Vantage
Technology
Explosionproof
Connectors
Vantage Technology LLC
Englewood, Colorado USA
Phone 303-761-2121
VantageXP.com
Explosionproof Connectors
for
Hazardous Locations
Third-party certification to North American Divisional
standards and ATEX Zonal standards means Vantage
connectors meet hazardous area safety and installation
requirements throughout the world.
4675 South Windermere Street – Englewood, Colorado 80110 – Ph: 303.761.2121 – FAX: 303.789.4215 – Email: Support@VantageXP.com
Table Of Contents
Page
3
Table of Contents
Company Overview
4
Vantage Product Overview
5
Assurance, Third Party Certificates
6
Explosionproof StarLine
Explosionproof StarLine Features
Power - Victory Series
7
8-9
Motor Minder Electrical Interlock
10
GD Part Numbers
11
GB Part Numbers
12
BM Part Numbers
13
Control - Victory Series
14-15
AF Part Numbers
16-17
Stainless Steel - Millennium Series
18-19
SD Part Number
20
SB Part Numbers
21
SF Part Numbers
22-23
Aircraft and Ground Power
Ground Power Part Numbers
Explosionproof StarLine ATEX Power and Control
Insert and Contact Options
Insert Configurations
24
25
26-27
28
29-36
Environmental Sealing
37
Tooling
38
Dimensions
39-41
Part Number Code Logic
GD, SD and BM Receptacles
42
GD, SD and BM Cable Attachments
43
AF, SF and BM Receptacles
44
AF, SF and BM Cable Attachments
45
Ground Power Receptacle, Single
46
Ground Power Receptacle, Duplex
47
StrateLine
Delayed Action StrateLine
Interlocked StrateLine
48-50
51
Part Number Code Logic
EP and ER
52
YX and PX
53
Engineering Support
54
Applications
55
Vantage Sales Team
56
Page 3
VANTAGE Explosionproof electrical connectors are designed for use in
Hazardous Locations defined by the National Fire Prevention Association
(NFPA) National Electrical Code, Article 500 Hazardous (Classified)
Locations, Classes I, II, and III, Divisions 1 and 2. Vantage is proud to
maintain certifications of that suitability from nationally recognized testing
laboratories, including Underwriters Laboratories, Inc (UL), CSA
International (CSA) and MSHA – Mines Safety and Health Act. Product
nameplates carry relevant listing data, and copies of certifications are
available upon request.
Vantage connectors are certified by CSA-KEMA to the ATEX Directive
94/9/EC, Equipment and Protective systems intended for use in Potentially
Explosive Atmospheres.
Manufactured in Colorado, USA and shipped throughout the world, the
following connector products are offered by Vantage Technology.
No matter what the hazardous
location …
No matter what the
application …
VICTORY SERIES Third Party Certified explosionproof connectors
providing safe and reliable service.
GD and GB
Power
BM
Mining
AF and BM
Control
GD
Ground Power
EP / ER
Power
PX / YX
Power
MILLENNIUM SERIES At the start of the third millennium, Vantage
introduced the first and only stainless steel power connectors certified for
use in Class I, Division 1 areas. Also available in combination nickel
aluminum bronze, these include:
Explosionproof –
Make It / Break It
Safe, Fast and Easy
SB
Power
SD
Power
SF
Control
MISSION At Vantage, our mission is to be the premier manufacturer of
third-party certified explosionproof connectors while providing the best
customer service.
We pride ourselves on having the personnel,
experience and knowledge to meet these goals with
•
•
•
•
•
Technical Service
Reliable Delivery
Engineering Support
Third Party Certification
New Product Development
VANTAGE Explosionproof connectors assure safe, reliable interconnects.
With worldwide service, on land-based facilities or offshore drilling
platforms, in aerospace, petroleum, process manufacturing, chemicals,
mining and other industries, Vantage provides the quality solutions you
demand.
Page 4
Page 5
Vantage has earned a broad range of system and product third party certifications. Our company meets the requirements
of ISO 9001:2000. Quality standard EN13980 augments our system and sets the foundation for the requirements of the
ATEX Directive.
Products throughout this catalog list relevant third party certified ratings. This is your assurance that when you specify
our connectors, they will meet or exceed your requirements.
Quality Policy
Our employees are committed to providing our customers with the safest and most reliable products possible at a level of
service which ensures that the correct product is selected for the customer’s application, is installed correctly, and is
maintained for a long, safe life. We are committed to building lasting relationships with our customers.
Our company wide goal is customer satisfaction, continuous improvement, process management, and employee
involvement to ensure success for our customers and the company.
Quality Certificates
Quality System Certificate
Product Quality Assurance Notification
Quality Standard ISO 9001:2008
Certificate Number:
CERT-03456-2001-AQ-HOU-RAB
Equipment or Components intended for use in
potentially explosive atmospheres Directive 94/9/EC.
Notification Number: DNV-OSL-ATEX-2571Q
Det Norske Veritas
Det Norske Veritas
Product Certificates
CSA International
Underwriters Laboratories
File Number: RROR.E12145
Category Name: Receptacles With Plugs, For Use in
Hazardous Locations




Certification Record Class 6238-01
Class Description: Receptacles and Plugs - For Hazardous Locations


Class I, Group B
Class I, Division 2, Group B
Class I, Group C and D
Class I, Division 2, Groups C and D
Certification Record Class 6238-81
Class Description: Receptacles and Plugs - For Hazardous Locations
Certified to U.S. Standards


File Number: RSPX.E12145
Category Name: Receptacles With Plugs Interlocked
With Switches, For Use in Hazardous Locations



X/P 1570 …Sump Pumps
II 2 GD
Page 6
Class I, Division 1, Group D; Class II, Division 1, Groups F and G
Occupational Safety and Health
Administration
Mine Safety and Health
Administration
CSA International- KEMA
Class I, Groups B, C and D and Class II, Groups F and G
Class I, Division 2, Groups B, C and D and AEx d IIC T6
Certification Record Class 6238-03
Class Description: Receptacles with Switch and Plugs - For Hazardous
Locations. YX and PX Series
Class I, Group C and D
Class II, Groups F and G
Connector Certifications:
X/P 1344 …BM Control
X/P 1344 …BM Power
Class I, Groups B, C and D and Class II, Groups F and G
Class I, Division 2, Groups B, C and D and Ex d IIC T6
Approved use of Vantage BM connectors in
Class II, Group F hazardous areas.
EC Type Examination Certificate Number
KEMA 04ATEX2179 X
EEx d IIC T6 (Receptacles and Plugs)
EEX d IIB +H2 T6 (Ground Power Receptacles)
IP 66/67, T 70°C
The Vantage StarLine Series of explosionproof connectors is offered in a variety of materials and configurations. Product
options and an array of third party listings mean we have a solution for your application. Note, options and features may
vary based on third party listing.
PLUG, ATTACHMENT
RECEPTACLE, JUNCTION BOX
PLUG, TAPPED NPT
RECEPTACLE, NPT
Features
Sealing. All junction box, NPT and panel mount
receptacles are pre-wired and factory sealed eliminating
the need for external seals.
Purged / Pressurized Systems. Factory sealing
makes our receptacles ideal for use with these
technologies.
Options
Covers. Environmental threaded covers are available
with all connectors.
Pigtails. Receptacle leads may be ordered in any
length.
Gender. Connectors can be supplied with reverse
service inserts when lineside power is carried in the
plug to the receptacle.
Keying. Inserts can be keyed for phase and voltage
separation.
Color Coding. Connectors may be ordered in a range
of colors and combinations of color.
Custom Assemblies. Are available to user’s
specifications.
RECEPTACLE, PANEL MOUNT
RECEPTACLE, ATTACHMENT
RECEPTACLE, TAPPED NPT
Victory Series Machined, hard anodized aluminum
GD Power
Page 8
GB Power
Page 8
AF Control
Page 14
BM Power
Page 8
II 2 GD EEx d IIC T6
IP 67 T 70°C
Class I, Groups B, C & D
Class II, Groups F & G
Class I, Groups B, C & D
Class II, Groups F & G
Class I, Groups B, C & D
Class II, Groups F & G
Class I, Groups C & D
Class I, Groups B
Class II, Group F
Millennium Series Stainless steel, alloy 316
SD Power
Page 18
SF Control
Page 18
II 2 GD EEx d IIC T6
IP 67 T 70°C
Class I, Groups B, C & D
Class II, Groups F & G
Class I, Groups B, C & D
Class II, Groups F & G
Page 7
Vantage Technology presents explosionproof connectors designed to UL Standard 1010 and the ATEX Directive. They
are intended for use in areas which are hazardous per the U.S. and Canadian electrical codes and Explosive
Atmospheres per 94/9/EC.
The Victory Series has a proven track record with over 40 years of safe and reliable service. Since its inception, the
Victory connector remains the only third party certified explosionproof connector with a rating over 100 amperes.
Vantage provides circuit-breaking make-and-break connections at up to 200 amperes in a small, environmentally sealed
package. GD, GB and BM connectors features include:
Third Party Certification ... Vantage connectors have been tested and listed for use in
hazardous areas by the following organizations:
UL
Underwriters Laboratories, Inc.
CSA
CSA International
MSHA
Mine Safety - U.S. Bureau of Mines
ATEX
EC Type-Examination Certificate with KEMA
Power Inserts
30, 60, 100 and 200 amp rated for service
through 600 Vac and designed for Class I and II
Areas, per the U.S. and Canadian electrical
codes.
32, 63, 125, and 260 amp rated for service
through 1000 Vac, 500 Vdc and approved to II 2
GD EEx d IIC T6, per 94/9/EC
Circuit-Breaking
UL, CSA and MSHA Listed to make/break at full
rated load, these connectors were required to
pass an overload test of 50 cycles at 150% of
their ampere rating in a chamber filled with a test
mixture of hazardous vapors.
Submersible
Victory and Millennium series connectors are
both explosionproof and submersible! When fully
mated, they will withstand 200 PSI of external as
well as 100 PSI of internal pressure.
400 Amp Connector
Vantage 400 amp XP connectors are electrically
interlocked. The receptacle, with UL / CSA
listed components,
is wired to a
breaker with shunt
trip for enhanced
safety.
Page 8
(See pages 26 and 27 for ATEX details.)
Insert Patterns
Grounding inserts with 3, 4, 5, and 6 contacts are described as 2
Pole 3 Wire, 3 Pole 4 Wire, 4 Pole 5 Wire, and 3 Pole 4 Wire plus
2 relay length contacts. The ground pin is longer and will make
first - break last, an important safety feature. See pages 29-32
for inserts.
Corrosion Resistance
Designed for corrosive environments, junction boxes are sand
cast, copper-free aluminum, protected by our VanGuard baked
polymer finish system. Plug and receptacle shells are machined
from 6061-T6 aluminum (0.15 to 0.40% copper by weight) and
finished by hard anodizing to exceed corrosion resistance
requirements per MIL-STD 202, Method 101, Condition D.
Reverse Service
GB / GD connectors are the first and only explosionproof
connectors to secure both UL and CSA listing with reverse
service inserts. Their ATEX listing also supports reverse service.
This feature provides electrical safety where lineside power is
carried from the plug to a receptacle.
200 Amp Connector
UL, CSA and MSHA listed in what is now recognized as a
landmark achievement by a connector manufacturer.
Factory Sealing
Junction box, NPT and panelmounted receptacles are pre-wired
and factory sealed. No external seals
are required.
Attachment Receptacles
Sometimes called in-line or
cable-mounted,
they
are
available
with
backshell
variations
and
watertight
threaded covers.
With this
design, assemblies can be built
in extension cord fashion.
Panel Mount Receptacles
GB / GD panel-mounted
receptacles are CSA Listed at
30, 60, 100 and 200 amps for
Class I, Division 2 and Class II,
Division 2 areas. These prewired and factory sealed
receptacles are available with
wire leads of any specified
length.
NPT Mount Receptacle
Vantage
developed
NPT
receptacles to thread into
explosionproof enclosures. Prewired and factory sealed, these
CSA Listed receptacles can be
supplied with wire leads of any
length. They are available in
the following sizes:
Shell Size 16 - 1½" NPT
Shell Size 24 - 2½" NPT
Shell Size 20 - 2" NPT
Shell Size 28 - 3" NPT
Flexible Conduit
Attachment
plugs
and
receptacles are available with
backshell hardware for use with
explosionproof, flexible conduit
in Division 1 areas and liquid
tight flexible conduit in Division
2 areas.
Electrical Interlock Switch
Receptacles with junction boxes are available with this
variation, often used as a motor disconnect. The normally
open
switch
is
operated
automatically
by
insertion/withdrawal of the mating plug. Reference Motor
Minder XP Connectors on page 10.
Color Coding
Plugs and receptacles are available with color coding
variations for specific application identification.
This
coding could include the plug coupling nut and cover with
matching colors on various receptacle components.
Cable Assemblies
Vantage connectors are
available as complete
assemblies built to your
specification
and
shipped to any site,
ready-to-install.
Ground Power Receptacles
UL, CSA & ATEX listed Ground
Power receptacles mount flush
into a concrete deck or platform.
Each unit is available with one or
two power receptacles and
various point-of-use controls.
60/400 Hertz listings make them
ideal for use in aircraft hangar
applications.
See page 24 for product details.
Alternate Keyed Inserts
For added safety, inserts can be
keyed in alternate positions to
prevent mating of differing
voltages, frequencies or
services.
Shell Size 16 – 1¼" NPT
Shell Size 20 – 1½" NPT
Shell Size 24 - 2" NPT
Shell Size 28 – 2½" NPT
INSERT GDU-28-31
KEY
NUMBER
KEY
POSITION
N
01
02
03
0°
60°
120°
195°
See Pages:
11-13 and 25 for Part Numbers
42-43, 46-47 for Part Number Code Logic
39-41 for Product Dimensions
PIN NUMBER 4 IS POLARIZED
Page 9
Vantage explosionproof StarLine receptacles can be supplied with an Electrical Interlock Switch,
which is ideal for applications such as motor disconnect and remote signaling.
Wired to a contactor or circuitbreaker with shunt trip, this
variation insures the
connectors will make-break
under a no-load condition.
Engagement and separation
of pins and sockets is
controlled by the snap-action
mechanism incorporated in
Motor Minder XP connectors.
Example P/N: GD-B1720-40SL-AH-94
The 94 suffix calls for an interlocking
switch in a control circuit (24V – 600V) with a
PC, contactor or circuit breaker with a shunt trip
or undervoltage release.
The stainless steel pushbutton
assembly, preinstalled within
enclosure, is supplied with 8" pigtails
for simplified field termination.
Separation Unthreading the coupling
sleeve opens the
interlock switch by
releasing the springloaded actuator, before
pins are withdrawn from
the sockets. Further
rotation controls the
separation of pins from
sockets under a no-load
condition.
Engagement – The snap-action mechanism engages
pins into sockets. An additional 3-4 turns of the
couplings sleeve closes the interlock switch by
depressing the actuator, energizing a fully mated
connection that is sealed against the environment.
Page10
AMPERES
Plug, Attachment 1
Plug, NPT 1,4
Receptacle,
Junction Box
Receptacle, NPT 3
Receptacle,
Panel Mount
Receptacle,
Attachment
Receptacle, NPT 5
1
2 POLE, 3 WIRE
3 POLE, 4 WIRE
4 POLE, 5 WIRE
30
32
GD-1016-51PL-XX
GD-1016-23PL-XX
GD-1020-36PL-XX
60
63
GD-1020-61PL-XX
GD-1020-40PL-XX
GD-1024-29PL-XX
100
125
GD-1024-60PL-XX
GD-1024-39PL-XX
GD-1028-23PL-XX
200
260
GDU-1028-30PL-XX
GDU-1028-31PL-XX
GDT-1028-42PL-XX 2
30
32
GD-1016-51PL-TC
GD-1016-23PL-TC
GD-1020-36PL-TC
60
63
GD-1020-61PL-TC
GD-1020-40PL-TC
GD-1024-29PL-TC
100
125
GD-1024-60PL-TC
GD-1024-39PL-TC
GD-1028-23PL-TC
200
260
GDU-1028-30PL-TC
GDU-1028-31PL-TC
GDT-1028-42PL-TC 2
30
32
GD-B1716-51SL-FH
GD-B1716-23SL- FH
GD-B1720-36SL- FH
60
63
GD-B1720-61SL- FH
GD-B1720-40SL- FH
GD-B1724-29SL-BK
100
125
GD-B1724-60SL-BK
GD-B1724-39SL-BK
GD-B1728-23SL-BL
200
260
GDU-B1728-30SL-BL
GDU-B1728-31SL-BL
GDT-B1728-42SL-BL2
30
32
GD-B1916-51SL-2
GD-B1916-23SL-2
GD-B1920-36SL-2
60
63
GD-B1920-61SL-2
GD-B1920-40SL-2
GD-B1924-29SL-2
100
125
GD-B1924-60SL-2
GD-B1924-39SL-2
GD-B1928-23SL-2
200
260
GDU-B1928-30SL-2
GDU-B1928-31SL-2
GDT-B1928-42SL-2 2
30
32
GD-B1716-51SL-
GD-B1716-23SL-
GD-B1720-36SL-
60
63
GD-B1720-61SL-
GD-B1720-40SL-
GD-B1724-29SL-
100
125
GD-B1724-60SL-
GD-B1724-39SL-
GD-B1728-23SL-
200
260
GDU-B1728-30SL-
GDU-B1728-31SL-
GDT-B1728-42SL-
30
32
GD-B1516-51SL-XX
GD-B1516-23SL-XX
GD-B1520-36SL-XX
60
63
GD-B1520-61SL-XX
GD-B1520-40SL-XX
GD-B1524-29SL-XX
100
125
GD-B1524-60SL-XX
GD-B1524-39SL-XX
GD-B1528-23SL-XX
200
260
GDU-B1528-30SL-XX
GDU-B1528-31SL-XX
GDT-B1528-42SL-XX 2
30
32
GD-B1516-51SL-TC
GD-B1516-23SL-TC
GD-B1520-36SL-TC
60
63
GD-B1520-61SL-TC
GD-B1520-40SL-TC
GD-B1524-29SL-TC
100
125
GD-B1524-60SL-TC
GD-B1524-39SL-TC
GD-B1528-23SL-TC
200
260
GDU-B1528-30SL-TC
GDU-B1528-31SL-TC
GDT-B1528-42SL-TC 2
Covers are standard with all receptacles. For plugs add “D”. EX: GD-D1016
2
This is a 3 pole 4 wire + 2 relay insert.
