Updated fitting with a built-in terminal box that permits the use of the existing conduit
Updated fitting
Existing fitting
Approved items of flameproof lighting fitting
The lamp fitting, suspension pipe, and terminal box are approved
as a package.
Replacement of existing lighting fitting as per explosion protection recommended practices
Since the lamp fitting, suspension pipe, and terminal box are approved,
the terminal box connected to the mains must also be replaced.
Approved items
Lamp fitting with a built-in terminal box is approved.
SEIWA offers industrial lighting products with high Japanese quality
Terminal box
Suspension
pipe
Lamp fitting
The explosion protection recommended practices state that connection of an electrical apparatus
with an external conductor should
be made inside a terminal box.
Terminal
box
Approved items
Lamp fitting
→Recommended practices for explosionprotected electrical installations in general
industries (gases and steam explosion protection 2006) "2141 Method of connecting
an electrical apparatus with an external
conductor"
Since the lamp fitting with a built-in terminal box is approved,
the existing terminal box on the conduit need not be removed.
Removal
Left intact
Replacement
Removal
Replacement
Removal
Removal of old fitting
Left intact
Installation of new fitting
Point to notice
Installation completed
Explosion proof type Lighting Fittings
Explosion proof type Control Boxes
Left intact
Removal of old fitting
Installation of new fitting
Point to notice
Installation completed
The mains conduit
must be removed.
The mains conduit
need not be removed.
Increase in replacement
work cost and man-hours
Substantial reduction
in replacement work
cost and man-hours
Note: For use of the existing conduit, the mounting pipe of the old fitting must fit the new fitting.
If the pipe size is not suitable, consult us.
A broad lineup of terminal box built-in products for retrofitting!
Explosion proof type LED lighting fittings
LGAA /LGLA series
Terminal box
built-in type
available
←See this mark
on the inside pages of this brochure.
Explosion proof type fluorescent lighting fittings
AGAC /TGAC series
The information in this brochure is as of May 2013. It is subject to change without notice.
SEIWA ELECTRIC MFG. CO., LTD.
This brochure is printed in eco-friendly
vegetable-oil based ink.
For ordering or further information, contact us.
http:// www.seiwa.co.jp
Head Office:
36, Shin-ike, Terada, Joyo, Kyoto Prefecture, 610-0192 Japan
Tel.81-774-55-8181 Fax.81-774-58-2034
ECOLOGY
for the Earth
Environment
Tokyo Branch:
Izumikokusaisangyo Bldg, 3-3 Kanda-Mitoshirocho, Chiyoda-ku, Tokyo, 101-0053 Japan
Tel.81-3-5217-2111 Fax.81-3-5217-2112
2013.5 （2 ）SO
SEIWA’s LED lighting fitting series PERLE PUR contributes to eco-friendly
society through environmental load reduction in four factors:
Co2 emissions, power consumption, maintenance cost, and waste.
SEIWA occupies a leading position
in the flameproof lighting fitting industry
through many achievements in Japan and abroad.
Since its foundation in 1945, SEIWA ELECTRIC MANUFACTURING Co., Ltd. has delivered industrial lighting fittings, road and
tunnel lighting fittings, and street and landscape lighting fittings to many customers. Particularly in the factory/plant
industrial lighting field, we have supplied flameproof lighting fittings suitable for any environment and conditions,
enjoying a high reputation for the safety and reliability of our products in Japan and foreign countries. Also we were quick
to enter into the optoelectronics field. We have succeeded in uniquely developing blue light emitting diodes. Today we
have a mass production system for various LED devices and continue to expand the lineup of LED lighting fittings. SEIWA's
industrial lighting fittings, which are based on self-developed LED devices and manufactured by our integrated production
system, are offering security and safety to enrich your daily lives.
History of SEIWA's industrial lighting business
2011
2010
●LED products for lighting
LED & Lighting
●Information display systems
●Road/tunnel lighting fittings
In the information display system field, we supply a wide range
of products as communication tools in the advanced information society including information display systems for roads and
rivers, tunnel disaster prevention systems, LED information
displays, and LED traffic lights. In the lighting field, we have
plenty of experience in lighting for ordinary roads, expressways,
tunnels, and landscapes.
Introduced a lineup of LED lighting fittings series. Flameproof high-frequency
fluorescent lighting fittings (ANPA) received Chinese certification (CQST).
