Equipment and Accessory Guide
WELCOME
We welcome all newcomers to the world of Edhard!
Due to the versatility of our equipment and systems we have arranged the following concepts to help
guide you in making a decision or, at least, give you an understanding of the type of information your
Edhard representative will need in order to determine the best equipment to satisfy your requirements.
Before looking through this brochure please take some time to think about the following conditions
and answer the questions.
Dosing action
Å Inject - 1 or 2 at a time
Å Deposit - 1, 2 or 4 at a time
Å Fill - Jars, Bottles, Containers, etc.
Å Transfer
Product charactersitics
Å Is it smooth or does it have inclusions/particles?
Å If it has particles - what are their size and ratio to overall product?
Å What is the product’s viscosity or thickness?
Å Is it whipped and airy?
Å At what temperature is it to be dispensed - chilled, room temp, hot?
Å Does the product flow? Does a mound of it collapse and level or does it hold a shape?
Dosage amount
Å Fractions of an ounce to pounds
Å Grams to Kilograms
Pan or container configuration and size
Å 2-4 at a time - center to center spacing
Typical production run volume
Å Quantity of finished products produced daily.
Å Multiple mixing bowls? How many?
Å Expected equipment usage time daily / weekly.
The above information coupled with an understanding of the terminology on the following pages will
help you navigate this product listing and help your Edhard representative best understand your
needs.
EDHARD TERMINOLOGY
POWER BASE Cream-colored unit that houses electronics and motor. Engages Pump or Filler Unit
and makes them dispense product. Keypad controls the amount of product
dispensed, cycle-type and, in some models, the speed of output. Available in 3
-Series
PT
-Series
styles of table-top unit (PP-, PS- & PV
PV-Series
-Series) as well as the stand-alone unit (PT
PT-Series
-Series).
FILLER UNIT
A Lexan Hopper and Pump Housing combination coupled with a Pump Cover Assembly and Gear-Type Impellers. The Pump Housing and Hopper are fused together and
-Series
are not meant to be taken apart. Filler Units refer to the F- and FHP
FHP-Series
-Series. Accept a
wide variety of Spouts and Attachments. F-Series available in Single and Double
-Series available in Single Outlet only. Used for loose to medium
Outlet while FHP
FHP-Series
viscosity proucts.
PUMP A stainless steel, Single Outlet unit that houses either Gear-Type or Lobe-Type
Impellers and accepts a wide variety of Lexan and stainless steel Hoppers or a
FT
-Series only). Can dispense a wide range of viscosities. Used
Suction Tube (FT
FT-- & FTR
FTR-Series
PS-Series
solely on higher output Power Bases (PSPS-, PV
PV-- and PT
PT-Series
-Series).
HOPPER
Funnel constructed of either Lexan or stainless steel, which threads or clamps onto a
stainless steel Pump. Available in 6(5.5), 10(9.5), 18(17) and 36Qt.(34) capacities.
DOUBLE OUTLET
Refers to the amount of exit holes on a Filler Unit. Double Outlet Filler Units accept
only 7/16” (11.1) Dia. Spouts. These units are used primarily for injecting product into a
baked good (think donut or eclair filling).
SINGLE OUTLET
Refers to the amount of exit holes on a Filler Unit or Pump. Single Outlet Filler Units
and Pumps accept only 7/8” (22.2) Dia. Spouts. These units are primarily used for
depositing or layering product into containers (pans, bags, tubes etc.) or onto other
products (cakes, muffins, pie crusts, bagels etc.). Far more versatile in application than
the Double Outlet.
SPOUT
Any output attachment that enables you to inject, deposit, layer or otherwise dispense
product from a Filler Unit or Pump.
GEAR-TYPE Refers to the type of Impeller with 6 or more teeth. Used for smooth products of
varying viscosities. Standard in the F- & FHP
FHP-Series
FT-Series
-Series Filler Units and FS- & FT
-Series
Pumps. Available materials include: Polypropylene, UHMW, Nylon, PEEK & Stainless
LOBE-TYPE
Refers to the type of Impeller with 2 to 3 rounded lobes as opposed to traditional gear
teeth. Used for smooth products as well as products with suspended particles. The
maximum size of particles that can be passed without crushing is approximately 3/8”
RP
-Series
FTR
-Sr
eies
(9.6mm) Dia. (RP
RP-Series
-Series) and up to 1/2” (12.7mm) Dia. (FTR
FTR-Sr
-Sreies
eies). Effective with medium
-Series Pumps. Available materials
to higher viscosities. Standard in the RP
RP-- and FTR
FTR-Series
include: Viton, Stainless Steel & PEEK.
1
KEY
2
P-, PS- & PV
-Series
PV-Series
F
F
P
PUMP: Sits on the Power Base and is available in Stainless Steel. Accepts one
7/8ӯ (22.2mm) S spout. FS-Series uses 6-tooth Gear-type Impellers
-Series uses Lobe-type Impellers for wider
for smooth products. RP
RP-Series
range of products including those with particles up to 3/8ӯ (9.6mm).
Both accept removeable Hoppers H in either Lexan or Stainless Steel.