3
Designed to thread into NPT opening. Shell Size 16 (EX: GD-B1916) into 1.5” NPT, 20 into 2.0”, 24 into 2.5” and 28 into 3.0”
4
Designed to accept NPT conduit. Shell Size 16 (EX: GD-D1016) into 1.25” NPT, 20 into 1.5”, 24 into 2.0” and 28 into 2.5”
5
Designed to accept NPT conduit. Shell Size 16 (EX: GD-B1516) into 1.25” NPT, 20 into 1.5”, 24 into 2.0” and 28 into 2.5”
XX
2
Replace with cable diameter code number from Page 37.

Replace with pigtail length code. EX: L36 calls for 36” pigtails. Standard is 36”.
2
Replace with pigtail length code. EX: L48 calls for 48” pigtails. Standard is 48”.
See Pages 42 and 43 for Part Number Code Logic.
Page 11
AMPERES
Plug, Attachment 1
Plug, NPT 1,3
Receptacle,
Junction Box
Receptacle, NPT 2
Receptacle,
Panel Mount
Receptacle,
Attachment
Receptacle, NPT 4
2 POLE, 3 WIRE
3 POLE, 4 WIRE
4 POLE, 5 WIRE
30
32
GB-1016-51PL-XX
GB-1016-23PL-XX
GB-1020-36PL-XX
60
63
GB-1020-61PL-XX
GB-1020-40PL-XX
GB-1024-29PL-XX
GB-1028-23PL-XX
100
125
GB-1024-60PL-XX
GB-1024-39PL-XX
-
260
GB-1028-30PL-XX
GB-1028-31PL-XX
30
32
GB-1016-51PL-TC
GB-1016-23PL-TC
GB-1020-36PL-TC
60
63
GB-1020-61PL-TC
GB-1020-40PL-TC
GB-1024-29PL-TC
100
125
GB-1024-60PL-TC
GB-1024-39PL-TC
GB-1028-23PL-TC
-
260
GB-1028-30PL-TC
GB-1028-31PL-TC
30
32
GB-B1716-51SL-FH
GB-B1716-23SL- FH
GB-B1720-36SL- FH
60
63
GB-B1720-61SL- FH
GB-B1720-40SL- FH
GB-B1724-29SL-BK
100
125
GB-B1724-60SL-BK
GB-B1724-39SL-BK
GB-B1728-23SL-BL
-
260
GB-B1728-30SL-BL
GB-B1728-31SL-BL
30
32
GB-B1916-51SL-2
GB-B1916-23SL-2
GB-B1920-36SL-2
60
63
GB-B1920-61SL-2
GB-B1920-40SL-2
GB-B1924-29SL-2
100
125
GB-B1924-60SL-2
GB-B1924-39SL-2
GB-B1928-23SL-2
-
260
GB-B1928-30SL-2
GB-B1928-31SL-2
30
32
GB-B1716-51SL-
GB-B1716-23SL-
GB-B1720-36SL-
60
63
GB-B1720-61SL-
GB-B1720-40SL-
GB-B1724-29SL-
100
125
GB-B1724-60SL-
GB-B1724-39SL-
GB-B1728-23SL-
-
260
GB-B1728-30SL-
GB-B1728-31SL-
30
32
GB-B1516-51SL-XX
GB-B1516-23SL-XX
GB-B1520-36SL-XX
60
63
GB-B1520-61SL-XX
GB-B1520-40SL-XX
GB-B1524-29SL-XX
100
125
GB-B1524-60SL-XX
GB-B1524-39SL-XX
GB-B1528-23SL-XX
-
260
GB-B1528-30SL-XX
GB-B1528-31SL-XX
30
60
32
63
GB-B1516-51SL-TC
GB-B1520-61SL-TC
GB-B1516-23SL-TC
GB-B1520-40SL-TC
GB-B1520-36SL-TC
GB-B1524-29SL-TC
100
-
125
260
GB-B1524-60SL-TC
GB-B1528-30SL-TC
GB-B1524-39SL-TC
GB-B1528-31SL-TC
GB-B1528-23SL-TC
1
Covers are standard with all receptacles. For plugs add “D”. EX: GB-D1016
2
Designed to thread into NPT opening. Shell Size 16 (EX: GB-B1916) into1.5” NPT, 20 into 2.0”, 24 into 2.5” and 28 into 3.0”
3
Designed to accept NPT conduit. Shell Size 16 (EX: GB-D1016) into 1.25” NPT, 20 into 1.5”, 24 into 2.0” and 28 into 2.5”
4
XX
Designed to accept NPT conduit. Shell Size 16 (EX: GB-B1516) into 1.25” NPT, 20 into 1.5”, 24 into 2.0” and 28 into 2.5”
Replace with cable diameter code number from Page 37.

Replace with pigtail length code. EX: L36 calls for 36” pigtails. Standard is 36”.
2
Replace with pigtail length code. EX: L48 calls for 48” pigtails. Standard is 48”.
See Pages 42 and 42 for Part Number Code Logic.
Page 12
Plug, Attachment
Receptacle,
Junction Box
Receptacle, NPT 3
Receptacle,
Panel Mount
Receptacle,
Attachment
AMPERES
2 POLE, 3 WIRE
3 POLE, 4 WIRE
4 POLE, 5 WIRE
30
BM-D1016-51PL-XX
BM-D1016-23PL-XX
BM-D1020-36PL-XX
60
BM-D1020-61PL-XX
BM-D1020-40PL-XX
BM-D1024-29PL-XX
100
BM-D1024-60PL-XX
BM-D1024-39PL-XX
BM-D1028-23PL-XX
200
BM-D1028-30PL-XX
BM-D1028-31PL-XX
BM-D1028-42PL-XX 2
30
BM-B1716-51SL- FH
BM-B1716-23SL- FH
BM-B1720-36SL- FH
60
BM-B1720-61SL- FH
BM-B1720-40SL- FH
BM-B1724-29SL-BK
100
BM-B1724-60SL-BK
BM-B1724-39SL-BK
BM-B1728-23SL-BL
200
BM-B1728-30SL-BL
BM-B1728-31SL-BL
BM-B1728-42SL-BL2
30
BM-B1916-51SL-
BM-B1916-23SL-
BM-B1920-36SL-
60
BM-B1920-61SL-
BM-B1920-40SL-
BM-B1924-29SL-
100
BM-B1924-60SL-
BM-B1924-39SL-
BM-B1928-23SL-
200
BM-B1928-30SL-
BM-B1928-31SL-
BM-B1928-42SL- 2
30
BM-B1716-51SL-
BM-B1716-23SL-
BM-B1720-36SL-
60
BM-B1720-61SL-
BM-B1720-40SL-
BM-B1724-29SL-
100
BM-B1724-60SL-
BM-B1724-39SL-
BM-B1728-23SL-
200
BM-B1728-30SL-
BM-B1728-31SL-
BM-B1728-42SL- 2
30
BM-B1516-51SL-XX
BM-B1516-23SL-XX
BM-B1520-36SL-XX
60
BM-B1520-61SL-XX
BM-B1520-40SL-XX
BM-B1524-29SL-XX
100
BM-B1524-60SL-XX
BM-B1524-39SL-XX
BM-B1528-23SL-XX
200
BM-B1528-30SL-XX
BM-B1528-31SL-XX
BM-B1528-42SL-XX 2
1
Covers are standard with all receptacles. For plugs add “D”. EX: BM-D1016
2
This is a 3 pole 4 wire + 2 relay contact insert.
3
XX

Designed to thread into NPT opening. Shell Size 16 (EX: BM-B1916) into 1.5” NPT, 20 into 2.0”, 24 into 2.5” and 28 into 3.0”
Replace with cable diameter code number from page 37.
Replace with pigtail length code. EX: L36 calls for 36” pigtails. Standard is 36”.
See Pages 42 and 43 for Part Number Code Logic.
Consult factory for control configurations of the BM connector.
Page 13
Vantage Technology, the premier manufacturer of Third Party Certified
explosionproof plugs and sockets, is proud to present the AF series of control
connectors. Applying shell hardware from our UL and CSA listed power
connectors, the AF is designed for control applications with inserts using #12, #16
and #18 AWG contacts.
CSA
MSHA
ATEX
CSA International
Mine Safety - U.S. Bureau of Mines
EC Type-Examination Certificate with KEMA
(See page 26-27 for ATEX details.)
Stemming from a U.S. Navy project, Vantage StarLine connectors were expanded to include control inserts for use in
hazardous areas. In a landmark achievement, the AF Series was Listed by Factory Mutual for use in Class I, Division 1,
Groups C-D areas. Then MSHA, previously known as the U.S. Bureau of Mines, certified this connector as an extension
of the BM series for use in coal mining environments. Present listings and features include:
Control Inserts
Multi-pin inserts can be specified for either crimp
or solder termination with contacts whose size
and amp ratings are as follows:
Pin - Socket
#12 AWG / 4.0 mm2
#16 AWG / 1.5 mm2
#18 AWG / .75 mm2
Insert Patterns
With 15 plus inserts having 10 thru 100 contacts the AF
Explosionproof StarLine stands alone as a Class I, Division 1
control connector. Inserts with the highest contact density per
shell size are:
Amps
10
6.5
3.5
20
15
10
Shell 16
Shell 20
Shell 24
61 - #18 AWG contacts
90 - #18 AWG contacts
100 - #16 AWG contacts
Circuit Breaking
AF StarLine CSA and MSHA listed connectors
are circuit breaking, designed and tested to
make/break at full rated load – an added safety
feature.
Corrosion Resistance
Designed for corrosive environments, junction boxes are sand
cast, copper-free aluminum, protected by our VanGuard baked
polymer finish system. Plug and receptacle shells are machined
from 6061T6 aluminum and finished by hard anodizing to exceed
corrosion resistance requirements per MIL-STD 202, Method
101, Condition D.
Submersible
AF
connectors
are
explosionproof
and
submersible! Fully mated, they will withstand 200
PSI external and 100 PSI internal pressure.
Reverse Service
Available with all Victory and Millennium series connectors,
reverse service provides electrical safety where lineside power is
carried from the plug to a receptacle.
Factory Sealing
Junction box, NPT and panel-mount receptacles
are pre-wired and factory sealed. No external
seals or fittings are required.
Voltage
AF Explosionproof StarLine has been tested for service through
250 VAC / 125 VDC circuit breaking; select inserts are rated
480 VAC non-circuit breaking. See pages 16-17 for options.
BM Control Connectors
Vantage offers MSHA certified XP connectors for instrumentation
and control, tested for use in coal dust and methane
atmospheres. Consult factory for options.
Purged / Pressurized Systems
Victory and Millennium series NPT / panel mount receptacles,
with factory sealing and flat gaskets are ideal for this technology.
Page 14
NPT Mount
Vantage
developed
NPT
receptacles
to
thread
into
explosionproof enclosures. Prewired and factory sealed, these
receptacles are available in the
following shell sizes with wire
leads of any specified length.
Shell Size 16
Shell Size 20
Shell Size 24
Shell Size 28
Panel Mount
AF panel mount receptacles with
flat gasket are pre-wired and
factory sealed with pigtails of any
specified length. First used on
NEMA enclosures in Division 2
environments, their use expanded
into
Division
1
purged
/
pressurized systems. To date the
AF stands alone as the only
Division 1 control connector.
1½" NPT
2" NPT
2½" NPT
3" NPT
Attachment Receptacles
Sometimes called in-line or
cable-mounted,
they
are
available
with
backshell
variations
and
watertight
threaded covers.
With this
design, assemblies can be built
in “extension cord” fashion.
Cable Assemblies
Complete cable assemblies and receptacle distribution
boxes are available incorporating Vantage Technology
connectors. Please contact us regarding specification
options.
Electrical Interlock Switch
Receptacles with junction boxes
are available with this variation.
The normally open switch is
operated automatically by
engagement/separation of the
mating plug. Reference
Motor Minder XP Connectors
on page 10.
Color Coding
Plugs and receptacles
are available with color
coding variations for
specific
application
identification.
This
coding could include the
plug coupling nut and
cover with matching
colors
on
various
receptacle components.
Alternate Keying
For added safety, inserts can be keyed in alternate positions to prevent mating of different voltages, frequencies
or services. See pages 29-36 for insert configurations.
KEY
N
02
03
04
05
POSITION
0°
48°
144°
252°
276°
See Pages 16-17 for AF Part Numbers
See Pages 44-45 for AF Part Number Code Logic
See Pages 39-41 for AF Product Dimensions
Page 15
AMPS @ 250 VAC
4
Plug, 2
Attachment
Plug,
Conduit
Receptacle,
Junction Box
2, 3
1
Pin
Quantity
Pin Size
AWG (mm2)
10
#12
(4.0)
10.0
20
AF-1016-681PL-XX
AF-1016-681PL-TC
AF-B1716-681SL-FH
10
#12 G
(4.0)
10.0
20
AF-1016-676PL-XX
AF-1016-676PL-TC
AF-B1716-676SL- FH
19
#12 G
(4.0)
10.0
20
AF-1016-612PL-XX
AF-1016-612PL-TC
AF-B1716-612SL- FH
19
#12
(4.0)
10.0
20
AF-1016-677PL-XX
AF-1016-677PL-TC
AF-B1716-677SL- FH
19
#12
(4.0)
10.0 4
20
AF-1020-676PL-XX
AF-1020-676PL-TC
AF-B1720-676SL- FH
19
#12 G
(4.0)
10.0 4
20
AF-1020-688PL-XX
AF-1020-688PL-TC
AF-B1720-688SL- FH
19
#16
(1.5)
6.5
15
AF-1016-655PL-XX
AF-1016-655PL-TC
AF-B1716-655SL- FH
20
#12
(4.0)
10.0
20
AF-1020-632PL-XX
AF-1020-632PL-TC
AF-B1720-632SL- FH
20
#12 G
(4.0)
10.0
20
AF-1020-687PL-XX
AF-1020-687PL-TC
AF-B1720-687SL- FH
37
#12
(4.0)
10.0
20
AF-1020-686PL-XX
AF-1020-686PL-TC
AF-B1720-686SL- FH
37
#12 G
(4.0)
10.0
20
AF-1020-650PL-XX
AF-1020-650PL-TC
AF-B1720-650SL- FH
37
#16
(1.5)
6.5
15
AF-1016-621PL-XX
AF-1016-621PL-TC
AF-B1716-621SL- FH
55
#18
(.75)
3.5
10
AF-1016-640PL-XX
AF-1016-640PL-TC
AF-B1716-640SL- FH
61
#18
(.75)
3.5
10
AF-1016-633PL-XX
AF-1016-633PL-TC
AF-B1716-633SL- FH
68
#16
(1.5)
6.5
15
AF-1020-613PL-XX
AF-1020-613PL-TC
AF-B1720-613SL- FH
100
#16
(1.5)
5.0
15
AF-1024-613PL-XX
AF-1024-613PL-TC
AF-B1724-613SL-BK
1
2
3
4
XX
G = Insert includes one ground pin.
Covers are standard with all receptacles. For plugs add “D”. EX: AF-D1016
Threads onto NPT conduit. Shell Size 16 (EX: AF-D1016) onto 1.25” NPT, 20 onto 1.5”, 24 onto 2.0” and 28 onto 2.5”
Insert is also rated 480 VAC non-circuit breaking.
Replace with cable diameter code number from Page 37.
 Replace with pigtail length code. EX: L36 calls for 36” pigtails. Standard is 36.
See Pages 44 and 45 for Part Number Code Logic.