2007
CHANGSHU SEIWA ELECTRIC Co., Ltd. started the production and sale of
flameproof lighting products. Flameproof high-frequency fluorescent lighting
fittings (AZAC) received Chinese certification (NEPSI).
Three-band white LED
2003
Blue LED
2002
2000
●Noise suppression products
●Cable protection products
●LED module products
In the noise suppression field, we develop and manufacture
products for shielding or preventing electromagnetic noise
which is increasing with the spread of digital devices.
As for cable protection products, since the introduction of the
“Cutting Duct” series in 1963, we have maintained our position
as a pioneer in the field, offering various eco-friendly and
user-friendly cable accessories. In addition, we utilize our LED
development technology to supply LED modules which meet any
customer needs.
Introduced a lineup of flameproof high-frequency lighting fittings series.
ISO14001 certificate
Acquired ISO9001 certification.
Flameproof Hf fluorescent
lighting fitting
1973
Component
Acquired ISO14001 certification.
Started the sale of blue LEDs.
Launched the world's thinnest blue chip LEDs (surface-mount type).
1999
1958
Flameproof fluorescent lighting fittings and high-intensity discharge lighting
fittings received Chinese certification (NEPSI).
Developed three-band white LEDs.
Changshu Seiwa Electric Co., Ltd.
1989
In the industrial lighting field, we have long supplied lighting
fittings for use in harsh environments such as explosive
atmospheres of plants and oil refineries.
Based on high technical expertise, we continue to expand the
lineup of LED lighting products including flameproof products
to suit any production site condition.
Developed barrier-free LED's.
Increased safety LED lighting fittings
2006
Social Systms
●Industrial lighting fittings
New LED building
2008
2004
Head Office of SEIWA Electric Mfg. Co., Ltd.
The new LED factory building with LED facilities went into full-scale operation
in April 2011.
Kanmon Undersea Tunnel
ISO9001 certificate
Introduced a lineup of IEC-compliant flameproof lighting products.
The waterproof fluorescent lighting fittings factory was approved as a JIS factory.
Developed flameproof fluorescent lighting fittings first in Japan.
1957
Delivered lighting fittings for the Kanmon Tunnel (Japan's first undersea tunnel).
Tunnel lamp
1955
1950
1949
Japan's first waterproof fluorescent lighting fitting
GM type socket
Developed increased-safety fluorescent lighting fittings first in Japan.
Delivered waterproof fluorescent lighting fittings first in Japan and introduced
the
brand
Developed GM type sockets (waterproof type sockets).
SEIWA ELECTRIC MANUFACTURING Co., Ltd. was established.
LGBA series
●Dimensions ＊Pipe Pendant (short)
●Light Distribution
(in mm)
□120
(in cd/1000 m)
55
150°
35
120°
90°
190
300
90°
100
200
60°
998
Exed B ＋H2T4
Mounting
Type
1
IP 65
2
Lamp Life
3
60,000 h
4
○ Pipe Pendant (short)
○ Pipe Pendant
○ Bracket
○ Special Pipe Pendant
− Pipe Mounting
○ Stanchion
Explosion proof type LED Lighting Fittings
■Equivalent to an incandescent 100W lamp
LGLA series
5
6
7
AC100∼240V
50/60Hz
66.5W（66W type）/45W
（44W type）
6,650 lm（66W type）/4,550 lm
（44W type）
100 lm/W
（66W type）/101 lm/W
（44W type）
White LED
5,000 K
8
9
10
11
12
13
14
(in mm)
(in cd/1000 m)
150°
295
90°
90°
100
200
Mounting
Type
Lamp Life
40,000 h
2
Terminal box
built-in type
3
4
available
○ Pipe Pendant (short)
○ Pipe Pendant
○ Bracket
− Special Pipe Pendant
− Pipe Mounting
○ Stanchion
Explosion proof type LED Lighting Fittings
for Inside Inspection
5
6
7
AC100∼220V DC100 ∼110V
50/60Hz
17W（AC power）/15W
（DC power）
1,050 lm
60 lm/W
（AC power）/ 70 lm/W
