ELECTRICAL
INSTALLATION
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
ELECTRICAL INSTALLATION
WORKSTATIONS
A2405 for 2 or 4 working places
Robust, simple, residual current and overcurrent protection, schemes and
components according to EEC rules
Dimensions of the bench: 2000 x 1000 x 800 (1890) mm (A2410) - 1100 x 1000 x
800 (1890) mm (A2405)
Bi-laminated wood, conglomerate top, 20 mm thick, white colour
Cable 3 m (5 wires) 2,5 mmq with CEE plug (On request other version)
Power supply 380 V + N + E ( other power supply available on request)
included: (for every side)
Residual current automatic switch 4x16 A, Id 0.03 A
Emergency mushroom button
Key switch
Output L1, L2, L3, N, T at safety terminals 4 mm
Schuko/universal socket outputs 10-16 A
Lamp holder with indicator lamp
Output 0-12-24 Vac with security terminals 4 mm and protection with fuse
Lamp holder with indicator lamp of low voltage
Optical circuit tester
ON REQUEST OTHER VERSION
Electrical installation bench may be equipped with:
a) Wooden panel for residential installations
b) Punctured metallic panel for industrial installations
c) DIN bar panel
d) Panel with 12 places for plug installation
e) Acoustic circuit tester
f) D.c. output 12-24 V/4 A
g) Single drawer for A2405 or double drawer for A2410
h) Magneto-thermic protection instead of the fuse
PANELS FOR A2405
PANEL WITH 12 FLUSH-MOUNTED BOXES FOR DOMESTIC INSTALLATION
WOODEN PANEL
PANEL OF PIERCED METAL GALVANIZED SHEET ( for industrial installation)
PANEL WITH METALLIC RODS DIN TYPE ( for industrial installation, pneumatic
A2410PS with built-in panel storage
Set of components for industrial installations
Set of components for civil installations
Tools suitcase
Rev 04.15
2
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
OPTION:
KIT FOR PNEUMATICS AND ELETTROPNEUMATICS
PANEL WITH 12 FLUSH-MOUNTED BOXES FOR DOMESTIC INSTALLATION
WOODEN PANEL
PANEL OF PIERCED METAL GALVANIZED SHEET ( for industrial installation)
PANEL OF PIERCED METAL GALVANIZED SHEET AND RAIL DIN ( for industrial installation)
CABINET FOR PANELS
Rev 04.15
3
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
Rev 04.15
4
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
INSTALLATION TRAINERS
FRAME
The structure can be placed on a workbench.
TYPE TU200
The workbench is suitable to satisfy the laboratory requests in the various sectors of the school.
•
Standard dimensions mm 2000x1000x900h (ON DEMAND: other dimensions).
•
Tubular structures mm 40x40x2
•
Wooden plane covered on both sides in plastic laminated with anti-scratch work plane.
•
Rounded corners bordered in rubber
•
Feet adjustable by screw
•
Painting with epoxy thermo-hardening dust and phospho-degreasing treatment (the
bench is guaranteed against scratch and rust).
Availability of a wide range of options afterwards described that increases the versatility of the
desk. Adaptability to the various requests of the user.
OPTIONS FOR THE WORKBENCH
•
•
•
•
•
•
•
DRAWERS: mounted under the worktop, single or double, side by side or as a chest of drawers.
Handle and lock included.
UNDER-POWER: powers mounted under the worktop on the short or long side of the bench including
wide range of accessories.
UP-POWER: powers mounted on the worktop on the short or long side of the bench (in this last case
put side by side or single ) including wide range of accessories.
SUPPORT PLACE: suitable to lodge instruments including wide range of accessories. Placed on the
worktop on the short or long side of the bench.
POWER SUPPLY: several models are available. See the relevant leaflet for detailed descriptions
KEYBOARD HOLDER: extractable keyboard placed under the worktop to lodge keyboard and
mouse
PC TOWER SUPPORT: for PC tower to be fixed under the worktop
LABORATORY'S CABLES (suitable security rules)
+ RACK FOR CABLES
AVAILABLE COLOURS: red, black, yellow, green, yellow-green, blue
LENGTHS: 25 - 50 - 100 - 150 - 200 cm
WORKING VOLTAGE: 1000 V CAT III
TEST : 7400 Vrms lasted 1 minute TRACTION: 150 N
rack for cables
On request
CURRENTS: versions from 16 - 20 - 30 A (on request other versions)
CABLE: PVC section 1 or 1.5 or 2.5 mm2 (on request other sections)
TEMPERATURE: 70 °C
DIAMETER: 4 mm On request other diameters
Rev 04.15
5
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
This Training System is based on integrated sets of Training Modules built in metal housings with safety connectors and clear
synoptic depicting the inside logic. The two sets are designed to exercise Installations circuits.
Each module contains one specific electrical function that can be connected to the others by means of 4 mm safety cables to
implement different circuit combinations (control circuits of the Industrial Installations modules, when powered at low voltage,
have 2 mm safety sockets).
The significant advantage for the student is that he can concentrate on the functional flow of the electrical system he is designing
without having to worry about the characteristics of the components. Another advantage is that the wiring, and therefore the
implementation time, is drastically reduced.
All Modules can be used both mounted on a vertical frame or on a bench and are therefore suitable for teacher demonstration
and for student use..
The available Modules are listed under each set in the following pages. Others can be developed on specific customer
requirements.
Various options include the Kit version, disassembled and provided with full mounting instructions to give the students additional
training opportunity (suffix K) or transparent panel version (suffix T) for a full internal view of the module.
Owing to their total compatibility, it is possible to expand, at any time, the Module configuration originally acquired.
Power Supply, Instruments, cables and a Test Station with Bench, Universal Power Supply and Panels particularly suitable for
testing motor control circuits, necessary for a correct execution of the exercises, are also proposed below as a separate set.
An Exercise Manual is supplied with each Installation Module Set. Both discuss the theory and show drawings of the electrical and
practical implementation of a large variety of exercises.
POWER SUPPLY
Input
Outputs
220/380 VAC
3 phase 0-250/440 VAC+N
220 VDC fixed
1 phase 0 – 220VAC independently variable
Thermal and Differential Protections
KIT LIGHTING INSTALLATIONS TYPE IMP/ILL
The kit allows students to acquire the basic competences on electrical circuits. Includes interchangeable modules that can be connected to each
other using cables typical laboratory. Modules insulating material with clear synoptic representing the connection diagram and predisposition for
fixing the DIN bar placed on the panel. Includes devices necessary to realize the experimental program provided in the kit. Safety Terminals and
user manual with tutorials.
The kit includes the following modules
a) Module One Pole, One Way Switch 250 V c.a. 10 A
b) Module One Pole, Two Ways Switch 250 V 10 A
c) Module switch 250 V c.a. 10 A
d) Module One Pole Reversing Switch 250 V c.a. 10 A
e) Module Illuminated Pushbutton 250 V 10 A
f) Module Universal Socket
g) Module Lamp holder and Lamp
h) Module fuse holders complete with fuses 2 A, 250 e 500 V
i) Module transformer 100 VA 127 V/220 V 2x12 V
l) Module relay 4 positions 10 A 220 V
m) Module stairs light timing relay 10 A 220 V excitation 220 V
n) Modulo fluorescent lamp complete with lamp holder, starter and choke
o) Set of Safety Terminals 4 mm 2,5 mm2
SUGGESTED EXERCISES
•
•
•
•
•
•
•
•
•
•
Rev 04.15
Single point controlled lighting system
Single point controlled lighting system with socket
Switch controlled two lamps lighting system
Two point controlled lighting system
Three point controlled lighting system
Four point controlled lighting system
Circuit breaking relay controlled lighting system
Switching relay controlled lighting system
Time relay controlled lighting system
Hot cathode fluorescent lamp system
6
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
KIT SIGNALLING INSTALLATIONS TYPE KIT/SEGN
The kit allows students to acquire the basic competences on electrical circuits. Includes interchangeable modules that can be connected to each
other using cables typical laboratory. Modules insulating material with clear synoptic representing the connection diagram and predisposition for
fixing the DIN bar placed on the panel. Includes devices necessary to realize the experimental program provided in the kit. Safety Terminals and
user manual with tutorials.
