NEW PRODUCT ANNOUNCEMENT LED Lightbar Plus 24V DC Lightbar Nora introduces one of the most powerful LED linear low profile light sources on the market. The LIghtbar Plus produces an incredible 425 plus lumens per foot while only consuming 8 watts. An average CRI of 84 makes the LIghtbar Plus the energy saving choice for architects, designers and lighting specifiers. Can be used in under cabinet, in cabinet, cove, display, and 425+ general commercial, retail and residential lighting applications. lumens/ft. 0.4" 0.53" 0.75" Clear Lens 0.53" 0.4" 0.75" Actual Size FEATURES 6-1/16" 11-3/4" 23-5/8" 35-5/8" 47-5/8" LED lightbar Plus ·· Over 425 Lumens/foot using an average of 8W/foot ·· Up to 86 CRI using Nichia® LEDs ·· Up to 10' runs with 100W driver, 8' with 60W driver and 3' with 30W driver. ·· Available in Cool White (4200K) and Warm White (3000K) ·· Diffuser lens available ·· Easy installation with adjustable aiming mounting brackets ·· Flush end connectors ·· Dimmable with Dimmable Power Supply ·· Lightbars and Class II Drivers rated for -20ºC operation CaTALOG. No. voltage NULB-506LED30 24V DC NULB-506LED42 24V DC NULB-512LED30 24V DC NULB-512LED42 24V DC NULB-524LED30 24V DC NULB-524LED42 24V DC NULB-536LED30 24V DC NULB-536LED42 24V DC NULB-548LED30 24V DC NULB-548LED42 24V DC A - Aluminum, BZ - Bronze Sample Order Number: NULB-12LED30A Lengthsource 6" 6" 12" 12" 24" 24" 36" 36" 48" 48" LED LED LED LED LED LED LED LED LED LED Color TemP. Finish 3000K 4200K 3000K 4200K 3000K 4200K 3000K 4200K 3000K 4200K Aluminum, Bronze Aluminum, Bronze Aluminum, Bronze Aluminum, Bronze Aluminum, Bronze Aluminum, Bronze Aluminum, Bronze Aluminum, Bronze Aluminum, Bronze Aluminum, Bronze ·· cULus Dry Label listed ·· 30,000 hours of rated lamp life committed to 2008 GREEN 0˚, 10˚ & 23˚ 45˚, 53˚ & 65˚ Illuminating the future…since 1989 TEL. 800.686.6672 | FAX 800.500.9955 | www.NORALIGHTING.com In-Line Motion Sensor NEW! LED SPECIALTY NAL-230 (A, BZ)24V DC 24V LED Lightbar Plus Accessories & Drivers End to End Connector NEW! NAL-200 Finish: Black Insulator Miniature interconnector for seamless end to end transitions. NAL-200 is included with every Lightbar. NAL-225 (BZ, C) Finish: Bronze, Chrome Can be used to provide rigidity when joining two bars together. Has mounting holes. NAL-255 (A, BZ)24V DC Includes: end to end connector, bar to bar joiner, flat mounting clip, adjustable mounting clip, and special power line interconnector* with in-line switch. *Requires included power line interconnect. Includes: end to end connector, bar to bar joiner, flat mounting clip, and special power line interconnector* with in-line switch. *Requires included power line interconnect. Diffuser Lens NAL-299/6 NAL-299/12 NAL-299/24 NAL-299/36 NAL-299/48 Mounting Clips NAL-201 (BZ, C) Flat 6" Lens 12" Lens 24" Lens 36" Lens 48" Lens Aiming Degree: 0˚, 10˚, 23˚ NAL-245 (BZ, C) Angled Aiming Degree: 45˚, 53˚, 65˚ Two clips included with every Lightbar (three with 36" and 48" units). Diffuses light and softens image. Simply adhers to lens of Lightbar. Bar to Bar Joiner NEW! In-Line Dimmer NEW! NEW! Adjustable Mounting Clip Interconnection Cables NAL-280 (BZ, C) NAL-202 NAL-206 NAL-218 NAL-238 NAL-258 Aiming Degree: 180˚ Easy