to View Specification Sheet

advertisement
B6PLIC-32
6” 26W/32W COMPACT FLUORESCENT IC HOUSING
DESCRIPTION
B A F F L E
Thermally protected, specification grade compact fluorescent IC
housing. For new construction where housing will be in direct contact
with insulation. Accommodates (1) 26/32 4-pin Compact fluorescent
lamp. Furnished with preinstalled adjustable bar hangers. Junction
box is provided with four 1/2" KOs, one 3/4" KO and four Romex
knockouts with strain relief.
SPECIFICATION
T R I M
A. OUTER HOUSING - Die formed
aluminum construction for maximum
heat dissipating air chamber on top
of the housing. Junction box could
be accessed from inside and
outside housing.
B. INNER HOUSING - Die-formed, all
aluminum construction for maximum
heat dissipation and rust protection.
Adjusts vertically in plaster frame to
accommodate 1/2" to 1-3/8" ceiling.
C. SOCKET - One vertically mounted
plug-in socket. Unitized optics
guarantees proper trim to housing
installation. Tool-less installation
adjustability from inside the housing.
D. BALLAST - Thermally protected,
current controlled ballast, will
produce full light output, increase
lamp life with no noise and flicker.
Ballast supplied is manufactured by
Advance.
6”
F L U O R E S C E N T
WATTAGE
F. JUNCTION BOX - is ETL listed for
through-branch circuit wiring and
has four 1/2" KOs, one 3/4" KO and
four Romex knockouts with true pryout slots and strain clamps.
ETL and C-ETL listed
for Damp location.
for Feed Through wiring.
for direct contact with insulation.
Gasket to prevent air
flow from heated or air
conditioned spaces.
Note: Title 24 Approved only if ordered with electronic ballast and Air-Shut.
B6PLIC-32 -
E. BAR HANGERS - Preinstalled bar
hangers allow housing to be
positioned and locked at any point
within a 24" joist span. They can be
used on either long or short axis of
housing and can be shortened for
12" joists. They are designed to be
hammered directly without using
nails or screws and could be fit onto
T-Bar spline for easy installation and
quick alignment.
Energy Star Compliant fixtures
ship w/ electronic Energy Star
compliant ballasts.
ORDERING INFORMATION, PLEASE SPECIFY:
BALLAST
J 32W
J E-AD
J 26W/32W J E- Electronic
1
-Advance
Elec. Ballast
VOLTAGE
EMERGENCY OPTIONS
J 120
J 277
J EMG 750 (750 lumnes)
J EMG 1300 (1300 lumnes)
J EMG-D-750 (750 lumnes)
J ICE-1300 (1300 lumnes)
2
Energy
Star
3
3
4
5
DIMMING
J Adv-7
J Adv-10
J Lut-H(FDB)
AIR-SHUT
AT-Standard
OTHER OPTIONS
J FUSE
J RIP
6
7
TRIM TYPE
J B725
J B731
J B722
J AF640
J B702
J B729
J B724
J B704
COLOR
J B755
J B737
J B735
J B736
J B757
J B760
BAFF.
JW
REFLEC.
J MB
J P J CL
J SN J RG
J CP J W
J CP
TRIM RING
J WH
J BK
J SN
J CP
J CH
J PB
(1=E-AD=Advance Electronic Ballast) (2=Energy Star Ballast=Available in 120V only )(3-EMG=Emergency battery pack w/ remote test switch)
(4-EMG-D=Emergency battery pack w/ remote test switch for damp location)(5-ICE=Emergency battery pack w/ remote test switch operating between -18ºC and 55ºC) (6-FUSE=Single slow-blow fuse) (7-RIF=Radio interference filter)
