y
ant
r
r
a
sw
r
a
e
5y
Proximity Sensors Inductive
Short body, Stainless Steel Housing
Types IA, M5 w/short-circuit protection
• Miniature stainless steel housing M5
• Short body
• Sensing distance: 0.8 mm
• Power supply: 10 to 30 VDC
• Output: Transistor NPN/PNP, make or break switching
• Protection: Transients, reverse polarity and short-circuit
protection
• LED-indication for output ON
• 2 m PVC cable or M8 plug
Product Description
Ordering Key
Miniature inductive proximity
sensor with reduced body
length. Output configuration
for NPN/PNP with both NO
Ind. prox. switch
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Connection
Protected
and NC types as standard.
M5 stainless steel housing.
Connection with 2 m PVC
cable or M8 plug.
IA 05 BSF 10 NO M5 P
Type Selection
Rated
Conn.
operating type
dist. (Sn)
Ordering no.
Transistor NPN
Make switching
Ordering no.
Transistor NPN
Break switching
Ordering no.
Transistor PNP
Make switching
Ordering no.
Transistor PNP
Break switching
0.8 mm 1)
0.8 mm 1)
IA 05 BSF 10 NO P
IA 05 BSF 10 NO M5 P
IA 05 BSF 10 NC P
IA 05 BSF 10 NC M5 P
IA 05 BSF 10 PO P
IA 05 BSF 10 PO M5 P
IA 05 BSF 10 PC P
IA 05 BSF 10 PC M5 P
1)
Cable
Plug
For flush mounting in metal
Specifications
Rated operational volt. (UB)
Ripple
Rated operational current (Ie)
Continuous
No-load supply current (Io)
Voltage drop (Ud)
Protection
Frequency of operating
cycles (f)
Indication for output ON
Effective operating dist. (Sr)
Usable operating dist. (Su)
Ambient temperature
Operating
Storage
10 to 30 VDC (ripple included)
≤ 10%
≤ 200 mA
≤ 10 mA (ON)
< 1.0 V (@ Imax)
Transients, reverse polarity
and short-circuit protection
Degree of protection
Housing material
CE-marking
Connection
Cable
Plug
IP 67 (Nema 1, 3, 4, 6, 13)
Stainless steel, AISI 303
Yes
2 m, PVC, oil proof
AWG 26/ 3 x 0.15 mm2
M8, CONH5A-xxx Serie
2000 Hz
LED, red
0.9 x Sn ≤ Sr ≤ 1.1 x Sn
0.85 x Sr ≤ Su ≤ 1.15 x Sr
-25° to +70°C (-13° to +158°F)
-30° to +75°C (-22° to +167°F)
Specifications are subject to change without notice (05.10.2007)
1
IA, M5 w/short-circuit protection
Wiring Diagrams
+
1 BN
1 BN
+
1 BN
+
1 BN
+
4 BK
2 BK
2 BK
4 BK
3 BU
3 BU
-
NPN - Make switching
-
NPN - Break switching
3 BU
3 BU
-
PNP - Make switching
PNP - Break switching
Installation Hints
To avoid interference from inductive voltage/
current peaks, separate the prox. switch power cables from any other power cables, e.g.
motor, contactor or solenoid cables
Relief of cable strain
Protection of the sensing face
Switch mounted on mobile carrier
A proximity switch should not serve as
mechanical stop
Any repetitive flexing of the
cable should be avoided
Incorrect
Correct
The cable should not be pulled
Dimensions
M5x0.5
M5x0.5
21
40
21
25
LED
LED
M8 x 1
IA 05 BSF 10..P
2
IA 05 BSF 10 .. M5P
Specifications are subject to change without notice (05.10.2007)