LOCKNETICS
Heavy Duty Electric Strikes
9000 Series
PowerStrike
The new 9000
Series PowerStrike
provides the most
universal, heavy
duty electric strike
available in the
marketplace today.
It is designed to
accommodate virtually all cylindrical and mortise locksets.
Features include a cast stainless steel
housing, field selectable voltage
12/24VDC, modular fail safe or fail secure
solenoids, four modular monitoring
switches, horizontal adjustment for weatherstripping, and one frame prep which
accepts a variety of mortise locksets with
different latchbolt and deadbolt locations.
Features
■ One frame prep—The design of the
9000 PowerStrike accepts virtually all
commercial grade cylindrical and mortise locksets with one frame preparation.This design accepts a variety of
mortise locksets with different latchbolt and deadbolt locations. Modular
face plates are provided for different
function locksets.
■ Dual voltage, modular solenoid—The
solenoid can accept 12 and 24VDC
input, which is field selectable.
■ Horizontal adjustment—The strike is
provided with two sets of mounting
holes to allow horizontal adjustment.
The alternate mounting position provides a 3/16” adjustment to accommodate weatherstripping and silencers.
Specifications:
Strike cavity: Depth 1”,Width 13/16”,
Height 1-11/16”
■ Current Draw: Dual Voltage,
Field Selectable
0.50 Amp @ 12 VDC
0.25 Amp @ 24 VDC
■
How to Order the 9000 Series:
Example
9010
9010-FS
1. Select Model
2. Select Operation
Fail Secure (standard)-no symbol required
Fail Safe (optional)-specify FS
3. Select Finish
4. Select Options
9010-FS-630
9010-FS-630-LPS
Strike Model Selection Chart by Manufacturer
9010
Accurate
Arrow
Baldwin
Best
Corbin Russwin
Falcon
Marks
Omnia
PDQ
Sargent
Schlage
Yale
9020
9020SYS
9030,
9040
9050
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
*
■
9030SCH
9040SCH
9050SCH
9030YSA
9040YSA
9050YSA
■
*
■
■
■
■
■
■
*Note: Use 9020SYS for the Sargent 8100 series and 9020 for the 8200 series.
Base models are used for most manufacturers.
Specific modular fronts are used for different models.
SYS—suffix model is used for Schlage,Yale and Sargent mortise locksets - with latchbolt
SCH—suffix model is used for Schlage mortise locksets with deadbolt
YSA—suffix models are used for Yale and Sargent with deadbolt
Lock
FS
BPS*
LPS*
KPS
SPS
RCP
Options
Fail Safe—locked when energized
Bolt Position Switch—monitors position of deadbolt (not available on model 9050)
Latch Position Switch—monitors position of latchbolt (not available on model 9040)
Keeper Position Switch—monitors position of keeper
Solenoid Position Switch—monitors position of solenoid
Rectifier for AC operation
*specify hand when ordering LPS and/or BPS for mortise locksets
Lock Finish
Stainless Steel Keeper and Frame are finished Stainless for 630 and 626 finishes and black
for other finishes. Strike front is provided in architectural finish listed below.
Satin Stainless Steel
Bright Brass
Satin Brass
Satin Bronze
ANSI No.
630
605
606
612
US No.
US32D
US3
US4
US10
Dark Bronze
Bright Chrome
Satin Chrome
ANSI No.
613
625
626
US No.
US10B
US26
US26D
93
LOCKNETICS
Heavy Duty Electric Strikes/Exit Devices
9010
Cylindrical Locksets
671 Series
Touchbar
Operation:After releasing the latchbolt the keeper returns to the locked
position.
Magnetic
lock
9020, 9020SYS
Mortise locksets and mortise panic
exit devices, with or without a
deadlatch
Operation:After releasing the
latchbolt the keeper returns to the
locked position.
Note: Use 9020SYS for the
Sargent 8100 series and
9020 for the 8200 series.
9030, 9030SCH, 9030YSA
Mortise locksets where the deadbolt
is used for night latch function only
Operation: Latchbolt released electronically during traffic hours.
Deadbolt manually extended at night
for added security. Deadbolt may be
released electrically but the door will not return to the closed
position.
