ISO Update
Supplement to ISO Focus+
February 2011
People and places
ISO Members 2
International Standards in process
from 1 to 31 January 2011
Committee Drafts (CD) registered 3
Draft International Standards (DIS) circulated 5
Final draft International Standards (FDIS) circulated 9
Standards published 13
Standards confirmed 15
Standards withdrawn 16
Meeting calendar 17
People and places
ISO Members
Since the January 2010 issue of ISO Focus+, the
following changes affecting ISO members have
occurred:
New CEOs
Member bodies
KAZAKHSTAN (KAZMEMST)
Chairman: Mr. Satpayev Ryskeldi
KENYA (KEBS)
Managing Director: Mr. Joseph K. Koskey
Correspondent member
TAJIKISTAN (TJKSTN)
Director: Mr. Bakhtiyor Shukurov
2
ISO Update, Supplement to ISO Focus+– February 2011
International Standards in process
An International Standard is the result of an agreement between the
member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated
for study within an ISO technical committee. When consensus has
been reached within the technical committee, the document is sent to
the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member
bodies casting a vote. A confirmation vote is subsequently carried
out on a final draft International Standard (FDIS), the approval criteria
remaining the same.
CD registered
TC 45
Rubber and rubber products
ISO/CD 16301
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulicjack applications — Specification
ISO
4656:2007/CD
Amd 1
Rubber compounding ingredients — Carbon black — Determination of oil absorption
number (OAN) and oil absorption number of
compressed sample (COAN) — Amendment 1
TC 46
Information and documentation
ISO/CD TR
17068
Information and documentation — Records
Management — The Trusted Third Party Repository for Electronic Records
TC 58
Gas cylinders
ISO/CD 12209
Gas cylinders — Outlet connections for gas
cylinder valves for compressed breathable air
TC 61
Plastics
ISO/CD 16620
Plastics — Determination of the biomass
carbon ratio in plastic products and their
components
ISO/CD
16525-1
Adhesives — Test methods for isotropically
electrically conducting adhesives — Part 1:
General test methods
ISO/CD
16525-2
Adhesives — Test methods for isotropically
electrically conducting adhesives — Part 2:
Electrical characteristics
Period from 01 January to 31 January 2011
These documents are currently under consideration in the technical
committee.
They have been registred at the Central Secretariat.
TC 6
Paper, board and pulps
ISO/CD 8791-2
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2:
Bendtsen method
ISO/CD
16525-3
Adhesives — Test methods for isotropically
electrically conducting adhesives — Part 3:
Heat transfer properties
TC 17
Steel
TC 67
ISO/CD 5001
Cold-reduced carbon steel sheet for vitreous
enamelling
Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries
TC 22
Road vehicles
ISO/CD
13628-7
ISO/CD 6621-4
Internal combustion engines — Piston rings —
Part 4: General specifications
Petroleum and natural gas industries — Design
and operation of subsea production systems
— Part 7: Completion/workover riser systems
TC 70
Internal combustion engines
ISO/CD 6622-2
Internal combustion engines — Piston rings —
Part 2: Rectangular rings made of steel
ISO/CD
4548-15
ISO/CD 6626-2
Internal combustion engines — Piston rings —
Part 2: Coil-spring-loaded oil control rings of
narrow width made of cast iron
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15:
Vibration fatigue test with composite materials
TC 85
Nuclear energy, nuclear technologies,
and radiological protection
ISO/CD
16750-3
Road vehicles — Environmental conditions and
testing for electrical and electronic equipment
— Part 3: Mechanical loads
ISO/CD
11665-9
ISO/CD 20653
Road vehicles — Degrees of protection (IPCode) — Protection of electrical equipment
against foreign objects, water and access
Measurement of radioactivity in the environment — Air — Part 9: Radon-222: determination method of the radon exhalation rate of
dense building materials
ISO/CD
18589-7
TC 23
Tractors and machinery for agriculture
and forestry
Measurement of radioactivity in the environment - Soil — Part 7: Portable in situ gamma
spectrometry measurement
TC 92
Fire safety
ISO/CD
11783-1
Tractors and machinery for agriculture and
forestry — Serial control and communications
data network — Part 1: General standard for
mobile data communication
ISO/CD 19701
Methods for sampling and analysis of fire
effluents
ISO/DTR
26368
Guidance on containment systems for the prevention of pollution arising from uncontrolled
fire water run-off
ISO/CD
11783-3
Tractors and machinery for agriculture and
forestry — Serial control and communications
data network — Part 3: Data link layer
TC 24
Particle characterization including
sieving
ISO/CD
20998-2
Measurement and characterization of particles
by acoustic methods — Part 2: Guidelines for
linear theory
TC 38
Textiles
ISO/DTR
11827
Textiles — Composition testing — Identification
of fibres
ISO Update, Supplement to ISO Focus -- February 2011
TC 98
Bases for design of structures
ISO/CD 13033
Seismic actions on nonstructural components
for building applications
TC 106
Dentistry
ISO/CD 6873
Dental gypsum products
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD
16063-16
Methods for the calibration of vibration and
shock transducers — Part 16: Calibration by
Earth's gravitation
3
TC 123
Plain bearings
TC 201
Surface chemical analysis
ISO/CD 3548-3
Plain bearings — Thin-walled half bearings with
or without flange — Part 3: Measurement of
peripheral length
ISO/CD 13424
Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results for
thin film analysis
TC 130
Graphic technology
TC 204
Intelligent transport systems
ISO/CD
15339-1
Graphic technology — Printing of digital data
— Part 1: Basic principles
ISO/DTS
24533
TC 131
Fluid power systems
ISO/DTS
15640
Hydraulic fluid power contamination control —
General principles and guidelines for selection
and application of hydraulic filters
Intelligent transport systems - Data dictionary
and message set to facilitate the movement
of freight and its intermodal transfer - road
transport information exchanges for supply
chain freight time-sensitive delivery (Road-Air
Freight-Road)
TC 206
Fine ceramics
TC 138
Plastics pipes, fittings and valves for
the transport of fluids
ISO/CD
13383-1
ISO/CD
16486-1
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with
fusion jointing and mechanical jointing — Part
1: General
Fine ceramics (advanced ceramics, advanced
technical ceramics) — Microstructural characterisation — Part 1: Determination of grain size
and size distribution
ISO/CD
13383-2
ISO/CD
16486-2
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with
fusion jointing and mechanical jointing — Part
2: Pipes
Fine ceramics (advanced ceramics, advanced
technical ceramics) — Microstructural characterisation — Part 2: Determination of phase
volume fraction by evaluation of micrographs
ISO/CD 14603
ISO/CD
16486-3
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with
fusion jointing and mechanical jointing — Part
3: Fittings
Fine ceramics (advanced ceramics, advanced
technical ceramics) — Test method for open
hole tension of continuous fiber-reinforced ceramic matrix composites at room temperature
ISO/CD
22197-4
ISO/CD
16486-5
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with
fusion jointing and mechanical jointing — Part
5: Fitness for purpose of the system
Fine ceramics (advanced ceramics, advanced
technical ceramics) — Test method for airpurification performance of semiconducting
photocatalytic materials — Part 4: Removal of
formaldehyde
ISO/CD
22197-5
Fine ceramics (advanced ceramics, advanced
technical ceramics) — Test method for airpurification performance of semiconducting
photocatalytic materials — Part 5: Removal of
methyl mercaptan
ISO/CD
16486-6
Plastics piping systems for the supply of gaseous fuels - Polyamide (PA) piping systems with
fusion jointing and mechanical jointing — Part
6: Code of practice for design, handling and
installation
TC 207
Environmental management
Environmental management — Environmental
performance evaluation — Guidelines
TC 147
Water quality
ISO/CD 14031
ISO/CD
13163-1
Water quality — Measurement of lead 210
activity concentration — Part 1: Liquid scintillation counting method
TC 211
Geographic information/Geomatics
Water quality — Determination of ammonium,
chloride, nitrate, nitrite, orthophosphate, silicate and sulfate by a discrete analysis system
and spectrophotometric detection
ISO/CD
19101-1
Geographic information - Reference model —
Part 1: Fundamentals
ISO/CD
19115-1
Geographic information — Metadata — Part 1:
Fundamentals
ISO/CD
19135-2
Geographic information - Procedures for
item registration — Part 2: XML Schema
Implementation
TC 219
Floor coverings
ISO/CD 16581
Resilient Floor Covering — Determination of
the effect of simulated movement of a furniture
leg
TC 223
Societal Security
ISO/CD 22398
Societal security - Guidelines for exercises and
testing
ISO/CD 15923
ISO/DTS
12869
Water quality — Detection and quantification
of Legionella and/or Legionella pneumophila
by concentration and genic amplification by
polymerase chain reaction (RT-PCR)
TC 172
Optics and photonics
ISO/CD 8600-7
Endoscopes — Medical endoscopes and
endotherapy devices — Part 7: Basic requirements for medical endoscopes of waterresistant type
TC 190
Soil quality
ISO/CD 28258
Soil quality — Recording and exchange of soilrelated data
ISO/CD 16727
Soil quality — Determination of mercury in
aqua regia and nitric acid digests — Cold
vapour atomic fluorescence spectrometry
(CVAFS)
ISO/CD 16729
Soil quality — Digestion of nitric acid soluble
fractions of elements
ISO/CD 16965
Soil quality — Determination of trace elements
using inductively coupled plasma mass spectrometry (ICP-MS)
ISO/CD 17073
Soil quality — Determination of trace elements
in aqua regia and nitric acid digests — Graphite furnace atomic absorption spectrometry
method (GFAAS)
4
TC 229
Nanotechnologies
ISO/DTS
80004-4
Nanotechnologies — Vocabulary — Part 4:
Nanostructured materials
JTC 1
Information technology
ISO/IEC CD
25041
Systems and software engineering — Systems
and software Quality Requirements and Evaluation (SQuaRE) — Evaluation modules
ISO/IEC CD
29169
Information technology — The application of
conformity assessment methodology to process capability and organizational maturity
ISO/IEC PDTR
90003
Software engineering — Guidelines for the
application of ISO 9001:2000 to computer
software
ISO/IEC CD
27037
Guidelines for identification, collection, acquisition and preservation of digital evidence
ISO Update, Supplement to ISO Focus -- February 2011
ISO/IEC CD
29192-3
Information technology — Security techniques
— Lightweight cryptography — Part 3: Stream
ciphers
ISO/DIS 3730
*
Shipbuilding and marine structures — Mooring winches
(Revision of ISO 3730:1988)
2011-06-18
ISO/IEC CD
14496-28
Information technology — Coding of audiovisual objects — Part 28: Composite font
representation
ISO/DIS 7365
*
2011-06-18
ISO/IEC CD
24730-2
Information technology — Automatic and
identification for data capture techniques —
Real-time locating systems (RTLS) — Part 2:
2,4 GHz air interface protocol
Shipbuilding and marine structures — Deck machinery — Towing winches for deep sea use
(Revision of ISO 7365:1983)
ISO/DIS 14859
*
Ships and marine technology Sound reception systems
2011-06-18
ISO/IEC CD
24730-21
Information technology — Real-time locating
systems (RTLS) — Part 21: SO/IEC 24730-2
transmitters operating with a single spread
code and employing a DBPSK data encoding
and BPSK spreading scheme
ISO/IEC CD
24730-22
Information technology — Real-time locating
systems (RTLS) — Part 22: ISO/IEC 24730-2
transmitters operating with multiple spread
codes and employing a QPSK data encoding
and Walsh offset QPSK (WOQPSK) spreading
scheme
TC 17
Steel
ISO/DIS 9364
Continuous hot-dip 55 % aluminium/zinc alloy-coated steel
sheet of commercial, drawing
and structural qualities
(Revision of ISO 9364:2006)
2011-06-22
ISO/DIS 15177
Hot-rolled twin-roll cast carbon
steel sheet of commercial quality
2011-06-22
ISO/DIS 15208
Continuous hot-dip zinc-coated
twin-roll cast steel sheet of commercial quality
2011-06-26
Continuous hot-dip zinc-coated
twin-roll cast steel sheet of
structural quality and high
strength steel
2011-06-22
ISO/IEC
19794-6:2005/
PDAM 1
Information technology — Biometric data
interchange formats — Part 6: Iris image
data — Amendment 1: Conformance testing
methodology
ISO/DIS 15211
ISO/IEC PDTR
29156
Guidance for specifying performance requirements to meet security & usability needs in
applications using biometrics
ISO/DIS
15698-1.2
*
Steel for the reinforcement of
concrete — Headed bars — Part
1: Requirements
2011-03-06
ISO/DIS
15698-2.2
*
Steel for the reinforcement of
concrete — Headed bars — Part
2: Test methods
2011-03-06
TC 20
Aircraft and space vehicles
ISO/DIS 15889
*
Space data and information
transfer systems — The data
description language EAST
specification
(Revision of ISO 15889:2003)
2011-06-06
ISO/DIS 16919
*
Space data and information
transfer systems - Requirements
for bodies providing audit and
certification of candidate trustworthy digital repositories
2011-06-19
ISO/DIS 26871
*
Space systems — Explosive systems and devices
2011-06-29
DIS circulated
Period from 01 January to 31 January 2011
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by
the date shown.