The kit includes the following modules
a) Module with n. 3 bell pushbuttons
b) Module with n. 3 door opener pushbuttons,
c) Module with n. 2 fuse holders complete with fuses
d) Module transformer mains 2x12V,
d) Module with n. 3 bell
e) Module with n. 3 buzzer
f) Modulo pulsanti
g) Module electric lock
h) Module external pushbutton panel with n. 3 pushbuttons
d) Modulo relay
e) Module signalling panel with 4 displays
f) Set of Safety Terminals 4 mm 2,5 mm2
SUGGESTED EXERCISES
•
•
•
•
•
Single control signalling system
Reciprocal contro signalling system
Display indicator and reset pushbutton signalling system
Ringing system with doors and main entrance control
Electric lock bell system
RESIDENTIAL INSTALLATIONS MODULE SET TYPE IMP/CIV
The kit allows students to acquire the basic competences on electrical circuits. Includes interchangeable modules that can be connected to each
other using cables typical laboratory. Modules insulating material with clear synoptic representing the connection diagram and predisposition for
fixing the DIN bar placed on the panel. Includes devices necessary to realize the experimental program provided in the kit. Safety Terminals and
user manual with tutorials.
The kit includes the following modules
The kit must be composed of: n. 3 general purpose pushbutton, n. 3 bell pushbutton, n. 3 door opener pushbutton, n. 3 switches, n. 2 changeover switches, n. 2 reversing switches, n. 1 mains socket, n. 3 bells, n. 1 buzzer, n. 2 fuse holders complete with fuses, n. 1 stairs light timing
relay, n. 1 pulse relay, n. 2 lamp holders complete with incandescent lamps, n. 1 fluorescent lamp complete with lamp holder, starter and choke,
n. 1 electric lock, n. 1 external pushbutton panel with 3 pushbutton, n. 1 signaling panel with 4 displays, n. 3 wall-type entry phones complete
with buzzer and 3 pushbutton, n. 1 power supply for the entry phone, n. 1 transformer mains/2x12V, 1 piece of DIN section, n. 1 set of screws to
fix the components,
SUGGESTED EXERCISES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rev 04.15
Single-point controlled lighting system
Single-point controlled lighting system with socket
Switch-controlled two-lamps lighting system
Two-point controlled lighting system
Three-point controlled lighting system
Four-point controlled lighting system
Circuit breaking-relay controlled lighting system
Switching-relay controlled lighting system
Timed-relay controlled lighting system
Hot cathode fluorescent lamp system
Signaling installations
Single-control signaling system
Reciprocal control signaling system
Display indicator and reset pushbutton signaling system
Ringing system with doors and main entrance control.
Electric lock bell system
Two reciprocal call house-phone at short distance.
Two reciprocal call house-phone at long distance
Coupled two house-phone system
Main house-phone and two shunted house-phones system
Intercommunicating house-phone system
7
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
INDUSTRIAL INSTALLATIONS MODULE SET TYPE IMP/IND
The kit allows students to acquire the basic competences on electrical circuits. Includes interchangeable modules that can be connected to each
other using cables typical laboratory. Modules insulating material with clear synoptic representing the connection diagram and predisposition for
fixing the DIN bar placed on the panel. Includes devices necessary to realize the experimental program provided in the kit. Safety Terminals and
user manual with tutorials.
The kit includes the following modules
N.1 Module with n. 5 fuse holders complete with fuses 4/6 A
-
-
N.1 module TR 220/24 with transformer 230/12-24 V 50-60 Hz 100 VA
N.4 Module IMPI04/K with electromagnetic contactor for industrial uses coil of 24 V a.c.
N.6 Module IMPI05/T timing relay
N.3 Module auxiliary relay for industrial uses, coil 24 V a.c.
N.2 Module IMPI02/PL3 with n. 3 push-buttons for industrial uses
N.2 Module IMPI03/LS with n. 3 lamp sockets for industrial uses with lamps of 24 V
N.1 Module with three-phase Graetz bridge 600 V - 25 A max
N.2 Module with thermal relay for industrial uses with NO-NC auxiliary contacts
N.2 Module with micro switch for industrial uses
N.2 Module with micro switch for industrial uses type MBB
N.2 Module with micro switch for industrial uses type BBM
N.1 Module with four-pole switch keyer 16 A/400 V
N.1 Module with three-pole changeover switch keyer 16 A - 400 V
N.1 Module with three-pole inverter keyer 16 A - 400 V
N.1 Module with star/delta starting keyer 16 A/400 V
N.1 Module with three-pole keyer for Dahlander motors 16 A - 400 V
N.1 Module with three-phase terminal boards for power circuits
N.1 Module with three-phase terminal boards for switching/connecting control circuits
N.1 Module Traffic light unit
Set of Safety Terminals 4 mm 2,5 mm2
SUGGESTED EXERCISES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
controlling a contactor from a point
jogging of a contactor
separate control of two contactors
remote control reverser
remote control reverser with block on push-buttons
remote control reverser with timer
remote control of an elevator (A)
star-delta starting
starting with stator resistors
starting with autotransformer
starting with rotor resistances; exclusion with continuous variation
remote controlled pole-change switch for 2-winding motors
remote controlled pole-change switch for single-winding (Dahlander) motors
reverse current braking
direct current braking
control of a circuit breaker
switch keyer
changeover switch keyer
inverter keyer
star/delta starter keyer
speed switch keyer
control of an elevator (B)
sequence lighting of advertising neon signs
starting with rotor resistances; exclusion with step variation
remote control reverser, star-delta starter
emergency/extra power line
traffi c light system
main control of a crane
OPTION REQUEST
- CONTROL PLC
- MODULES TO REALIZE SIMULATION FAULT IN THE CIRCUIT
The modules are the same modules of the set for industrial installations, modified on their back with the addition of switches to be used to cause
the defects in the circuits. Therefore more than 20 defects can be simulated.
Rev 04.15
8
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
RESIDENTIAL ELECTRIC WIRING TRAINER TYPE T/IMP-R
The trainer consists of a board, approximately 750 x 850mm, on which the map of a typical apartment is drawn and
each room contains the basic equipment required for distribution and utilization of electric power. Each electric
component is accessed through 4mm safety connectors thus making it possible to implement a very large variety of
residential installation circuits.
The apartment has 4 rooms and a balcony equipped as listed below. The components are fixed on the board,
connected to the safety connectors on the back and identified by their symbols printed on the front. Input is 220VAC
and so are the differential switch, the LED lamps and the switch relay.
MOTOR CONTROL SIMULATOR TYPE CONTMOT / SIM
Simulator for motor control panel with synoptic including :
N. 4 contactors, N. 1 thermal relay, N. 4 signal lamps, N. 4 buttons (forward, reverse, stop,
emergency), No 1 tachometer 3 ½ digits with sensor mounted on the motor with two
selectable alarms, N. 1 Three-phase cage induction motor 42V - 200W, N. 1 three-phase
transformer 380/42 V.
It is required a PLC with at least 8 inputs and 8 outputs. The simulator allows to start the
motor star / delta in rotation braking version.
PNEUMATIC ELECTROPNEUMATIC SYSTEM
require dedicated catalogue
STUDY OF THE ROLE OF THE EARTH AND A DIFFERENTIAL
Safety terminals 4mm, located on the front, let the student measure the fault
currents, and insert different resistive modules. These modules simulate two earth
resistance values, and two leakage current values. One module with variable
resistance enables the differential's tripping current to be measured.
Rev 04.15
9
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
STUDY OF THE SINGLE AND THREE-PHASE ELECTRICAL PROTECTIONS
TYPE SIC/EL/PROT
SINGLE AND THREE-PHASE TEST
-
Test on protectors realized by means of fuses and determination of the trip time following currents.
-
Intervention of the protections by thermal relay
Intervention of the protections by magnetic relay
Intervention of the protections by residual current relay
Combination and coordination of types of protection previously mentioned up to
the definition of a thermo magnetic residual current protection
Use of this type of protection in the electrical distribution net.
-
ACCESSORIES FOR ELECTRICAL PROTECTION KIT
- THREE-PHASE ACCESSORY KIT
Set of switches and three-pole contactors:
- Three-pole electromagnetic switch Nominal current 32 A
- Three-pole electromagnetic switch Nominal current 16 A
- Three-pole electromagnetic switch Nominal current 25 A
- Three-pole contactor with thermal relay in = 16 A
- Three-phase differential switch In = 25 A I DIFF= 30 mA
- N. 3 fuses and support
- cable set
- SINGLE PHASE ACCESSORY KIT
Set of switches and contactors:
- Bipolar electromagnetic switch Nominal current 32 A
- Bipolar electromagnetic switch Nominal current 16 A
- Bipolar electromagnetic switch Nominal current 25 A
- Three-pole contactor with thermal relay In = 16 A
- single phase differential switch In = 25 A I DIFF= 30 mA
- N. 2 fuses and support
cable set
EXTRANEOUS MASS
SIMULATOR
TIMER CHRONOMETER
- FRAME WORK
OPTIONS:
SIMULATOR OF
BREAKDOWN TO THE
GROUND
TROLLEY
ANALYSIS OF ELECTRICAL NETWORK, POWER QUALITY, DISTURBANCE AND HARMONICS
TYPE KIT/ANALDIST
The module studies and measures the quality of the electric energy, relief of the harmonicas, takes the relative
corrective provisions to obtain acceptable wave forms for the good working of the electric and electronic
equipment fed by the electrical network. It is possible: realization of the typical circuits, acquisition of the wave
forms: voltage, current, evaluation of the harmonic distortions and the level of the disturbance, use of filters to
simulate troubles or improve the situation after the analysis of the electric energy and the tracking of troubles.
