Designer
wallplate opening
Diva dimmers and fan controls
®
2.94 in (75 mm)
Product family features
4.69 in (119 mm)
.30 in
(7.6 mm)
profile
Shown actual size: Diva preset dimmer and
1-gang Claro® wallplate in White (WH).
t
Large paddle switch with a captive linear-slide
dimmer for a standard designer wallplate opening
t
Preset dimmer
t
Select lighter color models feature built-in soft-glow
locator light
t
CtLTM dimmers offer more reliable dimming
performance over standard dimmers when
dimming CFLs and LEDs; they also provide full
range dimming for incandescent and halogen bulbs
as well as mixed loads types
t
CtL dimmers feature HEDTM Technology with
advanced dimming circuitry designed for
compatibility with most high-efficacy light bulbs
t
eco-dim® model available
t
1000 W preset dimmers have voltage compensation,
which maintains stable light levels, despite line
voltage variations
t
Coordinating Claro®, Satin Colors® and Stainless
Steel wallplates only available separately
t
Custom engraving available for wallplates,
see pg. 155
Control types
Single-pole (one location)
3-way or 4-way (two or more locations)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Dimmable CFL/LED lighting (screw-base)
C
Ceiling fans
Load type requiring load interface
Neon/cold cathode lighting
Lighting load interfaces may be applicable
for some additional load type, voltage and
capacity combinations.
For additional information, see pg. 174.
www.lutron.com | 1.800.523.9466 |
86
Designer
wallplate opening
Diva dimmers and fan controls
®
Available finishes
Use BOLD color code in model number (Example: DV-600P-BR)
Gloss finishes*
LA
Light Almond
AL
Almond
IV
Ivory
GR
Gray
BR
Brown
BL
Black
SW
Snow
LS
Limestone
BI
Biscuit
ES
Eggshell
PD
Palladium
TP
Taupe
ST
Stone
BG
Bluestone
PL
Plum
SG
Sea Glass
TQ
Turquoise
GS
Goldstone
DS
Desert Stone
GB
Greenbriar
MS
Mocha Stone
TC
Terracotta
SI
Sienna
HT
Hot
MR
Merlot
MN
Midnight
WH
White
Satin finishes*
SS
Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 160.
Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate
Black (BL) or Midnight (MN) controls.
www.lutron.com | 1.800.523.9466 |
87
Designer
wallplate opening
Diva dimmers and fan controls
®
Dimmers
Fan controls and switches
Dimmers
Fan controls
t
Paddle turns on/off
t
Paddle turns on/off
t
Slide up to brighten;
down to dim
t
Slide up to increase speed;
down to decrease speed
t
Locator light shines
through paddle on select lighter
colored models
t
Three quiet fan speeds for
increased comfort
t
t
CtLTM models provide more reliable
dimming for screw-base CFL and
LED lighting loads
For use with only one ceiling
paddle fan
t
Does not include locator light
t
Designed to prevent motor hum
t
Paddle turns on/off
t
Use with any 15 A load
t
General purpose
switching of all sources
and motor loads
t
Available with locator light
t
eco-dim® model guarantees
at least 15% energy savings
compared to a standard switch
Switches
www.lutron.com | 1.800.523.9466 |
88
Designer
wallplate opening
Diva dimmers and fan controls
®
Connections overview
Load connections*
Magnetic
Electronic
Fluorescent
Low-Voltage Low-Voltage Lighting
Incandescent/
Halogen
Transformer
(by others)
eco-dim® Incandescent/ CtLTM
Dimmer
Dimmer Halogen
Dimmer
MLV
Dimmer
ELV
Transformer
(by others)
ELV
Dimmer
Lutron ®
Dimming
Ballasts
LED
Screw-base
rew
Ceiling
CFL/LED
Fan
Switched
Lighting/Fans
Lutron
Hi-lume ®
LED Driver
Fluorescent
Dimmer
Fluorescent CtL
Dimmer
Dimmer
(3-wire only)
Fan
Control
Switch
Control types (for 2 or more locations)
Dim from one location, switch from the others
Light
Source
3-way
Dimmer
3-way
Switch
Light
Source
3-way
Dimmer
4-way
Switch
(1 or more)
3-way
Switch
For more information on ballasts, visit www.lutron.com/ballasts.
For more information on LED drivers, visit www.lutron.com/LED.