Page 16
AMPS @ 250 VAC 3
Receptacle, NPT 2
Receptacle, Panel
Mount
Receptacle,
Attachment
1
Pin
Quantity
Pin Size
AWG (mm2)
10
#12
(4.0)
10.0
20
AF-B1916-681SL-2
AF-B1716-681SL-
AF-B1516-681SL-XX
10
#12 G
(4.0)
10.0
20
AF-B1916-676SL-2
AF-B1716-676SL-
AF-B1516-676SL-XX
19
#12 G
(4.0)
10.0
20
AF-B1916-612SL-2
AF-B1716-612SL-
AF-B1516-612SL-XX
19
#12
(4.0)
10.0
20
AF-B1916-677SL-2
AF-B1716-677SL-
AF-B1516-677SL-XX
19
#12
(4.0)
10.0 3
20
AF-B1920-676SL-2
AF-B1720-676SL-
AF-B1520-676SL-XX
19
#12 G
(4.0)
10.0 3
20
AF-B1920-688SL-2
AF-B1720-688SL-
AF-B1520-688SL-XX
19
#16
(1.5)
6.5
15
AF-B1916-655SL-2
AF-B1716-655SL-
AF-B1516-655SL-XX
20
#12
(4.0)
10.0
20
AF-B1920-632SL-2
AF-B1720-632SL-
AF-B1520-632SL-XX
20
#12 G
(4.0)
10.0
20
AF-B1920-687SL-2
AF-B1720-687SL-
AF-B1520-687SL-XX
37
#12
(4.0)
10.0
20
AF-B1920-686SL-2
AF-B1720-686SL-
AF-B1520-686SL-XX
37
#12 G
(4.0)
10.0
20
AF-B1920-650SL-2
AF-B1720-650SL-
AF-B1520-650SL-XX
37
#16
(1.5)
6.5
15
AF-B1916-621SL-2
AF-B1716-621SL-
AF-B1516-621SL-XX
55
#18
(.75)
3.5
10
AF-B1916-640SL-2
AF-B1716-640SL-
AF-B1516-640SL-XX
61
#18
(.75)
3.5
10
AF-B1916-633SL-2
AF-B1716-633SL-
AF-B1516-633SL-XX
68
#16
(1.5)
6.5
15
AF-B1920-613SL-2
AF-B1720-613SL-
AF-B1520-613SL-XX
100
#16
(1.5)
5.0
15
AF-B1924-613SL-2
AF-B1724-613SL-
AF-B1524-613SL-XX
1 G = Insert includes one ground pin.
2 Threads into NPT opening. Shell Size 16 (EX: AF-B1916) into 1.5” NPT, 20 into 2.0”, 24 into 2.5” and 28 into 3.0”
3 Insert is also rated 480 VAC non-circuit breaking.
XX Replace with cable diameter code number from Page 37.
 Replace with pigtail length code. EX: L36 calls for 36” pigtails. Standard is 36.
2 Replace with pigtail length code. EX: L48 calls for 48” pigtails. Standard is 48.
See Pages 44 and 45 for Part Number Code Logic.
Page 17
At the start of the third millennium, Vantage introduced the first stainless
steel connectors designed for use in Class I and Class II hazardous
areas. Incorporating all of the proven technology in the Victory Series,
this landmark achievement includes CSA and ATEX listing on the
following connectors.
SD, SDU and SDT - Power. 30/32, 60/63, 100/125 and 200/260 amp
with 3, 4, 5 and 6 pin inserts for Class I, Division 1 and Class II, Division
1, Groups B-C-D Divisional areas and EEx d IIC T6 IP 66/67 T 70°C
Zonal areas.
SF – Control. 10 thru 100 contacts, sizes 18 thru 12 AWG (0.75 – 4.0 mm2)
Third Party Certification ... Vantage Millennium Series connectors have been tested and listed for use in hazardous
areas by the following organizations:
CSA International
CSA
ATEX
EC Type-Examination Certificate with KEMA
(See page 26-27 for ATEX details.)
Power and Control Connector Styles
Plug, Attachment
Receptacle, Junction Box
For use with cable or flexible conduit, with standard or Explosionproof sand-cast, copper-free aluminum enclosure
reverse service inserts and environmental covers.
protected by our VanGuard baked polymer finish system, for
added corrosion resistance.
Receptacle, Attachment
For termination to cable or flexible conduit, with
standard or reverse service inserts and environmental
threaded covers.
Receptacle, NPT Style
Designed to thread into drilled and tapped openings in
explosionproof enclosures, these receptacles are pre-wired and
factory sealed with pigtails of any specified length.
Plug, Tapped Conduit
Attachment plugs and receptacles are available with
backshell hardware for use with explosionproof,
flexible conduit in Division 1 areas and Sealtite in
Division 2.
Receptacle, Panel-mount
Designed to mount to a NEMA enclosure for use in Class I,
Division 2 areas, these receptacles are pre-wired and factory
sealed with pigtails of any length to meet your needs.
Power and Control Features
Corrosion Resistance
Designed for corrosive
environments, junction boxes are
sand cast, copper-free aluminum,
protected by our VanGuard
baked polymer finish system.
Plug and receptacle shells are
machined from stainless steel,
alloy 316.
Submersible
Vantage connectors are explosionproof and submersible!
Fully mated, they will withstand 200 PSI of external as well as
100 PSI of internal pressure.
Page 18
Control Connectors
Multi-pin inserts can be crimp or solder terminated.
Connectors have been tested for service through 250
VAC / 125 VDC. Select inserts are rated 480 VAC
non-circuit breaking
Color Coding
Plugs and receptacles are available with color coding
variations for specific application identification. This
coding could include the plug coupling nut and cover
with matching colors on various receptacle components.
Cable Assemblies
Connectors are available as complete assemblies made
to your specification and shipped to any site, ready-toinstall.
Control Inserts
There are over 15 - with as few as 10 and as many as
100 contacts. Grounding and non-grounding types
are available. Multi-pin inserts can be crimp or solder
terminated. Inserts with the highest contact density
per shell size are:
Shell 16
Shell 20
Shell 24
61 - #18 AWG contacts
90 - #18 AWG contacts
100 - #16 AWG contacts
Power Inserts
30/32, 60/63, 100/125 and 200/260 amp rated for service
through 1000 VAC and designed for Class I and II Areas, per
the U.S. and Canadian electrical codes and Zone 1 Areas per
the ATEX Directive.
Shell 16,20,24,28
Shell 16,20,24,28
Shell 16,20,24,28
Shell 28
2 Pole 3 Wire
3 Pole 4 Wire
4 Pole 5 Wire
3 Pole 4 Wire + 2 Relays
Circuit-Breaking
CSA lists the Millennium Series to make/break at full rated load. These connectors were required to pass an overload test
of 50 cycles at 150% of their ampere rating in a chamber filled with a mixture of hazardous vapors. ATEX listings certify a
higher amperage rating because in the CENELEC scheme circuits are not to be made or broken under load.
Amps
Pin – Socket
Wire Size
12 AWG (4.0 mm2)
16 AWG (1.5 mm2)
18 AWG (.75 mm2)
10
6.5
3.5
20
15
10
Amps
Pin – Socket
Wire Size
8 AWG / (10 mm2)
4 AWG / (25 mm2)
1/0 AWG / (55 mm2)
4/0 (120 mm2)
30
60
100
200
32
63
125
260
Voltage
Control connectors tested for service through 250 VAC / 125 VDC, select inserts through 480 VAC non-circuit breaking
Power connectors have been tested for service through 600 VAC (CSA) & 1000 VAC / 500 VDC (KEMA)
Alternate Keyed Inserts
For added safety, inserts can be keyed in alternate positions to prevent mating of
differing voltages, frequencies or services.
KEY
N
01
02
03
04
KEY
N
01
02
03
04
05
POSITION
0°
75°
105°
150°
232°
POSITION
0°
105°
120°
315°
330°
345°
Frequency
Tested at both 60 and 400 hertz. This feature is of paramount importance at airports and aircraft
maintenance facilities around the world. Users include Boeing, Lockheed Martin, McDonnell Douglas,
United, TWA, Delta, Air Canada, El Al and the C5A Military Program.
Contact Plating Options
Control contact plating
options include: silver,
gold over silver and gold
over nickel.
Thermocouple contacts
are also available.
Reverse Service
This feature, available with all connectors, ensures electrical safety
where lineside power is carried from the plug to a receptacle.
Factory Sealing
Junction box, NPT and panel-mounted receptacles are pre-wired
and factory sealed. No external seals are required.
See pages: 20-23 for Part Numbers
42-45 for Part Number Code Logic
39-41 for Product Dimensions
Page 19
AMPERES
Plug, Attachment 1
Receptacle,
Junction Box
Receptacle, NPT 3
Receptacle,
Panel Mount
Receptacle,
Attachment
2 POLE, 3 WIRE
3 POLE, 4 WIRE
4 POLE, 5 WIRE
30
32
SD-1016-51PL-XX
SD-1016-23PL-XX
SD-1020-36PL-XX
60
63
SD-1020-61PL-XX
SD-1020-40PL-XX
SD-1024-29PL-XX
100
125
SD-1024-60PL-XX
SD-1024-39PL-XX
SD-1028-23PL-XX
200
260
SDU-1028-30PL-XX
SDU-1028-31PL-XX
SDT-1028-42PL-XX 2
30
32
SD-B1716-51SL-FH
SD-B1716-23SL- FH
SD-B1720-36SL- FH
60
63
SD-B1720-61SL- FH
SD-B1720-40SL- FH
SD-B1724-29SL-BK
100
125
SD-B1724-60SL-BK
SD-B1724-39SL-BK
SD-B1728-23SL-BL
200
260
SDU-B1728-30SL-BL
SDU-B1728-31SL-BL
SDT-B1728-42SL-BL2
30
32
SD-B1916-51SL-2
SD-B1916-23SL-2
SD-B1920-36SL-2
60
63
SD-B1920-61SL-2
SD-B1920-40SL-2
SD-B1924-29SL-2
100
125
SD-B1924-60SL-2
SD-B1924-39SL-2
SD-B1928-23SL-2
200
260
SDU-B1928-30SL-2
SDU-B1928-31SL-2
SDT-B1928-42SL-2 2
30
32
SD-B1716-51SL-
SD-B1716-23SL-
SD-B1720-36SL-
60
63
SD-B1720-61SL-
SD-B1720-40SL-
SD-B1724-29SL-
100
125
SD-B1724-60SL-
SD-B1724-39SL-
SD-B1728-23SL-
200
260
SDU-B1728-30SL-
SDU-B1728-31SL-
SDT-B1728-42SL- 2
30
32
SD-B1516-51SL-XX
SD-B1516-23SL-XX
SD-B1520-36SL-XX
60
63
SD-B1520-61SL-XX
SD-B1520-40SL-XX
SD-B1524-29SL-XX
100
125
SD-B1524-60SL-XX
SD-B1524-39SL-XX
SD-B1528-23SL-XX
200
260
SDU-B1528-30SL-XX
SDU-B1528-31SL-XX
SDT-B1528-42SL-XX 2
1
Covers are standard with all receptacles. For plugs add “D”. EX: SD-D1016
2
This is a 3 pole 4 wire + 2 relay contact insert.
3
XX
Designed to thread into NPT opening. Shell Size 16 (EX: SD-B1916) into 1.5” NPT, 20 into 2.0”, 24 into 2.5” and 28 into 3.0”
Replace with cable diameter code number from Page 37.

Replace with pigtail length code. EX: L36 calls for 36” pigtails. Standard is 36”.
2
Replace with pigtail length code. EX: L48 calls for 48” pigtails. Standard is 48”.
See Pages 42 and 43 for Part Number Code Logic.
Page 20
AMPERES
Plug, Attachment 1
Receptacle,
Junction Box
Receptacle, NPT 2
Receptacle,
Panel Mount
Receptacle,
Attachment
1
2
XX
2 POLE, 3 WIRE
3 POLE, 4 WIRE
4 POLE, 5 WIRE
30
32
SB-1016-51PL-XX
SB-1016-23PL-XX
SB-1020-36PL-XX
60
63
SB-1020-61PL-XX
SB-1020-40PL-XX
SB-1024-29PL-XX
100
125
SB-1024-60PL-XX
SB-1024-39PL-XX
SB-1028-23PL-XX
-
260
SBU-1028-30PL-XX
SBU-1028-31PL-XX
30
32
SB-B1716-51SL- FH
SB-B1716-23SL- FH
SB-B1720-36SL- FH
60
63
SB-B1720-61SL- FH
SB-B1720-40SL- FH
SB-B1724-29SL-BK
100
125
SB-B1724-60SL-BK
SB-B1724-39SL-BK
SB-B1728-23SL-BL
-
260
SBU-B1728-30SL-BL
SBU-B1728-31SL-BL
30
32
SB-B1916-51SL-2
SB-B1916-23SL-2
SB-B1920-36SL-2
60
63
SB-B1920-61SL-2
SB-B1920-40SL-2
SB-B1924-29SL-2
100
125
SB-B1924-60SL-2
SB-B1924-39SL-2
SB-B1928-23SL-2
-
260
SBU-B1928-30SL-2
SBU-B1928-31SL-2
30
32
SB-B1716-51SL-
SB-B1716-23SL-
SB-B1720-36SL-
60
63
SB-B1720-61SL-
SB-B1720-40SL-
SB-B1724-29SL-
100
125
SB-B1724-60SL-
SB-B1724-39SL-
SB-B1728-23SL-
-
260
SBU-B1728-30SL-
SBU-B1728-31SL-
30
32
SB-B1516-51SL-XX
SB-B1516-23SL-XX
SB-B1520-36SL-XX
60
63
SB-B1520-61SL-XX
SB-B1520-40SL-XX
SB-B1524-29SL-XX
100
125
SB-B1524-60SL-XX
SB-B1524-39SL-XX
SB-B1528-23SL-XX
-
260
SBU-B1528-30SL-XX
SBU-B1528-31SL-XX
Covers are standard with all receptacles. For plugs add “D”. EX: SB-D1016
Designed to thread into NPT opening. Shell Size 16 (EX: SB-B1916) into 1.5” NPT, 20 into 2.0”, 24 into 2.5” and 28 into 3.0”
Replace with cable diameter code number from Page 37.

Replace with pigtail length code. EX: L36 calls for 36” pigtails. Standard is 36”.
2
Replace with pigtail length code. EX: L48 calls for 48” pigtails. Standard is 48”.
See Pages 42 and 43 for Part Number Code Logic.
Page 21
AMPS @ 250 VAC
4
Plug, 2
Attachment
Plug,
Conduit
Receptacle,
Junction Box
2, 3
1
Pin
Quantity
Pin Size
AWG (mm2)
10
#12
(4.0)
10.0
20
SF-1016-681PL-XX
SF-1016-681PL-TC
SF-B1716-681SL-FH
10
#12 G
(4.0)
10.0
20
SF-1016-676PL-XX
SF-1016-676PL-TC
SF-B1716-676SL- FH
19
#12 G
(4.0)
10.0
20
SF-1016-612PL-XX
SF-1016-612PL-TC
SF-B1716-612SL- FH
19
#12
(4.0)
10.0
20
SF-1016-677PL-XX
SF-1016-677PL-TC
SF-B1716-677SL- FH
19
#12
(4.0)
10.0 4
20
SF-1020-676PL-XX
SF-1020-676PL-TC
SF-B1720-676SL- FH
19
#12 G
(4.0)
10.0 4
20
SF-1020-688PL-XX
SF-1020-688PL-TC
SF-B1720-688SL- FH
19
#16
(1.5)
6.5
15
SF-1016-655PL-XX
SF-1016-655PL-TC
SF-B1716-655SL- FH
20
#12
(4.0)
10.0
20
SF-1020-632PL-XX
SF-1020-632PL-TC
SF-B1720-632SL- FH
20
#12 G
(4.0)
10.0
20
SF-1020-687PL-XX
SF-1020-687PL-TC
SF-B1720-687SL- FH
37
#12
(4.0)
10.0
20
SF-1020-686PL-XX
SF-1020-686PL-TC
SF-B1720-686SL- FH
37
#12 G
(4.0)
10.0
20
SF-1020-650PL-XX
SF-1020-650PL-TC
SF-B1720-650SL- FH
37
#16
(1.5)
6.5
15
SF-1016-621PL-XX
SF-1016-621PL-TC
SF-B1716-621SL- FH
55
#18
(.75)
3.5
10
SF-1016-640PL-XX
SF-1016-640PL-TC
SF-B1716-640SL- FH
61
#18
(.75)
3.5
10
SF-1016-633PL-XX
SF-1016-633PL-TC
SF-B1716-633SL- FH
68
#16
(1.5)
6.5
15
SF-1020-613PL-XX
SF-1020-613PL-TC
SF-B1720-613SL- FH
100
#16
(1.5)
5.0
15
SF-1024-613PL-XX
SF-1024-613PL-TC
SF-B1724-613SL-BK
1 G = Insert includes one ground pin.
2 Covers are standard with all receptacles. For plugs add “D”. EX: SF-D1016
3 Threads onto NPT conduit. Shell Size 16 (EX: SF-D1016) onto 1.25” NPT, 20 onto 1.5”, 24 onto 2.0” and 28 onto 2.5”
4 Insert is also rated 480 VAC non-circuit breaking.
XX Replace with cable diameter code number from Page 37.
