TAYLOR
Liquid Level Float
Gauges
TAYLOR
Junior and Senior Domestic Tank Gauges
Float gauges are designed to indicate the liquid level contents of
LP-Gas containers. These gauges mount in a junior or a senior
flanged coupling. Gauges can be top, side or angle mounted for
above ground or below ground containers.
Standard Stock Sizes
Junior Gauges (H=1/2")
Item Number
Part Number
Tank Diameter
Mounting
130299
JA124I
24"
Top
130305
JA154I
30"
Top
130310
JA192J
37"
Top
130315
JA206I
41"
Top
130301
JC124B
24"
45° Angle
130303
JC154B
30"
45° Angle
130307
JC190B
37"
45° Angle
130312
JC210B
41"
45° Angle
130316
JD080A
24"
Side, End
130318
JD100F
30"
Side, End
130320
JD120D
37"
Side, End
130322
JD140C
41"
Side, End
Junior Gauge
Senior Gauges (H=1")
Item Number
Part Number
Tank Diameter
Mounting
130324
SA130A
24"
Top
130326
SA160A
30"
Top
130328
SA194A
37"
Top
130330
SA214A
41"
Top
130332
SC130B
24"
45° Angle
130334
SC160A
30"
45° Angle
130336
SC194D
37"
45° Angle
130338
SC214C
41"
45° Angle
130340
SD080D
24"
Side, End
130342
SD100C
30"
Side, End
130344
SD120G
37"
Side, End
130346
SD140A
41"
Side, End
Senior Gauge
1
Liquid Level Gauges
Threaded Brass Domestic Tank Gauges
Float gauges are designed to indicate the liquid level contents of
LP-Gas containers. These gauges mount in a 3/4", 1" or 1 1/4" tank
coupling. The 3/4" and 1" gauges are for only top mount
applications. The 1 1/4" gauges are for top, side or angle mount
applications. These threaded Brass
gauges are only for
aboveground tanks.
Standard Stock Sizes
3/4" Threaded Brass Gauges (H=1")
Item Number
Part Number
Tank Diameter
Mounting
131640
UA130A
24"
Top
131645
UA160A
30"
Top
131650
UA194A
37"
Top
131655
UA210A
41"
Top
3/4" Threaded Brass Gauge
1" Threaded Brass Gauge (H=1")
Item Number
Part Number
Tank Diameter
Mounting
131589
HA130ARN
24"
Top
131590
HA156ARN
30"
Top
131592
HA160ARN
30"
Top
131594
HA162ARN
31.5"
Top
131595
HA194ARN
37"
Top
131661
HA210ARN
41"
Top
1" Threaded Brass Gauge
1 1/4" Threaded Brass Gauge (H=1")
Item Number
Part Number
Tank Diameter
Mounting
131600
TA130A
24"
Top
131604
TA156A
30"
Top
131605
TA160A
30"
Top
131609
TA164A
32"
Top
131610
TA194A
37"
Top
131615
TA210A
41"
Top
2
1 1/4" Threaded Brass gauge
TAYLOR
Junior and Threaded Vertical Cylinder Gauges
Float gauges are designed to indicate the liquid level contents of
LP-Gas containers. These gauges mount in a junior adaptor or a
1" or 1 1/4" tank coupling.
Standard Stock Sizes
Item Number
Part Number
Cylinder Size
131545
JA176B
200 LB
131540
JA250J
420 LB
131608
HA180A
200 LB
131619
HA254J
420 LB
131611
TA180A
200 LB
131616
TA254S
420 LB
Head
Junior
1" MNPT
1 1/4" MNPT
Junior and Senior Motor Fuel Tank Gauges
Junior Gauge
Float gauges are designed to indicate the liquid level contents of
LP-Gas containers. These gauges mount in a Junior or Senior
adapters. Gauges can be top, side or angle mounted. Standard direct
read dials are installed, with remote sending units available.