HOPPER: Attaches to Pump P . Available in 6Qt. (5L) and 18Qt. (17L) Lexan or
10Qt. (9L), 18Qt. (17L) and 36Qt. (34L) Stainless Steel.
H
P
J
D
S
T
T
C
FILLER UNIT
UNIT:: Sits on the Power Base and is available in Lexan. Accepts either one
7/8ӯ (22.2mm) S or two 7/16ӯ (11.1mm) D spouts. F-Series used
-Series used for a wider range
for lighter, less viscous products. FHP
FHP-Series
including more viscous and even semi-liquid products.
HOPPER A
CCESSOR
ACCESSOR
CCESSORYY: Pressure Disc keeps stiff products from cavitating. Heating Jackets help
maintain temperature in Stainless Steel Hoppers.
SPOUT
SPOUT:: Fits Filler Units and Pumps and available as either Double Output :
7/16ӯ (11.1mm) neck or Single Output : 7/8ӯ (22.2mm) neck.
THREADED AD
APT
ADAPT
APTOR:
OR: Orifices and Adaptors available in two thread sizes - 3/4” (19mm) and
7/8” (22.2mm).
CUPC
AKE SPOUT
CUPCAKE
SPOUT::
WER B
A SE A
CCESSOR
A PO
POWER
BA
ACCESSOR
CCESSORYY:
Stainless Steel Cupcake Spout with 4 down-spouts and various
center-to-center spacings. Available in two thread sizes - 3/4” (19mm)
and 7/8” (22.2mm).
Various accessories that fit any tabletop Power Base.
KEY
PT
-Series
PT-Series
Sits on the Power Base and is available in Stainless Steel. Accepts
-Series uses Gear-type Impellers
FT-Series
Adaptors A with sanitary flanges. FT
-Series uses two Lobe-type Impellers for wider
for smooth products. FTR
FTR-Series
range of products including those with particles up to1/2ӯ (12.7mm).
Both types can accept a removeable Stainless Steel Hopper H (for
viscous products) or a Suction Tube S (for less viscous and even
semi-liquid products).
P
PUMP:
S
SUCTION TUBE:
H
HOPPER:
Attaches to Hopper-type Pump P and used for more viscous
products. Available in 18Qt. (17L) and 36Qt. (34L) Stainless Steel.
A
AD
APT
OR:
ADAPT
APTOR:
Mates various types of Spouts, Elbows or Hoses S E H to any
FT- or FTR-Series Pump P .
S
E
CCESSOR
ACCESSOR
CCESSORYY :
H OUTPUT A
Attaches to Suction-type Pump P and allows product to be dosed
from any size mixing bowl or drum. Available in 1-1/4ӯ (w/ check
valve for loose, runny products) or 2ӯ (w/out check valve for thicker
products).
Various Spouts, Elbows and Hose Assemblies to finish off the depositing
system.
CDR
-Series
CDR-Series
P
PUMP:
G
DECORA
TING GUN:
DECORATING
H
HOSE A
SSEMBL
ASSEMBL
SSEMBLYY :
Sits on Power Base and is available in Gear-type and Lobe-type
versions. Accepts Stainless Steel and Lexan Hoppers H in 18Qt. (17L)
or 36Qt. (34L) capacities. Comes standard with De-aerator and
Bleeder Tube. Accepts CDR-type Hose Assembly.
Available in Pistol-type or Straight-type depending on user’s preference.
Pistol-type available in righthanded and lefthanded versions. Both types
will acept most sizes and types of decorating tips through the use of our
specially designed Adaptors.
Made to fit CDR-type Pumps P .
3
4
Equipment and Accessory Guide
Tabletop PPower
ower Bases
What fits me?
F
P-40
10:
-401
A
120VAC · 60/50Hz · 1/37Hp (20.2W) motor
Power Base · Model MK
What fits me?
F
120VAC · 60/50Hz · 1/15Hp (49.7W) motor
120VAC · 60/50Hz · 1/15Hp (49.7W) motor w/ 240RPM output
220VAC · 50/60Hz · 1/17Hp (43.9W) motor - Specify power cord plug type:
Australian, Euro, Italian, UK
P-40
12:
-401
P-40
12-HS
-401
2-HS:
P-4020
-4020:
F
A
Power Base · Model MKH
What fits me?
F
PS-4028
PS-4028:
PS-4030
PS-4030:
120VAC · 60/50Hz · 1/8Hp (93.2W) motor
220VAC · 50/60Hz · 1/8Hp (93.2W) motor - Specify power cord plug type:
Australian, Euro, Italian, UK
F
P
A
Power Base · Model MKS
What fits me?
F
PV
-4000
PV-4000
-4000:
PV
-400
1:
PV-400
-4001
F
P
120VAC · 50/60Hz · 1/4Hp (186.4W) motor
220VAC · 50/60Hz · 1/4Hp (186.4W) motor - Specify power cord plug type:
Australian, Euro, Italian, UK
Power Base · Variable Speed · Model MKV
Pumps and Filler Units
F
F
P H
What fits me?