*For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
89
Designer
wallplate opening
Diva dimmers and fan controls
®
Dimmer model numbers
Incandescent/halogen dimmers
Dimmable CFL bulbs (screw-base)
Dimmable LED bulbs (screw-base)
Dimmers
Single-pole
120 V 600 W
Single-pole
120 V 1000 W
DV-600P-CC3
DVSC-600P-CC4
DV-10P-CC3
DVSC-10P-CC4
3-way
120 V 600 W
3-way
120 V 1000 W
3
DV-603P-CC
DVSC-603P-CC4
DV-103P-CC3
DVSC-103P-CC4
3-way/single-pole
120 V 600 W
3-way/single-pole
120 V 600 W
DVCL-153P-CC3
DVSCCL-153P-CC4
Refer to the “how to calculate wattage when
mixing lamp types” table on, www.lutron.com/
dimcflled, when using a combination of bulb
types with the CtLTM dimmer.
eco-dim® dimmer with locator light
3-way/single-pole
120 V 600 W
DV-603PG-EE2
eco-dim model guarantees at least 15% energy
savings compared to a standard switch.
Dimmers
3-way/single-pole
120 V 150 W
3-way/single-pole
120 V 150 W
DVCL-153P-CC3
DVSCCL-153P-CC4
Refer to the “how to calculate wattage when
mixing lamp types” table on, www.lutron.com/
dimcflled, when using a combination of bulb
types with the CtL dimmer.
Visit www.lutron.com for an approved list of
dimmable CFL/LED bulbs.
Magnetic low-voltage dimmers
Dimmers
Single-pole
120 V 600 VA (450 W)
Single-pole
120 V 1000 VA (800 W)
DVLV-600P-CC3
DVSCLV-600P-CC4
DVLV-10P-CC3
DVSCLV-10P-CC4
3-way
120 V 600 VA (450 W)
3-way
120 V 1000 VA (800 W)
DVLV-603P-CC3
DVSCLV-603P-CC4
DVLV-103P-CC3
DVSCLV-103P-CC4
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
CC3: Gloss color codes, see pg. 87
CC4: Satin color codes, see pg. 87
EE2: Available in White (WH), Ivory (IV), Almond
(AL) and Light Almond (LA)
(Wallplates not included with above, order
separately, see pg. 160)
www.lutron.com | 1.800.523.9466 |
All models must be derated if ganged unless
otherwise noted, see pg. 170.
90
Designer
wallplate opening
Diva dimmers and fan controls
®
Dimmer model numbers
Electronic low-voltage dimmers*
Dimmers
Single-pole
120 V 300 W
DVELV-300P-CC3
DVSCELV-300P-CC4
3-way
120 V 300 W
DVELV-303P-CC3
DVSCELV-303P-CC4
Only certain LED drivers are dimmable using an
ELV dimmer, visit www.lutron.com/LED for
more information.
3-wire fluorescent dimmers*
Dimmers
3-way/single-pole
120 V 8 A
3-way/single-pole
277 V 6 A
DVF-103P-CC3
DVSCF-103P-CC4
DVF-103P-277-CC3
DVSCF-103P-277-CC4
0-10 V dimmers
(current sink control)
Dimmers
DVTV-CC3
Single-pole
30 mA max control current
Single-pole
30 mA max control current
DVSCTV-CC4
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
PowerPack: PP-120H, PP-277H or PP-347H.
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
For compatible 0-10 V LED drivers by others,
visit www.lutron.com/LED.
No derating required if ganged.
For use with Hi-lume®, Hi-lume® Compact SE,
Hi-lume® 3D, Eco-10®, EcoSystem® ballasts.
Adjustable high-end and low-end trim.
Also compatible with Hi-lume® LED driver.
Tu-Wire® fluorescent dimmers
No derating required if ganged.
Dimmers
Adjustable low-end trim.
3-way/single-pole
120 V 5 A
DVFTU-5A3P-CC3
DVSCFTU-5A3P-CC4
Also compatible with Advance Mark X
ballasts, for further information visit
www.lutron.com/advance.
For information on use with Universal and
OSRAM ballasts, contact Technical Support
at 1.800.523.9466.
3
CC : Gloss color codes, see pg. 87
CC4: Satin color codes, see pg. 87
(Wallplates not included with above, order
separately, see pg. 160)
www.lutron.com | 1.800.523.9466 |
All models must be derated if ganged unless
otherwise noted, see pg. 170.
For more information on Lutron ballasts, visit
www.lutron.com/ballasts.
*Requires neutral wire connection.
91
Designer
wallplate opening
Diva dimmers and fan controls
®
Dimmer model numbers
Fan control and switch model numbers
Hi-lume® LED drivers:
3-wire fluorescent dimmers*
Fan controls
Fan controls—quiet 3-speed
Dimmers
3-way/single-pole
120 V 8 A
3-way/single-pole
277 V 6 A
3
DVF-103P-CC
DVSCF-103P-CC4
DVF-103P-277-CC3
DVSCF-103P-277-CC4
Exclusively compatible with Hi-Lume LED driver
For more information on Hi-lume LED drivers,
visit www.lutron.com/HilumeLED.
