s s A h r f l s d s f g d a d COMPLeTe ASSeMBLy PART NuMBeRS REMKE RSR SERIES ALUMINUM CORD GRIPS Conduit Size (NPT) 1/4" Cable Range Cord Grip Cord Grip With Mesh .125 .188 .250 .312 .375 RSR-0003 RSR-0004 RSR-0005 RSR-0006 RSR-0007* — RSR-0004-E RSR-0005-E RSR-0006-E RSR-0007-E – – – – – .188 .250 .312 .375 .438 3/8" .125 – .188 RSR-003 — RSR-004-E RSR-005-E .312 Remke – .375 RSR Series RSR-006 RSR-006-E Made in the USA, Aluminum Cord Grips .375 – .438 RSR-007* RSR-007-E are UL Listed & CSA Certified for use in both indoor and 1/2" .125 – .188 RSR-1003 — arc outdoor applications to prevent cable pullout, control RSR-1004-E .188 – .250 a tight seal RSR-1004 of bend, and to provide against environmental .250 – .312 RSR-1005 RSR-1005-E elements such.312 as –dirt, coolants. .375moisture and RSR-1006 RSR-1006-E .375 – .438 RSR-1007 RSR-1007-E .125 – .188 RSR-103 — .188 – .250 RSR-104 RSR-104-E Remke Straight Cord GripsRSR-105 are: .250 – .312 RSR-105-E .312 – .375 RSR-106 RSR-106-E •Available in stock in conduit sizes from ¼” to 3” .375 – .438 RSR-107 RSR-107-E .438 in – .500 RSR-108nickel-plated RSR-108-E •Fittings available machined aluminum, .500stainless – .562 RSR-109 aluminum, steel, steel, nylon and Valox® RSR-109-E .562 – .625 RSR-110 RSR-110-E •Available with.438 or without wire mesh inRSR-1208-E NPT, Pg/ – .500 stainless steel RSR-1208 ISO or Metric .500 threads. – .562 RSR-1209 RSR-1209-E .562 – .625 RSR-1210 RSR-1210-E RSR-1211* RSR-1211-E .562 – .688 .625 – .750 RSR-1212* RSR-1212-E .688 – .812Cord Grips RSR-1213* RSR-1213-E Remke 90 Degree are: 3/4" •Available in stock conduit sizes from 3/8” to 2” .125 –in.188 RSR-2103 RSR-2103-E .188 – .250 RSR-2104 RSR-2104-E •Fittings available in machined aluminum, nickel-plated . .250 – .312 RSR-2105 RSR-2105-E aluminum, nylon and Valox .312 – .375 RSR-2106 RSR-2106-E – .438 stainless RSR-2107 •Available with.375 or without steel wire mesh. RSR-2107-E .438 – .500 RSR-2108 RSR-2108-E .500 – .562 RSR-2109 RSR-2109-E .562 – .625 RSR-2110 RSR-2110-E .438 – .500 RSR-208 RSR-208-E .500 – .562 RSR-209 RSR-209-E .562 – .625 RSR-210 RSR-210-E .562 – .688 RSR-211 RSR-211-E .625 – .750 RSR-212 RSR-212-E .688 – .812 RSR-213 RSR-213-E .500 – .562 RSR-2309 RSR-2309-E .562 – .625 RSR-2310 RSR-2310-E .562 – .688 RSR-2311 RSR-2311-E .625 – .750 RSR-2312 RSR-2312-E .688 – .812 RSR-2313 RSR-2313-E .750 – .875 RSR-2314* RSR-2314-E .812 – .938 RSR-2315* RSR-2315-E .875 – 1.000 RSR-2316* RSR-2316-E *Cable may have to be stripped to pass through the bore of the body American-Made in Sizes from ¼” to 3” .188 – .250 RSR-004 .250 – .312 With or Without Wire Mesh RSR-005 MKE 1.800.383.1524 | RSR Series Straig Aluminum Cord Grips Tuff Seal™ RSR Se Aluminum Cord G are UL Listed and C Certified for use in b indoor and outd Specifications applications to prevent cable pullout, control cable pullout, control arc of ar be Material bend, and to provide aseal tightagainst seal against environme environmental •Aluminum with optional Viton O-Ring, Locknut & Wire Mesh elements such as dirt,moisture moistureand andcoolants. coolants. ® Certifications The breadth of the line encompasses conduit s •UL Listed – File # E53599 These cord grips with extern from •CSA 1/4"– File to# 28985 3" withfeatures fittingsasoffered in machi the straight RSR •NEC – Articles 400-10 aluminum, nickel-plated aluminum, stain 10. 