F-5000
-5000:
F-500
1:
-5001
F-500
1 N/S
-5001
N/S:
F-5005
-5005:
F-5005 N/S
N/S:
6 Qt. (5.5L) capacity w/ 2 x F-3076 spouts
6 Qt. (5.5L) capacity w/ 2 x F-3011 spouts
6 Qt. (5.5L) capacity w/ no spouts
18 Qt. (17L) capacity w/ 2 x F-3011 spouts
18 Qt. (17L) capacity w/ no spouts
D
Filler Unit · Lexan · Double Outlet
OPTION
F
F-36
16:
-361
Higher strength replacement cover for
Lexan DoubleOutlet Filler Units
Pump Cover · Teflon-coated Aluminum · Double Outlet
What fits me?
S
F-5003
-5003:
F-5007
-5007:
OPTION
F
6 Qt. (5.5L) capacity
18 Qt. (17L) capacity
Filler Unit · Lexan · Single Outlet
F-36
15:
-361
Higher strength replacement cover for
Lexan SingleOutlet Filler Units
Pump Cover · Teflon-coated Aluminum · Single Outlet
What fits me?
FHP
-5025
FHP-5025
-5025: Gear-Type18 Qt. (17L) capacity
FHP
-5026
FHP-5026
-5026: Gear-Type6 Qt. (5.5L) capacity
FHP
-503
1: Gear-Type18 Qt. (17L) capacity w/ Pressure Disc
FHP-503
-5031
F
Filler Unit · Lexan · Single Outlet - High Pressure
S
P
A
5
Equipment and Accessory Guide
What fits me?
H
FS-3
153
FS-31
53:
FS-34
14:
FS-341
P
S
Gear-Type Stainless Impellers
Gear-Type Nylon Impellers
Pump · Stainless Steel · Single Outlet
What fits me?
RP
-3
160
RP-3
-31
60:
RP
-3527
RP-3527
-3527:
RP
-35
14:
RP-35
-351
P
Lobe-Type Viton 3-Lobe Impellers
Lobe-Type PEEK 3-Lobe Impellers
Lobe-Type Stainless 3-Lobe Impellers (High Heat)
H
S
Pump · Stainless Steel · Single Outlet
What fits me?
H
RP
-352
1:
RP-352
-3521
P
A
Lobe-Type Viton 3-Lobe Impellers w/ Sanitary Outlet
Pump · Stainless Steel · Single Outlet
What fits me?
H
RP
-3529
RP-3529
-3529:
P
S
Gear-Type PEEK Impellers - For Liquids
Pump · Stainless Steel · Single Outlet
What fits me?
P
FS-3
155
FS-31
55:
FS-3
150
FS-31
50:
H
6 Qt. (5.5L) capacity
18 Qt. (17L) capacity
Hopper · Lexan · for use on FS- and RP-Series Pumps
What fits me?
J
FS-2342
FS-2342:
FS-23
13 :
FS-231
FS-244
7:
FS-2447
FS-27
48
FS-2748
48:
10 Qt. (9.5L) capacity
18 Qt. (17L) capacity w/ 30° neck
18 Qt. (17L) capacity w/ 45° neck
36 Qt. (34L) capacity
H Hopper · Stainless Steel · for use on FS- and RP-Series Pumps
P
6
Equipment and Accessory Guide
Accessories and Spouts
P-3026
-3026:
NO
TE
NOTE
TE:
Footswitch for remote operation of all Power Bases
For Footswiches to fit older model Power Bases please
contact us for the proper connector type.
P-3634
-3634:
Used to raise any table-top Power Base over the work surface.
PS-3328
PS-3328:
Used to counterbalance a Hose Assy. on any table-top Power Base
A
Footswitch
A
Bridge
A
Balancer Assy.
FHP
-3368
FHP-3368
-3368:
FS-3202
FS-3202:
FS-330
1:
FS-3301
P
Lexan for use with 18 Qt. (17L) FHP-Series Filler Unit or FS-3150
Stainless Steel for use with 18 Qt. (17L) S.S. Hopper w/ 45° neck
Stainless Steel for use with 36 Qt. (34L) Hopper
Pressure Disc
FS-3269
FS-3269:
0:
FS-3270
FS-327
FS-327
1:
FS-3271
FS-327
2:
FS-3272
J
A P J D S T T C
120VAC
120VAC
240VAC
240VAC
·
·
·
·
Lower section for use on 18 Qt. (17L) S.S. Hopper w/ 30° neck
Upper section for use on 18 Qt. (17L) S.S. Hopper
Lower section for use on 18 Qt. (17L) S.S. Hopper w/ 30° neck
Upper section for use on 18 Qt. (17L) S.S. Hopper
Heating Jacket · Variable temperature
What fits me?