* Available in English only
TC 21
Vote
terminates
TC 2
ISO/DIS 10509
Fasteners
*
TC 6
Hexagon flange head tapping
screws
(Revision of ISO 10509:1992)
ISO/DIS 1974
*
Paper — Determination of
tearing resistance (Elmendorf
method)
(Revision of ISO 1974:1990)
2011-06-14
ISO/DIS 5270
*
Pulps — Laboratory sheets
— Determination of physical
properties
(Revision of ISO 5270:1998)
2011-06-21
ISO/DIS
13073-1
Ships and marine
technology
*
Ships and marine technology Risk assessment on anti-fouling
systems on ships — Part 1:
Marine environmental risk assement method of biocidally active
substances used for anti-fouling
systems on ships
ISO Update, Supplement to ISO Focus -- February 2011
*
Fire detection and alarm systems — Part 5: Point-type heat
detectors
(Revision of ISO 7240-5:2003,
ISO 7240-5:2003/Cor 1:2005)
2011-06-06
ISO/DIS
6182-2
Fire protection — Automatic
sprinkler systems — Part 2: Requirements and test methods for
wet alarm valves, retard chambers and water motor alarms
(Revision of ISO 6182-2:2005)
2011-06-28
ISO/DIS
6182-3
Fire protection — Automatic
sprinkler systems — Part 3:
Requirements and test methods
for dry pipe valves
(Revision of ISO 6182-3:2005)
2011-06-28
ISO/DIS
6182-5
Fire protection — Automatic
sprinkler systems — Part 5:
Requirements and test methods
for deluge valves
(Revision of ISO 6182-5:2006)
2011-06-28
2011-06-25
Paper, board and pulps
TC 8
ISO/DIS
7240-5
Equipment for fire protection and fire fighting
2011-06-06
TC 22
ISO/DIS
14229-2
Road vehicles
*
Road vehicles — Unified diagnostic services (UDS) — Part 2:
Session layer services
2011-07-02
5
ISO/DIS
14229-4
*
Road vehicles — Unified diagnostic services (UDS) — Part
4: Unified diagnostic services
on FlexRay implementation
(UDSonFR)
2011-07-02
ISO/DIS 3517
ISO/DIS
18541-1
*
Road vehicles — Standardized
access to automotive repair and
maintenance information (RMI)
— Part 1: General information
and use case definition
2011-06-21
TC 59
Road vehicles — Functional
safety — Part 10: Guideline on
ISO 26262
2011-03-19
Electrically propelled mopeds
and motorcycles - Safety
specifications
2011-06-15
ISO/DIS
26262-10.2
*
ISO/DIS 13063
*
TC 23
ISO/DIS
15886-3
ISO/DIS 6927
TC 29
Agricultural irrigation equipment
— Sprinklers — Part 3: Characterization of distribution and test
methods
(Revision of ISO 15886-3:2004)
ISO/DIS 27509
*
Coated abrasives — Flap wheels
with incorporated flanges or
separate flanges
(Revision of ISO 5429:2005)
2011-06-06
ISO/DIS 16609
ISO/DIS 6106
*
Abrasive products — Checking
the grit size of superabrasives
(Revision of ISO 6106:2005)
2011-06-26
TC 70
ISO/DIS 6938
ISO/DIS
13629-1
*
Measurement of fluid flow in
closed conduits — Ultrasonic
meters for liquid
*
Textiles — Natural fibres — Generic names and definitions
(Revision of ISO 6938:1984)
2011-06-27
*
Textiles — Determination of antifungal activity of textile products
— Part 1: Luminescence method
2011-06-14
*
Machine tools — Safety — Turning machines — Amendment 1
ISO
5172:2006/
DAmd 1
*
*
Gas welding equipment — Blowpipes for gas welding, heating
and cutting — Specifications
and tests — Amendment 1
2011-06-14
Rubber and rubber
products
ISO 99242:2000/DAmd
1
Rubber and rubber products —
Determination of the composition of vulcanizates and uncured
compounds by thermogravimetry — Part 2: Acrylonitrilebutadiene and halobutyl rubbers
— Amendment 1
TC 54
6
*
Essential oils — Sampling —
Amendment 1
2011-06-18
Petroleum and natural gas
industries — Compact flanged
connections with IX seal ring
2011-06-14
Financial services — Requirements for message authentication using symmetric techniques
(Revision of ISO 16609:2004)
2011-06-06
Internal combustion
engines
*
Reciprocating internal combustion engines — Exhaust emission
measurement — Part 9: Test cycles and test procedures for test
bed measurement of exhaust
gas smoke emissions from compression ignition engines operating under transient conditions
(Revision of ISO 8178-9:2000,
ISO 8178-9:2000/Amd 1:2004)
2011-06-19
Light metals and their
alloys
ISO/DIS
6362-1
*
Wrought aluminium and aluminium alloys — Extruded rods/
bars, tubes and profiles — Part
1: Technical conditions for
inspection and delivery
(Revision of ISO 6362-1:1986)
2011-06-18
ISO/DIS
6362-2
*
Wrought aluminium and aluminium alloys — Extruded rods/
bars, tubes and profiles — Part
2: Mechanical properties
(Revision of ISO 6362-2:1990)
2011-06-18
ISO/DIS
6362-3
*
Wrought aluminium and aluminium alloys — Extruded rods/
bars, tubes and profiles — Part
3: Extruded rectangular bars
— Tolerances on shape and
dimensions
(Revision of ISO 6362-3:2001)
2011-06-18
ISO/DIS
6362-4
*
Wrought aluminium and aluminium alloys — Extruded rods/
bars, tubes and profiles — Part
4: Profiles — Tolerances on
shape and dimensions
(Revision of ISO 6362-4:1988)
2011-06-18
ISO/DIS
6362-5
*
Wrought aluminium and aluminium alloys — Extruded rods/
bars, tubes and profiles — Part
5: Round, square and hexagonal
bars — Tolerances on shape and
dimensions
(Revision of ISO 6362-5:2001)
2011-06-18
2011-07-02
Essential oils
*
2011-06-07
Financial services
2011-06-21
2011-06-07
TC 45
ISO 212:2007/
DAmd 1
*
TC 79
Resistance welding — Destructive tests on welds in metallic
materials — Torsion test of
resistance spot welds
(Revision of ISO 17653:2003)
2011-06-14
Materials, equipment and
offshore structures for petroleum, petrochemical and
natural gas industries
2011-06-29
Welding and allied
processes
2011-06-25
Plastics
Machine tools
TC 44
ISO/DIS 17653
Plastics — Methods of exposure
to laboratory light sources —
Part 2: Xenon-arc lamps
(Revision of ISO 4892-2:2006,
ISO 4892-2:2006/Amd 1:2009)
Textiles
TC 39
ISO
23125:2010/
DAmd 1
ISO/DIS
8178-9
Measurement of fluid flow
in closed conduits
TC 38
*
TC 68
ISO/DIS 5429
ISO/DIS 12242
Buildings and civil engineering
works — Sealants — Vocabulary
(Revision of ISO 6927:1981)
2011-06-12
Small tools
TC 30
*
TC 61
ISO/DIS
4892-2
Oil of neroli (Citrus aurantium
L., syn. Citrus amara Link, syn.
Citrus bigardia Loisel, syn. Citrus
vulgaris Risso)
(Revision of ISO 3517:2002)
Buildings and civil engineering works
TC 67
Tractors and machinery for
agriculture and forestry
*
*
ISO Update, Supplement to ISO Focus -- February 2011
ISO/DIS
6362-6
*
ISO/DIS
6362-7
*
ISO/DIS
6363-1
*
Wrought aluminium and aluminium alloys — Extruded rods/bars,
tubes and profiles — Part 6:
Round, square, rectangular and
hexagonal tubes — Tolerances
on shape and dimensions
2011-06-18
Wrought aluminium and aluminium alloys — Extruded rods/
bars, tubes and profiles — Part
7: Chemical composition
2011-06-18
Wrought aluminium and aluminium alloy cold-drawn rods/
bars, tubes and wires — Part 1:
Technical conditions for inspection and delivery
(Revision of ISO 6363-1:1988,
ISO 6365-1:1988)
2011-06-18
ISO/DIS
6363-2
*
Wrought aluminium and aluminium alloy cold-drawn rods/
bars and tubes and wires — Part
2: Mechanical properties
(Revision of ISO 6363-2:1993)
2011-06-18
ISO/DIS
6363-3
*
Wrought aluminium and aluminium alloy cold-drawn rods/
bars, tubes and wires — Part 3:
Drawn round bars and wires —
Tolerances on form and dimensions (symmetric plus and minus
tolerances on diameter)
(Revision of ISO 5193:1981)
2011-06-18
*
Wrought aluminium and aluminium alloy cold-drawn rods/
bars, tubes and wires — Part
4: Drawn rectangular bars and
wires — Tolerances on form and
dimensions
(Revision of ISO 6363-4:1991)
2011-06-18
ISO/DIS
6363-5
*
Wrought aluminium and aluminium alloy cold-drawn rods/
bars, tubes and wires — Part 5:
Drawn square and hexagonal
bars — Tolerances on form and
dimensions
(Revision of ISO 6363-5:1992)
2011-06-18
ISO/DIS
6363-6
*
Wrought aluminium and aluminium alloy cold-drawn rods/
bars and tubes — Part 6: Drawn
round tubes — Tolerances on
form and dimensions
2011-06-18
ISO/DIS
20785-1
TC 94
Dosimetry for exposures to cosmic radiation in civilian aircraft
— Part 1: Conceptual basis for
measurements
(Revision of ISO 20785-1:2006)
2011-06-28
ISO/DIS 13017
*
Dentistry — Magnetic
attachments
2011-06-21
ISO/DIS 13504
*
Dentistry — General requirements for instruments and related accessories used in dental
implant placement and treatment
2011-06-14
ISO/DIS
21672-1
*
Dentistry — Periodontal probes
— Part 1: General requirements
2011-06-21
ISO/DIS
21672-2
*
Dentistry — Periodontal probes
— Part 2: Designation
2011-06-14
ISO/DIS
20126.2
*
Dentistry — Manual toothbrushes — General requirements and
test methods
(Revision of ISO 20126:2005)
2011-03-21
Mechanical vibration,
shock and condition
monitoring
ISO/DIS
18312-2
*
Mechanical vibration and shock
— Measurement of vibration
power flow from machines into
connected support structures —
Part 2: Indirect method
2011-06-14
ISO/DIS
18436-1
*
Condition monitoring and diagnostics of machines — Requirements for qualification and
assessment of personnel — Part
1: Requirements for assessment
bodies and the assessment
process
(Revision of ISO 18436-1:2004,
ISO 18436-1:2004/Cor 1:2006)
2011-06-06
ISO/DIS
18436-2
*
Condition monitoring and diagnostics of machines — Requirements for qualification and
assessment of personnel — Part
2: Vibration condition monitoring
(Revision of ISO 18436-2:2003)
2011-06-14
TC 122
Packaging
*
Packaging — Transport packaging for dangerous goods —
Plastics compatibility testing for
packaging and IBCs
*
Hydraulic fluid power - Cleanliness of parts and components Expression of level of particulate
contamination
ISO/DIS 16810
*
Non-destructive testing —
Ultrasonic testing — General
principles
2011-06-25
ISO/DIS 16811
*
Non-destructive testing — Ultrasonic testing — Sensitivity and
range setting
2011-06-25
ISO/DIS 16823
*
Non-destructive testing — Ultrasonic testing — Transmission
technique
2011-06-25
ISO/DIS 16826
*
Non-destructive testing — Ultrasonic testing — Examination for
discontinuities perpendicular to
the surface
2011-06-25
ISO/DIS 16827
*
Non-destructive testing — Ultrasonic testing — Characterization
and sizing of discontinuities
2011-06-25
TC 135
Personal protective equipment
— Test methods for sunglasses
and related equipment
2011-06-21
ISO/DIS
12609-1
*
Eyewear for protection against
intense light sources used on humans and animals for cosmetic
and medical applications — Part
1: Specification for products
2011-06-16
Eyewear for protection against
intense light sources used on humans and animals for cosmetic
and medical applications — Part
2: Guidance for use
2011-06-16
2011-06-07
Fluid power systems
2011-06-19
*
ISO Update, Supplement to ISO Focus -- February 2011
Dentistry — Digitizing devices
used in CAD/CAM systems —
Test methods for assessing the
accuracy and precision
ISO/DIS 21017
