CLEAN
Clean-room luminaire
Three­level luminaire
concept for clean­rooms
in healthcare settings and
in industry.
linked
All order numbers in the PDF are linked
to the Zumtobel online catalogue.
Bregenz Regional Hospital | AT
Architects: Baumschlager Eberle, Lochau | AT
3
Light for clean-rooms
A doubly inspiring challenge
Quality factor cleanliness, quality factor light
Clean-rooms probably have their origins in medicine. It was here
that the connection between hygiene and successful healing first
became evident. Precautions were repeatedly refined, starting with
sterilisation of instruments and eventually making sure that
­o p­e r­a ting theatres were as sterile as possible.
The realisation that not just people but also processes and prod­
ucts benefit from clean­li­n ess can be traced back to the early days
of nuclear engineering when it first became ne­c essary to solve the
problem of the spread of radioactivity through fine dust and air­
borne particles.
Nowadays, clean-rooms are used in a very wide variety of manufac­
turing areas ranging from pharmaceuticals through to precision en­
gineering and micromechanics or in biological and genetic research
and even in the food industry. Ever more exacting quality require­
ments are reflected in the constant growth of manufacturing in
clean-rooms. Microelectronics in particular is forcing industrial
clean-room technology to face up to more and more fresh challenges.
Foodstuff manufacturers are expected to produce products that are
free from additives and preservatives but with the longest possible
shelf lives. Here, too, clean-room technology offers a broad range
of solutions.
All these very different appli­c ation areas also involve an equally dis­
parate range of vis­u al tasks: from illuminating a circulation zone in
an operating area through to extremely high illuminance levels in a
labora­tory, there is a very diverse range of applications in terms of
both lighting and specific to clean-rooms issues.
LEAN SUPREME was distinguished
C
with the „iF Design Award 2006“.
zumtobel.com/clean
5
CLEAN SUPREME
The clean-room luminaire for areas with
extreme requirements
CLEAN ADVANCED
The clean-room luminaire for areas with
exacting requirements
CLEAN CLASSIC
The clean-room for areas with
increased requirements
As a luminaire expert, Zumtobel has made good use of
the experience of clean-room designers and combined
it with the very l­atest lighting technology. The result is a
three-level luminaire concept for clean-rooms, which is
geared towards both the dictates of that environment as
well as particular v­ isual tasks.
Fitting of clean-rooms
Improved results justify greater investment
Benefits of clean-room technology
The purpose of clean-room technology is to protect pa­
tients and processes as well as manufactured products
against contamination of any sort. Pollution by organic
or inorganic particles of matter classified as contam­
ination is strictly monitored: no matter how small they
are, the number of airborne dust particles, pollen, bacte­
ria, ­v iruses and aerosols must be as small as possible.
50 µm
25 µm
Smoke
particle
Height of a
fingerprint
Cross section
of a human hair
0 µm
Virus
Tobacco smoke
Bacteria
Hairs
Abraded metal
particles
Sand
0.0001 0.01 0.1
1
10
100
1000
µm
Comparison of particle sizes: international stand­a rds
define limit values in terms of the permitted maximum
number of par­t icles, depending on par­t icle size.
Airflow systems demand specific construction designs
One of the basic criteria for the requirements placed on equipment
in clean-rooms is the ­n ature of the airflow system. The CLEAN lumi­
naire has been designed for use in all clean-room classes with a
mixed airflow. In this commonly encountered airflow system, air
enters the clean-room with a turbulent flow, thereby causing continuous d
­ ilution and “cleaning”. According to Good Manufacturing
Practice (GMP) classification, clean-room Classes C to E and ISO
Classes 6 to 9 can be achieved using this airflow s­ ystem. Cleanrooms with low-turbulence displacement flow, which are more ex­
pensive to build, allow air to initially enter the clean-room with low
turbulence. The laminar flow system minimises contamination and
any contaminant is quickly eliminated. Clean-rooms in ISO Classes
1 to 6 and GMP classes A and B are areas where this airflow sys­
tem is used.
Mixed flox
Laminar flow
7
Using the number of p
­ articles as a yardstick
­ articles
The strategy in clean-rooms is to minimize the number of p
released by humans and equipment, and eliminate them immediately.
Even the slightest contamination may ­r esult in loss of function, relia­
bility, medical compatibility or other essential quality characteristics.
Although it sounds simple, in practice this requires an e
­ xtensive raft
of technical and organisational measures: from expensive ventilation
and air conditioning systems through to special codes of conduct
for employees and extremely ­e xacting quality requirements for
equipment and hence lighting.
Nomenclature
DIN EN
ISO 14644-1
Maximum permissible particulate count per cubic metre
­a ccording to DIN EN ISO 14644-1
US Fed.
Std.209E*
VDI 2083
EU GMP
Guidelines
0.1 µm/m 3
0.2 µm/m 3
ISO class 1
10
2
ISO class 2
100
24
ISO class 3
1
1
ISO class 4
10
2
ISO class 5
0.3 µm/m 3
0.5 µm/m 3
10
4
1 000
237
102
35
1 240
265
106
35,3
1 500
330
140
45
10
83
2 370
1 020
352
12 400
2 650
1 060
353
15 000
3 300
1 400
450
100
832
100 000
3
23 700
10 200
3 520
26 500
10 600
3 530
33 000
14 000
3 520
A/B
1 000 000
237 000
102 000
35 200
20
8 320
293
45 000
10 000
300
352 000
83 200
2 930
100 000
3 000
35 300
4
ISO class 7
10,000
247
353 000
5
450 000
C
ISO class 8
100,000
6
D
ISO class 9
* since withdrawn
The cleanliness classes in German Standard VDI 2083 are comparable with the classifications in
International Standard DIN EN ISO 14644-1 and US Federal Standard 290E and the EU GMP Guideline.
29
1 000
3 520
1,000
5.0 µm/m 3
8
10 000
100
ISO class 6
1.0 µm/m 3
2 470
2 900
352 000
3 520 000
832 000
29 300
3 350 000
124 610
24 700
4 500 000
1 000 000
30 000
3 520 000
35 200 000
29 000
8 320 000
293 000
Fitting of clean-rooms
Different sector-specific criteria
Suitability for use in clean rooms covers not only measurable quan­
tities such as particle emission, but also a large number of sec­
tor-based cleanliness requirements such as resistance to chemi­
cals, surface quality, flow behaviour or electrostatic characteristics.
These terms and others are defined in the following stand­a rds and
codes of practice:
General:
•C lassification of air cleanliness – clean-rooms and ­a ssociated controlled environments
according to DIN EN ISO 14644-1 (Federal Standard 209 has since been withdrawn)
• Clean-room technology and clean-room compatibility of equipment VDI 2083
•E uropean Hygienic Engineering & Design Group (EAGDG)
Industrial application areas:
• Good Manufacturing Practice (GMP) Guidelines – pharmaceuticals
• Food and Drug Administration (FDA) – pharmaceuticals and foodstuffs
• Medicinal Product Law
•E U Pharmaceutical Regulation – Good manufacturing practices Volume 4 – (Medicinal
products for human and veterinary use)
•H azard Analysis Critical Control Point (HACCP) Regulations – foodstuffs
Hospital application areas:
• VDI 2167 Building services in hospitals
• DIN 1946-4 Ventilation and air conditioning Part 4 (Ventilation in hospitals)
­ easures to protect against d
­ eposits and
CLEAN boasts a host of m
microbacterial contamination:
•n on-porous, smooth and therefore easy-to-clean surface
• surface is resistant to cleaning agents and disinfectants
•g ood electrostatic characteristics to prevent a
­ ttraction of dirt through electro­s tatically
charged surfaces
• resistant to chemicals
•h igh-grade materials and careful workmanship (apparent in smooth edge-transitions,
among other features)
•n o re-entrant angles on seams, joints or screws; these may hinder elimination of
particles by the flow of air and are difficult to clean
What makes a luminaire a clean-room luminaire?
Zumtobel lighting experts turned to the internationally recognised
skill centre of competence for ultra-high-purity production and mi­
croproduction – the Fraunhofer Institute IPA in Stuttgart/Germany.
The German VDI 2083 Guideline forms the basis of the measure­
ments made during the course of IPA qualification. It describes a
standardised procedure for all equipment used in a clean-room.
The common criterion for the clean-room compatibility of luminaires
and all other equipment is their particle emission behaviour. “Air­
borne particle emission” is used as a classi­fication criterion in all
inter­n ational standards (see page 6). The relevant maximum value
for the permissible concentration of particles of a specific par­t icle
size constitutes the class limit.
9
Test setup:
A defined volume of air is aspirated by an air sampling
probe and fed into a test chamber. The particles inside
this test chamber are monitored and r­ ecorded appropri­
ately. In order to unambiguously l­ocate and qualify par­
ticle sources and the main causes of contamination,
localisation measurements are made. Individual meas­
urements are made at critical points to achieve this.
Exceding the relevant limit v­ alues is decisive in order
to classify the luminaires. If a limit value is not exceeded
with a certainty of at least 95 %, the respective item of
equipment may be regarded as suitable for use in this
air cleanliness class.
IPA qualification in accordance with VDI 2083
To simulate representative stress on the CLEAN ADVANCED and CLEAN SUPREME
fittings, and measure the e
­ mission of airborne particles, each luminaire was placed in
a specially designed laboratory setup.
Besides metrological investi­g ations, the suitability of an
item of equipment for clean-room use is evaluated and
­d ocumented in terms of the compatibility of its design
with hygiene in particular. Important standards and reg­
ulations such as GMP and FDA Guidelines lay down
corresponding design specifications relating to the tech­
nical implementation and workmanship of equipment.
Fraunhofer IPA clean-room experts defined a total of eight measurement points for
measuring the emission of ­a irborne particles by the CLEAN range.
Fraunhofer IPA confirms clean-room compatibility
Based on extensive measurements and expert assessments at the Fraunhofer Institute
IPA, the experts declare that:
“The CLEAN SUPREME clean-room luminaire meets the requirement for clean-rooms in
ISO Classes 3 to 9 (according to DIN EN ISO 14644-1) and for clean-room environments
in GMP Classes C to F (Good Manufacturing Practice). The CLEAN ADVANCED cleanroom luminaire is also suitable for clean-rooms in ISO Classes 3 to 9.”