3-way/single-pole
120 V 1.5 A
3-way/single-pole
120 V 2.0 A
DVFSQ-F-CC3
DVSCFSQ-F-CC4
DVFSQ-F-HO-CC3
DVFSQ-F-HO model for use with specific fans
such as Hunter Original Series.
Does not include built-in locator light.
No derating required if ganged.
No derating required if ganged.
Adjustable low-end trim.
Switches
General purpose switches
0-10 V LED dimmers:
0-10 V dimmers
(current sink control)
Dimmers
Single-pole
30 mA max control current
DVTV-CC3
Single-pole
30 mA max control current
DVSCTV-CC4
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
PowerPack: PP-120H, PP-277H or PP-347H.
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
For compatible 0-10 V LED drivers by others,
visit www.lutron.com/LED.
Single-pole
120/277 V 15 A
CA-1PSH-CC3
SC-1PS-CC4
3-way
120/277 V 15 A
CA-3PSH-CC3
SC-3PS-CC4
4-way
120/277 V 15 A
CA-4PSH-CC3
SC-4PS-CC4
General purpose switches with locator light
Single-pole
120 V 15 A
CA-1PSNL-EE2
SC-1PSNL-EE10
3-way
120 V 15 A
CA-3PSNL-EE2
SC-3PSNL-EE10
4-way
120 V 15 A
CA-4PSNL-EE2
SC-4PSNL-EE10
No derating required if ganged.
No derating required if ganged.
Adjustable high-end and low-end trim.
CC3: Gloss color codes, see pg. 87
CC4: Satin color codes, see pg. 87
EE2: Only available in Almond (AL), Ivory (IV),
Light Almond (LA) and White (WH)
EE10: Available in Biscuit (BI), Eggshell (ES),
Goldstone (GS), Limestone (LS), Sea Glass
(SG) and Snow (SW)
(Wallplates not included with above, order
separately, see pg. 160)
www.lutron.com | 1.800.523.9466 |
All models must be derated if ganged unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
92
Designer
wallplate opening
Diva dimmers and fan controls
®
Accessories
Wallplates
4.75 in (121 mm)
Shown actual size:
2-gang Claro® wallplate
in White (WH).
For more information
about Designer wallplates,
see pg. 160.
4.69 in (119 mm)
.30 in
(7.6 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Designer electrical
devices, see pg. 163.
Tamper resistant
GFCI receptacle
Customizable
6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack
93
Wallplates and accessories | Designer | Claro /Satin Colors
®
®
4.75 in (121 mm)
Shown actual size:
Maestro dimmers
and 2-gang Claro
wallplate in White (WH).
4.69 in (119 mm)
.30 in
(7.6 mm)
profile
Ganging and derating
Product family features
t
Can be used in conjunction with the
following dimmer(s) and switch(es):
Maestro®, Maestro IR®, Maestro Wireless®,
PicoTM wireless control, Spacer System®,
Diva®, Lyneo® Lx, Skylark®, Skylark ContourTM
t
All Lutron® wallplates are screwless, seamless
and have no visible hardware; the front plate
securely snaps into the alignment adapter plate
t
Full line of wiring devices in designer style opening
t
Blank inserts available for Gloss colors (DV-BI-) and
Satin colors (SC-BI-)
t
Customize your designer wallplate with engraving,
contact customer service to get started at
1.888.LUTRON1
www.lutron.com | 1.800.523.9466 |
t
Designer wallplates use standard ganging
t
Requires fins to be removed from dimmers for
proper spacing (“Fins Broken” ganging),
see pg. 170
t
May require derating (i.e., reduction of dimmer
capacity due to fin removal), see Derating
Tables, pg. 172
160
Wallplates and accessories | Designer | Claro /Satin Colors
®
®
Available finishes
Use BOLD color code in model number (Example: SC-1-PL)
Gloss finishes
LA
Light Almond
AL
Almond
IV
Ivory
GR
Gray
BR
Brown
BL
Black
SW
Snow
LS
Limestone
BI
Biscuit
ES
Eggshell
PD
Palladium
TP
Taupe
ST
Stone
BG
Bluestone
PL
Plum
SG
Sea Glass
TQ
Turquoise
GS
Goldstone
DS
Desert Stone
GB
Greenbriar
MS
Mocha Stone
TC
Terracotta
SI
Sienna
HT
Hot
MR
Merlot
MN
Midnight
WH
White
Satin finishes
SS
Stainless Steel*
*Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate
Black (BL) or Midnight (MN) controls and accessories.