D
FS-3
148
FS-31
48:
CUS
CUSTTOM :
S
Spout · 7/8” Threaded Tip
Hose Assy. · 7/8”Threaded Tip - 36”(.914M) long for use on
F-, FS- and RP-Series Pumps
Hose Assy. · 7/8”Threaded Tip - Specify Length
T
Equipment and Accessory Guide
F-30
11:
-301
Donut · 7/16”Ø x 3-1/2”L (11.1mm x 89mm)
D
Spout · Double Outlet · Standard Tip
D
Spout · Double Outlet · Standard Tip
D
Spout · Double Outlet · Standard Tip
D
Spout · Double Outlet · Standard Tip
D
Spout · Double Outlet · Standard Tip
D
Spout · Double Outlet · 30° Tip
D
Spout · Double Outlet · 30° Tip
D
Spout · Double Outlet · 30° Tip
D
Spout · Double Outlet · 30° Tip
F-30
12:
-301
F-30
13:
-301
F-3065
-3065:
F-3064
-3064:
F-30
14:
-301
F-307
6:
-3076
F-3066
-3066:
F-308
1:
-3081
Eclair-Slit · 7/16”Ø x 5”L (11.1mm x 127mm)
Eclair · 7/16”Ø x 5”L (11.1mm x 127mm)
Long John-Slit · 5/16”Ø x 4-3/8”L (7.9mm x 111.1mm)
Long John · 5/16”Ø x 4-3/8”L (7.9mm x 111.1mm)
Blueberry · 7/16”Ø x 3-1/4”L (11.1mm x 82.5mm)
Munchkin · 9/32”Ø x 2-1/4”L (7.1mm x 57.1mm)
Frenchie · 3/16”Ø x 1-5/8”L (4.8mm x 41.3mm)
Berliner · 1/4”Ø x 1-5/8”L (6.4mm x 41.3mm)
7
8
Equipment and Accessory Guide
F-3094
-3094:
S
Spout · Standard Tip
S
Spout · Standard Tip
S
Spout · Standard Tip
S
Spout · Standard Tip
S
Spout · Standard Tip
S
Spout · 30° Tip
S
Spout · 30° Tip
S
Spout · 30° Tip
S
Spout · 90° Tip
S
Spout · 90° Tip
F-3092
-3092:
F-309
1:
-3091
F-3096
-3096:
F-3095
-3095:
F-3090
-3090:
F-3097
-3097:
F-3339
-3339:
F-3067
-3067:
F-3055
-3055:
Donut · 7/16”Ø x 3-1/2”L (11.1mm x 89mm)
Eclair-Slit · 7/16”Ø x 5”L (11.1mm x 127mm)
Eclair · 7/16”Ø x 5”L (11.1mm x 127mm)
Long John-Slit · 5/16”Ø x 4-3/8”L (7.9mm x 111.1mm)
Long John · 5/16”Ø x 4-3/8”L (7.9mm x 111.1mm)
Blueberry · 7/16”Ø x 3-1/4”L (11.1mm x 82.5mm)
Munchkin · 9/32”Ø x 2-1/4”L (7.1mm x 57.1mm)
Frenchie · 3/16”Ø x 1-5/8”L (4.8mm x 41.3mm)
Plain · 7/8”Ø x 7”L (22.2mm x 177.8mm)
Cannoli · 9/16”Ø x 3”L (14.3mm x 76.2mm)
9
Equipment and Accessory Guide
F-3043
-3043:
S
Spout · 90° Tip
S
Spout · Multi Tip
S
Spout · Multi Tip
F-3042
-3042:
F-3
101:
-31
45° · 7/8”Ø x 4-3/4”L (22.2mm x 120.6mm)
Croissant · 3/16”Ø x 1”L - 4 places (4.8mm x 25.4mm)
Triple · 3/16”Ø x 1”L - 3 places (4.8mm x 25.4mm)
What fits me?
FS-3305
FS-3305:
S
D
Double Spout Manifold · for use on FS- and RP-Series Pumps
with any Double Outlet Spout
Manifold
What fits me?
T
F-304
1:
-3041
F-3
103
03:
-31
F-307
2:
-3072
S
Cupcake · 3/4”Ø x 3-1/4”Spacing (19mm x 82.5mm)
Cupcake · 3/4”Ø x 3-1/2”Spacing (19mm x 89mm)
Cupcake · 3/4”Ø x 4”Spacing (19mm x 101.6mm)
Spout · 3/4” Threaded Tip
What fits me?
F-3
141:
-31
F-339
1:
-3391
CUS
CUSTTOM :
S
T
Universal Extension · 7/8”Ø x 6-1/4”L (22.2mm x 158.7mm)
Universal Extension · 7/8”Ø x 12-1/4”L (22.2mm x 311.1mm)
Universal Extension · 7/8”Ø x Specify Length
Spout · 7/8” Threaded Tip
What fits me?
S
FS-3335
FS-3335:
CUS
CUSTTOM :
S
Hose Assy. · 7/8”Threaded Tip - 36”(.914M) long w/ F-3141
Extension wand for use on F-, FS- & RP-Series Pumps
Hose Assy. · 7/8”Threaded Tip - Specify Length
Spout · w/ Stainless Extension and 7/8” Threaded Tip
T
10
Equipment and Accessory Guide
What fits me?
