LED LIGHTING
WWW.FMP-AS.NO
1
2014/2015
LIGHTING SYSTEMS
9
65
VIP LED
L
65
A
A modern line of system lighting luminaires made
of thick-wall aluminum profile with high resistance parameters. The direct (DI) lighting beam,
can be obtained by means of micro prismatic diffuser. Thanks to the series of additional mounting
accessories the luminaires can be easily mounted
and offer many different universal configurations.
Materials: powder painted aluminum profile
(grey colour in standard). Micro prismatic diffuser
(MPRM)
Installation: surface mounted, wall mounted or
suspended.
Accessories: joints (linear joint, 90° joint, T-joint,
cross joint, Y-joint, wall joint, ceiling joint); suspensions (simple, electric), end caps
Power supply: 230 V; the quick-release 5-pole
connection block allows to join the luminaires in
line.
137
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
*
VIP LED 46W MPRM
VIP G/K LED
FOR PLASTER
- CARDBOARD CEILING
86
MOUNTING HOLES
In case of in-line installation add up lengths of all used luminaries (L dimension)
and increase the result by 10mm e.g. mounting hole for line including
VIP 38W + VIP 46W = 1183+ 1483 + 10 = 2676mm
Lighting luminaire from the family VIP, adapted
for mounting into plaster-cardboard ceiling. The
appropriate joints (linear and T-joint) allow to
connect the luminaires in a straight line or to create the 90° angle.
Materials: powder painted aluminum profile
(grey colour in standard); micro prismatic diffuser
Installation: into plaster-cardboard ceiling with
appropriate mounting brackets.
Accessories: linear joint, 90° joint, end caps
Power supply: 230 V, the quick-release 5-pole
connection block allows to join the luminaires in
line by sections. DALI - on request.
10
DISTANCE BETWEEN
BRACKETS
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
40
80
120
160
VIP GK LED
*
CODE
OPAL
46
VIP MINI
46
A
VIP MINI, a new, subtle and miniaturized lighting luminaire, is enlarging the offer of VIP
products. The body made of aluminum profile, the direct (DI) lighting beam. As in the
case of VIP, the additional accessories allow
various configurations of lighting luminaires.
Power factor: cos ϕ > 0,95.
Materials: powder painted aluminum profile
(grey colour in standard), micro prismatic diffuser
(MPRM).
Installation: surface mounted, wall mounted or
suspended.
Accessories: joints (linear joint, 90° joint, T-joint,
cross joint, wall joint, ceiling joint); suspensions
(simple, electric), end caps
Power supply: 230V; the quick-release 5-pole
connection block allows to join the luminaires
in line by sections, PUSH DIMM regulations on
request. Do not available with emergency module.
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
*
VIP MINI LED 42W
VIP MINI KINKIET
55
92
46
46
L
A
VIP MINI BRACKET is a miniaturized lighting luminaire designed for wall mounting, complementing VIP series. Made of aluminum profile VIP MINI
BRACKET is an additional decorative and accenting lighting luminaire perfect for subtle lighting
.
Materials: electrostatically painted aluminum
profile (gray color in standard). MPRM diffuser.
Installation: wall mounted
Power supply: 230 V
POWER
VIP MINI KINKIET
19W LED
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
*
11
46
VIP KINKIET IP44
100
92
46
L
155
VIP BRACKET IP44 is a subtle and minimalistic extension of VIP system made of aluminum profile
and direct light distribution.
VIP BRACKET IP44 was designed as an
accenting wall luminaire for use in bathrooms,
corridors and conference rooms.
Materials: electrostatically painted aluminum
profile (standard gray), OPAL polycarbonate diffuser.
Installation: wall mounted
Power: 230 V
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
VIP KINKIET IP44
*
TRACK PRO LED
L
An elegant and modern system lighting luminaire
with the direct lighting beam. The luminaire is
made of aluminum profile, chip LED of renown
producers. Power factor cos ϕ > 0,95. The construction allows an easy connection of different
modules (for fluorescent tubes, halogen lamps
and LED) from the whole series TRACK by means
of linear and 90° joints. To connect luminaires at
the angle of the 90° suitable TRACK SPOT module
is necessary.
Materials: powder painted aluminum profile
(grey colour in standard). Micro prismatic diffuser
Installation: suspended
Accessories: - linear joint, 90° joint; suspensions
(simple, electric)
Power supply: 230V
12
POWER
TRACK PRO LED 47W
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
CODE
S
B
A
INTERNAL
FLOODLIGHTS
13
RAY II LED
REY II LED AR111
POWER
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
COLOUR
CODE
*
Two axis adjustable floodlight of small size for
LED light sources.
POWER
Materials: powder painted grey aluminum body,
aluminum reflector, tempered clear glass.
Installation: for electrical track and ceiling montage
Power supply: 230 V
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
REY II LED
*
KEP LED
KEP FORTIMO
LAMP*
ANGLE OF
LIGHTING BEAM
[kg]
COLOUR
INFO
CODE
244
160
220
POWER
200
61
101
*
POWER
LAMP*
ANGLE OF
LIGHTING BEAM
[kg]
COLOUR
INFO
CODE
305
40
160
207
284
KEP 3000
219
48
108
*
219
LAMP*
ANGLE OF
LIGHTING BEAM
[kg]
COLOUR
INFO
CODE
305
40
160
207
284
KEP 5000
POWER
61
108
*
Elegant and innovative, designed especially for
LED light sources, KEP luminaire sets a new standards in projectors class. It ideally adapts to every
type of environment and equipment. Specially
shaped luminaire’s body allow high heat dissipation and adjustment of luminaire’s position by
350° both vertically and horizontally.
14
Materials: body and component compartment in
polyester painted die-cast aluminum. Reflectors
in polycarbonate with mirror finish.