See Pages 44 and 45 for Part Number Code Logic.
Page 22
AMPS @ 250 VAC 3
Receptacle, NPT 2
Receptacle, Panel
Mount
Receptacle,
Attachment
1
Pin
Quantity
Pin Size
AWG (mm2)
10
#12
(4.0)
10.0
20
SF-B1916-681SL-2
SF-B1716-681SL-
SF-B1516-681SL-XX
10
#12 G
(4.0)
10.0
20
SF-B1916-676SL-2
SF-B1716-676SL-
SF-B1516-676SL-XX
19
#12 G
(4.0)
10.0
20
SF-B1916-612SL-2
SF-B1716-612SL-
SF-B1516-612SL-XX
19
#12
(4.0)
10.0
20
SF-B1916-677SL-2
SF-B1716-677SL-
SF-B1516-677SL-XX
19
#12
(4.0)
10.0 3
20
SF-B1920-676SL-2
SF-B1720-676SL-
SF-B1520-676SL-XX
19
#12 G
(4.0)
10.0 3
20
SF-B1920-688SL-2
SF-B1720-688SL-
SF-B1520-688SL-XX
19
#16
(1.5)
6.5
15
SF-B1916-655SL-2
SF-B1716-655SL-
SF-B1516-655SL-XX
20
#12
(4.0)
10.0
20
SF-B1920-632SL-2
SF-B1720-632SL-
SF-B1520-632SL-XX
20
#12 G
(4.0)
10.0
20
SF-B1920-687SL-2
SF-B1720-687SL-
SF-B1520-687SL-XX
37
#12
(4.0)
10.0
20
SF-B1920-686SL-2
SF-B1720-686SL-
SF-B1520-686SL-XX
37
#12 G
(4.0)
10.0
20
SF-B1920-650SL-2
SF-B1720-650SL-
SF-B1520-650SL-XX
37
#16
(1.5)
6.5
15
SF-B1916-621SL-2
SF-B1716-621SL-
SF-B1516-621SL-XX
55
#18
(.75)
3.5
10
SF-B1916-640SL-2
SF-B1716-640SL-
SF-B1516-640SL-XX
61
#18
(.75)
3.5
10
SF-B1916-633SL-2
SF-B1716-633SL-
SF-B1516-633SL-XX
68
#16
(1.5)
6.5
15
SF-B1920-613SL-2
SF-B1720-613SL-
SF-B1520-613SL-XX
100
#16
(1.5)
5.0
15
SF-B1924-613SL-2
SF-B1724-613SL-
SF-B1524-613SL-XX
1 G = Insert includes one ground pin.
2 Threads into NPT opening. Shell Size 16 (EX: SF-B1916) into 1.5” NPT, 20 into 2.0”, 24 into 2.5” and 28 into 3.0”
3 Insert is also rated 480 VAC non-circuit breaking.
XX Replace with cable diameter code number from Page 37.
 Replace with pigtail length code. EX: L36 calls for 36” pigtails. Standard is 36.
2 Replace with pigtail length code. EX: L48 calls for 48” pigtails. Standard is 48.
See Pages 44 and 45 for Part Number Code Logic.
Page 23
Ground Power Receptacles
Vantage ground power receptacles are designed to mount flush to the concrete floor of a
hangar deck. They are available with single or dual receptacles, as well as push button
switches and indicator lights for point-of-use control. Color coded covers, receptacle options,
and conduit entries are among the many variations available to the user.
Vantage Ground Power connectors meet the world’s most stringent certification requirements.
First tested and listed by Underwriters Laboratories, these ground power units are now also
approved and certified to Class I, Division 1, Groups C & D at 60/400 hertz by CSA International
- Canada and ATEX certified EEx d IIB + H2 T6 by KEMA - The Netherlands.
See page 25 for part numbers and pages 46 and 47 for code logic.
Single receptacle shown.
Available as duplex or with pilot
light and pushbutton station.
Aircraft Connectors – GDT Series
The GDT Series is the explosionproof companion of the MS25486 auxiliary power
connector, the 400 hertz aircraft power standard throughout the world. With GDT,
disconnects can be established in hazardous locations on hanger floors and walls.
GDT connectors were first incorporated into aircraft hangar facilities with the
introduction of large commercial / military aircraft in the late sixties. The U.S. Air
Force, after months of competition, selected the GD Series as the electrical
connector standard for all C5A hangar facilities throughout the world. The Boeing
Company followed selecting the GDU as part of their 747 assembly facility.
Ground Power Receptacles, shown above, are UL and CSA Listed in single and
duplex styles that mount flush into an aircraft hangar floor or apron.
Frequency In a landmark achievement these receptacles are Division 1 and Zone 1 certified at
50, 60 and 400 hertz.
Drainage A unique drainage feature has two large 2” threaded holes located at opposite sides of
the power box upper skirt. Use of these holes allows water that might pool on the receptacle to
flow through the drainage conduits.
Junction Box GDT-B1728-42SL-BL for Division 1 areas. Receptacles are pre-wired and factory
sealed, external seals are not required. Junction box has a 3" NPT conduit opening on the
bottom for bulkhead or service pit mounting.
Division 2 Panel Mount
Receptacle with enclosure
Interlocked Receptacle V-70017-XX-200A. 200 amp interlocked connector available with
contactor (RC) or circuit breaker (RB) with shunt trip. Designed to be mounted to a bulkhead /
wall, this enclosure is supplied complete and ready to install.
Panel Mount Receptacle GDT-B1728-42SL-L36. Pre-wired and factory sealed, these receptacles are designed for
NEMA style enclosures in Division 2 areas. Pigtails (L36) can be any length. Example: L36 calls for 3 foot (36") pigtails.
NPT Mount GDT-B1928-42SL-L48. Pre-wired and factory sealed, these receptacles thread into
an NPT conduit opening on an explosionproof junction box for use in Division 1 areas. Pigtails
(L48) can be any length. Example: L48 calls for 4 foot (48") pigtails.
Attachment Receptacle GDT-B1528-42SL-XX Receptacles, which can be mounted to flexible
cables, allow assemblies to be built in “extension cord” fashion for use in hazardous areas.
Delta Airlines at Hartsfield International Airport chose to use these attachment receptacles with
large power operated reels mounted in the hangar ceiling. Controlled by conveniently located
pushbutton stations, these receptacles can be lowered to the hangar floor thereby eliminating
excess cable in the workplace.
Page 24
Overhead
Attachment Receptacle
SINGLE RECEPTACLE
GDS - D5L1 - 92ANMEQP
Of the many available variations we selected above example:
GD = Class I, Division 1,Groups C-D;
S = Red/Amber pilot lights and on/off switches;
D5L1 = 200/260 amp, 5P 6W, 60/400 hertz keyed in the 01 position;
92 = single;
ANM = Side A - 3.0" and 2.5";
EQP = Side E – 4.0" and 3.5".
GROUND POWER
COVER
For additional part numbers see Single code logic on page 46.
Mating plugs are listed on page 43.
DUPLEX RECEPTACLE
GD - A1B3 - 93B68DMN
PILOT LIGHT
RED/GREEN
There are hundreds of variations and we selected the above example:
GD = Class I, Division 1, Groups C-D;
A1 = 30/32 amp, 2P 3W, 60/400 hertz;
B3 = 60/63 amp, 3P 4W, 60/400 hertz;
93 = duplex;
B68 = Side B - 1.0" and 1.5";
DMN = Side D - 2.5" and 3.0".
PUSHBUTTON
STATION
For additional part numbers see Duplex code logic on page 47.
Mating plugs are listed on page 43.
INTERMEDIATE
COVER
AMPS
Insert
600/1000 VAC,
60/400 Hz
2 Pole 3 Wire
RECEPTACLE
30
POWER BOX
60
SINGLE
100
32
63
125
2X RECEPTACLE
INTERMEDIATE
COVER
200
260
Insert
Symbol
Receptacle
Assembly
A1
GD-1716-51SL-L36
A2
GD-1716-23SL-L36
3 Pole 4 Wire
4 Pole 5 Wire
B1
GD-1720-36SL-L36
2 Pole 3 Wire
B2
GD-1720-61SL-L36
3 Pole 4 Wire
B3
GD-1720-40SL-L36
4 Pole 5 Wire
C1
GD-1724-29SL-L36
2 Pole 3 Wire
C2
GD-1724-60SL-L36
3 Pole 4 Wire
C3
GD-1724-39SL-L36
4 Pole 5 Wire
D1
GD-1728-23SL-L36
2 Pole 3 Wire
D3
GD-1728-30SL-L36
3 Pole 4 Wire
D4
GDU-1728-31SL-L36
5 Pole 6 Wire
D5
GDT-1728-42SL-L36
See pages 46 and 47 for part number code logic
and conduit size and location options.
4" MAX CONDUIT SIZE
POWER BOX
SIDE "D"
SIDE "A"
USE LETTER O IF BOTTOM
NPT OPENING OMITTED.
EXAMPLE AOM.
SIDE "C"
SIDE "B"
DUPLEX
BOTTOM VIEW
SIDE VIEW
MAX DIA OF SECOND
CONDUIT TAP IN SIDE
WALL IS 2 1/2"
Page 25
Vantage StarLine connectors carry ATEX certification. Conformance to both IEC/CENELEC and NEC standards assure
you of protection no matter what installation regulations are required. Look for the Ex epsilon logo throughout this catalog
to guide you to the right StarLine product for your application.
Certificates
Product Quality Assurance Notification
EC-Type Examination
Equipment or Components intended for use in potentially
explosive atmospheres. Directive 94/9/EC.
Notification Number: DNV-OSL-ATEX-2571Q
Equipment or Components intended for use in potentially
explosive atmospheres. Directive 94/9/EC.
Certificate Number: KEMA 04ATEX2179 X
Equipment Marking
Receptacles and Plugs
Series GB, GD, GDT, GDU
Series SB, SD, SDT, SDU
Series AF
Series SF
Series EMR
Single and Duplex Ground Power Receptacles
Electrical Ratings
GB, GD, GDT, GDU
SB, SD, SDT, SDU
AF
SF
EMR
Single and Duplex
Ground Power
Receptacles
Attachment Connectors
Page 26
Wire Size
mm2
AWG
0.75
18
AMP
Rating
Voltage Rating
AC / DC
Available Configurations
(See pages 29 – 36)
10
250 / 125
55 to 61 Contacts
1.5
16
15
250 / 125
19 to 100 Contacts
4
12
20
250 / 125
10 to 37 Contacts
10
8
32
1000 / 500
2P3W, 3P4W, 4P5W
25
4
63
1000 / 500
2P3W, 3P4W, 4P5W
55
1/0
125
1000 / 500
2P3W, 3P4W, 4P5W
2P3W, 3P4W, 4P5W
120
4/0
260
1000 / 500
3P4W + 2 Relays
ATEX amp ratings are calculated under a non circuit breaking scenario. Do not
make or break connectors under load.
Enclosure Mount Receptacles
Vantage EMR Series packages our EEx
power and control receptacle(s) into EEx e
certified enclosures. Our receptacles are
factory mounted to properly sized EEx e
enclosures and the wire leads landed to
EEx e terminals. Receptacles are available
with straight or angled mounting. Gland
openings and glands can be provided on
request.
Other options include control
buttons (including: push, selector switch,
mushroom push, stop, and key switch), pilot
lights and zener barriers. Consult our sales
group with your requirements.
Factory Terminated
Our full range of power and control
receptacles are available with the EMR
Series.
Pages 29-36 depict the insert
patterns you can choose from.
Specify
Victory standard hard coated aluminum or
Millennium stainless steel shells; enclosure
material is to your specification.
Junction Box Receptacles
When our receptacles
are mounted to
Vantage flameproof
junction boxes, power
and control is available
in a compact EEx d
package.
Designed for corrosive
environments, junction
boxes are sand cast,
copper-free aluminum,
protected by our
VanGuard baked
polymer finish system.
Page 27
Inserts
Vantage inserts come in power (30 thru 260 AMP) and control (10 thru 100 contacts) versions. Within these power and
control versions many options are available. Pages 29 thru 36 depict the inserts available with their electrical ratings,
certifications and available key positions. Inserts are designed for simplified field termination. Power inserts feature
captive contacts that utilize pressure termination. Control inserts utilize crimp contacts that are rear insertable, rear
removable. Consult factory for replacements.
Grounding
Power inserts feature ground contacts which provide shell
grounding, polarization, and make-first, break last function.
Many control inserts feature ground contacts which provide
shell grounding and make-first, break last function.
Relay Circuits
Some inserts are available with a pair of relay
contacts that are shorter than all other contacts to
provide a time delay during breaking and making.
CONTROL CONTACTS
CRIMP TERMINATION, REAR INSERTABLE - REAR REMOVABLE
POWER CONTACTS
PRESSURE TERMINATION, NON-REMOVABLE
GROUND PIN
LINE PIN
LINE PIN
0.125 [3.2mm]
0.125 [3.2mm]
RELAY PIN
0.125 [3.2mm]
GROUND PIN
(POLARIZED)
Plating Options
Control contacts come standard with silver plating. Gold plating is available for
added corrosion resistance. The following plating options are available.
Ferrules
Ferrules are designed to serve as a
compression supporting member when an
undersized wire is crimp terminated into a
larger contact. Ferrules are gold plated.
Symbol
L
K
D
Contact Size AWG (mm2)
Pin or Socket
Part Number
Ferrule Size
Finish
Silver
Gold over Silver
Gold over Nickel
10 (6)
12 (4)
VT-70065-1012K
12
VT-70065-1014K
14
VT-70065-1016K
16
VT-70065-1216K
16
VT-70065-1218K
18
VT-70065-1220K
20
VT-70065-1620K
VT-70065-1622K
Example: To transition From #12 contact to #20 wire,
use V-70065-1220K.
16 (1.5)
20
22
Thermocouple Contacts
AF / SF inserts with 16 AWG contacts can be ordered with thermocouple contacts.
Part Number / Gender
VT-4016-50MF / Pin
VT-4116-50MF / Socket
VT-4016-50NF / Pin
VT-4116-50NF / Socket
VT-4016-50PO / Pin
VT-4116-50PO / Socket
VT-4016-50RO / Pin
VT-4116-50RO / Socket
ISA
Symbol
J
J
J
J
K
K
K
K
Thermocouple
Material
ISA Color Coding
(+)
(-)
Jacket
Temperature Range
Degrees Continuous
Short Time
Iron
White
Red
Black
0-1100° C
to 1100° C
Yellow
Red
Yellow
0-1100° C
to 1350° C
Constantan
Chromel
Alumel
Note: Iron and Alumel contacts are magnetic. Constantan and Chromel contacts are non-magnetic.
Termination Information
All inserts are designed for simplified field termination. Control inserts require the use of Vantage crimp tools for safe
and reliable circuits. See page 38 for more information.
Page 28
The Vantage Inserts presented in this section illustrate the contact configurations available in the StarLine
series. Most inserts are available in alternate key positions to prevent the inter-mating of like configurations in your
system. Power inserts (GD/SD, GB/SB & BM) are designed with oversized contacts to maximize cooling. Wire size
indicates maximize wire gauge that can be terminated to contact.
3 Contacts
Insert Reference
Pins: GB / GD-16-51PL
Sockets: GB / GD-16-51SL
Contact
Quantity
3
Contact AWG
(mm2)
4 (25)
1000 VAC 50/60/400Hz
Non-Circuit Breaking
32 AMP
600 VAC 60/400Hz
Circuit Breaking
30 AMP
480 VAC 60/400Hz
Circuit Breaking
30 AMP
Wire AWG
2
(mm )
8 (10)
KEY
N
01
02
03
04
05
06
07
Shell Size
16
POSITION
0°
40°
90°
140°
180°
210°
280°
320°
3 Contacts
Insert Reference
Pins: GB / GD-20-61PL
Sockets: GB / GD-20-61SL
Contact
Quantity
3
Contact AWG
2
(mm )
1/0 (55)
1000 VAC 50/60/400Hz
Non-Circuit Breaking
63 AMP
600 VAC 60/400Hz
Circuit Breaking
60 AMP
480 VAC 60/400Hz
Circuit Breaking
60 AMP
Wire AWG
2
(mm )
Shell Size
4 (25)
20
KEY
N
01
02
03
04
05
06
07
POSITION
0°
40°
90°
140°
180°
210°
280°
320°
3 Contacts
Insert Reference
Pins: GB / GD-24-60PL
Sockets: GB / GD-24-60SL
Contact
Quantity
Contact AWG
(mm2)
Wire AWG
(mm2)
Shell Size
3
4/0 (120)
1/0 (55)
24
1000 VAC 50/60/400Hz
Non-Circuit Breaking
125 AMP
600 VAC 60/400Hz
Circuit Breaking
100 AMP
480 VAC 60/400Hz
Circuit Breaking
100 AMP
KEY
N
01
02
03
04
05
06
07
POSITION
0°
40°
90°
140°
180°
210°
280°
320°
Page 29
3 Contacts
Insert Reference
Pins: GB / GD-28-30PL
Sockets: GB / GD-28-30SL
Contact
Quantity
3
Contact AWG
(mm2)
350 MCM
(185)
1000 VAC 50/60/400Hz
Non-Circuit Breaking
260 AMP
600 VAC 60/400Hz
Circuit Breaking
200 AMP
480 VAC 60/400Hz
Circuit Breaking
200 AMP
GB not UL or CSA listed.
