OLYMPUS™ on PM3 PAR20 Metal Halide PROJECT: TYPE: CATALOG NUMBER: SOURCE: NOTES: CATALOG NUMBER LOGIC 3" Dia (76mm) OL PM3 MT Example:OL -PAR2035-58/58- SAP -12/12 - 11/11- PM3 - SM -2H35E- MT - Up/Down Up/Down Up/Down Series OL - Olympus Series™ Source PAR2020 - PAR20 Metal Halide (20W) PAR2035 - PAR20 Metal Halide (35W) Lamp (Select Up and Down) 0 308 309 58 59 - - - - - By Others (20W) Metal Halide 8° Spot (20W) Metal Halide 25° Flood 35PAR20/MH/SP (35W) 10° Spot 35PAR20/MH/FL (35W) 30° Flood Finish Standard Finish Premium Finish Powder Coat Color Satin Wrinkle ABP CMG Cascade Mountain Granite Bronze BZP BZW RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI SDS Antique Brass Powder Cracked Ice Sonoran Desert Sandstone Black BLP BLW AQW Antique White CRMCream SMG Sierra Mountain Granite White (Gloss) WHP WHW BCM Black Chrome HUG Hunter Green TXF Aluminum SAP — BGEBeige MDS Mojave Desert Sandstone WCP Weathered Copper Verde — VER BPP NBP WIR Lens Type (Select Up and Down) 9 - Clear (Standard) CAP Brown Patina Powder Clear Anodized Powder 10 - Spread Lens* OCP 12 - Soft Focus Lens* Natural Brass Powder Old Copper Textured Forest Weathered Iron Also available in RAL Finishes See submittal SUB-1439-00 13 -Rectilinear Lens* Shielding (Select Up and Down) 11 - Honeycomb Baffle* *Accommodates up to 2 Lens/Shielding media Ballast Housing PM3 - Universal Power Module 3 Mounting CR - Round CamLock™ SM - Surface Mount (requires side conduit entry) Ballast Type 2H20E - (2) 20W Electronic Metal Halide Ballasts 2H35E - (2) 35W Electronic Metal Halide Ballasts Input Voltage 120 - 120 VAC Input* 277 - 277 VAC Input* MT - 120/208/240/277 Volt Multi Tap (Electronic Ballast) Option MB - Mounting Brackets (Optional for CT or CR Mounting only) B-K LIGHTING 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 12.17.14 DRAWING NUMBER SUB-2057-00 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN. O.C. (71mm) (4) Clearance Holes for 1/4" Fasteners (By Others) OLYMPUS™ 8 3/4" O.C. (224mm) 9 1/4" (236mm) PAR20 Metal Halide 10 1/8" (259mm) 7 7/8" (200mm) on PM3 PROJECT: TYPE: 5 5/8" (142mm) SURFACE MOUNT FRONT VIEW END VIEW SIDE VIEW ( 6 7/8" (173mm) 3 3/8" (84mm) 2 7/8" O.C. (71mm) 3" Dia (76mm) 10 1/8" (259mm) 1/8" 9mm) 9 1/4" (236mm) 3 1/4" (82mm) (4) Clearance Holes for 1/4" Fasteners (By Others) 8 3/4" O.C. (224mm) 3 1/4" (82mm 3 1/4" (82mm) With Supplied Mounting Bracket 4 5/8" (118mm) 10 1/8" (259mm) 7 7/8" (200mm) (4) 3/4" (121mm) Knockouts For Use with Surface Conduit (By Others) 4 5/8" (118mm) 4 5/8" (118mm) 4 5/8" (118mm) 10 1/8" (259mm) 5 1/8" (129mm) 5 1/8" (129mm) 3" Dia. (76mm) 5 5/8" (142mm) 10 1/8" (259mm) 7 7/8" (200mm) 3 1/4" (82mm) With Supplied Mounting Bracket 4 5/8" (118mm) (4) 3/4" (121mm) Knockouts For Use with Surface Conduit (By Others) 10 1/8" (259mm) CAMLOCK™ MOUNT 5 5/8" (142mm) 4 5/8" (118mm) FRONT VIEW SIDE VIEW 10 1/8" (257mm) 3" Dia. (76mm) END VIEW 6 (17 6 7/8" (175mm) 3 1/4" (84mm) 3" Dia (76mm) 3 1/4" (82mm) With Supplied Mounting Plate 3 1/4" (84mm) 4" (100mm) 10 1/8" (259mm) 7 7/8" (200mm) 5 1/8" (129mm) 4" 5 1/8" (100mm) (129mm) 5 1/8" (129mm) 10 1/8" (100mm) 3" (76mm) 1/8" (3mm) 4" (100mm) 4" (100mm) (4) 1/2" Knockouts For Use with Surface Conduit (By Others) 3 1/4" (83mm) 5" O.C. 3" Dia. (127mm) 5 5/8" (142mm) (76mm) CAMLOCK CANOPY 3 1/4" (82mm) With Supplied Mounting Plate 1/8" (3mm) (4) 1/2" Knockouts For Use with Surface Conduit (By Others) 4" (100mm) 