LYNX
Vandal-resistant surface-mounted luminaires for wall or ceiling with symmetrical light distribution.
Circular design available in 2 diameters: 265 mm and 345 mm.
Protection rating against dust and moisture: complete IP65.
Protection rating for resistance to harmful mechanical impacts: IK10.
Very robust body made of die-cast aluminium, treated against corrosion and coated with polyester powder available in
various colour finishes, customized RAL under request.
High purity sandblasted anodised aluminium reflector to get the best photometric results.
Impact resistant cover made of clear polycarbonate (IK10). Optional clear glass diffuser (IK05).
Frosted or painted diffuser finishes under request.
Temperature resistant silicon rubber gasket.
Anti-condensation device.
Optional supply of 304 stainless steel vandal-resistant screws.
The luminaire is supplied with the LED module. Module options:
CRI>80.
3000K or 4000K.
Luminous flux from 1310lm up to 4160lm.
Integral driver included. Electrical options for the driver: DALI/ DSI.
Passive temperature management: heat dissipation via the fixture body itself.
Mounting to the ceiling by two securing holes. Cable entry from the top of the luminaire.
Indoor and outdoor spaces in schools, sport areas, healthcare centers, car parks and so on.
IP65 SURFACE-MOUNTED DOWNLIGHTS 353
LYNX
ACCESSORIES
A N T I - VA N D A L S C R E W S
Screwdriver with hexagon key. Reference F2.A1.
Screws : pin hexagon socket security metric screws, similar head DIN7991.
Made of 304 stainless steel.
Available for fixtures of 265mm and 345mm exterior diameter.
F2.A
REFERENCE COMPOSITION: F2.A0265 : anti-vandal screws for fixture of 265mm exterior diameter.
F I N I S H E S
BODY
1 - RAL9010 : Pure White
5 - RAL1036: Pearl Gold Bright
7 - RAL9006: White Aluminium
6 - Metallic Lacquer RAL9022: Chrome
2 - RAL9005: Jet Black
3 - Satin Bronze
4 - RAL7016: Anthracite Grey
More finishes are available on page 417.
For customized RAL colour, please contact us.
DIFFUSER
01
Clear
02
Frosted
03
Frosted inside/
clear outside
04
Frosted outside/
clear inside
05 Red
08 Yellow
11 Light Blue
06 Orange
09 Citric Green
12 Sea Blue
07 Amber
10 Dark Green
13 Dark Blue
Glass diffuser available. If a glass diffuser is required, please note “G” after the diffuser finish : 01G 02G, 03G or 04G.
REFERENCE COMPOSITION : 101LNX.1.01-I023S : RAL9010 Pure White body | Clear polycarbonate diffuser.
101LNX.3.04G-I023S: Satin Bronze body | Frosted outside/ clear inside glass diffuser.
354 IP65 SURFACE-MOUNTED DOWNLIGHTS
LYNX
Vandal-resistant surface-mounted luminaire for ceiling or wall with symmetrical light distribution.
Luminaire with circular design in diameter 265mm.
Protection rating against dust and moisture: complete IP65.
Protection rating of resistance to harmful mechanical impacts: IK10.
Very robust body made of die-cast aluminium, treated against corrosion and coated with polyester
powder available in various colour finishes, customized RAL under request.
High purity sandblasted anodised aluminium reflector.
Impact resistant cover made of clear polycarbonate. Optional clear glass diffuser (IK05).
Frosted or painted diffuser finishes under request.
Temperature resistant silicon rubber gasket.
Anti-condensation device.
Optional supply of 304 stainless steel vandal-resistant screws.
The luminaire is supplied with the LED module.
Integral driver included.
Passive temperature management: heat dissipation via the fixture body itself.
Mounting to the ceiling or to the wall by three securing holes. Cable entry from the top of the luminaire.