Health & care
Light for health
Medical progress demands outstanding light
In hospitals, rehabilitation ­c entres and medical practices, hygiene
and cleanliness are a permanent feature of everyday routine. Excep­
tionally high l­evels of concentration are often expected of physicians
and medical staff. Excellent lighting conditions are a must in order
to accomplish difficult visual tasks.
Illuminance levels of roughly 2,000 lx are recommended in the im­
mediate vicinity of the operating table, and up to 1,000 lx must be
available in intensive care units. Even the thorough cleaning of
clean-rooms requires 500 lx.
11
Industry & engineering
Light for innovating
Modern technologies make tough demands on cleanliness and
light Increasingly, more exacting i­ndustrial requirements are
­p aving the way for new technologies and process engineering
methods. The use of clean-rooms enables new, more e
­ ffective and
more accurate production methods. The food industry is also wak­
ing up to the benefits of clean-room ­p roduction. A growing number
of sectors of industry are carrying out research and manufacturing
in clean-rooms. These include, among others, microelectronics and
micromechanics as well as the pharmaceutical and bio­g enetic in­
dustries. Mass production is gathering pace and quality standards
are constantly being raised. Manufacture under controlled condi­
tions helps improve production quality and reduce rejects.
From operating theatre through to medical practice
A suitable CLEAN clean-room luminaire for every area
Application area
Technical requirements
Areas with extreme requirements
Operating theatres, laboratories, areas surrounding the operating theatre
(air locks)
• Installation: flush with ceiling or surface mounted
• Protection rating IP65
• Clean-room compatibility
• Resistant to cleaning agents and disinfectants
• Hygienic, easy to clean
•O perates in rooms with positive pressure and negative pressure
containment
• Easy to maintain
• Highly reliable and operationally dependable
Areas with exacting requirements
Areas surrounding the operating theatre, intensive care units, accident
and emergency wards, examination and treatment rooms, …
• Recessed installation
• Protection rating IP65 from below
• Clean-room compatibility
• Resistant to cleaning agents and disinfectants
• Glass or plastic diffuser (depending on application)
• Hygienic, easy to clean
•O perates in rooms with positive pressure and negative pressure
containment
• Easy to maintain
• Highly reliable and operationally dependable
Areas with increased requirements
Examination and treatment rooms, recovery wards, c
­ orridor and
circulation areas, administrative areas, laundries and kitchens, medical
­ entres, …
practices, health and rehabilitation c
• Recessed installation
• Increased protection
• Hygienic, easy to clean
• Highly reliable and operationally dependable
13
The solution
CLEAN SUPREME
•S urface-mounted luminaire, recessed luminaire when used in combination
with mounting frame
• Consistent IP65 protection rating
•F raunhofer IPA Certificate for clean-room compatibility in clean-rooms in
ISO Cleanliness Classes 3 to 9
•H igh-grade surface coating with anti-static effect is resistant to cleaning
agents and disinfectants
• Frameless, all-round glass diffuser
•D ependable operation with positive pressure and negative pressure
containment
• Luminaire is easy to install, and re-lamp
• ENEC mark, rugged, durable design
CLEAN ADVANCED
• Recessed luminaire, 600 and 625 modules
• Protection rating IP65, IP54 in the ceiling
•F raunhofer IPA Certificate for clean-room compatibility in clean-rooms in
ISO Cleanliness Classes 3 to 9
• High-grade surface coating is resistant to cleaning agents and disinfectants
• Diffuser made of high-grade anodised aluminium
• Version with toughened safety glass or shatterproof PMMA acrylic glass
•D ependable operation with p
­ ositive pressure and negative pressure
containment
• Luminaire is easy to install, con­v enient relamping
• ENEC mark, rugged, durable design
CLEAN CLASSIC
• Recessed luminaire, 600 and 625 modules
• Protection rating IP54, IP20 in the ceiling
• Surface coating is resistant to cleaning agents and disinfectants
• Diffuser made of anodised alu­m inium
• Version with PMMA acrylic glass
• ENEC mark, rugged, durable design
From pizzas to microchips
CLEAN can handle application-specific needs
Application area
Technical requirements
Areas with extreme requirements
Electronics, electrical engineering, micromechanics, bio­g enetics,
pharmaceutical and chemical companies, laboratory technology, genetic
engineering, food technology, extremely critical areas of food production
•
•
•
•
•
•
Installation: flush with ceiling or surface-mounted
Protection rating IP65
Clean-room compatibility
Resistant to cleaning agents and disinfectants
Hygienic, easy to clean
O perates in rooms with positive pressure and negative pressure
containment
• Easy to maintain
• Highly reliable and operationally dependable
Areas with exacting requirements
Electronics, electrical engineering, micromechanics, bio­g enetics,
pharmaceutical and chemical companies, laboratory technology, genetic
engineering, food technology, extremely critical areas of food production
• Recessed installation
• Protection rating IP65 from below
•O peration not adversely affected by vapour, heat, dust or corrosive
atmospheres
• Clean-room compatibility
• Resistant to cleaning agents and disinfectants
• Glass or plastic diffuser (shatter ­p rotection)
• Hygienic, easy to clean
• Suitable for rooms with relatively high ceilings
•O perates in rooms with positive pressure and negative pressure
containment
• Easy to maintain
• Highly reliable and operationally dependable
Areas with increased requirements
Food industry, corridor and c
­ irculation areas, laundries and large-scale
catering establishments
• Recessed installation
• Increased protection
• Operation not adversely affected by vapour, heat or dust
• Suitable for rooms with relatively high ceilings
• Version with shatter protection
• Hygienic, easy to clean
• Highly reliable and operationally dependable
15
The solution
CLEAN SUPREME
•S urface-mounted luminaire, recessed luminaire when used in
combination with mounting frame
• Consistent IP65 protection rating
•F raunhofer IPA Certificate for clean-room compatibility in clean-rooms
in ISO Cleanliness Classes 3 to 9
•H igh-grade surface coating with anti-static effect is resistant to cleaning
agents and disinfectants
• Frameless, all-round glass diffuser
•D ependable operation with p
­ ositive pressure and negative pressure
containment
• Luminaire is easy to install, a
­ nd re-lamp
• ENEC mark, rugged, durable design
CLEAN ADVANCED
• Recessed luminaire, 600 and 625 modules
• Protection rating IP65, IP54 in the ceiling
• Very strong materials, meticulous workmanship
•F raunhofer IPA Certificate for clean-room compatibility in clean-rooms
in ISO Cleanliness Classes 3 to 9
•H igh-grade surface coating is resistant to cleaning agents and
disinfectants
• Diffuser made of high-grade ­a nodised aluminium
• Version with toughened safety glass or shatterproof PMMA a
­ crylic glass
•D ependable operation with p
­ ositive pressure and negative pressure
containment
• Luminaire is easy to install, c
­ onvenient relamping
• ENEC mark, rugged, durable design
CLEAN CLASSIC
• Recessed luminaire, 600 and 625 modules
• Protection rating IP54, IP20 in the ceiling
• Very strong materials, careful workmanship
• Surface coating is resistant to cleaning agents and disinfectants
• Diffuser made of anodised alu­m inium
• Version with PMMA acrylic glass
• ENEC mark, rugged, durable design
CLEAN SUPREME
Clean-room luminaire for areas with extreme requirements
The unique feature of the top-of-the-range model in the
CLEAN product line is a c
­ ontinuous smooth safety glass
diffuser. Cleaning a luminaire does not get any simpler
than this. The 4 mm thick toughened safety glass does
not need a frame nor is it i­nterrupted by fasteners. The
­innovative magnetic fasteners combine safety with
functionality.
•A
high-quality, continuous, precision-formed foam seal makes the joint
between the diffuser and luminaire housing perfectly tight – a breather
valve inside the luminaire e
­ nsures the necessary p
­ ressure equalisation
when operating in rooms with p
­ ositive and negative pressure contain­
ment, thereby guaranteeing IP65 protection.
• T he frameless, continuous, smooth toughened safety glass diffuser is
fixed by magnetic fasteners. At a d
­ istance of just 20 cm, their magnetic
field is weaker than that of the earth and therefore has no adverse elec­
tromagnetic effects of any kind.
• A ll CLEAN surface-mounted luminaires are installed with standard
4-point fixing. The same fixing points are also used for installation flush
with the ceiling using a mounting frame. These a
­ ccessories can be used
to implement both individual l­uminaire solutions as well as continuous
row systems and right-angled configurations in suspended ceilings.
• C LEAN SUPREME, which is compatible with all standard ceiling sys­
tems, is available as a linear luminaire with 2 or 3 T16 (T5) lamps and
with LEDs.
• C ontinuous, non-ageing seals are resistant to chemicals and precisionformed to ensure a high degree of protection of the clean-room lumi­
naire, enhanced stability and underline the luminaire’s overall high quality.
• S pecial anti-static coating ­r esistant to cleaning agents and disinfectants
eliminates the attraction of dirt and dust particles.
Designs:
The Fraunhofer IPA Test Institute confirms the suitability of
CLEAN SUPREME for clean-rooms in ISO Classes 3 to 9 (according to
DIN EN ISO 14644-1) and for clean-room environments in GMP Classes
C to F (Good Manufacturing Practice) and states that:
Linear
“This lighting system is impressive thanks to its high-quality design and
the workmanship of all its components.”
17
96 lm / W (LED)
CLEAN SUPREME LED
Louvre optic
Technical data
Light sources: LED
2 sizes (LWH): 1550 x 350 x 96 mm
1250 x 350 x 96 mm
Colour rendering: Ra 90 or Ra 80
UGR: < 19 at Ra 90, < 22 at Ra 80
Luminous flux:
up to 9700 lm (Ra 80) or 8100 lm (Ra 90)
Symmetrical specular reflector optic
Colour temperature:
4000 K (intermediate white)
Models: linear version
MPO
Continuously smooth diffuser made of
safety glass with extremely simple
magnetic opening mechanism. A foam
gasket ensures a perfectly tight joint.
CLEAN ADVANCED
Clean-room luminaire for areas with exacting requirements
A cover with a high-quality anodised aluminium frame
and toughened safety glass insert is distinctive of the
mid-range CLEAN clean-room luminaire model.
