High Voltage Iso Divider
English
DC-High-Voltage-Divider up to 1 kV input range
 Electrically isolated high voltage divider with
safety current limiter (HV Current Limiter)
 Safely measure voltage on high voltage DC systems
of electric and hybrid vehicles
 Short-circuit current limit with the HV Current Limiter
 Connect directly to IPETRONIK SENS modules
Measuring range
(range defined by the module’s hardware)
±1000 V, ±100 V, ±10 V
(other ranges on request)
Accuracy at ambient temperature
+25 °C (+77 °F)
-20 °C ... +70 °C (-4 °F ... +158 °F)
±0.20 %
±0.50 %
Maximum allowable input voltage
Application according to CAT I
Application according to CAT II
1000 VDC
600 VAC @ 50 ... 60 Hz (sine wave)
Unallowable applications
CAT III and CAT IV
Input to output test voltage (2 s duration)
3536 VAC @ 50 Hz (sine wave )
Input impedance
21 MΩ // 100 pF (with Current Limiter and HV cable)
Cut-off frequency
2 kHz (max. input cable lenght of 1 m)
Voltage supply
15 VDC @ 35 mA typical (43 mA max.)
Power consumption, typical
0.5 W
Working temperature range
-20 °C ... +70 °C (-4 °F ... +158 °F) indefinitely
Storage temperature range
-30 °C ... +70 °C (-22 °F ... +158 °F)
IP-Code
IP 67 (ISO 20653 - 2013)
Dimensions
HV Divider
L100 mm (L125 mm with lugs) x W51 mm x H25 mm
L3.94 in (L4.92 in with lugs) x W2.01 in x H0.98 in
L55 mm x W26 mm x H12 mm
L2.17 in x W1.02 in x H0.47 in
HV Current Limiter
Weight
HV Divider
HV Current Limiter + 1.5 m HV cable
120 g (0.26 lb)
135 g (0.30 lb)
Safety instructions
Do not use High Voltage Iso Divider for applications on AC voltages of three-phase current drives in electric and
hybrid vehicles, due to the extremely high transient voltages and HF currents generated by the drive train systems!
An operation without the HV Current Limiter is strictly forbidden!
All users working on High Voltage applications must be trained and approved for this kind of work.
Subject to change
IPETRONIK GmbH & Co. KG
ipetronik.com
2015.02