90° grips cansteel, be ordered ® WEE Compliant steel, •ROHS nylon& and Valoxattachments, . Other features of the famic accommodate RSR Cord Grips include: Flammability Rating 2" and are available in machi •Fitting UL94V-2, Mesh Grip UL94HG n ® A unique design Valox with .a combination tighte Temperature Range surface that includes both a hex area and afor knut applications known •-40ºF to +300ºF (-40ºC to For +149ºC) surface IP Rating: such as oil and gas, ma n n •IP 54/NEMA 3 and 3R processing – RSR Available with or without stainless steel90° wireCord me •IP 65/NEMA 4 nickel-plated aluminum. •IP 67/NEMA embedded 6 Optional Viton® O-Ring ensure corrosion resistance and high •IP 42/NEMA and 12 watertight corrosion-resistant seal plated connectors also fea Available in NPT, Pg/ISO or that Metric threads stai similar to of polished n n Anti-friction washer that Tuff fits Seal between nut These gripsthe protect bushing for easier pull-out compression. and are used in cond the point where the electrical (Continues on pages 12-13) NOTES NOTES Cord Grip Accessories Cord Grip Accessories add "-L" to any part nu Locknuts: add "-L" to any Locknuts: part number O-Rings: add "-R" to any part nu O-Rings: add "-R" to any part number Nickel-plated aluminum: Special Configurations NOTICE Cord grips available in nickel-platedSpecial Configurations Special configurations and mate aluminum. Add "N" to end of prefix. Suitable for Special configurations and materials are available. use in (ex: RSR-0003 becomes RSRN-0003) Consult factory. corrosive Consult factory. environments All wire mesh is stainless steel. All wire mesh is stainless steel. Dimension on & certification page 50 & information 52 in TuffDimension & certification information Tuff-Seal Technical Reference. Technical Reference. www.remke.com REMKE RSR SERIES ALUMINUM CORD GRIPS RSR STRAIGhT CORd GRIP dIMeNSIONS RSR Straight Cord Grip Dimensions: ALuMINuM ANd NICKeL-PLATed ALuMINuM Conduit RSR Form A B Size Series Size Inside Body dia. 1⁄4" 000 1 0.34 0.44 3⁄8" 00 1 0.46 0.44 1⁄2" 1000 1 0.46 0.44 1⁄2" 100 2 0.62 0.56 1⁄2" 1200 3 0.62 0.54 3⁄4" 2100 2 0.62 0.56 3⁄4" 200 3 0.81 0.57 3⁄4" 2300 4 0.81 0.57 1" 300 4 1.00 0.62 1" 3500 5 1.10 0.70 1 1⁄4" 400 5 1.30 0.70 1 1⁄2" 500 5 1.43 0.70 1 1⁄2" 5600 6 1.44 1.00 2" 600 6 2.03 0.80 2" 6700 7 1.90 1.31 2 1⁄2" 700 7 2.36 1.31 3" 8700 7 2.36 1.31 3" 900 9 3.05 1.39 Dimension A is the minimum Inside Body Diameter. Other dimensions are nominal. Dimension D is with the Nut snug but Bushing