Installation: for electrical track, wall mounting,
ceiling mounting
Accessories: optic device for 49° beam - only for
FORTIMO version
KEP FORTIMO
KEP 5000
KYCLOS LED
KYCLOS
POWER
LAMP*
ANGLE OF
LIGHTING BEAM
[kg]
COLOUR
INFO
CODE
268
207
250
40
213
65
108
*
KYCLOS COMPACT
LAMP*
ANGLE OF
LIGHTING BEAM
[kg]
COLOUR
INFO
CODE
65
125
POWER
180
120
38
150
*
MINI KYCLOS
LAMP*
56
88
POWER
[kg]
COLOUR
INFO
CODE
126
64
37
ANGLE OF
LIGHTING BEAM
Kyclos is a modern LED floodlight for electrical tracks.
It’s characteristic for its innovative, passive heat removal
system, the delicacy of style and high efficiency. Perfect
for lighting of shops, exhibitions and art galleries.
Materials: epoxy-polyester painted die-cast aluminum. Front made of transparent or painted polycarbonate. Metalized reflector made of thermo plastic material
Installation: to electrical tracks, on a base version - on
request
Accessories: reflector for beam angle regulation
120
*
KYCLOS 51W 28°
KYCLOS 51W 44°
KYCLOS 51W 66°
KYCLOS 39W 28°
KEP LED
KEP LED
15
16
INTERIOR LUMINAIRES
PARABOLIC LED
Light housing
LED louver module o high luminous efficacy
Body made of high quality galvanized,
electrostatically painted steel
Parabolic louver reduces
glare rating (UGR) in the
Parabolic LED luminaries to 15
LEDs installed on a specially designed PCB
blades
Microprismatic diffusors regulate light
distribution and protect electronic components from direct contact with user
Color temperature: 3000K and 4000K.
Instant ignition of light sources.
LED light sources of renowned producers
with high luminous efficacy (up to 125 lm/W)
and Color Rendering Index CRI >80
Optional: possibility of regulation of light
beam through light sensors, automation
and light control systems
Installation in the suspended ceiling 600x600
Ceiling mounted
Suspended
Power supplies of reputable manufacturers
with power factor (cos fi = 0,97) with
internal protection against:
- overload
- short-circuit
- overtemperature
(thermal protection)
17
BARI ii LED
Aluminum radiator is giving optimum operating conditions for LEDs
Reflector made of high-quality polished aluminum with a purity of 99.85%
Easy installation by the application of special mounting brackets
Tempered glass protects the LED light source
Possibility painting in any of RAL colors
IP44 class of protection
PERFECT THERMAL CONDITIONS FOR LEDS
Power supplies of renowned manufacturers are equipped with internal protections
against:
- overload
- short-circuit
- overtemperature (thermal protection)
LEDs of renowned manufacturers with
integrated power supply of high luminous
efficacy (80 lm/W) and color rendering index
CRI>80. Instant light source ignition.
Low glare effect achieved by proper mounting of LEDs
h=2,5m
360°
Light distribution ideally suited to illuminate
office spaces, lobbies and corridors. Light beam
angle: version 155 - 48°, version 195 - 60°.
3 - 12m
Possibility of cooperation with motions sensors without affecting the life of light source.
Possibility of light beam regulation in DC version.
18
ENERGY EFFICIENT LIGHTING
SUN LED
IP44 class of protection
Power supplies (cos ϕ = 0,97) of renowned manufacturers are equipped with
internal protections against:
- overload
- short-circuit
- overtemperature (thermal protection)
LEDs of renowned manufacturers of high
luminous efficacy (up to 124 lm/W)
and CRI > 80
Option:
possibility of regulation of light beam
by implementation of light sensor,
automation and control
Color temperature:
3000 K (warm white)
4000 K (natural white)
Mounting into modular
ceiling 600x600 with a visible
supported structure
Suspended
19
SOLID LED IP65
Tempered glass resistant to aggressive
environments factors
Housing made of high quality galvanized
steel
Corrosion and poor working conditions
resistance. Cover with increased degree
of protection IP65
Optimal working conditions of LEDs
significantly extend their lifetime
HIGH LIGHTING PARAMETERS – LUMINARIE”S EFFICIENCY ŋ = 79%
PCB blades designed individually
for Solid LED
- known
High quality of LED of well manufacturers guarantees maintenance-free operation of the luminaire
High luminous efficacy of LED of 122 lm/W
Diodes power supply with components
of reputable companies
CONSTRUCTION OF SOLID LED WAS DESIGNED AND ADAPTED FOR HOSPITAL FACILITIES
High heat dissipation factor
Optional:
possibility of light beam regulation
Optional: possibility of using an additional
green LED module
Safe, shatterproof tempered glass
20
Seal ensures tightness of the housing and
safe housing-glass contact
Glass frosting in the illuminated sections
ensures uniform light distribution and
eliminates glare effect
Savings on electricity in medical rooms
where high light intensity is required
UNI LED
4,5 cm
Housing made of galvanized steel
Compact, extremely flat design makes
the fixture suitable for almost any interior, giving it an unique character
Powder coating guarantees high class
of protective cover and aesthetic look
Three types of diffusor tailored to
customer needs
Universal construction
h=2,5m
360°
3 - 12m
Possibility of installation of external
motion sensor
Frame with diffuser is mounted on the magnets, for ease of installation and access to
the inside of the housing. Frame is also equipped with line protecting
Possibility of installation of emergency module
Ceiling mounted
Suspended mounting
Mounting into modular ceiling 600x600
with a visible supported structure
The use of different diffusors: micro prismatic
(MPRM), prismatic (PRM), milk (OPAL) provides protection against glare and even illumination of work
space while maintaining high efficiency
LEDs of renowned manufacturers of high luminous
efficacy (up to 124 lm/W) and CRI > 80
• Possibility of adjustment of luminous flux
Power supplies (cos ϕ = 0,97) of renowned manufacturers are equipped with
internal protections against:
- overload
- short-circuit
- overtemperature (thermal protection)
• Natural color of light
Installation of LEDs on specially designed PCB blades
21
MILENA LED
High-quality nickel-plated handles provide
aesthetic appearance and solid suspension
Back plate installation of LEDs provides
a large surface for heat dissipation and
guarantee optimal operating temperature
for diodes.