（DC power）
White LED
5,000 K
■Equivalent to an incandescent 100 W lamp
for inside inspection
13
14
(in cd/1000 m)
150°
180°
150°
5
6
7
Terminal box
built-in type
○ Pipe Pendant (short)
Mounting
Type
3
available
○ Pipe Pendant
4
○ Bracket
○ Special Pipe Pendant
5
○ Pipe Mounting
6
○ Stanchion
7
1000
60°
218
AC100∼200V,200 ∼240V
50/60Hz
22W
900 lm
41 lm/W
White LED
5,000 K
60°
1500
30°
2000
9
10
11
12
13
14
LZIA series
(in mm)
Ra 65
IP 65
Exde CT5
Aluminum alloy
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entry: one way
Approx.4.0kg
Controller support
LZIA33040（Separate Control Unit ）
LZIA33049（Built-in Control Unit ）
120°
90°
310
90°
50
100
60°
372
Hazardous Area
Zone 2
Mounting
Type
1
FML36EX
Degree of protection
IP 65
2
Type of protection
ExnAd B ＋H2T4
○ Pipe Pendant (short)
○ Pipe Pendant
150°
120°
ＴＧＡＣ361
Lamp
180°
3
Terminal box
built-in type
4
available
○ Bracket
○ Special Pipe Pendant
− Pipe Mounting
○ Stanchion
Explosion proof type Fluorescent
5
6
7
AC100∼242V
50/60Hz
35W
2,900 lm
83 lm/W
Fluorescent Lamp
5,000 K
A−A
B−B
8
9
10
11
12
13
14
60°
150
30°
282
200
(in cd/1000 m)
Hazardous Area
Degree of protection
Zone1/ 2
IP 65
Type of protection
●Protection Guard
（option）
1
2
Lamp Life
3
60,000 h
Exde B ＋H2T6X
4
○ Pipe Pendant (short)
Mounting
Type
○ Pipe Pendant
○ Bracket
○ Pole Mounting
5
− Pipe Mounting
6
○ Stanchion
7
Vaper Tight Type LED Lighting Fittings
for Inside Inspection
120°
90°
90°
100
200
●Mounting bracket (option)
1
2
Lamp Life
3
4
5
6
7
8
9
10
11
12
13
14
Ra 70
IP 65
Exde B＋H2T6X
Aluminum alloy casting
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entries: 4 ways with 3 plugs
Approx. 22kg（LZIA3304941）
●Light Distribution
(in cd/1000 m)
12
150°
122
Certified by the National Supervision and Inspection Centre for Explosion
Protection and Safety of Instrumentation (NEPSI ).
Mounting
Type
10
11
12
30°
13
14
Aluminum alloy
Melamine resin baking finish Approximate Munsell color 10YR7/1
Approx. 2.5kg
13 Entries
8 General Color Rendering Index 11 Body Material
14 Weight
Finish
Excellent in corrosion-resistance, robustness, and air and water tightness.
●Dimensions ＊Pipe Pendant (short)
●Light Distribution
(in mm)
□120
(in cd/1000 m)
55
150°
180°
150°
120°
120°
90°
90°
50
100
60°
1342
1
FHF32EX
2
ExdnA B ＋H2T3X
○ Pipe Pendant
9
9 Degree of Protection 12
Distribution on the plane vertical to the pipe axis
Distribution on the plane horizontal to the pipe axis
○ Pipe Pendant (short)
60°
1500
Ra 65
IP 65
8
6 Light Source
8
IP 65
1000
2000
2500
0°
3 Power Consumption
30°
Zone 2
90°
30°
7 Correlated Color Temperature 10 Type of Protection
5 Energy Efficiency
120°
60°
AC100∼200V,200 ∼240V
50/60Hz
22W
900 lm
41 lm/W
White LED
5,000 K
AＧＡＣ452（two 45W Lamps ）
AＧＡＣ322（two 32W Lamps ）
Type of protection
150°
500
4 Lamp Flux
AGAC series
Degree of protection
180°
90°
1 Rated Voltage
Explosion proof type Fluorescent
Lighting Fiitings
Hazardous Area
30°
500
0°
AC100∼240V
50/60Hz
144W
12,050 lm
83 lm/W
White LED
5,000 K
(in mm)
40,000 h
Lamp
400
120°
250
0°
Ra 84
IP 65
ExnAd B＋H2T4
Aluminum die casting
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entries: 4 ways with 3 plugs
Approx. 8.5kg（TGAC36141/TGAC36146）
60°
300
φ398
●Dimensions
LCTC 19181
IP 65
150°
Easy to replace an existing incandescent lighting fitting with this product.
■Equivalent to an incandescent 100 W lamp
for inside inspection
Degree of protection
180°
120°
190
335
150°
●Light Distribution
35
TGAC series
(in cd/1000 m)
14
60°
2 Frequency
●Light Distribution
13
150°
120°
Provided with an inverter to ensure higher efficiency and save more energy
than when a copper-iron ballast is used.