Wire AWG
(mm2)
Shell Size
4/0 (120)
28
KEY
N
01
02
03
04
05
06
07
08
09
10
POSITION
0°
30°
60°
90°
120°
150°
180°
210°
270°
300°
330°
4 Contacts
Insert Reference
Pins: GB / GD-16-23PL
Sockets: GB / GD-16-23SL
Contact
Quantity
Contact AWG
(mm2)
Wire AWG
(mm2)
Shell Size
4
4 (25)
8 (10)
16
1000 VAC 50/60/400Hz
Non-Circuit Breaking
32 AMP
600 VAC 60/400Hz
Circuit Breaking
30 AMP
480 VAC 60/400Hz
Circuit Breaking
30 AMP
KEY
N
01
02
03
04
05
POSITION
0°
105°
120°
315°
330°
345°
4 Contacts
Insert Reference
Pins: GB / GD-20-40PL
Sockets: GB / GD-20-40SL
Contact
Quantity
Contact AWG
(mm2)
Wire AWG
(mm2)
Shell Size
4
1/0 (55)
4 (25)
20
1000 VAC 50/60/400Hz
Non-Circuit Breaking
63 AMP
600 VAC 60/400Hz
Circuit Breaking
60 AMP
480 VAC 60/400Hz
Circuit Breaking
60 AMP
KEY
N
01
02
03
04
POSITION
0°
15°
165°
300°
330°
4 Contacts
Contact AWG
2
(mm )
4/0 (120)
Wire AWG
2
(mm )
1/0 (55)
1000 VAC 50/60/400Hz
Non-Circuit Breaking
125 AMP
600 VAC 60/400Hz
Circuit Breaking
100 AMP
480 VAC 60/400Hz
Circuit Breaking
100 AMP
KEY
N
01
02
03
04
05
Insert Reference
Pins: GB / GD-24-39PL
Sockets: GB / GD-24-39SL
Page 30
Contact
Quantity
4
Shell Size
24
POSITION
0°
15°
165°
300°
315°
330°
4 Contacts
Insert Reference
Pins: GDU-28-31PL
Sockets: GDU-28-31SL
Contact
Quantity
4
1000 VAC 50/60/400Hz
Non-Circuit Breaking
Contact AWG Wire AWG
Shell Size
(mm2)
(mm2)
350 MCM
4/0 (120)
28
(185)
260 AMP
600 VAC 60/400Hz
Circuit Breaking
200 AMP
480 VAC 60/400Hz
Circuit Breaking
200 AMP
KEY
N
01
02
03
POSITION
0°
60°
120°
195°
5 Contacts
Insert Reference
Pins: GB / GD-20-36PL
Sockets: GB / GD-20-36SL
Contact
Quantity
5
1000 VAC 50/60/400Hz
Non-Circuit Breaking
Contact AWG Wire AWG
(mm2)
(mm2)
4 (25)
8 (10)
Shell Size
20
32 AMP
600 VAC 60/400Hz
Circuit Breaking
30 AMP
480 VAC 60/400Hz
Circuit Breaking
30 AMP
KEY
N
01
02
POSITION
0°
51°
159°
5 Contacts
Insert Reference
Pins: GB / GD-24-29PL
Sockets: GB / GD-24-29SL
Contact
Quantity
5
Contact AWG Wire AWG
(mm2)
(mm2)
1/0 (55)
1000 VAC 50/60/400Hz
Non-Circuit Breaking
63 AMP
600 VAC 60/400Hz
Circuit Breaking
60 AMP
480 VAC 60/400Hz
Circuit Breaking
60 AMP
4 (25)
KEY
N
01
02
03
Shell Size
24
POSITION
0°
36°
90°
198°
Page 31
5 Contacts
Insert Reference
Pins: GB / GD-28-23PL
Sockets: GB / GD-28-23SL
Contact Contact AWG Wire AWG
(mm2)
Quantity
(mm2)
5
4/0 (120)
1000 VAC 50/60/400Hz
Non-Circuit Breaking
Shell Size
1/0 (55)
28
125 AMP
600 VAC 60/400Hz
Circuit Breaking
100 AMP
480 VAC 60/400Hz
Circuit Breaking
100 AMP
KEY
N
01
02
03
POSITION
0°
90°
126°
180°
6 Contacts
Insert Reference
Pins: GD-28-42PL
Sockets: GD-28-42SL
NOTE: Relay pins 5 & 6 are shorter
to make last / break first
Contact Contact AWG Wire AWG
(mm2)
Quantity
(mm2)
4
4/0 (120)
4/0 (120)
2
10 (6)
10 (6)
1000 VAC 50/60/400Hz
Non-Circuit Breaking
260 AMP
600 VAC 60/400Hz
Circuit Breaking
200 AMP
480 VAC 60/400Hz
Circuit Breaking
200 AMP
KEY
N
01
02
03
04
05
06
07
08
09
10
Shell Size
28
POSITION
0°
45°
67.5°
90°
126°
145°
180°
202.5°
225°
315°
337.5°
10 Contacts
Insert Reference
Pins: VT-16-681PL
Sockets: VT-16-681SL
Contact
Quantity
6
4
Contact AWG
2
(mm )
12 (4.0)
10 (6.0)
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20/30 AMP
250 VAC 60Hz
Circuit Breaking
10 AMP
KEY
N
01
02
Shell Size
16
POSITION
0°
30°
45°
10 Contacts
Insert Reference
Pins: VT-16-676PL
Sockets: VT-16-676SL
Page 32
Contact
Quantity
6
Contact AWG
(mm2)
12 (4.0)
4
10 (6.0)
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20/30 AMP
250 VAC 60Hz
Circuit Breaking
10 AMP
KEY
N
01
Shell Size
16
POSITION
0°
35°
19 Contacts
Insert Reference
Pins: VT-16-612PL
Sockets: VT-16-612SL
Contact Quantity
Contact AWG
(mm2)
Shell Size
19
12 (4)
16
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20 AMP
250 VAC 60Hz
Circuit Breaking
10 AMP
KEY
N
02
03
POSITION
0°
48°
144°
19 Contacts
Insert Reference
Pins: VT-16-677PL
Sockets: VT-16-677SL
Contact Quantity
Contact AWG
(mm2)
Shell Size
19
12 (4)
16
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20 AMP
250 VAC 60Hz
Circuit Breaking
10 AMP
KEY
N
01
POSITION
0°
24°
19 Contacts
Insert Reference
Pins: VT-20-676PL
Sockets: VT-20-676SL
Contact Quantity
Contact AWG
(mm2)
Shell Size
19
12 (4)
20
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20 AMP
480 VAC Non-Circuit Breaking
250 VAC Circuit Breaking 60Hz
10 AMP
KEY
N
01
02
04
05
POSITION
0°
37°
84°
165°
235°
19 Contacts
Insert Reference
Pins: VT-20-688PL
Sockets: VT-20-688SL
Contact
Quantity
19
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20 AMP
480 VAC Non-Circuit Breaking
250 VAC Circuit Breaking 60Hz
10 AMP
Contact AWG
(mm2)
12 (4)
KEY
N
Shell Size
20
POSITION
0°
Page 33
19 Contacts
Insert Reference
Pins: VT-16-655PL
Sockets: VT-16-655SL
Contact
Quantity
Contact AWG
(mm2)
Shell Size
19
16 (1.5)
16
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
15 AMP
250 VAC 60Hz
Circuit Breaking
6.5 AMP
KEY
N
01
02
03
04
05
06
07
08
09
POSITION
0°
36°
72°
108°
144°
180°
216°
252°
288°
324°
20 Contacts
Insert Reference
Pins: VT-20-632PL
Sockets: VT-20-632SL
Contact Quantity
Contact AWG
(mm2)
Shell Size
20
12 (4)
20
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20 AMP
250 VAC 60Hz
Circuit Breaking
10 AMP
KEY
N
01
POSITION
0°
42.5
20 Contacts
Insert Reference
Pins: VT-20-687PL
Sockets: VT-20-687SL
Contact Quantity
Contact AWG
(mm2)
Shell Size
20
12 (4)
20
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20 AMP
250 VAC 60Hz
Circuit Breaking
10 AMP
KEY
N
01
POSITION
0°
56°
37 Contacts
Insert Reference
Pins: VT-20-686PL
Sockets: VT-20-686SL
Page 34
Contact Quantity
Contact AWG
(mm2)
Shell Size
37
12 (4)
20
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20 AMP
250 VAC 60Hz
Circuit Breaking
10 AMP
KEY
N
POSITION
0°
37 Contacts
Insert Reference
Pins: VT-20-650PL
Sockets: VT-20-650SL
Contact Quantity
Contact AWG
(mm2)
Shell Size
37
12 (4)
20
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
20 AMP
250 VAC 60Hz
Circuit Breaking
10 AMP
KEY
N
01
02
POSITION
0°
30°
100°
37 Contacts
Insert Reference
Pins: VT-16-621PL
Sockets: VT-16-621SL
Contact
Quantity
Contact AWG
(mm2)
Shell Size
37
16 (1.5)
16
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
15 AMP
250 VAC 60Hz
Circuit Breaking
6.5 AMP
KEY
N
01
02
03
04
05
06
07
08
09
POSITION
0°
32.5°
65°
97.5°
130°
162.5°
195°
227.5°
260°
292.5°
55 Contacts
Insert Reference
Pins: VT-16-640PL
Sockets: VT-16-640SL
Contact
Quantity
Contact AWG
(mm2)
Shell Size
55
18 (0.75)
16
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
10 AMP
250 VAC 60Hz
Circuit Breaking
3.5 AMP
KEY
N
01
02
03
04
05
06
07
08
09
10
POSITION
0°
32°
60°
90°
117°
150°
180°
220°
255°
285°
345°
Page 35
61 Contacts
Insert Reference
Pins: VT-16-633PL
Sockets: VT-16-633SL
Contact Quantity
Contact AWG
2
(mm )
Shell Size
61
18 (.75)
16
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
10 AMP
250 VAC 60Hz
Circuit Breaking
3.5 AMP
KEY
N
01
02
03
04
POSITION
0°
75°
105°
150°
232.5°
68 Contacts
Insert Reference
Pins: VT-20-613PL
Sockets: VT-20-613SL
Contact Quantity
Contact AWG
2
(mm )
Shell Size
68
16 (1.5)
20
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
15 AMP
250 VAC 60Hz
Circuit Breaking
6.5 AMP
KEY
N
02
03
04
05
POSITION
0°
45°
157.5°
228°
292.5°
100 Contacts
Insert Reference
Pins: VT-24-613PL
Sockets: VT-24-613SL
Page 36
Contact
Quantity
Contact AWG
2
(mm )
Shell Size
100
16 (1.5)
24
250 VAC 50/60/400Hz,
125 VDC
Non-Circuit Breaking
15 AMP
250 VAC 60Hz
Circuit Breaking
5.0 AMP
KEY
N
02
03
04
05
POSITION
0°
30°
90°
240°
300°
ØA
ØB
WASHER
Shell Size
Dim B
Inches
(mm)
16
1 23/32
(43.7)
ØB
ØA
20
2 7/32
(56.4)
MIN.
MAX.
Cable
Diameter
Code
Number*
.250 (6.35)
.375 (9.53)
.375 (9.53)
.500 (12.7)
06
08
VT-6316-6C
VT-6316-8C
VT-8016-8E
VT-5016-6E
VT-5016-8E
.500 (12.7)
.625 (15.9)
.625 (15.9)
.750 (19.1)
10
12
VT-6316-10C
VT-6316-12C
VT-8016-12E
VT-5016-10E
VT-5016-12E
.750 (19.1)
.875 (22.2)
.875 (22.2)
1.000 (25.4)
14
16
VT-6316-14C
VT-6316-16C
VT-8016-16E
VT-5016-14E
VT-5016-16E
1.000 (25.4)
1.125 (28.6)
1.125 (28.6)
1.250 (31.8)
18
20
VT-6316-18C
VT-6316-20C
VT-8016-20E
VT-5016-18E
VT-5016-20E
1.250 (31.8)
1.375 (34.9)
1.375 (34.9)
1.437 (36.5)
22
23
VT-6316-22C
VT-6316-23C
VT-8016-23E
VT-5016-22E
VT-5016-23E
.500 (12.7)
.625 (15.9)
.625 (15.9)
.750 (19.1)
10
12
VT-6320-10C
VT-6320-12C
VT-8020-12E
VT-5020-10E
VT-5020-12E
.750 (19.1)
.875 (22.2)
.875 (22.2)
1.000 (25.4)
14
16
VT-6320-14C
VT-6320-16C
VT-8020-16E
VT-5020-14E
VT-5020-16E
1.000 (25.4)
1.125 (28.6)
1.125 (28.6)
1.250 (31.8)
18
20
VT-6320-18C
VT-6320-20C
VT-8020-20E
VT-5020-18E
VT-5020-20E
1.250 (31.8)
1.375 (34.9)
1.375 (34.9)
1.500 (38.1)
22
24
VT-6320-22C
VT-6320-24C
VT-8020-24E
VT-5020-22E
VT-5020-24E
1.500 (38.1)
1.625 (41.3)
1.625 (41.3)
1.750 (44.5)
26
28
VT-6320-26C
VT-6320-28C
VT-8020-28E
VT-5020-26E
VT-5020-28E
1.750 (44.5)
1.875 (47.6)
1.875 (47.6)
1.937 (49.2)
30
31
VT-6320-30C
VT-6320-31C
VT-8020-31E
VT-5020-30E
VT-5020-31E
.875 (22.2)
1.000 (25.4)
16
VT-6324-16C
VT-8024-16E
VT-5024-16E
1.000 (25.4)
1.125 (28.6)
1.125 (28.6)
1.250 (31.8)
18
20
VT-6324-18C
VT-6324-20C
VT-8024-20E
VT-5024-18E
VT-5024-20E
1.250 (31.8)
1.375 (34.9)
1.375 (34.9)
1.500 (38.1)
22
24
VT-6324-22C
VT-6324-24C
VT-8024-24E
VT-5024-22E
VT-5024-24E
1.500 (38.1)
1.625 (41.3)
1.625 (41.3)
1.750 (44.5)
26
28
VT-6324-26C
VT-6324-28C
VT-8024-28E
VT-5024-26E
VT-5024-28E
1.750 (44.5)
1.875 (47.6)
1.875 (47.6)
2.000 (50.8)
30
32
VT-6324-30C
VT-6324-32C
VT-8024-32E
VT-5024-30E
VT-5024-32E
2.000 (50.8)
2.125 (54.0)
2.125 (54.0)
2.250 (57.2)
34
36
VT-6324-34C
VT-6324-36C
VT-8024-36E
VT-5024-34E
VT-5024-36E
2.250 (57.2)
2.375 (60.3)
2.375 (60.3)
2.437 (61.9)
38
39
VT-6324-38C
VT-6324-39C
VT-8024-39E
VT-5024-38E
VT-5024-39E
1.375 (34.9)
1.500 (38.1)
24
VT-6328-24C
VT-8028-24E
VT-5028-24E
1.500 (38.1)
1.625 (41.3)
1.625 (41.3)
1.750 (44.5)
26
28
VT-6328-26C
VT-6328-28C
VT-8028-28E
VT-5028-26E
VT-5028-28E
1.750 (44.5)
1.875 (47.6)
1.875 (47.6)
2.000 (50.8)
30
32
VT-6328-30C
VT-6328-32C
VT-8028-32E
VT-5028-30E
VT-5028-32E
2.000 (50.8)
2.125 (54.0)
2.125 (54.0)
2.250 (57.2)
34
36
VT-6328-34C
VT-6328-36C
VT-8028-36E
VT-5028-34E
VT-5028-36E
2.250 (57.2)
2.375 (60.3)
2.375 (60.3)
2.500 (63.5)
38
40
VT-6328-38C
VT-6328-40C
VT-8028-40E
VT-5028-38E
VT-5028-40E
2.500 (63.5)
2.625 (66.7)
2.625 (66.7)
2.750 (68.9)
42
44
VT-6328-42C
VT-6328-44C
VT-8028-44E
VT-5028-42E
VT-5028-44E
2.750 (68.9)
2.875 (73.0)
46
VT-6328-46C
VT-8028-46E
VT-5028-46E
Cable Diameter Dimension A
Inches (mm)
Grommet
Part Number
Washer
Part Number
Basket Weave
Grip
Part Number
BASKET WEAVE GRIP
ØB
ØA
24
2 23/32
(69.1)
GROMMET
Specialty grommets
are available for
multi-hole and flat
cable systems.