Extreamly slim design fits into any interior,
giving it an unique character
3 cm
Housing made of high grade aluminum
alloy
COMFORTABLE INSTALLATION
LED power supply is a temperature sensitive
device, because of that it has to be installed on
the ceiling where thermal conditions are met
and access is easy
Possibility painting in any of RAL colors
LEDs of renowned manufacturers have
a high efficiacy of over 115 lm/W
Natural color of light
Installation of LEDs on specially designed
PCB blades
Possibility of regulation of light beam by
implementation of light sensor, automation
and control
Micro prismatic plate provides equal illumination of work space and protect the
user against negative glare phenomenon
22
Intensity control
TT LED PLAFON
46
48
PLAFOND
12
47
45
205
330
47
47
751,8
830
330
46
48
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
*
Lighting luminaire of modern design equipped
with LED light source from renowned producers.
Characterized by uniform, indirect light distribution and the circumference light effect.
Materials: anodized aluminum body; transparent
diffuser made of PMMA; housing of the power
supply made of stainless steel.
Installation: surface mounted or suspended
Accessories: simple and electric suspension
Power supply: 230V
Simple suspension
[kg]
COLOUR
CODE
INFO
[kg]
COLOUR
CODE
INFO
* Standard lenght of suspension maximum 1,5m
Electric suspension
* Standard lenght of suspension maximum 1,5m
TT LED PLAFON 45W
TT LED 600x600
515
595
FOR MODULAR CEILING
12
70
41
595
108
517
POWER
Innovative lighting luminaire with a simple,
very elegant shape. The luminaire profile with
a thickness of only 12 mm. LED light sources with
high colour rendering index and high durability.
Diffuser with micro-optics provides a uniform
luminance on the surface of the luminaire and
the high lighting comfort. In the luminaire’s only
the first-class AC power supplies are used of
cos ϕ > 0,95.
Materials: anodized aluminum body; diffuser
with micro-optics
Installation: into modular ceiling 600x600 with
a visible supported structure or into plaster-cardboard ceiling
Power supply: 230 V
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
*
TT LED 600x600 45W
MPRM
Mounting bracket for 600x600 ceiling
CODE
Set (4 pcs.) / luminaire
TT LED 600x600 45W
OPAL
Mounting bracket
for the plaster-cardboard ceiling
CODE
Set (2 pcs.) / luminaire
23
TT LED KINKIET
200
250
BRACKET
220
200
12
45
52
410
40
A modern, accentuating lighting luminaire with
a very sublime and esthetic form. The appropriate
orientation of the light beam, combined with low
power of light sources, allowed to create a unique
visual effect.
Materials: body made of anodized aluminum;
opal diffuser made of PMMA
Installation: wall mounted
Power supply: 230V
POWER
LAMP
[kg]
COLOUR
INFO
CODE
TT LED KINKIET
50
154
DUET II
70
50
50
Wall mounted lighting luminaire with high power and efficient LED COB (Chip-On-Board) light
sources from renowned producers. LED COB
lighting is characteristic for its low failure rate, no
multipoint emission effect, resistance to voltage
fluctuations and comfortable light without pulsation effect. LED diffuser has been applied for better light distribution.
Materials: housing made of powder painted
aluminum (grey colour in standard), transparent
plate made of polycarbonate
Installation: wall mounted
Power supply: 230V
24
POWER
DUET 40°
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
CODE
FINESTRA LED
Energy-saving decorative lighting luminaire of
modern and elegant shape equipped with LED
light source from renowned producers. FINESTRA
by universal form and type of assembly is suitable for public spaces, conference rooms, offices,
communications, halls, stairways. The first-class
AC power supply of renowned brands achieves
cos ϕ >0,95. This luminaire perfectly complements to the rest series of FINESTRA luminaires.
Materials: powder painted, grey steel sheet body;
available diffusers: microprismatic (MPRM) or
prismatic (PRM)
Installation: surface mounted, suspended and
wall mounted
Accessories: simple and electric suspension
Power supply: 230 V
65
68
307
307
407
407
FINESTRA LED 20W
FINESTRA LED 13W
FINESTRA LED 20W
CODE
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
FINESTRA INOX
LED
337
65
337
437
65
437
FINESTRA INOX
LED 20W
Lighting luminaire with a minimalist form, based
on LED technology. Microprismatic or prismatic
diffuser provides a uniform luminance on the
surface of the luminaire. The first-class AC power
supply of renowned brands achieves cos ϕ >0,95.
FINESTRA INOX LED is suitable for public spaces, conference rooms, offices, communications,
halls, stairways.
Materials: steel sheet brushed INOX body; steel
sheet base in white colour; available diffusers:
microprismatic (MPRM) or prismatic (PRM)
Installation: surface mounted
Power supply: 230V
FINESTRA INOX
LED 13W
FINESTRA INOX LED 20W
POWER
CODE
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
25
FINESTRA RING
LED
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
Unviersal plafond in modern version for LED light
sources. In the luminaire only highest quality AC
power supplies of renowned brands and cos ϕ
higher than 0,95 are used.
Materials: powder painted, grey aluminum body;
base made of steel sheet. Prismatic PRM (PMMA)
diffuser, microprismatic MPRM diffuser.
Installation: surface mounted, suspended
Power supply: 230 V
*
Suspension set
FINESTRA RING LED 26W
[kg]
COLOUR
CODE
* Standard lenght of suspension maximum 1,5m
FUZO LED
B
A
FUZO 420x240
H
FUZO 240x240
POWER
LED luminaire for universal use. Made with use of
energy-saving LEDs of high luminous efficiency
from reputable manufacturers. FUZO have been
provided with power supply with power factor
cos ϕ > 0,95. Available with housing of different
colors, suitable for any interior color.