Rev 04.15
10
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
TRAINERS AVAILABLE:
KIT ALREADY INSTALLED OR VERSION INSTALL/ REMOVE
TWO-FAMILY HOUSE PHONE KIT
Two-family installation house phone mounted on panel:
n. 2 house phones, electronic call button
Outside place with N. 2 call buttons
Power supply
Equipped with manuals and exercise
ONE FAMILY HOUSE PHONE KIT
One-family installation house phone mounted on panel:
n. 1 house phone and call button
Outside place with call buttons
Power supply
It allows the audio communication and the opening of the electrical lock.
Equipped with manuals and exercise
TWO-FAMILY VIDEO INTERCOM KIT
Two-family installation video intercom mounted on panel:
N. 2 internal places with flat monitor 4 inches, n. 3 service buttons. Brightness and contrast control.
Outside place with two call buttons, phonic group, CCD video-camera, with sensor 1/3" and infrared
lighting.
Power supply
Video signal switch
Equipped with manuals and exercises
ALTERNATIVE FOR THE REALIZATION OF A ONE-FAMILY SYSTEM:
Equipped with equipment as above described but for one-family use
VIDEO-CONTROL KIT
installation video-control kit mounted on panel:
N. 1 white/black video-camera at high solution
N. 1 objective with automatic diaphragm for video-camera and sensor with brightness zoom lens F1,8
N. 1 monitor 12” Power supply
N. 1 rotary stirrup
Cyclic selector for the switching up to 4 video cameras on 1 monitor
Equipped with manuals and exercises
ON REQUEST
OTHER VERSIONS
TELEPHONE KIT
Composed of several components in industrial version fixed on the frame with piedistallo.Include: kit components: telephone switch comprising
n. 1-2 panels and n. 3-6 handsets, n. 2 phones. Everything is fixed on the module. Each component is provided with a terminal block for easy
wiring of the components by the user. In this way it is possible to assemble and remove the plant in a short time and allow more students to
become familiar in the technical installation by following the wiring diagram and guided exercises attached to the supply.
Rev 04.15
11
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
TESTING PANEL OF ANTI THEFT SYSTEMS
Electronic anti theft control unit
magnetic detectors
micro-switch detectors
passive infrared sensors
volumetric detector of double (IR + microwave) technology
vibration detector
electronic key for remote control of control unit
self-powered outdoor siren
battery
Option
GSM/GPRS modem for remote control via mobile phone
FIREPROOF INSTALLATION TRAINER
installation fireproof kit mounted on panel:
Detector smoke
Temperature detector
Fireproof control unit
Acoustic signaller
percussion sound and light alarm
manual pushbutton of fi re warning
rate-of-rise heat detector
phone dial
Electromagnetic apparatus for fireproof door
TV AND SAT KIT INSTALLATION
The trainer uses equipment which is normally in commerce for the assembly of a system of TV and satellite.
EXERCISES:
Characteristics and operation of components for TV antenna systems: mixers; broad-band, multi-input and channel
amplifiers; filters; converters; power supply units; cables; sockets; shunts; dividers and antennas
• Distribution network: cascade 1 and/or 2 columns, and by nodes
• Single broad-band system; multiple system with band amplifiers, channel converter and with channel and power
amplifiers
• Using equalizing filter
• Using antennas
TV ANTENNA TRAINER
The trainer allows the study of an antenna installation in a palace with 12 flats, 3 floors.
MEASUREMENT INSTRUMENTS:
available various field strength analyser
models for tests on installation TV and sat.
Equipped with manuals and exercises
Rev 04.15
12
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
AUTOMATION FOR SLIDING AND SWING GATES
TYPE CANC/SIM
The trainer includes all the necessary for the working:
• Gate with hinged door and sliding door and accessories
• Opening motors
• Selector
• Control unit
• Flashing light Radio kit (one for type of gate), transmitter,
photocells, complete set of accessories
• Equipped with manuals and exercises
OPTION
• Simulator of breakdowns through micro switch.
On request types only hinged door or only sliding door
BUILDING MANAGEMENT SYSTEM ( KNX BUS )
The wiring installation training system covers planning, installation and testing of an intelligent, bus-capable
installation. Project planning and parameter setting.
Project planning using ETS5 software
Addressing modules
Wiring
Testing
AVAILABLE KNX BUS TRAINER FOR:
•
Residential
•
Commercial
•
Hotel
•
Industrial
INDUSTRIAL INSTALLATION TYPE PANN/IMPI
This system has been designed so that students can assemble, analyze and test a
wide range of more and more complex electric circuits. Main components:
•No. 4 electro-magnetic contactors for industrial uses, with three NO working
contacts, 2+2 NO-NC auxiliary contacts and a coil of 24 Vac
• No. 4 auxiliary relays for industrial uses with 3 exchange contacts and coil of 24
Vac
• No. 2 three-pole thermal relays with NO-NC auxiliary contacts, 3 delayed relays
(1.5 to 30 s) and a coil of 24 Vac
• No. 5 lamp sockets with warning lights of 24 V of different colours
• No. 4 push-buttons of different colours, with NO-NC contacts, for industrial
uses
• No. 1 emergency push-button with mechanical holding and 2 NO-NC contacts
• No. 1 three-phase power supply and distribution unit with neutral and earth
conductors, protected against overcurrents by differential circuit breaker of 6 A,
for powering power circuits
• No. 1 auxiliary power supply unit, protected against overcurrents by
differential circuit breaker of 3 A, for outputting and distributing voltage of 24
Vac for control circuits (single-phase SELV transformer of 72 VA)
• No. 1 fault-insertion system that can be used to insert more than 50 faults on
the devices included in the panel
Rev 04.15
13
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
DISTRIBUTION CABIN - STATE OF THE NEUTRAL - INDUSTRIAL INSTALLATION
TYPE PANN/DISTRIB
The simulator reproduces a typical installation of electricity distribution at low voltage. The system can be configured as TN, TT, IT.
The module simulates distribution cabins medium/low voltage. It includes distribution transformer, breaker, over-temperature, residual current protections, line
protections at output. It allows to study the different states of neutral in low voltage distribution plant. Measuring instrument and remote control for: voltage,
current, power, energy, pf. Complete of software, monitoring and data storage. Measurement of earth resistance, insulation, loop resistance, functionality of
residual current switches, continuity of protection conductor.
EXERCISES:
• study of systems with system TT, TN, IT
• Protection against direct contact; Protection against indirect contact by earthing, electrical
separation, differential circuit breaker; overcurrent protection, selectivity in protection devices
• construction plant and ground conductors
• artificial and natural earth plates
• Monitoring of insulation resistance in isolated systems from the earth (IT)
• protective and sectioning
• analysis of the suitability of materials and equipment used and optimization and project costs
Experiences with the use of instrumentation is not included:
• identification of the neutral conductors and earth
• evidence of continuity of protective conductors
• analysis of functionality differentials
• verification of protection with automatic disconnection
• measurement of earth resistance
• measurement of insulation resistance
• measurement of the resistance / impedance of the fault
• Current measurement of the first earth fault in isolated systems
EDUCATIONAL KIT FOR STUDYING OF THE INSTALLATIONS AUTOMATIC POWER FACTOR
TYPE PANN/RIFAUT
The module allows you to make teaching experiences on industrial installations that use electronic devices
to control the power factor of electric utilities in low voltage (400 V). The panel is equipped with safety
terminals and clear synoptic that allows to create experiences related to automatic power factor correction
circuits with different capacitive steps controlled by an electronic control unit. Includes two energy
analyzers which measure: voltage, current, active reactive apparent power, power factor in a single-phase
or three-phase systems, with or without neutral.
EXERCISES:
measurements and relationships between the apparent, active, reactive power
power factor correction of localized single-phase electric utilities
power factor correction of localized three-phase electric utilities
discharge of the energy stored in the capacitors
automatic centralized power factor correction systems with 1-2-3 steps equal
automatic centralized power factor correction systems with 1-2-3 steps one double of other
filtering of harmonic currents in the capacitors.