FS-327
7:
FS-3277
FS-3393
FS-3393:
FS-3394
FS-3394:
CUS
CUSTTOM :
S
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
·
·
·
·
·
·
·
·
·
·
·
·
3/4”Ø x 2-1/4”Spacing (19mm x 57.15mm)
3/4”Ø x 2-3/8”Spacing (19mm x 60.33mm)
3/4”Ø x 2-1/2”Spacing (19mm x 63.5mm)
3/4”Ø x 2-3/4”Spacing (19mm x 68.85mm)
3/4”Ø x 3-1/4”Spacing (19mm x 82.55mm)
3/4”Ø x 3-1/2”Spacing (19mm x 88.9mm)
3/4”Ø x 3-5/8”Spacing (19mm x 92.07mm)
3/4”Ø x 4”Spacing (19mm x 101.6mm)
3/4”Ø x 4-1/8”Spacing (19mm x 104.78mm)
3/4”Ø x 4-1/4”Spacing (19mm x 107.95mm)
3/4”Ø x 4-1/2”Spacing (19mm x 114.3mm)
Specify Spacing
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
Cupcake
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
7/8”Ø x 1-1/2”Spacing (22.2mm x 38.1mm)
7/8”Ø x 2”Spacing (22.2mm x 50.8mm)
7/8”Ø x 2-1/4”Spacing (22.2mm x 57.15mm)
7/8”Ø x 2-3/8”Spacing (22.2mm x 60.33mm)
7/8”Ø x 2-1/2”Spacing (22.2mm x 63.5mm)
7/8”Ø x 2-3/4”Spacing (22.2mm x 69.85mm)
7/8”Ø x 3”Spacing (22.2mm x 76.2mm)
7/8”Ø x 3-1/4”Spacing (22.2mm x 82.55mm)
7/8”Ø x 3-1/2”Spacing (22.2mm x 88.9mm)
7/8”Ø x 3-5/8”Spacing (22.2mm x 92.08mm)
7/8”Ø x 4”Spacing (22.2mm x 101.6mm)
7/8”Ø x 4-1/8”Spacing (22.2mm x 104.78mm)
7/8”Ø x 4-1/4”Spacing (22.2mm x 107.95mm)
7/8”Ø x 4-1/2”Spacing (22.2mm x 114.3mm)
Specify Spacing
x
x
x
x
4-3/4”L (22.2mm x 120.6mm)
8”L (22.2mm x 203.2mm)
10.5”L (22.2mm x 266.7mm)
Specify Length
C
What fits me?
T
Spout · 3/4” Threaded Tip
F-354
7:
-3547
-3532:
F-3532
F-3533
-3533:
F-359
1:
-3591
F-3534
-3534:
F-3535
-3535:
F-3560
-3560:
F-3557
-3557:
F-3494
-3494:
F-3525
-3525:
F-3559
-3559:
F-356
1:
-3561
F-3558
-3558:
F-3550
-3550:
CUS
CUSTTOM :
C
·
·
·
·
Spout · Extension
F-34
72:
-347
F-3590
-3590:
F-34
73 :
-347
F-3389
-3389:
F-3405
-3405:
F-3556
-3556:
F-34
74:
-347
F-3406
-3406:
F-3562
-3562:
F-3390
-3390:
F-34
75:
-347
CUS
CUSTTOM :
C
Cupcake
Cupcake
Cupcake
Cupcake
Spout · 7/8” Threaded Tip
F-32
12:
-321
T
Spout · Accessory
T
Spout · Accessory
F-32
13:
-321
Bread Roll · 3-3/8”Ø (85.7mm) w/ 7/8”Threaded Inlet
Bagel · 3-3/8”Ø (85.7mm) w/ 7/8”Threaded Inlet
What fits me?
T
11
Equipment and Accessory Guide
What fits me?
A
F-3
147:
-31
T
Dripless · 7/8” (22.2mm) Threaded Inlet
Valve
What fits me?
A
F-3
187
-31
87:
T
A
T
Dripless - Extended · 7/8” (22.2mm) Threaded Inlet
Valve
F-207
68
-20768
68:
Dripless - Bottle Filling · Used on F-3187 Dripless Valve Extended to aid
in filling bottles.
F-2327
-2327:
FS-2397
FS-2397:
CUS
CUSTTOM :
Decorating Tip · .56”Ø (14.2mm)
Decorating Tip · .38”Ø (9.7mm)
Decorating Tip · Specify Diameter
F-20
145
-201
45:
F-2887
-2887:
FS-27
60
FS-2760
60:
FS-27
39
FS-2739
39:
FS-27
40
FS-2740
40:
CUS
CUSTTOM :
Round · .22”Ø (5.6mm)
Round · .38”Ø (9.7mm)
Round · .47”Ø (12mm)
Round · .56”Ø (14.2mm)
Rectangular · .19 x .38” (4.8mm x 9.7mm)
Either Shape · Specify Siziing
F-207
61:
-2076
Bottle Filling · Used to aid in the filling of small-neck bottles.
Adaptor
Orifice
T
Orifice
T
Orifice
What fits me?