Application: offices, conference rooms, corridors.
Materials: frame made of electrostatically painted aluminium profile (standard – grey). Frame can
be painted in any RAL color. White housing made
of sheet steel. MPRM micro-prismatic diffusor.
Installation: suspended ceiling with visible supporting structure or plaster cardboard ceiling
Power supply: 230 V
26
POWER
FUZO LED 34W
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
CODE
KARDO
195x195
348x195
500x195
Multidirectional, accentuating lighting system
with adjustable and independent spotlights designed for plaster-cardboard ceilings. Control
gear and electronic transformators included.
Materials: powder painted, grey aluminum
frame; aluminum rings; body made of steel
sheet in black colour; light sources adjustable in
two planes.
Installation: into plaster-cardboard ceiling
Accessories: surface mounted body
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
*
KARDO LED 1x12W
CUBE DLN
160
160
Cubic lighting luminaire of modern design combined with LED technology makes CUBE DLN
a great solution for lighting both office spaces
and aisles. Simple construction and austere design relate to modern interior design aesthetics.
CUBE DLN 23W 4000K
POWER
LED light source has an integrated heat sink that
allows free flow of air around the LED source and
therefore more efficient cooling.
Materials: steel sheet electrostatically painted in
gray. All other colors from RAL color palette are
available.
Installation: surface mounted, suspended
(for suspended version suspension included)
Power supply: 230V
27
110
160
110
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
CODE
*
**
27
BARI II LED
95
Ø1
55
Ø1
Ø
15
0
150
155
Ø1
14
Modern and universal downlight luminaire of
high lighting performance, based on LED module.
Application: offices, hotels, restaurants, halls,
shopping malls.
Advantages: thermal profiles made of high
quality aluminum ensure a proper working temperature of LEDs, long operating time
> 50 000 h, LEDs of renowned manufacturers of
high luminous efficacy (80 lm/W) and CRI > 80,
possibility painting in any of RAL colors. Possibility of light beam regulation in DC version and cooperation with motion sensors.
Materials: powder painted, white aluminum ring;
steel sheet body; transparent tempered glass
(SH). Reflector made of polished aluminum with
a purity of 99.85 %.
Installation: into plaster-cardboard and modular
ceilings
Power supply: AC version – 230V – integrated
power supply, DC version – 230V – external power
supply, included.
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
CODE
[kg]
COLOUR
*
BARI II LED
** AC version – 230V – integrated power supply
*** DC version – 230V – external power supply, included
BARI II MINI LED
20
Ø1
Ø
110
79
Modern and universal downlight luminaire of
high lighting performance, based on LED module.
Application: offices, hotels, restaurants, halls,
shopping malls.
Advantages: thermal profiles made of high
quality aluminum ensure a proper working temperature of LEDs, long operating time
> 50 000 h, LEDs of renowned manufacturers of
high luminous efficacy (100 lm/W) and CRI > 80,
possibility painting in any of RAL colors.
Materials: powder painted, white aluminum ring;
steel sheet body; transparent tempered glass
(SH). Reflector made of aluminum with a purity
of 99.85 %.
Installation: into plaster-cardboard and modular
ceilings
Power supply: 230 V
28
POWER
BARI II MINI LED
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
CODE
PF 19 / PF 30
190
40
40
300
109
91
PF 19 - REFLECTOR 50°
PF 30 - REFLECTOR 120°
PF 19
POWER
LAMP
[kg]
COLOUR
PF 30
INFO
CODE
PF 19 108°
PF 30 21W
Extremely thin ceiling luminaire, especially designed for LED light sources. Perfect for discrete
and elegant interior lighting.
*IP40 ceiling
IP44 wall mounting
Materials: housing in die-cast aluminum with an
innovative thermic dissipation system, polyester painting in white, silver or black color. Optic
made of high resistance faceted polycarbonate,
mirror metallized in high vacuum. Diffuser in
OPAL polycarbonate.
Installation: ceiling mounted, wall mounted
Power supply: 230 V
OS LED
73
OS LED
73
1x4W
1x4W
1x4W
1x4W
LED
LED
LED
LED
0,50
0,50
0,50
0,50
20°
20°
40°
40°
2900K
5400K
2900K
5400K
PX0864101
PX0864108
PX0864115
PX0864122
A series of adjustable LED spotlights with IP65,
designed for accent lighting outside the buildings
and in humid rooms.
Materials: ring of powder painted aluminum in
white colour.
Installation: into suspended ceiling
Power supply: 230 V
POWER
LAMP
[kg]
COLOUR
ANGLE
OF LIGHT BEAM
INFO
CODE
OS LED 4W
29
MONZA II LED
A
B
50
223
23
30
MONZA LED 47W
CODE
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
New luminaire of modern design, based on
LED lamps, dedicated for ceiling or suspended
mounting. Compact and adjustable MONZA II
LED is a great solution for both small and bigger
spaces, perfect for offices, corridors and many
other. The LED luminaires uses diodes of reputable manufacturers. High quality power supply
provides high power factor >0,95.
Materials: powder painted body made of steel
sheets and durable polycarbonate. OPAL and
prismatic diffusers made of PMMA.
Installation: ceiling mounted, suspended
Accessories: suspensions type Y (simple, electric)
Power supply: 230 V
*
PARABOLIC LED
version 1 x...
41
1196
596
41
7
NT
7
45
45
version: 3x... and 2x...
48
596
PARABOLIC LED 40W
Modern louver luminaire for LED light sources
of high technical and optical parameters. The
luminaire has a very low glare rating thanks to
the parabolic, aluminum louvers and low power
consumption comparing with conventional light
sources. Because of the innovative optical system Louver LED is ideally suited for lighting office
spaces and in particular for work with computers.