OPTION SCADA CONTROL
OTHER TRAINERS:
TRAINER MEDICAL INSTALLATION
TYPE MEDICAL / SIM
The trainer allows learning the techniques of verify and measure in medical
installations. The trainer is an electrical installation in medical rooms. Included
simulation of a breakdown with dispersion of d.c. current to the ground and the
comparison between differential type A and AC
TRAINER AGRICULTURAL AND ZOOTECHNICAL INSTALLATION
TIPO ZOOTEC / SIM
The trainer allows learning the techniques of verify and measure in agricultural and zoo technical installations. The trainer is an electrical installation. Included
simulation of a breakdown.
Rev 04.15
14
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
RESIDENTIAL INSTALLATION TRAINER TYPE CIVILTEST
The trainer of residential installation type CIVILTEST allows studying the electrical installation as wiring, measurements and certification. CIVILTEST was realized
with the purpose to train the students to the installation, the test and the certification of residential electrical installation. The equipment allows to create a
residential electrical installation, which simulates the real electrical installation of a house, make the controls and the measurements regarding the performances
and the electrical security according to the standards CEI 64-8 and the law 46/90 and issue the relative certification. The trainer is divided into 2 sections in a
mobile station.
POWER SUPPLY SECTION
Power supply cable, Differential thermo magnetic general switch to high sensitivity, indication red lamp voltage. Mono-phase meter to induction 16 A / 250 V,
Thermo magnetic switch range 10 A complete of differential to high sensitivity 30 mA, Line simulator equivalent about 20 mt of cable having section 2.5 mm
thermomagnetic switch range 16 A complete of differential to high sensitivity 30 mA. Box of derivation for installation sectioning. Earth resistance simulator
equipped with switches 1-2-3-4 for earth resistance value setting.
ELECTRICAL INSTALLATION SECTION
- N. 6 boxes of derivation for installation sectioning and measurement instrument insertion.
- N. 6 plugs for connection outside loads additionally to on board loads
- Internal load power 500W to simulate the household appliance loads etc. ... ...
- Cooling fan placed on the back.
- Differential high sensitivity (10 mA) for environment protection to bigger risk.
- N. 3 internal incandescence lamps.
- Halogen lamp 12 V 50 W equipped with transformer and electronic brightness regulator.
- Fluorescence lamp
- Simulator of insulation resistance with switch to 4 positions for isolation resistance value setting.
On the 2 sections it is possible to create a residential electrical installation, inserting the household appliances, the
light oints etc.. . and everything required. The teacher, through the suitable switches, can set up some values of earth
and unknown insulation to the student
Use of the measurement instrument for the various tests and the suitable software for the certification:
- Verify of the continuity of the protection conductor
- Earth resistance measure
- Breakdown ring resistance measure
- insulation resistance measure
- Verify of the drop of voltage in an installation
- Power factor correction
- Verify of the functionality of the differentials
- etc.. . etc.. . depending on the teaching methodology .
Included user manual
OPTIONS
•
steep load single-three phase RLC from 1 KW to be added to the load already included in CIVILTEST to increase the loads that simulate household
appliances etc.. .
•
Multifunction instruments for measurements and tests
•
Software installation certification
•
AVAILABLE OTHER SIMULATORS COMPATIBLE WITH THIS SIMULATOR FOR ANY EXPANSIONS
BUILDING YARD TRAINER TYPE EDILSIM
The trainer included:
Distribution electrical panel board with: meter, general switch, no. 3 lines with relative switches
System analysis TT-TN-IT
Various section distribution lines and length of cable.
Plugs from yard of several type
Direct and indirect contact protection analysis
Bent for the fundamental measure of the tensions of step and contact
Earth installation
Insulation and continuity measures
Switch for breakdown simulation and consequent research.
NOTE:
The simulator is equipped with switches, which allow the teacher to modify at pleasure the earth and the insulation
of the installation.
Rev 04.15
15
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
INDUSTRIAL ELECTRICAL INSTALLATION TRAINER
TYPE INDUSTRIALTEST
The trainer of industrial installation type INDUSTRIALTEST allows studying the electrical installation as wiring, measurements and certification. INDUSTRIALTEST
was realized with the purpose to train the students to the installation, the test and the certification of INDUSTRIAL electrical installation. Total power 5 KVA
The simulator included 4 sections:
SIMULATION AVERAGE VOLTAGE / LOW VOLTAGE CABIN
Power supply cable, four pole meter inserted on the input power line (manoeuvre switch or isolator under load), Fuse 25 A, Transformer
SECTION DISTRIBUTION
Box of selectable derivation with cables, General thermo magnetic switch with differential relay and adjustable current from 4 to 6,3 A, N. 2 thermo magnetic
four-pole switches with nominal current 6 A and differential relay, N. 2 thermo magnetic bipolar switches with nominal current 2 A to and differential relay
LINE OF DISTRIBUTION SIMULATOR IN CABLE
Three-phase line L1 - Three-phase line L2 - single phase line L3 (offices) - single phase line L4 (lighting)
LIGHTING INSTALLATION
- N. 3 Incandescence lamps power 60 W cad each and a fluorescence lamp power 20 W with switches.
Simulates 3 fundamental types of installation : TN - TT - IT
The user manual guides the user in the various suggested tests and the total knowledge of the equipment.
Test:
- Verify of the continuity of the protection conductor
- Measure of the earth resistance, resistance of the ring, insulation resistance
- Verify voltage drop in a single phase installation, verify voltage drop in a three-phase installation
- Verify of the behaviour to the unbalanced loads
- Power factor correction of a single-phase circuit
- Calibration of the differential relays
- Verify of the functionality of the differential interrupter, selectivity for high currents, selectivity for over currents.
OPTION
•
•
RLC single and three phase load 3KVA
Instruments for measurements and tests CA6115 (see data sheet)
TRAINER OF CABIN OF DISTRIBUTION WITH OR WITHOUT PC
TYPE SIM/CAB/DIST
The trainer simulates an average voltage / low voltage cabin having installed two transformers with power 630 KVA ( virtual
30 KV ) The factor is 1/1000.
All the components of the typical distribution cabin are included. In particular:
•
Interlocked three-pole isolator with earth isolator
•
Automatic switch with control on the average voltage
•
Connector of bars to connect the transformers in parallel
•
Panel board of manoeuvre and protection with relay of breakdown earth
•
Advanced digital instrumentation (Option equipped with interface to pc and software) measure of voltage, current,
powers, energy
•
Panel microprocessor transformer control with over temperature and alarm.
•
Possibility of changing the transformer connection and the output voltage verifying the load sharing
•
Arranged for measure of resistance of earth and voltage of step and contact
•
Three phase power supply + N + T
Included manual and exercises.
USE OF ENERGY IN RESIDENTIAL INSTALLATION
TYPE PANN/CIVIL
The module simulates the conditions of a civil residential installation. It includes: digital energy counter with display for
measurements of electrical, consumption and tele-metering parameters. Advanced functions as double-hour tariff, analysis
of consumption and systems to take off loads in case of overload. Measurement of earth resistance, insulation, failure
ring, functionality of residual current switches, continuity of protection conductor.
Available both in separate modules kit or full assembled simulator.
OPTION: some examples of residential Domotics.
Rev 04.15
16
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
POWER SYSTEM SIMULATOR
PSS MODULE
This innovative system is composed by different autonomous simulators studied to work in serial connection or alone.
With this system it is possible also to study the level of the quality of the electrical networks, harmonics and with
implementation electrical and magnetic field at 50 and 60 Hz. The system is controlled with SCADA
This simulator includes:
Module – GENERATION
POWER GENERATION SIMULATOR
Module – TRANSMISSION
TRANSMISSION LINE SIMULATOR – HV
Module – DISTRIBUTION
DISTRIBUTION AND SUBSTATION SIMULATOR
Module - PROTECTION SYSTEM UNIT
MODULE RELAY TO BE USED WITH OTHER MODULES
Module - ENERGY UTILIZATION
STATIC AND DYNAMIC LOADS AND NETWORK EQUIVALENT, ALONG
WITH ALARM
SCADA (option)
The system is controlled and displayed with SCADA
PC WORKSTATION (option)
to view and control the system using SCADA
Power supply 230/400V 50Hz
The system is supplied in the solution that includes SCADA or without the control from SCADA
FOR DETAILS REQUIRE BROCHURE DEDICATED
Rev 04.15
17
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
CYCLE OF THE ENERGY AND QUALITY OF THE ELECTRIC ENERGY
Series of modules and instruction manuals with suggested experiences. The modules are equipped with points of measure through safety terminals
to help the students during measurements and guarantee high level safety. The levels of voltage and power of the modules 1 … 6 are coordinated to
allow the coupling of all the modules and allow the simulation and the study of the complete cycle of the energy.
MODULE 1: PRODUCTION OF THE ENERGY TYPE CE-PE/2
The module simulates a plant for the production of the energy. It is possible:
parallel with the net, generation of active and reactive power. The production
mechanism is faithfully simulated and does not need any rotating motors. It
includes the principal electric protections of a plant and a multifunction
instrument for measures.
