With custom projects in all fifty states and abroad,
Winona Lighting has the knowledge, skills, and experienced
designers, engineers, and craftsmen to bring your modified
or custom luminaire design to life.
PROJECT INFORMATION:
The sanctuary is
warmly illuminated
with 16 pendants.
Each pendant contains
(6) 250W PAR 38,
(4) 100W PAR 38,
and (17) 67W A-21
incandescent lamps.
The custom painted
finish compliments
the trim color used
throughout the project.
1
Choose the closest matching fixture
Standard
3707 DARNEL
Modified 3707
DARNEL
2
Place “MOD” at the end of the part number
3707 - F - 120V - OA - BAL - MOD
Catalog Number
Lamping Option
Voltage
Lens Option
Finish
Special (STD or MOD)
3
Describe the modification(s) in detail
Original:
3707 • Darnel
Part Number: 3707-F-120V-OA-BAL-MOD
Modifications:
1. Size: 18.00" DIA x 30.00" BH x 54.00" OAD
2. Housing: Use (2) sets of increasing diameter Horizontal Fins with
(4) sets of Angled Vertical Barstock Trim Bars.
3. Lens: Etched 10.00" diameter Opal Acrylic Cylinder with Bottom Lens
and Finial.
4. Finish: Brushed Aluminum with Brushed Chrome Detail.
5. Lamping: (2) FT27/2G11 Fluorescent Lamps with (1) Integral Ballast.
PROJECT:
Tanasbourne Office
Building
ARCHITECT:
Ankrom Moisan
Associated Architects
LOCATION:
Portland, Oregon
PHOTOGRAPHER:
Michael Mathers
PROJECT:
St. Anthony of Padua
ARCHITECT:
Jackson and Ryan Architects
LOCATION:
Houston, Texas
LIGHTING CONSULTANT:
Michael John Smith, LC, AIA,
IALD, IES
PHOTOGRAPHER:
© 2003 Hester+Hardaway,
Photographers
15
2285-WL_Cyl_prod.qxd
2/2/05
4:00 PM
Page 16
www.winonalighting.com
To see our entire line of Decorative, Windirect and Winscape lines, visit
www.winonalighting.com. Download the latest product specifications,
installation instructions,and other information 24 hours a day, 7 days a
week. On a typical product page you will find everything there is to know
about a luminaire!
To the left of the product image is the luminaire description which
includes lamping options and finish choices. Links under the description
will load Adobe Acrobat PDF files of the specifications, submittal drawings, and installation instructions. To the right of the luminaire image you
will find thumbnail images of luminaires from the same series. Clicking on
one of these thumbnails will load that luminaire’s product page.
CLICK
THUMBNAIL FOR
PRODUCT
INFO
THUMBNAILS
LINK TO OTHER
FIXTURES IN
SERIES
DOWNLOAD
SUBMITTAL
SHEETS
DOWNLOAD
OR VIEW
PHOTOMETRICS
DOWNLOAD
INSTALLATION
INSTRUCTIONS
DOWNLOAD
A HIGH
RESOLUTION
PHOTO
Create-A-Specification tool
Whether you have already selected a luminaire or if you want to know what
options are available for the luminaire you are interested in, our exclusive
Create-A-Specification tool will help you create a specification number. Simply
follow the numbered steps by selecting the appropriate item from choices shown
in the drop-down boxes. The results of this search will be the product page for
the luminaire you have selected along with the correct part number.
3760 West Fourth Street • Winona, MN 55987 • 1-800-328-5291 • 507-454-5113 • Fax 507-452-8528 • www.winonalighting.com