(in mm)
11
12
450
30°
Explosion proof type Fluorescent Lighting Fiitings
●Dimensions ＊Pipe Pendant (short)
10
500
0°
Ra 65
IP 65
Exed B＋H2T4
Aluminum die casting
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entries: 4 ways with 3 plugs
Approx. 9kg（LGAA06641V2）
●Dimensions ＊Pipe Pendant (short)
Note: The recommended replacement frequency of flameproof lamps is every 15 years and their useful life is 20 years (ambient temperature 30℃, 10 hrs of lighting per day, 3000 hrs of lighting per year)
Explosion proof type Fluorescent
Lighting Fiitings
9
30°
Brightness equivalent to a 400 W mercury vapor lamp.
2500
0°
8
8
400
Distribution on the plane vertical to the pipe axis
Distribution on the plane horizontal to the pipe axis
φ197
4
60,000 h
Exed B ＋H2T4
AC100∼200V,200 ∼240V
50/60Hz
36.5W（33W type）/25.5W（22W type）
3,100 lm（33W type）/2,100 lm
（22W type）
85 lm/W
（33W type）/82 lm/W
（22W type）
White LED
5,000 K
6.5
3
Lamp Life
Type of protection
2
A−A
B−B
60°
300
30°
R7
Lamp Life
40,000 h
90°
500
9
2
120°
90°
R7
Exde CT5
12
Ra 65
IP 65
Exed B＋H2T4
Stainless steel
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entries: 4 ways with 3 plugs
Approx. 5kg（LGLA150142）
12
158
Type of protection
1
°
1
IP 65
18.5
120°
●Mounting bracket (option)
IP 65
11
200
30°
●Light Distribution
φ102
Zone1/ 2
10
φ178
158
60
Degree of protection
9
90°
100
282
φ107
LZTA 19181
Hazardous Area
8
●Dimensions
(in mm)
Degree of protection
Zone 1/2
150°
120°
60°
Hazardous Area
180°
90°
30°
A solution to all problems inherent in existing products with incandescent lamps.
°
Exed B ＋H2T4
1
IP 65
LGAA066（33W type）
LGAA064（22W type）
500
0°
60
Type of protection
Degree of protection
400
150°
60°
300
30°
φ196
Zone 1/2
150°
120°
60°
Hazardous Area
180°
(in cd/1000 m)
120°
■Equivalent to a 400W mercury vapor lamp
●Light Distribution
120°
LGLA1501
LGAA series
●Light Distribution
(in mm)
Explosion proof type LED Lighting Fittings
Japan's first product operable on both AC and DC power.
●Dimensions ＊Pipe Pendant (short)
●Dimensions ＊Pipe Pendant (short)
372
Ra 65
IP 65
Exed B＋H2T4
Aluminum die casting
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entries: 4 ways with 3 plugs
Approx.11.5kg（LGBA061241V2）
14 Weight
Finish
Compact, highly robust and durable and easy to install.
30°
Distribution on the plane vertical to the pipe axis
Distribution on the plane horizontal to the pipe axis
110
Type of protection
Degree of protection
25
Zone 1/2
9 Degree of Protection 12
500
0°
200
A−A
B−B
400
6 Light Source
13 Entries
8 General Color Rendering Index 11 Body Material
60°
300
30°
Explosion proof type LED Lighting Fittings
■Equivalent to one FHF32W (high power) lamp
150°
120°
LGBA0612（66W type）
LGBA0608（44W type）
Hazardous Area
180°
7 Correlated Color Temperature 10 Type of Protection
5 Energy Efficiency
3 Power Consumption
Higher brightness than fluorescent lamps and compact aluminum die casting.
4 Luminous Flux
310
■Equivalent to two FHF32W (high power) lamps
Mercury-free
2 Frequency
442
Explosion proof type LED Lighting Fittings
Long Life
1 Rated Voltage
Low Insectattractiveness
40
Energy Saving
Free of UV/IF
rays
240
LED Lighting Fittings
Full Lineup of Flameproof LED Lighting Products
3
Terminal box
built-in type
4
available
○ Bracket
○ Special Pipe Pendant
− Pipe Mounting
○ Stanchion
Explosion proof type Fluorescent
5
6
7
30°
180
8
AC100∼242V
9
50/60Hz
91W（two 45W Lamps）69W（two 32W Lamps） 10
4,950 lm×2（two 45W Lamps）3,520 lm×2（two 32W Lamps） 11
109 lm/W（two 45W Lamps）102 lm/W（two 32W Lamps） 12
13
Fluorescent Lamp
14
5,000 K
A−A
B−B
60°
150
200
30°
250
0°
Distribution on the plane vertical to the pipe axis
Distribution on the plane horizontal to the pipe axis
Ra 84
IP 65
ExdnA B＋H2T3X
Aluminum die casting
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entries: 4 ways with 3 plugs
Approx. 13.5kg（AGAC45241）
Certified by the China National Quality Supervision and Test Centre for
Explosion Protected Electrical Products (CQST).