MODULE 2: TRANSMISSION OF THE ENERGY TYPE SLE/2
The module simulates two high voltage lines. Study of the lines working at noload and at load, change of voltage, voltage drops, losses in line, fluxes of
active and reactive power, phasing, parallel connected lines. As option, it is
available a kit for EMC study at 50 Hz.
MODULE 3: DISTRIBUTION OF THE ENERGY TYPE IDLE/3
The module simulates a medium voltage line. It includes power supply, line
model, distribution transformer. Study of the line working at no-load and at
load, change of voltage, voltage drops, losses in line, fluxes of active and
reactive power, phasing. Analysis of convenience to carry energy at high
voltage. As option, it is available a kit for EMC study at 50 Hz.
MODULE 4: PROTECTION RELAY TYPE RE/1 AND RE/2
RE/1 Protection of machinery and power lines from overload, short circuit,
earth fault
RE/2 Protection of lines and power transformers in radial and ring systems
from undervoltage, overvoltage, overcurrent, residual overcurrent, residual
overvoltage, maximum directional current, directional of earth fault, thermal
image for lines and transformers.
MODULE 5: PHASE SHIFTING TRANSFORMER TYPE PST/1
Phase Shifting Transformer is a transformer that has an adjustable phase
shifting between input and output. The active power flowing in a transmission
line is proportional to the voltages on the sending and receiving side and to the
sine of the electrical angle between both sides. The PST allows to control
active power flow in parallel transmission lines changing the electrical angle
between input and output.
With SLE/2 and PST/1 the student can simulate a load flow problem shifting
active power from the first line to the second.
MODULE 6: PARALLEL OPERATION OF ALTERNATOR
The module includes alternator coupled to a.c. motor, inverter to adjust
speed of the motor and dc power supply for excitation of alternator. The
module allows synchronizing and parallel operation of rotating machine with
infinite power bus.
After the parallel operation it is possible to adjust mechanical power of the
motor and excitation current of the alternator to generate and transfer to
bus active and reactive power.
Rev 04.15
18
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
RENEWABLE ENERGY
Series of modules and instruction manuals with suggested experiences. The modules are equipped with points of measure through safety terminals to help the
students during measurements and guarantee high level safety.
STAND ALONE PHOTOVOLTAIC SYSTEM
TYPE KIT/SOLAR
Typical installation for isolated houses.
The trainer includes: N. 2 solar panels mounted on adjustable stand; N. 1
synoptic panel; N. 1 unit load controller for solar panels; N. 3 ammeters
connected digital panels, battery and load; N. 1 digital voltmeter connected to
the load; batteries; Cables
On request computer interface
PHOTOVOLTAIC SYSTEM TEACHING FOR THE STUDY OF SOLAR – stand-alone version TYPE SIMFVIS/C
The kit includes:
• N.2 solar panels 12V 25W mounted on tilt stand to adjust the lighting angle and study the condition of maximum efficiency of panel
• N.1 box with clear synoptic including: unit load regulator for solar panels; N.3 digital ammeter connected to the battery and load
N.1 digital voltmeter connected to the load; N.1 digital voltmeter connected on solar panels
• N.2 Batteries suitable plant for series and parallel connections
• Adequate number of connecting cables
GRID CONNECTED PHOTOVOLTAIC SYSTEM
TYPE SOLAR/GRID
Trainer with solar panels to analyze the process of conversion of the solar energy in electric energy.
The trainer includes: dc power supply signed Photovoltaic generator, inverter solar 'grid connected'
power 200 W; N. 2 multifunction instruments for measuring voltage, current, electric power and energy
at mains voltage; interface to the computer; modules for connection utilities; modules for dc voltage
and dc current measurements; adjustable stand for modules; cables; software.
Separate power supply allows to study DC/AC conversion and grid connection without use solar panels.
On request computer interface
OPTIONS
- lamps for indoor use photovoltaic panels
- pyranometer, solar power meter or instrument certification for photovoltaic systems
- acquisition tool for electrical parameters with numeric and graphic display interface
and the APR / FR-ARM
- inverter to obtain alternating current
- software
OPTION FOR TYPE SIMFVIS / C
WIND TURBINES 60W TYPE SIMEOL60
Complete set up the trolley SIMFVIS / C
Use the same unit and components
Rev 04.15
19
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
SIMULATOR OF PHOTOVOLTAIC SYSTEMS ( STAND-ALONE AND GRID
CONNECTED ) TYPE KIT/SIM-IF
The student can simulate the inputs parameters ( solar radiation, battery charge, ac power, solar
panel angles, date and hour ) using analog potentiometers.
The simulator calculates the output parameters like solar panel voltage and current, battery voltage
and current, inverter input and output current and power.
The output parameters are visible on four digits precision instruments.
Fully configurable simulation software.
The simulator requires PC connection via USB cable.
KFV – LOW COST PHOTOVOLTAIC TRAINER
Complete program of experiences which enable students to learn the main characteristics of solar
radiation and of photovoltaic conversion process. 1 pyranometer with bar for shadow projection. It
includes : digital milliammeter and voltmeter, load rheostat, 3 different solar cells, portable compass,
manual solar tracking system, accumulator, d.c. motor, solar ruler, user manual.
FUEL CELL TRAINER
Fuel Cell Kits are designed to study concepts based on PEM Fuel Cell
technology. Consisting of solar module, PEM electrolyzer, hydrogen and
oxygen storage tanks, PEM fuel cell and fan (for electric load); mounted on a
black base plate. Textbook included.
NO PRESSURE THERMAL SOLAR SYSTEM WITH HEAT STORAGE
FOR RESIDENTIAL HOUSE SPACE HEATING
Solar heater is made of parallel rows of transparent glass tubes. Each tube
contains a glass outer tube and metal absorber tube attached to a fin. The fin
is covered with a coating that absorbs well solar energy, but which inhibits
radiative heat loss. Air is removed from the space between the glass tubes and
the metal tubes to form a vacuum, which eliminates conductive and
convective heat loss. A well-insulated storage tank stores hot water. The
system uses a pump to circulate household water through the collectors and
into the home.
Peltier cell trainer
This cell allows you to convert thermal energy into electrical energy, and vice
versa.
Box with 2 peltier cells and fan. Power supply , manual controller, n° 2 digital
thermometers. User manual
Rev 04.15
20
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
WIND POWER GENERATOR TYPE SIMEOL200
This equipment represents the typical confi guration of a wind power
generator, used to convert directly the wind kinetic energy into
mechanical energy.
Included experiences : Study of wind energy: calculation of the
average power developed by the wind on a specific place; The wind
power generator: typical structure; installation; orientation;
“Brushless” generator; Study of the voltage regulator according to the
variation of the wind speed and energy conversion; storing energy;
Typical applications; charging batteries.
Included: wind power generator 400W with trolley (on request 200W
TYPE SIMEOL200)
Rated power: 400 W Startup Wind Speed 3,6 m/s Rotor Diameter 1.17
m Voltage 24V (on request 12-48V) Turbine Controller
Microprocessor-based smart internal regulator Body Cast aluminum
Blades Injection-molded composite Alternator Permanent magnet
brushless Electronic torque control
Control panel containing: load regulator, digital ammeter, digital
voltmeter, battery
THEORETICAL-EXPERIMENTAL MANUAL
OPTION; lamp for load with insertion by switches; digital instruments
A-V- W-VAR- Wh- VARh- cosØ for single and three-phase
measurements type APR-FR/ARM2 with interface – software –
harmonics ; inverter; software, anemometer ; clamps
On request computer interface
SYSTEM FOR INDOOR OPERATION OF WIND
POWER GENERATOR TYPE KEOLSIM
Motor with speed regulator and adapter to be installed in place of the
turbine blades for generator operation in windless environment. This
system, coupled to an asynchronous motor, enables to power the
wind turbine (which is not part of this system; the blades must be
removed before use) indoors.
Determining the power output by the turbine with the instruments.
The system is supplied with an inverter for
r.p.m. control of the motor
OTHER VERSIONS
same characteristics shown above but
TYPE SIMEOL90 wind power generator 90W with trolley
TYPE SIMEOL60 wind power generator 60W with trolley
You can use 60W typical fan to simulate the wind
Rev 04.15
21
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
SOLAR WATER PUMPING STATION
Type SM / POMPSOL
Solar pumping station completely autonomous. The system
allows students to understand and analyze its operation.
Photovoltaic solar panel mounted on a chassis with variable
inclination. Output terminals. Connecting cable. Tank that
simulates the source of water under the ground. Transparent
tank for water storage pumped. Tap that simulates the
consumption of the user with the return water to the tank.
Pump of adequate size. Batteries to power the pumping
station when the sun is no longer present. Controller battery
charge.
