DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
REVISION A
T1M-XX-XX-DH
No OF POSITIONS (PER ROW)
-02 THRU -10
DO NOT
SCALE FROM
THIS PRINT
5.60 .220
REF
TAIL OPTION
-DH: HORIZONTAL
PLATING SPECIFICATION
-T: MATTE TIN CONTACT AND TAIL
-GF: 3µ" GOLD CONTACT AND TAIL
7.55 .297
REF
POSITION 1
INDICATOR
"A" REF
"B" REF
C
PATENT PENDING
"C"
1.00 .039 (TYP)
(TOL NON-ACCUM)
"B"
CL
T1M-XX-DH
01
4.95 .195
REF
C
2.95 .116
REF
1.40 .055 (2 PLCS)
0.30 .012 REF (TYP)
"B"
6.70 .264
REF
3.95 .156
REF
02
FIG 1
0.20 .008 REF (TYP)
WT-36-02-T
T1M-10-XX-DH SHOWN
"D" REF
"E"
C
CL
3.50 .138 REF
0.80 .031
REF
0.60 .024 REF
NOTES:
C
"F"
0.80 .031
REF
"G" REF
1. C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: SIGNAL: 2.22N[.5 LB], WELD TAB: 4.90N[1 LB].
3. PARTS TO BE PACKAGED IN TAPE AND REEL.
FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED.
FOR QUANTITIES OF 50-124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS
ANGLES
X.X: 0.3 [.01]
2
X.XX: 0.13 [.005]
X.XXX: 0.051 [.0020]
MATERIAL:
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
INSULATOR: LCP UL 94-V0; COLOR: NATURAL
TERMINAL: PHOS BRONZE
WELD TAB: PHOS BRONZE
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
1 MM DOUBLE ROW DISCRETE WIRE HEADER
DWG. NO.
T1M-XX-XX-DH
BY: ROY LUO
C:\EnterpriseVault\DWG\MISC\MKTG\T1M-XX-XX-DH-MKT.SLDDRW
06/22/2013
SHEET 1 OF 2
REVISION A
-C-C-
2.50 .098 REF
3.00 .118 REF
0.40 .016 REF (TYP)
T-1M118-01-XX
T-1M118-02-XX
C
1.95±0.15 .077±.006
C
0.05±0.05 .002±.002
(MEAS. BOTH ENDS)
SEE BOTTOM ROW-TAIL DETAIL
SEE TOP ROW-TAIL DETAIL
0.45 .018 REF
C
C
0.10[.004]
TOP ROW, BOTTOM ROW, STANDOFFS
T-1M118-01-XX
C 1.05 .041
(LOCATE ASSY ON DATUM -CFOR MEASUREMENT)
0.50 .020
(TYP) REF
0.75 .030
0.10[.004]
WITHIN ROW
(LOCATE ASSY ON DATUM -CFOR MEASUREMENT)
5.10 .201
C
REF (TYP)
IN-PROCESS 1
(FILL BOTTOM ROW)
C
5.10 .201
C
6.65 .262
-CT-1M118-01-XX
T-1M118-02-XX
SECTION "B"-"B"
SCALE 6 : 1
C
C
0.05±0.05 .002±.002
(BOTTOM ROW)
T-1M118-02-XX
0.00±0.05 .000±.002
(MEAS. BOTH ENDS)
BOTTOM ROW-TAIL DETAIL
C
(LOCATE ASSY ON DATUM -C- FOR MEASUREMENT)
0.10[.004]
WITHIN ROW
(LOCATE ASSY ON DATUM -CFOR MEASUREMENT)
6.65 .262
C
IN-PROCESS 2
(FILL TOP ROW)
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
C
0.00±0.05 .000±.002
(TOP ROW)
DO NOT SCALE DRAWING
TOP ROW-TAIL DETAIL
(LOCATE ASSY ON DATUM -C- FOR MEASUREMENT)
C:\EnterpriseVault\DWG\MISC\MKTG\T1M-XX-XX-DH-MKT.SLDDRW
SHEET SCALE: 6:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
1 MM DOUBLE ROW DISCRETE WIRE HEADER
DWG. NO.
T1M-XX-XX-DH
BY: ROY LUO
06/22/2013
SHEET 2 OF 2