For suspended version of the luminaire the calculation should
consist of: recessed version of the luminaire, one simple
and one electric suspension
48
296
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
INFO
CODE
Materials: white housing made of electrostatically painted steel, parabolic louver made of anodized, polished aluminum of high purity, replaceable LED module with additional micro prismatic
diffusor.
Installation: 600x600 suspended ceilings with
visible supporting structure, surface mounted,
suspended
Accessories: suspension (regular, electric)
Power supply: 230 V
*
30
UNI LED
135
26
595
500
45
440
500
595
UNI LED 45W OPAL
Universal luminaire designed specifically for
LED light sources. Simple installation, LED chips
of reputable manufacturers and power factor
cos ϕ = 0,97 makes the UNI LED a high quality
product with a wide range of possible applications.
UNI LED is available in versions with motion
sensor and emergency module.
Materials: housing made of electrostatically
painted galvanized steel (standard color – white),
micro prismatic diffuser MPRM, prismatic diffuser
PRM or OPAL, magnets mounted frame.
Installation: ceiling mounted, suspended, into
modular ceiling 600x600 with a visible supported
structure
Accessories: motion sensor, emergency module,
simple and electric suspension
Power supply: 230 V
CODE
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
47
SUN LED
596
70
277
596
47
296
53
117
SUN LED 45W
1196
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
INFO
CODE
Modern luminaire designed for LED light sources
of high lighting efficiency.
SUN LED has an aesthetic appeal, it’s light and
quick in installation. It also connect high lighting
performance with low level of Unified Glare Rating (UGR).
SUN LED has been equipped with a power supply
with power factor cos ϕ > 0,95. DALI ballast – on
request. Product is designed for offices, conference rooms and passageways.
Materials: housing made of steel, electrostatically painted in white (standard color) with all
other RAL colors available. Microprismatic diffuser (MPRM).
Installation: in the modular ceiling with visible
grid, suspended
Power supply: 230 V
Standard lenght of suspension maximum 1,5m Suspended version - suspension in set
*
31
30
9
LEDISK
25
12
283
Modern luminaire with powerful LED light sources
of well know producers. LEDISK is characterized
by an unique plastic processing technology used
for the preparation and molding of the diffusors
used for forming of the light beam. This allows
you to get the original style and small thickness
of the frame (only 10 mm). The luminaire can be
used as a lighting of representative rooms: lobbies, lounges, conference rooms and apartments.
Materials: aluminum ring electrostatlically painted
in white, milled PMMA plate, electric suspension
in aluminum profile
Installation: suspended (suspension included)
Power supply: 230 V
POWER
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
LAMP
EFFICACY*
[kg]
COLOUR
CODE
*
LEDISK 20W
MILENA LED
Susspension
C
72
46
B
30
144
A
Modern LED lighting luminaire with high
luminous efficiency and subtle design, is an ideal
application for representative rooms.
Materials: aluminum profile powder-painted in
two colors – gray and black (all colors in RAL
pallet available). Micro prismatic diffuser (MPRM).
Installation: suspended (suspension included)
Power supply: 230 V
32
POWER
MILENA LED 54W
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
CODE
102
ROMA ECO LED 34W
MPRM
POWER
LAMP
62
ROMA ECO LED
ROMA ECO LED 34W
OPAL
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
INFO
[kg]
CODE
[kg]
CODE EM 3H
[kg]
CODE EM 3H
Solid and popular lighting luminaire designed
for budget units. High energetic efficiency with
minimalized power consumption. For installation
in suspended ceilings with exposed grid.
Materials: body made of steel sheets, powder
painted in white. Diffusors available in OPAL, prismatic (PRM) and mikro prismatic versions
Installation: into modular ceiling 600x600 with
a visible supported structure
Power supply: 230 V
*
EM 3H - emergency module
PISA ECO LED
PISA ECO LED 45W MPRM
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
INFO
[kg]
CODE
Solid and popular lighting fixture designed for
offices and public buildings. High energetic
efficiency with minimalized power consumption.
Available in versions with motion sensor and
emergency module.
Materials: body made of steel sheets, powder
painted in white. Diffusors available in OPAL, prismatic (PRM) and mikro prismatic (MPRM) versions
Installation: into plaster-cardboard ceiling
Power supply: 230 V
EM 3H - emergency module
*
33
LATTE NEW LED
The 20W version can be equipped either with motion sensor or emergency module.
The 38W and 47W version can be equipped both with motion sensor and emergency
module.
POWER
LATTE NEW LED 20W
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
INFO
LATTE NEW LED 47W
A classic lighting luminaire with diffuser based on
high quality LED light sources for general lighting.
Materials: powder painted, steel sheet body in
white colour, CLEAR diffuser.
Installation: surface mounted
Power supply: 230 V
*
596
91
SOLID LED
596
Economically effective LED luminaire of high endurance designed for clean environments and
industrial areas with need for higher protection
rate. Sandblasted and tempered glass provides
a high degree of protection of light sources and
uniform light distribution. Luminaire available
with additional “green light” module as an option
to be used in specialized treatment rooms and
laboratories.
Materials: housing made of galvanized steel
electrostatically painted in white, sandblasted
and tempered glass
Installation: 600x600 suspended ceilings with
visible supporting structure
Accessories: green LED module
Power supply: 230 V
34
POWER
SOLID LED
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
*
CODE
CIRCLE
595
450
0
17
595
5
44
5
44
0
17
449
High-grade luminaire with a subtle and evenly
distributed light beam. CIRCLE is equipped with
opal diffuser blending harmoniously with the
surface of the ceiling. Perfect choice for offices,
corridors and lobbies.
Materials: housing made of steel, electrostatically
painted in white (all colors in RAL pallet available),
diffuser - opal plate (PMMA).
Installation: suspended ceilings with exposed
grid 600x600 or G/K ceilings (gypsum plasterboard).