Miniature hydroelectric power generation with Pelton turbine, pump and
instruments.
Computer wi-fi interface available.
The trolley kit includes:
Stainless steel tank capacity 140 liters
Pelton turbine with generator
electric pump
Variable speed drive for electric
Flow Transmitter
Pressure transducer
n. 1 RF converter / USB to connect to the USB port of the PC
n. 1 sinotticato panel comprising:
switch differential thermal
Emergency button
Section adjusting power pump with switch START/STOP switch,
ENABLE/RESET
n. 5 digital instruments, with indications of turbine rotation speed, pressure, flow, output voltage, output current. The instruments
are equipped with internal module for wireless data transmission Complete with software for experiences.
OPTION: trolley for instruments and other accessories
Energy saving kit type KRE
Kit analysis and study of energy saving. Trainer kit to investigate and study the concepts of
applications based on energy saving in industrial and residential systems.
Includes:
N. 1 Module with n.3 lamps E26
N. 1 Module simulation single-phase system
N. 1 Module halogen lamp 230V 75W
N. 1 Module incandescent lamp 230V 75W
N. 1 Module fluorescent lamp and low-consumption light output equivalent to a 75W
incandescent bulb
Connection cables
The kit proposes the study of energy saving applied to a lighting system. In particular compare a lighting system with traditional incandescent
lamps and lamps "energy saving" low consumption. Both systems offer the same luminous flux (neglecting the color tone) and can be regarded
as equivalent. The comparison will highlight the various technical aspects and costs. The module is a lighting dummy with an installed capacity of
about 7500W (incandescent).
OPTION: digital instruments A-V- W-VAR- Wh- VARh- cosØ for single and three-phase measurements type APR-FR/ARM2 with interface –
software – harmonics
Rev 04.15
22
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
HOME AUTOMATION SYSTEM FOR STUDY AND EXERCISES
HOME AUTOMATION SYSTEM MODULAR STRUCTURE
RESIDENTIAL VERSION Simulator type DOMOCIV
EIB-BUS SYSTEM (on request are also available proprietary
systems, industrial systems, hotel and commercial systems)
The traditional domestic electrical circuit is replaced by a programmable logic system that allows you
to manage each user with flexibility and comfort unthinkable in a traditional system. The system
transforms each command in a point of intelligent control capable of bringing together all those
actions that are usually carried out separately.
The simulator includes:
- Frame with perforated plate stand with DIN rail for easy mounting of the modules (optional trolley
for easy movements of the structure in the laboratory eventually with cabinet)
- Software and system control KONNEX EI-BUS
- Modules an insulating material with clear synoptic component for easy and immediate
understanding of the function, component typical industrial leading brand mounted on the module
and built for wiring safely. Complete rules terminals for wiring with the other modules by means of
cables standard laboratory 4 mm with respect to the power line. For bus line terminals 2mm, for
added security and protection against accidental connection with the power line. With this solution
you can not make mistakes in the wiring between the line power and BUS. System is flexible and
expandable with future upgrades offered by the market without problems.
- Wiring fixed on the frame, user manual and tutorials that help the user in performing the tests.
STUDY PROGRAM:
The system includes a series of modules each containing the industrial component mounted in a container with display diagram for the understanding of the
use of the module and with standard terminals for easy wiring and ensure maximum safety. Possible to study the electrical installation of a home automation
system BUS KONNEX of residential home.
ADVANTAGE OF THE SYSTEM PROPOSED:
students learn bus programming and also learns the wiring using different power cables (2 and 4 mm) that highlight the power line and the line BUS. The
programming and wiring is a formative important points for the installation of an electrical installation.
SET ENTRY: basic component necessary for the use of automation components required:
-
N.1 MODULE Power type 90709
POWER ELECTRONIC SELF-PROTECTED 110V / 240V - 50 / 60Hz - IP20 - 320mA Output voltage 30 V dc +/- 2 V (SELV)
type DOM001 / ALB electric module with data strip for connecting power supply and components
-
N.1 MODULE interface USB type 90706B
INTERFACE KNX/USB for PC connection type DOM002 / USB
- N. 1 MODULE INTERFACE CONTACT 4 CHANNEL EIB Type 90721
CONTROL LIGHTS SOCKETS
ON/OFF
N. 1 MODULE actuator general loads Type 90835
4 CHANNELS 10A PROGRAMMABLE INDIVIDUALLY type DOM 003 / TU 6 A 230 VAC for the activation of
the users with bus coupler
DIMMER
N. 1 MODULE UNIVERSAL DIMMER
ACTUATOR - EASY - 500 VA Type 90849
MODULE SIMULATOR
N. 1 module setting various different scenes on 4 lamps type DOM099 / SCEN
Rev 04.15
23
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
SENSOR BRIGHTNESS 'AND MOVEMENT
N. 1 MODULO detector movement and brightness type 10756
Light-sensitive IR
CONTROL ROLLING SHUTTERS
N. 1 MODULE actuator for rolling shutters type 90851
n. 2 motors including - raise / lower buttons
N. 1 MODULE rolling shutter miniaturized
Included proximity sensor.
HEATING AND AIR CONDITIONING
N. 1 MODULE CHRONOTHERMOSTAT Type 10761
N. 2 MODULO THERMOSTAT Type 10763
TECHNICAL ALARMS
N. 1 MODULE WATER SENSOR - TRANSMISSION IN RADIO FREQUENCY - BATTERY 9V Type 12718 + N. 1 MODULE WATER
PRESENCE DETECTOR MODULE Type 10716
N. 1 MODULE METHANE GAS DETECTOR
SET ANTI ANTI THEFT SYSTEMS
SMARTPHONE AND TABLET CONTROL Type SM6500-113
N.1 MODULE gateway KNX connects Type SM6500-113
the KNX system to the IP network.
MODULE 4
keypad buttons
SOFTWARE KNX KONNEX
Rev 04.15
24
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
INDUSTRIAL BUILDING AUTOMATION
Type DOMOIND
The simulator includes:
- Frame with perforated plate stand with DIN rail for easy mounting of the modules (optional trolley for easy
movements of the structure in the laboratory eventually with cabinet)
- Software and system control
- Modules an insulating material with clear synoptic component for easy and immediate understanding of the
function, component typical industrial leading brand mounted on the module and built for wiring safely. Complete
rules terminals for wiring with the other modules by means of cables standard laboratory 4 mm with respect to the
power line. For bus line terminals 2mm, for added security and protection against accidental connection with the
power line. With this solution you can not make mistakes in the wiring between the line power and BUS. System is
flexible and expandable with future upgrades offered by the market without problems.
- Wiring fixed on the frame, user manual and tutorials that help the user in performing the tests.
COMMERCIAL BUILDING AUTOMATION
Type DOMOHOTEL
The simulator includes:
- Frame with perforated plate stand with DIN rail for easy mounting of the modules (optional trolley for
easy movements of the structure in the laboratory eventually with cabinet)
- Software and system control
- Modules an insulating material with clear synoptic component for easy and immediate understanding of
the function, component typical industrial leading brand mounted on the module and built for wiring safely.
Complete rules terminals for wiring with the other modules by means of cables standard laboratory 4 mm
with respect to the power line. For bus line terminals 2mm, for added security and protection against
accidental connection with the power line. With this solution you can not make mistakes in the wiring
between the line power and BUS. System is flexible and expandable with future upgrades offered by the
market without problems.
- Wiring fixed on the frame, user manual and tutorials that help the user in performing the tests.
The traditional electrical system of a hotel is replaced by a programmable logic system that allows you to
manage the hotel and rooms with a flexibility and comfort unthinkable in a traditional system. The system
turns every command in a point of intelligent control capable of bringing together all those actions that are
usually carried out separately.
The system consists of:
• a camera module
• a room panel
• a temperature sensor NTC
• a transformer with 12V ~ secondary 5VA
• an outdoor panel comprising a transponder reader for controlling access to the chamber and a
series of LED signaling
• a badge holder with active antenna integrated read
Rev 04.15
25
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
SOLDERS AND DESOLDERS
accessori vari per saldatura
CASES WITH TOOLS FOR ELECTRONICS
LABORATORY'S CABLES (suitable security rules) + RACK FOR CABLES
AVAILABLE COLOURS: red, black, yellow, green, yellow-green, blue
LENGTHS: 25 - 50 - 100 - 150 - 200 cm
WORKING VOLTAGE: 1000 V CAT III
TEST : 7400 Vrms lasted 1 minute TRACTION: 150 N
CURRENTS: versions from 16 - 20 - 30 A (on request other versions)
CABLE: PVC section 1 or 1.5 or 2.5 mm2 (on request other sections)
TEMPERATURE: 70 °C
DIAMETER: 4 mm On request other diameters
rack for cables
On request
POWER SUPPLIES
Rev 04.15
26
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
STANDARD INSTRUMENTS
The proposed instruments are an example of the various available combinations:
•
•
•
•
•
•
•
•
Analogue professional types in typical bakelite case and digital versions
Analogue and digital types in plastic case
Analogue and digital type in aluminium case for use on the desk or vertical
with possibility of plug-in insertion in the suitable support structure
GENERAL TECNICAL CHARACTERISTICS FOR INSTRUMENTS
DC, AC, DC and AC use
Type of instruments: ammeter, voltmeter, wattmeter,
varmeter, frequency-meter, power factor meter etc..