Consult factory.
28
3 5/32
(80.2)
*The cable diameter code is used to define the grommet size in the connector part number. For example, connector AFB1516-621SL-18 comes with a size “18” grommet, for use with a cable whose diameter range is 1.000 – 1.125 inches
(25.4 - 28.6mm).
Page 37
Vantage offers a full line of tooling to assist in the termination and assembly of
our attachment plugs and receptacles. StarLine, GD/SD, GB/SB & BM Series
and StrateLine power connectors, feature pressure termination and come with all
required tooling. For StarLine control connectors, the AF/SF & BM Series,
Vantage requires using a full-cycle eight indent crimp tool. Please contact us for
assistance in specifying your tooling needs.
Pressure Termination for safe and
reliable assembly in the field.
Crimp Tools
T-104-CT-K Crimp Tool Kit. Hand tool with accessories for contacts #18
through #10 (carrying case and tool inspection gage not shown).
T-103-CT-K Crimp Tool Kit. Hand tool with accessories for contacts #18
through #10, shown with turret head detached (carrying case and tool
inspection gage not shown).
VANTAGE
TECHNOLOGY
T-105-HE, Pneumatic Crimp Tool. Available with dies, locators and
inspection gages for #18 through #4/0 contacts. A foot control is also
available. Operates on shop air and inert gas cylinders at 100 PSI.
Vantage Technology
Contact Extraction Tool
Pin and socket contact
extraction tool for AF, BM and
SF control connectors.
Contact Size
18
Extraction Tool
Part Number
T-106-18
16
T-106-16
12
T-106-12
10
T-106-10
Assembly Tools
Plug Assembly Tool
Furnished with plug.
Shell
Size
16
Part Number
Plug Assembly
Plug Disassembly
Tool
Tool
T-101-16A
T-102-16R
20
T-101-20A
T-102-20R
24
T-101-24A
T-102-24R
28
T-101-28A
T-102-28R
Cable Assemblies
Complete cable assemblies and receptacle distribution boxes
are available incorporating Vantage Technology connectors.
Please contact us regarding specification options.
Page 38
Plug Disassembly Tool
Ordered separately.
AF/SF
GD/SD
BM
Stainless Steel Weight
Factor 2.0
Shell
Size
16
A INCHES ±0.3
(mm ±8)
9.3 (236)
B INCHES ±0.3
(mm ±8)
10.3 (262)
C INCHES
(mm)
2.977 (75.6)
D INCHES ±0.3
(mm ±8)
8.4 (213)
3.75 - 10.25 (95 - 260)
Weight1 LBS
(kg)
4.0 (1.8)
20
10.0 (254)
11.0 (279)
3.577 (90.9)
9.0 (229)
5.75 - 14.25 (146 - 362)
5.2 (2.4)
24
10.4 (264)
11.4 (290)
4.182 (106.2)
9.4 (239)
8.25 - 17.25 (210 - 438)
7.2 (3.3)
28
10.9 (277)
11.9 (302)
4.814 (122.3)
9.8 (249)
13.75 - 19.75 (349 - 502)
9.1 (4.1)
16
10.3 (262)
11.3 (287)
2.977 (75.6)
9.4 (238)
3.75 - 10.25 (95 - 260)
3.9 (1.8)
20
11.0 (279)
12.0 (305)
3.577 (90.9)
10.0 (254)
5.75 - 14.25 (146 - 362)
6.0 (2.7)
24
11.4 (290)
12.4 (315)
4.182 (106.2)
10.4 (264)
8.25 - 17.25 (210 - 438)
8.4 (3.8)
28
11.9 (302)
12.9 (328)
4.814 (122.3)
10.8 (274)
B
A
13.75 - 19.75 (349 - 502)
12.1 (5.5)
GB/SB
GDU/SDU
Stainless Steel Weight
Factor 2.0
Attachment Plug
E INCHES (mm)
1
12
2
11
13
18
10
14
3G
19
9
17
4
15
16
5
6
8
7
1. Weights provided for Victory
Series (aluminum) with mechanical
clamp configuration. Multiply by
"Stainless Steel Weight Factor" to
determine weight for Millennium
Series (stainless steel).
ØC
PLUG FACE
(INSERT 16-612PL SHOWN)
D
AF/SF
GD/SD
BM
Stainless Steel Weight
Factor 2.4
Shell
Size
16
GB/SB
GDU/SDU
Stainless Steel Weight
Factor 2.4
E
F INCHES (mm)
G INCHES (mm)
H INCHES (mm)
NPT THREAD ‘J’
Weight1 LBS (kg)
2.9 (1.3)
7.9 (200)
6.9 (175)
2.977 (75.6)
1 ¼ - 11 ½
20
8.2 (208)
7.2 (183)
3.577 (90.9)
1 ½ - 11 ½
4.0 (1.8)
24
8.4 (213)
7.4 (188)
4.182 (106.2)
2 – 11 ½
5.4 (2.5)
28
8.8 (224)
7.8 (198)
4.814 (122.3)
2½-8
7.2 (3.3)
16
8.9 (226)
7.9 (201)
2.977 (75.6)
1 ¼ - 11 ½
3.4 (1.5)
20
9.2 (234)
8.2 (208)
3.577 (90.9)
1 ½ - 11 ½
5.0 (2.3)
24
9.4 (239)
8.4 (213)
4.182 (106.2)
2 – 11 ½
7.4 (3.4)
28
9.8 (249)
8.8 (224)
4.814 (122.3)
2½-8
9.5 (4.3)
F
G
THREAD 'J'
NPT Tapped Plug
1
12
2
18
10
14
3G
11
13
9
17
16
5
6
8
7
AF/SF
GD/SD
BM
Stainless Steel Weight
Factor 2.0
4
15
1. Weights provided for Victory
Series (aluminum). Multiply by
"Stainless Steel Weight Factor" to
determine weight for Millennium
Series (stainless steel).
ØH
19
PLUG FACE
(INSERT 16-612PL SHOWN)
Weight1 LBS
(kg)
3.4 (1.5)
Shell
Size
16
K INCHES ±0.3
(mm ±8)
10.0 (254)
L INCHES ±0.3
(mm ±8)
9.1 (231)
M INCHES (mm)
N INCHES (mm)
3.75 - 10.25 (95 - 260)
1.969 (50.1)
3.063 (77.8)
20
10.7 (272)
9.7 (246)
5.75 - 14.25 (146 - 362)
2.469 (62.7)
3.563 (90.5)
4.7 (2.1)
24
11.1 (282)
10.1 (257)
8.25 - 17.25 (210 - 438)
2.969 (75.4)
4.188 (106.4)
6.4 (2.9)
28
11.4 (290)
11.0 (279)
10.3 (262)
13.75 - 19.75 (349 - 502)
3.469 (88.1)
4.688 (119.1)
8.1 (3.7)
16
10.1 (257)
3.75 - 10.25 (95 - 260)
1.969 (50.1)
3.063 (77.8)
3.6 (1.6)
20
11.7 (297)
10.7 (272)
5.75 - 14.25 (146 - 362)
2.469 (62.7)
3.563 (90.5)
4.9 (2.2)
24
12.1 (307)
11.1 (282)
8.25 - 17.25 (210 - 438)
2.969 (75.4)
4.188 (106.4)
6.7 (3.0)
28
12.4 (315)
11.3 (287)
13.75 - 19.75 (349 - 502)
3.469 (88.1)
4.688 (119.1)
8.6 (3.9)
GB/SB
GDU/SDU
Stainless Steel Weight
Factor 2.0
COVER ADDS .8 (20.3mm) INCHES
TO DIMENSIONS "K" AND "L"
Attachment
Receptacle
ØP
3.53
(89.7mm)
K
ØN
3
4G
2
1
1. Weights provided for Victory
Series (aluminum) with
mechanical clamp configuration.
Multiply by "Stainless Steel
Weight Factor" to determine
weight for Millennium Series
(stainless steel).
P INCHES (mm)
RECEPTACLE FACE
L
M
Page 39
16
A INCHES1
(mm)
4.063 (103.2)
B INCHES1
(mm)
3.063 (77.8)
20
4.063 (103.2)
3.063 (77.8)
2.469 (62.7)
24
4.063 (103.2)
3.063 (77.8)
2.969 (75.4)
28
4.063 (103.2)
3.063 (77.8)
3.469 (88.1)
4.688 (119.1)
16
5.063 (128.6)
4.063 (103.2)
1.969 (50.0)
3.063 (77.8)
2
3 (1.4)
20
24
5.063 (128.6)
4.063 (103.2)
2.469 (62.7)
3.563 (90.5)
2½
5 (2.3)
5.063 (128.6)
4.063 (103.2)
2.969 (75.4)
4.188 (106.4)
3 1/8
8 (3.6)
28
5.063 (128.6)
4.063 (103.2)
3.469 (88.1)
4.688 (119.1)
3 5/8
14 (6.4)
Dimension
Shell Size
AF/SF
GD/SD
BM
Stainless Steel
Weight Factor 1.4
GB/SB
GDU/SDU
Stainless Steel
Weight Factor 1.6
PANEL MOUNT RECEPTACLE
MOUNTING DIMENSIONS
Panel
Mount
Receptacle
THREAD ‘E’
G-16UN
2
Weight LBS2
(kg)
3 (1.4)
3.563 (90.5)
2½
4 (1.8)
4.188 (106.4)
3 1/8
8 (3.6)
3 5/8
13 (5.9)
C INCHES (mm)
D INCHES (mm)
1.969 (50.0)
3.063 (77.8)
COVER ADDS .8 INCHES (20.3mm)
TO DIMENSIONS "A" AND "B"
3.531
(89.7mm)
A
B
ØJ
3
1
ØC
2
1
L
3
4G
4G
ØK
2
NOTE: THE CUTOUT DIMENSION "J" INCLUDES
0.0625" (1.6mm) RECEPTACLE SHELL CLEARANCE.
1. Subtract 0.5 inches
(12.7mm) from
dimensions A and B
Receptacle
for AF/SF style.
GD-B1716-23SL
2. Weights provided for
-L36 Shown
Victory Series
(aluminum). Multiply
by "Stainless Steel
Weight Factor" to
determine weight for
Millennium Series
(stainless steel).
ØD
36" (914.4 mm)
STANDARD LENGTH
E THREAD SIZE
'F' SQ
WEIGHT,
ANGLE ADAPTER
LBS
SHELL SIZE
0.5
16
0.5
20
2.9
24
2.9
28
"G" SQ
KG
0.23
0.23
1.30
1.30
ØH (4X)
45° ANGLE ADAPTER AND GASKET (OPTIONAL)
Mounting Dimensions
Shell Size
F INCHES (mm)
G INCHES (mm)
H INCHES (mm)
J INCHES (mm)
K INCHES (mm)
L INCHES (mm)
16
4.5 (114.3)
3.875 (98.4)
0.284 (7.2)
2.063 (52.4)
0.195 (5.0)
2.610 (66.3)
20
4.5 (114.3)
3.875 (98.4)
0.284 (7.2)
2.563 (65.1)
0.195 (5.0)
3.110 (79.0)
24
8 (203.2)
7 (177.8)
0.534 (13.6)
3.063 (77.8)
0.195 (5.0)
3.735 (94.9)
28
8 (203.2)
7 (177.8)
0.534 (13.6)
3.563 (90.5)
0.195 (5.0)
4.235 (107.6)
AF/SF
GD/SD
BM
Stainless Steel
Weight Factor 1.6
Shell
Size
16
20
24
M INCHES
(mm)
2.5 (63.5)
3 (76.2)
3.5 (88.9)
N INCHES
(mm)
2.875 (73.0)
3.469 (88.1)
4.031 (102.4)
P INCHES1
(mm)
4.5 (114.3)
4.531 (115.1)
4.906 (124.6)
28
4 (101.6)
2.5 (63.5)
3 (76.2)
3.5 (88.9)
4 (101.6)
4.625 (117.5)
4.969 (126.2)
3.656 (92.9)
2.875 (73.0)
3.469 (88.1)
4.031 (102.4)
4.625 (117.5)
5 (127.0)
5.031 (127.8)
5.406 (137.3)
5.469 (138.9)
4.156 (105.6)
4.156 (105.6)
4.156 (105.6)
4.156 (105.6)
GB/SB
GDU/SDU
Stainless Steel
Weight Factor 1.7
NPT Mount
Receptacle
16
20
24
28
"M" HEX
ACROSS
FLATS
1
2
12
11
4
15
18
17
9
16
5
COVER ADDS .8 INCHES (20.3mm)
TO DIMENSIONS "P" AND "Q"
Weight LBS2
(kg)
3 (1.4)
5 (2.3)
8 (3.6)
3-8
3.469 (88.1)
13 (5.9)
1 ½ - 11 ½
2 – 11 ½
2½-8
3-8
1.969 (50.0)
2.469 (62.7)
2.969 (75.4)
3.469 (88.1)
3 (1.4)
5 (2.3)
9 (4.1)
14 (6.4)
P
THREAD 'R'
Q
3.53
(89.7mm)
"N" HEX
ACROSS
CORNERS
S INCHES
(mm)
1.969 (50.0)
2.469 (62.7)
2.969 (75.4)
NPT
THREAD ‘R’
1 ½ - 11 ½
2 – 11 ½
2½-8
ØS
8
7
6
Page 40
10
1. Subtract 0.5 inches
(12.7mm) from dimensions P
and Q for AF/SF style.
2. Weights provided for
Victory Series (aluminum).
Multiply by "Stainless Steel
Weight Factor" to determine
weight for Millennium Series
(stainless steel).
14
3G
13
19
Q INCHES1
(mm)
3.656 (92.9)
3.656 (92.9)
3.656 (92.9)
3X ALLEN HEAD SET
SCREW FOR LOCKING
PANEL MOUNTED
RECEPTACLE IN PLACE
0.75
(19.1mm)
36" (914.4 mm)
STANDARD LENGTH
AF-B1916-612SL-L36 Shown
Receptacle, Junction Box
Shell Size
AF/SF
GD/SD
BM
Stainless Steel
Weight Factor 1.2
GB/SB
GDU/SDU
Stainless Steel
Weight Factor 1.2
A INCHES (mm)
B INCHES (mm)
C INCHES (mm)
D INCHES (mm)
1
Weight LBS (kg)
16
10.063 (255.6)
10.25 (260.4)
7.375 (187.3)
7.75 (196.9)
12.9 (5.9)
20
10.063 (255.6)
10.25 (260.4)
7.375 (187.3)
7.75 (196.9)
13.7 (6.2)
24
14.563 (370.0)
14 (355.6)
9.688 (246.1)
10.125 (257.2)
21.9 (9.9)
28
14.563 (370.0)
14 (355.6)
9.688 (246.1)
10.125 (257.2)
22.8 (10.3)
16
11.563 (293.7)
11.125 (282.6)
7.875 (200.0)
8.25 (209.6)
13.0 (5.9)
20
11.563 (293.7)
11.125 (282.6)
7.875 (200.0)
8.25 (209.6)
13.9 (6.3)
24
15.438 (392.1)
14.875 (377.8)
10.188 (258.8)
10.625 (269.9)
22.5 (10.2)
28
15.438 (392.1)
14.875 (377.8)
10.188 (258.8)
10.625 (269.9)
23.2 (10.5)
1. Weights provided for Victory Series (aluminum). Multiply by "Stainless Steel Weight Factor" to determine weight for Millennium Series (stainless steel).
CL NPT HUB
TOP & BOT
A
85
8 [219.5mm]
B
D
C
11 [Ø8.7mm]
4X Ø32
15
8 [41.4mm]
11 [Ø8.7mm]
4X Ø32
75
8 [194.1mm]
A
B
75
8 [194.1mm]
85
8 [219.5mm]
4 [101.8mm]
5 [134.9mm]
516
C
4 [101.8mm]
CL NPT HUB
D
SHELL SIZES 16 AND 20
11 [59.2mm]
232
5 [160.7mm]
616
SHELL SIZES 24 AND 28
Receptacle, Ground Power
POWER BOX
COVER
MAXIMUM DIAMETER
OF SECOND CONDUIT
TAP IN SIDE WALL IS 2 1/2"
Ø19.8 [Ø502mm]
14.8 [375mm]
SIDE
4" MAXIMUM CONDUIT SIZE
SIDE "D"
POWER BOX
COVER
INTERMEDIATE
COVER
6.9 [174mm]
SIDE "A"
SIDE "C"
POWER BOX
SIDE "B"
BOTTOM
23.5 [596mm]
WEIGHT LBS (kg)
65 (29.5)
POWER BOX COVER
191 (86.6)
INTERMEDIATE COVER
409 (185.5)
POWER BOX
665 (301.6)
COMPLETE ASSEMBLY
Page 41
GB
-
1
B
17
16
2
3
4
1. Classification
GB / SB
GD / SD
BM
GDU / SDU
GDT / SDT
-
=
=
=
=
=
23
S
L
01
5
6
7
8
Groups B-C-D areas &
Groups B-C-D areas &
Group F-G areas
Groups B-C-D areas &
Groups B-C-D areas &
-
FH
-
XX
9
10
EEx d IIC T6 IP 66/67 T70°
EEx d IIC T6 IP 66/67 T70°
EEx d IIC T6 IP 66/67 T70°
EEx d IIC T6 IP 66/67 T70°
2. Cover
B = Cover
3. Shell Style
17 = Receptacle for Junction Box or Panel-mount
19 = Receptacle for NPT-mount
4. Shell Size
16 = Shell Size 16
20 = Shell Size 20
24 = Shell Size 24
28 = Shell Size 28
5. Insert
30 thru 260 amps – through 1000 VAC. See Insert Code column in Insert Table below.