Personal safety -- Protective clothing and
equipment
*
*
TC 131
ISO/DIS 12311
ISO/DIS
12609-2
ISO/DIS 12836
ISO/DIS 13274
Nuclear energy, nuclear
technologies, and radiological protection
*
Dentistry
TC 108
ISO/DIS
6363-4
TC 85
TC 106
2011-06-22
Non-destructive testing
7
ISO/DIS 16828
ISO/DIS 16831
*
*
TC 142
ISO/DIS
10121-2
*
Non-destructive testing — Ultrasonic testing — Characterization
and verification of ultrasonic
thickness measuring equipment
2011-06-25
Test methods for assessing the
performance of gas-phase air
cleaning media and devices for
general ventilation — Part 2:
Gas phase air cleaning devices
(GPACD)
2011-06-21
Graphical symbols — Safety
colours and safety signs — Part
3: Design principles for graphical
symbols for use in safety signs
(Revision of ISO 3864-3:2006)
2011-06-12
Indoor air of road vehicles —
Part 2: Screening method for the
determination of the emissions
of volatile organic compounds
from vehicle interior parts and
materials — Bag method
*
Water quality — Vocabulary —
Part 2: — Amendment 1
ISO
14630:2008/
DAmd 1
*
Non-active surgical implants —
General requirements — Amendment 1
2011-06-21
ISO/DIS
13175-3
*
Implants for surgery — Calcium
phosphates — Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes
2011-06-21
ISO/DIS
25832-1
*
Implants for surgery — Seamless
tubes for surgical implants —
Part 1: Materials based on iron
2011-06-29
ISO/DIS
9714-1
*
Orthopaedic drilling instruments
— Part 1: Drill bits, taps and
countersink cutters
(Revision of ISO 9714-1:1991)
2011-06-14
TC 147
*
Microscopes — Marking of
objectives and eyepieces
(Revision of ISO 8578:1997, ISO
8578:1997/Cor 1:2002)
2011-06-12
ISO/DIS
8598-1.2
*
Optics and optical instruments
— Focimeters — Part 1: General
purpose instruments
(Revision of ISO 8598:1996, ISO
8598:1996/Cor 1:1998)
2011-03-14
ISO 119797:2006/DAmd
1
*
Ophthalmic implants — Intraocular lenses — Part 7: Clinical
investigations — Amendment 1
2011-06-28
ISO/DIS 11987
*
Ophtalmic optics — Contact
lenses — Determination of
shelf-life
(Revision of ISO 11987:1997,
ISO 11987:1997/Cor 1:1998)
2011-06-21
ISO/DIS 19980
*
Ophthalmic instruments — Corneal topographers
(Revision of ISO 19980:2005)
2011-06-21
Automation systems and
integration
2011-06-21
ISO/DIS
14649-13
*
Industrial automation systems
and integration — Physical
device control — Data model for
computerized numerical controllers — Part 13: Process data for
wire electrical discharge machining (wire-EDM)
2011-06-20
2011-06-14
ISO/DIS
14649-14
*
Industrial automation systems
and integration — Physical
device control — Data model for
computerized numerical controllers — Part 14: Process data for
sink electrical discharge machining (sink-EDM)
2011-06-20
ISO/DIS 16180
*
Small craft — Navigation lights
— Installation and placement
2011-06-14
ISO/DIS 25197
*
Small craft — Electrical/electronic control system for steering,
shift and throttle
2011-06-21
*
Hydrogen fuel — Product
specification — Part 2: Proton
exchange membrane (PEM)
fuel cell applications for road
vehicles
(Revision of ISO/TS
14687-2:2008)
Implants for surgery
TC 156
Corrosion of metals and
alloys
ISO/DIS 17752
Corrosion of metals and alloys
— Procedures to determine and
estimate runoff rates of metals
from materials as a result of
atmospheric corrosion
TC 164
*
Metallic materials — Wire —
Simple torsion test
(Revision of ISO 7800:2003)
Timber structures
ISO/DIS
22389-2
Timber structures - Bending
applications of I-beams — Part
2: Component performance and
production requirements
TC 171
Document management
applications
ISO/DIS
14641-1
Electronic document management — Design and operation
of an information system for the
preservation of electronic documents — Part 1: Specification
TC 188
Small craft
TC 197
ISO/DIS
14687-2
Hydrogen technologies
2011-06-27
TC 207
ISO/DIS 14045
Mechanical testing of
metals
TC 165
8
ISO/DIS 8578
Water quality
TC 150
ISO/DIS 7800
Optics and photonics
TC 184
Air quality
*
ISO 61072:2006/DAmd
1
TC 172
Graphical symbols
*
TC 146
ISO/DIS
12219-2
2011-06-25
Cleaning equipment for air
and other gases
TC 145
ISO/DIS
3864-3
Non-destructive testing —
Ultrasonic testing — Time-offlight diffraction technique as a
method for detection and sizing
of discontinuities
2011-06-06
2011-06-27
Environmental
management
*
TC 211
ISO/DIS 19152
ISO/DIS 15189
Environmental management —
Eco-efficiency assessment of
product systems — Principles,
requirements and guidelines
2011-06-21
Geographic information/
Geomatics
*
TC 212
2011-06-28
2011-06-06
Geographic information — Land
Administration Domain Model
(LADM)
2011-06-21
Clinical laboratory testing
and in vitro diagnostic test
systems
*
Medical laboratories — Requirements for quality and
competence
(Revision of ISO 15189:2007)
2011-06-07
ISO Update, Supplement to ISO Focus -- February 2011
ISO/DIS 15197
*
TC 215
ISO/DIS 13119
*
Period from 01 January to 31 January 2011
2011-06-28
Carpets — Determination of tuft
withdrawal force
(Revision of ISO 4919:1978)
*
Performance criteria for authentication solutions for anti-counterfeiting in the field of material
goods
TC 2
ISO/FDIS 2702
Conformity assessment — General criteria for the operation of
various types of bodies performing inspection
(Revision of ISO/IEC
17020:1998)
ISO/FDIS
10376
2011-06-14
*
2011-06-22
Information technology — Telecommunications and information exchange between systems
— High rate 60 GHz PHY, MAC
and PALs
(Revision of ISO/IEC
13156:2009)
2011-06-28
ISO/IEC DIS
18052
Information technology — Telecommunications and information exchange between systems
— Protocol for Computer
Supported Telecommunications
Applications (CSTA) Phase III
(Revision of ISO/IEC
18052:2000)
2011-06-28
ISO/IEC DIS
16963
Information technology — Digitally recorded media for information interchange and storage —
Test method for the estimation
of lifetime of optical media for
long-term data storage
2011-07-01
ISO/IEC DIS
28360
Information technology — Office
equipment — Determination of
chemical emission rates from
electronic equipment
(Revision of ISO/IEC
28360:2007, ISO/IEC
28360:2007/Cor 1:2008)
2011-06-28
Information technology —
Common Biometric Exchange
Formats Framework — Part 2:
Procedures for the operation
of the Biometric Registration
Authority
(Revision of ISO/IEC 197852:2006, ISO/IEC 19785-2:2006/
Amd 1:2010)
2011-05-25
2011-03-28
Pulps — Determination of mass
fraction of fines
2011-03-26
Quantities and units
*
TC 17
Information technology — Open
Systems Interconnection — Procedures for the operation of OSI
Registration Authorities: General
procedures and top arcs of the
International Object Identifier
tree — Part 1:
(Revision of ISO/IEC
9834-1:2008)
Heat-treated steel tapping
screws — Mechanical properties
(Revision of ISO 2702:1992)
Paper, board and pulps
TC 12
ISO 800009:2009/FDAmd
1
ISO/IEC DIS
9834-1
ISO Update, Supplement to ISO Focus -- February 2011
*
TC 6
Information technology
ISO/IEC DIS
19785-2
Fasteners
2011-06-14
Committee on conformity
assessment
*
Vote
terminates
2011-06-14
JTC 1
ISO/IEC DIS
13156
These Final draft International Standards have been submitted to the
ISO member bodies for formal approval by the date shown
* Available in English only
Project committee: Anticounterfeiting tools
CASCO
ISO/IEC DIS
17020
Health informatics — Clinical knowledge resources
— Metadata
FDIS circulated
Floor coverings
*
TC 246
ISO/DIS 12931
2011-06-28
Health informatics
TC 219
ISO/DIS 4919
In vitro diagnostic test systems
— Requirements for bloodglucose monitoring systems for
self-testing in managing diabetes
mellitus
(Revision of ISO 15197:2003)
Quantities and units — Part 9:
Physical chemistry and molecular physics — Amendment 1
2011-03-12
Steel
ISO/FDIS
9328-1
*
Steel flat products for pressure
purposes — Technical delivery
conditions — Part 1: General
requirements
(Revision of ISO 9328-1:2003)
2011-03-21
ISO/FDIS
9328-2
*
Steel flat products for pressure
purposes — Technical delivery
conditions — Part 2: Non-alloy
and alloy steels with specified
elevated temperature properties
(Revision of ISO 9328-2:2004)
2011-03-21
ISO/FDIS
9328-3
*
Steel flat products for pressure
purposes — Technical delivery
conditions — Part 3: Weldable
fine grain steels, normalized
(Revision of ISO 9328-3:2004,
ISO 9328-3:2004/DAmd 1)
2011-03-21
ISO/FDIS
9328-4
*
Steel flat products for pressure
purposes — Technical delivery
conditions — Part 4: Nickelalloy steels with specified low
temperature properties
(Revision of ISO 9328-4:2004,
ISO 9328-4:2004/DAmd 1)
2011-03-21
ISO/FDIS
9328-5
*
Steel flat products for pressure
purposes — Technical delivery
conditions — Part 5: Weldable
fine grain steels, thermomechanically rolled
(Revision of ISO 9328-5:2004,
ISO 9328-5:2004/DAmd 1)
2011-03-21
ISO/FDIS
9328-6
*
Steel flat products for pressure
purposes — Technical delivery
conditions — Part 6: Weldable
fine grain steels, quenched and
tempered
(Revision of ISO 9328-6:2004,
ISO 9328-6:2004/DAmd 1)
2011-03-21
ISO/FDIS
9328-7
*
Steel flat products for pressure
purposes — Technical delivery
conditions — Part 7: Stainless
steels
(Revision of ISO 9328-7:2004)
2011-03-21
9
TC 23
ISO/FDIS
11783-5
ISO/FDIS
14223-1
Tractors and machinery for
agriculture and forestry
*
*
TC 28
ISO/FDIS
20884
*
*
*
ISO/FDIS
18275
*
10
Black tea — Definition and basic
requirements
(Revision of ISO 3720:1986,
ISO 3720:1986/Cor 1:1992, ISO
3720:1986/Cor 2:2004)
Paints and varnishes — Corrosion protection by protective
paint systems — Assessment of
porosity in a dry film
Textiles — Preparation, marking and measuring of fabric
specimens and garments in tests
for determination of dimensional
change
(Revision of ISO 3759:2007)
Test code for machine tools
— Part 10: Determination of
the measuring performance of
probing systems of numerically
controlled machine tools
*
*
Plastics — Determination of
dynamic mechanical properties
— Part 1: General principles
(Revision of ISO 6721-1:2001,
ISO 6721-1:2001/DAmd 1)
2011-04-21
ISO/FDIS
10927
*
Plastics — Determination of the
molecular mass and molecular
mass distribution of polymer
species by matrix-assisted laser
desorption/ionization timeof-flight mass spectrometry
(MALDI-TOF-MS)
2011-03-14
ISO/FDIS
294-5
*
Plastics — Injection moulding of
test specimens of thermoplastic
materials — Part 5: Preparation of standard specimens for
investigating anisotropy
(Revision of ISO 294-5:2001, ISO
294-5:2001/Amd 1:2004, ISO
294-5:2001/Cor 1:2003)
2011-03-20
TC 67
*
ISO/FDIS
10414-2
TC 89
Welding consumables — Covered electrodes for manual metal
arc welding of high-strength
steels — Classification
(Revision of ISO 18275:2005,
ISO 18275:2005/Cor 1:2007)
