2:
5:
SYS19: BASE2
PDFINFO
50:
95:
98:
JOB: CRMAIN06-0759-1 Name: 3L-759
100:
DATE: JAN 19 2006
Time: 5:48:51 PM Operator: JB
COLOR: CMYK
TCP: 15001
Typedriver Name: TS name csm no.: 100
VMV High Voltage Luminaires Ordering by Components
3L
VMV High Wattage Luminaires are available in components
A complete luminaire consists of:
I.
Champ Cover (mounting module)
II.
VMV Ballast Housing - Include voltage and required option(s)
III.
Optical & Guard Components - Globe, Reflector, Refractor, Guard
I. Champ Cover (Mounting Module):
Type
Pendant
Ceiling
Wall
Stanchion - 25 Degree Angle
Stanchion - Straight
Quad-Mount
Conduit
3⁄4
1
3⁄4
1
3⁄4
1
11⁄2
11⁄2
3⁄4
Cat. No.
APM2
APM3
CM2
CM3
TWM2
TWM3
JM5
PM5
QM25
II. Ballast Housings. Complete catalog number must have the voltage suffix (MT shown) and any options suffixes.
Lamp Type
High Pressure Sodium
Metal Halide
Mercury Vapor
Lamp
Watts
Catalog Number
200
250
400
70
250
400
250
400
VMVS200/MT
VMVS250/MT
VMVS400/MT
LMVM070/MT
VMVM250/MT
VMVM400/MT
VMVC250/MT
VMVC400/MT
III. Globe, Refractors, Reflectors, Guards
Type
Globe
Globe Guard
Reflector-Dome
Reflector-Angle
Refractor - Type 2
Refractor - Type 5
Refractor Guard
High Bay Reflector/Lens
Catalog Number
G303
P33
RD739
RA739
GR302
GR305
P23
GRD4
US: 1-866-764-5454
STIBOINFO((CRH:66008com:3L:759))
CH0 3 L - 3 5
CAN: 1-800-265-0502
Copyright© 2006 Cooper Crouse-Hinds
759
Zoom: 100
2:
5:
SYS19: BASE2
PDFINFO
50:
95:
98:
JOB: CRMAIN06-0754-7 Name: 3L-754
3L
100:
DATE: JAN 19 2006
Time: 5:48:44 PM Operator: RB
200-400W VMV High
Wattage Series
Champ® H.I.D. Luminaires
Application:
Features:
ɀ Cast copper-free aluminum construction
(less than 0.4 of 1% copper) and epoxy
powder finish provide excellent resistance to
corrosion
ɀ Six mounting arrangements to suit any
lighting layout – pendant, ceiling, wall
bracket, angle stanchion, straight stanchion
and quad-mount.
ɀ Wide range of light sources and wattages
to meet specifiers needs: 200, 250, 400 watt
high pressure sodium (HPS); 250 and 400
watt mercury vapor (MV); 250 and 400 watt
metal halide (MH)
ɀ Hinged ballast housing for ease of
installation and maintenance
ɀ Wide choice of photometric distributions.
Glass globes, glass refractors, and reflector/
lens are available
ɀ All luminaires designed to perform in a
40° C ambient temperature. Selected
luminaires are suitable for ambient
temperatures up to 65°C.
ɀ Superior gasketing seals between the
mounting module, housing, and optical
assembly for optimum performance in wet
and corrosive environments.
ɀ Hubs with integral conduit stop and
bushing to help prevent damage to field
wiring during installation
ɀ Low ambient capability to (–40°C)
ɀ Dome and 30° angle reflectors made of
bright white Krydon® material and etched
Alzak® high bay reflectors provide superior
reflectivity
ɀ Grounding wire for safety
ɀ High power factor ballasts (Min. P. F. 90%)
are available in a variety of voltages to meet
local area requirements.