If splinter protection is required, for instance in food
production facilities, a model with PMMA acrylic glass is
available as well (not for CLEAN ADVANCED LED).
•A
continuous, precision-formed foam seal between the cover and lumi­
naire housing as well as between the l­uminaire and ceiling ensures a
perfectly tight joint. Trouble-free operation in rooms with positive and
negative pressure containment systems is ensured, as is IP65 protec­
tion from below.
• Internal catch locks are used in order to prevent particles from accumu­
lating on external fastener components. The high-quality toughened
safety glass panel in an anodised a
­ luminium frame is easy to clean, and
the luminaire is opened by using a suction cup.
• T he standard prefitted mounting kit ensures extremely easy but never­
theless precise installation.
• C LEAN ADVANCED, which is compatible with all standard ceiling sys­
tems, is available as a linear luminaire with 2 or 4 lamps; the square
model is fitted with 3 or 4 lamps (T16 and TC-L) and with LEDs.
• R esistance to chemicals and non-ageing seals ensure a high degree of
protection of clean-room luminaires. Cleanly mitred corners, precisely
welded joints and precision workmanship are other signs of top quality.
• T he surface is resistant to cleaning agents and disinfectants. Smooth
transitions between glass and frame, and frame and housing make
cleaning easier.
Designs:
Square
The Fraunhofer IPA Test Institute confirms the suitability of
CLEAN ADVANCED for clean-rooms in ISO Classes 3 to 9
(according to DIN EN ISO 14644-1) and states that:
Linear
“The coating has a smooth texture, and workmanship is
­g enerally high quality.”
19
CLEAN ADVANCED LED
Louvre optic
Specifications
Light sources: LEDs
Luminous flux: 3 900 lm and 6 000 lm
Colour temperature: 3 000 K (warm white)
and 4 000 K (intermediate white)
Colour rendering: Ra 80
Models: linear and square
UGR < 19
Opal optic
Symmetrical specular reflector optic
120 lm / W (LED)
MPO
Diffuser
The special micro-prism optic ensures
both glare control in conformity with
relevant standards at shallow angles
(EN 12464) and reduced luminance at
steep angles.
CLEAN CLASSIC
Clean-room luminaire for areas with increased requirements
The classic version of the CLEAN luminaire focuses on
basic clean-room requirements such as good hygiene
and ease of cleaning. The PMMA acrylic glass panel
enclosed by a high-quality, anodised aluminium frame
ensures a high level of shatter protection as required in
the production of foodstuffs for example.
•C
ontinuous, precision-formed foam seal between the cover and lumi­
naire housing, and the luminaire and ceiling ensures a perfect joint
(protection rating IP54).
• T he diffuser, which consists of aluminium-framed PMMA acrylic glass
and a high-quality aluminium frame with smooth transitions for easy
cleaning, can be opened very quickly by using the spring-clip mecha­
nisms.
• C LEAN CLASSIC is compat­ible with all common ceiling systems and is
used as a lay-in luminaire as well as a recessed luminaire. The mounting
kit which is available as an accessory snaps into the luminaire housing
and makes recessed installation simpler.
• T he classic version designed in accordance with hygienic requirements
is available as a linear 2-lamp luminaire, a square version fitted with 3 or
4 lamps (T16 and TC-L) and an LED model.
• H igh-quality materials and meticulous workmanship ensure durability
and stability.
• T he coating of both the h
­ ousing and cover is resistant to cleaning
agents and dis­infectants.
Designs:
Square
Thanks to the levelling kit, installation ef­
fort is reduced to just a few simple steps.
Linear
21
CLEAN CLASSIC LED
Opal optic
Technical data
Light sources: LED
Colour rendering: Ra 90 or Ra 80
Luminous flux: 5000 lm
UGR: < 22
Colour temperatures: 3000 K (warm)
and 4000 K (intermediate)
Special double-safety suspended spring
clips allow to install the diffuser quickly
and without any tools. During relamping,
the diffuser is held by the spring clips.
Models: linear and square
Symmetrical specular reflector optic
The diffuser can be quickly opened using
a suction cup.
High-quality lighting
ensures process safety and reduces frequency of mistakes
Clean-rooms are built to meet exceptionally demanding
­e xpectations. They are very often used to accomplish
­d ifficult visual tasks, and great importance is therefore
attached to lighting. Surgical operations, for instance,
present the greatest challenges of all for physicians and
medical staff, particularly in terms of visual performance.
Good light ensures reliable, fast perception of important
details. Adaptation problems for the h
­ uman eye are an ad­
­ xcessive differences in
ditional challenge in lighting terms. E
illuminance levels when lines of sight switch between the
operating field and the surrounding area may result in ad­
aptation problems.
The solution is to graduate the lighting level in the room. CLEAN’s
response to the ever growing number of visual display terminals in
clean-rooms is optics that are in conformity with relevant standards
and eliminate annoying reflections on screen surfaces. The entire
CLEAN product range incorporates state-of-the-art technologies
such as LED light sources or T16 (T5) fluorescent lamps and elec­
tronic ballasts. Luminous flux and thermal performance are perfectly
matched to make CLEAN luminaires significantly more
efficient than other fluorescent fittings in clean-room ­a pplications.
Which optics are best for specific application areas?
Light in healthcare settings
Circulation areas in healthcare settings
General lighting in operating theatre
Mean E in lux
UGR
Colour rendition index (RA)
Recommended optic(s)
200 lx
22
80
Opal optic, symmetrical specular reflector optic, MPO
Louvre optic, MPO
1000 lx
19
90
Target is 2000 lx
19
90
Louvre optic, MPO
Pre-op and recovery rooms (adjacent areas)
500 to 1000 lx
19
90
Louvre optic, MPO
Intensive care units
Immediate surroundings of operating table
100 to 1000 lx
19
90
Louvre optic, MPO
Sterile rooms
300 lx
22
80
Opal optic, Symmetrical specular reflector optic, MPO
Laboratories
500 to 1000 lx
19
80/90
Louvre optic, MPO
Examination rooms (general)
500 to 1000 lx
19
90
Louvre optic, MPO
Treatment rooms (general)
300 to 500 lx
19
80/90
Louvre optic, MPO
Chemical industry: manufacture of medicaments
500 lx
22
80
Louvre optic, opal optic,
Symmetrical specular reflector optic, MPO
Chemical industry: precision measurement rooms, laboratories
500 lx
19
80
Louvre optic, MPO
Chemical industry: inspection work, rework
750 lx
19
80
Louvre optic, MPO
750 to 1000 lx
16 to 19
80
Louvre optic, MPO
Electrical industry: electronic workshops, testing, adjusting
1500 lx
16
80
Louvre optic, MPO
Metal working and processing: extra-fine assembly work
750 lx
19
80
Louvre optic, MPO
1000 lx
19
80
Louvre optic, MPO
Food industry: sorting and washing products, milling, mixing
and packing
300 lx
25
80
Louvre optic, opal optic,
Symmetrical specular reflector optic, MPO
Food industry: laboratories
500 lx
19
80
Louvre optic, MPO
Light in clean-room industry
Electrical industry: fine and extra-fine assembly work
Metal working and processing:
precision engineering and micromechanics
Food industry
500 lx
22
80
Louvre optic, opal optic,
Symmetrical specular reflector optic, MPO
Laundry and dry cleaning: washing and dry cleaning
300 lx
25
80
Louvre optic, opal optic,
Symmetrical specular reflector optic, MPO
Laundry and dry cleaning: inspection and repairs
750 lx
19
80
Louvre optic, MPO
80
Louvre optic, opal optic,
Symmetrical specular reflector optic, MPO
Food industry: production of fine foods and foods
Increased requirements
Large-scale catering premises
500 lx
22
Excerpt from EN 12464-1
23
A wide choice of optics makes it possible to coordinate
lighting quality with particular visual tasks.
Louvre optics
Our semi-matt Bivergent ® louvre optic with all-round
glare ­c ontrol in full conformity with standards and gentle
luminance transitions is recommended for demanding
activities and visual tasks. It is ideal for workstations
that involve exacting visual requirements and monitors
in the clean-room industry and hospital a
­ reas (glare
­limitation L < 1000 cd/m 2 at 65°).
Symmetrical specular reflector optics
Optimised specular reflector optics direct light precisely
where it is needed. Wide-angle beam patterns are rec­
ommended for large task areas that place tough de­
mands on illuminance.
MPO (micro-pyramidal optic)
The innovative micro-pyramidal optic (patent pending)
reduces luminance levels and ensures glare-free light.
MPO not only provides exceptionally brilliant lighting
quality, but also cuts direct and reflected glare for all
types of VDTs (glare limitation L < 1000 cd/m 2 at
65 degrees).
Opal optics
Uniform light distribution is the top priority in many are­
as such as circulation and general-purpose areas. Opal
optics provide pleasant, uniform light distribution, and
the light source remains concealed from direct view.
Surface-mounted or recessed:
CLEAN is properly equipped for either type of installation
max.
0 mm
20-6
max.
mm
-60
1.mF
axlip
pad ­p arallel
. 20mounting
to housing
CLEAN ADVANCED and CLASSIC
Recessed installation with mounting kit
max.
m
24 m
2. P
ush screw head
upwards
0 mm
20-6
max.
to automatically
flip
mounting pad out
max.
The mounting kit prefitted in the CLEAN ADVANCED
recessed luminaire and available as an accessory for the
CLEAN CLASSIC lay-in and recessed luminaire allows
installation with effortless ease.
max.
max.
0 mm
20-6
max.
max.
0 mm
20-6
max.
max.
4 mm
2
max.
Ceiling systems with concealed
­c arriers
max.
0 mm
max.
max.
max.
0 mm
Ceiling systems with sawn
cut-out
max.
0 mm
0 mm
20-6
20-6
m
24 m
128
25
25
Surface-mounted on ceiling
25
128
128
Mounting frame on bare ceiling:
The mounting frame is fixed by means of threaded rods
that are fixed to the bare ceiling. To fix ceiling panels,
there is a version with a flange (support for ceiling panel –
max.panels) or without a flange (plasterboard can
cut ceiling
0 mm
20-6
be screwed
straight onto the frame).