Standard Stock Sizes
Junior Gauges (H= -1/2)
Item Number
Part Number
Tank Diameter
Mounting
130247
10CC
10"
Side, End
130248
12CC
12"
Side, End
130250
14CC
14"
Side, End
130251
16CC
16"
Side, End
130252
18CC
18"
Side, End
130253
20CC
20"
Side, End
130254
22CC
22"
Side, End
130255
24CC
24"
Side, End
130249
12AC
12"
45° Angle
130256
14AC
14"
45° Angle
130257
16AC
16"
45° Angle
130258
18AC
18"
45° Angle
130259
20AC
20"
45° Angle
130260
22AC
22"
45° Angle
130261
24AC
24"
45° Angle
Junior Side or End Mount
Junior 45° Angle Mount
3
Liquid Level Gauges
Junior and Threaded Lift Truck Gauges
Float gauges are designed to indicate the liquid level contents of LPGas containers. Choose a gauge to measure your lift truck cylinder in
a vertical, horizontal or both positions. These gauges are available
with Junior, 3/4" or 11/4" brass threaded heads.
Standard Stock Sizes
Universal Mount
TU160B
Item Number
Part Number
Cylinder Size
Head
131506
JU086B
131507
UU086B
131520
TU086B
1 1/4" MNPT
131512
JU160B
Junior
131513
UU160B
131530
TU160B
1 1/4" MNPT
131516
JU212A
Junior
131517
UU212A
131535
TU212A
Junior
20 LB
33 LB
43 LB
3/4" MNPT
Universal Gauge
3/4" MNPT
3/4" MNPT
1 1/4" MNPT
Horizontal Position
Measures 0 - 40 % Full *
Vertical Mount
Item Number
Part Number
Cylinder Size
131510
JA086A
20 LB
131514
JA166A
33 LB
131518
JA216A
43 LB
Head
Junior
Horizontal Mount
Item Number
Part Number
131508
JD060A
Cylinder Size
Head
Junior
20,33,43 LB
131525
TD060A
1 1/4" MNPT
Vertical Position
Measures 0 - 20 % Full *
* Example is for 33 LB cylinder
4
TAYLOR
Junior and Senior Anhydrous Ammonia Gauges
Float gauges are designed to indicate the liquid level contents of
anhydrous ammonia containers. These gauges mount in a Junior or
Senior adapters. Gauges can be top, side or angle mounted.
Standard Stock Sizes
Junior Gauges (H= 1/2")
Item Number
Part Number
Tank Diameter
Mounting
130400
BA124A
24"
Top
130402
BA154A
30"
Top
130403
BA214B
41"
Top
130410
BC124A
24"
45°Angle
130420
BD080A
24"
Side, End
Senior Gauges (H=1")
Junior Gauge
Item Number
Part Number
Tank Diameter
Mounting
130430
AA130A
24"
Top
130432
AA160A
30"
Top
130434
AA194A
37"
Top
130436
AA214E
41"
Top
290000
A6480-13 *
41"
Top
130438
AA240A
46"
Top
290001
A6480-12 *
46"
Top
130439
AA250A
48"
Top
130440
AC130A
24"
45°Angle
130442
AC160A
30"
45°Angle
130444
AC194A
37"
45°Angle
130446
AC214B
41"
45°Angle
130448
AC240A
46"
45°Angle
130450
AD080B
24"
Side, End
130452
AD100D
30"
Side, End
130454
AD120E
37"
Side, End
130456
AD140A
41"
Side, End
130458
AD150A
46"
Side, End
130459
AD160J
48"
Side, End
Senior Gauge
* All stainless steel construction
5
Liquid Level Gauges
Visible “4" Float Gauges
Visible “4" float gauges are designed to indicate the liquid level
contents of LP-Gas and Anhydrous Ammonia containers. These
gauges mount in a senior gauge adaptor. Gauges can be top, side
or angle mount for above ground containers up through 96" tank
diameter.
Master Model A and B Gauges
Visible “4" float gauges are designed to indicate the liquid level
contents of LP-Gas and Anhydrous Ammonia storage containers.
Both the model A and model B master gauges feature a large 10"
dual service dial face with a chrome retainer.
Model A - Standard construction gauge which mounts directly to
a 2" MNPT x Senior adaptor with a teflon gasket. Gauges can be
top or end mounted.
Model B - Heavy duty construction gauge which mounts directly
to a 2 ½" MNPT x 8-Bolt flange adaptor with a stainless steel
spiral wound gasket. Gauges can be top or end mounted.