uncompressed. Dimension E is across the flats. NyLON ANd VALOX Conduit Size 3⁄8" 1⁄2" 3⁄4" STeeL Conduit Size 3⁄8" 1⁄2" 3⁄4" 1" STAINLeSS STeeL Conduit Size 3⁄8" 1⁄2" 3⁄4" 1" Form Size 1 2 3 A Inside Body dia. 0.44 0.50 0.56 Form Size 1 2 3 4 A Inside Body dia. 0.47 0.62 0.81 0.99 Form Size 1 2 3 4 A Inside Body dia. 0.47 0.62 0.81 1.00 C 0.59 0.59 0.59 0.72 0.86 0.72 0.86 0.97 0.97 1.25 1.25 1.25 1.72 1.72 3.50 3.50 3.50 3.35 B C 0.49 0.88 0.88 0.70 1.12 1.38 B C 0.44 0.56 0.56 0.63 0.56 0.69 0.85 0.94 B C 0.44 0.56 0.56 0.63 0.56 0.69 0.85 0.94 d Body hex 0.88 0.88 0.88 1.00 1.37 1.12 1.25 1.37 1.44 2.00 2.00 2.47 2.90 2.46 4.00 4.00 4.00 5.00 e Nut dia. 0.96 0.96 0.96 1.26 1.55 1.26 1.55 1.74 1.74 2.47 2.47 2.47 2.97 2.97 4.30 4.30 4.30 5.00 d Body hex 0.94 1.25 1.50 e Nut dia. 0.94 1.25 1.50 d Body hex 0.88 1.00 1.25 1.43 e Nut dia. 0.88 1.26 1.37 1.56 d Body hex 0.94 1.12 1.37 1.56 e Nut dia. 0.88 1.26 1.37 1.56 REMKE RSR SERIES ALUMINUM CORD GRIPS 90 Degree RSR Cord Grips Dimensions: RSR SeRIeS 90° CORd GRIP dIMeNSIONS CORD CONNECTORS Note: Dimension "E" is across flats d 2.00 2.39 2.88 3.13 4.41 4.41 5.56 above. e F Body hex Nut dia. 0.98 0.96 1.03 1.26 1.25 1.55 1.44 1.74 2.13 2.47 2.13 2.47 2.81 2.97 All other sizes have hex positioned per left view below. G 1.31 1.50 1.99 2.00 2.69 2.69 3.19 PICO-LINK Conduit A B C Size Body Bore 3⁄8" 0.45 0.44 1.51 1⁄2" 0.58 0.56 1.88 3⁄4" 0.76 0.63 2.25 1" 0.99 0.63 2.41 11⁄4" 1.28 0.69 3.19 11⁄2" 1.40 0.69 3.19 2" 1.90 0.81 4.03 NOTE: 1 1/4" and 1 1/2" size grips have hex positioned per right view WIRE MESH GRIPS ALuMINuM ANd NICKeL-PLATed ALuMINuM RSR SeRIeS 45° CORd GRIP dIMeNSIONS MICRO-LINK ALuMINuM ANd NICKeL-PLATed ALuMINuM CONduIT SeALS ANd LOCKNuTS Size 3⁄8" 1⁄2" 3⁄4" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 2.00 2.39 2.88 3.13 4.41 4.41 5.56 above. e F Body hex Nut dia. 0.98 0.96 1.03 1.26 1.25 1.55 1.44 1.74 2.13 2.47 2.13 2.47 2.81 2.97 All other sizes have hex positioned per left view below. 1.31 1.50 1.99 2.00 2.69 2.69 3.19 RSR SeRIeS CORd GRIPS WITh O-RINGS Locknuts LN-38 LN-50 LN-75 LN-100 LN-125 LN-150 LN-200 LN-250 LN-300 These Tuff-Seal RSR grips feature an O-ring that creates a watertight seal when they are used in a taper tapped conduit hub. In these applications gaskets must be used in either the knockouts or clearance drilled holes. To ensure a more reliable seal an embedded O-ring should be utilized. Many of the standard Tuff-Seal cord grips listed in this catalog feature a body hex large enough to permit machining a groove for the embedded O-ring. BUS SYSTEM PRODUCTS Conduit Seals SOR-38 SOR-1-VNT SOR-2 SOR-3 SOR-4 SOR-51 SOR-16 — — d MULTI-PORT BOXES Conduit A B C Size Body Bore 3⁄8" 0.45 0.44 1.51 1⁄2" 0.58 0.56 1.88 3⁄4" 0.76 0.63 2.25 1" 0.99 0.63 2.41 11⁄4" 1.28 0.69 3.19 11⁄2" 1.40 0.69 3.19 2" 1.90 0.81 4.03 NOTE: 1 1/4" and 1 1/2" size grips have hex positioned per right view MINI-LINK Note: Dimension "E" is across flats