2011-03-18
Petroleum and natural gas industries — Field testing of drilling
fluids — Part 2: Oil-based fluids
(Revision of ISO 10414-2:2002)
2011-03-28
Wood-based panels
ISO/FDIS
10033-1
*
Laminated Veneer Lumber (LVL)
— Bonding quality — Part 1:
Test methods
2011-03-22
ISO/FDIS
10033-2
*
Laminated Veneer Lumber (LVL)
— Bonding quality — Part 2:
Requirements
2011-03-22
TC 94
2011-04-14
Rubber and plastics hoses and
hose assemblies — Ratios of
proof and burst pressure to
maximum working pressure —
Amendment 1: Replacement of
"design working pressure" by
"maximum working pressure"
throughout text
*
2011-03-28
ISO/FDIS
27065
Personal safety -- Protective clothing and
equipment
*
TC 106
ISO
21671:2006/
FDAmd 1
Protective clothing — Performance requirements for protective clothing worn by operators
applying liquid pesticides
2011-03-21
Dentistry
*
TC 108
Rubber and rubber
products
*
Materials, equipment and
offshore structures for petroleum, petrochemical and
natural gas industries
2011-03-14
Welding consumables — Test
methods — Part 3: Classification testing of positional capacity
and root penetration of welding
consumables in a fillet weld
(Revision of ISO 15792-3:2000,
ISO 15792-3:2000/Cor 1:2006)
2011-03-14
ISO/FDIS
6721-1
2011-04-01
2011-03-22
Gas cylinders — Refillable
seamless aluminium alloy gas
cylinders — Design, construction
and testing
(Revision of ISO 7866:1999)
Plastics
2011-03-21
Welding and allied
processes
TC 45
ISO
7751:1991/
FDAmd 1
Petroleum products — Determination of sulfur content of
automotive fuels — Wavelengthdispersive X-ray fluorescence
spectrometry
(Revision of ISO 20884:2004)
Machine tools
TC 44
ISO/FDIS
15792-3
2011-03-08
Textiles
TC 39
ISO/FDIS
230-10
Radiofrequency identification of
animals — Advanced transponders — Part 1: Air interface
(Revision of ISO 14223-1:2003,
ISO 14223-1:2003/CD Amd 1)
*
TC 61
Paints and varnishes
TC 38
ISO/FDIS 3759
2011-03-15
Gas cylinders
Food products
*
TC 35
ISO/FDIS
29601
ISO/FDIS 7866
Tractors and machinery for
agriculture and forestry — Serial control and communications
data network — Part 5: Network
management
(Revision of ISO 11783-5:2001,
ISO 11783-5:2001/Cor 1:2002)
Petroleum products and
lubricants
TC 34
ISO/FDIS 3720
TC 58
Dentistry — Rotary polishers —
Amendment 1
2011-03-28
Mechanical vibration,
shock and condition
monitoring
ISO/FDIS
18437-5
*
Mechanical vibration and shock
— Characterization of the dynamic mechanical properties of
visco-elastic materials — Part 5:
Poisson ratio based on comparison between measurements and
finite element analysis
2011-03-26
ISO/FDIS
29821-1
*
Condition monitoring and
diagnostics of machines —
Ultrasound — Part 1: General
guidelines
2011-04-01
2011-03-28
ISO Update, Supplement to ISO Focus -- February 2011
TC 118
ISO/FDIS
28927-10
Compressors and pneumatic tools, machines and
equipment
*
TC 120
ISO/FDIS
14930
*
*
*
ISO/FDIS
16589-3
*
*
*
TC 138
ISO
7010:2003/
FDAmd 82
*
Graphical symbols — Safety colours and safety signs — Safety
signs used in workplaces and
public areas — Amendment 82:
Safety sign P032: Do not use for
face grinding
2011-03-18
*
Stationary source emissions
— Manual method for the
determination of the methane concentration using gas
chromatography
ISO/FDIS
28540
*
Water quality — Determination of
16 polycyclic aromatic hydrocarbons (PAH) in water — Method
using gas chromatography with
mass spectrometric detection
(GC-MS)
2011-03-13
ISO/FDIS
5667-13
*
Water quality — Sampling —
Part 13: Guidance on sampling
of sludges
(Revision of ISO 5667-13:1997)
2011-04-04
ISO/FDIS
25139
Air quality
2011-03-13
2011-03-21
Rotary shaft lip-type seals incorporating thermoplastic sealing
elements — Part 1: Nominal
dimensions and tolerances
(Revision of ISO 16589-1:2001)
2011-03-18
Rotary shaft lip-type seals incorporating thermoplastic sealing
elements — Part 3: Storage,
handling and installation
(Revision of ISO 16589-3:2001)
2011-03-18
TC 147
Rotary shaft lip-type seals incorporating thermoplastic sealing
elements — Part 4: Performance
test procedures
(Revision of ISO 16589-4:2001)
2011-03-18
Rotary shaft lip-type seals incorporating thermoplastic sealing
elements — Part 5: Identification
of visual imperfections
(Revision of ISO 16589-5:2001)
2011-03-18
*
Multilayer piping systems for
hot and cold water installations
inside buildings — Part 2: Pipes
— Amendment 1
2011-03-28
ISO/FDIS
21751
*
Plastics pipes and fittings —
Decohesion test of electrofusion
assemblies — Strip-bend test
2011-03-07
ISO/FDIS
3864-1
*
Graphical symbols — Safety
colours and safety signs — Part
1: Design principles for safety
signs and safety markings
(Revision of ISO 3864-1:2002)
2011-03-20
ISO
7010:2003/
FDAmd 78
*
Graphical symbols — Safety
colours and safety signs —
Safety signs used in workplaces
and public areas — Amendment
78: Safety sign M025: Protect
infants' eyes with opaque eye
protection
2011-03-18
Graphical symbols — Safety colours and safety signs — Safety
signs used in workplaces and
public areas — Amendment 79:
Safety sign M026: Use protective
apron
2011-03-18
ISO Update, Supplement to ISO Focus -- February 2011
2011-03-08
ISO/FDIS
25841
*
Female condoms — Requirements and test methods
2011-03-14
ISO/FDIS
29942
*
Prophylactic dams — Requirements and test methods
2011-03-18
ISO/FDIS 1352
Mechanical testing of
metals
*
Metallic materials — Torquecontrolled fatigue testing
(Revision of ISO 1352:1977)
ISO/FDIS
14997
*
Optics and photonics — Test
methods for surface imperfections on optical elements
(Revision of ISO 14997:2003)
2011-03-26
ISO/FDIS
13212
*
Ophthalmic optics — Contact
lens care products — Guidelines
for determination of shelf-life
(Revision of ISO 13212:1999)
2011-04-21
ISO/FDIS
14534
*
Ophthalmic optics — Contact
lenses and contact lens care
products — Fundamental
requirements
(Revision of ISO 14534:2002)
2011-03-07
TC 172
TC 184
ISO/FDIS
10218-1
2011-03-20
Optics and photonics
Graphical symbols
*
Implants for surgery — Partial
and total hip joint prostheses
— Part 2: Articulating surfaces
made of metallic, ceramic and
plastics materials
(Revision of ISO 7206-2:1996)
Non-systemic contraceptives and STI barrier
prophylactics
TC 164
*
TC 145
Implants for surgery
TC 157
Plastics pipes, fittings and
valves for the transport of
fluids
2011-03-14
Water quality
TC 150
ISO/FDIS
7206-2
ISO 210032:2008/FDAmd
1
ISO
7010:2003/
FDAmd 79
2011-03-18
Fluid power systems
ISO/FDIS
16589-1
ISO/FDIS
16589-5
Plain bearings — Hardness testing of bearing metals — Part 2:
Solid materials
(Revision of ISO 4384-2:1982)
Graphical symbols — Safety colours and safety signs — Safety
signs used in workplaces and
public areas — Amendment 81:
Safety sign P031: Do not alter
the state of the switch
TC 146
Plain bearings
TC 131
ISO/FDIS
16589-4
Leather — Leather for dress
gloves — Specification
*
2011-03-21
Leather
TC 123
ISO/FDIS
4384-2
Hand-held portable power tools
— Test methods for evaluation
of vibration emission — Part 10:
Percussive drills, hammers and
breakers
(Revision of ISO 8662-2:1992,
ISO 8662-3:1992, ISO 86625:1992, ISO 8662-2:1992/Amd
1:1999, ISO 8662-3:1992/Amd
1:1999, ISO 8662-5:1992/Amd
1:1999)
ISO
7010:2003/
FDAmd 81
Automation systems and
integration
*
Robots and robotic devices —
Safety requirements — Part 1:
Industrial robots
(Revision of ISO 10218-1:2006,
ISO 10218-1:2006/Cor 1:2007)
2011-03-21
11
ISO/FDIS
10218-2.2
*
Robots and robotic devices —
Safety requirements — Part 2:
Industrial robot systems and
integration
*
Soil quality — Gas chromatographic determination of volatile
aromatic and halogenated hydrocarbons and selected ethers
— Static headspace method
(Revision of ISO 22155:2005)
TC 190
ISO/FDIS
22155
*
Washer-disinfectors — Part
6: Requirements and tests for
washer-disinfectors employing
thermal disinfection for non-invasive, non-critical medical devices
and healthcare equipment
Building environment
design
*
Interconnection of information
technology equipment — Control Network Protocol — Part 1:
Protocol Stack
2011-03-05
ISO/FDIS
14908-2
*
Interconnection of information
technology equipment — Control Network Protocol — Part 2:
Twisted-pair communication
2011-03-05
ISO/FDIS
14908-3
*
Interconnection of information
technology equipment — Control Network Protocol — Part 3:
Power line channel specification
2011-03-05
Interconnection of information
technology equipment — Control
Network Protocol — Part 4: IP
communication
2011-03-05
*
TC 207
Environmental
management
*
TC 213
ISO
1101:2004/
FDAmd 1
ISO/FDIS
10360-7
Greenhouse gases — Competence requirements for greenhouse gas validation teams and
verification teams
2011-03-18
Dimensional and geometrical product specifications
and verification
*
*
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form,
orientation, location and run-out
— Amendment 1: Representation of specifications in the form
of a 3D model
2011-03-14
Geometrical product specifications (GPS) — Acceptance and
reverification tests for coordinate
measuring machines (CMMs)
— Part 7: CMMs equipped with
imaging probing systems
2011-03-07
ISO/FDIS
13385-1
*
Geometrical product specifications (GPS) — Dimensional
measuring equipment — Part 1:
Callipers; Design and metrological characteristics
(Revision of ISO 3599:1976, ISO
6906:1984)
2011-03-28
ISO/FDIS
13385-2
*
Geometrical product specifications (GPS) — Dimensional
measuring equipment — Part 2:
Calliper depth gauges; Design
and metrological characteristics
(Revision of ISO 3599:1976, ISO
6906:1984)
2011-03-28
12
Geometrical product specifications (GPS) — Inspection by
measurement of workpieces and
measuring equipment — Part
2: Guidance for the estimation
of uncertainty in GPS measurement, in calibration of measuring equipment and in product
verification
(Revision of ISO/TS 142532:1999, ISO/TS 14253-2:1999/
Cor 1:2007)
2011-03-14
ISO/FDIS
14253-3
*
Geometrical product specifications (GPS) — Inspection by
measurement of workpieces
and measuring equipment —
Part 3: Guidelines for achieving
agreements on measurement
uncertainty statements
(Revision of ISO/TS
14253-3:2002)
2011-03-14
ISO/FDIS
16610-21
*
Geometrical product specifications (GPS) — Filtration — Part
21: Linear profile filters: Gaussian filters
(Revision of ISO 11562:1996)
2011-04-02
*
Health informatics — Requirements for an electronic health
record architecture
(Revision of ISO/TS 18308:2004)
*
Clay geosynthetic barriers —
Determination of permeability to
gases
2011-03-21
ISO/FDIS
14908-1
ISO/FDIS
14066
*
2011-03-05
Sterilization of health care
products
TC 205
ISO/FDIS
14908-4
ISO/FDIS
14253-2
Soil quality
TC 198
ISO/FDIS
15883-6
2011-03-21
TC 215
ISO/FDIS