9040, 9040SCH, 9040YSA
Mortise locksets with a normally
extended 1” deadbolt where lockset is
released, recaptured and contained
Operation: Both latchbolt and deadbolt are released by a single keeper.
Keeper is held open after release so that door may be closed
with deadbolt extended. Keeper returns to locked condition
when bolt re-enters the strike.
9050, 9050SCH, 9050YSA
Mortise locksets where the deadbolt
is not released
Operation:When the deadbolt is
projected manually the strike will not
release.When the deadbolt is retracted access is accomplished by
electrically releasing the keeper.
The 671 Touchbar is a non-latching
electromechanical releasing device
which allows egress at doors
equipped with electric locks.
Pushing the 671 Touchbar at any
point on the bar activates an
internal switch which controls
power to the locking device.
Toll Free: (800) 221-2052
http://www.mfsales.com
■
■
Door
frame
671
bar
Typical Installation
Features
Contemporary touchbar design.
■ Slight pressure at any point on bar activates internal switch
which releases locking device.
■ Only 1/4” movement of bar to activate switch.
■ Heavy Duty aluminum extrusion
■ SPDT Monitoring Switch.
■
Specifications
■ Door Size: 36, 42 or 48 - standard sizes SP (special - specify
frame opening as shown below)
■ Finish: 628 - Clear Anodized Aluminum (standard)
313 - Dark Satin Bronze Anodized Aluminum
Mechanical—
■ Available in standard lengths to fit 36”, 42” and 48” doors.
■ Custom lengths for up to 48” doors also available.
■ Can also be field cut at the installation site.
Electrical Switch—
■ SPDT contacts rated 5A @ 125VAC (3A @ 30VDC)
■ Leads: (3) 20 AWG 18” Long
Option Switch—
■ DPDT contacts rated 5A @ 125VAC (3A @ 30VDC)
■ Leads: (6) 20 AWG 18” Long
Options
■ DP - Double pole, double throw switch
■ CA - 16 foot cable, attached to device
■ AR - 16 inch armored door cord (no wire)
■ AW - 16 inch armored door cord with 24” wire,
4 conductor 20 AWG
■ WD - Wood Door Kit - thru bolts (rivnuts standard)
Standard size TouchBar furnished for door frame
with 1/4” stop (B)
Specify frame opening - (A) i.e., 671SP - 43
A
B
94
Door
cord
Phone: (718) 622-8785 or (516) 352-6262
e-mail: pilgrim@mfsales.com
■
Fax: (718) 789-8346
LOCKNETICS
Exit Alarms
690 Series SmartBar
Exit Releasing Device
The 690 Series SmartBar is an electronic switching device with
no moving parts, which serves as a non-latching exit bar at an
egress door. It allows one motion egress at doors equipped with
electric or electronic locks, with “no prior knowledge” required
by the user.Touching the SmartBar at any point on the bar activates internal circuitry which controls power to the locking
device.The SmartBar provides redundant detection systems to
sense an exit request.The first is a capacitance touch sense circuit which detects a change in capacitance when a person
touches the metal portion of the bar.The second is an infrared
light beam which is directed across the front of the bar. Either
the capacitance or light beam detection will activate the unit.
The patented redundant system provides a high level of life safety and peace of mind to the end user. An optional audible alarm
is available.This feature provides a security alarm to alert when
there is a prolonged unlocked condition caused by a continued
capacitance signal or a continued break in the light beam.
Features
■ Contemporary Design. No moving parts.
■ Heavy Duty aluminum extrusion.
■ SPDT monitoring switch.
■ Door Cord and 16 ft. cable standard.
■ Door Size: 36, 42 or 48 - standard sizes.
SP (special - specify frame opening)
■ Finish: 628 - Clear Anodized Aluminum (standard)
313 - Dark Satin Bronze Anodized Aluminum
Specifications
Mechanical—
■ Available in standard lengths to fit 36”, 42” and 48” doors.
Custom lengths for up to 48” doors also available.
■ Can also be field cut at the installation site.
Electrical—
■ Input: 12 or 24 VAC/DC. Maximum current draw .250 Amps.
■ Switch: SPDT contacts rated 3A @ 30 VDC.
