Garage Lighting
S Mount:
Metal
Halide
Large contoured, integral
Style 456
1:12 Scale
27" (686mm)
A
A
J
B
8-9/16"
(218mm)
B
D
C
D
3-1/4"
(83mm)
W Mount:
5-3/4"
(146mm)
K
L
18-1/4" (464mm)
mounting centers
16-1/8"
(410mm)
Mounting Plate
1:12 Scale
(W mount, wall only)
15-11/16"
(400mm)
E
H
5-1/2"
(140mm)
5-3/16"
(132mm)
F
25-3/8"
(645mm)
G
H
2-1/2"
(64mm)
M
12-3/4"
(324mm)
Specifications
A Mitred extruded
aluminum door with
silicone gasket
B Formed aluminum
flared cutoff visor
C Die-cast side arms
Features
D Aluminum mounting feet
E Contoured aluminum
end plates
F Specular extruded
aluminum reflector
G Die-cast end plates
Finish:
Exterior surfaces - 6 stage pretreatment and electrostatically
applied thermoset polyester powder coating for a durable
abrasion, fade and corrosion resistant finish. Choice of
semi-gloss colors (see ordering information).
Reflector and internal end plates - extruded high purity
aluminum with clear anodized specular finish. All hardware
and components - non corrosive stainless steel or aluminum.
Door secured with captive tamper-resistant (#10 Torx) screws
in stainless steel threaded reflector inserts to prevent seizing.
Mounting:
S mount - L-shaped mounting feet attach under sidearms.
13/32" dia. (10mm) clearance holes (3/8" fasteners by others).
W mount - latch/hinge mounting plate fastens over recessed
outlet box and allows hands-free access to splices
(1/4" fasteners by others). For wall mounting only.
Suitable backing structure required (by others).
Standard:
Suitable for protected outdoor locations such as parking
garages and under canopies. Reflector is sealed for
wash-down. UL listed or CSA certified for damp locations.
REV. 4/04
H Stainless steel
latch/hinge mounting
plate (black)
J Clear, flat, thermal
and impact resistant
tempered glass lens
K Internal splice
compartment (S mount)
L Extruded aluminum
ballast housing
M Recessed outlet box
(by others)
Electrical:
Use 90°C wire for supply connections.
S mount - internal splice compartment with two 1/2" NPT
entries (right end plate when facing lens; conduit and fittings
by others).
W mount - latch/hinge mounting plate allows hands free
access to splices in recessed outlet box (by others).
Lamp leads exit reflector and enter ballast housing through
watertight flush cord entries and silicone coated fiberglass
sleeving.
250, 400W metal halide - position oriented mogul lampholder
for use with either horizontal or universal position lamp.
150W - pulse rated medium base lampholder. End-of-lamp
aligner ensures consistent optical performance, minimizes
damage from shock or vibration.
Integral HPF ballast rated for -20°F/-29°C starting.
250, 400W - constant wattage autotransformer;
150W - high reactance autotransformer (electronic
ballast optional).
■ Unique asymmetric performance - creates expansive
planes of light to eliminate glare and minimize shadows
■ Mounting flexibility - wall plate over J-box or mounting feet
with surface conduit
■ Built to last - all aluminum and stainless steel components;
tempered glass lens, tamper-resistant door screws
Performance
Two parabolic reflector
sections drive light
across the overhead
plane from one edge.
An elliptical section
redirects its light to a
parabola and shields
the lamp. Asymmetry
is maximized resulting
in high beam efficiency
and superior surface
uniformity. The fast
"runback" minimizes
wasted spill light.
Wide lateral distribution
permits greater
spacings.
250W
MH
12000
Cd
For complete photometrics, see www.elliptipar.com.
elliptipar
GL
3.0
Style 456
To Order
Project:
To form a Catalog Number
M 4 5 6 1
2
3
4
5
-F
6
7
8
1 Source
6 Voltage/Ballast
M = Metal halide
Magnetic
A = 120V
B = 277V
H = 347V (Canada)
*150W only
2 Style
456 = Large garage uplight, contoured reflector,
integral ballast
Lamp
Code
Accessories
Electronic*
1 = 120V
2 = 277V
Order separately. See Accessories Section for specifications.
AEDV20D0 = External vertical blade baffle, 25° (offers
lengthwise shielding from adjacent raised
viewpoint e.g. stairs)
7 Option (See Accessories Section for specifications)
3 Lamp
Wattage
Lamp
Number
Voltage(s)
Ballast
Metal Halide*
0150
150
CMH150/U/MED
0250
0400
250
400
MH250/T15
MH400/T15
A, B, H
1, 2
A, B, H
A, B, H
HX-HPF
Electr.
CWA
CWA
For complete lamp and ballast information, see Accessories Section.
* Use clear horizontal or universal position lamp with compact envelope.
150W is ceramic arc-tube lamp yielding higher light output, improved
color consistency and stability (±200K). 250 and 400W lamps are
horizontal position mogul base (POMB) that yield higher light output
than universal position lamps. Lamp included - standard color is
3000K for 150W, 3200K for 250 and 400W.
GL
3.1
Type:
4 Mounting
S = L-shaped feet for surface mounting. Internal splice
compartment with (2) 1/2" NPT threaded entries.
W = Latch/hinge wall plate fastens over recessed outlet
box (by others).
F0 = Flared cutoff visor included, no other options.
FR = Halogen standby lighting with relay.
FL = Micro-prismatic tempered glass lens (replaces clear
flat lens, offers smoother light pattern at reduced
peak candlepower).
XX = For modification not listed, include detailed description.
Note: Flared cutoff visor included with all options.
AFK000X
= Ballast fuse kit
0 = UL
J = CSA
8 Standard
0 = UL, Underwriters Laboratories
J = CSA, Canadian Standards Association
Example
M456 - 0250 - S - 02 - B - F00
Large contoured garage uplight for use with 250W metal
halide lamp (included). Surface mounted on wall with
L-shaped feet. Internal splice compartment (liquidtight
conduit and fittings by others). Semi-gloss white. Integral
277V ballast. UL listed. Flared cutoff visor included.
5 Finish
02
06
07
08
99
=
=
=
=
=
Semi-gloss white
Dark bronze
Silver
Semi-gloss black
Custom RAL or computer matched color to be
specified, consult sales representative.
REV. 4/04
elliptipar
elliptipar
114 Boston Post Road, West Haven, Connecticut 06516, USA
Voice 203.931.4455 Fax 203.931.4464 www.elliptipar.com
■
■
The external shapes of the asymmetric reflectors are trademarks of elliptipar.
Certain products illustrated may be covered by applicable patents and patents pending.
For a list of patents, see Contents pages. These specifications supersede all prior
publications and are subject to change without notice. © 2007 elliptipar.