10 1/8" (259mm) 4" 5 1/8" (100mm) (129mm) 5" Dia. 10 1/8" (127mm) (257mm) 3" Dia. (76mm) B-K LIGHTING All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com 3" Dia (76mm) SUBMITTAL DATE 12-17-14 DRAWING NUMBER SUB-2057-00 OLYMPUS™ on PM3 PROJECT: TYPE: LAMP DATA 3" Dia (76mm) BK No. Lamp Watts Description Rated Life Center Beam Candlepower CRI CCT(K) 308 20 20PAR20/MH/SP 7,500 13,000 81 3000 8° Spot 309 20 20PAR20/MH/FL 7,500 3,750 81 3000 25° Flood 58 35 35PAR20/MH/SP 9,000 23,000 81 3,000 10° Spot 59 35 35PAR20/MH/FL 9,000 5,000 81 3,000 30° Flood BALLAST ELECTRICAL DATA Beam Angle Beam Type BALLAST TYPE INPUT VOLTS INPUT WATTS INPUT CURRENT CIRCUIT TYPE MINIMUM START TEMPERATURE H20E Electronic 120 24 0.20 HPF -5° F H20E Electronic 277 24 0.09 HPF -5° F H35E Electronic 120 44 0.39 HPF -5° F H35E Electronic 277 44 0.17 HPF -5° F SPECIFICATIONS GreenSource Initiative™ Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Materials Furnished in Copper-Free Aluminum (Type 6061-T6). _______________________________________________________ FIXTURE (Olympus™) Body Fully machined from solid billet. Unibody design provides enclosed, water-proof wireway and integral heat sink for maximum component life. High temperature, silicone ‘O’ Ring provides water-tight seal. Cap Fully machined. Flush mounted lens. Accommodates up to (2) lens or louver media per lamp. Lens Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment. Lamp For use with (2) 35 watt maximum, PAR20 metal halide lamps. Socket Specification grade ceramic body lamp holder rated for 4kV starting pulse. Medium base, nickel-plated copper alloy lamp grip and screw shell. Corrosion resistant coil spring under center contact. Wiring Teflon® coated, 18AWG, 600V, 250° C rated and certified to UL 1659 standard. Hardware Tamper-resistant, stainless steel hardware. Canopy mounting screws are additionally black oxide treated for additional corrosion resistance. _____________________________________________________ BALLAST HOUSING (PM3™) Surface Mount For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation. Round CamLock™ Canopy (Recessed Junction Box) 5” diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4” octagonal junction box. [2] tamper-resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock™ provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 1/2” NPT female conduit entries per end cap for through wiring. Ballasts [2] 20-150 watt, integral, high power factor, electronic metal halide ballasts. Multi-Tap (120/208/240/277V) primary voltage 50/60Hz. H35E available in 120V, or 277V primary voltage. 50/60Hz. _______________________________________________________ Finish StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Finish to match fixture. Warranty 5 year limited warranty. Certification and Listing Olympus™ ETL Listed to ANSI/UL Standard 1598. Certified to CAN/CSA Standard C22.2 No. 250. IP66 Rated. RoHs compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations. Made in USA. PM3 NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard 50/50E and Certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA. ®Teflon is a registered trademark of DuPont Corporation. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. B-K LIGHTING 40429 Brickyard Drive • Madera, CA 93636 • USA 559.438.5800 • FAX 559.438.5900 www.bklighting.com • info@bklighting.com SUBMITTAL DATE 12.17.14 DRAWING NUMBER SUB-2057-00