Power supply: 230 V
CIRCLE
CIRCLE G/K
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
63
63
449
CIRCLE 600x600
COLOUR
INFO
CODE
*
35
PLAFONDS
36
MODENA LED
Housing made of high-quality, UV-proof, engineered plastic resistant to
external conditions
A simple form to be used either indoor
or outdoor
Electronic components of renowned
manufacturers
LEDs of renowned manufacturers of
high luminous efficacy and color rendering index CRI>80
Equal distribution of LEDs in the luminaire guarantees circularly- symmetric shape of the photometrics
Installation of LEDs on specially designed PCB blades
Elastic diffuser
High mechanical resistance of the
diffuser
Diffuser mounted with screws for easy access
into the luminaire and for increased safety of use
Installation both on the ceiling and on the walls
with complete stability of the construction
37
MODENA MINI LED
LEDs of renowned manufacturers of high
luminous efficacy (up to 115 lm/W) and color
rendering index CRI>80
Power supplies of renowned producers
ensures optimum working conditions of LEDs
Equal distribution of LEDs in the
luminaire guarantees circularlysymmetric shape of the photomtrics
h=2,5m
360°
DIFFUSER OF THE MODENA MINI LUMINAIRE - VIEW FROM ABOVE
3 - 12m
Possibility of regulation
of motion sensor
Possibility of emergency module installation
The new, improved
version has a modified
LED diodes arrangement.
Diffuser fastened with
allows quick installation
snaps
BASE OF THE MODENA MINI LUMINAIRE - VIEW FROM ABOVE
Installation both on the ceiling and on the walls
with complete stability of the construction
white version
38
grey version
MODENA LED
IP66IK10
298
35
4
Plafond with high esthetic features and over
standard parameters: UV proof, highly resistant to
mechanical factors and adverse external conditions. Protection degree IP66, body of high quality material. Emergency module AW 3H. Plafonds
available with motion detector, daylight sensor or
emergency module.
Materials:
• white version: body and diffuser made of polycarbonate (PC) in white color with UV stabilization protecting against getting yellow, vandalproof - IK10
• transparent version: transparent body and diffuser made of polycarbonate (PC) with UV stabilization protecting against getting yellow, vandalproof - IK10
• grey version: body in grey color, diffuser made
of polycarbonate (PC) in white color with UV
stabiliza-tion protecting against getting yellow,
vandal-proof - IK10
Installation: surface or wall mounted
Power supply: 230 V
110
50
298
400
AW 3H - version with 3h emergency module
MODENA LED 26W
OPAL
MODENA LED 26W
TRANSPARENT
CODE
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
INFO
*
MODENA MINI LED
315
90
45
285
IP54
Ø
5
4,
44
225
106
Modern plafond MODENA MINI is an extension of
MODENA family of luminaries. Highly aesthetic
and characteristic for great parameters: resistance to external conditions and UV rays with
IP54 degree of protection. Available with AW 3H
emergency module. Possibility of application of
motion sensor.
The LED luminaires uses diodes of reputable
manufacturers. High quality power supply provides high power factor.
Materials:
• white version: base and diffusor made of white
policarbonate with UV stabilization which protects the luminaire against yellowing
• grey version: grey base, OPAL diffusor made of
policarbonate with UV stabilization which protects the luminaire against yellowing
Installation: ceiling mounted, wall mounted
Power supply: 230 V
MODENA MINI LED
CODE
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
INFO
*
39
architectural luminaires
40
MINITEN / TEN
Wall mounted lighting luminaire of direct-indirect
light distribution. High IP 66 protection class allow both indoor and outdoor use. Dedicated for
illumination of architectural elements, building
facades, paths and sidewalks.
Materials: body in die-cast aluminum of increased resistance for chemicals, corrosion and
acid fumes. Stainless steel screws. Shockproof
and heat resistant tempered safety glass. Silicone
gaskets.
Installation: wall mounted
Accessories: optic lenses of different light beams,
shaped diaphragm for the blade of light
Power supply: 230V
POWER
LAMP
POWER
LAMP
LIGHTING
BEAM
[kg]
[kg]
LIGHTING
BEAM
CODE
INFO
CODE
MINITEN LED
BALTI
BALTI 220
BALTI 150
83
225
158
BALTI 80
163
166
153
48
46
56
BALTI 220
POWER
LAMP*
ANGLE OF
LIGHTING BEAM
[kg]
COLOUR
BALTI 220
INFO
CODE
INFO
CODE
INFO
CODE
*
BALTI 150
POWER
External LED luminaire with direct-indirect and
direct light distribution. Great for illumination of
promenades, halls, corridors, passages or alleys.
Materials: powder painted die-cast aluminum
with special antioxidant coating which ensures
height resistance from external factors. Diffuser
made of transparent thermoplastics. INOX screws.
Installation: wall mounted
Power supply: 230 V
LAMP*
ANGLE OF
LIGHTING BEAM
[kg]
COLOUR
BALTI 150
*
BALTI 80
POWER
BALTI 80
LAMP*
ANGLE OF
LIGHTING BEAM
[kg]
COLOUR
*
41
PN210
30
Aluminium housing, optic’s in UV resistant
transparent polycarbonate
Outdoor LED luminaire of IP65 degree of protection. Slim, elegant shape allows to use PN210 as a
main lighting for outdoor corridors, underground
passageways and arcades. High quality materials
are resistant to changing weather conditions and
UV radiation.
Built-in power supply allows for direct connection to 230V network.
Materials: housing made of die-cast aluminum,
protected with UV-proof, grey, white or black
polyester coating, decorative, transparent polycarbonate diffuser
Installation: ceiling mounted, wall mounted
Power supply: 230 V
210
POWER
LAMP
COLOUR
LIGHTING
BEAM
[kg]
CODE
PN210 LED 12W
ACHILLE
ACHILLE 320
15˚
ACHILLE 190
7˚
A drive-over recessed lighting luminaire with adjustable light angle; protection degree IP67.
Materials: ring of stainless steel, housing made
of black plastics; transparent, tempered glass, mat
on the circumference with a load from 2000 kg
up to 3000 kg (depending on the diameter of the
lighting luminaire).