18308
Health informatics
TC 221
ISO/FDIS
10773
2011-03-26
Geosynthetics
TMB
Technical Management
Board
ISO/IEC FDIS
80079-34
Explosive atmospheres — Part
34: Application of quality systems for equipment manufacture
JTC 1
Information technology
2011-03-28
2011-03-26
ISO/IEC FDIS
29103
*
Information technology — Office
equipment — Colour photo test
pages for measurement of ink
cartridge yield for colour photo
printing
2011-04-01
ISO/IEC
14492:2001/
FDAmd 3
*
Information technology — Lossy/
lossless coding of bi-level images — Amendment 3: Extension to colour coding
2011-03-05
ISO/IEC FDIS
14496-25
*
Information technology — Coding of audio-visual objects —
Part 25: 3D Graphics Compression Model
(Revision of ISO/IEC 1449625:2009, ISO/IEC 1449625:2009/DAM 1)
2011-04-01
ISO/IEC FDIS
23005-1
*
Information technology — Media
context and control — Part 1:
Architecture
2011-03-07
ISO Update, Supplement to ISO Focus -- February 2011
TC 34
Food products
ISO/TS 111332:2003/Amd
1:2011
Microbiology of food and animal feeding stuffs — Guidelines on preparation and production of culture media
— Part 2: Practical guidelines on
performance testing of culture media
— Amendment 1: Test microorganisms
for commonly used culture media
XZ
ISO 3656:2011
Animal and vegetable fats and oils —
Determination of ultraviolet absorbance
expressed as specific UV extinction
D
Price
group
TC 35
Paints and varnishes
ISO 1519:2011
Paints and varnishes — Bend test
(cylindrical mandrel)
F
TC 43
Standards published
New International Standards published between 01 January and 31
January 2011
* Available in English only
** French version of standard previously published in English only
TC 6
Paper, board and pulps
ISO
5264-2:2011
Pulps — Laboratory beating — Part 2:
PFI mill method
TC 10
Technical product
documentation
ISO
12756:1998/
Amd 1:2011
*
TC 17
ISO 3575:2011
Drawing and writing instruments —
Ball point pens and roller ball pens —
Vocabulary — Amendment 1: Viscosity
of the writing fluid
*
Acoustics
ISO
10302-1:2011
*
Acoustics — Measurement of airborne
noise emitted and structure-borne
vibration induced by small air-moving
devices — Part 1: Airborne noise
measurement
R
ISO
10844:2011
*
Acoustics — Specification of test
tracks for measuring noise emitted by
road vehicles and their tyres
T
XZ
Steel
Continuous hot-dip zinc-coated carbon
steel sheet of commercial and drawing
qualities
H
TC 44
Welding and allied processes
ISO
3581:2003/
Amd 1:2011
Welding consumables — Covered
electrodes for manual metal arc welding of stainless and heat-resisting
steels — Classification — Amendment
1
ISO
15626:2011
Non-destructive testing of welds —
Time-of-flight diffraction technique
(TOFD) — Acceptance levels
TC 58
Gas cylinders
ISO
10961:2010
Gas cylinders — Cylinder bundles
— Design, manufacture, testing and
inspection
Buildings and civil engineering
works
ISO 4998:2011
*
Continuous hot-dip zinc-coated carbon
steel sheet of structural quality
G
ISO 4999:2011
*
Continuous hot-dip terne (lead alloy)
coated cold-reduced carbon steel
sheet of commercial, drawing and
structural qualities
K
ISO 5000:2011
*
Continuous hot-dip aluminium-siliconcoated cold-reduced carbon steel
sheet of commercial and drawing
qualities
H
E
XZ
F
K
ISO
14788:2011
*
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
J
TC 59
ISO
16160:2011
*
Continuously hot-rolled steel sheet
products — Dimensional and shape
tolerances
C
ISO
10845-2:2011
*
Construction procurement — Part 2:
Formatting and compilation of procurement documentation
S
ISO
10845-3:2011
*
Construction procurement — Part 3:
Standard conditions of tender
U
ISO
10845-4:2011
*
Construction procurement — Part 4:
Standard conditions for the calling for
expressions of interest
K
ISO
10845-5:2011
*
Construction procurement — Part 5:
Participation of targeted enterprises in
contracts
T
ISO
10845-6:2011
*
Construction procurement — Part 6:
Participation of targeted partners in
joint ventures in contracts
S
ISO
10845-7:2011
*
Construction procurement — Part 7:
Participation of local enterprises and
labour in contracts
R
R
ISO
10845-8:2011
*
Construction procurement — Part
8: Participation of targeted labour in
contracts
N
TC 22
Road vehicles
ISO
12251:2011
*
ISO 7116:2011
*
Diesel engines — Clamp mounted CR
fuel injectors — Mounting dimensions
E
Mopeds — Measurement method for
determining maximum speed
J
TC 25
Cast irons and pig irons
ISO/TR
945-2:2011
Microstructure of cast irons — Part
2: Graphite classification by image
analysis
TC 28
Petroleum products and
lubricants
G
ISO 3405:2011
*
Petroleum products — Determination
of distillation characteristics at atmospheric pressure
ISO
3987:2010/Cor
1:2011
*
Petroleum products — Determination
of sulfated ash in lubricating oils and
additives — Technical Corrigendum 1
free
ISO
20783-1:2011
*
Petroleum and related products —
Determination of emulsion stability of
fire-resistant fluids — Part 1: Fluids in
category HFAE
D
Petroleum and related products —
Determination of pH of fire-resistant
fluids within categories HFAE, HFAS
and HFC
B
ISO
20843:2011
ISO Update, Supplement to ISO Focus -- February 2011
TC 61
Plastics
ISO
14125:1998/
Amd 1:2011
Fibre-reinforced plastic composites —
Determination of flexural properties —
Amendment 1
TC 79
Light metals and their alloys
ISO 8251:2011
Anodizing of aluminium and its alloys
— Measurement of abrasion resistance
of anodic oxidation coatings
XZ
N
13
TC 85
Nuclear energy, nuclear technologies, and radiological
protection
ISO
27048:2011
Radiation protection — Dose assessment for the monitoring of workers for
internal radiation exposure
TC 92
Fire safety
ISO 119252:2010/Cor
1:2011
*
ISO
12863:2010/
Cor 1:2011
W
Reaction to fire tests — Ignitability of
products subjected to direct impingement of flame — Part 2: Single-flame
source test — Technical Corrigendum
1
free
Standard test method for assessing
the ignition propensity of cigarettes —
Technical Corrigendum 1
free
Dentistry
ISO
28399:2011
Dentistry — Products for external tooth
bleaching
TC 107
Metallic and other inorganic
coatings
ISO
26945:2011
Metallic and other inorganic coatings — Electrodeposited coatings of
tin-cobalt alloy
E
ISO
28706-1:2008
Vitreous and porcelain enamels — Determination of resistance to chemical
corrosion — Part 1: Determination of
resistance to chemical corrosion by
acids at room temperature
C
Vitreous and porcelain enamels — Determination of resistance to chemical
corrosion — Part 2: Determination of
resistance to chemical corrosion by
boiling acids, boiling neutral liquids
and/or their vapours
H
Vitreous and porcelain enamels — Determination of resistance to chemical
corrosion — Part 3: Determination of
resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
E
Vitreous and porcelain enamels — Determination of resistance to chemical
corrosion — Part 4: Determination of
resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
F
Vitreous and porcelain enamels —
Glass-lined apparatus for process
plants — Part 1: Quality requirements
for apparatus, components, appliances
and accessories
K
Vitreous and porcelain enamels —
Glass-lined apparatus for process
plants — Part 2: Designation and
specification of resistance to chemical
attack and thermal shock
B
ISO
28721-3:2008
Vitreous and porcelain enamels —
Glass-lined apparatus for process
plants — Part 3: Thermal shock
resistance
D
TC 108
Mechanical vibration, shock and
condition monitoring
ISO
10816-7:2009
Mechanical vibration — Evaluation
of machine vibration by measurements on non-rotating parts — Part
7: Rotodynamic pumps for industrial
applications, including measurements
on rotating shafts
ISO
28706-3:2008
ISO
28706-4:2008
ISO
28721-1:2008
ISO
28721-2:2008
TC 114
IEC
60086-3:2011
14
Compressors and pneumatic
tools, machines and equipment
ISO
28927-11:2011
Hand-held portable power tools — Test
methods for evaluation of vibration
emission — Part 11: Stone hammers
TC 119
Powder metallurgy
ISO 3927:2011
Metallic powders, excluding powders
for hardmetals — Determination of
compressibility in uniaxial compression
D
Hardmetals — Abrasion tests for
hardmetals
G
ISO
28080:2011
TC 106
ISO
28706-2:2008
TC 118
G
*
TC 121
Anaesthetic and respiratory
equipment
ISO 5364:2008
Anaesthetic and respiratory equipment
— Oropharyngeal airways
TC 159
Ergonomics
ISO
24503:2011
Ergonomics — Accessible design
--Tactile dots and bars on consumer
products
TC 163
Thermal performance and energy use in the built environment
Primary batteries — Part 3: Watch
batteries
C
*
Thermal insulating products for building equipment and industrial installations — Determination of short-term
water absorption by partial immersion
of preformed pipe insulation
F
ISO
12624:2011
*
Thermal insulating products for building equipment and industrial installations — Determination of trace quantities of water soluble chloride, fluoride,
silicate, sodium ions and pH
H
ISO
12628:2011
*
Thermal insulating products for building equipment and industrial installations — Determination of dimensions,
squareness and linearity of preformed
pipe insulation
E
ISO
12629:2011
*
Thermal insulating products for building equipment and industrial installations — Determination of water vapour
transmission properties of preformed
pipe insulation
F
TC 173
ISO
15621:2011
Assistive products for persons
with disability
*
Urine-absorbing aids — General guidelines on evaluation
TC 194
Biological evaluation of medical
devices
ISO
14155:2011
Clinical investigation of medical
devices for human subjects — Good
clinical practice
TC 199
Safety of machinery
F
U
ISO
29042-8:2011
*
Safety of machinery — Evaluation of
the emission of airborne hazardous
substances — Part 8: Room method
for the measurement of the pollutant
concentration parameter
B
ISO
29042-9:2011
*
Safety of machinery — Evaluation of
the emission of airborne hazardous
substances — Part 9: Decontamination
index
D
J
TC 204
U
F
ISO
12623:2011
Intelligent transport systems
ISO
21216:2011
*
Intelligent transport systems — Wireless communications — CALM using
millimetre communications — Air
interface
F
ISO
24099:2011
*
Navigation data delivery structures and
protocols
U
Horology
*
J
ISO Update, Supplement to ISO Focus -- February 2011
ISO
29283:2011
*
TC 214
ISO
16653-3:2011
ITS CALM Mobile Wireless Broadband
applications using Communications in
accordance with IEEE 802.20
*
Mobile elevating work platforms — Design, calculations, safety requirements
and test methods relative to special
features — Part 3: MEWPs for orchard
operations
Cosmetics
ISO
24444:2010
Cosmetics — Sun protection test
methods — In vivo determination of
