930 SERIES MINIATURE
BAYONET LAMPHOLDERS
Overview
The 930 Series relampable miniature bayonet
lampholders accommodate T-3 1/4 and T-2 incandescent
lamps and T-3 1/4 neon lamps. This robust lampholder
assembly may be ordered with many decorative lens
styles, plating options and unique termination and
mounting features.
Approvals
UL Listed and CSA Certified. For MIL Spec Lampholders,
contact the factory.
Specification
Housing: Brass. Black nickel, bright nickel, polished
chrome, or satin chrome finishes.
Body: High dielectric phenolic.
Lockwasher: Phosphor bronze. Nickel-plated.
Hex Nut: Brass. Nickel-plated.
Terminals: Solder Lug: Brass, tin-plated. Screw Type: 440 brass, nickel-plated binding head screws.
Wire Leads: 6" leads, #22 AWG, black & white, stranded
copper, PVC insulated, UL/CSA rated 105°C, stripped
1/2". Custom wire options are also available.
Lens: Heat resistant, high strength polycarbonate.
Retainer: Brass. Black nickel, bright nickel, polished
chrome or satin chrome finishes available.
930 Series Maximum Rating: 3 Watts, 250 Volts.
OPTIONAL MOUNTING FLAT
1 - 25/32 MAX.
1/2 MIN THD 11/16-27 UNS-2A
11/32
.660 ± .003
11/16
MAX.
3/16
5/8
CONVEX
.691 ± .003
OPTIONAL D
MOUNTING HOLE
1/16 BY 13/16
O.D. FLANGE
3/32 BY 13/16 ACROSS
FLATS HEX NUT
LOCKWASHER
930 SERIES - SCREW TERMINALS
FRONT MOUNTING 11/16" CLEARANCE HOLE
5/8
3/16
5/8
FLUTED STOVEPIPE
ORDERING INFORMATION:
Lampholders and lens caps may be
ordered separately or as complete
assemblies as shown in the example
below:
Solder Lug
Terminals
Series
Number
930
Termination
4
Solder Lug
5
Screw Type
W
Wire Leads
EXAMPLE: 9 3 0
No Features
Standard
71 0 RN
Black Nickel
Finish
Lampholders
Features
Finish
0 None
4 Black Nickel
Standard
5 Bright Nickel
1 D Hole
Mounting
6 Satin Chrome
(Special
21 Drip Proof
Orders Only)
31 D Hole
Mounting &
Drip Proof
4 0 4 X
7 Polished
Chrome
Stovepipe
Lens
Resistor
X
None
(No resistor
required with
incandescent
lamps)
R 27K OHM
S 33K OHM
72
82
86
87
78
88
79
89
Lens Cap Assembly
Lens Style
Retainer
Flat3
4
Flat4
Black Nickel
Flat Drip Proof3
5
Flat Drip Proof4
Bright Nickel
Convex3
Convex4
6
Convex Drip Proof3
Satin Chrome
Convex Drip Proof4
(special)
7
Polished
Chrome
No Retainer Required
C 56K OHM
F 68K OHM
E 100K OHM
1
2
3
4
5
6
These styles supplied with rubber washers for body and lens.
For proper resistor/neon lamp compatibility, table on back page.
Nondiffusing & translucent colors only.
Diffusing Colors only.
Nondiffusing colors only.
Not recommended for neon lamps.
Lighting Components & Design, Inc.®
·
Standard
71
73
74
75
Stovepipe3
Cylindrical3
Fluted Stovepipe5
Semi-Fluted
Stovepipe5
692 S. Military Trail, Deerfield Bch., FL 33442
·
0
Standard
8
Dripproof
TEL: (954)-425-0123
Red NonDiffusing Lens
Lens Color
Nondiffusing
AN Amber
BN Blue6
CN Colorless
GN Green6
RN Red
WN White
YN Yellow
Translucent6
AT Amber
BT Blue
GT Green
RT Red
WT White
YT Yellow
Diffusing6
AD
BD
CD
GD
RD
YD
Amber
Blue
Colorless
Green
Red
Yellow
FAX: (954)-425-0110
Littelites
LL-11