www.lutron.com | 1.800.523.9466 |
161
Wallplates and accessories | Designer | Claro /Satin Colors
®
®
Wallplates for Maestro®, Maestro IR®, Maestro Wireless®, PicoTM wireless control, Spacer System®,
Diva®, Lyneo® Lx, Skylark® and Skylark ContourTM
1-gang*
CW-1-CC2
SC-1-CC4
CW-4-CC2
SC-4-CC4
W: 8.37 in (213 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
W: 2.94 in (75 mm); H: 4.69 in (119 mm)
D: .30 in (7.6 mm)
2-gang*
4-gang*
CW-2-CC2
SC-2-CC4
5-gang*
CW-5-CC2
SC-5-CC4
W: 10.18 in (259 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
W: 4.75 in (121 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
Multiple devices with line and low-voltage can
be mounted behind a common wallplate using
a standard barrier backbox, see Application
Note #213 (Combining Low-Voltage and Line
Voltage Wiring Devices in a Multi-Gang Box) at
www.lutron.com/applicationnotes.
3-gang*
CW-3-CC2
SC-3-CC4
W: 6.56 in (167 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
CC2: Gloss and Stainless Steel color codes,
see pg. 161
CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
Multi-gang dimmer installations may require
derating, see pg. 170.
*Stainless Steel finish wallplates include black
plastic trim/adapter, visible from side. Match
with separate Black (BL) or Midnight (MN)
controls and accessories.
162
Wallplates and accessories | Designer | Claro /Satin Colors
®
®
Receptacles
CW-6-CC2
SC-6-CC4
6-gang*
W: 12.00 in (305 mm); H: 4.69 in (119 mm);
D: .30 in (7.6 mm)
Tamper resistant receptacles
15 A, 125 V*
CARS-15-TR-CC3
SCRS-15-TR-CC4
20 A, 125 V*
SCRS-20-TR-CC4
Receptacles
Cable jacks
t
F-style, 75-Ohm coaxial cable
15 A, 125 V*
CAR-15 H-CC3
SCR-15-CC4
20 A, 125 V*
SCR-20-CC4
GFCI Receptacles
CA-CJH-CC3
SC-CJ-CC4
Single cable jack*
t
Press test button to confirm LED
indicator status
t
Press reset button to reset GFCI
after circuit interruption
Telephone jacks
t
6-conductor telephone jack, RJ11
Single telephone jack*
15 A, 125 V*
GFCI
CAR-15-GFTR-CC3
SCR-15-GFTR-CC4
20 A, 125 V*
GFCI
SCR-20-GFTR-CC4
CA-PJH-CC3
SC-PJ-CC4
CC2: Gloss and Stainless Steel color codes,
see pg. 161
3
CC : Gloss color codes, see pg. 161
CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
Tamper resistant GFCI receptacles
*Stainless Steel finish only available as separate
wallplate. Match with separate Black (BL) or
Midnight (MN) controls and accessories.
163
Wallplates and accessories | Designer | Claro /Satin Colors
®
Receptacles for dimming use
®
Receptacles for dimming use
t
Duplex for dimming both
connected loads
t
Duplex for dimming both
connected loads
t
Projecting nubs prevent
standard plugs from
being used
t
Projecting nubs prevent
standard plugs from
being used
t
Requires replacement
plugs for dimming use
t
Requires replacement
plugs for dimming use
t
15 A model shown
t
Tamper resistant
shutter mechanism
Duplex for dimming use
2
15 A
15 A
120/125 V*
120/125 V*
CAR-15-DFDU-CC
SCR-15-DFDU-CC4
20 A
20 A
120/125 V*
120/125 V*
CAR-20-DFDU-CC2
SCR-20-DFDU-CC4
Receptacles for dimming use
t
Top half for dimming
t
Projecting nub prevents
standard plug from being used
t
t
Dual dimming tamper resistant
15 A
15 A
120/125 V*
120/125 V*
CAR-15-DDTR-CC2
SCR-15-DDTR-CC4
20 A
20 A
120/125 V*
120/125 V*
CAR-20-DDTR-CC2
SCR-20-DDTR-CC4
Receptacles for dimming use
Requires replacement plugs for
dimming use
Bottom half is a general use
receptacle and will fit standard
duplex plugs
Split duplex (half for dimming use)
15 A
15 A
120/125 V*
120/125 V*
CAR-15-HFDU-CC2
SCR-15-HFDU-CC4
20 A
20 A
120/125 V*
120/125 V*
CAR-20-HFDU-CC2
SCR-20-HFDU-CC4
t
Top half for dimming
t
Projecting nub prevents
standard plug from being used
t
Requires replacement plugs for
dimming use
t
Bottom half is a general use
receptacle and will fit standard
duplex plugs
t
15 A model shown
t
Tamper resistant
shutter mechanism
Half dimming tamper resistant
CC2: Gloss color code and Stainless Steel,
see pg. 161
CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
15 A
15 A
120/125 V*
120/125 V*
CAR-15-HDTR-CC2
SCR-15-HDTR-CC4
20 A
20 A
120/125 V*
120/125 V*
CAR-20-HDTR-CC2
SCR-20-HDTR-CC4
*Stainless Steel finish only available as separate
wallplate. Match with separate Black (BL) or
Midnight (MN) controls and accessories.