flexible aiming. Extends 1" with bar installed at 90˚ 2" Cable 6" Cable 18" Cable 38" Cable 58" Cable Easy linking of two Lightbars in any direction. Power Line Interconnector NAL-208 20" Cable NAL-208/72 72" Cable NAL-212 12" w/ Switch NAL-212 90˚ Power Line Interconnector Mini Power Feed Splitter NAL-207 20" Cable NAL-207/72 72" Cable NAL-221 To connect Lightbar run directly to LED Driver Allows for easy installation in a limited space application. Connects Lightbar run directly to driver. Finish: Black Allows one driver to be split into 4 separate, simultaneous runs. Requires one interconnection cable for each Lightbar. 1-1/2" W x 0.8" L x 0.2" H Mini Coupler Dimmable Class II Remote Hardwire Magnetic Driver Dimmable Class II Remote Hardwire Magnetic Driver NAL-220 w/ Integral Regulator for Constant Current and Voltage NMT-60/24C2HP* 60W NMT-96/24C2HP* 96W Finish: Black Dim.: 3/8" W; 1/8" L; 3/16" D Extends interconnection cables and power line interconnectors. NMT-48/24C2D1* 48W NMT-96/24C2D1* 96W NMT-303/24C2D1*†3 x 100W Voltage: 24V DC Includes: 10' Power Line Connector (30' ordered separately) † Hardwired Class II El. Driver NATL-530HW* NATL-560HW* 30W 60W Voltage: 24V DC Cable Length: 3-1/4" Input Wire: 4" NOTE: Requires NUSP-JBox for hardwire or NRA-6035 for plug in application; Power line interconnection cable to connect to Lightbar run except when used with NAL-250 NEW! NEW! Voltage: 24V DC Includes: (3) 10' Power Line Connectors (30' ordered separately) Class II Electronic LED Driver Plug-In Electronic Driver NATL-5100HW* 100W Voltage: 24V DC Includes: hardwire box, 24V driver and 10' Power Line Connector. Non-Dimmable NATL-524* 24W 24V DC NATL-545* 45W 24V DC NATL-524 NATL-545 NATL-596 Voltage: 24V DC Cable Length: 6 Feet NATL-596* 96W 24V DC Voltage: 24V DC Input Wire: 5' Cord and Plug Output Wire: 44" Out Wire Low Voltage Splice Box Power Line Connector Flexible Power Cord NATL-415W NALTL-10 NALTL-30 NRA-6035W/6 6' Cable NRA-6035W/10 10' Cable Finish: White Use to join Romex® low voltage lead to low voltage power line connector or interconnector. Dimmer NAL-250 Can dim two separate runs simultaneously. Installs between Lightbar and Driver. Does not require power line interconnector. Modes: Dimming, AutoFading, and Flashing Includes: (2) 6” Interconnection Cables [NAL-206], (2) End-toEnd Connectors [NAL-200], On/Off Switch, and (6) mounting screws. Consult factory if using with NMT-60 or NMT-96. 10' Cable 30' Cable To be used with NMT Series Class II LED Driver. Replaces included 10’ lead wire, to allow for 30’ or less length between run and LED Driver. Used to convert NATL-530HW and NATL-560HW into a direct plug-in driver. Junction Box for Hard Wiring Flexible Extension Cord NRA-125/6 NRA-125/12 NRA-125/18 NRA-125/72 NUSP-JBox To be used with NATL-530HW, NATL-560HW or NATL-5100 Drivers. Capable of feeding two separate runs. Accepts Romex® 6" Cable 12" Cable 18" Cable 72" Cable Used to extend length between NUSP-JBox and NATL-530HW & NATL-560HW. Can be joined together to create custom lengths. * NOTE: Requires power line interconnection cable to connect to Lightbar run except when used with NAL-250 te l. 8 0 0 .6 8 6 .6 6 7 2 w w w.n oralig h t in g .com 5M ML-LEDLBPF0712