25
128
CLEAN SUPREME
Surface-mounted on ceiling or recessed with mounting
frame
54
0 mm
20-6
20-6
m
The luminaire is surface mounted on the ceiling by
4-point fixing as standard. The luminaire is supplied
complete with an installation kit. A mounting frame that
m
fits20-6all0 mCLEAN
SUPREME versions turns theax.surfacem
max.
54
54
0 mm The lumi­
mounted
­luminaire into a recessed l­uminaire.
20-6
naires are flush with the ceiling.
max.
0 mm
20-6
24 m
Ceiling systems with exposed
­c arriers
20-6
m
24 m
max.
max.
m
24 m
0 mm
m
0 mm
3. L
evel the luminaire
and fix
20-6
24 m
20-6
m
24 m
54
Recessed installation, mounting frame
with flange: ceiling modules or cut ceiling
panels are laid in
Ceiling systems with concealed
­ arriers and metal coffering
c
25
Installation flush with ceiling
Using mounting frame: configuring, connecting and
tightening
The mounting frame can be used to obtain flush installation
of CLEAN SUPREME as individual luminaire solutions, as
well as continuous row or rect­a ngular configurations. Dur­
ing initial fixing, the individ­u al frame modules are placed
side by side and then fastened together. Threaded rods fix
the frame to the bare ceiling. Depending on their design,
the ceiling panels are laid in or screw-­fastened. The actual
luminaire is simply fastened into the mounting frame using
the four stand­a rd fixing points. All components are fitted
and removed using normal, commercially available tools.
­Individual frames are fully ­a ssembled at the factory. Rightangled mounting frames are supplied as pre-installed com­
ponent parts.
Rectangular configuration
with mounting frames
Suitable for use in clean-rooms
Corrosion protection and white coating make the
mounting frame resistant to oil vapours, chemicals,
disinfectants and cleaning agents.
Mounting frame for
individual luminaires
Mounting frame for
continuous row systems
CLEANCLEANCLEANCLEANCLEANCLEAN
SUPREME LED
SUPREME
ADVANCED LED ADVANCED LED
ADVANCED
ADVANCED
linear linear linearsquarelinearsquare
Distribution characteristics
Wide-angle
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Installation
Surface-mounted
Recessed
Mounting frame with flange
Louvres/optics
MPO
•
Opal
•
•
Comfort louvre
•
•
•
Specular reflector optic, symmetrical
•
•
•
Dimensions
1250 x 350 x   96 mm
•
1550 x 350 x   96 mm
•
•
•
1250 x 400 x   96 mm
•
1550 x 400 x   96 mm
•
1198 x 298 x 106 mm
•
•
1498 x 298 x 106 mm
•
1248 x 310 x 106 mm
•
•
1548 x 310 x 106 mm
•
1198 x 598 x 106 mm
•
1498 x 598 x 106 mm
•
1248 x 623 x 106 mm
•
1548 x 623 x 106 mm
•
598 x 598 x 106 mm
•
623 x 623 x 106 mm
•
•
•
598 x 598 x 126 mm
•
623 x 623 x 126 mm
•
LED
3800 lm –   4800 lm / 3000 K / 4000 K / Ra 80 / Ra 90
•
•
5000 lm –   6200 lm / 3000 K / 4000 K / Ra 80 / Ra 90
•
•
8000 lm – 11000 lm / 4000 K / Ra 80 / Ra 90
•
Compact fluorescent lamps
TC-L
•
Fluorescent lamps
T16
•
•
•
27
CLEANCLEANCLEANCLEAN
CLASSIC LED
CLASSIC LED
CLASSIC
CLASSIC
linearsquarelinearsquare
Distribution characteristics
Wide-angle
•
•
•
•
•
•
•
•
•
•
Installation
Recessed
Louvres/optics
Opal
Specular reflector optic, symmetrical
•
•
•
•
Dimensions
598 x 598 x 126 mm
•
623 x 623 x 126 mm
•
1198 x 298 x 101 mm
•
•
•
1498 x 298 x 101 mm
1248 x 310 x 101 mm
•
•
•
•
1548 x 310 x 101 mm
•
LED
4600 lm / 3000 K / Ra 90
•
•
4800 lm / 4000 K / Ra 90
•
•
5000 lm / 3000 K / 4000 K / Ra 80 / Ra 90
•
•
5200 lm / 3000 K / 4000 K / Ra 80 / Ra 90
•
•
5400 lm / 3000 K / 4000 K / Ra 80 / Ra 90
•
•
5800 lm / 3000 K / 4000 K / Ra 80
•
•
Compact fluorescent lamps
TC-L
•
Fluorescent lamps
T16
•
•
28 CLEAN SUPREME
|...|Shared properties CLEAN SUPREME
•
Housing made of welded sheet
steel, with white antistatic coating
(resistant to oil vapours, chemical
substances, disinfectants and
cleaning agents)
•
Always check in advance the sui­
tability of the cleaning conditions
and cleaning agents used
Fastening mechanism: convenient
•
Institute - purity class suitable for
magnetic catch
clean rooms according to DIN EN
•
Diffuser made of 4 mm safety
ISO 14644-1 - Class 3 to 9, con­
glass
forms with rules set out in GMP
Installation: 4-point fixing using
•
(good manufacturing practice) pu­
mounting kit (included in luminaire
rity class C to F
supply)
•
Luminaire pre-wired using halo­
•
Certified according to Fraunhofer
gen-free leads
Installation CLEAN SUPREME
350
96
Symmetrical reflector
400
350
96
96
96
Comfort louvre
96
LED
400
350
LED
L
B
H
L1
B1
1250/1550
350
96
1190/1490
290
2/28 W
1250
350
96
1190
290
L1
2/54 W
1250
350
96
1190
290
28 8 8 28
31
B1
L
Possible feed-in point (luminaire)
Installation points (ceiling)
2/35 W
1550
350
96
1490
290
2/49 W
1550
350
96
1490
290
2/80 W
1550
350
96
1490
290
3/28 W
1250
400
96
1190
340
3/54 W
1250
400
96
1190
340
3/35 W
1550
400
96
1490
340
3/49 W
1550
400
96
1490
340
3/80 W
1550
400
96
1490
340
CLEAN S-MP SUPREME LED micropyramidal optic
L/W/H
kg
Order no.
LED luminaires
dimmable Dali only
IP65 IK 04 LED10000-940 L1550
1550/350/96
20,5
42 183 022
IP65 IK 04 LED11000-840 L1550
1550/350/96
20,5
42 182 676
IP65 IK04 LED8000-940 L1250
1250/350/96
16,8
42 183 021
IP65 IK04 LED9000-840 L1250
1250/350/96
16,8
42 182 675
Accessory
Suction cup 20 935 455
halogen
0,5 Nm
150
300
CLEAN S-MP LED10000-940 L1550
450
•
|...|
•
LED cleanroom luminaire for maxi­
mum requirements
Specially developed microprismatic
•
optic delivers high efficiency and
standards-compliant glare-control
(UGR < 19 with colour rendering Ra
> 90)
LED service life: 50000 h before
•
luminous flux is reduced to 90 % of
the initial value
Colour rendering: Ra > 80 or
•
Ra > 90
•
Farbtemperatur 4000 K (neutral­
weiß)
•
Chromaticity tolerance between
multiple luminaires of up to 4 Ma­
cAdam ellipses
•
Luminaires also available as emer­
gency lighting versions on request
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
LOR
100%
CLEAN SUPREME
29
CLEAN S-C SUPREME Comfort louvre
•
|...|
Semi-matt Bivergenz® optic; glare
•
limitation for DSE L < 1000 cd/m²
at 65 degrees
W ith electronic ballast for T16
•
lamps
•
Luminaires are also available on re­
quest in dimmable version or as
emergency lighting model
L/W/H
kg
Order no.
Luminaire with electr. ballast with glass diffuser, 2-lamp
electronic
2/28 W T16 IP65 IK04 1250/350/96
12,1
42 173 951
2/35 W T16 IP65 IK 04 1550/350/96
15,1
42 173 952
2/49 W T16 IP65 IK04 1550/350/96
15,1
42 173 953
2/54 W T16 IP65 IK 04 1250/350/96
12,1
42 159 466
2/80 W T16 IP65 IK04 1550/350/96
15,1
42 159 468
Luminaire with electr. ballast with glass diffuser, 3-lamp
3/80 W T16 IP65 IK04 1550/400/96
21,4
electronic
42 159 470
Accessory
Suction cup 20 935 455
halogen
960 °C
T16
0,5 Nm
100
200
300
CLEAN S-C 2/28W T16 EVG ESG
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <16 axial <16
LOR
68%
CLEAN S-R SUPREME reflector symmetrical
L/W/H
kg
Luminaire with electr. ballast with glass diffuser, 2-lamp
IP65 IK 04 2/28 W T16
1250/350/96
IP65 IK 04 2/35 W T16
1550/350/96
IP65 IK 04 2/49 W T16
1550/350/96
2/54 W T16 IP65 IK 04 1250/350/96
2/80 W T16 IP65 IK04 1550/350/96
Luminaire with electr. ballast with glass diffuser, 3-lamp
IP65 IK 04 3/28 W T16
1250/400/96
IP65 IK 04 3/35 W T16
1550/400/96
IP65 IK 04 3/49 W T16
1550/400/96
3/54 W T16 IP65 IK04 1250/400/96
3/80 W T16 IP65 IK04 1550/400/96
12,5
15,7
15,7
12,5
15,7
17,5
21,4
21,4
17,5
21,4
Order no.
