PRELIMINARY
High Definition
Oscilloscopes
HDO4000 and HDO6000
Key Features
Combining Teledyne LeCroy’s HD4096 high definition technology,
•
with long memory, a compact form factor, 12.1” multi-touch display
12-bit ADC resolution, up to
15-bit with enhanced resolution
•
200 MHz, 350 MHz, 500 MHz,
1 GHz bandwidths
•
•
•
•
Tools such as WaveScan Search and Find, LabNotebook Report
Generator, and History Mode help identify and isolate problems
for faster troubleshooting.
12.1” screen display
HD4096 Technology
More Signal Details
HD4096 high definition technology
Signal details often lost in the
consists of high sample rate 12-bit
noise are clearly visible and easy
ADCs, high signal-to-noise input
to distinguish when captured on
LabNotebook Documentation
amplifiers and a low-noise system
oscilloscopes with HD4096. Details
and Report Generation
architecture. This technology enables
which were previously difficult to
high definition oscilloscopes to
even see can now be easily seen and
capture and display signals of up to
measured. Using the oscilloscope
1 GHz with high sample rate and
zoom capabilities gives an even closer
16 times more resolution than other
look at the details for unparalleled
oscilloscopes.
insight to the signals on screen.
Clean, Crisp Waveforms
When compared to waveforms
Unmatched Measurement
Precision
captured and displayed by 8-bit
Precise measurements are critical for
oscilloscopes waveforms captured
effective debug and analysis. HD4096
with HD4096 technology are
enables oscilloscopes to deliver
dramatically crisper and cleaner.
unmatched measurement precision
Oscilloscopes with HD4096 acquire
to improve testing capabilities and
waveforms at high resolution, high
provide better results.
WaveScan – Advanced Search
History Mode – Waveform
Playback
•
•
•
ideal oscilloscopes for precise measurements and quick debug.
L
ong Memory – up to 250 Mpts/Ch
and Find
•
and powerful debug tools, the HDO4000 and HDO6000 are the
Spectrum Analyzer Mode
Power Analysis Software
Serial Data Trigger and Decode
sample rate and low noise to display
the most accurate waveforms.
full complement of powerful debug tools
Spectrum Analyzer Mode — Convert the controls
Power Measure and Analysis Software — Quickly
of the oscilloscope to those of a spectrum analyzer.
measure and analyze the operating characteristics of
Adjust the frequency span, resolution bandwidth and
power conversion devices and circuits with automatic
center frequency. Apply filtering to a signal and watch
loss measurements and a dedicated user interface. Areas
the frequency signature change in real time. A unique
of turn-on, turn-off and conduction loss are identified with
peak search labels spectral components and presents
color coded waveform overlay. Tools for performing criti-
frequency and level in a table. Touch any line to move to
cal power switching device measurements, control loop
that peak. Use the spectrogram display to see how your
modulation analysis, and line power harmonic testing are
spectrum changes over time.
all built in.
Touch Screen Simplicity — Efficient testing is enabled
History Mode Waveform Playback — Scroll back in time
with a thoughtfully designed user interface that provides a
using History Mode to view previous waveforms and iso-
smooth, transparent, and easy to use experience. Use the
late anomalies. Use cursors and measurement parame-
touch screen to quickly access all channels, triggers, math
ters to quickly find the source of problems. History mode
functions and measurement parameters.
is always available with a single button press, no need to
enable this mode and never miss a waveform.
2
PRELIMINARY
Serial Bus Trigger and Decode — Use the serial bus
LabNotebook Documentation and Report Generation
trigger to quickly isolate events on a bus eliminating the
Tool — LabNotebook provides a report generation tool
need to set manual triggers and hoping to catch the right
to save and document all your work. Saving all displayed
information. Protocol decoding is shown directly on the
waveforms, settings, and screen images is all done
waveform with an intuitive, color-coded overlay and pre-
through LabNotebook, eliminating the need to navigate
sented in binary, hex or ASCII. Decoding is fast even with
multiple menus to save all these files independently.
long memory and zooming in to the waveform shows pre-
Returning your oscilloscope to this exact state is only
cise byte by byte decoding.
one button press away with the flashback feature.
WaveScan Advanced Search and Find Tool —
Advanced Waveform Capture with Sequence Mode —
WaveScan allows searching in a single acquisition using
Use Sequence mode to store events as “segments”
more than 20 different criteria. Or, set up a scan condition
into memory. This can be ideal when capturing many
and scan for an event over hours or even days.
fast pulses in quick succession or when capturing events
separated by long time periods. Sequence mode provides
timestamps for each acquisition and minimizes dead-time
between triggers to less than 1 μs. Combine Sequence
mode with advanced triggers to isolate rare events over
time and analyze afterwards.