Standard Stock Sizes
Tank
Diameter
Tank
Opening
Model
Type
Item
Number
Part
Number
2"
A
138000
ME2434A
2 1/2"
B
138005
ME2434B
2"
A
138010
ME2738A
2 1/2"
B
138015
ME2738B
2"
A
138020
ME2839A
2 1/2"
B
138025
ME2839B
2"
A
138030
ME3245A
2 1/2"
B
138035
ME3245B
2"
A
138040
ME3650A
2 1/2"
B
138045
ME3650B
2"
A
138050
ME3862A
2 1/2"
B
138055
ME3862B
72"
82"
84"
96"
104" to 108"
130"
6
TAYLOR
“Roadmaster” Gauges for Mobile Applications
Uniquely designed to withstand the tough-shock and vibration
associated with mobile service of LP-Gas and Anhydrous
Ammonia. These gauge mount in a standard 8-bolt flange.
Applicable to end or side mounting. Standard and easily replaceable
“4" easy viewing dial.
Standard Stock Sizes
Tank Diameter
Item Number
Part Number
72"
131833
RM1833
74"
131834
RM1834
79"
131836
RM1836
84"
131838
RM2438
7
Liquid Level Gauges
Senders and Receivers for Motor fuel Service
Squibb-Taylor’s sender gives both direct and remote indication of LP-gas
liquid level on all makes of cars and trucks when used with either a receiver,
furnished by Squibb-Taylor, or the original equipment fuel gauge on the
vehicle. The sender also works on all recreational vehicles .
Squibb-Taylor’s 0-90 ohm receivers are available with either an analog or
digital display. Receivers can be mounted at the dash or other remote
locations.
Part
Number
Ohms
Application
Description
136600
0 - 90
GM & RV’s
Sender
136601
70 - 10
Old Ford & Chrysler
Sender
136602
15 - 160
New Ford
Sender
136607
110 - 10
New Chrysler
Sender
136609
95 - 5
New Dodge
Sender
136536
40 - 250
New GM
Sender
136613
220 - 20
Dodge 2000
Sender
136650
0 - 90
GM & RV’s
Sender & 18' Cable
136651
70 - 10
Old Ford & Chrysler
Sender & 18' Cable
136652
15 - 160
New Ford
Sender & 18' Cable
136657
110 - 10
New Chrysler
Sender & 18' Cable
136659
95 - 5
New Dodge
Sender & 18' Cable
136520
0 - 90
Receiver
Analog Display
136521
0 - 90
Receiver
Digital Display
136605
0 - 90
Sender, Analog Receiver & 20' Cable
136606
0 - 90
Sender, Digital Receiver & 20' Cable
136521 Digital Receiver
Sensor
Stationary Tank Monitor
The Monitor remotely indicates the liquid level of LP-gas in a stationary
storage tank. It consists of two parts - a sensor installed at the tank and a
monitor placed at a remote location. Liquid level indication on the monitor
is given by a multicolor bar graph. The sensor fits directly on Taylor or
Rochester Jr. float gauges and connects to the monitor with outside grade
two conductor 22/24 gauge cable.
136619 Monitor
Low/normal level alarm indication is given by red and green LEDs.
Resettable alarm buzzer triggers when low level is sensed.
Description
Adjustable alarm level can be preset anywhere between 0% and 99%.
Monitor & Sensor for
remote readout at one
stationary tank.
Two DPDT dry alarm contacts available for other uses.
AC/DC operation with a 120 VAC wall plug-in adaptor included.
Part
Number
136619
Includes*
Digital bar graph, low level
indicator light, pre-settable
alarm level, low level audio
buzzer with reset button
* Optional: Relay dry contact output. NO/NC, 1 amp.
Interfaces with RTUs or programmable controllers.
8
TAYLOR
Tank Monitors for Residential and Small Commercial Applications
The system consists of two components - a sensor installed at the propane
tank and a monitor placed at a remote location. Propane level in the tank is
displayed by the monitor on the bar graph.
Intended for residences using either aboveground or underground storage
tanks. Also can be installed at restaurants, Laundromats, car washes, and
other small commercial/industrial applications.