40
Hazardous Area
IP 65
Type of protection
Exde CT5
○ Pipe Pendant (short)
Mounting
Type
1
YZ32RZ /G-HF
Degree of protection
Zone1/ 2
○ Pipe Pendant
1386
2
●Protection Guard
（option）
3
4
○ Bracket
○ Special Pipe Pendant
− Pipe Mounting
○ Stanchion
5
6
7
9
10
11
12
13
14
Lighting Fiitings
150°
120°
90°
50
100
60°
60°
150
30°
A−A
B−B
8
180°
90°
188
AC100∼242V / AC220Ｖ
50/60Hz / 50Ｈz
91W（two 45W Lamps）69W（two 32W Lamps）
4,950 lm×2（two 45W Lamps）3,520 lm×2（two 32W Lamps）
109 lm/W（two 45W Lamps）102 lm/W（two 32W Lamps）
High-frequency Fluorescent Lamp
5,000 K
150°
120°
696
12
FHF32EX
176
156
170
AZＡＣ452（two 45W Lamps ）
AZＡＣ322（two 32W Lamps ）
Lamp
(in cd/1000 m)
200
327
40
1292
Ra 84
IP 65
Ｅｘｄｅ ＣＴ５
Body: Aluminum alloy, Lamp protective cover: Hard glass
Approximate Munsell color 10YR7/1
M20×1.5
Approx. 13kg
150°
180°
Hazardous Area
Zone2
Mounting
Type
1
YZ32RZ /G-HF YZ36RZ
Degree of protection
IP 65
2
Type of protection
3
ＥｘnAｄ ＣＴ4
○ Pipe Pendant (short)
○ Pipe Pendant
4
○ Bracket
○ Special Pipe Pendant
− Pipe Mounting
○ Stanchion
120°
90°
90°
100
60°
5
6
7
8
AC100∼242V / AC220Ｖ
9
50/60Hz / 50Ｈz
90W（two 45W Lamps）73W（two 36W Lamps） 10
4,700 lm×2（two 45W Lamps）2,520 lm×2（two 36W Lamps） 11
104 lm/W（two 45W Lamps）69 lm/W（two 36W Lamps） 12
13
High-frequency Fluorescent Lamp
14
5,000 K
A−A
B−B
Ra 84
IP 65
ＥｘnAd ＣＴ4
Body: GRP, Cover: Polycarbonate
ＲＡＬ7032
M20×1.5
Approx. 5.5kg
NZAB series
A highly efficient high-pressure sodium vapor lamp that ensures high cost
performance.
●Dimensions
327
●Light Distribution
(in mm)
＊Pipe Pendant (short)
(in cd/1000 m)
150°
120°
90°
90°
Lamp
Hazardous Area
Zone1/ 2
取付形状
1
CM360 ∼190F・L
Degree of protection
IP 65
Type of protection
Exde B ＋H2T3X
○ Pipe Pendant (short)
○ Pipe Pendant
2
●Protection Guard
（option）
3
4
○ Bracket
− Special Pipe Pendant
○ Pole Mounting
○ Stanchion
5
6
7
AC 200V 220V 230V 240V
50/60Hz
390W（CM360F・L）
37,000lm（CM360F・L）
94.9 lm/W
（CM360F・L）
Ceramic Metal Halide Lamp
4,000 K
Explosion proof type Control Boxes
One-unit wall-mounted type
ZE1A
Two-unit wall-mounted type
ZE2A
Type of protection
Type of protection
Type of protection
Degree of protection
Degree of protection
Degree of protection
Six-unit wall-mounted type
Nine-unit wall-mounted type
IP 65
ZE6A
Exde CT5
12
13
14
Exde CT5
IP 65
ZEBA
取付形状
Degree of protection
IP 65
Type of protection
Exde B ＋H2T3X
○ Pipe Pendant (short)
○ Pipe Pendant
●Protection Guard
（option）
Degree of protection
Degree of protection
Exde CT5
4
○ Bracket
− Special Pipe Pendant
○ Pole Mounting
○ Stanchion
Control Units for Control Box
6
7
9
IP 65
10
11
12
13
14
For a combination of control units and their specifications, please feel free to consult us.
