HD Supply Proprietary And Confidential
HD SUPPLY
42" Quick-install Ceiling Fan Requirements
PRODUCT DESCRIPTION
42" Quick-Install (B-542)
Effective Date: Sept. 20, 2007
42" Five-Blade Quick-Install Ceiling Fan - Ceiling Hugger Or 4" Down-Rod Mount - Three Speed - Reversible
Rotation - Reversible Blades - Light Kit With Glass - Three 40W Candelabra Base Bulbs Included - Limited
Lifetime Warranty
COUNTRY OF ORIGIN
Originated 062096
FINISH
WHITE
POLISHED BRASS
BRUSHED NICKEL
China
SKU
269146
269147
269148
White/Bleached Oak Reversible Blades - Light Kit With Alabaster-Style Glass
Oak/Rosewood Reversible Blades - Light Kit With Clear Hammered Glass
Maple/Black Reversible Blades - Light Kit With Clear Hammered Glass
Note: All dimensions are MINIMUMS unless otherwise specified
CHARACTERISTICS
MOTOR
HD SUPPLY REQUIREMENT
Induction; 14
172 or equivalent
145.75
Aluminum, electrical grade
146
12 - 15
Silicon steel
Double seal; 6203ZZ
Double seal; 6202ZZ
19
Steel or aluminum die cast
1.4T
Multi-capacitor
OPERATIONAL PARAMETERS
Type; Poles
Rotor O.D. (mm), Minimum
Rotor I.D. (mm), Minimum
Material
Stator O.D. (mm)
Stator Thickness (mm)
Material
Motor Bearing, Top
Motor Bearing, Bottom
Shaft Diameter (mm)
Motor Housing , Material
Thickness (mm)
Speed Control Method
COMMENTS
Induction; 16
153
130.8 (+/- 0.1)
Aluminum, electrical grade
130.3 (+/- 0.1)
12 (+/- 0.5)
Silicon steel
Double seal; 6202Z
Double seal; 6202Z
18 (+/- 1.0)
Steel
1.4 (+/- 0.1)
Dual capacitor
Current (Amps) +/- 10%
Low:
Medium:
High:
Power Consumption (Watts)
Low:
Medium:
High:
Speed (RPM) +/-10
Low:
Medium:
High:
Temperature Rise (degrees C.)
5/4 Blade Mounting Option
Pre-glued Pads For Blade Holders
0.28
0.43
0.63
0.20
0.33
0.44
13
31
73
10
27
51
65
120
175
66 C.
Yes
Yes
108 (+/- 5%)
183 (+/- 5%)
236 (+/- 5%)
Per UL 507
Yes
Yes, on motor
WIRING CONTROLS
Connections, Internal
Switch, Reverse: UL listed;
Switch vertically positioned;
Switch Down = Air Down
Switch, 3-Speed: UL Listed
Capacitor, Start: 5 uf
Capacitor, Speed Control: 5uf + 5uf
Lead Wire, Length (Minimum)
54" (137.2cm)
FINISH
Paint Thickness
Plating Thickness
Coating on Plating
Salt-Spray Test (Paint/Plating)
Hardness (Paint/Plating Lacquer)
UL listed; Switch vertically positioned;
Switch Down = Air Down
UL Listed
4.5 uf
6uf + 5uf
54" (137.2)
Note: Color standards will be provided for each model.
Note: Color standards will be provided for each model.
1.5 mil.
0.1 mil.
Acrylic/Epoxy lacquer
72 hrs., Minimum
3H, Minimum
1.5 mil.
0.06 mil.
Epoxy lacquer
72 hrs., Minimum
3H, Minimum
240
Steel; 0.8
See artwork
256 +/- 2
Steel; 0.7 (0.6 minimum)
Yes
DECORATIVE HOUSING
Size (mm), Max. Diameter
Material; Thickness (mm)
Assembly Note
U:\Vendors\Air Cool\Spec Sheets\SpecSheet_269146.xls
HD Supply Proprietary And Confidential
SWITCHCUP
Size (mm)
Material; Thickness (mm)
Detachable
HD SUPPLY REQUIREMENT
90 (W) x 65 (H)
Steel; 1.0
No
COMMENTS
90 (W) x 53 (H) (+/- 1.0)
Steel; 0.7
No
MOUNTING SYSTEM
Yes
158
Steel; 0.8
Tri-mount
30, Minimum
50
Material
Nylon or Die Cast (No Recomposition)
Color (Based on Canopy FinisWhite (white); Black (PB, BN)
Mounting Plate, Dim (mm) or Bkt
150
Material
Steel
Rubber Pad for Ball Hanger
Required
Downrod Material; Quantity
Steel; 2
Dimensions
3/4" I.D.; 3" & 6" L
BLADE BRACKET
Style
Per bracket/medallion design (see photos)
5
Quantity
Material
Zinc die cast (No Recomposition)
Size (mm)
90 x 45
Pitch Angle (degrees)
18
5/4 Blade Mounting Option
Required
Weight Tolerance (within set)
+/-0.5 grams
BLADES
Style (see photo)
New Tip end
Material
Plywood
Quantity
5
Mounting System Meets UL507
Canopy, Size (mm)
Material; Thickness (mm)
Hanging Method
Slope Ceiling Angle (degrees)
Hanger Ball Diameter (mm)
Reversible, Finish: Side 1/Side 2
White:
PB:
BN:
Size (+/- 0.5mm)
(Front Width X Back Width)
Thickness (mm), Minimum
Finish
Weight Tolerance (within set)
Assembled Diameter (tip-to-tip)
Yes
130 +/- 2
Steel; 0.8
Tri-mount
30
52
Nylon
White (white); Black (PB, BN)
128 +/- 2mm
Steel, Quick Install
Yes
Steel; 2
1-1/16"(+/-1/16) OD:3"&6"L
Per bracket/medallion design/HUT Bracket
5
Zinc die cast (No Recomposition)
80x65
12 +/- 0.5
N/A
+/-0.5 grams
New Tip end
MDF
5
6
High gloss
+/-1.0 grams
32", Minimum
WHITE / MS3074
MS5043 / MS3071
BLACK/ MS3700
125 (W) x 102 (W) x 425 (L) (+/-0.5)
136 x 105 (+/-1.0)
5 +/- 0.30
Matte finish
+/-1.0 grams
42" (+/- 0.5)
None
None
150 x 130 ????