electronic
42 173 957
42 173 958
42 173 959
42 159 467
42 173 960
electronic
42 173 961
42 173 963
42 173 964
42 173 962
42 173 965
Accessory
Suction cup 20 935 455
halogen
960 °C
T16
0,5 Nm
100
200
CLEAN S-R 3/28W T16 EVG ESG
300
•
|...|
•
Specular reflector optic made of se­
mi-matt high-purity aluminium, wi­
de-angle distribution, symmetrical,
surface coated with highly reflective
material
•
W ith electronic ballast for T16
lamps
•
Luminaires also available as emer­
gency lighting versions on request
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
75%
30 CLEAN SUPREME mounting surround
Installation CLEAN SUPREME mounting frame
CLEAN SUPREME 2-lamp / 28 – 54, LED 8 000, LED 9 000
L
B
X
Y
X1
Y1
L1
➀ Frame for individual installation
CLEAN S EREZ(S)
1359
460
1129,5
393
–
–
–
➁ Frame for initial luminaire
CLEAN S ERA(S)
1305
460
1190,3
393
–
–
–
➂ Frame for central luminaire
CLEAN S ERM(S)
1251
460
1251,0
393
–
–
–
➃ Frame for end luminaire
CLEAN S ERE(S)
1305
460
1190,3
393
–
–
–
➄ Frame for right corner
CLEAN S ERR(S)
1305
460
1190,3
393
1190,8
432,7
1657
➅ Frame for left corner
CLEAN S ERL(S)
1305
460
1190,3
393
1190,8
432,7
1657
CLEAN SUPREME 2-lamp / 35 – 80, LED 10 000, LED 11 000
➀ Frame for individual installation
CLEAN S EREZ(S)
1659
460
1429,5
393
–
–
–
➁ Frame for initial luminaire
CLEAN S ERA(S)
1605
460
1490,3
393
–
–
–
➂ Frame for central luminaire
CLEAN S ERM(S)
1551
460
1551,0
393
–
–
–
➃ Frame for end luminaire
CLEAN S ERE(S)
1605
460
1490,3
393
–
–
–
➄ Frame for right corner
CLEAN S ERR(S)
1605
460
1490,3
393
1490,8
432,7
1957
➅ Frame for left corner
CLEAN S ERL(S)
1605
460
1490,3
393
1490,8
432,7
1957
➀ Frame for individual installation
CLEAN S EREZ(S)
1359
510
1129,5
443
–
–
–
➁ Frame for initial luminaire
CLEAN S ERA(S)
1305
510
1190,3
443
–
–
–
➂ Frame for central luminaire
CLEAN S ERM(S)
1251
510
1251,0
443
–
–
–
➃ Frame for end luminaire
CLEAN S ERE(S)
1305
510
1190,3
443
–
–
–
➄ Frame for right corner
CLEAN S ERR(S)
1305
510
1190,3
443
1190,8
482,7
1707
➅ Frame for left corner
CLEAN S ERL(S)
1305
510
1190,3
443
1190,8
482,7
1707
➀ Frame for individual installation
CLEAN S EREZ(S)
1659
510
1429,5
443
–
–
–
➁ Frame for initial luminaire
CLEAN S ERA(S)
1605
510
1490,3
443
–
–
–
➂ Frame for central luminaire
CLEAN S ERM(S)
1551
510
1551,0
443
–
–
–
➃ Frame for end luminaire
CLEAN S ERE(S)
1605
510
1490,3
443
–
–
–
➄ Frame for right corner
CLEAN S ERR(S)
1605
510
1490,3
443
1490,8
482,7
2007
➅ Frame for left corner
CLEAN S ERL(S)
1605
510
1490,3
443
1490,8
482,7
2007
CLEAN SUPREME 3-lamp / 28 – 54
CLEAN SUPREME 3-lamp / 35 – 80
Y
B
Y
X
X
L
L
Y
X
X
L
L
➄ Frame for right corner / CLEAN S ERR(S)
➅ Frame for left corner / CLEAN S ERL(S)
L1
L1
X1
X
X
L
Y1
B
X1
Y
Y1
B
➃ Frame for end luminaire / CLEAN S ERE(S)
Y
B
➂ Frame for central luminaire / CLEAN S ERM(S)
B
Y
X, Y …fastening points
B, L …external dimensions
Calculation of ceiling cut-out dimensions for frame modules without web:
Total of frame length dimensions or frame width dimensions MINUS 94 mm
L
B
➀ Frame for individual installation / CLEAN S EREZ(S) ➁ Frame for initial luminaire / CLEAN S ERA(S)
CLEAN SUPREME mounting surround
31
CLEAN SUPREME mounting frame with flange
•
Suitable for installation of all CLEAN
SUPREME luminaires flush with cei­
ling
High-grade aluminium, coated
•
white
•
Resistant to oil vapours, chemicals,
disinfectants and cleaning agents
•
Special coatings are available for
stricter requirements (e.g. in food­
stuffs industry and meat & sausage
processing). (Please discuss requi­
rements specifically)
Always check in advance the suita­
•
bility of the cleaning conditions and
cleaning agents used
•
Easy installation and dismantling
Mounting frame fixed to bare ceiling
•
by means of threaded rods (not in­
cluded in supply)
•
Standard luminaire can be fixed in
frame w/o additional accessories
L/W/H
kg
Order no.
Mounting frame for CLEAN SUPREME 2/28–54 and CLEAN SUPREME LED9000 / LED8000
CLEAN S ERAS 2/28-54 for initial luminaire 1305/460/129
5,2 22 157 616
CLEAN S ERES 2/28-54 for end luminaire 1305/460/129
3,8 22 157 618
CLEAN S EREZS 2/28-54 for individual luminaire 1359/460/129
5,4 22 157 615
CLEAN S ERLS 2/28-54 for left corner 1657/1305/129
7,8 22 157 620
CLEAN S ERMS 2/28-54 for central luminaire 1251/460/129
3,5 22 157 617
CLEAN S ERRS 2/28-54 for right corner 1657/1305/129
7,8 22 157 619
Mounting frame for CLEAN SUPREME 2/35-80 and CLEAN SUPREME LED11000 / LED10000
CLEAN S ERAS 2/35-80 for initial luminaire 1605/460/129
5,7 22 157 628
CLEAN S ERES 2/35-80 for end luminaire 1605/460/129
4,2 22 157 630
CLEAN S EREZS 2/35-80 for individual luminaire 1659/460/129
5,9 22 157 627
CLEAN S ERLS 2/35-80 for left corner 1957/1605/129
8,8 22 157 632
CLEAN S ERMS 2/35-80 for central luminaire 1551/460/129
4,0 22 157 629
CLEAN S ERRS 2/35-80 for right corner 1957/1605/129
8,8 22 157 631
Mounting frame for CLEAN SUPREME 3/28-54
CLEAN S ERAS 3/28-54 for initial luminaire CLEAN S ERES 3/28-54 for end luminaire CLEAN S EREZS 3/28-54 for individual luminaire CLEAN S ERLS 3/28-54 for left corner CLEAN S ERMS 3/28-54 for central luminaire CLEAN S ERRS 3/28-54 for right corner 1305/510/129
1305/510/129
1359/510/129
1707/1305/129
1251/510/129
1707/1305/129
5,2
3,8
5,5
7,8
3,5
7,8
22 157 640
22 157 642
22 157 639
22 157 644
22 157 641
22 157 643
Mounting frame for CLEAN SUPREME 3/35-80
CLEAN S ERAS 3/35-80 for initial luminaire CLEAN S ERES 3/35-80 for end luminaire CLEAN S EREZS 3/35-80 for individual luminaire CLEAN S ERLS 3/35-80 for left corner CLEAN S ERMS 3/35-80 for central luminaire CLEAN S ERRS 3/35-80 for right corner 1605/510/129
1605/510/129
1659/510/129
2007/1605/129
1551/510/129
2007/1605/129
5,7
4,3
6,0
8,8
4,0
8,8
22 157 652
22 157 654
22 157 651
22 157 656
22 157 653
22 157 655
32 CLEAN ADVANCED
|...|Shared properties CLEAN ADVANCED
•
Housing made of welded sheet
•
Diffuser made of anodised alumi­ •
Luminaire pre-wired using halo­
steel, with white coating (resistant
nium section with 4 mm safety
gen-free leads
to oil vapours, chemical substan­
glass insert
Top inspection opening for acces­
•
ces, disinfectants and cleaning
•
Installation: 4-point fixing using
sible ceilings available on request
agents)
mounting kit (included in luminaire •
Luminaires are also available on
•
Always check in advance the sui­
supply)
request in dimmable version or as
tability of the cleaning conditions •
Certified according to Fraunhofer
emergency lighting model
and cleaning agents used
Institute - purity class suitable for
Fastening mechanism: internal
•
clean rooms according to DIN EN
catch locks
ISO 14644-1 - Class 3 to 9
Installation CLEAN ADVANCED
Linear
Module 600
B
B
B
H
1198
298
106
1184
277
598
598
106
584
577
2/28, 2/54 W
1198
298
106
1184
277
2/35, 2/49, 2/80 W
1498
298
106
1484
277
4/28, 4/54 W
1198
598
106
1184
577
4/35, 4/49, 4/80 W
1498
598
106
1484
577
598
598
106
584
577
598
598
126
584
577
L
B
H
1248
310
106
1234
289
623
623
106
609
602
2/28, 2/54 W
1248
310
106
1234
289
2/35, 2/49, 2/80 W
1548
310
106
1534
289
4/28, 2/54 W
1248
623
106
1234
602
4/35, 4/49, 4/80 W
1548
623
106
1534
602
623
623
106
609
602
623
623
126
609
602
LED
20-66
106
20-66
T16
106
20-66
106
20-66
Symmetrical
minimum dimensions
L/DA
B/DA
L
B
B
Comfort louvre
20-66
T16
106
106
B
B
106
T16
106
LED
20-66
106
LED
20-66
Opal
20-66
LED
B
B
L
4/14, 4/24 W
TC-L
28 40 40 40
50
3/40, 3/55 W
Module 625
Possible feed-in point (luminaire)
Square
minimum dimensions
L/DA
B/DA
LED
Opal
106
20-66
126
20-66
106
T16
TC-L
B
B
20-66
LED
B
B
28 27 27 27
20-66
106
126
20-66
Comfort louvre
4/14, 4/24 W
TC-L
B
3/40, 3/55 W
B
20-66
106
126
20-66
62
Symmetrical
Possible feed-in point (luminaire)
T16
B
CLEAN ADVANCED
33
CLEAN A-MP ADVANCED LED linear
•
|...|
Specially developed microprismatic
•
optic delivers high efficiency and
standards-compliant glare-control
(UGR < 19 with colour rendering Ra
> 90)
LED service life: 50000 h before lu­
•
minous flux is reduced to 90 % of
the initial value
Colour rendering: Ra > 80 or Ra >
•
90
•
Colour temperature 4000 K, optio­
nally 3000 K
•
Chromaticity tolerance between
multiple luminaires of up to 4 Ma­
cAdam ellipses
L/W/H
Order no.