IP65
IK10 960º
+ELEC
L
N
2
3
4
+
+RAL
Scheme
Beam angle
70
102º
102º
Kg
2,74 Kg
6 0
Reference
W
lm
CRI
K
LOR
101LNX.1.01-I023
12W
1310lm
>80
3000K
63%
101LNX.1.01-I024
12W
1450lm
>80
4000K
63%
101LNX.1.01-I027
17W
1820lm
>80
3000K
63%
101LNX.1.01-I028
17W
2020lm
>80
4000K
63%
Electrical equipment*
S: Standard
*Add the suffix -S after the reference to indicate your electrical equipment choice.
Body finishes : .1 RAL9010 Pure White .7 RAL9006 White Aluminium .2 RAL9005 Jet Black .4 RAL7016 Anthracite Grey .5 RAL1036 Pearl Gold Bright
.6 Metallic Lacquer RAL9022 Chrome .3 Satin Bronze
Diffuser finishes: .01 Clear .02 Frosted .03 Frosted inside/clear outside .04 Frosted outside/clear inside. Other diffuser finishes are also available.
REFERENCE COMPOSITION: 101LNX.4.01-I027S: 17W 1820lm CRI>80 3000K module | RAL7016 Anthracite Grey body| Clear polycarbonate | Standard
driver.
101LNX.1.01-I024
356 IP65 SURFACE-MOUNTED DOWNLIGHTS
Finishes page 354
LYNX
Vandal-resistant surface-mounted luminaire for ceiling or wall with symmetrical light distribution.
Luminaire with circular design in diameter 345mm.
Protection rating against dust and moisture: complete IP65.
Protection rating of resistance to harmful mechanical impacts: IK10.
Very robust body made of die-cast aluminium, treated against corrosion and coated with polyester
powder available in various colour finishes, customized RAL under request.
High purity sandblasted anodised aluminium reflector.
Impact resistant cover made of clear polycarbonate. Optional clear glass diffuser (IK05).
Frosted or painted diffuser finishes under request.
Temperature resistant silicon rubber gasket.
Anti-condensation device.
Optional supply of 304 stainless steel vandal-resistant screws.
The luminaire is supplied with the LED module.
Integral driver included. Electrical options for lighting control: DALI/ DSI.
Accessories for dimming devices are shown at the end of the catalogue.
Passive temperature management: heat dissipation via the fixture body itself.
Mounting to the ceiling or to the wall by three securing holes. Cable entry from the top of the luminaire.
IP65
IK10 960º
+ELEC
L
N
2
3
4
+
+RAL
Scheme
Beam angle
Kg
4,71 Kg
6 0
Reference
W
lm
CRI
K
LOR
102LNX.1.01-I023
12W
1310lm
>80
3000K
79%
Electrical equipment*
102LNX.1.01-I024
12W
1450lm
>80
4000K
79%
102LNX.1.01-I027
17W
1820lm
>80
3000K
79%
102LNX.1.01-I028
17W
2020lm
>80
4000K
79%
S: Standard
102LNX.1.01-I035
24W
2630lm
>80
3000K
72%
D:DALI/DSI/switchDIM/
corridor FUNCTION
102LNX.1.01-I036
24W
2900lm
>80
4000K
72%
102LNX.1.01-I039
37W
3790lm
>80
3000K
72%
102LNX.1.01-I040
37W
4160lm
>80
4000K
72%
85º
80
85º
85º
84º
*Add the suffix -S/ -D after the reference to indicate your electrical equipment choice.
Body finishes : .1 RAL9010 Pure White .7 RAL9006 White Aluminium .2 RAL9005 Jet Black .4 RAL7016 Anthracite Grey .5 RAL1036 Pearl Gold Bright
.6 Metallic Lacquer RAL9022 Chrome .3 Satin Bronze
Diffuser finishes: .01 Clear .02 Frosted .03 Frosted inside/clear outside .04 Frosted outside/clear inside. Other diffuser finishes are also available.
REFERENCE COMPOSITION: 102LNX.1.03-I040D: 37W 4160lm CRI>80 4000K module | RAL9010 Pure White body | Frosted inside/clear outside polycarbonate
| DALI/DSI/switchDIM/corridor FUNCTION driver.
102LNX.01.1-I024
Finishes page 354
102LNX.01.1-I036
IP65 SURFACE-MOUNTED DOWNLIGHTS 357