the sun protection factor (SPF)
TC 235
Project Committee: Rating
services
*
Rating services — Assessment of
creditworthiness of non-listed entities
C
*
Information technology — Radio
frequency identification device conformance test methods — Part 6: Test
methods for air interface communications at 860 MHz to 960 MHz
V
ISO/IEC
29143:2011
*
Information technology — Automatic
identification and data capture techniques — Air interface specification for
Mobile RFID interrogators
S
ISO/IEC
19788-1:2011
*
Information technology — Learning, education and training — Metadata for learning resources — Part 1:
Framework
U
ISO/IEC
19794-8:2006/
Cor 1:2011
*
Information technology — Biometric
data interchange formats — Part 8:
Finger pattern skeletal data — Technical Corrigendum 1
ISO/IEC
19795-7:2011
*
Information technology — Biometric
performance testing and reporting —
Part 7: Testing of on-card biometric
comparison algorithms
M
ISO/IEC
24709-3:2011
*
Information technology — Conformance testing for the biometric application programming interface (BioAPI)
— Part 3: Test assertions for BioAPI
frameworks
XD
S
E
IULTCS
International Union of Leather
Technologists and Chemists
Societies
ISO
13365:2011
Leather — Chemical tests — Determination of the preservative (TCMTB,
PCMC, OPP, OIT) content in leather by
liquid chromatography
C
ISO
17072-1:2011
Leather — Chemical determination of
metal content — Part 1: Extractable
metals
D
ISO
17072-2:2011
Leather — Chemical determination of
metal content — Part 2: Total metal
content
D
CASCO
Committee on conformity
assessment
ISO/IEC
17021:2011
Conformity assessment — Requirements for bodies providing audit and
certification of management systems
JTC 1
free
Standards confirmed
S
The following International Standards are confimred for a five year
period:
Information technology
ISO/IEC ISP
29110-2:2011
*
Software engineering — Lifecycle
profiles for Very Small Entities (VSEs)
— Part 2: Framework and taxonomy
K
ISO/IEC ISP
29110-41:2011
*
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) —
Part 4-1: Profile specifications: Generic
profile group
U
Identification cards — Integrated circuit
cards — Part 1: Cards with contacts —
Physical characteristics
B
ISO/IEC
7816-1:2011
ISO/IEC TR
18047-6:2011
Elevating work platforms
TC 217
ISO/TS
10674:2011
D
*
ISO/IEC
10373-6:2011
*
Identification cards — Test methods —
Part 6: Proximity cards
XD
ISO/IEC
1449627:2009/Amd
2:2011
*
Information technology — Coding of
audio-visual objects — Part 27: 3D
Graphics conformance — Amendment
2: Scalable complexity 3D mesh coding conformance
XZ
ISO/IEC
15444-1:2004/
Amd 3:2010
*
Information technology — JPEG 2000
image coding system: Core coding
system — Part 1: — Amendment 3:
Profiles for broadcast applications
XZ
ISO/IEC
23000-5:2011
*
ISO/IEC
23006-3:2011
*
ISO/IEC
16022:2006/
Cor 2:2011
*
TC 5
Ferrous metal pipes and metallic
fittings
ISO 7-2:2000
(reconfirmed)
TC 8
Ships and marine technology
ISO 3904:1990
(reconfirmed)
ISO 5480:1979
(reconfirmed)
ISO 6345:1990
(reconfirmed)
ISO 15401:2000
(reconfirmed)
ISO 15402:2000
(reconfirmed)
TC 10
Technical product documentation
ISO 2594:1972
(reconfirmed)
ISO 4067-2:1980
(reconfirmed)
ISO 7437:1990
(reconfirmed)
ISO 9431:1990
(reconfirmed)
TC 17
Steel
ISO 4960:2007
Information technology — Multimedia
application format (MPEG-A) — Part 5:
Media streaming application format
X
Information technology — MPEG
extensible middleware (MXM) — Part
3: MXM reference software
G
Information technology — Automatic identification and data capture
techniques — Data Matrix bar code
symbology specification — Technical
Corrigendum 2
free
ISO 5954:2007
TC 22
TC 33
Refractories
ISO 1893:2007
ISO 10080:1990
(reconfirmed)
TC 34
Food products
ISO 10632:2000
(reconfirmed)
ISO 17059:2007
ISO 1956-2:1989
ISO Update, Supplement to ISO Focus -- February 2011
Road vehicles
ISO 8349:2002
(reconfirmed)
15
ISO 3631:1978
(reconfirmed)
ISO 11195:1995
ISO 3659:1977
(reconfirmed)
ISO 8836:2007
ISO 3959:1977
(reconfirmed)
ISO 7396-2:2007
ISO 6477:1988
(reconfirmed)
TC 145
ISO 6661:1983
(reconfirmed)
ISO 6662:1983
(reconfirmed)
ISO/TR
10488:1991
ISO 6664:1983
(reconfirmed)
ISO 80416-4:2005
ISO 6665:1983
(reconfirmed)
TC 147
ISO 6822:1984
(reconfirmed)
ISO 10304-1:2007
ISO 6949:1988
(reconfirmed)
ISO 11885:2007
ISO 7558:1988
(reconfirmed)
ISO 8689-2:2000
(reconfirmed)
(reconfirmed)
ISO 10634:1995
(reconfirmed)
ISO 7701:1994
(reconfirmed)
ISO 10706:2000
(reconfirmed)
ISO 7920:1984
(reconfirmed)
ISO 10712:1995
(reconfirmed)
ISO 8683:1988
(reconfirmed)
ISO 13829:2000
(reconfirmed)
ISO 9376:1988
(reconfirmed)
TC 204
Intelligent transport systems
ISO 6667:1985
(reconfirmed)
ISO 24535:2007
ISO 6669:1995
(reconfirmed)
TC 206
ISO 11292:1995
(reconfirmed)
ISO 23145-1:2007
ISO 11294:1994
(reconfirmed)
TC 213
Dimensional and geometrical product
specifications and verification
ISO 10360-3:2000
(reconfirmed)
Cosmetics
ISO 7561:1984
TC 39
Machine tools
ISO 3371:1975
(reconfirmed)
ISO 8526-1:1990
(reconfirmed)
TC 217
ISO 8526-2:1990
(reconfirmed)
ISO 18415:2007
TC 46
Information and documentation
ISO 18416:2007
TC 48
Laboratory equipment
ISO 641:1975
(reconfirmed)
ISO/IEC
17021:2006
ISO 695:1991
(reconfirmed)
ISO 719:1985
(reconfirmed)
ISO 4796-2:2000
(reconfirmed)
ISO 4796-3:2000
(reconfirmed)
TC 54
Essential oils
ISO 3527:2000
(reconfirmed)
ISO 8432:1987
(reconfirmed)
ISO 3297:2007
ISO 17382:2007
TC 58
Gas cylinders
CASCO
(reconfirmed)
Graphical symbols
Water quality
Fine ceramics
Committee on conformity assessment
Standards withdrawn
Period from 01 January to 31 January 2011
TC 43
Acoustics
ISO 10302:1996
(replaced by ISO 10302-1:2011)
TC 118
Compressors and pneumatic tools,
machines and equipment
ISO 8662-14:1996
(replaced by ISO 28927-9:2009, ISO
28927-11:2011)
TC 194
Biological evaluation of medical
devices
ISO 9803-1:2007
ISO 14155-1:2003
(replaced by ISO 14155:2011)
ISO 9803-2:2007
ISO 14155-2:2003
(replaced by ISO 14155:2011)
ISO 21358:2007
JTC 1
Information technology
ISO/IEC
7816-1:1998
(replaced by ISO/IEC 7816-1:2011)
ISO/IEC 78161:1998/Amd
1:2003
(replaced by ISO/IEC 7816-1:2011)
ISO/IEC
10373-6:2001
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 103736:2001/Amd
1:2007
(replaced by ISO/IEC 10373-6:2011)
ISO 11625:2007
TC 72
Textile machinery and accessories
ISO 9904:2000
(reconfirmed)
TC 94
Personal safety -- Protective clothing
and equipment
ISO 20346:2004
TC 112
Vacuum technology
ISO 21360:2007
TC 119
Powder metallurgy
ISO 3954:2007
ISO 4491-1:1989
(reconfirmed)
TC 121
Anaesthetic and respiratory equipment
ISO 5358:1992
(reconfirmed)
ISO 8835-2:2007
ISO 8835-3:2007
16
ISO Update, Supplement to ISO Focus -- February 2011
ISO/IEC 103736:2001/Amd
2:2003
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 103736:2001/Amd
3:2006
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 103736:2001/Amd
4:2006
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 103736:2001/Amd
5:2007
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC
23000-5:2008
(replaced by ISO/IEC 23000-5:2011)
ISO/IEC TR
18047-6:2008
(replaced by ISO/IEC TR 18047-6:2011)
Meeting calendar
(update at 01 January 2011)
February-March 2011
28-1
Oostenede
(Belgium)
TC 23/SC 4
Tractors and machinery for agriculture and
forestry/Tractors
28-4
Melbourne
(Australia)
TC 251
Project committee:
Asset management
JTC 2
Joint Project Committee - Energy efficiency
and renewable energy
sources - Common
terminology
March 2011
1-3
Atlanta (USA)
*
2
Bangkok
(Thailand)
TC 122
Packaging
3
Frankfurt
(Germany)
TC 131/SC 6
Fluid power systems/
Contamination control
3-4
Berlin (Germany)
TC 58/SC 4
Gas cylinders/Operational requirements
for gas cylinders
7-8
Berlin (Germany)
TC 1
Screw threads
7-9
Sydney
(Australia)
TC 243
Project Committee:
Consumer product
safety
7-11
Sydney
(Australia)
TC 240
Project Committee:
Product recall
11
Paris (France)
TC 22/SC 21
Road vehicles/Electrically propelled road
vehicles
*
* Information definite but meeting not yet formally convened
** Provisional
12-18 Strasbourg
(France)
*
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
15-16 Geneva
(Switzerland)
**
COUNCIL
Council
17-18 Geneva
(Switzerland)
*
COUNCIL
Council
18-19 Tokyo (Japan)
TC 219
Floor coverings
24
Milan (Italy)
TC 118/SC 3
Compressors and
pneumatic tools,
machines and equipment/Pneumatic tools
and machines
24
Milan (Italy)
TC 118/SC 4
Compressors and
pneumatic tools,
machines and equipment/Compressed air
purity specification
and compressed air
treatment equipment
24
Milan (Italy)
TC 118/SC 6
Compressors and
pneumatic tools,
machines and equipment/Air compressors
and compressed air
systems
25
Milan (Italy)
TC 118
Compressors and
pneumatic tools, machines and equipment
28
Tokyo (Japan)
TC 59/SC 3
Buildings and civil
engineering works/
Functional/user
requirements and
performance in building construction
29
Berlin (Germany)
February 2011
7-8
7-11
9
Milan (Italy)
TC 44/SC 8
Melbourne
(Australia)
TC 121/SC 2
Paris (France)
TC 213
16-17 Stockholm
(Sweden)
17
Hamburg
(Germany)
18
McLean, Virginia
(USA)
21-25 Seattle (USA)
**
**
Welding and allied
processes/Equipment for gas welding,
cutting and allied
processes
Anaesthetic and respiratory equipment/
Airways and related
equipment
Dimensional and
geometrical product
specifications and
verification
TC 17/SC 20
Steel/General technical delivery conditions, sampling and
mechanical testing
methods
TC 8/SC 8
Ships and marine
technology/Ship
design
TC 154
Processes, data
elements and
documents in commerce, industry and
administration
JTC 1/SC 35
Information technology/User interfaces
21-25 Osaka (Japan)
TC 107
Metallic and other
inorganic coatings
23
TC 23/SC 2
Tractors and machinery for agriculture and
forestry/Common
tests
Paris (France)
23-24 Geneva
(Switzerland)
*
TMB
Technical Management Board
ISO Update, Supplement to ISO Focus -- February 2011
TC 117
Fans
30-31 Milan (Italy)
TC 17/SC 17
Steel/Steel wire rod
and wire products
30-31 Berlin (Germany)
TC 22/SC 1
Road vehicles/Ignition
equipment
17
April 2011
1
Prague (Czech
Republic)
JTC 1/SC 34
Information technology/Document
description and processing languages
2-3
Oostenede
(Belgium)
TC 23/SC 3
Tractors and machinery for agriculture and
forestry/Safety and
comfort
3-4
Oostenede
(Belgium)
TC 23
Tractors and machinery for agriculture and
forestry
3-8
Berlin (Germany)
TC 127
Earth-moving
machinery
4
Urbach
(Germany)
TC 161
Control and protective devices for gas
and/or oil burners and
appliances
4-5
Madrid (Spain)
TC 34/SC 11
Food products/
Animal and vegetable
fats and oils
5-6
Bangalore (India)
6
*
TC 67/SC 6