D
T
T
F-3267
-3267:
Spout · 7/8”(22.2mm) Thread - 7/16”Ø (11.1mm) accepts any
Double Outlet Spout
CD-3258
CD-3258:
CD-3259
CD-3259:
CD-3260
CD-3260:
CD-3266
CD-3266:
FS-3
188
FS-31
88:
Decorator Tip
Decorator Tip
Decorator Tip
Decorator Tip
Decorator Tip
Adaptor
Adaptor
·
·
·
·
·
#0 - #3
#4 - #6
#7 - #9
Euro
Small
12
Equipment and Accessory Guide
F-3580
-3580:
F-357
8:
-3578
F-32
11:
-321
F-3537
-3537:
F-3538
-3538:
F-354
1:
-3541
F-3540
-3540:
F-3496
-3496:
F-34
78:
-347
F-34
79:
-347
F-3588
-3588:
F-3589
-3589:
CUS
CUSTTOM :
T
·
·
·
·
·
·
·
·
·
·
·
·
·
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
7/8ӯ
x
x
x
x
x
x
x
x
x
x
x
x
x
1-3/16”L (22.2mm x 30.18mm)
1-3/4”L (22.2mm x 44.45mm)
2”L (22.2mm x 50.8mm)
2-1/2”L (22.2mm x 63.5mm)
2-3/4”L (22.2mm x 69.85mm)
3”L (22.2mm x 76.2mm)
3-1/4”L (22.2mm x 82.55mm)
3-1/2”L (22.2mm x 88.9mm)
4”L (22.2mm x 101.6mm)
4-1/2”L (22.2mm x 114.3mm)
5”L (22.2mm x 127mm)
5-1/2”L (22.2mm x 139.7mm)
Specify Spacing
What fits me?
T
Spout · Accessory · Threaded Tip
F-286
1:
-2861
F-24
19:
-241
F-2497
-2497:
F-2585
-2585:
F-24
18
-241
F-259
1:
-2591
F-2696
-2696:
F-2592
-2592:
F-2695
-2695:
F-2
144
44:
-21
F-20959
-20959:
F-2267
-2267:
F-20842
-20842:
F-20843
-20843:
CUS
CUSTTOM :
T
Double
Double
Double
Double
Double
Double
Double
Double
Double
Double
Double
Double
Double
Layering
Layering
Layering
Layering
Layering
Layering
Layering
Layering
Layering
Layering
Layering
Layering
Layering
Layering
Layering
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
1.19”L x .14”W (30mm x 3.6mm)
1.6”L x .08”W (40.6mm x 2mm)
1.6”L x .16”W (40.6mm x 4mm)
1.97”L x .10”W (50mm x 2.54mm)
2.36”L x .12”W (60mm x 3mm)
2.76”L x .12”W (70mm x 3mm)
2.76”L x .14”W (70mm x 3.6mm)
3.15”L x .10”W (80mm x 2.54mm)
3.15”L x .14”W (80mm x 3.6mm)
3.5”L x .19”W (89mm x 4.8mm)
3.5”L x .25”W (89mm x 6.4mm)
4”L x .28”W (101.6mm x 7.1mm)
4.33”L x .078”W (110mm x 2mm)
4.33”L x .393”W (110mm x 10mm)
Specify Length x Width
Spout · Accessory
What fits me?
S
FS-3392
FS-3392:
T
7/8” Thread to 7/8” Ø · Used to mate Single Outlet Spouts
to a 7/8” threaded tip (Ex. F-3141)
Adaptor
What fits me?
F-357
7:
-3577
F-3602
-3602:
F-3539
-3539:
F-3
140
-31
40:
CUS
CUSTTOM :
Double
Double
Double
Double
Double
T
Spout · Accessory · Threaded Tip
T
Valve
T
Valve
·
·
·
·
·
3/4ӯ
3/4ӯ
3/4ӯ
3/4ӯ
3/4ӯ
x
x
x
x
x
1-3/4”L (19mm x 44.45mm)
3”L (19mm x 76.2mm)
3-1/4”L (19mm x 82.55mm)
4-1/2”L (19mm x 114.3mm)
Specify Spacing
F-3
142
-31
42:
Dripless · 3/4” (19mm) Threaded Inlet
F-32
14 :
-321
Dripless - Extended · 3/4” (19mm) Threaded Inlet
T
13
PT-SERIES
The Edhard PT-Series is a stand-alone system that can be used as a dosing pump and
also as a transfer pump. Its reversible motor means that this system can be used with a
suction tube (for looser products) as well as a gravity-fed hopper (just
like our table-top units).
The system is comprised of four major components 1
2
3
4
Power Base
Pump
Cart
Suction TTube/Hopper
ube/Hopper
1
2
Various Accessories are available to finish off the
system - Batter Spouts, Elbows, Extensions, etc.
Remember, if you don’t see what you had in
3
mind chances are good that we can
manufacture something to meet your
specifications.
Please call or e-mail with any questions.
279 Blau Road · Hackettstown, NJ 07840 · USA
908.850.8444 · 888.edhard.1 · Fax: 908.850.8445
meter@edhard.com
4
14
Equipment and Accessory Guide
What fits me?
P
PT
-4035
PT-4035
-4035:
PT
-4036
PT-4036
-4036:
PT
-4037
PT-4037
-4037:
200W motor
200W motor
400W motor
120VAC
220VAC
220VAC
Model MKT
Model MKT
Model MKT
Power Base · Variable Speed · Transfer Type
PT
-80
10:
PT-80
-801
Stainless Steel · for use with PT-Series Power Bases
PT
-338
1:
PT-338
-3381
Used to counterbalance a Hose Asembly- attaches to column of PT-8010
Cart
Balancer Assembly
What fits me?