125*102
PERFORMANCE
Vibration / Wobble
HARDWARE
Blade Bracket Screws & Washers M6 x 13mm; Phillips head; lock washers
Blade Mounting Screws & Washers M5 x 13mm; Phillips head; lock washers
Wire Nuts
3 each
Screws for Canopy or Housing
Philips head
Finish (Based on canopy/housin PB = PB
White = PB
Balancing Kit
Fob
1/4"*13.5mm; Cross or Philips head; Spring washers
3/16"*7.5mm; Cross or Philips head; fiber washers
Knurled, Cross or Philips head
Philips head
PB = PB
White = PB
Required
standard wood fob
Required
standard wood fob
N/A
N/A
UNIVERSAL LIGHT KIT
Glass Style/Quantity (see photo)
Fan w/ light kit must include extra
Yes
cap in case light kit not used.
Plug for Light Fitter Opening/Finish Yes / matches cover
Connector Plug Required
Yes
N/A
Yes / matches cover
NA
OTHER
UL507 Compliance
Pre-Purchase Testing
Workmanship
Provide UL #
This product must achieve a rating of "Good"
on HD SUPPLY's Pre-Purchase testing.
All components must be smoothly finished with
no burrs, external rough edges, cracks, voids,
corrosion or other imperfections that could injure
the user or affect serviceability, durability or
apperance.
U:\Vendors\Air Cool\Spec Sheets\SpecSheet_269146.xls
E75795
N/A
All components must be smoothly finished with
no burrs, external rough edges, cracks, voids,
corrosion or other imperfections that could injure
the user or affect serviceability, durability or
appearance.
HD Supply Proprietary And Confidential
LABELING
UL507 Compliance
HD SUPPLY Logo(Decal)
UPC #, Date Code, Serial #
Format
Location
HD SUPPLY REQUIREMENT
Provide UL #
Located on switchcup; see artwork
Include on UL label or on separate label near
UL label the following information:
UPC #:
xxxxxxxxx
Vendor#
xxxxx
Date:
MMYY
SN:
xxxxxxxxx
Permanently attached to top of housing
(downrod mount) or motor (flush mount)
COMMENTS
E75795
N/A
Include on UL label or on separate label near
UL label the following information:
UPC #: xxxxxxxxx
Vendor #: xxxxx
Date: MMYY
SN: xxxxxxxxx
Permanently attached to top of housing
(downrod mount) or motor (flush mount)
PACKAGING
Note: Box dimensions are set by HD SUPPLY
Instructions: Clear assembly/operating instructions must
be provided with each unit.
UPC Label: Each unit carton must have a clearly legible
UPC (bar code).
SKU #: Each unit (inner) carton must have the SKU #
listed near the UPC (bar code).
Bilingual Wording: All caution/warning statements & instructions
must be printed in English & Spanish
Grapices: Must use HD SUPPLY approved electronic
graphics file provided on disk or approved film
work
Sensormatic Tags: Not required
Protection: Must meet N/ISTA (National/International Safe
Transit Association) Pre-Shipment Test
Procedures.
Shipping Marks: Per HD SUPPLY VBA
U:\Vendors\Air Cool\Spec Sheets\SpecSheet_269146.xls
Box dimensions are set by factory
Clear assembly/operating instructions must
be provided with each unit.
Each unit carton must have a clearly legible
UPC (bar code).
Each unit (inner) carton must have the SKU #
listed near the UPC (bar code).
All caution/warning statements & instructions
printed in English & Spanish
Yellow boxes with shipping mark and HD SUPPLY
logo printed on boxes
Not required
Must meet N/ISTA (National/International Safe
Transit Association) Pre-Shipment Test
Procedures.
Per HD SUPPLY