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Processing equipment and systems
26-29 Niagara Falls
(Canada)
TC 85/SC 2
Nuclear energy,
nuclear technologies,
and radiological protection/Radiological
protection
May 2011
2-3
Paris (France)
TC 155
Nickel and nickel
alloys
2-4
Delft
(Netherlands)
TC 249
Traditional chinese
medicine
2-6
Sydney
(Australia)
TC 46
Information and
documentation
3-4
Paris (France)
TC 44/SC 3
Welding and allied
processes/Welding
consumables
4-5
Geneva
(Switzerland)
TC 94
Personal safety -Protective clothing
and equipment
6-13
Geneva
(Switzerland)
TC 94/SC 14
Personal safety -Protective clothing
and equipment/Firefighters' personal
equipment
7-10
(Netherlands)
TC 68/SC 4
Financial services/
Securities and related
financial instruments
9
Berlin (Germany)
TC 110/SC 1
Industrial trucks/General terminology
9-13
Berlin (Germany)
TC 114
Horology
9-13
Adelaide
(Australia)
TC 241
Project Committee:
Road-Traffic Safety
Management System
11
Berlin (Germany)
TC 110/SC 4
Industrial trucks/
Rough-terrain trucks
11
Porto de Galinhas (Brazil)
TC 135/SC 9
Non-destructive testing/Acoustic emission
testing
TC 34/SC 15
Food products/Coffee
Madrid (Spain)
TC 34/SC 2
Food products/Oleaginous seeds and
fruits and oilseed
meals
6
Bratislava
(Slovakia)
TC 226
Materials for the
production of primary
aluminium
7
London (United
Kingdom)
TC 43/SC 2
Acoustics/Building
acoustics
7
Paris (France)
TC 92/SC 1
Fire safety/Fire initiation and growth
7
La Plaine StDenis (France)
TC 92/SC 2
Fire safety/Fire
containment
7
Paris (France)
TC 92/SC 3
Fire safety/Fire
threat to people and
environment
7-8
London (United
Kingdom)
TC 43/SC 1
Acoustics/Noise
8
London (United
Kingdom)
TC 43
Acoustics
8
Paris (France)
TC 92
Fire safety
8
La Plaine StDenis (France)
TC 92/SC 4
Fire safety/Fire safety
engineering
12
TC 68
Financial services
8
Delft
(Netherlands)
TC 153/SC 1
Valves/Design, manufacture, marking and
testing
Delft
(Netherlands)
12
Berlin (Germany)
TC 110/SC 2
TC 59/SC 14
Buildings and civil
engineering works/
Design life
Industrial trucks/
Safety of powered
industrial trucks
12-13 Florida (USA)
TC 184/SC 5
TC 210
Quality management
and corresponding
general aspects for
medical devices
Automation systems
and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
TC 130
Graphic technology
TC 253
13-14 Dresden
(Germany)
TC 199
Safety of machinery
Project committee:
Treated wastewater
re-use for irrigation
14
Milan (Italy)
TC 8/SC 12
Ships and marine
technology/Ships and
marine technology Large yachts
13
Franklin Lakes
(USA)
TC 84
Devices for administration of medicinal
products and intravascular catheters
15
Porto (Portugal)
TC 23/SC 7
Tractors and machinery for agriculture and
forestry/Equipment
for harvesting and
conservation
13
Berlin (Germany)
TC 110
Industrial trucks
13
Beijing (China)
TC 195
Building construction machinery and
equipment
15
Zurich
(Switzerland)
TC 39/SC 2
Machine tools/Test
conditions for metal
cutting machine tools
10-12 Porto (Portugal)
**
20-21 Astana
(Kazakhstan)
*
11-12 Tokyo (Japan)
11-16 Berlin (Germany)
19-20 Berlin (Germany)
18
**
TC 22/SC 1
Road vehicles/Ignition
equipment
12-13 Vienna (Austria)
**
*
*
*
**
ISO Update, Supplement to ISO Focus -- February 2011
16-17 Bratislava
(Slovakia)
*
TC 44/SC 11
Welding and allied
processes/Qualification requirements for
welding and allied
processes personnel
16-18 Frankfurt
(Germany)
*
TC 214
Elevating work
platforms
TC 22/SC 13
Road vehicles/Ergonomics applicable to
road vehicles
16-19 Kobe (Japan)
16-19 Stockholm
(Sweden)
16-20 Kona, Hawaii
(USA)
TC 156
JTC 1/SC 32
Information technology/Data management
and interchange
16-20 Beijing (China)
TC 247
Fraud countermeasures and controls
16-20 Berlin (Germany)
TC 248
Project committee:
Sustainability criteria
for bioenergy
TC 224
Service activities
relating to drinking
water supply systems
and wastewater
systems - Quality
criteria of the service
and performance
indicators
16-22 Vienna (Austria)
18-19 Bratislava
(Slovakia)
*
Corrosion of metals
and alloys
*
**
18-19 Pau (France)
20
Rome (Italy)
20
St. Petersburg (Russian
Federation)
TC 44/SC 10
TC 67/SC 2
*
Welding and allied
processes/Unification
of requirements in the
field of metal welding
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Pipeline transportation systems
TC 228
Tourism and related
services
TC 229
Nanotechnologies
22-27 Portland, Oregon
(USA)
*
TC 184/SC 4
Automation systems
and integration/Industrial data
23-24 Stavanger
(Norway)
**
TC 67/SC 4
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Drilling and production equipment
23-27 La Plaine StDenis (France)
*
TC 6
Paper, board and
pulps
23-27 Chicago (USA)
**
TC 23/SC 6
Tractors and machinery for agriculture and
forestry/Equipment
for crop protection
23-27 Salt Lake City
(USA)
TC 171
Document management applications
23-27 Kuopio (Finland)
*
TC 215
Health informatics
23-28 Jeju (Korea,
Republic of)
*
TC 147
Water quality
TC 29/SC 2
Small tools/High
speed steel cutting tools and their
attachments
24
Stockholm
(Sweden)
ISO Update, Supplement to ISO Focus -- February 2011
24-26 St. Petersburg (Russian
Federation)
25
Milan (Italy)
*
TC 67/SC 5
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Casing, tubing and
drill pipe
TC 136
Furniture
25-27 Salt Lake City
(USA)
TC 171/SC 1
Document management applications/
Quality
26
TC 29/SC 9
Small tools/Tools
with cutting edges
made of hard cutting
materials
26-27 Delft
(Netherlands)
TC 211
Geographic information/
Geomatics
27
Stockholm
(Sweden)
TC 29
Small tools
31
Pretoria (South
Africa)
TC 96/SC 7
Cranes/Tower cranes
TC 96
Cranes
TC 85/SC 5
Nuclear energy,
nuclear technologies, and radiological
protection/Nuclear
fuel cycle
Stockholm
(Sweden)
*
May-June 2011
30-4
Pretoria (South
Africa)
31-2
London (United
Kingdom)
31-1
Pretoria (South
Africa)
TC 96/SC 6
Cranes/Mobile cranes
31-1
Beijing (China)
TC 257
Energy savings
TC 96/SC 4
Cranes/Test methods
TC 96/SC 8
Cranes/Jib cranes
*
June 2011
1
Pretoria (South
Africa)
*
1
Pretoria (South
Africa)
2
Pretoria (South
Africa)
*
TC 96/SC 5
Cranes/Use, operation and maintenance
2-3
Pretoria (South
Africa)
*
TC 96/SC 10
Cranes/Design principles and requirements
3
Pretoria (South
Africa)
TC 96/SC 3
Cranes/Selection of
wire ropes
3
Pretoria (South
Africa)
*
TC 96/SC 9
Cranes/Bridge and
gantry cranes
4
Pretoria (South
Africa)
*
TC 96/SC 2
Cranes/Terminology
6-9
Vienna (Austria)
**
TC 145
Graphical symbols
6-10
Rochester (USA)
TC 42
Photography
8
Cannes (France)
*
TC 35/SC 12
Paints and varnishes/
Preparation of steel
substrates before application of paints and
related products
8
Cannes (France)
*
TC 35/SC 14
Paints and varnishes/
Protective paint
systems for steel
structures
9
Cannes (France)
*
TC 35/SC 9
Paints and varnishes/
General test methods for paints and
varnishes
9-10
Vienna (Austria)
*
TC 91
Surface active agents
10
Cannes (France)
**
TC 35
Paints and varnishes
10
Vancouver
(Canada)
**
TC 192
Gas turbines
19
Terminology and
other language and
content resources
July 2011
11-15 Delft
(Netherlands)
*
REMCO
Committee on reference materials
TC 4
Rolling bearings
24
*
JTC 1/SC 29
TC 69
Applications of statistical methods
13-17 Vancouver
(Canada)
TC 121
Anaesthetic and respiratory equipment
Information technology/Coding of audio,
picture, multimedia
and hypermedia
information
13-17 Vancouver
(Canada)
TC 121/SC 3
Anaesthetic and respiratory equipment/
Lung ventilators and
related equipment
**
JTC 1/SC 35
Information technology/User interfaces
**
TC 163
Thermal performance
and energy use in the
built environment
12-14 Chicago (USA)
*
TC 205
Building environment
design
12-16 Vienna (Austria)
*
TC 108/SC 4
Mechanical vibration,
shock and condition
monitoring/Human
exposure to mechanical vibration and
shock
12-16 Florianopolis
(Brazil)
**
TC 150
Implants for surgery
12-16 Florianopolis
(Brazil)
*
TC 150/SC 1
Implants for surgery/
Materials
12-16 Adelaide
(Australia)
*
TC 190
Soil quality
12-16 Rotorua (New
Zealand)
*
TC 218
Timber
12-17 Seoul (Korea,
Republic of)
**
13-17 Brussels
(Belgium)
*
13-17 Tokyo (Japan)
*
TC 37
13-17 Vancouver
(Canada)
**
TC 121/SC 6
Anaesthetic and respiratory equipment/
Medical gas systems
14-15 Geneva
(Switzerland)
*
TMB
Technical Management Board
15
*
TC 29/SC 5
Small tools/Grinding
wheels and abrasives
15-17 Kobe (Japan)
*
TC 8/SC 1
Ships and marine
technology/Lifesaving
and fire protection
20-24 (USA)
**
JTC 1/SC 6
Information technology/Telecommunications and information
exchange between
systems
Stockholm
(Sweden)
Turin (Italy)
August 2011
(Sweden)
September 2011
9-15
Chicago (USA)
20-24 Bournemouth (United
Kingdom)
*
TC 34/SC 9
Food products/
Microbiology
26-30 Hollywood,
Florida (USA)
*
TC 85/SC 6
Nuclear energy,
nuclear technologies, and radiological
protection/Reactor
technology
13-15 Moscow (Russian Federation)
*
TC 67
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries
29
*
TC 44/SC 6
Welding and allied
processes/Resistance
welding and allied
mechanical joining
15-17 Brescia (Italy)
**
TC 201
Surface chemical
analysis
TC 106
Dentistry
Berlin (Germany)
29-30 London (United
Kingdom)
San Francisco
(USA)
**
**
Hong Kong
(Hong Kong,
China)
**
(South Africa)
**
TC 29/SC 10
TC 67/SC 3
TC 71
Small tools/Assembly tools for screws
and nuts, pliers and
nippers
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Drilling and completion fluids, and well
cements
Concrete, reinforced
concrete and prestressed concrete
18-24 Phoenix (USA)
18-24 Paris (France)
*
TC 164
Mechanical testing of
metals
19
Chicago (USA)
*
TC 21/SC 3
Equipment for fire
protection and fire
fighting/Fire detection
and alarm systems
19
Chicago (USA)
*
TC 21/SC 11
Equipment for fire
protection and fire
fighting/Smoke and
heat control systems
and components
19-20 Paris (France)
*
TC 164/SC 3
Mechanical testing
of metals/Hardness
testing
19-20 New Delhi (India)
*
TMB
Technical Management Board
19-22 Paris (France)
*
TC 164/SC 4
Mechanical testing
of metals/Toughness
testing -- Fracture (F),
Pendulum (P), Tear (T)
TC 133
Sizing systems and
designations for
clothes
TC 94/SC 6
Personal safety -Protective clothing
and equipment/Eye
and face protection
19-23 Bali (Indonesia)
*
TC 165
Timber structures
19-23 Adelaide
(Australia)
*
TC 190/SC 1
Soil quality/Evaluation
of criteria, terminology and codification
June-July 2011
27-1
27-1
Berlin (Germany)
Paris (France)
**
TC 188
Small craft
19-23 Adelaide
(Australia)
*
TC 190/SC 3
Soil quality/Chemical methods and soil
characteristics
**
TC 204
Intelligent transport
systems
19-23 Adelaide
(Australia)
*
TC 190/SC 4
Soil quality/Biological
methods
2nd Quarter 2011