kg
LED luminaire for module 625
dimmable Dali only
IK07 LED3800-830
1248/310/106
12,0
42 182 865
IK 07 LED4000-840
1248/310/106
12,0
42 182 683
IK07 LED4800-930
1248/310/106
12,0
42 183 020
IK 07 LED4800-940
1248/310/106
12,0
42 183 019
IK07 LED5800-830
1248/310/106
12,0
42 182 867
IK 07 LED6000-840
1248/310/106
12,0
42 182 679
LED luminaire for module 600
dimmable Dali only
IK 07 LED3800-830
1198/298/106
12,0
42 182 861
IK 07 LED4000-840
1198/298/106
12,0
42 182 681
IK 07 LED4600-940
1198/298/106
12,0
42 183 015
IK 07 LED4800-930
1198/298/106
12,0
42 183 016
IK 07 LED5800-830
1198/298/106
12,0
42 182 863
IK 07 LED6000-840
1198/298/106
12,0
42 182 677
Accessory
Suction cup 20 935 455
halogen
2 Nm
150
cd/klm
300
CLEAN A-MP LED4000-840 M600L
450
150
300
450
106
20-66
CLEAN A-MP LED4000-840 M625L
cd/klm
B
M600 L: L=1198 mm, B=298 mm
M625 L: L=1248 mm, B=310 mm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
LOR
100%
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
LOR
100%
CLEAN A-MP ADVANCED LED square
L/W/H
Order no.
kg
LED luminaire for module 625
dimmable Dali only
IK07 LED3800-830
623/623/106
12,0
42 182 864
IK07 LED4000-840
623/623/106
12,0
42 182 684
IK07 LED5800-830
623/623/106
12,0
42 182 866
IK07 LED5800-930
623/623/106
12,0
42 183 018
IK07 LED6000-840
623/623/106
12,0
42 182 680
IK07 LED6200-940
623/623/106
12,0
42 183 017
LED luminaire for module 600
dimmable Dali only
IK07 LED3800-830
598/598/106
12,0
42 182 860
IK07 LED4000-840
598/598/106
12,0
42 182 682
IK07 LED5800-830
598/598/106
12,0
42 182 862
IK07 LED5800-930
598/598/106
12,0
42 183 014
IK07 LED6000-840
598/598/106
12,0
42 182 678
IK07 LED6200-940
598/598/106
12,0
42 183 013
Accessory
Suction cup 20 935 455
halogen
2 Nm
150
cd/klm
300
CLEAN A-MP LED4000-840 M600Q
450
150
300
450
20-66
CLEAN A-MP LED4000-840 M625Q
106
•
|...|
•
Specially developed microprismatic
optic delivers high efficiency and
standards-compliant glare-control
(UGR < 19 with colour rendering Ra
> 90)
•
LED service life: 50000 h before lu­
minous flux is reduced to 90 % of
the initial value
•
Colour rendering: Ra > 80 or Ra >
90
•
Colour temperature 4000 K, optio­
nally 3000 K
•
Chromaticity tolerance between
multiple luminaires of up to 4 Ma­
cAdam ellipses
cd/klm
B
M600 Q: L=598 mm, B=598 mm
M625 Q: L=623 mm, B=623 mm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
LOR
100%
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
LOR
100%
34 CLEAN ADVANCED
CLEAN A-O ADVANCED opal linear
•
|...|
Diffuser made of tempered safety
•
glass, with internal diffuse-distributi­
on acrylic glass panel, outside easy
to clean
•
W ith electronic ballast for T16
lamps
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with glass diffuser
IK07 2/28 W T16
1248/310/106
IK 07 2/35 W T16
1548/310/106
IK07 2/49 W T16
1548/310/106
IK 07 2/54 W T16
1248/310/106
IK07 2/80 W T16
1548/310/106
Luminaire with electr. ballast in module 600 with glass diffuser
IK07 2/28 W T16
1198/298/106
IK07 2/35 W T16
1498/298/106
IK07 2/49 W T16
1498/298/106
IK07 2/54 W T16
1198/298/106
IK07 2/80 W T16
1498/298/106
IK07 4/35 W T16
1498/598/106
IK07 4/54 W T16
1198/598/106
electronic
42 159 564
42 159 566
42 159 567
42 159 565
42 159 568
11,9
15,0
15,0
11,9
15,0
electronic
42 159 519
42 159 521
42 159 522
42 159 520
42 159 523
42 159 526
42 159 525
10,0
12,5
12,5
10,0
12,5
22,8
18,5
Accessory
Suction cup 20 935 455
halogen
960 °C
T16
LOR
48%
60
120
180
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <22
2 Nm
CLEAN A-O 2/28W T16 EVG M600 ESG
cd/klm
60
120
180
CLEAN A-O 2/28W T16 EVG M625 ESG
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
47%
CLEAN A-O ADVANCED opal square
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with glass diffuser
IK 07 3/40 W TC-L
623/623/126
IK 07 3/55 W TC-L
623/623/126
IK07 4/14 W T16
623/623/106
IK07 4/24 W T16
623/623/106
Luminaire with electr. ballast in module 600 with glass diffuser
IK 07 3/40 W TC-L
598/598/126
IK 07 3/55 W TC-L
598/598/126
IK07 4/14 W T16
598/598/106
IK07 4/24 W T16
598/598/106
electronic
42 159 576
42 159 577
42 159 574
42 159 575
12,5
12,5
16,8
16,8
electronic
42 159 531
42 159 532
42 159 529
42 159 530
10,4
10,4
13,4
13,4
Accessory
Suction cup 20 935 455
halogen
T16
2 Nm
LOR
52%
60
120
CLEAN A-O 4/24W T16 EVG M600 ESG
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
960 °C
TC-L
180
60
120
CLEAN A-O 4/24W T16 EVG M625 ESG
180
•
|...|
•
Diffuser made of tempered safety
glass, with internal diffuse-distributi­
on acrylic glass panel, outside easy
to clean
W ith electronic ballast for T16 or
•
TC-L lamps
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
51%
CLEAN ADVANCED
35
CLEAN A-C ADVANCED Comfort louvre linear
•
|...|
Semi-matt Bivergenz® optic; glare
•
limitation for DSE L < 1000 cd/m²
at 65 degrees
W ith electronic ballast for T16
•
lamps
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with glass diffuser
IK07 2/28 W T16
1248/310/106
11,9
IK 07 2/35 W T16
1548/310/106
15,0
IK07 2/49 W T16
1548/310/106
15,0
IK 07 2/54 W T16
1248/310/106
11,9
IK07 2/80 W T16
1548/310/106
15,0
IK 07 4/35 W T16
1548/623/106
27,4
electronic
42 159 578
42 159 580
42 159 581
42 159 579
42 159 582
42 159 585
Luminaire with electr. ballast in module 600 with glass diffuser
IK07 2/28 W T16
1198/298/106
10,0
IK07 2/35 W T16
1498/298/106
12,5
IK07 2/49 W T16
1498/298/106
12,5
IK07 2/54 W T16
1198/298/106
10,0
IK07 2/80 W T16
1498/298/106
12,5
IK07 4/35 W T16
1498/598/106
22,8
IK07 4/49 W T16
1498/598/106
22,8
IK07 4/80 W T16
1498/598/106
22,8
electronic
42 159 533
42 159 534
42 159 535
42 159 471
42 159 473
42 159 537
42 159 538
42 159 475
Accessory
Suction cup 20 935 455
halogen
960 °C
T16
LOR
68%
100
200
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <16 axial <16
2 Nm
CLEAN A-C 2/28W T16 EVG M600 ESG
300
100
200
300
CLEAN A-C 2/28W T16 EVG M625 ESG
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <16 axial <16
LOR
67%
CLEAN A-C ADVANCED Comfort louvre square
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with glass diffuser
IK 07 3/40 W TC-L
623/623/126
IK 07 3/55 W TC-L
623/623/126
IK07 4/14 W T16
623/623/106
IK 07 4/24 W T16
623/623/106
electronic
42 159 590
42 159 591
42 159 588
42 159 589
12,5
12,5
16,8
16,8
Luminaire with electr. ballast in module 600 with glass diffuser
IK 07 3/40 W TC-L
598/598/126
10,4
IK 07 3/55 W TC-L
598/598/126
10,4
IK07 4/14 W T16
598/598/106
13,4
IK07 4/24 W T16
598/598/106
13,4
electronic
42 159 540
42 159 477
42 159 539
42 159 476
Accessory
Suction cup 20 935 455
halogen
T16
2 Nm
LOR
65%
100
200
CLEAN A-C 4/24W T16 EVG M600 ESG
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <16
960 °C
TC-L
300
100
200
CLEAN A-C 4/24W T16 EVG M625 ESG
300
•
|...|
•
Semi-matt Bivergenz® optic; glare
limitation for DSE L < 1000 cd/m²
at 65 degrees
•
W ith electronic ballast for T16 or
TC-L lamps
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
LOR
64%
36 CLEAN ADVANCED
CLEAN A-R ADVANCED reflector symmetrical linear
•
|...|
Specular reflector optic made of se­
•
mi-matt high-purity aluminium, wi­
de-angle distribution, symmetrical,
surface coated with highly reflective
material
W ith electronic ballast for T16
•
lamps
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with glass diffuser
IK07 2/28 W T16
1248/310/106
11,9
IK 07 2/35 W T16
1548/310/106
15,0
IK07 2/49 W T16
1548/310/106
15,0
IK 07 2/54 W T16
1248/310/106
11,9
IK07 2/80 W T16
1548/310/106
15,0
IK 07 4/28 W T16
1248/623/106
22,2
IK 07 4/35 W T16
1548/623/106
27,4
IK 07 4/49 W T16
1548/623/106
27,4
electronic
42 159 592
42 159 594
42 159 595
42 159 593
42 159 596
42 159 597
42 159 599
42 173 976
Luminaire with electr. ballast in module 600 with glass diffuser
IK07 2/28 W T16
1198/298/106
10,0
IK07 2/35 W T16
1498/298/106
12,5
IK07 2/49 W T16
1498/298/106
12,5
IK07 2/54 W T16
1198/298/106
10,0
IK07 2/80 W T16
1498/298/106
12,5
IK 07 4/28 W T16
1198/598/106
18,5
IK 07 4/35 W T16
1498/598/106
22,8
IK 07 4/49 W T16
1498/598/106
22,8
electronic
42 159 541
42 159 542
42 159 543
42 159 472
42 159 544
42 159 545
42 159 547
42 159 548
Accessory
Suction cup 20 935 455