■ Wiring: 9 Conductor Cable - 24 AWG - 16 ft. long
(7 conductors used)
6000 Series SmartExit
Electrified and Electronic Exit Devices
SEL
TEL
MEL/FLL/FUL
PULL
SmartExit
Locknetics introduces SmartExit — an innovative family of electrified and electronic exit devices - designed, and manufactured
by Locknetics. SmartExit features simplified mechanical designs
with state-of-the-art electronic solutions, including on board
access control with outside lever trim. All units feature low
power consumption dual voltage or battery powered operation.
All latching models are UL Listed for A label fire rated openings.
Access control with outside trim provides ability to program
codes or TouchEntry keys with users, toggle, lockout, one time
user, and double use.TouchEntry reader built into bar provides
6010DEL Delayed Egress with ability to release or reset and
6010EDG Electronic Dogging with ability to dog with
TouchEntry key.The access control system also provides the ability to program 150 users and retrieve the 100 event audit trail
information.With the MX500 option 500 user and 500 event
audit trail is available.
Features:
■ Non-handed rim exit device, easy to cut in field with 3
standard sizes: 36”, 42” & 48”
■ Automatic Voltage Selection: 12 or 24VDC
■ Fewer moving parts, investment cast stainless steel latchbolt
& deadlocking latch.
6000 Series continued on following page.
Options
■ AUD - Audible Alarm
■ WD - Wood Door Kit
Standard size SmartBar furnished for door frame with 5/8” stop
Specify frame opening - i.e., 690SP - XX.
95
LOCKNETICS
Exit Devices
6000 Series SmartExit
Electrified and Electronic Exit Devices
Models
■ 6010DEL—Delayed Egress
(Current Draw: 0.400A @ 12VDC or 0.625A @ 24VDC).
15 or 30 second delay and audible alarm upon
unauthorized exit.
■ 6010EUH—Electronic Unlocking Hardwired
(Current Draw: 0.150A @ 12VDC or 24VDC).
Free egress with Locknetics SelectEntry or TouchEntry
progammable access control.
■ 6010EUB—Electronic Unlocking Battery Operated
(4 AA Batteries) No wiring required.
Free egress with Locknetics SelectEntry or TouchEntry
programmable access control.
■ 6010BAC—Basic Access Control Electric Unlocking
(Current Draw: 0.500A @ 12 or 0.250A @ 24VDC).
Free egress with universal access control input. Use access
control device with DPDT contact. Use FLL (Fail Locked) for
Perimeter Access Control or FUL (Fail Unlocked) for
Stairwell Function.
■ 6010BDG—Electrified Basic Dogging
(Current Draw: 0.225A @ 12VDC or 0.450A @ 24VDC).
After activation of dogging feature with control input, the
first push on bar locks down push pad and retracts latch.
Fire alarm or remote control releases bar and latch.
■ 6010EDG—Electronic Dogging
(Current Draw: 0.400A @ 12VDC or 0.625A @ 24VDC).
After activation of dogging feature with TouchEntry key or
other signal, the first push on bar locks down push pad and
retracts latch and unlocks outside trim. Fire alarm returns
device to latched position. SEL and TEL trims are unaffected
by fire alarm.
■ 6010REX—Request to Exit Switch DPDT
Latching exit device with push pad monitoring switch for
activation of other equipment.
■ 6020REX—Request to Exit Switch DPDT
Non-latching exit bar with push pad monitoring switch for
activation of other equipment.
SEL
TEL
MEL/FLL/FUL
PULL
SmartExit Access Control with Outside Trim
■ SEL: SelectEntry Lever Trim—includes both programmable
keypad and TouchEntry data key reader with emergency
mechanical key override.
■ TEL:TouchEntry Lever Trim—includes programmable
TouchEntry data key reader with emergency mechanical
key override.
96
Toll Free: (800) 221-2052
http://www.mfsales.com
■
■
SmartExit Access Control with Outside Trim (con’t.)
■ MEL: Mechanical Entry Lever Trim—mechanical lever trim
with mechanical cylinder.
■ FLL: Universal Access Control Trim—Fail Locked.
Universal trim for use with any DPDT access control system.
Perimeter Access Control Function.
■ FUL: Universal Access Control Trim—Fail Unlocked.