SPECIFIED BY:
Specified:
B6PLIC -____-___-_____-____-_______-_____-_____-_____
TYPE
WATTAGE
BALLAST
DIMMING
VOLTAGE
EMG
TRIM TYPE
COLOR
RING
TYPE:
JOB NAME:
(Sample of Catalog Number: B6PLIC-32W-E-120-AT-EMG 750 -B701-W-WH)
Tel: 323-888-1973 • 877-375-5555 / Fax: 323-888-1977 • 877-375-3333
www.iuseelite.com • E-mail: sales@iuseelite.com
6” FLUORESCENT BAFFLE TRIMS
B731
BAFFLE W/
FROSTED DOME
FULL CONE
BAFFLE
MAX. LAMP WATT.:
MAX. LAMP WATT.:
32W TTT
32W TTT
BAFFLE:
COLOR
COMBINATIONS:
W, P, SN, CP
W-WH, P-WH,
SN-SN, CP-CP
RING:
WH, BK, SN, CP, CH, PB
B A F F L E
B725
B6PLIC-32
7-1/4”
7-1/4”
AF640
CONE REFLECTOR
W/ BAFFLE
DEEP SELF-FLANGE
AIR-SHUT BAFFLE
T R I M
B722
MAX. LAMP WATT.:
32W TTT
MAX. LAMP WATT.:
BAFFLE:
32W TTT
W, P
COLOR
COMBINATIONS:
REFLECTOR:
CL
W-WH, P-WH
RING:
7-1/4”
WH
7-1/4”
B702
B729
CONE REFLECTOR
W/ BAFFLE
BAFFLE WALL
WASH
MAX. LAMP WATT.:
32W TTT
32W TTT
BAFFLE:
COLOR
COMBINATIONS:
W, P
W-WH, P-WH,
SN-SN, CP-CP
REFLECTOR:
CL, RG
WALL WASH COVER:
RING:
WH, BK, SN, CP, CH, PB
7-1/4”
WH
B724
B704
REFLECTOR BAFFLE
WALL WASH
REFLECTOR BAFFLE
WALL WASH
MAX. LAMP WATT.:
MAX. LAMP WATT.:
32W TTT
32W TTT
BAFFLE:
BAFFLE:
W, P
W, P
REFLECTOR:
REFLECTOR:
CL
CL, RG
WALL WASH COVER:
WH
7-1/4”
RING:
7-1/4”
WH, BK, SN, CP, CH, PB
RING/TRIM FINISHES: WH=White BK=Black SN=Satin Nickel CP=Copper CH=Chrome PB=Polished Brass
BAFFLE FINISHES: W=White P=Black SN=Satin Nickel CP=Copper
REFLECTOR FINISHES: CL=Chrome RG=Gold W=White MB=Black CP=Copper SN=Satin Nickel
7-1/4”
F L U O R E S C E N T
MAX. LAMP WATT.:
6”
6” FLUORESCENT BAFFLE TRIMS
B737
BAFFLE W/
PRISMATIC LENS
BAFFLE W/
DROP OPAL LENS
MAX. LAMP WATT.:
MAX. LAMP WATT.:
32W TTT
32W TTT
BAFFLE:
BAFFLE:
W, P, SN, CP
W, P, SN, CP
RING:
RING:
WH, BK, SN, CP, CH, PB
7-1/4”
WH, BK, SN, CP, CH, PB
B736
BAFFLE W/
ALBALITE LENS
BAFFLE W/
FRESNEL LENS
MAX. LAMP WATT.:
MAX. LAMP WATT.:
32W TTT
32W TTT
BAFFLE:
BAFFLE:
W, P, SN, CP
W, P, SN, CP
RING:
RING:
WH, BK, SN, CP, CH, PB
7-1/4”
WH, BK, SN, CP, CH, PB
B757
B760
BAFFLE W/
FROSTED DOME
SHOWER LENS
BAFFLE W/
FROSTED LENS
MAX. LAMP WATT.:
32W TTT
32W TTT
BAFFLE:
BAFFLE:
W, P, SN, CP
W, P, SN, CP
RING:
WH, BK, SN, CP, CH, PB
7-1/4”
6”
RING:
7-1/4”
WH, BK, SN, CP, CH, PB
7-1/4”
DESCRIPTIONS:
• Built w/ deep baffle technology for glare free illumination.
• Unitized optics guarantee proper alignment of lamp.
• Both trim and trim ring are U.V. coated to prevent rust and discoloration caused by heat and sun light.
• Internal gasket prevents 100% of all light leakage.
REFLECTOR- Reflector assures optimum efficiency and glare control.
Lens/ Shower - Tempered Silicone lens cover prevents water or heat from damaging the housing.
RING/TRIM FINISHES: WH=White BK=Black SN=Satin Nickel CP=Copper CH=Chrome PB=Polished Brass
BAFFLE FINISHES: W=White P=Black SN=Satin Nickel CP=Copper
REFLECTOR FINISHES: CL=Chrome RG=Gold W=White MB=Black CP=Copper SN=Satin Nickel
F L U O R E S C E N T
MAX. LAMP WATT.:
7-1/4”
T R I M
B735
B A F F L E
B755
B6PLIC-32
Download