164
Wallplates and accessories | Designer | Claro /Satin Colors
®
®
Replacement plug for dimming
(use with receptacles on left)
t
This plug required for use with
Lutron® receptacles for dimming
use—plug will work in standard
receptacle
t
Easily replaces the existing plugs
on lamps
120/125 V
White
RP-FDU-10-WH
120/125 V
Brown
RP-FDU-10-BR
UL/CSA/NOM regulatory approvals.
Important notes
t
If the hot and dimmed hot feeds to the split
duplex HFDU are supplied from different circuits or
split-wired with separate switch-legs, a means to
simultaneously disconnect these circuits must be
provided at the panel board where they originate
(NEC 210.7(C) 2002 Edition). A 2-pole circuit
breaker or two single-pole circuit breakers with an
approved handle tie can be used to accomplish
this simultaneous disconnect. Feed-through
dimming panels, which are those without breakers,
are recommended when using the HFDU.
t
Receptacles and plugs for dimming use are
UL listed for use with all Lutron® wallbox dimmers
included in this catalog.
t
If there is only one electrical feed to the receptacle,
then the duplex DFDU must be used.
t
For detailed information, see Application Notes #91
(Guide to Dimming Table Lamps) and #109 (Guide
to Dimming Portable Lamps via Receptacles) at
www.lutron.com/applicationnotes.
CC2: Gloss color code and Stainless Steel,
see pg. 161
CC4: Satin color codes, see pg. 161
www.lutron.com | 1.800.523.9466 |
*Stainless Steel finish only available as separate
wallplate. Match with separate Black (BL) or
Midnight (MN) controls and accessories.
164A
Wallplates and accessories | Designer | Claro /Satin Colors
®
Field customizable 6-port frame
t
®
Switches
Shipped with six blanks in
matching colors
t
Paddle turns on/off
t
Use with any 15 A load
t
Connectors and wallplate
sold separately
t
General purpose switching of all
sources and motor loads
t
Connectors snap in
(no tools required)
t
No derating if ganged
t
Connectors available in
White (WH), unless noted
CA-6PF-CC3
SC-6PF-CC4
6-port frame*
Connectors for 6-port frame
General purpose switches (120/277 V)
Single-pole
15 A*
CA-1PSH-CC3
SC-1PS-CC4
3-way
15 A*
CA-3PSH-CC3
SC-3PS-CC4
4-way
15 A*
CA-4PSH-CC3
SC-4PS-CC4
Telephone/network jacks
8-conductor,
RJ45 category 3
CON-1P-C3-EE4
8-conductor,
RJ45 category 5e
CON-1P-C5E-EE4
8-conductor,
RJ45 category 6
CON-1P-C6-EE4
Fiber jacks
MT-RJ feed through
CON-1F-MTRJ-WH
SC simplex
CON-1F-SC-WH
LC non-flush mount
CON-1F-LC-WH
ST style
CON-1F-ST-WH
General purpose switch with locator light
(120 V only)
Single-pole
15 A*
CA-1PSNL-EE2
SC-1PSNL-EE10
3-way
15 A*
CA-3PSNL-EE2
SC-3PSNL-EE10
4-way
15 A*
CA-4PSNL-EE2
SC-4PSNL-EE10
Cable jack
F-style,
75-Ohm coaxial cable
CON-1C-EE4
BNC jack
BNC connector, 50-Ohm
CON-1B-WH
Connectors only for use with 6-port frame.