Installation: recessed
Power supply: 230 V
42
POWER
ACHILLE 320 LED 22W
LAMP
[kg]
INFO
COLOUR
CODE
LITO
LITO 1200 – 2,5 m power cable included
120
160
235
284
MAXI LITO
LITO
LITO
154
210
Outdoor floodlight for LED light sources.
LITO and MAXILITO thanks to their compact
dimensions perfectly blend into the design of
facades where they can be hidden under the
cornices and behind columns. Delicate shape
of the luminaire allows for facade lighting without creating a visual impact on the historic or
aesthetic character of the building. At the same
time modern design can be used to highlight the
nature of futuristic office buildings by installing
luminaires in a direct line of sight. Adjustable tilt
angle of 220°.
Materials: body made of die cast aluminum protected by grey, UV-proof polyester coating, decorative diffuser made of transparent polycarbonate, wall bracket made of steel. Integrated feeder.
Installation: wall mounted, to the ground
Power supply: 230 V
55
220°
39
28
160
120
POWER
LAMP
[kg]
COLOUR
CODE
POWER
LAMP
[kg]
COLOUR
CODE
220°
MAXI LITO
LITO 12W
180
97
305
180
PIXEL
395
283
279
PIXEL CYC
450
Outdoor floodlight LED luminaire of modern and
elegant shape. Designed for newest LED modules
of high efficiency. Ideal for lighting facades, gardens, shopping malls, residential areas. Also perfect for illumination of streets, parks and squares.
Versions:
SM - supplied without lens to increase efficiency.
AS - asymmetrical lens with vertex at 50°.
ST - road lens with asymmetry vertex at 30°.
CYC - symmetric road lens ideal for cycle paths.
Materials: housing and frame of die cast aluminum with grooves for easier heat dissipation.
Covered with thermoset powder paint. 4 mm
thick tempered glass.
Installation: wall mounted, to the ground,
mounting bracket made of stainless steel
included.
Power supply: 230V
PIXEL ST
POWER
LAMP
[kg]
COLOUR
INFO
CODE
PIXEL AS
PIXEL SM
43
SOUL
Luminaire adapted for mounting to a Ø 60 mm pole
Street luminaires for LED sources. Application:
street and sidewalks lighting, squares, parking
lots, parks and other urban spaces.
Materials: housing made of die cast aluminum
protected by the thermosetting polyester coating. Reflector made of polished aluminum with
a purity of 99.85%. 4 mm thick tempered glass.
Installation: to the pole with possible 4 positions
of arrangement in range of 0-15°
Power supply: 230 V
44
POWER
SOUL LED 48W
LAMP
[kg]
COLOUR
INFO
CODE
45
industrial luminaires
46
MATRIUS LED
Available with emergency module
Housing made of high grade aluminum alloy
Construction resistant to corrosion
and poor environmental conditions.
Luminaire with increased tightness - IP65
LEDs of renowned manufacturers
of high luminous efficacy (up to 124 lm/W)
and color rendering index CRI>80
Narrow beam version 45°
with additional reflector
(IP65 only)
Optimal temperature conditions inside the
luminaire significantly extend the life time
of LEDs
Polycarbonate diffusor resistant to UV
radiation and large temperature differences
Possibility of adjustment of luminous flux.
Two light beam angles are available depending of height and surface of illuminated
area.
Smooth adjustment of fasteners spacing
Wide beam version
Sliding mounting brackets
Mounting rails
Easy in-line installation
47
FLASH LED
Two light beam angles are available depending of
height and surface of illuminated area
Possibility of adjustment of luminous flux
(dimmable version)
Extremely high light output of single luminaire
allows to optimize the illumination of large work
spaces
Temperatura barwowa światła 5000K
Color temperature equal 5000K
LEDs of renowned manufacturers
of high luminous efficacy (up to 120 lm/W)
High optical efficiency of luminaire is guaranteed
by Ledil optical systems used for each diode separately
Installation of LEDs on specially designed PCB blades
Easy installation
Trouble and maintanace-free operation of
Flash LED luminaires is provided by high
quality components with built-in security
systems:
- overload
- short-circuit
- overtemperature (thermal protection)
Power supplies of renowned producers ensures optimum working conditions of LEDs
h=2,5m
360°
3 - 12m
Possibility of installation of
external motion sensor for
single luminaire or group
of luminaires
Luminaire available with protective mesh
which allows to increase its mechanical
endurance up to IK10 degree
48
ALFA LED
Power supplies of reputable companies ensures optimum working conditions of light sources to guarantee
their long-time and trouble-free operation
Polished aluminum reflector ensures
adequate protection of electronic
components, aestetic appearance
and allows easy cleaning of the luminaires
h=2,5m
360°
Ribbed housing made of aluminum gives a suitable temperature
conditions necessary for long-term
trouble-free operation of LEDs
The entire structure is resistant to
corrosion which significantly extends
the life of the luminaire, even in the
adverse environment
Safe tempered glass provides high degree of protection (IP65) and protects
the light soruces from external factors
3 - 12m
Possibility of cooperation with external
motion sensors without affecting the
life of light source
LED light sources of renowned manufacturerss
• Light sources of high efficiency (up to 110lm/W)
• Low glare degree
• Light distribution adapter to the high
and lower spacer
• Instant light source ignition
• Ligh color temperaturę – 5000K
and CRI = 70
• Very high light output of a single luminaire
through which you can reduce the number
of light points needed to properly illuminate
the work surface
Suitable for suspension mounting on the chains
providing solid and safe exploitation
The use of Wieland’s quick connector enables easy
and fast installation
Special reflector placed directly on
the LED provides universal light distribution of the mulinaire
Optical system (Ledil) applied to each
LED separately guarantee high optical
efficiency of the luminaire
ALUMINUM RADIATOR
IS GIVING OPTIMUM OPERATING
CONDITIONS FOR LEDS
ENERGY EFFICIENT LIGHTING
49
POKER LS LED
87
75
Smooth adjustment of fasteners spacing
88
45W - 1170 mm
55W - 1470 mm
235
235
Industrial luminaire for LED light sources for inline installation. Luminaire has a simple way of
installation without use of additional tools. Thank
to LED it’s lighter, it’s exploitation is more energy
efficient. Aluminum reflector optimize light distribution. Designed for lighting service spaces,
warehouses and supermarkets.
