RIGID INDUSTRIES LED LIGHTING
Introduction
ARB has always focused on delivering products of the highest quality, reliability and practicality above all else. In
order to further service our customers, ARB Off Road Limited is proud to announce that it is now the official distributor of the world’s leading LED Lighting accessories from Rigid Industries.
Rigid Industries has developed its strong reputation for designing leading edge LED lighting with patented optics
and cutting edge technology, and as a result Rigid Industries remains the frontrunner in extreme light output, durability and maximum efficiency.
Rigid Industries LED Lighting ||
www.arb.co.th
1
Why rigid ?
Cutting Edge Technology - Rigid Industries has revolutionised the lighting world with their combination of LED
technology and cutting edge electronics, extremely durable housings, and highly efficient, patented optic systems.
All Rigid Industries LED lighting components feature:
•
•
•
•
•
•
•
•
•
•
Vibration Tested (MIL-STD-810G).
Corrosion Tested (ASTM B1117).
Submersion Tested (IP-68).
Dust Tested (IP-68).
Variable Voltage Range 9-36 VDC.
Over / Under Voltage Protection.
Full Range of Accessories & Mounting Options.
Unbreakable Polycarbonate Lens.
GORE Pressure Equalizing Vent.
Limited Lifetime Warranty
Get More for Less - Increase your light output and decrease your power consumption. Light is measured in Lumens per watt - the amount of light produced for every watt of electricity used. Rigid Industries LED Lights produce very high light output and require very little power to run them. This eliminates the need for additional power
and reduces the drain on your battery compared to tradition lighting.
50,000+ Hour LED Lifespan - LED’s are solid state devices with no moving parts. This means they are able to
withstand shock and vibration better than traditional Halogen, HID, and Xenon lights. Rigid Industries LED Lights
have a lifespan of more than 50,000 hours, compared to Halogen and Xenon lights which typically last up to
1,000 and 5,000 hours respectively. In any environment, Rigid Industries LED’s are the logical choice.
Built to Last - Rigid Industries LED Lights are manufactured to withstand the harshest environments that Mother
Nature can dish out. Our LED lights are made with only the highest grade materials available. Rigid Industries’
manufacturing process ensures LED Lights that are resistant to water penetration, shock and vibration. Touch
them once, then sit back and admire the performance for the life of your boat. Everything should be this simple
and enjoyable.
Clear & Consistent - As traditional light bulbs age, their colour, consistency, and brightness diminish. New replacement bulbs will look noticeably different compared to the remaining bulbs. Customized LED binning ensures
only the highest consistency of LED colour and brightness for our LED products. Rigid Industries LED Lights start
up quickly and efficiently with little battery draw. HID and Xenon technologies quickly drain huge amounts of current at start up in order to power the bulbs.
Rigid Industries LED Lighting
||
www.arb.co.th
2
Optics
The patented Hybrid™, Specter™, and Hyperspot™ optics capture the maximum amount of light rays emitted
from the LED and direct it in the forward projecting formulas that outshine the competition.
hybrid
•
•
•
•
•
•
Spot or Flood configuration.
Combination of lens and reflector.
93%+ efficiency.
Distance (10º Spot).
Broad beam (25º Flood).
Great for all around distance.
SPECTER
•
•
•
•
•
•
Wide or Driving configuration.
45° spread horizontal.
No internal reflector.
Minimal waste of light.
Allows more LED’s in same housing.
Widest of all patterns.
HYPERSPOT
•
5º ultra-narrow concentrated spot beam
pattern for long distance applications.
•
Patent pending aperture system blocks
unused light for a clean beam.
•
Highest intensity per watt or square inch
on the market.
•
Maximum distance.
Rigid Industries LED Lighting
||
www.arb.co.th
3
DIFUSSION LENS
Rigid Industries’ Diffusion lens offers the ultimate
solution in area and scene lighting. Identifiable by
its textured appearance, our diffusion lens was
specifically engineered to project light at a 60°
flood pattern and is made from optically clear,
unbreakable polycarbonate plastic.
More information
For more information or details of the authorized dealer nearest you, please contact:
ARB Offroad Limited
Eastern Seaboard Industrial Estate 300/56 GW1 Building, Moo.1 T.Tasit, A.Pluakdaeng Rayong 21140
Tel: +66 (0) 38 929-672-5 Fax: +66 (0) 38 929-676
Information about ARB products can be downloaded on the website at www.arb.co.th or email us at
sales.thailand@arb.com.au
Keep up-to-date with ARB news on the Facebook page and follow us Instagram at
www.facebook.com/ARB4x4Thailand
arb4x4thailand
Rigid Industries LED Lighting
||
www.arb.co.th
4