halogen
960 °C
T16
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
LOR
79%
100
cd/klm
200
CLEAN A-R 4/28W T16 EVG M600 ESG
300
100
200
300
CLEAN A-R 4/28W T16 EVG M625 ESG
2 Nm
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <22
LOR
78%
CLEAN A-R ADVANCED reflector symmetrical square
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with glass diffuser
IK 07 3/40 W TC-L
623/623/126
12,5
IK 07 3/55 W TC-L
623/623/126
12,5
IK07 4/14 W T16
623/623/106
16,8
IK 07 4/24 W T16
623/623/106
16,8
electronic
42 173 980
42 173 981
42 173 978
42 173 979
Luminaire with electr. ballast in module 600 with glass diffuser
IK 07 3/40 W TC-L
598/598/126
10,4
IK 07 3/55 W TC-L
598/598/126
10,4
IK07 4/14 W T16
598/598/106
13,4
IK07 4/24 W T16
598/598/106
13,4
electronic
42 159 552
42 159 553
42 159 550
42 159 551
Accessory
Suction cup 20 935 455
halogen
T16
2 Nm
LOR
72%
100
200
CLEAN A-R 4/24W T16 EVG M600 ESG
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
960 °C
TC-L
300
100
200
CLEAN A-R 4/24W T16 EVG M625 ESG
300
•
|...|
•
Specular reflector optic made of se­
mi-matt high-purity aluminium, wi­
de-angle distribution, symmetrical,
surface coated with highly reflective
material
•
W ith electronic ballast for T16 or
TC-L lamps
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
72%
CLEAN CLASSIC
37
|...|Shared properties CLEAN CLASSIC
•
Housing made of welded sheet
and cleaning agents used
steel, with white coating (resistant •
Fastening mechanism: turn lock
to oil vapours, chemical substan­
fastener
ces, disinfectants and cleaning
•
Diffuser made of anodised alumi­
agents)
nium section with 3 mm PMMA
•
Always check in advance the sui­
panel insert
tability of the cleaning conditions •
Installation: 4-point fixing using
mounting kit
•
Top inspection opening for acces­
sible ceilings available on request
•
Luminaire pre-wired using halo­
gen-free leads
Installation CLEAN CLASSIC
Linear
Module 600
Symmetrical
101
101
20-66
T16
20-66
Opal
B
45
B
60 40 40 40
L
Possible feed-in point (luminaire)
minimum dimensions
L/DA
B/DA
L
B
H
LED
1198
298
101
1176
277
2/28 W
1198
298
101
1176
277
2/54 W
1198
298
101
1176
277
2/35 W
1498
298
101
1476
277
2/49 W
1498
298
101
1476
277
2/80 W
1498
298
101
1476
277
LED
598
598
126
577
577
4/14 W
598
598
126
577
577
4/24 W
598
598
126
577
577
3/40 W TC-L
598
598
126
577
577
3/55 W TC-L
598
598
126
577
577
L
B
H
LED
1248
310
101
1226
289
2/28 W
1248
310
101
1226
289
2/54 W
1248
310
101
1226
289
2/35 W
1548
310
101
1526
289
2/49 W
1548
310
101
1526
289
2/80 W
1548
310
101
1526
289
LED
623
623
126
602
602
4/14 W
623
623
126
602
602
4/24 W
623
623
126
602
602
3/40 W TC-L
623
623
126
602
602
3/55 W TC-L
623
623
126
602
602
Square
Module 625
Symmetrical
Opal
B
B
TC-L
20-66
126
20-66
126
126
126
20-66
T16
20-66
TC-L
B
B
T16
44 40 40 40
210
48 40 40 40
minimum dimensions
L/DA
B/DA
Possible feed-in point (luminaire)
CLEAN C-O CLASSIC LED linear
L/W/H
LED luminaire for module 600
LED4600-930 LED4800-940 LED5000-830 LED5000-840 dimmable Dali only
1198/298/101
42 183 189
1198/298/101
42 183 187
1198/298/101
42 183 181
1198/298/101
42 183 179
LED luminaire for module 625
LED4600-930
LED4800-940 LED5400-830 LED5400-840 dimmable Dali only
1248/310/101
42 183 190
1248/310/101
42 183 188
1248/310/101
42 183 182
1248/310/101
42 183 180
kg
Accessory
Ceiling fixing kit Order no.
22 062 229
Please order fixing kit separately.
halogen
IK 08
5 Nm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
100%
100
cd/klm
200
CLEAN C-O LED5000-840 M600L
300
100
200
CLEAN C-O LED5400-840 M625L
300
•
|...|
•
Colour rendering index: Ra > 80,
optional Ra > 90
•
Colour temperature 4000 K, optio­
nally 3000 K
•
Chromaticity tolerance between
multiple luminaires of up to 3 Ma­
cAdam ellipses
•
LED service life: 50000 h before lu­
minous flux is reduced to 90 % of
the initial value
•
Diffuse distribution PMMA panel for
high glare reduction (UGR < 22)
•
Luminaires also available as emer­
gency lighting versions on request
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
100%
38 CLEAN CLASSIC
CLEAN C-O CLASSIC LED square
L/W/H
Order no.
kg
LED luminaire for module 600
dimmable Dali only
LED5000-930 598/598/126
42 183 185
LED5200-830 598/598/126
42 183 177
LED5200-840 598/598/126
42 183 175
LED5200-940 598/598/126
42 183 183
LED luminaire for module 625
dimmable Dali only
LED5000-930
623/623/126
42 183 186
LED5200-940 623/623/126
42 183 184
LED5800-830 623/623/126
42 183 178
LED5800-840 623/623/126
6,6
42 183 176
Accessory
Ceiling fixing kit 22 062 229
Please order fixing kit separately.
halogen
IK 08
5 Nm
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
100%
100
CLEAN C-O LED5200-840 M600Q
300
100
200
300
CLEAN C-O LED5800-840 M625Q
200
•
|...|
Colour rendering index: Ra > 80,
•
optional Ra > 90
•
Colour temperature 4000 K, optio­
nally 3000 K
•
Chromaticity tolerance between
multiple luminaires of up to 3 Ma­
cAdam ellipses
LED service life: 50000 h before lu­
•
minous flux is reduced to 90 % of
the initial value
Diffuse distribution PMMA panel for
•
high glare reduction (UGR < 22)
Luminaires also available as emer­
•
gency lighting versions on request
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
100%
CLEAN C-O CLASSIC opal linear
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with PMMA diffuser
2/28 W T16 1248/310/101
2/35 W T16 1548/310/101
2/49 W T16 1548/310/101
2/54 W T16 1248/310/101
2/80 W T16 1548/310/101
Luminaire with electr. ballast in module 600 with PMMA diffuser
2/28 W T16 1198/298/101
2/35 W T16 1498/298/101
2/49 W T16 1498/298/101
2/54 W T16 1198/298/101
2/80 W T16 1498/298/101
6,6
8,2
8,2
6,6
8,2
5,5
6,9
6,9
5,5
6,9
electronic
42 173 993
42 159 491
42 159 492
42 159 490
42 159 493
electronic
42 173 992
42 159 484
42 159 485
42 159 483
42 159 486
Accessory
Ceiling fixing kit 22 062 229
Please order mounting kit separately.
halogen
IK 08
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
64%
60
cd/klm
120
CLEAN C-O 2/28W T16 EVG M600 PM
180
60
120
5 Nm
T16
CLEAN C-O 2/28W T16 EVG M625 PM
180
•
|...|
•
Translucent, diffuse-distribution ac­
rylic glass diffuser, outside easy to
clean
W ith electronic ballast for T16
•
lamps
•
Luminaires are also available on re­
quest in dimmable version or as
emergency lighting model
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
63%
CLEAN CLASSIC
39
CLEAN C-O CLASSIC opal square
•
|...|
Translucent, diffuse-distribution ac­
•
rylic glass diffuser, outside easy to
clean
W ith electronic ballast for T16 or
•
TC-L lamps
Luminaires are also available on re­
•
quest in dimmable version or as
emergency lighting model
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with PMMA diffuser electronic
3/40 W TC-L 623/623/126
6,3
42 159 496
3/55 W TC-L 623/623/126
6,3
42 159 497
4/14 W T16 623/623/126
6,4
42 159 494
4/24 W T16 623/623/126
6,4
42 159 495
Luminaire with electr. ballast in module 600 with PMMA diffuser electronic
3/40 W TC-L 598/598/126
5,2
42 159 488
3/55 W TC-L 598/598/126
5,2
42 159 489
4/14 W T16 598/598/126
5,3
42 159 480
4/24 W T16 598/598/126
5,3
42 159 487
Accessory
Ceiling fixing kit 22 062 229
Please order mounting kit separately.
halogen
T16
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
5 Nm
TC-L
LOR
60%
cd/klm
60
180
CLEAN C-O 4/24W T16 EVG M600 PM
cd/klm
60
120
180
CLEAN C-O 4/24W T16 EVG M625 PM
120
IK 08
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <22 axial <22
LOR
60%
CLEAN C-R CLASSIC reflector symmetrical linear
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with PMMA diffuser electronic
2/28 W T16
1248/310/101
6,5
42 173 995
2/35 W T16
1548/310/101
8,2
42 159 505
2/49 W T16
1548/310/101
8,2
42 159 506
2/54 W T16 1248/310/101
6,5
42 159 504
2/80 W T16 1548/310/101
8,2
42 159 507
Luminaire with electr. ballast in module 600 with PMMA diffuser electronic
2/28 W T16
1198/298/101
5,4
42 173 994
2/35 W T16
1498/298/101
6,8
42 159 499
2/49 W T16
1498/298/101
6,8
42 159 500
2/54 W T16 1198/298/101
5,4
42 159 498
2/80 W T16 1498/298/101
6,8
42 159 479
Accessory
Ceiling fixing kit 22 062 229
Please order mounting kit separately.