Gives visual indication (multi-colored bar graph) of propane level in the
tank.
Two versions available - 120VAC operation (transformer included) for
continuous liquid level indication or 9 VDC battery operation with "on
demand" (push-button) liquid level indication.
Extremely compact, easy to install.
Sensor fits all Taylor and other competitive float gauges, tank modifications
are unnecessary to make installation.
Part Number
Description
136617
Sensor and 9 Volt Battery Monitor
136618
Sensor and 120 VAC Monitor
Taylor Gauge Screws, Gaskets and Dials
Part Number
Description
130118
Junior Gauge Screw
130119
Senior Gauge Screw
130219
Master Gauge Bolt
130121
Junior Gauge Gasket - Buna-N
130122
Senior Gauge Gasket - Buna-N
130130
Senior Gauge Gasket - Teflon
130040
Master & Roadmaster Spirotallic Gasket
130020
Visible “4" LP-Gas Dial
130025
Visible “4" NH3 Dial
130035
Master Gauge Dial
131839
Roadmaster Dial
9
136618 Monitor
Liquid Level Gauges
Taylor Gauge Replacement Dials
2701 5TR Style - R indicates partially red face
dial. Red area indicates low fuel.
130012, 130009, 130011 & 130026
Style A
Large dia. Locator
pin hole on back of
dial in this location
R3D- Jr Hall Compatible
Jr- 1 1/4" Brass
130022, 130023,
130024 & 130028
130021
Part Number
Used On
Style B
Large dia. Locator
pin hole on back of
dial in this location
Notes
130005 (2201)
Glue-on replacement for any Taylor Jr crimped-in dial.
Will work on any Jr gauge
130010 (2201)
Glue-on replacement for any Taylor Sr crimped-in dial.
Will work on any Sr gauge
130012 (2701)
Used in all standard above ground system tank gauges: Jr, 1" or 1 1/4" (pre-2002)
Used in any Jr or Sr end, side or angle gauges which are not crimped-in type.
Guide hole in back of dial at 95% - Style A
130009 (2701)
Used in any Jr or Sr top mount gauges which are not the crimped-in type or standard
above ground system tanks.
Guide hole in back of dial at 5% - Style B
130011 (2700)
Used in underground tanks: Trinity , American Welding & Thompson
Guide hole in back of dial at 95% - Style A
130026 (2700)
Used on underground tanks: Quality & Chemi-Trol
Guide hole in back of dial at 5% - Style B
130022 (5-2767)
Remote ready dial used in all standard above ground system tank gauges: Jr, 1" or 1 1/4"
(pre-2002). Used in any Jr or Sr end, side or angle gauges which are not crimped-in type.
Guide hole in back of dial at E - Style A
130023 (5-2768)
Remote ready dial used on any Jr or Sr top mount gauge which is not the crimped-in type
or standard above ground system tanks.
Guide hole in back of dial at 30% - Style B
130024 (5-2876)
Remote ready dial used in underground tanks: Trinity , American Welding & Thompson
Guide hole in back of dial at E - Style A
130028 (5-2824)
Remote ready dial used on underground tanks: Quality & Chemi-Trol
Guide hole in back of dial at 30% - Style B
130021 (2701)
Used on any 1 1/4" (post 2002) gauge.
Same as Rochester Jr dial
10
TAYLOR
Information Needed With Gauge Orders
Simply order Taylor Gauges by the gauge code and an exact duplicate
of the gauge from which the code was taken will be delivered. All
Taylor Gauges produced since 1964 have the gauge code stamped on
the head.
If gauge code is not available, specify the following information.
1. Type of Service: LP-Gas, Anhydrous Ammonia or other materials
2. Gauge Size (Head Size): Specify Junior, Senior, Brass Threaded (3/4", 1" or 1 1/4"), Master Model A or B or Roadmaster.
3. Type Mounting: Top, Side, End or Angle (if angle, specify angle above horizontal centerline)
4. Give Following Dimensions:
H - Distance from outside of container to base of gauge head
D - Inside diameter of container
For vertical cylinders:
X - Distance from center of gauge adaptor to nearest inside wall
O - Cylinder height
5. Dial Number of old gauge.
11