INTELLIGENT BATTERY
CHARGER SERIES
This new charger has built-in intelligence
Designed to deliver exactly the right amount of
charge automatically every time
Manufactured to BS3456, IEC335, UL1236,
EN60335, CE mark to ENB5008 – 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Microprocessor controlled
Short circuit protection
Reverse polarity protection
High temperature protection
Soft start current control
Fast constant current bulk charge
3-Stage charging CI-CV-float
Constant voltage float/standby
Proportional timing
Flexibility – to match battery specification
Output leads: 1m long with 6.3 x 0.8mm
insulated terminals
Dimensions: 102 x 61 x 47mm
Weight: 410 grammes (approx)
UK manufactured
LED indication of float charge, bulk charge, short
circuit, reverse polarity, thermal shutdown.
Short Circuit Protection – Prevents damage
to the charger if the dc output is short circuited.
Visual indication is by alternate flashing red and
green indicators.
Reverse Polarity Protection – Prevents damage to the charger if the battery is connected in
reverse. Visual indication is by a continuous flashing red indicator.
High Temperature Protection – If the internal case temperature rises to an unusually high
level then the system will shut down. When the temperature has settled to a safe level the full
charge current will be available. The visual warning for high temperature is by simultaneous
flashing red and green indicators.
Soft Start – On power up the system will enter a “soft start” mode. This means that the charge
current will build up slowly. During this time the charger will scan intensely for possible faults i.e.
reverse battery, short circuit etc.
Constant Current Bulk Charge & 3 Stage Charging – Provides the fastest possible way
to recharge the battery without overcharging.
Constant Voltage Float – Compensates for self discharge to hold the battery at peak charge
ready for use. The battery can be left on charge until required, there will be no overcharging.
Proportional Timing – Varies the second (constant voltage) stage in proportion to the time
taken for the first stage (constant current). This allows optimal charging by eliminating the
compromise of fixing charge timers. When the charger enters float charge mode the battery is
100% fully charged.
Current
Voltage
Voltage (bulk)
Voltage (float)
Input Voltage (options) YUASA Part No.
300mA
6V
7.25V
6.83V
230/110VAC
YCP03A6
300mA
12V
14.5V
13.65V
230/110VAC
YCP03A12
300mA
24V
29.0V
27.3V
230/110VAC
YCP03A24
600mA
6V
7.25V
6.83V
230/110VAC
YCP06A6
600mA
12V
14.5V
13.65V
230/110VAC
YCP06A12
1Amp
6V
7.25V
6.83V
230/110VAC
YCP1A6
Yuasa Battery Sales
(UK) Ltd
Hawksworth
Industrial Estate, Swindon,
Wiltshire SN2 1EG
Tel: 01793-645700
Fax: 01793-645701
Website:
www.yuasa-battery.co.uk
Registered number 1548820
Cat. No.
IBC2SFMay02
E&O.E.