A
FT
-3342
FT-3342
-3342:
FT
-3465
FT-3465
-3465:
P
S
Gear-Type Stainless and Nylon Impellers
Gear-Type PEEK Impellers
Pump · Suction · Stainless Steel
What fits me?
A
FTR
-3343
FTR-3343
-3343:
P
FT
-337
5:
FT-337
-3375
FT
-3430
FT-3430
-3430:
S
Lobe-Type Viton 3-Lobe Impellers
Pump · Suction · Stainless Steel
Suction Tube
1-1/4ӯ w/ ball check valve
2ӯ w/out ball check valve
S
15
Equipment and Accessory Guide
What fits me?
FT
-3366
FT-3366
-3366:
FT
-3466
FT-3466
-3466:
FT
-34
70:
FT-34
-347
FT
-357
3:
FT-357
-3573
P
Gear-Type Stainless and Nylon Impellers
Gear-Type Stainless Impellers
Gear-Type PEEK Impellers · for Low-Viscosity products
Gear-Type PEEK Impellers · Single Outlet Housing
A
H
Pump · Hopper Feed · Stainless Steel
What fits me?
A
FTR
-337
1:
FTR-337
-3371
P
H
Lobe-Type Viton 3-Lobe Impellers
Pump · Hopper Feed · Stainless Steel
What fits me?
A
FTR
-35
16:
FTR-35
-351
P
H
Lobe-Type Viton 3-Lobe Impellers · Single Outlet Housing
Pump · Hopper Feed · Stainless Steel
What fits me?
FT
-20064
FT-20064
-20064:
FT
-20065
FT-20065
-20065:
FT
-20
131:
FT-20
-201
H
18 Qt. (17L) capacity w/ 45° neck
18 Qt. (17L) capacity w/ 30° neck
36 Qt. (34L) capacity
J
P
Hopper · Stainless Steel · for use on FT- and FTR-Series Pumps
What fits me?
S
FT
-3520
FT-3520
-3520:
A
A
Manifold · Double · 4” (101.6mm) spacing - sanitary connections
Adaptor
What fits me?
FT
-3399
FT-3399
-3399:
A
S
Sanitary Fitting to 7/8” Ø (22.2mm) · used to mate Single Outlet
Spouts to FT- or FTR-Series Pumps
Adaptor
What fits me?
FT
-20
176:
FT-20
-201
A
H
Hose to Sanitary Fitting · used to mate Hose Assy.
to FT- or FTR-Series Pumps
Adaptor
What fits me?
S
FT
-3586
FT-3586
-3586:
A
Adaptor
Connector · used to mate FT-Series Adaptors, Elbows, Batter
& Cupcake spouts to FT- or FTR-Series Pumps
E
16
Equipment and Accessory Guide
What fits me?
S
FT
-337
7:
FT-337
-3377
CUS
CUSTTOM :
A
E
Universal Extension · 1-1/8”Ø x 18-1/2”L (28.6mm x 470mm)
Universal Extension · 1-1/8”Ø x Specify Length
Adaptor
What fits me?
T
FT
-337
9:
FT-337
-3379
E
Universal Extension to 7/8” Thread · 1-1/8”Ø - 7/8”Thread (28.6mm - 22.2mm)
Elbow · Threaded Tip
What fits me?
C
FT
-3386
FT-3386
-3386:
E
Universal Extension to Cupcake Spout · 1-1/8”Ø - 7/8”Ø (28.6mm - 22.2mm)
Elbow · for use w/ F-Series Stainless Cupcake Spouts
What fits me?
S
FT
-337
8:
FT-337
-3378
E
S
S
S
Universal Extension to Cupcake Spout · 1-1/8”Ø - 1-1/8”Ø (28.6mm - 28.6mm)
Elbow · for use w/ FT-Series Stainless Cupcake Spouts
FT
-202
17:
FT-202
-2021
Batter
FT
-3395
FT-3395
-3395:
Double Batter
FT
-337
6:
FT-337
-3376
CUS
CUSTTOM :
Dripless Cupcake · 3-1/4” (82.55) spacing
Dripless Cupcake · Specify spacing
Spout
Spout
Spout
17
Equipment and Accessory Guide
FT
-3563
FT-3563
-3563:
-357
0:
FT-357
-3570
FT
FT
-3569
FT-3569
-3569:
FT
-3568
FT-3568
-3568:
FT
-3567
FT-3567
-3567:
FT
-3566
FT-3566
-3566:
FT
-3565
FT-3565
-3565:
FT
-357
1:
FT-357
-3571
FT
-3564
FT-3564
-3564:
CUS
CUSTTOM :
S
Cupcake · 3/4”Ø x 3-1/4”Spacing (11.1mm x 82.55mm)
Cupcake · 7/8”Ø x 2-3/4”Spacing (22.2mm x 69.85mm)
Cupcake · 7/8”Ø x 3-1/4”Spacing (22.2mm x 82.55mm)
Cupcake · 7/8”Ø x 3-3/8”Spacing (22.2mm x 85.73mm)
Cupcake · 7/8”Ø x 3-5/8”Spacing (22.2mm x 92.08mm)
Cupcake · 7/8”Ø x 4”Spacing (22.2mm x 101.6mm)
Cupcake · 7/8”Ø x 4-1/8”Spacing (22.2mm x 104.78mm)
Cupcake · 7/8”Ø x 4-1/4”Spacing (22.2mm x 107.95mm)
Cupcake · 7/8”Ø x 4-3/8”Spacing (22.2mm x 111.13mm)
Cupcake · Specify Spacing
What fits me?
