Captor Corporation
5040 South County Road 25A
Tipp City, Ohio, 45371
Phone: 937-667-8484 Fax: 937-667-5133
Email: sales@captorcorp.com
HEMP/EMP Filter # A-9600, HEMP/EMP Filters
Voltage : 0 to 480 Volts
Current : 0 to 100 Amps
Frequency : DC to 400 Hz
Insertion Loss : 100 dB minimum from 14 kHz to 10 GHz
Operating Temperature : -40 ºC to +71 ºC
Storage Temperature : -55 ºC to +105 ºC
Altitude : Maximum of 15,000 feet
Humidity : 10 to 90 Percent
Fungus : Non-nutritive materials are used
Corrosion : Hermetically sealed steel or aluminum enclosures with tin-lead plating
Specifications · Electrical Ratings · PCI - HEMP Parameters · Attributes/Options
Specifications
Voltage
0 to 480 V
Operating Temperature
-40 to +71 ºC
Storage Temperature
-55 to +105 ºC
Maximum Altitude
15000 ft
Humidity
10 to 90 %
Fungus
Non-nutritive materials are used
Corrosion
Hermetically sealed steel or aluminum enclosures with tin-lead plating
Maximum Dimension A
8.40 in
Dimension B
6.00 in
Note
With HEMP protection devices removed.
100 Ω line to line and 50 Ω line to ground.
Full load from 100 KHz to 20 MHz.
10/1/2016 | Page 1 of 3
Electrical Ratings
Voltage (Vrms)
35
Voltage (Peak)
50
Current
1/2 A
Frequency
DC-60 Hertz
DCR
≤ 1.5 Ω
DWV (DC)
200 V
Passband Response (Limit)
0 to 3000 Hertz, 1 dB
0 to 3500 Hertz, 3 dB
MIL-STD-220 Insertion Loss
(Limit)
100 dB Minimum from 14 kHz through 10 GHz
PCI - HEMP Parameters
Type
Short Pulse
Type of Injection
Common Mode
Wire-to-ground
Common Mode Peak ShortCircuit Current
5000 A
Wire-to-ground Peak ShortCircuit Current
2500 A
Common Mode Source
Impedance
≥ 60 Ω
Wire-to-ground Source
Impedance
≥ 60 Ω
Wire-to-ground Load
Impedance
50 Ω
Common Mode Residual Peak
Current
≤ 0.1 A
Wire-to-ground Residual Peak
Current
≤ 0.1 A
Attributes/Options
Meet or exceed the MIL-STD-188-125-1 requirements
Inductive Input
Choice of Termination Configurations
Quick Disconnect Terminal Tabs
Threaded Studs
Connectors
Can be supplied with HEMP Protection Modules
Supplied with Certified PCI data upon request
Existing Designs for:
Other Power Lines (Intersite)
Audio/Data Lines (Intersite)
Control/Signal Lines (Intersite)
10/1/2016 | Page 2 of 3
Existing Applications include:
AC/DC power
Telephone Lines
Analog Fire Alarms
Servo Motors
Synchro Transmitter
Custom tailoring for your unique application
10/1/2016 | Page 3 of 3