halogen
IK 08
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <22
LOR
86%
100
cd/klm
200
CLEAN C-R 2/28W T16 EVG M600 PM
300
100
200
5 Nm
T16
CLEAN C-R 2/28W T16 EVG M625 PM
300
•
|...|
•
Specular reflector optic made of se­
mi-matt high-purity aluminium, wi­
de-angle distribution, symmetrical,
surface coated with highly reflective
material
•
W ith electronic ballast for T16
lamps
Luminaires are also available on re­
•
quest in dimmable version or as
emergency lighting model
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <22
LOR
85%
40 CLEAN CLASSIC
CLEAN C-R CLASSIC reflector symmetrical square
L/W/H
Order no.
kg
Luminaire with electr. ballast in module 625 with PMMA diffuser
3/40 W TC-L 623/623/126
6,5
3/55 W TC-L 623/623/126
6,5
4/14 W T16 623/623/126
6,6
4/24 W T16 623/623/126
6,6
Luminaire with electr. ballast in module 600 with PMMA diffuser
3/40 W TC-L 598/598/126
3/55 W TC-L 598/598/126
4/14 W T16 598/598/126
4/24 W T16 598/598/126
electronic
42 159 510
42 159 511
42 159 508
42 159 509
electronic
42 159 503
42 159 481
42 159 501
42 159 502
5,5
5,5
5,6
5,5
Accessory
Ceiling fixing kit 22 062 229
Please order mounting kit separately.
halogen
T16
LOR
75%
100
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
5 Nm
TC-L
CLEAN C-R 4/24W T16 EVG M600 PM
300
100
200
CLEAN C-R 4/24W T16 EVG M625 PM
200
IK 08
300
•
|...|
Specular reflector optic made of se­
•
mi-matt high-purity aluminium, wi­
de-angle distribution, symmetrical,
surface coated with highly reflective
material
W ith electronic ballast for T16 or
•
TC-L lamps
Luminaires are also available on re­
•
quest in dimmable version or as
emergency lighting model
cd/klm
UGR (X = 4 H, Y = 8 H, S = 0.25 H)
transversal <19 axial <19
LOR
74%
41
Montavit GmbH, Absam | AT
LIGHT
FOR
OFFICES
AND
COMMUNICATION
zumtobel.com/office
LIGHT
FOR ART
AND
CULTURE
zumtobel.com/culture
LIGHT
FOR
PRESENTATION
AND
RETAIL
LIGHT
FOR
EDUCATION
AND
SCIENCE
zumtobel.com/education
zumtobel.com/shop
LIGHT
FOR
INDUSTRY
AND
ENGINEERING
LIGHT
FOR
HEALTH
AND
CARE
zumtobel.com/healthcare
zumtobel.com/industry
LIGHT
FOR
HOTEL
AND
WELLNESS
zumtobel.com/hotel
LIGHT
FOR
FAÇADES
AND
ARCHITECTURE
zumtobel.com/facade
Zumtobel, a company of the Zumtobel Group, is an internationally leading supplier of integral
lighting solutions for professional indoor and outdoor building lighting applications.
• Offices and Communication
• Education and Science
• Presentation and Retail
• Hotel and Wellness
• Art and Culture
• Health and Care
•Industry and Engineering
• Façades and Architecture
YEAR GUARANTEE
We provide unique customer benefits by integrating technology, design,
emotion and energy efficiency. Under the Humanergy Balance concept, we
combine the best possible ergonomic lighting quality for an individual’s well­
being with the responsible use of energy resources. The company’s own
sales organisa­tions in twenty countries, as well as commercial agencies in fifty
other countries, form an international network of experts and design partners
providing professional lighting consulting, design assistance and comprehen­
sive services.
Lighting and sustainability In line with our corporate philosophy “We want to use light to create worlds of
experience, make work easier and improve communications and safety while
remaining fully aware of our responsibility to the environment”, Zumtobel offers
energy-efficient high-quality products, while at the same time making sure that
our production processes based on the considerate use of resources are
environmentally compatible.
zumtobel.com/sustainability
Top quality – with a five-year guarantee.
As a globally leading luminaire manufacturer,
Zumtobel provides a five year manufacturer's
guarantee on all Zumtobel branded products
in accordance with the terms of guarantee at
zumtobel.com/guarantee.
Order no. 04 797 635-EN 06/2015 © Zumtobel Lighting GmbH
Technical data was correct at time of going to press.
We reserve the right to make technical changes without
notice. Please contact your local sales office for further
information. For the sake of the environment: Luxo Light is
chlorine-free paper from sustainably managed forests
and certified sources.
natureOffice.com | DE-101-933021
natureOffice.com | AT-101-130426
pefc.org
PEFC/06-38-214
Tracks and spots
Modular lighting systems
Downlights
Recessed luminaires
Surface-mounted and
pendant luminaires
Free-standing and
wall-mounted luminaires
Continuous-row systems and
individual batten luminaires
High-bay luminaires and
floodlight reflector systems
Luminaires with
extra protection
Façade, media and
outdoor luminaires
Lighting management systems
Emergency lighting
Medical supply systems
United Kingdom
Zumtobel Lighting Ltd.
Chiltern Park
Chiltern Hill, Chalfont St. Peter
Buckinghamshire SL9 9FG
T +44/(0)1388 420 042
lightcentreuk@zumtobelgroup.com
zumtobel.co.uk
USA and Canada
Zumtobel Lighting Inc.
3300 Route 9W
Highland, NY 12528
T +1/(0)845/691 6262
F +1/(0)845/691 6289
zli.us@zumtobel.com
zumtobel.us
Australia and New Zealand
Zumtobel Lighting Pty Ltd
333 Pacific Highway
North Sydney, NSW 2060
T +61/(2)8913 5000
F +61/(2)8913 5001
info@zumtobel.com.au
zumtobel.com.au
China
Zumtobel Lighting China
Shanghai office
Room 101,
No 192 YIHONG Technology Park
Tianlin Road, Xuhui District
Shanghai City, 200233, P.R. China
T + 86/(21) 6375 6262
F + 86/(21) 6375 6285
sales.cn@zumtobel.com
zumtobel.cn
Hong Kong
Zumtobel Lighting Hong Kong
Unit 4301, Level 43,
Tower 1, Metroplaza,
223 Hing Fong Road,
Kwai Chung, N.T.
T +852/2578 4303
F +852/2887 0247
info.hk@zumtobel.com
India
Zumtobel Lighting GmbH
Vipul Trade Centre, 406, 4th Floor
Sohna Road, Sector 48,
Gurgaon 122002, Haryana, India
T+91/124 4206885 6886
info.in@zumtobel.com
Singapore
Zumtobel Lighting Singapore
158 Kallang Way # 06-01/02
Singapore 349245
T +65 6844 5800
F +65 6745 7707
info.sg@zumtobel.com
United Arab Emirates
Zumtobel Lighting GmbH
4B Street, Al Quoz Industrial Area
Dubai, United Arab Emirates
T +971/4 340 4646
F +971/4 299 3531
info@zumtobel.ae
zumtobel.ae
Romania
Zumtobel Lighting Romania SRL
Radu Greceanu Street, no. 2,
Ground Floor, sector 1
012225 Bucharest
T +40 31225 38 01
F +40 31225 38 04
welcome.ro@zumtobel.com
zumtobel.com
Russia
Zumtobel Lighting GmbH
Official Representative Office
Skakovaya Str. 17
Bld. No 1, Office 1104
125040 Moscow
T +7/(495) 945 36 33
F +7/(495) 945 16 94
info-russia@zumtobel.com
zumtobel.ru
Hungary
ZG Lighting Hungary Kft.
Váci út 49
1134 Budapest
T +36/(1) 450 2490
F +36/(1) 350 0829
welcome@zumtobel.hu
zumtobel.hu
Norway
Zumtobel Belysning
Strømsveien 344
1081 Oslo
T +47 22 82 07 00
info.no@zumtobel.com
zumtobel.no
Croatia
ZG Lighting d.o.o.
Radnička cesta 80
10000 Zagreb
T +385/(1) 64 04 080
F +385/(1) 64 04 090
welcome@zumtobel.hr
Sweden
Zumtobel Belysning
Birger Jarlsgatan 57
113 56 Stockholm
T +46 8 26 26 50
info.se@zumtobel.com
zumtobel.se
Bosnia and Herzegovina
ZG Lighting d.o.o.
Topal Osman Pase 18
71000 Sarajevo
M+ 387 61 172 240
welcome.ba@zumtobel.com
Denmark
Zumtobel Belysning
Stamholmen 155, 5. sal
2650 Hvidovre
T +45 35 43 70 00
info.dk@zumtobel.com
zumtobel.dk
Serbia
ZG Lighting d.o.o.
Beton hala – Karađorđeva 2-4
11000 Belgrade
M+ 381 69 54 44 802
welcome@zumtobel.rs
Czech Republic
ZG Lighting Czech Republic s.r.o.
Jankovcova 2
Praha 7
170 00 Praha
T +420 266 782 200
F +420 266 782 201
welcome@zumtobel.cz
zumtobel.cz
Slovak Republic
ZG Lighting Slovakia s.r.o.
Vlčie Hrdlo 1,
824 12 Bratislava
welcome@zumtobel.sk
zumtobel.sk
Poland
ZG Lighting Polska Sp. z o.o.
Wołoska 9a
Platinium Business Park III
02-583 Warszawa
T +48 22 856 74 31
zgpolska@zumtobelgroup.com
zumtobel.pl
Slovenia
ZG Lighting d.o.o
Štukljeva cesta 46
1000 Ljubljana
T +386/(1) 5609 820
F +386/(1) 5609 866
si.welcome@zumtobelgroup.com
zumtobel.si
Headquarters
Zumtobel Lighting GmbH
Schweizer Strasse 30
Postfach 72
6851 Dornbirn, AUSTRIA
T+43/(0)5572/390-0
info@zumtobel.info
ZG Licht Mitte-Ost GmbH
Grevenmarschstrasse 74-78
32657 Lemgo, GERMANY
T+49/(0)5261 212-0
F+49/(0)5261 212-7777
info@zumtobel.de
zumtobel.com
zumtobel.com/clean