6. Gender
S = Female (Socket) Insert
Shell Size 16 = 1 ½” NPT
Shell Size 20 = 2” NPT
Shell Size 24 = 2 ½” NPT
Shell Size 28 = 3” NPT
P = Male (Pin) Insert
7. Contact Plating L = Silver Plate (Standard). Ground contacts are gold over silver.
8. Insert Keying
Alternate = See Key Positions column in Insert Table.
Blank = Normal Key
9. Hub Accessory See Junction Box Table
10. Wire Lead
Variation
Blank = Panel / 17 Style or NPT / 19 Style
See Wire Length Table
Receptacle,
Junction Box
Per customer requirements.
Receptacle,
Junction Box
Receptacle,
Panel-Mount
Receptacle,
NPT
INSERT TABLE
(Reference Pages 29 thru 32)
WIRE LENGTH
AMPERES
30
60
100
200
32
63
125
260
INSERT
SHELL
SIZE
2 POLE, 3 WIRE
16
51
N+5
3 POLE, 4 WIRE
16
23
N+5
4 POLE, 5 WIRE
20
36
N+2
CODE
INSERT
KEY
1
CODE POSITIONS
2 POLE, 3 WIRE
20
61
N+7
3 POLE, 4 WIRE
20
40
N+4
4 POLE, 5 WIRE
24
29
N+3
2 POLE, 3 WIRE
24
60
N+7
3 POLE, 4 WIRE
24
39
N+5
4 POLE, 5 WIRE
28
23
N+3
2 POLE, 3 WIRE
28
30
N+9
3 POLE, 4 WIRE
28
31
N + 10
5 POLE 6 WIRE (3 POLE
4 WIRE and 2 relay contacts)
28
42
N+3
1. NORMAL KEY POSITION = N; ALTERNATE KEYS = 01, 02, ETC.
Meters
L12
12
0.31
L24
24
0.61
L36
36
Etc
0.91
Etc
JUNCTION BOX
SHELL
SIZE
CONDUIT HUB CONDUIT HUB
LOCATION
SIZE (Inches)
16 & 20
‘F’
‘H’
TOP & BOTTOM 1½ - 11½ NPT
24
‘B’
BOTTOM
‘K’
2½ - 8 NPT
28
‘B’
BOTTOM
‘L’
3 - 8 NPT
Example: Suffix “-FH” denotes thru feed
with a 1½ inch hub.
Note: Code logic is provided to identify features called out by
standard part numbers. Not all component codes are compatible
with all others. Reference part number tables under appropriate
product sections of this catalog or consult Vantage Technology.
Page 42
LENGTH
Inches
GB
-
1
D
10
16
2
3
4
1. Classification
GB / SB
GD / SD
BM
GDU / SDU
GDT / SDT
-
=
=
=
=
=
51
P
L
01
5
6
7
8
Groups B-C-D areas &
Groups B-C-D areas &
Group F-G areas
Groups B-C-D areas &
Groups B-C-D areas &
XX
9
EEx d IIC T6 IP 66/67 T70°
EEx d IIC T6 IP 66/67 T70°
EEx d IIC T6 IP 66/67 T70°
EEx d IIC T6 IP 66/67 T70°
2. Cover
Blank = No Cover
3. Shell Style
10 = Plug, Attachment Style
15 = Receptacle, Attachment Style
4. Shell Size
16 = Shell Size 16
20 = Shell Size 20
5. Insert
30 thru 260 amps – through 1000 VAC.
See Insert Code column in Insert Table below.
6. Gender
S = Female (Socket) Insert
7. Contact Plating
L = Silver plate (Standard). Ground contacts are gold over silver.
8. Insert Keying
Blank = Normal Key
9. Grommet
Replace XX with cable diameter code number from Page 37.
Plug, Attachment
-
B = Cover / Receptacle
D = Cover / Plug
24 = Shell Size 24
28 = Shell Size 28
P = Male (Pin) Insert
Alternate = See Key Positions column in Insert Table.
Plug, Conduit Tapped
Receptacle, Attachment
TC = Tapped Conduit
Receptacle, Conduit Tapped
INSERT TABLE
(Reference Pages 29 thru 32)
AMPERES
30
60
100
200
32
63
125
260
INSERT
SHELL
SIZE
INSERT
KEY
1
CODE POSITIONS
2 POLE, 3 WIRE
16
51
N+5
3 POLE, 4 WIRE
16
23
N+5
4 POLE, 5 WIRE
20
36
N+2
2 POLE, 3 WIRE
20
61
N+7
3 POLE, 4 WIRE
20
40
N+4
4 POLE, 5 WIRE
24
29
N+3
2 POLE, 3 WIRE
24
60
N+7
3 POLE, 4 WIRE
24
39
N+5
4 POLE, 5 WIRE
28
23
N+3
2 POLE, 3 WIRE
28
30
N+9
3 POLE, 4 WIRE
28
31
N + 10
5 POLE 6 WIRE (3 POLE
4 WIRE and 2 relay contacts)
28
42
N+3
Note: Code logic is provided to
identify features called out by
standard part numbers. Not all
component codes are compatible
with all others. Reference part
number tables under appropriate
product sections of this catalog
or consult Vantage Technology.
1. NORMAL KEY POSITION = N; ALTERNATE KEYS = 01, 02, ETC.
Page 43
AF
-
1
B
17
16
2
3
4
-
655
S
L
01
5
6
7
8
FH
-
XXX
9
10
1. Classification
AF = Groups B-C-D & EEx d IIC T6 IP 66/67 T70°
SF = Groups B-C-D & EEx d IIC T6 IP 66/67 T70°
BM = Groups F-G
2. Cover
B = Cover
3. Shell Style
17 = Receptacle for box or panel-mount
19 = Receptacle for NPT-mount
4. Shell Size
16 = Shell Size 16
20 = Shell Size 20
24 = Shell Size 24
28 = Shell Size 28
5. Insert
10 through 100 contacts; See Insert Code column in Insert Table below.
6. Gender
S = Female (Socket) Insert
P = Male (Pin) Insert
7. Contact Plating
L = Standard Silver
K = Gold over silver
8. Insert Keying
Blank = Normal Key
Alternate = See Key Positions column in Insert Table.
9. Hub Accessory
See Junction Box Table
Blank = Panel / 17 Style or NPT / 19 Style
10. Wire Lead Variation
Receptacle,
Junction Box
Shell Size 16 = 1½” NPT
Shell Size 20 = 2” NPT
Shell Size 24 = 2½" NPT
Shell Size 28 = 3” NPT
D = Gold over nickel
See Wire Length Table. Per customer requirements.
Receptacle,
Junction Box
INSERT TABLE
(Reference Pages 32 thru 36)
SHELL
INSERT
CONTACT
PIN SIZE
2
1
SIZE
CODE
KEY POSITIONS
QUANTITY
AWG (mm )
10
#12 (4.0)
16
681
N+4
10
#12 / G (4.0)
16
676
N+1
19
#12 / G (4.0)
16
612
N+4
19
#12 (4.0)
16
677
N+1
19
#12 (4.0)
20
676
N+5
19
#12 / G (4.0)
20
688
N
19
#16 (1.5)
16
655
N+9
20
#12 (4.0)
20
632
N+3
20
#12 / G (4.0)
20
687
N+1
37
#12 (4.0)
20
686
N
37
#12 / G (4.0)
20
650
N+3
37
#16 (1.5)
16
621
N+9
55
#18 (.75)
16
640
N + 10
61
#18 (.75)
16
633
N+4
68
#16 (1.5)
20
613
N+4
100
#16 (1.5)
24
613
N+4
1. NORMAL KEY POSITION = N; ALTERNATE KEYS = 01, 02, ETC.
Page 44
-
Receptacle,
Panel-Mount
Receptacle,
NPT
WIRE LENGTH
CODE
LENGTH
Inches
Meters
L12
12
0.31
L24
24
0.61
L36
36
Etc
0.91
Etc
JUNCTION BOX
SHELL
SIZE
CONDUIT HUB CONDUIT HUB
LOCATION
SIZE (Inches)
16 & 20
‘F’
‘H’
TOP & BOTTOM 1½ - 11½ NPT
24
‘B’
BOTTOM
‘K’
2½ - 8 NPT
28
‘B’
BOTTOM
‘L’
3 - 8 NPT
Example: Suffix “-FH” denotes thru feed
with a 1½ inch hub.
AF
-
1
D
10
16
2
3
4
-
621
P
L
01
5
6
7
8
-
XX
9
-
XXX
10
1. Classification
AF = Groups B-C-D & EEx d IIC T6 IP 66/67 T70°
SF = Groups B-C-D & EEx d IIC T6 IP 66/67 T70°
BM = Groups F-G
2. Cover
Blank = No Cover
3. Shell Style
10 = Plug, Attachment
15 = Receptacle, Attachment
4. Shell Size
16 = Shell Size 16
20 = Shell Size 20
5. Insert
10 through 100 contacts.
See Insert Code column in Insert Table below.
6. Gender
S = Female (Socket) Insert
P = Male (Pin) Insert
7. Contact Plating
L = Standard Silver
K = Gold over silver
8. Insert Keying
Blank = Normal Key
Alternate = See Key Positions column in Insert Table.
9. Grommet
Replace XX with cable diameter
code number from Page 37.
TC = Tapped Conduit
B = Basket Weave
10. Wire Lead
Variation
Plug, Conduit Tapped
Receptacle, Conduit Tapped
B = Cover / Receptacle
D = Cover / Plug
24 = Shell Size 24
28 = Shell Size 28
D = Gold over nickel
See Wire Length Table. Per customer requirements.
INSERT TABLE
(Reference Pages 32 thru 36)
CONTACT
PIN SIZE
SHELL
INSERT
KEY
2
1
QUANTITY
AWG (mm )
SIZE
CODE
POSITIONS
10
#12 (4.0)
16
681
N+4
10
#12 / G (4.0)
16
676
N+1
19
#12 / G (4.0)
16
612
N+4
19
#12 (4.0)
16
677
N+1
19
#12 (4.0)
20
676
N+5
19
#12 / G (4.0)
20
688
N
19
#16 (1.5)
16
655
N+9
20
#12 (4.0)
20
632
N+3
20
#12 / G (4.0)
20
687
N+1
37
#12 (4.0)
20
686
N
37
#12 / G (4.0)
20
650
N+3
37
#16 (1.5)
16
621
N+9
55
#18 (.75)
16
640
N + 10
61
#18 (.75)
16
633
N+4
68
#16 (1.5)
20
613
N+4
100
#16 (1.5)
24
613
N+4
1. NORMAL KEY POSITION = N; ALTERNATE KEYS = 01, 02, ETC.
Plug, Attachment
Receptacle, Attachment
Note: Code logic is provided to identify features called out by standard
part numbers. Not all component codes are compatible with all others.
Reference part number tables under appropriate product sections of
this catalog or consult Vantage Technology.
Page 45
GD
S
1
2
-
D5
L
1
3
4
5
-
92
A
N
M
E
Q
P
6
7
8
9
10
11
12
SINGLE
1. Classification
2. Controls
GD = Class I, Groups B-C-D, 600 VAC, 60/400 Hertz
EEx d IIC T6 IP 66/67 T70°, 1000 VAC / 500 VDC
Omit if Not Required
R = 1 red pilot + 1 push button switch
S = 1 red and 1 amber pilot light +
P = 1 red and 1 green pilot light +
2 push button switches
2 push button switches
3. Receptacle
D5 = See Receptacle Table
4. Contact
L = Crimp Type, Silver-plated / Standard
5. Insert Keying
Omit for normal (N) key - See Receptacle Table
6. Box Style
92 = Single Receptacle
7. NPT Location
Side A, B, C, D or E - See Conduit Location Drawing
8. NPT Size #1
Select from Code Symbol Table
9. NPT Size #2
Select from Code Symbol Table - Omit if Not Required
10. (11 and 12)
Same as 7, 8, and 9 - If Required
RECEPTACLE TABLE
(Reference Pages 29 thru 32)
AMPS
30
32
60
63
100
125
200
260
INSERT
INSERT
SYMBOL RECEPTACLE ASSEMBLY
2 POLE, 3 WIRE
A1
GD-1716-51SL-L36
3 POLE, 4 WIRE
A2
GD-1716-23SL-L36
4 POLE, 5 WIRE
B1
GD-1720-36SL-L36
2 POLE, 3 WIRE
B2
GD-1720-61SL-L36
3 POLE, 4 WIRE
B3
GD-1720-40SL-L36
4 POLE, 5 WIRE
C1
GD-1724-29SL-L36
2 POLE, 3 WIRE
C2
GD-1724-60SL-L36
3 POLE, 4 WIRE
C3
GD-1724-39SL-L36
4 POLE, 5 WIRE
D1
GD-1728-23SL-L36
2 POLE, 3 WIRE
D3
GD-1728-30SL-L36
3 POLE, 4 WIRE
D4
GDU-1728-31SL-L36
5 POLE, 6 WIRE
D5
GDT-1728-42SL-L36
(3P, 4W, 2 #10 relay contacts)
1. NORMAL KEY POSITION = N; ALTERNATE KEYS = 01, 02, ETC.
KEY
POSITIONS1
N+5
N+5
N+2
N+7
N+4
N+3
N+7
N+5
N+3
N+9
N+3
N + 10
CODE SYMBOLS – NPT
SYMBOL
4
5
6
7
8
9
M
N
P
Q
Page 46
NPT SIZE
½”
¾”
1”
1 ¼”
1 ½”
2”
2 ½”
3”
3 ½”
4”
CONDUIT LOCATION
LETTERS
If the first opening is to be
omitted, use the letter 'O'. For
example, AO9 will specify one
2" opening on side 'A'
centered 11.5" off the bottom.
GD
DUPLEX
-
A1
B3
L
1
2
2
3
4
5
6
1
-
93
B
6
8
D
7
M
7
8
9
10
11
12
13
1.
Classification
GD = Class I, Groups C-D, 600 VAC, 60/400 Hertz
EEx d IIC T6 IP 66/67 T70°, 1000 VAC / 500 VDC
2.
Receptacle #1
A1 = See Receptacle Table
3.
Receptacle #2
B3 = See Receptacle Table
4.
Contact
L = Crimp Type, Silver-plated / Standard
5.
Insert Keying #1 Omit for normal (N) key - See Receptacle Table
6.
Insert Keying #2 Omit for normal (N) key - See Receptacle Table
7.
Box Style
93 = Duplex Receptacle
8.
NPT Location
Side A, B, C, D or E - See Conduit Location Drawing
9.
NPT Size #1
Select from Code Symbol Table
10.
NPT Size #2
Select from Code Symbol Table - Omit if Not Required
11.
(12 and 13)
Same as 8, 9, and 10 – If Required
RECEPTACLE TABLE
(Reference Pages 29 thru 32)
AMPS
30
32
60
INSERT
INSERT
SYMBOL
RECEPTACLE ASSEMBLY
KEY
1
POSITIONS
2 POLE, 3 WIRE
A1
GD-1716-51SL-L36
N+7
3 POLE, 4 WIRE
A2
GD-1716-23SL-L36
N+5
4 POLE, 5 WIRE
B1
GD-1720-36SL-L36
N+2
2 POLE, 3 WIRE
B2
GD-1720-61SL-L36
N+7
3 POLE, 4 WIRE
B3
GD-1720-40SL-L36
N+4
63
1. NORMAL KEY POSITION = N; ALTERNATE KEYS = 01, 02, ETC.
CODE SYMBOLS – NPT
SYMBOL
NPT SIZE
4
½”
5
6
¾”
1”
7
8
1 ¼”
1 ½”
9
M
2”
2 ½”
N
3”
P
3 ½”
Q
4”
CONDUIT LOCATION
LETTERS
If the first opening is to be
omitted, use the letter 'O'. For
example, AO9 will specify one
2" opening on side 'A'
centered 11.5" off the bottom.
Note: Code logic is provided to identify features called out by standard part numbers.
Not all component codes are compatible with all others. Reference part number tables
under appropriate product sections of this catalog or consult Vantage Technology.
Page 47
Circuit Breaking, Delayed Action Type
Explosionproof, Class I, Groups C and D
20 or 30 Amperes
2 Pole, 3 Wire or 3 Pole, 4 Wire
EPD Plugs and ER Receptacles, in addition to their
regular function of making electrical connections to
portable equipment, are current-rupturing devices which
provide a safe and positive means for opening and
closing electrical circuits.