ɀ Mogul base lamp socket
STIBOINFO((CRH:66008com:3L:754))
CH0 3 L - 2 1
ɀ
Cl. I, Div 2, Groups A, B, C, D
Restricted Breathing Cl. I, Div 2 &
Zone 2 (Suffix S826)
ɀ Certified for IEC Zone 2
(Suffix S826TB)
ɀ
TCP: 15001
Typedriver Name: TS name csm no.: 100
ɀ
Cl. II Groups E, F, G, Cl. III
& Simultaneous Presence
(with Glass Refractor)
ɀ Marine (with Globe or Glass
Refractor) & Wet Locations
ɀ 3, 3R, 4, 4X; IP66
Standard Materials:
VMV high wattage series Champ luminaires
are used:
ɀ in manufacturing plants, refineries,
chemical, petrochemical, and other industrial
process facilities, waste or sewage treatment
facilities, and other heavy industrial
applications
ɀ in applications involving medium and high
mounting heights
ɀ in applications where energy efficient, high
lumen output is required
ɀ in areas in which ignitible concentrations of
flammable gases or vapors will be present
only due to abnormal, unusual, or accidental
conditions
ɀ in marine applications where water spray
and corrosive atmospheres are
considerations
ɀ in elevated ambient temperatures often
found in industrial applications
ɀ in installations where moisture, dirt, dust,
vibration, corrosion and rough usage are
problems
ɀ wherever the damaging effects of water,
wind, snow, sleet, hot sun, or any
combination of these elements, are problems
754
COLOR: CMYK
ɀ Ballast housings and mountings – copperfree aluminum (less than 0.4 of 1%)
ɀ Exterior hardware and guards – stainless
steel
ɀ Reflectors (dome and angle) – Krydon
fiberglass-reinforced polyester material
ɀ Globes – heat and impact resistant
internally fluted glass
ɀ Refractors – glass
ɀ Reflector lens – spun Alzak aluminum,
tempered glass, stainless steel door frame
Standard Finishes:
ɀ Copper-free aluminum – epoxy powder
coat
ɀ Alzak aluminum – natural
ɀ Stainless steel – natural
ɀ Krydon material – high reflectance white
Pendant mount with globe and guard
Certifications and
Compliances:
ɀ NEC and CEC:
- Class I, Division 2, Groups A, B, C, D
- with Glass Refractor - Class II, Class III &
Simultaneous Presence (Class I,
Division 2 and Class II)
- Class 1 Zone 2
ɀ IEC:
- Zone 2 Ex nR IIC
ɀ UL Standards:
- 844, 2279 Hazardous (Classified)
Locations
- 1598 Luminaires
- 1598A Marine Locations
ɀ CSA Standards
- C22.2 No. 137
ɀ IEC Standards
- 60079-15
Ceiling mount with etched Alzak reflector
and tempered glass lens
Options:
The following special options are available
from the factory by adding suffix to luminaire
Cat. No.
Suffix to be
Description
Added to Cat. No.
ɀ Restricted Breathting Construction . . S826‡
- Class I Division 2 & Zone 2
Suitability
Cooler Operating Temperatures
(T-Numbers)
ɀ Certified for IEC Zone 2 . . . . . . . . . S826TB‡
- Furnished with terminal block
crimp terminals and dedicated
voltage ballasts (no MT, DT, or TT)
ɀ Fused – to protect ballast and capacitors
against abnormal line conditions . . . . S658†*
ɀ Quartz auxilliary lighting – comes to full
brightness immediately and remains lit until
the HID lamp attains 60-70% of full
illumination. For non-hazardous locations
only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QTZ
(NOTE: Quartz lamp not included use 100W
single ended lamp – Q100DC, Q100CL/DC, or
100Q/CL/DC). Consult factory for top-hat
limitations.
ɀ Ballast-gard TM starter cutout switch –
prevents starter pulsing when lamp is cycling
or inoperative; prolongs ballast and ignitor
life. Available for use with 200-400W HPS
only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BG
ɀ Factory assembled with H.I.D. lamps
installed for additional labor savings. . . . . . FA
ɀ Top hat with stainless steel threaded insert
to attach ballast housing. . . . . . . . . . . . . . S806
US: 1-866-764-5454
CAN: 1-800-265-0502
Ceiling mount with glass refractor
Electrical Ratings:
ɀ 120 to 600 volts and multi-tap刁
ɀ 200, 250, 400W HPS; 250, 400W MV and
MH
Accessories:
ɀ See pages 775 to 776 for complete listing.
刁Alzak is a registered trademark of ALCOA.
† Not for use in Canada.
‡Suffix S826 and S826TB cannot be used with GRD4
Reflector/Lens
* When ordering fuses for luminaires, option S658, you must
specify the operating voltage. S658 cannot be ordered with
/MT in the catalog number.
Copyright© 2006 Cooper Crouse-Hinds
Zoom: 100