T
T
Spout · 3/4” or 7/8” Threaded Tip
What fits me?
D
FT
-3402
FT-3402
-3402:
CUS
CUSTTOM :
H
T
Hose Assy. · 7/8”Threaded Tip - 36”(.914M) long
Hose Assy. · 7/8”Threaded Tip - Specify Length
Spout
What fits me?
S
FT
-3548
FT-3548
-3548:
CUS
CUSTTOM :
H
T
Hose Assy. · 7/8”Threaded Tip - 36”(.914M) long w/ F-3141
Extension wand for use on FT- & FTR-Series Pumps
Hose Assy. · 7/8”Threaded Tip - Specify Length
Spout
What fits me?
T
FT
-36
17:
FT-36
-361
CUS
CUSTTOM :
S
Spout · 7/8” Threaded Tip
CUS
CUSTTOM :
A
E
S
Bundt · 4x7/8”Ø on a 3-1/2”Ø (4x22.2mm x 88.9mm)
Bundt · 4x7/8”Ø x Specify Diameter
Custom
Spouts/Extensions/Orifices · Specify product, application, size, etc.
18
CDR-SERIES
The Edhard CDR-Series is a table-top system that can be used to ice and decorate cakes,
create buttercream ornaments, and dispense various petitshue and spritz cookie batters.
Its lack of a dosing function differs this series from
the rest of our systems - the product will dispense
as long as the trigger is pulled giving the operator
artistic freedom when looks are more important
than portion control.
The system is comprised of five major components 5
1
2
3
4
5
Power Base
Pump
Balancer
ating Gun
Hose/Decorating
Hose/Decor
essur
e Disc
Hopper/Pr
Hopper/Pressur
essure
A couple of gun styles and orientations are
available as are Adaptors to accept most sizes
3
of decorating tips.
4
Please call or e-mail with any questions.
2
279 Blau Road · Hackettstown, NJ 07840 · USA
908.850.8444 · 888.edhard.1 · Fax: 908.850.8445
meter@edhard.com
1
19
Equipment and Accessory Guide
What fits me?
F
CD-4050
CD-4050:
CD-4053
CD-4053:
120VAC · 60/50Hz · 1/4Hp (186.4W) motor
220VAC · 50/60Hz · 1/4Hp (186.4W) motor
Power Base · Model CD
What fits me?
H
CDR
-3449
CDR-3449
-3449:
P
H
Gear-Type Stainless Steel Impellers
Pump · Stainless Steel · Single Outlet
What fits me?
H
CDR
-3400
CDR-3400
-3400:
P
H
Lobe-Type Viton 3-Lobe Impellers
Pump · Stainless Steel · Single Outlet
What fits me?
P
FS-3
150
FS-31
50:
FS-244
7:
FS-2447
FS-27
48
FS-2748
48:
H
Hopper · Lexan or Stainless Steel
FHP
-3368
FHP-3368
-3368:
FS-3202
FS-3202:
FS-330
1:
FS-3301
P
18 Qt. (17L) capacity
18 Qt. (17L) capacity w/ 45° neck
36 Qt. (34L) capacity
Pressure Disc
Lexan for use with 18 Qt. (17L) Hopper [FS-3150]
Stainless Steel for use with 18 Qt. (17L) Hopper [FS-2447]
Stainless Steel for use with 36 Qt. (34L) Hopper [FS-2748]
20
Equipment and Accessory Guide
CD-3252
CD-3252:
A
Used to counterbalance a Hose and Gun Assy.
Balancer Assy.
What fits me?
G
CDR
-340
1:
CDR-340
-3401
H
Cake Decorator · Made specifically to fit CDR- Pumps
Hose
What fits me?
T
CD-3367
CD-3367:
G
Decorating · Straight-type
Gun · 7/8” Threaded Tip
What fits me?
CD-3308
CD-3308:
CD-33
11:
CD-331
CD-33
11LH
CD-331
1LH:
G
T
Elbow · Pistol-type Gun
Decorating · Pistol-type - Right handed
Decorating · Pistol-type - Left handed
Gun · 7/8” Threaded Tip
CD-3258
CD-3258:
CD-3259
CD-3259:
CD-3260
CD-3260:
CD-3266
CD-3266:
FS-3
188
FS-31
88:
Decorator Tip
Decorator Tip
Decorator Tip
Decorator Tip
Decorator Tip
T-4040
-4040:
T-404
1:
-4041
120VAC · 60Hz
220VAC · 50Hz
·
·
·
·
·
#0 - #3
#4 - #6
#7 - #9
Euro
Small
Adaptor
Turntable · Variable speed and Reversible direction
T
279 Blau Road · Hackettstown · New Jersey 07840 · USA
(TEL) 908.850.8444 · (FAX) 908.850.8445
888.edhard.1(USA & CANADA)
meter@edhard.com
A-2201
04.07