Some models are supplied with RS232 interface, digital
instruments with option wireless
Ranges: to be defined 1, 2, 3, 4, 5 …. ranges
Instruments precision: 0.2 – 0.5 – 1 – 1.5 – 2 – 2.5 - …..
We are at disposal to quote the configuration you wish / certificate of calibration included
ELECTRONIC INSTRUMENTS
- Multimeters, portable or bench with and without interface
- stabilized power supplies single dual triple with and without
interface
- Analog and digital oscilloscopes various range
- Function generators
- Spectrum analyzers
- Logic analyzers
- frequency
- Current clamps capacitance meters
- Various analyzers
Rev 04.15
27
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
AVAILABLE MANY DIFFERENT RANGES ON REQUEST
AMMETERS, VOLTMETERS, WATTMETERS, VARMETERS, PHASEMETERS, FREQUENCY-METERS
Accuracy 1 – 1.5 - 2 – 2.5 %
AMMETERS, VOLTMETERS, WATTMETERS, VARMETERS, PHASEMETERS, FREQUENCY-METERS
Full range of instruments for dc and ac use with several ranges and precision
Digital instruments in plastic case
Accuracy 1 – 1.5 - 2 – 2.5 %
AVAILABLE R232-USB-WIRELESS VERSION
Terminals with concentric profile according to safety rules.
DOUBLE DISPLAY DIGITAL AND ANALOGUE
Low cost energy analyzer type APR/FR
Measure of electrical parameters in a single-phase and three-phase networks. From 0 to 500 V and from 0 to 6 A multirange (8 for
voltage, 8 for current)
• simultaneous acquisition of: RMS voltages, RMS currents, frequency, cosφ, powers, energies, THD…
• in field configuration of CT and VT ratios for direct values reading (automatic selection engineering units)
• a single device for all type of connection: single-phase, three-phase with 2 CT (ARON), three-phase with 3 CT
• automatic change of groups of measures
• averaging with selectable response time
• addressable RS485 serial output on request
Auxiliary power supply 230 V AC
analogue and digital type in aluminium case for use on the desk or vertically with
possibility of plug-in insertion in the suitable support structure
Display:
On
request:
3 orshunt
3 ½ or/4current
or 4 ½ and
digits
voltage transformers
•
•
•
AVAILABLE TYPES:
• Moving coil
Moving iron
Dynamometer
Electronic
Digital type with display: 3 or 3 ½ or 4 or 4 ½ digits
Available interface wireless or USB for digital type
Full range of instruments for dc and ac with several ranges and precision
Rev 04.15
28
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
CONTROL ELECTRIC MOTORS
DC MOTOR CONTROL
TYPE REG/CC
ELECTRONIC MODULE OF SPEED ADJUSTMENT IN D.C.
SYSTEM OF MOTOR CONTROL FOR D.C. COMPOSED BY SPEED CONTROL BOARD FOR SERVOMOTOR OF LATEST
GENERATION
Suitable for motor 200 W or 1KW
Versions with different powers are available on request.
Sizing of the actuator and of the motor in function of the dynamic characteristics of the
load
Speed control in open loop.
Speed control for operation in armature feedback
Speed control in closed loop .This is possible only by means of a d.c. motor with tacho
generator with 10 V output at max speed (not included)
Issues of stability and control PID parameters
Drives and safety
Drives and electromagnetic compatibility. Design to ensure compliance with EC
Standards.
Reduction of emissions through filters.
Ramp speed control.
Power supply: single-phase 230 V d.c
Speed: 3000 rpm
A4240 - DC COMPOUND EXCITATION MACHINES
This is a series of educational motors/generators that are basically industrial models especially equipped to be suitable for training. For this purpose the windings
ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily
understand operation and windings connections. The machine has two excitation windings: one for series and one for shunt excitations.
The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of
accessories and a joint allow easy and quick coupling with other machines or with a brake.
TECHNICAL AND ORDERING INFORMATION
Model N.
Motor Input Voltage
Generator Output Voltage
Volts DC*
Excitation
Voltage
Volts DC*
Nominal Speed
RPM**
Nominal Motor Power
Approx. KW
A4240S
220
220
3.000
0,2***
A4240M
220
220
3.000
1,0
Industrial version is available. Add I to Model Number
Kit version is available. Add K to Model Number
Cutaway models are available. Add C to Model Number
* 230 or 240V or other voltages are available. Specify on Order.
** 1.500 RPM are available and can be quoted on request. Add 4 to Model N.
*** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request.
NOTE: Powers are indicative and reflect the ranges of the industry standards
AVAILABLE
A4242 - DC SERIES EXCITATION MACHINES
A4244 - DC SHUNT EXCITATION MACHINES
Rev 04.15
29
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
AC MOTOR CONTROL
TYPE REG/CA
ELECTRONIC MODULE OF SPEED ADJUSTMENT IN A.C. OPEN AND CLOSED LOOP
System composed by an inverter of latest generation that is able to manage the motor in all its controls.
The installation of the sensors on the motor is not necessary
Suitable for motors of 200 W.
Versions with different powers are available on request
Experiences that can be made:
Speed control motor in open loop by adjusting the supplied frequency.Speed control
in open loop with the slip compensation.
Self calibration (the converter automatically acquires the motor’s parameters)
Speed control in closed loop (only with a.c. motor with tacho generator with 10 V
output at max speed not included), PID parameter setting, issues of stability
The motor to be tested is protected automatically: by means of current limitation and
by
means
of
thermal
image.
Braking
by
means
of
d.c.
current
Drives and safety cautions. Designing of safety system.
Drives and electromagnetic compatibility. Design to ensure compliance with EC
Standards. Reduction of emissions by filters.
Ramp speed control.
Supplied with RS-485 output and software. Power supply: three-phase 380 V
The motor to be tested is protected automatically: by means of current limitation and by means of thermal image.
Braking
by
means
of
d.c.
current
Drives and safety cautions. Designing of safety system.
Drives and electromagnetic compatibility. Design to ensure compliance with EC Standards. Reduction of emissions by filters.
Three-phase asynchronous cage motor (on request)
Power 200 W -Speed 3000 rpm
Star/delta connection
A4220 - SQUIRREL CAGE THREE PHASE MOTORS
This is a series of educational motors that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are
connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily
understand operation and windings connections that can be configured for STAR or DELTA schemes. The units can be supplied with an experiment manual which
explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other
machines or with a brake.
TECHNICAL AND ORDERING INFORMATION
Input Voltage Freq. Nominal Speed Nominal Power
Model N.
Hz
Approx. RPM* Approx. KW
Volts (∆/Y)
A4220S
220/380**
50
3.000
0,2***
A4220AS
127/220
60
3.600
0,2***
A4220M
220/380**
50
3.000
1,1
A4220AM
127/220
60
3.600
1,1
Industrial version is available. Add I to Model Number
Kit versions are available. Add K to Model Number
Cutaway models are available. Add C to Model Number
* Four Poles Motors are available. Add 4 to Model N. (Ex.
A4220AS/4)
** 230/400V and 240/415V are available. Specify on order
*** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request.
NOTE: Powers are indicative and reflect the ranges of the industry
standards.
Rev 04.15
30
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
Brushless motor and control
Didactic Kit that consists of a three-phase brushless motor with dedicated drive. The motor can be removed
from the holder and mechanically coupled to a load. Max RPM: 4000
Rated Torque: 0.0625 Nm
Maximum torque: 0.19 Nm
The three-phase brushless motor has three stator windings connected in delta and comes complete with hall
effect sensors that provide information on the position of the rotor. This type of motor has excellent torque
characteristics, low inertia and possibility of strictly constant speed. For operation it is necessary to add only a
stabilized power supply 30 V - 5 A, the kit comes complete with knobs, switches and cables.
B3510-W – LINEAR MOTOR
The B3510-W module includes an on-board stepping linear actuator and the
electronic drive circuit to allow the experimentation and investigation of the basic
characteristics of the motor. The motor is provided with a position indicator, this
facilitates the study of motor positioning, take-in point, loss of step. The electronic
section includes a phase-signal generator and power drive stage. The motor can be
operated manually in single-steps or sequentially from an on-board clock generator.