Universal trim for use with any DPDT access control system.
Stairwell Function.
■ ‘Z’ Pull with mechanical cylinder.
Outside Trim Options
PRODUCT
MODEL
AND
DESCRIPTION
PROGRAMMABLE
NO ONBOARD
TRIM ACCESS
REQUIRED CONTROL TRIM
SEL
TEL
■
■
6010EUH
Electronic
Unlocking
Hardwired
■
■
6010EUB
Electronic
Unlocking
Battery Powered
■
■
Rim Exit Devices
6010DEL
Delayed
Egress
■
6010BAC
Basic Access
Control
Universal Access
Control Access
ADD ACCESS
CONTROL TO
UNIVERSAL
TRIM
MECHANICAL
OUTSIDE
TRIM
FLL
MEL PULL
FUL
■
■
■
■
■
■
■
■
■
■
6010BDG
Basic
Electronic
Dogging
Local or Remote
■
6010EDG
Electronic
Dogging
■
6010REX
Request
to Exit
■
6020REX
Request to Exit
No exterior trim available on non-latching bars
■
■
* *
■
■
■
*RXL Option recommended when used for electromagnetic locks.
Phone: (718) 622-8785 or (516) 352-6262
e-mail: pilgrim@mfsales.com
■
Fax: (718) 789-8346
* *
■
LOCKNETICS
Exit Devices
6000 Series SmartExit
Electrified and Electronic Exit Devices
Options
Option and
Description
6010 6010 6010 6010 6010 6010 6010 6020
DEL EUH EUB BAC BDG EDG REX REX
ATH
Anti-Tamper Hardware
■
■
■
ATR
Audit Trail Retrieval
■
■
■
BOCA
Version of 6010DEL
■
DSM
Door Status Monitor
■
* *
MDE
Monitoring-Latchbolt,
DSM & MBS
■
*
■
MON
MonitoringLatchbolt & DSM
■
MX500
■
Memory Expansion for
500 Users, allows
programming of 500 users
and retrieval of the
past 500 events
■
RXL
■
Request to Exit Switch
activates when latch retracts
* *
■
■
■
■
■
■
Accessory and
Description
■
■
■
■
■
■
6010 6010 6010 6010 6010 6010 6010 6020
DEL EUH EUB BAC BDG EDG REX REX
SNC
Smart Network Controller
■
■
GBK
Glass Bead Kit
■
■
■
■
■
■
■
SSK
Strike Shim Kit
■
■
■
■
■
■
■
SSD
Security Screw Driver
for Anti-Tamper Hardware
■
■
■
■
■
■
■
■
KD
Cylinder Keyed
Different for Outside Trim
■
■
■
■
■
■
■
■
TEK1
TouchEntry key
■
■
■
■
TEK2
TouchEntry key w/fob
■
■
■
■
TEP1
Basic Programmer
■
■
■
■
TEP2
Intermediate Programmer
■
■
■
■
CIP
Computer Interface Pack
■
■
■
■
TEP3
Computer Programmer
■
■
■
■
■
■
*
*
■
■
*Options are not available in conjunction with the MON or MDE option
Finishes
Outside trim escutcheon is finished in satin black texture powder coat, lever handle and pushpads are available in the finishes
shown below. Housing and access cover are finished in satin
black anodized, and end caps are finished in black texture powder coat. PULL is available in 626-standard or 335-Satin Black.
OUTSIDE TRIM FINISH
612—Satin Bronze
605—Bright Brass
625—Bright Chrome
626—Satin Chrome (Std)
Accessories
EXIT DEVICE FINISH
628—Satin Aluminum (Std)
612—Satin Bronze
605—Bright Brass
625—Bright Chrome
626—Satin Chrome
628SF—Satin Aluminum (Spcl)
630—Satin Stainless
SP313—Dark Satin Bronze
■
■
■
How to Order
How to order SmartExit:
Example:
Specify exit device model
6010EUH
Specify finish of device
6010EUH-626
Specify door opening and dimension
6010EUH-626-36
Specify outside trim
6010EUH-626-36-SEL
Specify options
6010EUH-626-36-SEL-ATR-MON
Specify accessories
6010EUH-626-36-SEL-ATR-MON-GBK
97