3
specifications
HDO4022
HDO4024
HDO4032
HDO4034
HDO4054
HDO4104
200 MHz
200 MHz
350 MHz
350 MHz
500 MHz
1 GHz
1 ns typical
4
700 ps typical
4
350 ps typical
4
Vertical
Bandwidth
(@ 50Ω)
Rise time
Input Channels
Vertical Resolution
DC Gain Accuracy
1.75 ns typical
1.75 ns typical
1 ns typical
2
4
2
12-bits; up to 15-bits with enhanced resolution (ERES)
±(0.5%) Full Scale, offset at 0 V
Acquisition
Sample Rate
(Single-shot)
Sample Rate
(Repetitive)
Record Length
2.5 GS/s
125 GS/s
Standard:12.5 Mpts/ch (all channels) 25 Mpts (interleaved)
Optional: 25 Mpts/ch (all channels), 50 Mpts (interleaved)
Trigger System
Trigger Types
Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate, |
Interval (signal or Pattern), Dropout, Qualified (State or Edge)
Display System
Display Size
Display Resolution
12.1” Wide TFT-LCD Touch-Screen
1280 x 800
Connectivity
Ethernet Port
USB Ports
GPIB Port
(Optional)
External Monitor
Port
Remote Control
(2) 10/100/1000Base-T Ethernet interface (RJ-45 connector)
(6) USB Ports Total – (2) Front USB Ports
Supports IEEE – 488.2
Standard 15-pin D-Type SVGA-compatible DB-15 connector, DVI connector and HDMI connector
Via Windows Automation, or via Teledyne LeCroy Remote Command Set
Measure, Zoom and Math Tools
Measurement
Parameters
Up to 8 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low), Delay, Delta
Period @ Level, Delta Time @ Level, Duty, Duty @ Level, Edge @ Level, Fall Time (90%–10%), Fall Time (80%–20%), Frequency,
Frequency @ level, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Peak-Peak, Period, Period @ Level, Phase, Rise Time
(10%–90%), Rise Time (20%–80%), RMS, Skew, Standard Deviation, Time @ Level, Top (High), Width+, Width-. Measurements
can be gated. Graphical Equation Editor Included
Zooming
Math Functions
Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.
Functions include Sum, Difference, Product, Ratio, Absolute Value, Averaging (summed and continuous), Derivative, Envelope,
Enhanced Resolution (to 11-bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units), Roof, Square, Square Root,
Trend and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and FlatTop windows). 2 math functions may
be defined at a time. 2 math functions may be chained together. Graphical Equation Editor Included.
Physical
Dimensions (HWD)
Weight
4
11.48”H x 15.72”W x 5.17“D (291.7 mm x 399.4 mm x 131.31 mm)
5.71 kg (12.6 lbs)
specifications
PRELIMINARY
HDO6034
HDO6054
HDO6104
350 MHz
500 MHz
1 GHz
700 ps typical
350 ps typical
Vertical
Bandwidth
(@ 50Ω)
Rise time
Input Channels
Vertical Resolution
DC Gain Accuracy
1 ns typical
4
12-bits; up to 15-bits with enhanced resolution (ERES)
±(0.5%) Full Scale, offset at 0 V
Acquisition
Sample Rate
(Single-shot)
Sample Rate
(Repetitive)
Record Length
2.5 GS/s
125GS/s
Standard: 50 Mpts / ch
Optional: M Option - 150 Mpts/ch, L Option - 250 Mpts/ch
Trigger System
Trigger Types
Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate,
Interval (signal or Pattern), Dropout, Qualified (State or Edge)
Display System
Display Size
Display Resolution
12.1” Wide TFT-LCD Touch-Screen
1280 x 800
Connectivity
Ethernet Port
USB Ports
GPIB Port
(Optional)
External Monitor
Port
Remote Control
(2) 10/100/1000Base-T Ethernet interface (RJ-45 connector)
(6) USB Ports Total - (2) Front USB Ports
Supports IEEE – 488.2
Standard 15-pin D-Type SVGA-compatible DB-15 connector, DVI connector and HDMI connector
Via Windows Automation, or via Teledyne LeCroy Remote Command Set
Measure, Zoom and Math Tools
Measurement
Parameters
Zooming
Math Functions
Up to 8 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low), Cycles, Delay,
Delta Delay, Delta Period @ Level, Delta Time @ Level, Delta Time @ Level from trigger, Duration, Duty, Duty @ Level, Edge @
Level, Fall Time (90%–10%), Fall Time (80%–20%), Fall @ Level, First, Frequency, Frequency @ level, Last, Level @ X, Maximum,
Mean, Median, Minimum, Num Points, Overshoot+, Overshoot-, Peak-Peak, Period, Period @ Level, Phase, Rise Time (10%–90%),
Rise Time (20%–80%), Rise @ Level, RMS, Skew, Standard Deviation, Time @ Level, Top (High), Width+, Width-, X @ max, X @
min. Measurements can be gated. Graphical Equation Editor Included
Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.
Functions include Sum, Difference, Product, Ratio, Absolute Value, Averaging (summed and continuous),
Correlation (two waveforms), Cubic Interpolation, Derivative, Deskew, Envelope, Enhanced Resolution (to 15-bits), Exp (base e),
Exp (base 10), Floor, Histogram, Integral, Interpolate (cubic, quadratic, sinx/x), Invert, Log (base e), Log (base 10), Reciprocal, Rescale (change scale and units), Roof, Sinx/x, Sparse, Square, Square Root, Track, Trend and FFT (up to 250 Mpts, power spectrum
output and rectangular, VonHann, and FlatTop windows). 8 math functions may be defined at a time, 2 functions may be chained
together. Graphical Equation Editor Included.
Physical
Dimensions (HWD)
Weight
11.48”H x 15.72”W x 5.17“D (291.7 mm x 399.4 mm x 131.31 mm)
5.71 kg (12.6 lbs)
5
Customer Service
Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our
digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes:
• No charge for return shipping
• Long-term 7-year support
• Upgrade to latest software at no charge
1-800-5-LeCroy
teledynelecroy.com
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
© 2012 Teledyne LeCroy. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
hdo40006000-ds-31aug12
PDF