CC3: Gloss color codes, see pg. 161
CC4: Satin color codes, see pg. 161
EE2: Only available in Almond (AL), Ivory (IV),
Light Almond (LA) and White (WH)
EE4: Only available in White (WH) and Black (BL)
EE10: Available in Biscuit (BI), Eggshell (ES),
Goldstone (GS), Limestone (LS), Sea Glass
(SG) and Snow (SW)
*Stainless Steel finish only available as separate
wallplate. Match with separate Black (BL) or
Midnight (MN) controls and accessories.
www.lutron.com | 1.800.523.9466 |
165
Appendix
| Multi-ganging
derating
Appendix
| Ganging andand
derating
How to understand ganging and derating
Standard ganging
Custom ganging for Architectural
style controls
Ganging is the side-by-side mounting of two
or more dimmers or accessory devices under
a multi-gang wallplate.
For Architectural style dimmers and switches,
it is possible to retain the maximum capacity of
dimmers in multi-gang applications via custom
architectural multi-gang:
Standard multi-gang installation:
t
Uses standard multi-gang electrical backboxes
t
Uses standard multi-gang wallplates
t
Requires fins to be removed from dimmers for
proper spacing (“Fins Broken” ganging)
t
May require derating (i.e., reduction of dimmer
capacity due to fin removal), see Derating
Tables, pgs. 172–173
t
May require customized, wider-thanstandard wallplates
t
May require wider-than-standard
electrical backboxes
t
Allows full capacity (“No Fins Broken”) ganging
t
Required for Nova® dimmers and for larger width
(high capacity) architectural controls
t
Visit www.lutron.com/customganging for
additional information
Standard ganging for dimmers, switches and accessories
New Architectural
Architectural
Designer
Traditional
pg. 148
pg. 152
pg. 160
pg. 166
Vierti®
Vareo®
Nova Tb®
Maestro®
Maestro IR®
Maestro Wireless®
Spacer System®
Diva®
Lyneo® Lx
Skylark®
Skylark ContourTM
Abella®
Ceana®
Ariadni®
Glyder®
Rotary
Derating Table 1
pg. 172
Derating Table 2
pg. 173
Derating Table 1
pg. 172
Derating Table 1
pg. 172
www.lutron.com | 1.800.523.9466 |
170
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
=
+
No fins broken
Full capacity
One Nova Tb®
dimmer
=
Standard 1-gang
backbox
+
=
Three Nova Tb dimmers
“Fins Broken” ganging
Standard 1-gang
architectural wallplate
+
Standard 2-gang
backbox
One fin broken*
Partial derating
Two Nova Tb dimmers
“Fins Broken” ganging
+
+
Standard 2-gang
architectural wallplate
+
Standard 3-gang
backbox
Inside: Two fins broken*
Full derating
Standard 3-gang
architectural wallplate
Outside: One fin broken*
Partial derating
Custom Architectural ganging example:
=
Two Nova Tb dimmers
“No Fins Broken” ganging
+
+
No fins broken
Full capacity
Backbox with
chase nipple
Custom architectural
wallplate
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily.
www.lutron.com | 1.800.523.9466 |
171
Appendix
| Multi-ganging
derating
Appendix
| Ganging andand
derating
Derating Table 1
New Architectural | Vierti®
Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark®
Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W
600 W
450 W
500 W
400 W
400 W
Incandescent
Dimmers
Dual dimmers
Magnetic low-voltage
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5A
4A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5A
4A
3A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A/3 A
5 A/3 A
3.5 A / 3 A
Maestro (light/fan)
8 A/3 A
6.5 A / 3 A
5 A/3 A
Abella (light/fan)
6 A/3 A
5 A/3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni
Tu-Wire®: Spacer System, Diva, Skylark
Fan controls
Fully variable
Fan/light controls
Fully variable
Electronic switches
www.lutron.com | 1.800.523.9466 |
172
Appendix
and derating
Appendix| |Multi-ganging
Ganging and derating
Derating Table 2
Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6A
no derating
no derating
8A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5A
4A
3.3 A
1.5 A
no derating
no derating
Fully variable
6A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent
Dimmers
Magnetic low-voltage
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vareo
Nova Tb
1
0-10 VDC control
Tu-Wire®
Fan controls
Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
1
PowerPack required for line voltage switching.
VETS-R-Auxiliary electronic tapswitches do not require derating.
2
www.lutron.com | 1.800.523.9466 |
173
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
Multi-location—true dimming from each location
eco-model available
E
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Vierti®*
pg. 14
capacity†
Dimmers
Incandescent/halogen 120 V
Magnetic low-voltage 120 V
Vareo®
pg. 20
Nova Tb® Nova®
pg. 34
pg. 26
Centurion®
pg. 42
M
600 W
M
1000 W
M
1500 W
WBX
2000 W
WBX
600 VA (450 W)
1000 VA (800 W)
1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
WBX
WBX
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
Neon/cold cathode
WBX
WBX
WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10® and EcoSystem® ballasts
8A
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
3F
Hi-lume, Hi-lume Compact SE,
8A
3F
Eco-10 and EcoSystem ballasts
16 A
3F
5A
PA
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
16 A
TVI
3F
3F
TVI
TVI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
*Consult Lutron Technical Support for information on interfaces with Vierti.