The contacts are confined within closed chambers to
snuff the arc and are detained a sufficient length of time
in their travel to permit cooling before exposure to the
atmosphere. This is accomplished by the delayed
action feature, which operates on the extremely simple
straight-line principle illustrated schematically below.
Contact units are factory-sealed in the receptacle
housing at the terminal end therefore seal fittings are
not required adjacent to the receptacle. Flexible lead
wires are provided for connection to the circuit wires.
Plugs and receptacles with a longer extra pole connect
directly to the shell, completing the grounding circuit
through the conduit system. The ground pole of the
plug has a solder-less lug for connecting the extra
conductor of the portable cord which is required by
Article 500 of the N.E.C. for grounding non-current
carrying metal parts of portable devices
Listed plugs fit only receptacles of the same rating.
Circuit Breaking, Delayed Action Operating Principle
Page 48
Factory Sealed
EPD PLUGS AND ERR RECEPTACLES
CIRCUIT BREAKING WITH DELAYED ACTION
Explosionproof Class I, Groups C and D
ERR
Receptacles
ERR Two-Gang
Receptacles
EPD Plugs - Aluminum
Alloy
Plugs fit only receptacles of the same
electrical rating as listed in the spaces
directly to the left of each plug group.
For Circuits
Hub Positions
Hub Size
Receptacle Catalog Number
Diameter Cord
Plug Catalog Number
.250 to .625
EPD-51532
.250 to .625
EPD-51542
20 AMPERE
20 Amperes or 1 HP, 120 or 240 Volts - 60 Hz A.C.
2 Pole
3 Wire
2 Pole
3 Wire
Single
Duplex
Dead End ‡
½
¾
1
ERRA-11532
ERRA-21532
ERRA-31532
ERRA-115322
ERRA-215322
ERRA-315322
Through Feed
½
¾
1
ERRC-11532
ERRC-21532
ERRC-31532
ERRC-115322
ERRC-215322
ERRC-315322
20 Amperes or 1 ½ HP, 120 or 240 Volts - 60 Hz A.C.
3 Pole
4 Wire
3 Pole
4 Wire
Dead End ‡
½
¾
1
ERRA-11542
ERRA-21542
ERRA-31542
ERRA-115422
ERRA-215422
ERRA-315422
Through Feed
½
¾
1
ERRC-11542
ERRC-21542
ERRC-31542
ERRC-115422
ERRC-215422
ERRC-315422
30 AMPERE
30 Amperes or 1 ½ HP, 120 or 240 Volts; 7 Amperes or ½ HP, 480 Volts - 60 Hz A.C.
Dead End ‡
¾
1
ERRA-23032
ERRA-33032
ERRA-230322
ERRA-330322
Through Feed
¾
1
ERRC-23032
ERRC-33032
ERRC-230322
ERRC-330322
2 Pole
3 Wire
.375 to .625
.626 to .875
EPD-53032
EPD-73032
30 Amperes or 3 HP, 120 or 240 Volts; 7 Amperes or ½ HP, 480 Volts - 60 Hz A.C.
Dead End ‡
¾
1
ERRA-23042
ERRA-33042
ERRA-230422
ERRA-330422
Through Feed
¾
1
ERRC-23042
ERRC-33042
ERRC-230422
ERRC-330422
3 Pole
4 Wire
.375 to .625
.626 to .875
EPD-53042
EPD-73042
‡ Can be installed with hub at top or bottom, as covers are reversible.
Dimensions:
Height including hubs: 6 1/4" except 1" hub sizes which are 6 ½".
Width: 3 ½" for single gang - 7 3/8" for two gang.
Mounting Holes: 11/32" diameter on 5 ½" x 2 ½" centers.
Depth from mounting surface to end of receptacle cover: 7 1/8" for 20 amperes - 8 3/4" for 30 ampere.
See Page 52 for Part Number Code Logic.
Page 49
Factory Sealed
EPD PLUGS AND ERH RECEPTACLES
CIRCUIT BREAKING WITH DELAYED ACTION
Explosionproof Class I, Groups C and D
ERH
Receptacles
ERH Two-Gang
Receptacles
EPD Plugs - Aluminum
Alloy
Plugs fit only receptacles of the same
electrical rating as listed in the spaces
directly to the left of each plug group.
For Circuits
Hub Positions
Hub Size
Receptacle Catalog Number
Diameter Cord
Plug Catalog Number
.250 to .625
EPD-51532
.250 to .625
EPD-51542
20 Amperes or 1 HP, 120 or 240 Volts - 60 Hz A.C.
20 AMPERE
2 Pole
3 Wire
2 Pole
3 Wire
Single
Two-Gang
Dead End ‡
½
¾
1
ERHA-11532
ERHA-21532
ERHA-31532
ERHA-115322
ERHA-215322
ERHA-315322
Through Feed
½
¾
1
ERHC-11532
ERHC-21532
ERHC-31532
ERHC-115322
ERHC-215322
ERHC-315322
20 Amperes or 1 ½ HP, 120 or 240 Volts - 60 Hz A.C.
3 Pole
4 Wire
3 Pole
4 Wire
Dead End ‡
½
¾
1
ERHA-11542
ERHA-21542
ERHA-31542
ERHA-115422
ERHA-215422
ERHA-315422
Through Feed
½
¾
1
ERHC-11542
ERHC-21542
ERHC-31542
ERHC-115422
ERHC-215422
ERHC-315422
30 Amperes or 1 ½ HP, 120 or 240 Volts; 7 Amperes or ½ HP, 480 Volts - 60 Hz A.C.
Dead End ‡
¾
1
ERHA-23032
ERHA-33032
ERHA-230322
ERHA-330322
Through Feed
¾
1
ERHC-23032
ERHC-33032
ERHC-230322
ERHC-330322
30 AMPERE
2 Pole
3 Wire
.375 to .625
.626 to .875
EPD-53032
EPD-73032
30 Amperes or 3 HP, 120 or 240 Volts; 7 Amperes or ½ HP, 480 Volts - 60 Hz A.C.
Dead End ‡
¾
1
ERHA-23042
ERHA-33042
ERHA-230422
ERHA-330422
Through Feed
¾
1
ERHC-23042
ERHC-33042
ERHC-230422
ERHC-330422
3 Pole
4 Wire
.375 to .625
.626 to .875
‡ Can be installed with hub at top or bottom, as covers are reversible.
Dimensions:
Height including hubs: 6 1/4" except 1" hub sizes which are 6 ½".
Width: 3 ½" for single gang - 7 3/8" for two gang.
Mounting Holes: 11/32" diameter on 5 ½" x 2 ½" centers.
Depth from mounting surface to end of receptacle cover: 7 1/8" for 20 amperes - 8 3/4" for 30 ampere.
See Page 52 for Part Number Code Logic.
Page 50
EPD-53042
EPD-73042
Featuring an Interlocked Tumbler Switch
Explosionproof and Dust-tight, Class I, Group D and Class II, Group G
APPLICATION: Used as service outlets for portable electrical
equipment in hazardous locations.
CONSTRUCTION: Plugs cannot be inserted or withdrawn unless
switch is open. Switch cannot be closed unless plugs are fully
inserted. The extra pole of the receptacle is connected to the
housing to complete the equipment ground circuit.
Series
Size
NPT (inches)
A
(inches)
B
(inches)
1/2
3/4
1
21/32
25/32
7/8
5/8
17/32
17/32
YX
Rust Proofed Ferrous Alloy
Inside Clear Dimensions (inches)
Length
2 15/16
2 15/16
2 15/16
Width
2 17/32
2 17/32
2 17/32
Depth
2 9/16
2 9/16
2 9/16
2 Pole, 3 Wire
30 Amp 250 Vac
1 HP 460 Vac
2 HP 240 Vac
3 Pole, 4 Wire
20 Amp 460 Vac
30 Amp 250 Vac
2 HP 240 Vac or 480 Vac
Catalog Number
Catalog Number
Hub Size (NPT inches)
YXA-13022-G
YXA-13032-G
1/2
YXA-23022-G
YXA-23032-G
3/4
YXA-33022-G
YXA-33032-G
1
YXRL-113022-G
YXRL-113032-G
1/2
YXRL-223022-G
YXRL-223032-G
3/4
YXRL-333022-G
YXRL-333032-G
1
PXD Series Plugs for YX Series Receptacles
With Strain Relief Cord Grip Aluminum Alloy, Natural Finish
2 Pole, 3 Wire
30 Amp 250 Vac
1 HP 460 Vac
2 HP 240 Vac
3 Pole, 4 Wire
20 Amp 460 Vac
30 Amp 250 Vac
2 HP 240 Vac or 480 Vac
Catalog Number
Catalog Number
Diameter Cord (inches)
PXD-53032-G
PXD-53042-G
.250 to .625
PXD-73032-G
PXD-73042-G
.625 to .875
See Page 53 for Part Number Code Logic.
Page 51
EPD
-
1
3
30
3
2
2
3
4
5
1. Classification
EPD = Explosionproof … Class I, Groups C and D
2. Cable Diameter
Range
5 = .250” to .625” (15 Amp)
5 = .375” to .687” (30 Amp)
7 = .750” to .875” (15 and 30 Amp)
3. Rating
15
= 20 amps / 1 HP
15
= 20 amps / 1½” HP 3 pole, 4 wire at 120 or 240 Vac
30
= 30 amps / 1½HP
7 amps / 1½ HP
2 pole, 3 wire at 120 or 240 Vac
480 volts – 60 Hz
30
= 30 amps / 3 HP
3 pole, 4 wire at 120 or 240 Vac
480 volts – 60 Hz
4. Insert
3 = 2 pole, 3 wire
4 = 3 pole, 4 wire
5. Voltage
2 = 240 volts
ER
R
A
1
2
3
2 pole, 3 wire at 120 or 240 Vac
See rating specified above.
-
2
30
3
2
2
4
5
6
7
8
1. Classification
ER = Explosionproof Receptacle … Class I, Groups C and D
2. Types
R = Angled (45˚) Receptacle
3. Style
A = Single Hub
C = Thru-feed Hub
P = Panel-mount
4. Hub Size
1 = ½” NPT
2 = ¾” NPT
3 = 1” NPT
5. Rating
15
= 20 amps
2 pole, 3 wire at 120 or 240 Vac / 1HP
15
= 20 amps
3 pole, 4 wire at 120 or 240 Vac / 1½ HP
30
= 30 amps
2 pole, 3 wire at 120 or 240 Vac / 1½HP
7 amps at 480 volts / ½ HP
30
= 30 amps
3 pole, 4 wire at 120 or 240 Vac / 3HP
7 amps at 480 volts / 1 HP
H = Straight (90˚) Receptacle
6. Insert
3 = 2 pole, 3 wire
4 = 3 pole, 4 wire
7. Voltage
2 = 240 volts
See rating specified above.
8. Gang Style
2 = 2 Gang Receptacle
Omit for single gang
Note: Code logic is provided to identify features called out by
standard part numbers. Not all component codes are compatible
with all others. Reference part number tables under appropriate
product sections of this catalog or consult Vantage Technology.
Page 52
PXD
-
1
5
30
3
2
2
3
4
5
-
G
6
1. Classification
PXD = Explosionproof Plugs Class I, Group D and Class II, Groups F and G
2. Cable Diameter
Range
5 = .250” to .625”
7 = .625” to .875”
3. Rating
30 = 30 amps at 240 Volt AC for 2 pole 3 wire
2 HP at 240 Vac
1 HP 480 Vac
30 = 30 amps at 240 Volt AC for 3 pole 4 wire
20 amps at 480 Volt AC
2 HP at 240 Vac or 480 Vac
4. Insert
3 = 2 pole, 3 wire
4 = 3 pole, 4 wire
5. Voltage
2 = 240 volts
6. Grounding
G = Grounded through shell and extra pole.
YX
A
1
2
-
See rating specified above.
2
2
30
3
2
3
4
5
6
7
-
G
8
1. Classification
YX = Explosionproof Receptacles Class I, Group D and Class II, Groups F and G
2. Hub Style
A = Top Hub
RL = Right and Left Thru-feed Hubs
3. Hub Size
1 = ½”
2 = ¾”
3 = 1”
4. Hub Size
Omit for top hub only
1 = ½”
2 = ¾”
3 = 1”
5. Rating
30 = 30 amps at 240 Volt AC for 2 pole 3 wire
2 HP at 240 Vac
1 HP 480 Vac
30 = 30 amps at 240 Volt AC for 3 pole 4 wire
20 amps at 480 Volt AC
2 HP at 240 Vac or 480 Vac
6. Insert
2 = 2 pole, 3 wire
3 = 3 pole, 4 wire
7. Voltage
2 = 240 volts
8. Grounding
G = Grounded through shell and extra pole.
See rating specified above.
Note: Code logic is provided to identify features called out by standard
part numbers. Not all component codes are compatible with all others.
Reference part number tables under appropriate product sections of this
catalog or consult Vantage Technology.
Page 53
Vantage has a proud history of maintaining an employee base with extensive experience and training in connectors and
hazardous locations. This provides you with not only the safest and most reliable products in the market, but the support
and service our customers have come to know and expect.
Field Support
Vantage connectors are
the most reliable available.
They are designed with
trouble-free field installation
in mind. Our years of
application support give us
the expertise to assist your
installation process. We
understand your industry
and can help assure you of
the most efficient, safe and
effective start-up.
Design
Vantage’s engineering and
design staff combine stateof-the-art modeling and
analysis software with
years of expertise in
electrical connector
technology. Innovations in
explosionproof products
keep us ahead of the
competition to provide you
with the safest and most
reliable systems today and
tomorrow.
Engineering Excellence
On-site Support
Haz-Loc Presentations
The specification and
installation of
explosionproof products
requires a robust
understanding of the
thermodynamic
relationships between
gases, dusts and electrical
installations. Let Vantage
present a rigorous training
session on hazardous
locations to your group.
We will provide instruction
on haz-loc theory and
Divisional / Zonal (ATEX)
requirements.
Connector Systems
Vantage goes beyond the
manufacture of world class
explosionproof connectors.
We can assist in the
design of your connector
system and also deliver
the system ready to install.
Save on the total installed
cost of your system by
letting us procure,
assemble and test it, all
with on time delivery. We
provide all required
documentation.
Haz-Loc Training
Pre-Assembled &
Ready to Install
Sales Staff
At Vantage, customer satisfaction is an integral ingredient of our
quality system. Our sales staff monitors your order from its
acceptance, through production right up to its final destination. We
understand the pressures you are under – changes occur, schedules
get reworked – Vantage works with you to get your order exactly as
your requirements demand. Call us and let us show you what
Vantage service can do for you.
Customer Satisfaction
Page 54
Vantage connectors have safely served industry for over forty years with unmatched reliability. Our connectors can be
found throughout the Americas and worldwide, on land-based facilities or offshore drilling platforms, in aerospace,
petroleum, process manufacturing, chemicals, mining and other industries. Let us know how we can meet your needs.
Page 55
Illinois North
Texas South
Wisconsin East, Michigan UP
The Klode Company
SMR Gulf Coast Inc.
The Klode Company
Fritz Klode
9313 Glacier Ridge
Richmond, IL 60071
Phone: 815-678-6700
Cell: 847-309-9000
Email: fritz@klodeco.com
Ted Ballinger
13639 Aldine Westfield Road
Houston, Texas 77039
Phone: 281-774-3757
Cell: 713-829-5630
FAX: 281-774-3744
Email: tballinger@smrgulfcoast.com
Mary Miller
153 Pine Court
Appleton, WI 54914
Phone: 920-830-1202
Cell: 414-254-3463
Email: mary@klodeco.com
United Kingdom, Europe
Corporate Office
Sprancon Ltd.
Vantage Technology LLC
John Backhouse
2A, Sandtop Lane
Blackfordby, Derbyshire. DE11 8AL
England
Phone: 44-1283-551360
Cell: 44-7900-054466
Email: johnbackhouse@sprancon.co.uk
4675 South Windermere Street
Englewood, Colorado 80110
Phone: 303-761-2121
FAX: 303-789-4215
Email: Support@VantageXP.com
Web Site: www.VantageXP.com
Page 56
Explosionproof Connectors
for
Hazardous Locations
Notice: Specifications are subject to change without notice. Contact Vantage Technology for
the latest specifications. All statements, information and data given herein are believed to be
accurate and reliable but are presented without guarantee, warranty, or responsibility of any
kind expressed or implied. Statements or suggestions concerning possible use of our products
are made without representation or warranty that any such use is free of patent infringement
and are not recommendations to infringe any patent. The user should not assume that all
safety measures are indicated or that other measures may not be required. Specifications are
typical and may not apply to all connectors.
© 2015 Vantage Technology
2/15
Page 57
NOTES
4675 South Windermere Street
Englewood, Colorado 80110
Page 58
Phone: 303-761-2121
Fax: 303-789-4215
Email: Support@VantageXP.com
Web Site: www.VantageXP.com
Vantage
Technology
Explosionproof
Connectors
Vantage Technology LLC
Englewood, Colorado USA
Phone 303-761-2121
VantageXP.com