POWER
Materials: housing made of steel electrostatically painted in white, reflector made of polished
aluminum
Installation: suspended
Accessories: suspension, suspension handle,
masking cover, end caps
Power supply: 230 V
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
INFO
CODE
*
MATRIUS
L
POWER
LAMP
62
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
Modern, hermetic luminaire with multiple functions. Perfect for lighting aisles, passageways,
storage areas, warehouses and all types of industrial spaces. MATRIUS is equipped with the latest
generation of LED sources closed in the aesthetic,
aluminum housing with IP54 or IP65 degree of
protection. Luminaire available either in narrow
or wide beam versions (45° available only in IP65
version of Matrius) Easy installation and smooth
adjustment of fasteners spacing.
Materials: aluminum profile, transparent PC plate
Installation: suspended, ceiling mounted
Power supply: 230 V
50
MATRIUS 35W 4000K
*
CODE
93
70
NOTE: chain visible on the photo
is not a part of the set with
a luminaire
FLASH LED
300
97
484
POWER
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
CODE
INFO
FLASH LED is a modern luminaire based on experience and popularity of our popular product
- FLASH. New version has been equipped with
special LED light sources designed for floodlights,
produced by reputable manufacturers. Due to the
long life of LED and maintenance-free character
of a luminaire it can be easily installed in a places
hard to reach. Additional accessories: frame with
mesh - IK10.
Application: gas stations, warehouses, industrial
areas and their immediate surroundings.
Materials: housing made of steel, electrostatically painted standard white, with possibility of
application of any RAL color; transparent tempered glass
Installation: on the ceiling; recessed
Accessories: frame with mesh (ceiling version),
masking frame (recessed version)
Power supply: 230 V
*
Frame with grid
FLASH LED 31°
Masking frame
Suspension
FLASH LED 49°
ALFA LED
Ø 40
316
666
150
Ø 60
497
High-Bay industrial luminaire designed for LED
light source with high lighting performance. Alfa
LED suits well to all kind of warehouses, manufacturing spaces, transportation routes and even
in to modern lofts.
Materials: grooved aluminum housing, polished
aluminum reflector, transparent tempered glass,
LED light source from reputable manufacturers,
additional reflector for LED light source, IP65
Wieland’s connector.
Installation: suspended
Accessories: protective grid
Power supply: 230V
POWER
ALFA LED 90 W
LAMP
LIGHT SOURCE'S
LUMINOUS
POWER*
LAMP
EFFICACY*
[kg]
COLOUR
ANGLE OF
LIGHTING BEAM
CODE
*
51
EMERGENCY AND EVACUATION
LUMINAIREs
52
VIP MASTER
VIP MASTER G/K
NM - non - maintained version
M - maintained version
NM AD - non - maintained version with autotest
M AD - maintained version with autotest
MAINS - mains 230V AC/DC
VIP MASTER
POWER
CODE
LAMP
EMERGENCY
MODE
[kg]
COLOUR
VIP MASTER PANEL G/K
One or double task emergency luminaire, available in versions with autotest, with central battery
connection or with DATA-S luminaire monitoring
system connection.
Materials: housing made of aluminum electrostatically painted in gray, diffusor made of PMMA.
Installation:
Surface mounted version: wall mounted, ceiling
mounted, suspended
G/K version: recessed in suspended G/K (gypsum
plasterboard) ceiling and ceilings 600x600 with
visible grid
Accessories: ceiling/suspending connector, wall
connector
Power supply: 230V AC/DC
VIP MASTER PANEL
POWER
LAMP
CODE
EMERGENCY
MODE
[kg]
COLOUR
53
LEGEND
CODE
product can be sold
on the European Union market
product code
light beam: direct (DI)
COLOUR
POWER
LAMP
light source wattage
protection degree
light beam: direct-indirect (DI-IN)
light source information
impact resistance level
dimension of the mounting hole
insulation class I
dimension of the mounting hole
insulation class II
rotation angle
[kg]
ANGLE
OF LIGHT BEAM
angle of light beam
EMERGENCY MODE working time in emergency mode
INFO
light beam: indirect (IN)
electronic ballast included
remarks
permissible static load
EUROPEAN
UNION ENERGY
LABEL
In accordance with EU Regulation 874/2012
relating to the labeling of luminaries we
wo-uld like to announce that FMP Lighting is
fully prepared to provide information about
the ener-gy efficiency of our products. In
order to fami-liarize yourself with the efficiency
we encourage you to visit our website and
contact our Export Department.
Luminaries with LED light sources in presented
catalog have an energy efficiencies at levels A+
and A.
This luminaire
contains built-in
LED lamps.
A+
A
B
C
D
E
L
E
D
The lamps cannot be changed
in the luminaire.
874/2012
INFO
The catalogue does not constitute an offer within
the meaning of the Civil Code and other relevant
laws.
54
Copying, modifying and reproduction of the
catalogue in any form: written, phonographic,
electronic and other, without permission, is prohibited. Reprint of excerpts or any other use of
materials available only with the consent of the
author.
Photos of the products shown in the catalogue
are illustrative and may differ from the product,
in fact.
The manufacturer reserves the right to change
the technical specifications or withdraw the
luminaire from production without prior notification.
We invite you to contact our representatives
WWW.FMP-AS.NO
HEADQUARTERS
FMP AS
Borggate 2-4
1608
FREDRIKSTAD
55
996 92 862
906 14 844
INFO@FMP-AS.NO