Pushbutton Switch
Pin Lock
Pushbutton Switch
Push Lock
Pushbutton Switch
Indicator
Selector Switch
Keyed Selector
Switch
Cam Switch
Buzzer
Variable Resistor
Fail-safe Guard
Fail-safe Cover
(Switch Type)
IP 65
Flameproof Circuit Breaker
Flameproof Motor Breaker
ZBP・ZMBP
Explosionproof Cable Gland
ZCGS
SEIWA ELECTRIC MFG. CO., LTD.
http:// www.seiwa.co.jp
Head Office:
36, Shin-ike, Terada, Joyo, Kyoto Prefecture, 610-0192 Japan
Tel.81-774-55-8181 Fax.81-774-58-2034
You can use this brochure as a poster.
Type of protection
d2G5
＊Information in this brochure is as of May 2013. It is subject to change without notice.
Type of protection
Exd BT5
This brochure is printed in eco-friendly
vegetable-oil based ink.
30°
Ra 25
IP 65
Body:Ｅｘｄｅ B ＋H2T3X Ballast: Ｅｘsｅ T4X
Aluminum alloy
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entries: 4 ways with 3 plugs
Approx. 18.0kg（NZAB36941 200V ）
Ammeter/
Frequency Meter
Tokyo Branch:
Izumikokusaisangyo Bldg, 3-3 Kanda-Mitoshirocho, Chiyoda-ku, Tokyo, 101-0053 Japan
Tel.81-3-5217-2115 Fax.81-3-5217-2112
d2G5
5
8
Exde CT5
Other Devices
Type of protection
3
AC 200V 220V 230V 240V
50/60Hz
390W（NH360F・L）
45,000 lm（NH360F・L）
115 lm/W
（NH360F・L）
High-pressure Sodium-Vapor Lamp
2,050 K
24-unit wall-mounted type
Degree of protection
ZERA
ZS
Zone1/ 2
2
ZECA
Type of protection
Flameproof Type Plug Socket
Stanchion type available.
Hazardous Area
IP 65
Type of protection
IP 65
11
1
NH360∼180F・L
100
125
0°
φ298
Lamp
60°
75
30°
Zone1/ 2
Type of protection
Exde CT5
10
Ra 85
IP 65
Body:Ｅｘｄｅ B ＋H2T3X Ballast: Ｅｘsｅ T4X
Aluminum alloy
Melamine resin baking finish Approximate Munsell color 10YR7/1
Entries: 4 ways with 3 plugs
Approx. 18.0kg（SZAB36941 200V ）
ZE5A
Hazardous Area
Exde CT5
9
Five-unit wall-mounted type
Hazardous Area
Zone1/ 2
8
50
60°
30°
Used to control the power supply for a pump or mixer in a hazardous
area where explosion or corrosion may occur.
Hazardous Area
Zone1/ 2
60°
75
125
0°
φ298
150°
25
50
100
180°
120°
90°
30°
30°
250
0°
25
60°
60°
150
200
Distribution on the plane vertical to the pipe axis
Distribution on the plane horizontal to the pipe axis
120°
90°
150°
Explosion proof typef High-Pressure Sodium Vapor Lighting Fittings
150°
120°
852
Lamp
180°
120°
174
250
0°
(in cd/1000 m)
150°
50
Distribution on the plane vertical to the pipe axis
Distribution on the plane horizontal to the pipe axis
●Light Distribution
(in mm)
＊Pipe Pendant (short)
ANPA452（two 45W Lamps ）
ANPA451（one 45W Lamp ）
ANPA362（two 36W Lamps ）
ANPA361（one 36W Lamp ）
(in cd/1000 m)
176
150
30°
High-brightness lamp that provides higher efficiency and color rendering
index and longer life than a mercury vapor lamp.
●Dimensions
ANPA series
●Light Distribution
(in mm)
30°
Explosion proof type Ceramic Metal Halide Lighting Fittings
SZAB series
●Dimensions ＊Special Pipe Pendant
122
AZAC series
●Light Distribution
(in mm)
40
●Dimensions ＊Special Pipe Pendant
852
Lighting Fiitings
For ordering or further information, please contact us.