The module also includes a PC data link for full remote operation. A software package
is provided with the trainer for this purpose. The clear component layout and rugged
construction renders this unit particularly ideal for the most demanding of classroom
conditions.
Features: Small-size linear motor; Power drive; Phase-signal generation from a PC
through a data link; Manual operation in steps or continuous mode, by means of an
on-board adjustable frequency generator. The B3510-W module comes complete with
a connection cable kit, 2 software packages and an extensive instructions manual.
Experiment and study subjects: Construction and functional characteristics of stepby-step motors; Full-step and half-step operation; Control diagram developing; Driver
logic developing; Remote control; Operation at various speeds
The B3510-W requires a +15 stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules.
Optional accessories: Dual trace oscilloscope; multi-meter; Frequency meter
B3510-T – STEPPER MOTOR CONTROLS
The B3510-T module includes the step-by-step motor and the electronic drive
circuit, to enable the experimentation and investigation of the SXS control
technique and the typical characteristics of these motors. The motor is provided
with a shaft position indicator. This facilitates the study of motor positioning, takein point, loss of step. The electronic section includes a phase-signal generator and
power drive stage. The motor can be operated manually in single-steps or
sequentially from an on-board clock generator. The module also includes a PC data
link for full remote operation. A software package is provided with the trainer for
this purpose. The clear component layout and rugged construction renders this unit
particularly ideal for the most demanding of classroom conditions.
Features: Small size step-by-step motor; Variable-frequency clock generator;
Phase-signal generator; Manual or sequential operation; PC interface for remote
operation
The B3510-T module comes complete with a connection cable kit, 2 software
packages and extensive instructions manual. The two software packages are
respectively running under DOS and Windows operating systems, on IBM or
compatible machines.
Experiment and study subjects: Construction and functional characteristics of the step-by-step motor; Full and half step operation; Control diagram developing;
Driver logic developing; Remote operation under PC control; Operation at various speed
The B3510-T requires a +15 stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules.
Optional accessories: Dual trace oscilloscope; multi-meter; Frequency meter
Rev 04.15
31
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
B3510-S – AC MOTOR CONTROL
The B3510-S module includes an AC micro-motor and drive circuit. It is designed to allow the
student to study the applications, principles and limitations of these transducers. The panel
includes a variable-frequency, digital PWM sine/square signal generator that is used as a
pilot signal for the power driver stage.
The power driver stage produces the two voltages for the motor phases. An optical encoder
is supplied to measure motor speed.
The clear component layout and rugged construction renders this unit particularly ideal for
the most demanding of classroom conditions.
Features: Two-phase AC micro-motor; Variable-frequency clock generator; Digital
sine/square signal generator; Pulse conditioners; Power output stages
The B3510-S module comes complete with a connection cable kit and extensive instructions
manual.
Experiment and study subjects: The motor; Motor driving techniques; Timing generation
stage; EPROM address generation; Synthesized wave shake; Operation of the drive with
square-waves; Operation of the drive with sine-waves
The B3510-S requires a +15, -15V stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules.
Optional accessories: Dual trace oscilloscope; multi-meter; Frequency meter
B3510-G – DC MOTOR SPEED CONTROL
The B3510-G module incorporates all the sub-systems necessary for the study of DC
motor speed control in both open and closed-loop set-ups. The module has two small DC
motors ganged together. One is used as the drive motor and the other as a tachometric
generator. A slot-type optical feedback sensor is also mechanically ganged to a DC motor.
The small motors ensure safe operation in all circumstances, this is important when the
student has little experience.
The clear component layout and rugged construction renders this unit particularly ideal
for the most demanding of classroom conditions.
Features: 2 small-size mechanically ganged DC motors. One of the two operates as a
tachometric generator, or as a load; Slot-type optical sensor and encoder disk. This
arrangement provides 8 pulses per motor revolution.; Frequency-to-voltage converter for
the encoder signal; Tacho-generator signal conditioner; DC reference generator; Loop
amplifier with adjustable gain; Switch mode power driver for the motor
The B3510-G board comes complete with a connection cable kit and extensive
instructions manual.
Exercises and study subjects: Open and closed-loop speed control; Speed sensors:
encoders and tacho-generators; Adjustment of gain in a closed-loop system; System response versus loop-gain; Operation of a power switch mode driver
The B3510-G requires a +15, -15V stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules.
Optional accessories: Dual trace oscilloscope; multi-meter
B3510-P – ROTATIONAL POSITION ENCODERS
The B3510-P module is an educational version of an industrial type optical encoder. This
allows the student to study the function and use of this type of device
The clear component layout and rugged construction renders this unit particularly ideal
for the most demanding of classroom conditions.
Features: Hand-driven rotating transparent plastic disk, which has darkened (blinded)
segments and sectors, that obscure a set of 5 phototransistors placed beneath the disk;
The encoder is illuminated by a set of 5 LED lamps from above; Absolute decoder, with a
7-segments display; Relative decoder; Up/down step counting logic and display; Reset
pushbutton; The relative encoder circuit is also equipped with step doubler and
quadrupler and relevant display (micro steps)
The B3510-P module comes complete with a connection cable kit and extensive
instructions manual.
Experiment and study subjects: The items of this module are of a quite general use in
the industry. The student is made to become quickly acquainted with their principle of
operation, characteristics and limits of use.
The B3510-P requires a +15 stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules.
Optional accessories: Dual trace oscilloscope; multi-meter
Rev 04.15
32
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
B3510-J – POSITION CONTROL
This module includes a geared DC motor (approx. 1 revolution per second), which
operates a screw-driven mechanism, ganged to the slide of a linear
potentiometer. A second linear potentiometer allows the setting the reference
position. This set-up enables the student to study the benefits and limitations of a
closed-loop position control system. The clear component layout and rugged
construction renders this unit particularly ideal for the most demanding of
classroom conditions.
Features: Mechanically simulated position system; Summing node for the
reference and feedback signals; Loop amplifier, gain-adjustable; Power
amplifier/DC driver; Power supply conditioner and control circuit
The B3510-J module comes complete with a connection cable kit and extensive
instructions manual.
Experiments and study subjects: Characteristics of various transducers: linear
potentiometer and gear motor; Set-up of a linear position control system; System
response versus loop gain; Practical safety precautions for position systems: run
limits, power supply control and motor switch off to prevent motor stall
The B3510-J requires a +15, -15V stabilized power supply. The B4191 power
supply is recommended, as for all the B3510 series modules.
Optional accessories: Dual trace oscilloscope; multi-meter
APPLICATION WITH PLC
PLC AND SCADA
ACQUISITION MODULE AND CONTROLS SCADA
The system consists of data acquisition module and terminal boards with clear educational synoptic for easy wiring and
programming.
The kit includes:
1 Port COM RS23 - 1 port MiniUSB Processor NXP LPC2387
6 digital isolated input (1 counter 10 kHz) - 2 analog Input 0-10Vdc - 4 digital isolated Output Relè
1 expansion bus I2C High-speed, 16 digital input, 8 digital Output, 5 analog input, 4 analog output
programming tool included,
Programming cable
220/12 V Adapter
Software Programming Ladder Diagram (LD), Instruction List (IL) / C language, SCADA SOFTWARE
Option :
•
Touch screen LCD Display
•
Ethernet port for local network/internet connection
•
I/O simulator with switch push button and LEDS
possibility of using other PLC of your choice
Rev 04.15
33
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
Motor control simulator type CONTMOT / SIM
Simulator for motor control panel with synoptic including :
N. 4 contactors, N. 1 thermal relay, N. 4 signal lamps, N. 4 buttons (forward, reverse, stop, emergency), No 1
tachometer 3 ½ digits with sensor mounted on the motor with two selectable alarms, N. 1 Three-phase cage induction
motor 42V - 200W, N. 1 three-phase transformer 380/42 V.
It is required a PLC with at least 8 inputs and 8 outputs. The simulator allows to start the motor star / delta in rotation
braking version.
AUTOMATION
see dedicated catalog
SENSORS - TRANSDUCTORS
SIMULATORS PLC CONTROLLED
ARDUINO
Rev 04.15
RASPBERRY
3D PRINTER
34
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
THERMOTRONICS
see dedicated catalog
Rev 04.15
35
SAMAR S.R.L. WEB: WWW.SAMAR-INSTRUMENTS.IT
VIA DELLA PACE N. 25 FR. ZIVIDO - 20098 SAN GIULIANO MILANESE - MILANO – ITALY
Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: info@samar-instruments.it
CATALOGO ON LINE: www.samarinternet.com
Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments
WORKSTATIONS
On request customized versions - see special dedicated documentation
Position turret pleasure central, lateral, short or long side
Rev 04.15
36