PSC-HB series
High Bay Occupancy Sensor
PIR/Fixture Mount box/Line voltage
SPECIFICATIONS:
OVERVIEW:
The PSC-HB-I-FM series
PHOTOCELL
occupancy sensors are
 Photocell can prevent
specifically designed for
lighting from turning on if
applications such as warehouse,
adequate daylight is
distribution centers and other
available.
high ceiling areas. The products
can be easily installed directly
INPUT VOLTAGE OPTIONS:
to the fluorescent fixture. With
 120/277 V input voltage
well developed PIR sensor
 347/480V input voltage
technology and circuit design,
this sensor line offers excellent
DUAL RELAY
sensitivity without false tripping
 Dual relay allows the
issues. The sensor comes with a
sensor to control two
360°high bay lens suitable for
ballasts in the same fixture.
mounting heights of up to 40 ft
Two loads will be on/off
and a low bay lens for mounting
alternately.
heights up to 20 feet.
FEATURES
 Digital passive infrared sensor
 LED indicator
 Front dip switch for time delay
and sensitivity control
 Supports mounting height up to
40ft
 Photocell version for daylight
harvesting
 Universal input voltage
 360°coverage pattern
PHYSICAL SPECS:
 Size 4’’H ×4’’W×2.16’’D
(102.58cm*102.58cm*55cm)
 Weight: 8 oz
 Mounting: ½’’ knockout
Ceiling Mount
 Color: White
OPTIONS:
SENSOR OPERATION
With PIR sensors, occupant
motion is sensed utilizing
passive infrared technology to
compare the infrared energy of
the moving object with that of
the background space.
PSC-HB-I-FM series sensors
are designed to minimize
“FALSE ON” but still maintain
high sensitivity. Factory preset
for easy installation and out-ofthe-box performance, with
optional DIP switches for
customization of time delay,
sensitivity and any combination
of daylighting / occupancy
functionality.
ELECTRICAL SPEC
 Maximum Load
800W@ 120VAC
1200W@ 277VAC
1500W@ 347VAC
2000W@ 480VAC
 Minimum Load None
 Frequency: 50/60 Hz
ENVIRONMENTAL SPEC:
 Operating Temp:
14°to 160°F (-10°to 60°C)
 Storage Temp
14°to 160°F (-10°to 60°C)
 Relative Humidity: 20 to 90%
non-condensing
Accessories:





LBL: Low bay lens
HBL: High bay lens
AL1: Center aisle lens
AL2: End of aisle lens
EM1: Extended module
HOW TO ORDER
Catalog No.
PSC-HB-I-FM-100
Description
PIR basic
PSC-HB-I-FM-110
PIR w/photocell
PSC-HB-I-FM-200
PIR basic
PSC-HB-I-FM-210
PIR w/photocell
Voltage
120VAC/
277VAC
120VAC/
277VAC
347VAC/
480 VAC
347VAC/
480 VAC
Load Capacity
0-800W ballast at 120V
0-1200W ballast at 277V
0-800W ballast at 120V
0-1200W ballast at 277V
0-1500W ballast at 347V
0-2000W ballast at 480V
0-1500W ballast at 347V
0-2000W ballast at 480V
2544 Industrial Blvd. West Sacramento California 95691 U.S.A
Tel: 916- 371-8080 Fax: 916- 371-6666 www.mcwonginc.com
PSC-HB series
WIRING DIAGRAM
PSC-HB-I-FM-1X0
ASSEMBLY & MOUNTING
For best performance,
sensor mounting position
must allow for clear lens
field-of-view. Fixture
housing or heat source
blocking lens will limit
operational reliability.
PSC-HB-I-FM-2X0
DIP SWITCH INSTRUCTION
PIR sensitivity (0: off; 1: on)
12
3 4 5
↓ ↓ 100% high ↓ ↓ ↓ 10 seconds
↓ ↑ 90%
↓ ↓ ↑ 20 seconds
↑ ↓ 80%
↓ ↑ ↓ 30 seconds
↑ ↑ 70%
↓ ↑ ↑ 1 minute
↑ ↓ ↓ 2 minutes
↑ ↓ ↑
5 minutes
↑ ↑ ↓ 10 minutes
↑ ↑ ↑ 20 minutes
FIELD OF VIEW
High bay lens (max 40ft mounting height)
Low bay lens (max 20ft mounting height)
2544 Industrial Blvd. West Sacramento California 95691 U.S.A
Tel: 916- 371-8080 Fax: 916- 371-6666 www.mcwonginc.com
6
↓
↓
↓
7
↓
↓
↑
8
↓
↑
↓
sensor
sensor+ daylight sensor
daylight sensor