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
†
www.lutron.com | 1.800.523.9466 |
174
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
Multi-location—true dimming from each location
eco-model available
E
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Maestro® Maestro Maestro Spacer
pg. 46
IR® pg. 60 Wireless® System®
pg. 68
pg. 76
capacity†
M
600 W
E
Incandescent/halogen 120 V
M
M
Diva®
pg. 86
M
E
1000 W
1500 W
WBX
WBX
WBX
WBX
2000 W
WBX
WBX
WBX
WBX
1500 VA (1200 W)
WBX
WBX
WBX
WBX
2000 VA (1600 W)
WBX
WBX
WBX
WBX
600 VA (450 W)
WBX
WBX
WBX
WBX
1000 VA (800 W)
WBX
WBX
WBX
WBX
Magnetic low-voltage 120 V
600 VA (450 W)
1000 VA (800 W)
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
WBX
450 W
WBX
WBX
600 W
WBX
WBX
16 A
WBX
Neon/cold cathode
WBX
WBX
WBX
WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10® and EcoSystem® ballasts
8A
3F
3F
3F
16 A
3F
3F
3F
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
Hi-lume, Hi-lume Compact SE,
8A
3F
3F
3F
3F
Eco-10 and EcoSystem ballasts
16 A
3F
3F
3F
3F
5A
PA
PA
16 A
TVI
TVI
TVI
TVI
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
TVI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
175
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
Multi-location—true dimming from each location
eco-model available
E
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Lyneo® Lx Skylark
pg. 94
ContourTM
pg.100
Skylark®
pg. 104
Abella®
pg. 114
capacity†
Dimmers
Incandescent/halogen 120 V
M
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
WBX
2000 W
WBX
WBX
600 VA (450 W)
1000 VA (800 W)
WBX
1500 VA (1200 W)
WBX
WBX
2000 VA (1600 W)
WBX
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
450 W
WBX
600 W
WBX
16 A
Neon/cold cathode
WBX
WBX
WBX
WBX
3F
3F
3-wire
ballasts and Hi-lume® LED driver 120 V 6 A
3
H
Hi-lume, Hi-lume Compact SE,
Eco-10® and EcoSystem® ballasts
8A
16 A
3-wire ballasts and Hi-lume LED driver 277 V 6 A
3
H
Hi-lume, Hi-lume Compact SE,
8A
3F
3F
Eco-10 and EcoSystem ballasts
16 A
3F
3F
5A
PA
16 A
TVI
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
0
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
TVI
TVI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
176
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
Multi-location—true dimming from each location
eco-model available
E
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Ceana®
pg. 120
Ariadni®
pg. 124
Glyder®
pg. 130
Rotary
pg. 134
capacity†
Dimmers
Incandescent/halogen 120 V
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
2000 W
WBX
600 VA (450 W)
1000 VA (800 W)
1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
1000 VA (800 W)
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
Neon/cold cathode
WBX
3-wire
ballasts and Hi-lume® LED driver 120 V 6 A
3
H
Hi-lume, Hi-lume Compact SE,
Eco-10® and EcoSystem® ballasts
8A
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
3
H
Hi-lume, Hi-lume Compact SE,
8A
3F
Eco-10 and EcoSystem ballasts
16 A
3F
5A
PA
16 A
TVI
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
0
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
TVI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
177
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility
Incandescent, magnetic
and electronic
low-voltage (120/277 V)
3-wire Fluorescent
ballasts or Hi-lume®
LED drivers (120/277 V)
0-10 VDC Ballasts
or LED drivers
(120/277 V)
WBX
3F
TVI
Wallbox Phase Adaptive
Power Module*
Fluorescent
Power Module*
0-10 V
Interface
PHPM-WBX-DV-WH
PHPM-3F-DV-WH
GRX-TVI
Dimmer
Family
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Abella®
–
–
–
–
–
–
Ariadni®
–
AYF-103P-
–
AYF-103P-
–
AYF-103P-
Ceana®
–
–
–
–
–
–
–
DVF-103P-
–
DVF-103P-
–
DVF-103P-
–
DVSCF103P-
–
DVSCF103P-
–
DVSCF103P-
Glyder®
–
–
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
–
LXF-103PL-
–
LXF-103PL-
Diva®
Gloss
Diva
Satin Colors®
Maestro®
Gloss
Maestro®
Satin Colors®
Maestro
Wireless®
–
MAF-6AM-
–
MAF-6AM-
–
MAF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
Nova®
NF-10-
NF-103P-
NF-10-
NF-103P-
NF-10-
NF-103P-
Nova Tb®
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
Skylark®
SF-10P-
SF-103P-
SF-10P-
SF-103P-
SF-10P-
SF-103P-
Spacer
System®
–
SPSF-6AM-
–
SPSF-6AM-
SPSF-S6A-
SPSF-6AM-
Vareo®
–
VF-10-
–
VF-10-
–
VF-10-
contact Lutron
–
VTF-6AM-
Vierti®
contact Lutron
Use only dimmer model numbers listed.
