LBM600
1
Summary
Main features summary
2
Optical specifications
3
Color Rendering Index
4
Angular distribution
5
Mechanical dimensions
6
Cooling System
7
Electrical Data
7
About us
8
2
Main features summary
The LBM600 is a LED's optical engine, result of a cooperation between ODL, leader in coating manufacturing
and the Optical Design Center having 20 years of experience in design and manufacturing of optical engine
for videoprojection , whose main feauture is an output of more than 20.000 lumen full color brightness. For
the high brightness, wide color gamut possibility to obtain continuous white light from 3200K to 8000K and
low final etendue this product is the new reference in the LED's projector market. A patented optical engine
and a new hybrid cooling system guarantee the maximum available brightness while maintaining superior
color quality, high CRI and over 20000h lifetime. No flicker because of the CW mode driving and superior
uniformity for the optimized integration system.
New optical architecture
“Perfect mix of high quality coatings, materials and technical solutions.”
The new patented optical architecture is the result of over two years of research and optimization; adding the
perfectly customized coatings by ODL and the high quality of the innovative optical materials applied, place
LBM600 far ahead from competitors.
A future-proof solution
We designed the mechanics of the engine to make the assembly and substitute of any component very easy.
The maintenance and part substitution is extremely easy and can be done without any particular skill. The
system is ready for up-scaling and for new sources that will be available in the medium-long term. This
makes this product future-proof.
Customization
We are know that our customers need to customized their product and, at the same time, they need to limit as
much as possible the cost and efforts to do that. For this reason we design our system taking into
consideration the possibility of easy customization: it regards the projection part (light shape, angle etc.) and
color quality where ODL can offer a wide range of solutions.
3
Total flexibility
We designed and developed any part of this engine with max attention and care and for this reason we
suggest to use the available solutions for cooling, optics and mechanics but we are open to different
solutions in case our customer prefer to use or develop different modules. In this case we indicate the
parameters to maintain to guarantee for correct working. The possibilities of flexibility regards the driving (we
provide just a module for the direct control of the LED's) the cooling system, the projection part after the
condenser, the dichroic filters for different color rendition.
Optical specifications
The LBM600 provide a full RGB color. The primary color spectra are:
Green:
Blue:
Red:
Red:
The max flux that can be obtained for each channel is:
RED (14.0A)
4000lm (minimum)
Green (20.0A)
14500lm (minimum)
Blue (20.0A)
1800lm (minimum)
A specific filter can move the green towards a more saturated region.
4
Color Rendering Index (CRI)
The figure shows the CRI of LBM600 vs. a 1000W discharge lamp
LBM600
Osram 1000W
(R13.8A+B 5.0A G14.0A)
x
y
Tc
0,3253
0,3114
5865K
0,3253
0,3622
5807K
5
Angular distribution:
f# ~1.2 but can be customized according to the speed of the imaging system.
Of course increasing the f# the image size increases as well.
In case of f#=1.2 the image size is:
6
Mechanical dimensions
As previously said we dedicate particular attention to have an easy assembly and maintenance of the system.
At the same time we design the assembly to have a high precision positioning to guarantee a perfect
alignment of the optical system.
The final dimensions, including the cooling system, are:
LxHxP
250 x 250 x 110 mm
TOP VIEW
SIDE VIEW
DOWN VIEW
The optical parts are sealed to avoid any dust contamination.
7
Cooling System
Reliability and efficiency of the LED's are strictly related to the quality of the cooling system. We developed
both a liquid and a hybrid cooling systems. For the hybrid system we designed a cooling using phase
changing components and dissipators. This offer to the customer the possibility to select the best cooling
system according to the specific environment.
The final result is a compact low noise assembly with superior thermal stability in case of hybrid solution
and a completely silent product in case of liquid cooling. This can be very helpful in application where
reduced noise is a requested issue (i.e theatre)
Electrical Data
RED
GREEN
BLUE
Current :
Voltage:
Imax: 14A
Imax: 20A
Imax: 20A
Vmax=17V
Vmax=17V
Vmax=17V
8
About us
ODL Srl, founded in 2009, replaced the activity of ODL SpA that has worked in the field of optical coatings since
1987. The Company has as a scope to develop processes and manufacture filters and optical coatings in the
ultraviolet (UV), near infrared (NIR) and visible (VIS) ranges.
The application fields are stage lighting and entertainment, architectural lighting, fiber optics systems, railway
and airfield signaling, corrective filters for LED's, UV curing, alternative energy.
Established in the 2010 as a spin-off of SIM2 Multimedia, the Optical Design Center is a company offering
integrated solution in:
Optical Design/Engineering.
Mechanical Design
Thermal management
Electrical Engineering
Currently ODC is active in the design and industrialization of component and system for medical
imaging/illumination, industrial automation, energy production, in-door/outdoor lighting and projection systems.
ODL srl www.odlcoating.com