Prague (Czech
Republic)
20
ISO Update, Supplement to ISO Focus -- February 2011
19-23 Adelaide
(Australia)
*
TC 190/SC 7
Soil quality/Soil and
site assessment
20
**
TC 21/SC 6
Equipment for fire
protection and fire
fighting/Foam and
powder media and
fixed firefighting systems using foam and
powder
20
Chicago (USA)
Berlin (Germany)
*
TC 29/SC 8
Small tools/Tools
for pressing and
moulding
20-22 Paris (France)
*
TC 164/SC 5
Mechanical testing of
metals/Fatigue testing
20-23 Washington, D.C
(USA)
**
TC 172/SC 5
Optics and photonics/Microscopes and
endoscopes
21
*
TC 21/SC 2
Equipment for fire
protection and fire
fighting/Manually transportable fire
extinguishers
Chicago (USA)
3rd Quarter 2011
(United
Kingdom)
**
TC 41/SC 1
Pulleys and belts
(including veebelts)/
Friction
(United
Kingdom)
**
TC 41/SC 3
Pulleys and belts
(including veebelts)/
Conveyor belts
(United
Kingdom)
**
TC 41/SC 4
Pulleys and belts
(including veebelts)/
Synchronous belt
drives
Sapporo (Japan)
**
TC 184/SC 1
Automation systems
and integration/Physical device control
Mexico (Mexico)
**
TC 253
Project committee:
Treated wastewater
re-use for irrigation
October 2011
3-7
Sydney
(Australia)
*
TC 89
Wood-based panels
3-7
London (United
Kingdom)
*
TC 146/SC 2
Air quality/Workplace
atmospheres
21
Vienna (Austria)
*
TC 146/SC 6
Air quality/Indoor air
21
Paris (France)
*
TC 164/SC 2
Mechanical testing
of metals/Ductility
testing
6-7
Geneva
(Switzerland)
*
CASCO
Committee on conformity assessment
9-14
Beijing (China)
*
TC 27
Solid mineral fuels
Equipment for fire
protection and fire
fighting/Gaseous
media and firefighting
systems using gas
10-14 (Unknown)
**
TC 25
Cast irons and pig
irons
10-14 (Japan)
**
TC 34/SC 17
Food products/Management systems for
food safety
TC 159/SC 4
Ergonomics/Ergonomics of humansystem interaction
10-14 Nanjing (China)
**
TC 193/SC 1
Natural gas/Analysis
of natural gas
10-14 Milan (Italy)
*
TC 209
Cleanrooms and associated controlled
environments
16-21 Suzhou (China)
*
TC 184/SC 4
Automation systems
and integration/Industrial data
17-19 Tokyo (Japan)
*
TC 5/SC 2
Ferrous metal pipes
and metallic fittings/
Cast iron pipes, fittings and their joints
21-22 Chicago (USA)
*
22-23 Las Vegas (USA)
TC 21/SC 8
22-23 Paris (France)
*
TC 164/SC 1
Mechanical testing
of metals/Uniaxial
testing
23
Chicago (USA)
*
TC 21
Equipment for fire
protection and fire
fighting
23
Sao Paulo
(Brazil)
*
TC 142
Cleaning equipment
for air and other
gases
24
New Delhi (India)
*
COUNCIL
Council
TC 45/SC 2
*
TAG 8
Building
17-20 Yokohama
(Japan)
*
26-27 Geneva
(Switzerland)
Rubber and rubber
products/Testing and
analysis
29-30 (Unknown)
**
TC 44
Welding and allied
processes
17-21 Yokohama
(Japan)
*
TC 45
Rubber and rubber
products
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
18-20 London (United
Kingdom)
*
TC 202
Microbeam analysis
21
*
TC 244
Industrial furnaces
and associated
thermal processing
equipment
TC 38
Textiles
Shanghai (China)
Edinburgh (United Kingdom)
**
TC 24/SC 4
Particle characterization including sieving/Particle
characterization
(Unknown)
**
TC 44/SC 9
Welding and allied
processes/Health and
safety
(France)
**
TC 59/SC 8
Buildings and civil
engineering works/
Sealants
(Malaysia)
**
TC 61/SC 4
Plastics/Burning
behaviour
Beijing (China)
**
TC 213
Dimensional and
geometrical product
specifications and
verification
ISO Update, Supplement to ISO Focus -- February 2011
Courbevoie,
Paris (France)
24-28 Tokyo (Japan)
24-28 Moscow (Russian Federation)
**
TC 178
Lifts, escalators and
moving walks
25-27 Beltsville, Maryland (USA)
*
TC 34/SC 16
Food products/Horizontal methods for
molecular biomarker
analysis
25-28 Amsterdam
(Netherlands)
**
TC 138/SC 1
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for soil, waste
and drainage (including land drainage)
21
26
27
Amsterdam
(Netherlands)
Amsterdam
(Netherlands)
**
**
TC 138/SC 4
TC 138/SC 3
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for the supply
of gaseous fuels
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for industrial
applications
*
TC 123/SC 6
Plain bearings/Terms
and common items
2-4
Bangkok
(Thailand)
*
TC 123/SC 7
Plain bearings/Special types of plain
bearings
4
Cincinnati (USA)
*
TC 60
Gears
4
(Malaysia)
**
TC 238
Solid biofuels
7-11
Osaka (Japan)
**
TC 94/SC 13
Personal safety -Protective clothing
and equipment/Protective clothing
7-12
(USA)
*
JTC 1
Information
technology
Annapolis (USA)
*
TC 70/SC 7
Internal combustion
engines/Tests for
lubricating oil filters
10-11 Venice (Italy)
*
TC 227
Springs
**
JTC 1/SC 17
Information technology/Cards and personal identification
London (United
Kingdom)
**
TC 59/SC 15
Buildings and civil
engineering works/
Performance criteria
for single family attached and detached
dwellings
10
14-16 Nagoya (Japan)
**
TC 189
Ceramic tile
Round steel link
chains, chain slings,
components and
accessories
14-18 (South Africa)
**
TC 229
Nanotechnologies
21-22 Berlin (Germany)
*
TC 44/SC 8
Welding and allied
processes/Equipment for gas welding,
cutting and allied
processes
21-25 Stellenbosch
(South Africa)
**
TC 98
Bases for design of
structures
(Unknown)
**
TC 34/SC 7
Food products/Spices, culinary herbs and
condiments
(Japan)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and
physical tests for
textile fabrics
Pau (France)
**
TC 67/SC 3
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Drilling and completion fluids, and well
cements
(China)
(China)
**
**
**
TC 111
TC 111/SC 1
TC 111/SC 3
Round steel link
chains, chain slings,
components and accessories/Chains and
chain slings
Round steel link
chains, chain
slings, components
and accessories/
Components and
accessories
(Netherlands)
**
TC 138
Plastics pipes, fittings
and valves for the
transport of fluids
Amsterdam
(Netherlands)
**
TC 138/SC 5
Plastics pipes, fittings
and valves for the
transport of fluids/
General properties
of pipes, fittings
and valves of plastic
materials and their
accessories -- Test
methods and basic
specifications
Vienna (Austria)
**
TC 146/SC 1
Air quality/Stationary
source emissions
(France)
**
TC 206
Fine ceramics
October-November 2011
London (United
Kingdom)
November-December 2011
26-1
**
TC 46/SC 11
Information and documentation/Archives/
records management
2-4
Bangkok
(Thailand)
*
TC 123
Plain bearings
2-4
Bangkok
(Thailand)
*
TC 123/SC 2
Plain bearings/Materials and lubricants,
their properties,
characteristics, test
methods and testing
conditions
2-4
Bangkok
(Thailand)
*
TC 123/SC 3
Plain bearings/Dimensions, tolerances and
construction details
2-4
Bangkok
(Thailand)
*
TC 123/SC 5
Plain bearings/
Quality analysis and
assurance
(Israel)
**
TC 23/SC 18
Tractors and machinery for agriculture and
forestry/Irrigation and
drainage equipment
and systems
*
TC 108/SC 5
Mechanical vibration,
shock and condition
monitoring/Condition
monitoring and diagnostics of machines
(USA)
**
TC 30/SC 7
Measurement of
fluid flow in closed
conduits/Volume
methods including
water meters
(Japan)
**
TC 172/SC 3
Optics and photonics/Optical materials
and components
(South Africa)
**
TC 211
Geographic information/
Geomatics
**
TC 130
Graphic technology
December 2011
5-9
November 2011
22
Bangkok
(Thailand)
(Korea, Republic of)
(China)
31-3
2-4
Sydney
(Australia)
4th Quarter 2011
2nd Semester 2011
Tokyo (Japan)
ISO Update, Supplement to ISO Focus -- February 2011
Month unknown 2011
Calgary (Canada)
(North America)
**
JTC 1/SC 24
Information technology/Computer graphics, image processing
and environmental
data representation
Kyoto (Japan)
**
TC 33
Refractories
January 2012
Charlotte (USA)
**
TC 213
Dimensional and
geometrical product
specifications and
verification
*
TMB
Technical Management Board
(Korea, Republic of)
**
JTC 1/SC 35
Information technology/User interfaces
Florida (USA)
**
TC 115
Pumps
(USA)
**
TC 184/SC 2
Automation systems
and integration/
Robots and robotic
devices
**
TC 34/SC 12
Food products/Sensory analysis
(Unknown)
**
TC 23/SC 19
Tractors and machinery for agriculture and
forestry/Agricultural
electronics
(China)
**
JTC 1/SC 6
Information technology/Telecommunications and information
exchange between
systems
February-March 2012
25-5
Toulouse
(France)
March 2012
29
(Australia)
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
(Korea, Republic of)
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
(Italy)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics
and instruments
April 2012
Bern
(Switzerland)
**
TC 113
Hydrometry
Durban (South
Africa)
**
TC 135
Non-destructive
testing
Durban (South
Africa)
**
TC 135/SC 3
Non-destructive testing/Ultrasonic testing
Durban (South
Africa)
**
TC 135/SC 5
Non-destructive
testing/Radiation
methods
May 2012
7-11
Berlin (Germany)
**
TC 46
Information and
documentation
10
Chicago (USA)
**
TC 68
Financial services
(Unknown)
**
TC 126
Tobacco and tobacco
products
*
TMB
Technical Management Board
June 2012
13-14 Geneva
(Switzerland)
TC 67/SC 3
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Drilling and completion fluids, and well
cements
**
TC 211
Geographic information/
Geomatics
**
TC 142
Cleaning equipment
for air and other
gases
19-21 San Diego (USA)
**
GA
General Assembly
22
**
COUNCIL
Council
2nd Quarter 2012
February 2012
22-23 Geneva
(Switzerland)
**
ISO Update, Supplement to ISO Focus -- February 2011
(France)
September 2012
3-8
Zurich
(Switzerland)
San Diego (USA)
Zibo city (China)
**
TC 206
Fine ceramics
Cadiz (Spain)
**
TC 213
Dimensional and
geometrical product
specifications and
verification
**
TC 138/SC 4
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for the supply
of gaseous fuels
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
**
TC 211
Geographic information/
Geomatics
(Europe)
**
JTC 1/SC 24
Information technology/Computer graphics, image processing
and environmental
data representation
Vienna (Austria)
**
REMCO
Committee on reference materials
Delft
(Netherlands)
**
TC 23/SC 6
Tractors and machinery for agriculture and
forestry/Equipment
for crop protection
October 2012
24
Sydney
(Australia)
November 2012
Tokyo (Japan)
4th Quarter 2012
(Saudi Arabia)
Month unknown 2012
(Unknown)
**
TC 34
Food products
Chicago (USA)
**
TC 68/SC 4
Financial services/
Securities and related
financial instruments
(South Africa)
**
TC 102
Iron ore and direct
reduced iron
Berlin (Germany)
**
TC 107
Metallic and other
inorganic coatings
Sydney
(Australia)
**
TC 138
Plastics pipes, fittings
and valves for the
transport of fluids
Sydney
(Australia)
**
TC 138/SC 1
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for soil, waste
and drainage (including land drainage)
23