*Dual 120/277 V model given,120 V only versions are also available.
Please see Technical notes, pg. 179.
www.lutron.com | 1.800.523.9466 |
178
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility
Tu-Wire® Fluorescent
Ballasts (120 V)
Switched Lighting
(120/277 V)
PA
SW
Phase Adaptive
Power Module*
Switching
Power Module*
PHPM-PA-DV-WH
PHPM-SW-DV-WH
Dimmer
Family
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Abella®
–
–
–
AB-S6AM-
Ariadni®
–
AYF-103P-
–
–
Ceana®
–
–
–
–
–
DVF-103P-
–
–
–
DVSCF-103P-
–
–
Glyder®
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
LX-1PSL-
LX-3PSL-
Diva®
Gloss
Diva
Satin Colors®
Technical notes
Maestro®
Gloss
Maestro®
Satin Colors®
Maestro
Wireless®
–
MAF-6AM-
–
MA-S8AM-
–
MSCF-6AM-
–
MSC-S8AM-
–
MRF2F6AN-DV-
–
MRF2-6ANS-
Nova®
NF-10-
NF-103P-
–
–
Nova Tb®
NTF-10-
NTF-103P-
–
–
Skylark®
SF-10P-
SF-103P-
–
–
Spacer
System®
SPSFS6A-
SPSF-6AM-
SPSFS6A-
SPSF-S6AM-
Vareo®
–
VF-10-
–
VETN-1000-
Vierti®
contact Lutron
contact Lutron
t
t
t
t
t
t
Lighting load interfaces
must be matched to
load type and voltage
All load interfaces
for dimmed load
are controlled by
a 120 V 3-wire
fluorescent dimmer
Power feed to dimmer
may differ from lighting
load/interface voltage
Interfaces typically require
additional power feeds
For wiring information,
consult wiring diagrams,
see pgs. 193-195
For assistance and
additional solutions,
consult Lutron
Technical Support
at 1.800.523.9466
(24 hours/7 days)
Interface mounting
t
t
PHPM interfaces mount
to 2-gang electrical
backbox (W: 6.30 in x
H: 5.10 in)
GRX-TVI enclosure is
surface mount only (W:
6.10 in x H: 12.50 in x
D: 3.30 in)
Use only dimmer model numbers listed.
*Dual 120/277 V model given,120 V only versions are also available.
Please see Technical notes, pg. 179.
www.lutron.com | 1.800.523.9466 |
179
Addendum | Advanced conceptual connections
Diva
®
3-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
2-wire
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact
U-Bent
Linear
0-10 V
Ballasts
(by others)
Tu-Wire®
Ballasts
Eco-10®
Ballasts
†
†
†
Phase
Adaptive
Power
Interface
3-Wire Fluorescent
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Tu-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
††
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
†
††
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
www.lutron.com | 1.800.523.9466 |
A28
Addendum | Advanced conceptual connections
Diva
®
LED
dimming
Low Voltage
dimming
Low Voltage
LED Lighting
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
Magnetic
Low Voltage
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
†
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
††
3-Wire
Fluorescent
Interface
†
†
†
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
†
††
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
www.lutron.com | 1.800.523.9466 |
A29
Addendum | Advanced conceptual connections
Diva
®
Incandescent
dimming
CFL/LED
dimming
Incandescent/
Halogen
Screw-base
CFL/LED
†
Wallbox
Phase
Adaptive
Interface
Incandescent/
Halogen
Dimmer
Incandescent/
Halogen
eco-dim®
Dimmer
CtLTM
Dimmer
3-Wire
Fluorescent
Dimmer
C tL
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A30
Addendum | Advanced conceptual connections
Diva
®
Switched
loads
Non-Dim
Lighting
Switched
Fan
Ceiling
fan
Switched
Motors
Ceiling Fan
†
Switching
Module
Claro®
Switch
Claro
Switch
Fan
Control
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
A31